From 97312778a09decf65030e994e72ce07434ce0f07 Mon Sep 17 00:00:00 2001
From: merakor <cem@ckyln.com>
Date: Thu, 4 Feb 2021 14:30:43 +0000
Subject: cpt: switch back to 'make'

FossilOrigin-Name: 048c099fa4155f31725c51c27b09359d7b04f4c2d7e64f2a2b381ab7dea7803d
---
 tools/do | 446 ---------------------------------------------------------------
 1 file changed, 446 deletions(-)
 delete mode 100755 tools/do

(limited to 'tools')

diff --git a/tools/do b/tools/do
deleted file mode 100755
index f38a2a7..0000000
--- a/tools/do
+++ /dev/null
@@ -1,446 +0,0 @@
-#!/bin/sh
-#
-# A minimal alternative to djb redo that doesn't support incremental builds.
-# For the full version, visit http://github.com/apenwarr/redo
-#
-# The author disclaims copyright to this source file and hereby places it in
-# the public domain. (2010 12 14; updated 2019 02 24)
-#
-USAGE="
-usage: do [-d] [-x] [-v] [-c] <targets...>
-  -d  print extra debug messages (mostly about dependency checks)
-  -v  run .do files with 'set -v'
-  -x  run .do files with 'set -x'
-  -c  clean up all old targets before starting
-
-  Note: do is an implementation of redo that does *not* check dependencies.
-  It will never rebuild a target it has already built, unless you use -c.
-"
-
-# CDPATH apparently causes unexpected 'cd' output on some platforms.
-unset CDPATH
-
-# By default, no output coloring.
-green=""
-bold=""
-plain=""
-
-if [ -n "$TERM" -a "$TERM" != "dumb" ] && tty <&2 >/dev/null 2>&1; then
-	green="$(printf '\033[32m')"
-	bold="$(printf '\033[1m')"
-	plain="$(printf '\033[m')"
-fi
-
-# The 'seq' command is not available on all platforms.
-_seq() {
-	local x=0 max="$1"
-	while [ "$x" -lt "$max" ]; do
-		x=$((x + 1))
-		echo "$x"
-	done
-}
-
-# Split $1 into a dir part ($_dirsplit_dir) and base filename ($_dirsplit_base)
-_dirsplit() {
-	_dirsplit_base=${1##*/}
-	_dirsplit_dir=${1%$_dirsplit_base}
-}
-
-# Like /usr/bin/dirname, but avoids a fork and uses _dirsplit semantics.
-qdirname() (
-	_dirsplit "$1"
-	dir=${_dirsplit_dir%/}
-	echo "${dir:-.}"
-)
-
-_dirsplit "$0"
-REDO=$(cd "$(pwd -P)" &&
-	cd "${_dirsplit_dir:-.}" &&
-	echo "$PWD/$_dirsplit_base")
-export REDO
-_cmd=$_dirsplit_base
-
-DO_TOP=
-if [ -z "$DO_BUILT" ]; then
-	export _do_opt_debug=
-	export _do_opt_exec=
-	export _do_opt_verbose=
-	export _do_opt_clean=
-fi
-while getopts 'dxvcj:h?' _opt; do
-	case $_opt in
-		d) _do_opt_debug=1 ;;
-		x) _do_opt_exec=x ;;
-		v) _do_opt_verbose=v ;;
-		c) _do_opt_clean=1 ;;
-		j) ;;  # silently ignore, for compat with real redo
-		\?|h|*) printf "%s" "$USAGE" >&2
-		   exit 99
-		   ;;
-	esac
-done
-shift "$((OPTIND - 1))"
-_debug() {
-	[ -z "$_do_opt_debug" ] || echo "$@" >&2
-}
-
-if [ -z "$DO_BUILT" -a "$_cmd" != "redo-whichdo" ]; then
-	DO_TOP=1
-	if [ "$#" -eq 0 ] && [ "$_cmd" = "do" -o "$_cmd" = "redo" ]; then
-		set all  # only toplevel redo has a default target
-	fi
-	export DO_STARTDIR="$(pwd -P)"
-	# If starting /bin/pwd != $PWD, this will fix it.
-	# That can happen when $PWD contains symlinks that the shell is
-	# trying helpfully (but unsuccessfully) to hide from the user.
-	cd "$DO_STARTDIR" || exit 99
-	export DO_BUILT="$PWD/.do_built"
-	if [ -z "$_do_opt_clean" -a -e "$DO_BUILT" ]; then
-		echo "do: Incremental mode. Use -c for clean rebuild." >&2
-	fi
-	: >>"$DO_BUILT"
-	sort -u "$DO_BUILT" >"$DO_BUILT.new"
-	while read f; do
-		[ -n "$_do_opt_clean" ] && printf "%s\0%s.did\0" "$f" "$f"
-		printf "%s.did.tmp\0" "$f"
-	done <"$DO_BUILT.new" |
-	xargs -0 rm -f 2>/dev/null
-	mv "$DO_BUILT.new" "$DO_BUILT"
-	export DO_PATH="$DO_BUILT.dir"
-	export PATH="$DO_PATH:$PATH"
-	rm -rf "$DO_PATH"
-	mkdir "$DO_PATH"
-	for d in redo redo-ifchange redo-whichdo; do
-		ln -s "$REDO" "$DO_PATH/$d"
-	done
-	for d in redo-ifcreate redo-stamp redo-always redo-ood \
-	    redo-targets redo-sources; do
-	        echo "#!/bin/sh" >"$DO_PATH/$d"
-		chmod a+rx "$DO_PATH/$d"
-	done
-fi
-
-
-# Chop the "file" part off a /path/to/file pathname.
-# Note that if the filename already ends in a /, we just remove the slash.
-_updir()
-{
-	local v="${1%/*}"
-	[ "$v" != "$1" ] && echo "$v"
-	# else "empty" which means we went past the root
-}
-
-
-# Returns true if $1 starts with $2.
-_startswith()
-{
-	[ "${1#"$2"}" != "$1" ]
-}
-
-
-# Returns true if $1 ends with $2.
-_endswith()
-{
-	[ "${1%"$2"}" != "$1" ]
-}
-
-
-# Prints $1 if it's absolute, or $2/$1 if $1 is not absolute.
-_abspath()
-{
-	local here="$2" there="$1"
-	if _startswith "$1" "/"; then
-		echo "$1"
-	else
-		echo "$2/$1"
-	fi
-}
-
-
-# Prints $1 as a path relative to $PWD (not starting with /).
-# If it already doesn't start with a /, doesn't change the string.
-_relpath()
-{
-	local here="$2" there="$1" out= hadslash=
-	#echo "RP start '$there' hs='$hadslash'" >&2
-	_startswith "$there" "/" || { echo "$there" && return; }
-	[ "$there" != "/" ] && _endswith "$there" "/" && hadslash=/
-	here=${here%/}/
-	while [ -n "$here" ]; do
-		#echo "RP out='$out' here='$here' there='$there'" >&2
-		[ "${here%/}" = "${there%/}" ] && there= && break;
-		[ "${there#$here}" != "$there" ] && break
-		out=../$out
-		_dirsplit "${here%/}"
-		here=$_dirsplit_dir
-	done
-	there=${there#$here}
-	if [ -n "$there" ]; then
-		echo "$out${there%/}$hadslash"
-	else
-		echo "${out%/}$hadslash"
-	fi
-}
-
-
-# Prints a "normalized relative" path, with ".." resolved where possible.
-# For example, a/b/../c will be reduced to just a/c.
-_normpath()
-(
-	local path="$1" relto="$2" out= isabs=
-	#echo "NP start '$path'" >&2
-	if _startswith "$path" "/"; then
-		isabs=1
-	else
-		path="${relto%/}/$path"
-	fi
-	set -f
-	IFS=/
-	for d in ${path%/}; do
-		#echo "NP out='$out' d='$d'" >&2
-		if [ "$d" = ".." ]; then
-			out=$(_updir "${out%/}")/
-		else
-			out=$out$d/
-		fi
-	done
-	#echo "NP out='$out' (done)" >&2
-	out=${out%/}
-	if [ -n "$isabs" ]; then
-		echo "${out:-/}"
-	else
-		_relpath "${out:-/}" "$relto"
-	fi
-)
-
-
-# Prints a "real" path, with all symlinks resolved where possible.
-_realpath()
-{
-	local path="$1" relto="$2" isabs= rest=
-	if _startswith "$path" "/"; then
-		isabs=1
-	else
-		path="${relto%/}/$path"
-	fi
-	(
-		for d in $(_seq 100); do
-			#echo "Trying: $PWD--$path" >&2
-			if cd -P "$path" 2>/dev/null; then
-				# success
-				pwd=$(pwd -P)
-				#echo "  chdir ok: $pwd--$rest" >&2
-				np=$(_normpath "${pwd%/}/$rest" "$relto")
-				if [ -n "$isabs" ]; then
-					echo "$np"
-				else
-					_relpath "$np" "$relto"
-				fi
-				break
-			fi
-			_dirsplit "${path%/}"
-			path=$_dirsplit_dir
-			rest="$_dirsplit_base/$rest"
-		done
-	)
-}
-
-
-# List the possible names for default*.do files in dir $1 matching the target
-# pattern in $2.  We stop searching when we find the first one that exists.
-_find_dofiles_pwd()
-{
-	local dodir="$1" dofile="$2"
-	_startswith "$dofile" "default." || dofile=${dofile#*.}
-	while :; do
-		dofile=default.${dofile#default.*.}
-		echo "$dodir$dofile"
-		[ -e "$dodir$dofile" ] && return 0
-		[ "$dofile" = default.do ] && break
-	done
-	return 1
-}
-
-
-# List the possible names for default*.do files in $PWD matching the target
-# pattern in $1.  We stop searching when we find the first name that works.
-# If there are no matches in $PWD, we'll search in .., and so on, to the root.
-_find_dofiles()
-{
-	local target="$1" dodir= dofile= newdir=
-	_debug "find_dofile: '$PWD' '$target'"
-	dofile="$target.do"
-	echo "$dofile"
-	[ -e "$dofile" ] && return 0
-
-	# Try default.*.do files, walking up the tree
-	_dirsplit "$dofile"
-	dodir=$_dirsplit_dir
-	dofile=$_dirsplit_base
-	[ -n "$dodir" ] && dodir=${dodir%/}/
-	[ -e "$dodir$dofile" ] && return 0
-	for i in $(_seq 100); do
-		[ -n "$dodir" ] && dodir=${dodir%/}/
-		#echo "_find_dofiles: '$dodir' '$dofile'" >&2
-		_find_dofiles_pwd "$dodir" "$dofile" && return 0
-		newdir=$(_realpath "${dodir}.." "$PWD")
-		[ "$newdir" = "$dodir" ] && break
-		dodir=$newdir
-	done
-	return 1
-}
-
-
-# Print the last .do file returned by _find_dofiles.
-# If that file exists, returns 0, else 1.
-_find_dofile()
-{
-	local files="$(_find_dofiles "$1")"
-	rv=$?
-	#echo "files='$files'" >&2
-	[ "$rv" -ne 0 ] && return $rv
-	echo "$files" | {
-		while read -r linex; do line=$linex; done
-		printf "%s\n" "$line"
-	}
-}
-
-
-# Actually run the given $dofile with the arguments in $@.
-# Note: you should always run this in a subshell.
-_run_dofile()
-{
-	export DO_DEPTH="$DO_DEPTH  "
-	export REDO_TARGET="$PWD/$target"
-	local line1
-	set -e
-	read line1 <"$PWD/$dofile" || true
-	cmd=${line1#"#!/"}
-	if [ "$cmd" != "$line1" ]; then
-		set -$_do_opt_verbose$_do_opt_exec
-		exec /$cmd "$PWD/$dofile" "$@"
-	else
-		set -$_do_opt_verbose$_do_opt_exec
-		# If $dofile is empty, "." might not change $? at
-		# all, so we clear it first with ":".
-		:; . "$PWD/$dofile"
-	fi
-}
-
-
-# Find and run the right .do file, starting in dir $1, for target $2,
-# providing a temporary output file as $3.  Renames the temp file to $2 when
-# done.
-_do()
-{
-	local dir="$1" target="$1$2" tmp="$1$2.redo.tmp" tdir=
-	local dopath= dodir= dofile= ext=
-	if [ "$_cmd" = "redo" ] ||
-	    ( [ ! -e "$target" -o -d "$target" ] &&
-	      [ ! -e "$target.did" ] ); then
-		printf '%sdo  %s%s%s%s\n' \
-			"$green" "$DO_DEPTH" "$bold" "$target" "$plain" >&2
-		dopath=$(_find_dofile "$target")
-		if [ ! -e "$dopath" ]; then
-			echo "do: $target: no .do file ($PWD)" >&2
-			return 1
-		fi
-		_dirsplit "$dopath"
-		dodir=$_dirsplit_dir dofile=$_dirsplit_base
-		if _startswith "$dofile" "default."; then
-			ext=${dofile#default}
-			ext=${ext%.do}
-		else
-			ext=
-		fi
-		target=$PWD/$target
-		tmp=$PWD/$tmp
-		cd "$dodir" || return 99
-		target=$(_relpath "$target" "$PWD") || return 98
-		tmp=$(_relpath "$tmp" "$PWD") || return 97
-		base=${target%$ext}
-		tdir=$(qdirname "$target")
-		[ ! -e "$DO_BUILT" ] || [ ! -w "$tdir/." ] ||
-		: >>"$target.did.tmp"
-		# $qtmp is a temporary file used to capture stdout.
-		# Since it might be accidentally deleted as a .do file
-		# does its work, we create it, then open two fds to it,
-		# then immediately delete the name.  We use one fd to
-		# redirect to stdout, and the other to read from after,
-		# because there's no way to fseek(fd, 0) in sh.
-		qtmp=$DO_PATH/do.$$.tmp
-		(
-			rm -f "$qtmp"
-			( _run_dofile "$target" "$base" "$tmp" >&3 3>&- 4<&- )
-			rv=$?
-			if [ $rv != 0 ]; then
-				printf "do: %s%s\n" "$DO_DEPTH" \
-					"$target: got exit code $rv" >&2
-				rm -f "$tmp.tmp" "$tmp.tmp2" "$target.did"
-				return $rv
-			fi
-			echo "$PWD/$target" >>"$DO_BUILT"
-			if [ ! -e "$tmp" ]; then
-				# if $3 wasn't created, copy from stdout file
-				cat <&4 >$tmp
-				# if that's zero length too, forget it
-				[ -s "$tmp" ] || rm -f "$tmp"
-			fi
-		) 3>$qtmp 4<$qtmp  # can't use "|| return" here...
-		# ...because "|| return" would mess up "set -e" inside the ()
-		# on some shells.  Running commands in "||" context, even
-		# deep inside, will stop "set -e" from functioning.
-		rv=$?
-		[ "$rv" = 0 ] || return "$rv"
-		mv "$tmp" "$target" 2>/dev/null
-		[ -e "$target.did.tmp" ] &&
-		mv "$target.did.tmp" "$target.did" ||
-		: >>"$target.did"
-	else
-		_debug "do  $DO_DEPTH$target exists." >&2
-	fi
-}
-
-
-# Implementation of the "redo" command.
-_redo()
-{
-	local i startdir="$PWD" dir base
-	set +e
-	for i in "$@"; do
-		i=$(_abspath "$i" "$startdir")
-		(
-			cd "$DO_STARTDIR" || return 99
-			i=$(_realpath "$(_relpath "$i" "$PWD")" "$PWD")
-			_dirsplit "$i"
-			dir=$_dirsplit_dir base=$_dirsplit_base
-			_do "$dir" "$base"
-		)
-		[ "$?" = 0 ] || return 1
-	done
-}
-
-
-# Implementation of the "redo-whichdo" command.
-_whichdo()
-{
-	_find_dofiles "$1"
-}
-
-
-case $_cmd in
-	do|redo|redo-ifchange) _redo "$@" ;;
-	redo-whichdo) _whichdo "$1" ;;
-	do.test) ;;
-	*) printf "do: '%s': unexpected redo command" "$_cmd" >&2; exit 99 ;;
-esac
-[ "$?" = 0 ] || exit 1
-
-if [ -n "$DO_TOP" ]; then
-	if [ -n "$_do_opt_clean" ]; then
-		echo "do: Removing stamp files..." >&2
-		[ ! -e "$DO_BUILT" ] ||
-		while read f; do printf "%s.did\0" "$f"; done <"$DO_BUILT" |
-		xargs -0 rm -f 2>/dev/null
-	fi
-fi
-- 
cgit v1.2.3