Update docs

2 files changed, 68 insertions, 39 deletions

diff --git a/docs/busybox_footer.pod b/docs/busybox_footer.pod
index d243a92d9..4f1058573 100644
--- a/docs/busybox_footer.pod
+++ b/docs/busybox_footer.pod
@@ -1,23 +1,5 @@
 =back
 
-=head1 LIBC NSS
-
-GNU Libc uses the Name Service Switch (NSS) to configure the behavior of the C
-library for the local environment, and to configure how it reads system data,
-such as passwords and group information.  BusyBox has made it Policy that it
-will never use NSS, and will never use and libc calls that make use of NSS.
-This allows you to run an embedded system without the need for installing an
-/etc/nsswitch.conf file and without and /lib/libnss_* libraries installed.
-
-If you are using a system that is using a remote LDAP server for authentication
-via GNU libc NSS, and you want to use BusyBox, then you will need to adjust the
-BusyBox source.  Chances are though, that if you have enough space to install
-of that stuff on your system, then you probably want the full GNU utilities.
-
-=head1 SEE ALSO
-
-textutils(1), shellutils(1), etc...
-
 =head1 MAINTAINER
 
 Erik Andersen <andersen@codepoet.org>
@@ -173,4 +155,4 @@ Glenn Engel <glenne@engel.org>
 
 =cut
 
-# $Id: busybox_footer.pod,v 1.13 2004/03/13 08:32:14 andersen Exp $
+# $Id: busybox_footer.pod,v 1.14 2004/03/27 09:40:15 andersen Exp $
diff --git a/docs/busybox_header.pod b/docs/busybox_header.pod
index 132aa3b65..395e2c81a 100644
--- a/docs/busybox_header.pod
+++ b/docs/busybox_header.pod
@@ -14,42 +14,67 @@ BusyBox - The Swiss Army Knife of Embedded Linux
 
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for most of the utilities
-you usually find in fileutils, shellutils, findutils, textutils, grep, gzip,
-tar, etc.  BusyBox provides a fairly complete POSIX environment for any small
-or embedded system.  The utilities in BusyBox generally have fewer options than
-their full-featured GNU cousins; however, the options that are included provide
-the expected functionality and behave very much like their GNU counterparts.
+you usually find in GNU coreutils, util-linux, etc. The utilities in BusyBox
+generally have fewer options than their full-featured GNU cousins; however, the
+options that are included provide the expected functionality and behave very
+much like their GNU counterparts. BusyBox provides a fairly complete POSIX
+environment for any small or embedded system.
 
 BusyBox has been written with size-optimization and limited resources in mind.
 It is also extremely modular so you can easily include or exclude commands (or
-features) at compile time.  This makes it easy to customize your embedded
-systems.  To create a working system, just add a kernel, a shell (such as ash),
-and an editor (such as elvis-tiny or ae).
+features) at compile time. This makes it easy to customize your embedded
+systems. To create a working system, just add /dev, /etc, and a Linux kernel.
+
+BusyBox is extremely configurable.  This allows you to include only the
+components you need, thereby reducing binary size. Run 'make config' or 'make
+menuconfig' for select the functionality that you wish to enable.  The run
+'make' to compile BusyBox using your configuration.
+
+After the compile has finished, you should use 'make install' to install
+BusyBox.  This will install the '/bin/busybox' binary, and will also create
+symlinks pointing to the '/bin/busybox' binary for each utility that you
+compile into BusyBox.  By default, 'make install' will place these symlinks
+into the './_install' directory, unless you have defined 'PREFIX', thereby
+specifying some alternative location (i.e., 'make PREFIX=/tmp/foo install').
+If you wish to install using hardlinks, rather than the default of using
+symlinks, you can use 'make PREFIX=/tmp/foo install-hardlinks' instead.
 
 =head1 USAGE
 
-When you create a link to BusyBox for the function you wish to use, when BusyBox
-is called using that link it will behave as if the command itself has been invoked.
+BusyBox is a multi-call binary.  A multi-call binary is an executable program
+that performs the same job as more than one utility program.  That means there
+is just a single BusyBox binary, but that single binary acts like a large
+number of utilities.  This allows BusyBox to be smaller since all the built-in
+utility programs (we call them applets) can share code for many common operations.
+
+You can also invoke BusyBox by issuing the command as an argument on the
+command line.  For example, entering
+
+	/bin/busybox ls
+
+will also cause BusyBox to behave as 'ls'.
+
+Of course, adding '/bin/busybox' into every command would be painful.  So most
+people will invoke BusyBox using links to the BusyBox binary.
 
 For example, entering
 
-	ln -s ./BusyBox ls
+	ln -s /bin/busybox ls
 	./ls
 
 will cause BusyBox to behave as 'ls' (if the 'ls' command has been compiled
-into BusyBox).
-
-You can also invoke BusyBox by issuing the command as an argument on the
-command line.  For example, entering
+into BusyBox).  Generally speaking, you should never need to make all these
+links yourself, as the BusyBox build system will do this for you when you run
+the 'make install' command.
 
-	./BusyBox ls
-
-will also cause BusyBox to behave as 'ls'.
+If you invoke BusyBox with no arguments, it will provide you with a list of the
+applets that have been compiled into your BusyBox binary.
 
 =head1 COMMON OPTIONS
 
-Most BusyBox commands support the B<-h> option to provide a
-terse runtime description of their behavior.
+Most BusyBox commands support the B<--help> argument to provide a terse runtime
+description of their behavior.  If the CONFIG_FEATURE_VERBOSE_USAGE option has
+been enabled, more detailed usage information will also be available.
 
 =head1 COMMANDS
 
@@ -80,4 +105,26 @@ Currently defined functions include:
 
 =over 4
 
+=head1 LIBC NSS
+
+GNU Libc (glibc) uses the Name Service Switch (NSS) to configure the behavior
+of the C library for the local environment, and to configure how it reads
+system data, such as passwords and group information.  This is implemented
+using an /etc/nsswitch.conf configuration file, and using one or more of the
+/lib/libnss_* libraries.  BusyBox tries to avoid using any libc calls that make
+use of NSS.  Some applets, such as login and su, will use libc functions that
+usually require NSS.
+
+If you enable CONFIG_USE_BB_PWD_GRP, BusyBox will use internal functions to
+directly access the /etc/passwd, /etc/group, and /etc/shadow files without
+using NSS.  This may allow you to run your system without the need for
+installing any of the NSS configuration files and libraries.
+
+When used with glibc, the BusyBox 'networking' applets will similarly require
+that you install at least some of the glibc NSS stuff (in particular,
+/etc/nsswitch.conf, /lib/libnss_dns*, /lib/libnss_files*, and /lib/libresolv*).
+
+Shameless Plug: As an alternative one could use a C library such as uClibc.  In
+addition to making your system significantly smaller, uClibc does not need or
+use any NSS support files or libraries.