diff options
Diffstat (limited to 'archival')
| -rw-r--r-- | archival/gzip.c | 909 |
1 files changed, 463 insertions, 446 deletions
diff --git a/archival/gzip.c b/archival/gzip.c index 48d1652bc..aa88fd7e5 100644 --- a/archival/gzip.c +++ b/archival/gzip.c @@ -67,11 +67,11 @@ aa: 85.1% -- replaced with aa.gz */ #define SMALL_MEM -/* Compression methods (see algorithm.doc) */ -/* Only STORED and DEFLATED are supported by this BusyBox module */ -#define STORED 0 -/* methods 4 to 7 reserved */ -#define DEFLATED 8 +//// /* Compression methods (see algorithm.doc) */ +//// /* Only STORED and DEFLATED are supported by this BusyBox module */ +//// #define STORED 0 +//// /* methods 4 to 7 reserved */ +//// #define DEFLATED 8 #ifndef INBUFSIZ # ifdef SMALL_MEM @@ -195,42 +195,9 @@ typedef uint16_t ush; typedef uint32_t ulg; typedef int32_t lng; - -/* =========================================================================== - */ typedef ush Pos; typedef unsigned IPos; -/* A Pos is an index in the character window. We use short instead of int to - * save space in the various tables. IPos is used only for parameter passing. - */ - -static lng block_start; - -/* window position at the beginning of the current output block. Gets - * negative when the window is moved backwards. - */ - -static unsigned ins_h; /* hash index of string to be inserted */ - -#define H_SHIFT ((HASH_BITS+MIN_MATCH-1) / MIN_MATCH) -/* Number of bits by which ins_h and del_h must be shifted at each - * input step. It must be such that after MIN_MATCH steps, the oldest - * byte no longer takes part in the hash key, that is: - * H_SHIFT * MIN_MATCH >= HASH_BITS - */ - -static unsigned int prev_length; - -/* Length of the best match at previous step. Matches not greater than this - * are discarded. This is used in the lazy match evaluation. - */ - -static unsigned strstart; /* start of string to insert */ -static unsigned match_start; /* start of matching string */ -static int eofile; /* flag set at end of input file */ -static unsigned lookahead; /* number of valid bytes ahead in window */ - enum { WINDOW_SIZE = 2 * WSIZE, /* window size, 2*WSIZE except for MMAP or BIG_MEM, where it is the @@ -271,30 +238,53 @@ enum { }; +struct G1 { + +/* A Pos is an index in the character window. We use short instead of int to + * save space in the various tables. IPos is used only for parameter passing. + */ + lng block_start; + +/* window position at the beginning of the current output block. Gets + * negative when the window is moved backwards. + */ + unsigned ins_h; /* hash index of string to be inserted */ + +#define H_SHIFT ((HASH_BITS+MIN_MATCH-1) / MIN_MATCH) +/* Number of bits by which ins_h and del_h must be shifted at each + * input step. It must be such that after MIN_MATCH steps, the oldest + * byte no longer takes part in the hash key, that is: + * H_SHIFT * MIN_MATCH >= HASH_BITS + */ + + unsigned prev_length; + +/* Length of the best match at previous step. Matches not greater than this + * are discarded. This is used in the lazy match evaluation. + */ + + unsigned strstart; /* start of string to insert */ + unsigned match_start; /* start of matching string */ + unsigned lookahead; /* number of valid bytes ahead in window */ + smallint eofile; /* flag set at end of input file */ + /* =========================================================================== */ #define DECLARE(type, array, size) \ - static type * array - + type * array #define ALLOC(type, array, size) \ -{ \ - array = xzalloc((size_t)(((size)+1L)/2) * 2*sizeof(type)); \ -} - + array = xzalloc((size_t)(((size)+1L)/2) * 2*sizeof(type)); #define FREE(array) \ -{ \ - free(array); \ - array = NULL; \ -} + do { free(array); array = NULL; } while (0) -/* global buffers */ + /* global buffers */ -/* buffer for literals or lengths */ -/* DECLARE(uch, l_buf, LIT_BUFSIZE); */ -DECLARE(uch, l_buf, INBUFSIZ); + /* buffer for literals or lengths */ + /* DECLARE(uch, l_buf, LIT_BUFSIZE); */ + DECLARE(uch, l_buf, INBUFSIZ); -DECLARE(ush, d_buf, DIST_BUFSIZE); -DECLARE(uch, outbuf, OUTBUFSIZ); + DECLARE(ush, d_buf, DIST_BUFSIZE); + DECLARE(uch, outbuf, OUTBUFSIZ); /* Sliding window. Input bytes are read into the second half of the window, * and move to the first half later to keep a dictionary of at least WSIZE @@ -305,66 +295,68 @@ DECLARE(uch, outbuf, OUTBUFSIZ); * To do: limit the window size to WSIZE+BSZ if SMALL_MEM (the code would * be less efficient). */ -DECLARE(uch, window, 2L * WSIZE); + DECLARE(uch, window, 2L * WSIZE); /* Link to older string with same hash index. To limit the size of this * array to 64K, this link is maintained only for the last 32K strings. * An index in this array is thus a window index modulo 32K. */ -/* DECLARE(Pos, prev, WSIZE); */ -DECLARE(ush, prev, 1L << BITS); + /* DECLARE(Pos, prev, WSIZE); */ + DECLARE(ush, prev, 1L << BITS); /* Heads of the hash chains or 0. */ -/* DECLARE(Pos, head, 1<<HASH_BITS); */ -#define head (prev+WSIZE) /* hash head (see deflate.c) */ + /* DECLARE(Pos, head, 1<<HASH_BITS); */ +#define head (G1.prev + WSIZE) /* hash head (see deflate.c) */ /* number of input bytes */ -static ulg isize; /* only 32 bits stored in .gz file */ + ulg isize; /* only 32 bits stored in .gz file */ -static int foreground; /* set if program run in foreground */ -static int method = DEFLATED; /* compression method */ -static int exit_code; /* program exit code */ +//// int method = DEFLATED; /* compression method */ +//## int exit_code; /* program exit code */ /* original time stamp (modification time) */ -static ulg time_stamp; /* only 32 bits stored in .gz file */ + ulg time_stamp; /* only 32 bits stored in .gz file */ -static int ifd; /* input file descriptor */ -static int ofd; /* output file descriptor */ + int ifd; /* input file descriptor */ + int ofd; /* output file descriptor */ #ifdef DEBUG -static unsigned insize; /* valid bytes in l_buf */ + unsigned insize; /* valid bytes in l_buf */ #endif -static unsigned outcnt; /* bytes in output buffer */ + unsigned outcnt; /* bytes in output buffer */ -static uint32_t *crc_32_tab; + uint32_t *crc_32_tab; /* =========================================================================== * Local data used by the "bit string" routines. */ -//// static int zfile; /* output gzip file */ - -static unsigned short bi_buf; + unsigned short bi_buf; /* Output buffer. bits are inserted starting at the bottom (least significant * bits). */ #undef BUF_SIZE -#define BUF_SIZE (8 * sizeof(bi_buf)) +#define BUF_SIZE (8 * sizeof(G1.bi_buf)) /* Number of bits used within bi_buf. (bi_buf might be implemented on * more than 16 bits on some systems.) */ -static int bi_valid; + int bi_valid; /* Current input function. Set to mem_read for in-memory compression */ #ifdef DEBUG -static ulg bits_sent; /* bit length of the compressed data */ + ulg bits_sent; /* bit length of the compressed data */ #endif + uint32_t crc; /* shift register contents */ +}; + +static struct G1 G1; + /* =========================================================================== * Write the output buffer outbuf[0..outcnt-1] and update bytes_out. @@ -372,11 +364,11 @@ static ulg bits_sent; /* bit length of the compressed data */ */ static void flush_outbuf(void) { - if (outcnt == 0) + if (G1.outcnt == 0) return; - xwrite(ofd, (char *) outbuf, outcnt); - outcnt = 0; + xwrite(G1.ofd, (char *) G1.outbuf, G1.outcnt); + G1.outcnt = 0; } @@ -384,17 +376,17 @@ static void flush_outbuf(void) */ /* put_8bit is used for the compressed output */ #define put_8bit(c) \ -{ \ - outbuf[outcnt++] = (c); \ - if (outcnt == OUTBUFSIZ) flush_outbuf(); \ -} +do { \ + G1.outbuf[G1.outcnt++] = (c); \ + if (G1.outcnt == OUTBUFSIZ) flush_outbuf(); \ +} while (0) /* Output a 16 bit value, lsb first */ static void put_16bit(ush w) { - if (outcnt < OUTBUFSIZ - 2) { - outbuf[outcnt++] = w; - outbuf[outcnt++] = w >> 8; + if (G1.outcnt < OUTBUFSIZ - 2) { + G1.outbuf[G1.outcnt++] = w; + G1.outbuf[G1.outcnt++] = w >> 8; } else { put_8bit(w); put_8bit(w >> 8); @@ -412,11 +404,11 @@ static void put_32bit(ulg n) */ static void clear_bufs(void) { - outcnt = 0; + G1.outcnt = 0; #ifdef DEBUG - insize = 0; + G1.insize = 0; #endif - isize = 0; + G1.isize = 0; } @@ -425,15 +417,14 @@ static void clear_bufs(void) * pointer, then initialize the crc shift register contents instead. * Return the current crc in either case. */ -static uint32_t crc; /* shift register contents */ static uint32_t updcrc(uch * s, unsigned n) { - uint32_t c = crc; + uint32_t c = G1.crc; while (n) { - c = crc_32_tab[(uch)(c ^ *s++)] ^ (c >> 8); + c = G1.crc_32_tab[(uch)(c ^ *s++)] ^ (c >> 8); n--; } - crc = c; + G1.crc = c; return c; } @@ -447,14 +438,14 @@ static unsigned file_read(void *buf, unsigned size) { unsigned len; - Assert(insize == 0, "l_buf not empty"); + Assert(G1.insize == 0, "l_buf not empty"); - len = safe_read(ifd, buf, size); + len = safe_read(G1.ifd, buf, size); if (len == (unsigned)(-1) || len == 0) return len; updcrc(buf, len); - isize += len; + G1.isize += len; return len; } @@ -468,20 +459,20 @@ static void send_bits(int value, int length) #ifdef DEBUG Tracev((stderr, " l %2d v %4x ", length, value)); Assert(length > 0 && length <= 15, "invalid length"); - bits_sent += length; + G1.bits_sent += length; #endif /* If not enough room in bi_buf, use (valid) bits from bi_buf and * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) * unused bits in value. */ - if (bi_valid > (int) BUF_SIZE - length) { - bi_buf |= (value << bi_valid); - put_16bit(bi_buf); - bi_buf = (ush) value >> (BUF_SIZE - bi_valid); - bi_valid += length - BUF_SIZE; + if (G1.bi_valid > (int) BUF_SIZE - length) { + G1.bi_buf |= (value << G1.bi_valid); + put_16bit(G1.bi_buf); + G1.bi_buf = (ush) value >> (BUF_SIZE - G1.bi_valid); + G1.bi_valid += length - BUF_SIZE; } else { - bi_buf |= value << bi_valid; - bi_valid += length; + G1.bi_buf |= value << G1.bi_valid; + G1.bi_valid += length; } } @@ -509,15 +500,15 @@ static unsigned bi_reverse(unsigned code, int len) */ static void bi_windup(void) { - if (bi_valid > 8) { - put_16bit(bi_buf); - } else if (bi_valid > 0) { - put_8bit(bi_buf); + if (G1.bi_valid > 8) { + put_16bit(G1.bi_buf); + } else if (G1.bi_valid > 0) { + put_8bit(G1.bi_buf); } - bi_buf = 0; - bi_valid = 0; + G1.bi_buf = 0; + G1.bi_valid = 0; #ifdef DEBUG - bits_sent = (bits_sent + 7) & ~7; + G1.bits_sent = (G1.bits_sent + 7) & ~7; #endif } @@ -534,11 +525,11 @@ static void copy_block(char *buf, unsigned len, int header) put_16bit(len); put_16bit(~len); #ifdef DEBUG - bits_sent += 2 * 16; + G1.bits_sent += 2 * 16; #endif } #ifdef DEBUG - bits_sent += (ulg) len << 3; + G1.bits_sent += (ulg) len << 3; #endif while (len--) { put_8bit(*buf++); @@ -557,7 +548,7 @@ static void copy_block(char *buf, unsigned len, int header) static void fill_window(void) { unsigned n, m; - unsigned more = WINDOW_SIZE - lookahead - strstart; + unsigned more = WINDOW_SIZE - G1.lookahead - G1.strstart; /* Amount of free space at the end of the window. */ /* If the window is almost full and there is insufficient lookahead, @@ -568,25 +559,25 @@ static void fill_window(void) * and lookahead == 1 (input done one byte at time) */ more--; - } else if (strstart >= WSIZE + MAX_DIST) { + } else if (G1.strstart >= WSIZE + MAX_DIST) { /* By the IN assertion, the window is not empty so we can't confuse * more == 0 with more == 64K on a 16 bit machine. */ Assert(WINDOW_SIZE == 2 * WSIZE, "no sliding with BIG_MEM"); - memcpy(window, window + WSIZE, WSIZE); - match_start -= WSIZE; - strstart -= WSIZE; /* we now have strstart >= MAX_DIST: */ + memcpy(G1.window, G1.window + WSIZE, WSIZE); + G1.match_start -= WSIZE; + G1.strstart -= WSIZE; /* we now have strstart >= MAX_DIST: */ - block_start -= WSIZE; + G1.block_start -= WSIZE; for (n = 0; n < HASH_SIZE; n++) { m = head[n]; head[n] = (Pos) (m >= WSIZE ? m - WSIZE : 0); } for (n = 0; n < WSIZE; n++) { - m = prev[n]; - prev[n] = (Pos) (m >= WSIZE ? m - WSIZE : 0); + m = G1.prev[n]; + G1.prev[n] = (Pos) (m >= WSIZE ? m - WSIZE : 0); /* If n is not on any hash chain, prev[n] is garbage but * its value will never be used. */ @@ -594,12 +585,12 @@ static void fill_window(void) more += WSIZE; } /* At this point, more >= 2 */ - if (!eofile) { - n = file_read(window + strstart + lookahead, more); + if (!G1.eofile) { + n = file_read(G1.window + G1.strstart + G1.lookahead, more); if (n == 0 || n == (unsigned) -1) { - eofile = 1; + G1.eofile = 1; } else { - lookahead += n; + G1.lookahead += n; } } } @@ -621,11 +612,11 @@ static void fill_window(void) static int longest_match(IPos cur_match) { unsigned chain_length = max_chain_length; /* max hash chain length */ - uch *scan = window + strstart; /* current string */ + uch *scan = G1.window + G1.strstart; /* current string */ uch *match; /* matched string */ int len; /* length of current match */ - int best_len = prev_length; /* best match length so far */ - IPos limit = strstart > (IPos) MAX_DIST ? strstart - (IPos) MAX_DIST : 0; + int best_len = G1.prev_length; /* best match length so far */ + IPos limit = G1.strstart > (IPos) MAX_DIST ? G1.strstart - (IPos) MAX_DIST : 0; /* Stop when cur_match becomes <= limit. To simplify the code, * we prevent matches with the string of window index 0. */ @@ -636,19 +627,19 @@ static int longest_match(IPos cur_match) #if HASH_BITS < 8 || MAX_MATCH != 258 # error Code too clever #endif - uch *strend = window + strstart + MAX_MATCH; + uch *strend = G1.window + G1.strstart + MAX_MATCH; uch scan_end1 = scan[best_len - 1]; uch scan_end = scan[best_len]; /* Do not waste too much time if we already have a good match: */ - if (prev_length >= good_match) { + if (G1.prev_length >= good_match) { chain_length >>= 2; } - Assert(strstart <= WINDOW_SIZE - MIN_LOOKAHEAD, "insufficient lookahead"); + Assert(G1.strstart <= WINDOW_SIZE - MIN_LOOKAHEAD, "insufficient lookahead"); do { - Assert(cur_match < strstart, "no future"); - match = window + cur_match; + Assert(cur_match < G1.strstart, "no future"); + match = G1.window + cur_match; /* Skip to next match if the match length cannot increase * or if the match length is less than 2: @@ -679,14 +670,14 @@ static int longest_match(IPos cur_match) scan = strend - MAX_MATCH; if (len > best_len) { - match_start = cur_match; + G1.match_start = cur_match; best_len = len; if (len >= nice_match) break; scan_end1 = scan[best_len - 1]; scan_end = scan[best_len]; } - } while ((cur_match = prev[cur_match & WMASK]) > limit + } while ((cur_match = G1.prev[cur_match & WMASK]) > limit && --chain_length != 0); return best_len; @@ -700,14 +691,14 @@ static int longest_match(IPos cur_match) static void check_match(IPos start, IPos match, int length) { /* check that the match is indeed a match */ - if (memcmp(window + match, window + start, length) != 0) { + if (memcmp(G1.window + match, G1.window + start, length) != 0) { bb_error_msg(" start %d, match %d, length %d", start, match, length); bb_error_msg("invalid match"); } if (verbose > 1) { bb_error_msg("\\[%d,%d]", start - match, length); do { - putc(window[start++], stderr); + putc(G1.window[start++], stderr); } while (--length != 0); } } @@ -751,7 +742,7 @@ static void check_match(IPos start, IPos match, int length) * Addison-Wesley, 1983. ISBN 0-201-06672-6. * * INTERFACE - * void ct_init(ush *attr, int *methodp) + * void ct_init() //// ush *attr, int *methodp) * Allocate the match buffer, initialize the various tables and save * the location of the internal file attribute (ascii/binary) and * method (DEFLATE/STORE) @@ -807,6 +798,10 @@ static const extra_bits_t extra_dbits[D_CODES] = { static const extra_bits_t extra_blbits[BL_CODES] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 3, 7 }; +/* number of codes at each bit length for an optimal tree */ +static const uch bl_order[BL_CODES] = { + 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 }; + #define STORED_BLOCK 0 #define STATIC_TREES 1 #define DYN_TREES 2 @@ -875,20 +870,30 @@ typedef struct ct_data { #define HEAP_SIZE (2*L_CODES + 1) /* maximum heap size */ -////static int heap[HEAP_SIZE]; /* heap used to build the Huffman trees */ -////let's try this -static ush heap[HEAP_SIZE]; /* heap used to build the Huffman trees */ -static int heap_len; /* number of elements in the heap */ -static int heap_max; /* element of largest frequency */ +typedef struct tree_desc { + ct_data *dyn_tree; /* the dynamic tree */ + ct_data *static_tree; /* corresponding static tree or NULL */ + const extra_bits_t *extra_bits; /* extra bits for each code or NULL */ + int extra_base; /* base index for extra_bits */ + int elems; /* max number of elements in the tree */ + int max_length; /* max bit length for the codes */ + int max_code; /* largest code with non zero frequency */ +} tree_desc; + +struct G2 { + + ush heap[HEAP_SIZE]; /* heap used to build the Huffman trees */ + int heap_len; /* number of elements in the heap */ + int heap_max; /* element of largest frequency */ /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. * The same heap array is used to build all trees. */ -static ct_data dyn_ltree[HEAP_SIZE]; /* literal and length tree */ -static ct_data dyn_dtree[2 * D_CODES + 1]; /* distance tree */ + ct_data dyn_ltree[HEAP_SIZE]; /* literal and length tree */ + ct_data dyn_dtree[2 * D_CODES + 1]; /* distance tree */ -static ct_data static_ltree[L_CODES + 2]; + ct_data static_ltree[L_CODES + 2]; /* The static literal tree. Since the bit lengths are imposed, there is no * need for the L_CODES extra codes used during heap construction. However @@ -896,99 +901,94 @@ static ct_data static_ltree[L_CODES + 2]; * below). */ -static ct_data static_dtree[D_CODES]; + ct_data static_dtree[D_CODES]; /* The static distance tree. (Actually a trivial tree since all codes use * 5 bits.) */ -static ct_data bl_tree[2 * BL_CODES + 1]; + ct_data bl_tree[2 * BL_CODES + 1]; /* Huffman tree for the bit lengths */ -typedef struct tree_desc { - ct_data *dyn_tree; /* the dynamic tree */ - ct_data *static_tree; /* corresponding static tree or NULL */ - const extra_bits_t *extra_bits; /* extra bits for each code or NULL */ - int extra_base; /* base index for extra_bits */ - int elems; /* max number of elements in the tree */ - int max_length; /* max bit length for the codes */ - int max_code; /* largest code with non zero frequency */ -} tree_desc; - -static tree_desc l_desc = { - dyn_ltree, static_ltree, extra_lbits, - LITERALS + 1, L_CODES, MAX_BITS, 0 -}; + tree_desc l_desc; + tree_desc d_desc; + tree_desc bl_desc; -static tree_desc d_desc = { - dyn_dtree, static_dtree, extra_dbits, 0, D_CODES, MAX_BITS, 0 -}; - -static tree_desc bl_desc = { - bl_tree, NULL, extra_blbits, 0, BL_CODES, MAX_BL_BITS, 0 -}; - - -static ush bl_count[MAX_BITS + 1]; - -/* number of codes at each bit length for an optimal tree */ - -static const uch bl_order[BL_CODES] = { - 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 -}; + ush bl_count[MAX_BITS + 1]; /* The lengths of the bit length codes are sent in order of decreasing * probability, to avoid transmitting the lengths for unused bit length codes. */ -static uch depth[2 * L_CODES + 1]; + uch depth[2 * L_CODES + 1]; /* Depth of each subtree used as tie breaker for trees of equal frequency */ -static uch length_code[MAX_MATCH - MIN_MATCH + 1]; + uch length_code[MAX_MATCH - MIN_MATCH + 1]; /* length code for each normalized match length (0 == MIN_MATCH) */ -static uch dist_code[512]; + uch dist_code[512]; /* distance codes. The first 256 values correspond to the distances * 3 .. 258, the last 256 values correspond to the top 8 bits of * the 15 bit distances. */ -static int base_length[LENGTH_CODES]; + int base_length[LENGTH_CODES]; /* First normalized length for each code (0 = MIN_MATCH) */ -static int base_dist[D_CODES]; + int base_dist[D_CODES]; /* First normalized distance for each code (0 = distance of 1) */ -static uch flag_buf[LIT_BUFSIZE / 8]; + uch flag_buf[LIT_BUFSIZE / 8]; /* flag_buf is a bit array distinguishing literals from lengths in * l_buf, thus indicating the presence or absence of a distance. */ -static unsigned last_lit; /* running index in l_buf */ -static unsigned last_dist; /* running index in d_buf */ -static unsigned last_flags; /* running index in flag_buf */ -static uch flags; /* current flags not yet saved in flag_buf */ -static uch flag_bit; /* current bit used in flags */ + unsigned last_lit; /* running index in l_buf */ + unsigned last_dist; /* running index in d_buf */ + unsigned last_flags; /* running index in flag_buf */ + uch flags; /* current flags not yet saved in flag_buf */ + uch flag_bit; /* current bit used in flags */ /* bits are filled in flags starting at bit 0 (least significant). * Note: these flags are overkill in the current code since we don't * take advantage of DIST_BUFSIZE == LIT_BUFSIZE. */ -static ulg opt_len; /* bit length of current block with optimal trees */ -static ulg static_len; /* bit length of current block with static trees */ + ulg opt_len; /* bit length of current block with optimal trees */ + ulg static_len; /* bit length of current block with static trees */ + + ulg compressed_len; /* total bit length of compressed file */ -static ulg compressed_len; /* total bit length of compressed file */ +//// ush *file_type; /* pointer to UNKNOWN, BINARY or ASCII */ +//// int *file_method; /* pointer to DEFLATE or STORE */ + +}; + +static struct G2 *G2ptr; +#define G2 (*G2ptr) +/* { + .l_desc = { + G2.dyn_ltree, G2.static_ltree, extra_lbits, + LITERALS + 1, L_CODES, MAX_BITS, 0 + }, + .d_desc = { + G2.dyn_dtree, G2.static_dtree, extra_dbits, + 0, D_CODES, MAX_BITS, 0 + }, + .bl_desc = { + G2.bl_tree, NULL, extra_blbits, + 0, BL_CODES, MAX_BL_BITS, 0 + } +}; +*/ -static ush *file_type; /* pointer to UNKNOWN, BINARY or ASCII */ -static int *file_method; /* pointer to DEFLATE or STORE */ /* =========================================================================== */ @@ -1013,7 +1013,7 @@ static void compress_block(ct_data * ltree, ct_data * dtree); #endif #define D_CODE(dist) \ - ((dist) < 256 ? dist_code[dist] : dist_code[256 + ((dist)>>7)]) + ((dist) < 256 ? G2.dist_code[dist] : G2.dist_code[256 + ((dist)>>7)]) /* Mapping from a distance to a distance code. dist is the distance - 1 and * must not have side effects. dist_code[256] and dist_code[257] are never * used. @@ -1030,17 +1030,17 @@ static void init_block(void) /* Initialize the trees. */ for (n = 0; n < L_CODES; n++) - dyn_ltree[n].Freq = 0; + G2.dyn_ltree[n].Freq = 0; for (n = 0; n < D_CODES; n++) - dyn_dtree[n].Freq = 0; + G2.dyn_dtree[n].Freq = 0; for (n = 0; n < BL_CODES; n++) - bl_tree[n].Freq = 0; + G2.bl_tree[n].Freq = 0; - dyn_ltree[END_BLOCK].Freq = 1; - opt_len = static_len = 0; - last_lit = last_dist = last_flags = 0; - flags = 0; - flag_bit = 1; + G2.dyn_ltree[END_BLOCK].Freq = 1; + G2.opt_len = G2.static_len = 0; + G2.last_lit = G2.last_dist = G2.last_flags = 0; + G2.flags = 0; + G2.flag_bit = 1; } @@ -1055,30 +1055,30 @@ static void init_block(void) * the subtrees have equal frequency. This minimizes the worst case length. */ #define SMALLER(tree, n, m) \ (tree[n].Freq < tree[m].Freq \ - || (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) + || (tree[n].Freq == tree[m].Freq && G2.depth[n] <= G2.depth[m])) static void pqdownheap(ct_data * tree, int k) { - int v = heap[k]; + int v = G2.heap[k]; int j = k << 1; /* left son of k */ - while (j <= heap_len) { + while (j <= G2.heap_len) { /* Set j to the smallest of the two sons: */ - if (j < heap_len && SMALLER(tree, heap[j + 1], heap[j])) + if (j < G2.heap_len && SMALLER(tree, G2.heap[j + 1], G2.heap[j])) j++; /* Exit if v is smaller than both sons */ - if (SMALLER(tree, v, heap[j])) + if (SMALLER(tree, v, G2.heap[j])) break; /* Exchange v with the smallest son */ - heap[k] = heap[j]; + G2.heap[k] = G2.heap[j]; k = j; /* And continue down the tree, setting j to the left son of k */ j <<= 1; } - heap[k] = v; + G2.heap[k] = v; } @@ -1108,15 +1108,15 @@ static void gen_bitlen(tree_desc * desc) int overflow = 0; /* number of elements with bit length too large */ for (bits = 0; bits <= MAX_BITS; bits++) - bl_count[bits] = 0; + G2.bl_count[bits] = 0; /* In a first pass, compute the optimal bit lengths (which may * overflow in the case of the bit length tree). */ - tree[heap[heap_max]].Len = 0; /* root of the heap */ + tree[G2.heap[G2.heap_max]].Len = 0; /* root of the heap */ - for (h = heap_max + 1; h < HEAP_SIZE; h++) { - n = heap[h]; + for (h = G2.heap_max + 1; h < HEAP_SIZE; h++) { + n = G2.heap[h]; bits = tree[tree[n].Dad].Len + 1; if (bits > max_length) { bits = max_length; @@ -1128,15 +1128,15 @@ static void gen_bitlen(tree_desc * desc) if (n > max_code) continue; /* not a leaf node */ - bl_count[bits]++; + G2.bl_count[bits]++; xbits = 0; if (n >= base) xbits = extra[n - base]; f = tree[n].Freq; - opt_len += (ulg) f *(bits + xbits); + G2.opt_len += (ulg) f *(bits + xbits); if (stree) - static_len += (ulg) f * (stree[n].Len + xbits); + G2.static_len += (ulg) f * (stree[n].Len + xbits); } if (overflow == 0) return; @@ -1147,11 +1147,11 @@ static void gen_bitlen(tree_desc * desc) /* Find the first bit length which could increase: */ do { bits = max_length - 1; - while (bl_count[bits] == 0) + while (G2.bl_count[bits] == 0) bits--; - bl_count[bits]--; /* move one leaf down the tree */ - bl_count[bits + 1] += 2; /* move one overflow item as its brother */ - bl_count[max_length]--; + G2.bl_count[bits]--; /* move one leaf down the tree */ + G2.bl_count[bits + 1] += 2; /* move one overflow item as its brother */ + G2.bl_count[max_length]--; /* The brother of the overflow item also moves one step up, * but this does not affect bl_count[max_length] */ @@ -1164,14 +1164,14 @@ static void gen_bitlen(tree_desc * desc) * from 'ar' written by Haruhiko Okumura.) */ for (bits = max_length; bits != 0; bits--) { - n = bl_count[bits]; + n = G2.bl_count[bits]; while (n != 0) { - m = heap[--h]; + m = G2.heap[--h]; if (m > max_code) continue; if (tree[m].Len != (unsigned) bits) { Trace((stderr, "code %d bits %d->%d\n", m, tree[m].Len, bits)); - opt_len += ((int32_t) bits - tree[m].Len) * tree[m].Freq; + G2.opt_len += ((int32_t) bits - tree[m].Len) * tree[m].Freq; tree[m].Len = bits; } n--; @@ -1199,12 +1199,12 @@ static void gen_codes(ct_data * tree, int max_code) * without bit reversal. */ for (bits = 1; bits <= MAX_BITS; bits++) { - next_code[bits] = code = (code + bl_count[bits - 1]) << 1; + next_code[bits] = code = (code + G2.bl_count[bits - 1]) << 1; } /* Check that the bit counts in bl_count are consistent. The last code * must be all ones. */ - Assert(code + bl_count[MAX_BITS] - 1 == (1 << MAX_BITS) - 1, + Assert(code + G2.bl_count[MAX_BITS] - 1 == (1 << MAX_BITS) - 1, "inconsistent bit counts"); Tracev((stderr, "\ngen_codes: max_code %d ", max_code)); @@ -1216,7 +1216,7 @@ static void gen_codes(ct_data * tree, int max_code) /* Now reverse the bits */ tree[n].Code = bi_reverse(next_code[len]++, len); - Tracec(tree != static_ltree, + Tracec(tree != G2.static_ltree, (stderr, "\nn %3d %c l %2d c %4x (%x) ", n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len] - 1)); @@ -1240,11 +1240,11 @@ static void gen_codes(ct_data * tree, int max_code) /* Index within the heap array of least frequent node in the Huffman tree */ #define PQREMOVE(tree, top) \ -{ \ - top = heap[SMALLEST]; \ - heap[SMALLEST] = heap[heap_len--]; \ +do { \ + top = G2.heap[SMALLEST]; \ + G2.heap[SMALLEST] = G2.heap[G2.heap_len--]; \ pqdownheap(tree, SMALLEST); \ -} +} while (0) static void build_tree(tree_desc * desc) { @@ -1259,12 +1259,13 @@ static void build_tree(tree_desc * desc) * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. * heap[0] is not used. */ - heap_len = 0, heap_max = HEAP_SIZE; + G2.heap_len = 0; + G2.heap_max = HEAP_SIZE; for (n = 0; n < elems; n++) { if (tree[n].Freq != 0) { - heap[++heap_len] = max_code = n; - depth[n] = 0; + G2.heap[++G2.heap_len] = max_code = n; + G2.depth[n] = 0; } else { tree[n].Len = 0; } @@ -1275,14 +1276,14 @@ static void build_tree(tree_desc * desc) * possible code. So to avoid special checks later on we force at least * two codes of non zero frequency. */ - while (heap_len < 2) { - int new = heap[++heap_len] = (max_code < 2 ? ++max_code : 0); + while (G2.heap_len < 2) { + int new = G2.heap[++G2.heap_len] = (max_code < 2 ? ++max_code : 0); tree[new].Freq = 1; - depth[new] = 0; - opt_len--; + G2.depth[new] = 0; + G2.opt_len--; if (stree) - static_len -= stree[new].Len; + G2.static_len -= stree[new].Len; /* new is 0 or 1 so it does not have extra bits */ } desc->max_code = max_code; @@ -1290,7 +1291,7 @@ static void build_tree(tree_desc * desc) /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, * establish sub-heaps of increasing lengths: */ - for (n = heap_len / 2; n >= 1; n--) + for (n = G2.heap_len / 2; n >= 1; n--) pqdownheap(tree, n); /* Construct the Huffman tree by repeatedly combining the least two @@ -1298,28 +1299,28 @@ static void build_tree(tree_desc * desc) */ do { PQREMOVE(tree, n); /* n = node of least frequency */ - m = heap[SMALLEST]; /* m = node of next least frequency */ + m = G2.heap[SMALLEST]; /* m = node of next least frequency */ - heap[--heap_max] = n; /* keep the nodes sorted by frequency */ - heap[--heap_max] = m; + G2.heap[--G2.heap_max] = n; /* keep the nodes sorted by frequency */ + G2.heap[--G2.heap_max] = m; /* Create a new node father of n and m */ tree[node].Freq = tree[n].Freq + tree[m].Freq; - depth[node] = MAX(depth[n], depth[m]) + 1; + G2.depth[node] = MAX(G2.depth[n], G2.depth[m]) + 1; tree[n].Dad = tree[m].Dad = (ush) node; #ifdef DUMP_BL_TREE - if (tree == bl_tree) { + if (tree == G2.bl_tree) { bb_error_msg("\nnode %d(%d), sons %d(%d) %d(%d)", node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); } #endif /* and insert the new node in the heap */ - heap[SMALLEST] = node++; + G2.heap[SMALLEST] = node++; pqdownheap(tree, SMALLEST); - } while (heap_len >= 2); + } while (G2.heap_len >= 2); - heap[--heap_max] = heap[SMALLEST]; + G2.heap[--G2.heap_max] = G2.heap[SMALLEST]; /* At this point, the fields freq and dad are set. We can now * generate the bit lengths. @@ -1360,15 +1361,15 @@ static void scan_tree(ct_data * tree, int max_code) continue; if (count < min_count) { - bl_tree[curlen].Freq += count; + G2.bl_tree[curlen].Freq += count; } else if (curlen != 0) { if (curlen != prevlen) - bl_tree[curlen].Freq++; - bl_tree[REP_3_6].Freq++; + G2.bl_tree[curlen].Freq++; + G2.bl_tree[REP_3_6].Freq++; } else if (count <= 10) { - bl_tree[REPZ_3_10].Freq++; + G2.bl_tree[REPZ_3_10].Freq++; } else { - bl_tree[REPZ_11_138].Freq++; + G2.bl_tree[REPZ_11_138].Freq++; } count = 0; prevlen = curlen; @@ -1411,21 +1412,21 @@ static void send_tree(ct_data * tree, int max_code) continue; } else if (count < min_count) { do { - SEND_CODE(curlen, bl_tree); + SEND_CODE(curlen, G2.bl_tree); } while (--count); } else if (curlen != 0) { if (curlen != prevlen) { - SEND_CODE(curlen, bl_tree); + SEND_CODE(curlen, G2.bl_tree); count--; } Assert(count >= 3 && count <= 6, " 3_6?"); - SEND_CODE(REP_3_6, bl_tree); + SEND_CODE(REP_3_6, G2.bl_tree); send_bits(count - 3, 2); } else if (count <= 10) { - SEND_CODE(REPZ_3_10, bl_tree); + SEND_CODE(REPZ_3_10, G2.bl_tree); send_bits(count - 3, 3); } else { - SEND_CODE(REPZ_11_138, bl_tree); + SEND_CODE(REPZ_11_138, G2.bl_tree); send_bits(count - 11, 7); } count = 0; @@ -1453,11 +1454,11 @@ static int build_bl_tree(void) int max_blindex; /* index of last bit length code of non zero freq */ /* Determine the bit length frequencies for literal and distance trees */ - scan_tree((ct_data *) dyn_ltree, l_desc.max_code); - scan_tree((ct_data *) dyn_dtree, d_desc.max_code); + scan_tree(G2.dyn_ltree, G2.l_desc.max_code); + scan_tree(G2.dyn_dtree, G2.d_desc.max_code); /* Build the bit length tree: */ - build_tree((tree_desc *) &bl_desc); + build_tree(&G2.bl_desc); /* opt_len now includes the length of the tree representations, except * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. */ @@ -1467,12 +1468,12 @@ static int build_bl_tree(void) * 3 but the actual value used is 4.) */ for (max_blindex = BL_CODES - 1; max_blindex >= 3; max_blindex--) { - if (bl_tree[bl_order[max_blindex]].Len != 0) + if (G2.bl_tree[bl_order[max_blindex]].Len != 0) break; } /* Update opt_len to include the bit length tree and counts */ - opt_len += 3 * (max_blindex + 1) + 5 + 5 + 4; - Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", opt_len, static_len)); + G2.opt_len += 3 * (max_blindex + 1) + 5 + 5 + 4; + Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", G2.opt_len, G2.static_len)); return max_blindex; } @@ -1496,41 +1497,41 @@ static void send_all_trees(int lcodes, int dcodes, int blcodes) send_bits(blcodes - 4, 4); /* not -3 as stated in appnote.txt */ for (rank = 0; rank < blcodes; rank++) { Tracev((stderr, "\nbl code %2d ", bl_order[rank])); - send_bits(bl_tree[bl_order[rank]].Len, 3); + send_bits(G2.bl_tree[bl_order[rank]].Len, 3); } - Tracev((stderr, "\nbl tree: sent %ld", bits_sent)); + Tracev((stderr, "\nbl tree: sent %ld", G1.bits_sent)); - send_tree((ct_data *) dyn_ltree, lcodes - 1); /* send the literal tree */ - Tracev((stderr, "\nlit tree: sent %ld", bits_sent)); + send_tree((ct_data *) G2.dyn_ltree, lcodes - 1); /* send the literal tree */ + Tracev((stderr, "\nlit tree: sent %ld", G1.bits_sent)); - send_tree((ct_data *) dyn_dtree, dcodes - 1); /* send the distance tree */ - Tracev((stderr, "\ndist tree: sent %ld", bits_sent)); + send_tree((ct_data *) G2.dyn_dtree, dcodes - 1); /* send the distance tree */ + Tracev((stderr, "\ndist tree: sent %ld", G1.bits_sent)); } -/* =========================================================================== - * Set the file type to ASCII or BINARY, using a crude approximation: - * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise. - * IN assertion: the fields freq of dyn_ltree are set and the total of all - * frequencies does not exceed 64K (to fit in an int on 16 bit machines). - */ -static void set_file_type(void) -{ - int n = 0; - unsigned ascii_freq = 0; - unsigned bin_freq = 0; - - while (n < 7) - bin_freq += dyn_ltree[n++].Freq; - while (n < 128) - ascii_freq += dyn_ltree[n++].Freq; - while (n < LITERALS) - bin_freq += dyn_ltree[n++].Freq; - *file_type = (bin_freq > (ascii_freq >> 2)) ? BINARY : ASCII; - if (*file_type == BINARY && translate_eol) { - bb_error_msg("-l used on binary file"); - } -} +/////* =========================================================================== +//// * Set the file type to ASCII or BINARY, using a crude approximation: +//// * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise. +//// * IN assertion: the fields freq of dyn_ltree are set and the total of all +//// * frequencies does not exceed 64K (to fit in an int on 16 bit machines). +//// */ +////static void set_file_type(void) +////{ +//// int n = 0; +//// unsigned ascii_freq = 0; +//// unsigned bin_freq = 0; +//// +//// while (n < 7) +//// bin_freq += G2.dyn_ltree[n++].Freq; +//// while (n < 128) +//// ascii_freq += G2.dyn_ltree[n++].Freq; +//// while (n < LITERALS) +//// bin_freq += G2.dyn_ltree[n++].Freq; +//// *G2.file_type = (bin_freq > (ascii_freq >> 2)) ? BINARY : ASCII; +//// if (*G2.file_type == BINARY && translate_eol) { +//// bb_error_msg("-l used on binary file"); +//// } +////} /* =========================================================================== @@ -1539,10 +1540,10 @@ static void set_file_type(void) */ static int ct_tally(int dist, int lc) { - l_buf[last_lit++] = lc; + G1.l_buf[G2.last_lit++] = lc; if (dist == 0) { /* lc is the unmatched char */ - dyn_ltree[lc].Freq++; + G2.dyn_ltree[lc].Freq++; } else { /* Here, lc is the match length - MIN_MATCH */ dist--; /* dist = match distance - 1 */ @@ -1551,38 +1552,39 @@ static int ct_tally(int dist, int lc) && (ush) D_CODE(dist) < (ush) D_CODES, "ct_tally: bad match" ); - dyn_ltree[length_code[lc] + LITERALS + 1].Freq++; - dyn_dtree[D_CODE(dist)].Freq++; + G2.dyn_ltree[G2.length_code[lc] + LITERALS + 1].Freq++; + G2.dyn_dtree[D_CODE(dist)].Freq++; - d_buf[last_dist++] = dist; - flags |= flag_bit; + G1.d_buf[G2.last_dist++] = dist; + G2.flags |= G2.flag_bit; } - flag_bit <<= 1; + G2.flag_bit <<= 1; /* Output the flags if they fill a byte: */ - if ((last_lit & 7) == 0) { - flag_buf[last_flags++] = flags; - flags = 0, flag_bit = 1; + if ((G2.last_lit & 7) == 0) { + G2.flag_buf[G2.last_flags++] = G2.flags; + G2.flags = 0; + G2.flag_bit = 1; } /* Try to guess if it is profitable to stop the current block here */ - if ((last_lit & 0xfff) == 0) { + if ((G2.last_lit & 0xfff) == 0) { /* Compute an upper bound for the compressed length */ - ulg out_length = last_lit * 8L; - ulg in_length = (ulg) strstart - block_start; + ulg out_length = G2.last_lit * 8L; + ulg in_length = (ulg) G1.strstart - G1.block_start; int dcode; for (dcode = 0; dcode < D_CODES; dcode++) { - out_length += dyn_dtree[dcode].Freq * (5L + extra_dbits[dcode]); + out_length += G2.dyn_dtree[dcode].Freq * (5L + extra_dbits[dcode]); } out_length >>= 3; Trace((stderr, "\nlast_lit %u, last_dist %u, in %ld, out ~%ld(%ld%%) ", - last_lit, last_dist, in_length, out_length, + G2.last_lit, G2.last_dist, in_length, out_length, 100L - out_length * 100L / in_length)); - if (last_dist < last_lit / 2 && out_length < in_length / 2) + if (G2.last_dist < G2.last_lit / 2 && out_length < in_length / 2) return 1; } - return (last_lit == LIT_BUFSIZE - 1 || last_dist == DIST_BUFSIZE); + return (G2.last_lit == LIT_BUFSIZE - 1 || G2.last_dist == DIST_BUFSIZE); /* We avoid equality with LIT_BUFSIZE because of wraparound at 64K * on 16 bit machines and because stored blocks are restricted to * 64K-1 bytes. @@ -1603,23 +1605,23 @@ static void compress_block(ct_data * ltree, ct_data * dtree) unsigned code; /* the code to send */ int extra; /* number of extra bits to send */ - if (last_lit != 0) do { + if (G2.last_lit != 0) do { if ((lx & 7) == 0) - flag = flag_buf[fx++]; - lc = l_buf[lx++]; + flag = G2.flag_buf[fx++]; + lc = G1.l_buf[lx++]; if ((flag & 1) == 0) { SEND_CODE(lc, ltree); /* send a literal byte */ Tracecv(isgraph(lc), (stderr, " '%c' ", lc)); } else { /* Here, lc is the match length - MIN_MATCH */ - code = length_code[lc]; + code = G2.length_code[lc]; SEND_CODE(code + LITERALS + 1, ltree); /* send the length code */ extra = extra_lbits[code]; if (extra != 0) { - lc -= base_length[code]; + lc -= G2.base_length[code]; send_bits(lc, extra); /* send the extra length bits */ } - dist = d_buf[dx++]; + dist = G1.d_buf[dx++]; /* Here, dist is the match distance - 1 */ code = D_CODE(dist); Assert(code < D_CODES, "bad d_code"); @@ -1627,12 +1629,12 @@ static void compress_block(ct_data * ltree, ct_data * dtree) SEND_CODE(code, dtree); /* send the distance code */ extra = extra_dbits[code]; if (extra != 0) { - dist -= base_dist[code]; + dist -= G2.base_dist[code]; send_bits(dist, extra); /* send the extra distance bits */ } } /* literal or match pair ? */ flag >>= 1; - } while (lx < last_lit); + } while (lx < G2.last_lit); SEND_CODE(END_BLOCK, ltree); } @@ -1648,18 +1650,18 @@ static ulg flush_block(char *buf, ulg stored_len, int eof) ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ int max_blindex; /* index of last bit length code of non zero freq */ - flag_buf[last_flags] = flags; /* Save the flags for the last 8 items */ + G2.flag_buf[G2.last_flags] = G2.flags; /* Save the flags for the last 8 items */ - /* Check if the file is ascii or binary */ - if (*file_type == (ush) UNKNOWN) - set_file_type(); +//// /* Check if the file is ascii or binary */ +//// if (*G2.file_type == (ush) UNKNOWN) +//// set_file_type(); /* Construct the literal and distance trees */ - build_tree((tree_desc *) &l_desc); - Tracev((stderr, "\nlit data: dyn %ld, stat %ld", opt_len, static_len)); + build_tree(&G2.l_desc); + Tracev((stderr, "\nlit data: dyn %ld, stat %ld", G2.opt_len, G2.static_len)); - build_tree((tree_desc *) &d_desc); - Tracev((stderr, "\ndist data: dyn %ld, stat %ld", opt_len, static_len)); + build_tree(&G2.d_desc); + Tracev((stderr, "\ndist data: dyn %ld, stat %ld", G2.opt_len, G2.static_len)); /* At this point, opt_len and static_len are the total bit lengths of * the compressed block data, excluding the tree representations. */ @@ -1670,13 +1672,13 @@ static ulg flush_block(char *buf, ulg stored_len, int eof) max_blindex = build_bl_tree(); /* Determine the best encoding. Compute first the block length in bytes */ - opt_lenb = (opt_len + 3 + 7) >> 3; - static_lenb = (static_len + 3 + 7) >> 3; + opt_lenb = (G2.opt_len + 3 + 7) >> 3; + static_lenb = (G2.static_len + 3 + 7) >> 3; Trace((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u dist %u ", - opt_lenb, opt_len, static_lenb, static_len, stored_len, - last_lit, last_dist)); + opt_lenb, G2.opt_len, static_lenb, G2.static_len, stored_len, + G2.last_lit, G2.last_dist)); if (static_lenb <= opt_lenb) opt_lenb = static_lenb; @@ -1685,14 +1687,14 @@ static ulg flush_block(char *buf, ulg stored_len, int eof) * and if the zip file can be seeked (to rewrite the local header), * the whole file is transformed into a stored file: */ - if (stored_len <= opt_lenb && eof && compressed_len == 0L && seekable()) { + if (stored_len <= opt_lenb && eof && G2.compressed_len == 0L && seekable()) { /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */ if (buf == NULL) bb_error_msg("block vanished"); copy_block(buf, (unsigned) stored_len, 0); /* without header */ - compressed_len = stored_len << 3; - *file_method = STORED; + G2.compressed_len = stored_len << 3; +//// *file_method = STORED; } else if (stored_len + 4 <= opt_lenb && buf != NULL) { /* 4: two words for the lengths */ @@ -1703,33 +1705,33 @@ static ulg flush_block(char *buf, ulg stored_len, int eof) * transform a block into a stored block. */ send_bits((STORED_BLOCK << 1) + eof, 3); /* send block type */ - compressed_len = (compressed_len + 3 + 7) & ~7L; - compressed_len += (stored_len + 4) << 3; + G2.compressed_len = (G2.compressed_len + 3 + 7) & ~7L; + G2.compressed_len += (stored_len + 4) << 3; copy_block(buf, (unsigned) stored_len, 1); /* with header */ } else if (static_lenb == opt_lenb) { send_bits((STATIC_TREES << 1) + eof, 3); - compress_block((ct_data *) static_ltree, (ct_data *) static_dtree); - compressed_len += 3 + static_len; + compress_block((ct_data *) G2.static_ltree, (ct_data *) G2.static_dtree); + G2.compressed_len += 3 + G2.static_len; } else { send_bits((DYN_TREES << 1) + eof, 3); - send_all_trees(l_desc.max_code + 1, d_desc.max_code + 1, + send_all_trees(G2.l_desc.max_code + 1, G2.d_desc.max_code + 1, max_blindex + 1); - compress_block((ct_data *) dyn_ltree, (ct_data *) dyn_dtree); - compressed_len += 3 + opt_len; + compress_block((ct_data *) G2.dyn_ltree, (ct_data *) G2.dyn_dtree); + G2.compressed_len += 3 + G2.opt_len; } - Assert(compressed_len == bits_sent, "bad compressed size"); + Assert(G2.compressed_len == G1.bits_sent, "bad compressed size"); init_block(); if (eof) { bi_windup(); - compressed_len += 7; /* align on byte boundary */ + G2.compressed_len += 7; /* align on byte boundary */ } - Tracev((stderr, "\ncomprlen %lu(%lu) ", compressed_len >> 3, - compressed_len - 7 * eof)); + Tracev((stderr, "\ncomprlen %lu(%lu) ", G2.compressed_len >> 3, + G2.compressed_len - 7 * eof)); - return compressed_len >> 3; + return G2.compressed_len >> 3; } @@ -1756,10 +1758,10 @@ static ulg flush_block(char *buf, ulg stored_len, int eof) * IN assertion: strstart is set to the end of the current match. */ #define FLUSH_BLOCK(eof) \ flush_block( \ - block_start >= 0L \ - ? (char*)&window[(unsigned)block_start] \ + G1.block_start >= 0L \ + ? (char*)&G1.window[(unsigned)G1.block_start] \ : (char*)NULL, \ - (ulg)strstart - block_start, \ + (ulg)G1.strstart - G1.block_start, \ (eof) \ ) @@ -1770,11 +1772,11 @@ static ulg flush_block(char *buf, ulg stored_len, int eof) * input characters and the first MIN_MATCH bytes of s are valid * (except for the last MIN_MATCH-1 bytes of the input file). */ #define INSERT_STRING(s, match_head) \ -{ \ - UPDATE_HASH(ins_h, window[(s) + MIN_MATCH-1]); \ - prev[(s) & WMASK] = match_head = head[ins_h]; \ - head[ins_h] = (s); \ -} +do { \ + UPDATE_HASH(G1.ins_h, G1.window[(s) + MIN_MATCH-1]); \ + G1.prev[(s) & WMASK] = match_head = head[G1.ins_h]; \ + head[G1.ins_h] = (s); \ +} while (0) static ulg deflate(void) { @@ -1785,19 +1787,20 @@ static ulg deflate(void) unsigned match_length = MIN_MATCH - 1; /* length of best match */ /* Process the input block. */ - while (lookahead != 0) { + while (G1.lookahead != 0) { /* Insert the string window[strstart .. strstart+2] in the * dictionary, and set hash_head to the head of the hash chain: */ - INSERT_STRING(strstart, hash_head); + INSERT_STRING(G1.strstart, hash_head); /* Find the longest match, discarding those <= prev_length. */ - prev_length = match_length, prev_match = match_start; + G1.prev_length = match_length; + prev_match = G1.match_start; match_length = MIN_MATCH - 1; - if (hash_head != 0 && prev_length < max_lazy_match - && strstart - hash_head <= MAX_DIST + if (hash_head != 0 && G1.prev_length < max_lazy_match + && G1.strstart - hash_head <= MAX_DIST ) { /* To simplify the code, we prevent matches with the string * of window index 0 (in particular we have to avoid a match @@ -1805,12 +1808,12 @@ static ulg deflate(void) */ match_length = longest_match(hash_head); /* longest_match() sets match_start */ - if (match_length > lookahead) - match_length = lookahead; + if (match_length > G1.lookahead) + match_length = G1.lookahead; /* Ignore a length 3 match if it is too distant: */ - if (match_length == MIN_MATCH && strstart - match_start > TOO_FAR) { - /* If prev_match is also MIN_MATCH, match_start is garbage + if (match_length == MIN_MATCH && G1.strstart - G1.match_start > TOO_FAR) { + /* If prev_match is also MIN_MATCH, G1.match_start is garbage * but we will ignore the current match anyway. */ match_length--; @@ -1819,63 +1822,63 @@ static ulg deflate(void) /* If there was a match at the previous step and the current * match is not better, output the previous match: */ - if (prev_length >= MIN_MATCH && match_length <= prev_length) { - check_match(strstart - 1, prev_match, prev_length); - flush = ct_tally(strstart - 1 - prev_match, prev_length - MIN_MATCH); + if (G1.prev_length >= MIN_MATCH && match_length <= G1.prev_length) { + check_match(G1.strstart - 1, prev_match, G1.prev_length); + flush = ct_tally(G1.strstart - 1 - prev_match, G1.prev_length - MIN_MATCH); /* Insert in hash table all strings up to the end of the match. * strstart-1 and strstart are already inserted. */ - lookahead -= prev_length - 1; - prev_length -= 2; + G1.lookahead -= G1.prev_length - 1; + G1.prev_length -= 2; do { - strstart++; - INSERT_STRING(strstart, hash_head); + G1.strstart++; + INSERT_STRING(G1.strstart, hash_head); /* strstart never exceeds WSIZE-MAX_MATCH, so there are * always MIN_MATCH bytes ahead. If lookahead < MIN_MATCH * these bytes are garbage, but it does not matter since the * next lookahead bytes will always be emitted as literals. */ - } while (--prev_length != 0); + } while (--G1.prev_length != 0); match_available = 0; match_length = MIN_MATCH - 1; - strstart++; + G1.strstart++; if (flush) { FLUSH_BLOCK(0); - block_start = strstart; + G1.block_start = G1.strstart; } } else if (match_available) { /* If there was no match at the previous position, output a * single literal. If there was a match but the current match * is longer, truncate the previous match to a single literal. */ - Tracevv((stderr, "%c", window[strstart - 1])); - if (ct_tally(0, window[strstart - 1])) { + Tracevv((stderr, "%c", G1.window[G1.strstart - 1])); + if (ct_tally(0, G1.window[G1.strstart - 1])) { FLUSH_BLOCK(0); - block_start = strstart; + G1.block_start = G1.strstart; } - strstart++; - lookahead--; + G1.strstart++; + G1.lookahead--; } else { /* There is no previous match to compare with, wait for * the next step to decide. */ match_available = 1; - strstart++; - lookahead--; + G1.strstart++; + G1.lookahead--; } - Assert(strstart <= isize && lookahead <= isize, "a bit too far"); + Assert(G1.strstart <= G1.isize && lookahead <= G1.isize, "a bit too far"); /* Make sure that we always have enough lookahead, except * at the end of the input file. We need MAX_MATCH bytes * for the next match, plus MIN_MATCH bytes to insert the * string following the next match. */ - while (lookahead < MIN_LOOKAHEAD && !eofile) + while (G1.lookahead < MIN_LOOKAHEAD && !G1.eofile) fill_window(); } if (match_available) - ct_tally(0, window[strstart - 1]); + ct_tally(0, G1.window[G1.strstart - 1]); return FLUSH_BLOCK(1); /* eof */ } @@ -1884,13 +1887,12 @@ static ulg deflate(void) /* =========================================================================== * Initialize the bit string routines. */ -static void bi_init(void) //// int zipfile) +static void bi_init(void) { -//// zfile = zipfile; - bi_buf = 0; - bi_valid = 0; + G1.bi_buf = 0; + G1.bi_valid = 0; #ifdef DEBUG - bits_sent = 0L; + G1.bits_sent = 0L; #endif } @@ -1910,27 +1912,27 @@ static void lm_init(ush * flagsp) *flagsp |= 2; /* FAST 4, SLOW 2 */ /* ??? reduce max_chain_length for binary files */ - strstart = 0; - block_start = 0L; + G1.strstart = 0; + G1.block_start = 0L; - lookahead = file_read(window, + G1.lookahead = file_read(G1.window, sizeof(int) <= 2 ? (unsigned) WSIZE : 2 * WSIZE); - if (lookahead == 0 || lookahead == (unsigned) -1) { - eofile = 1; - lookahead = 0; + if (G1.lookahead == 0 || G1.lookahead == (unsigned) -1) { + G1.eofile = 1; + G1.lookahead = 0; return; } - eofile = 0; + G1.eofile = 0; /* Make sure that we always have enough lookahead. This is important * if input comes from a device such as a tty. */ - while (lookahead < MIN_LOOKAHEAD && !eofile) + while (G1.lookahead < MIN_LOOKAHEAD && !G1.eofile) fill_window(); - ins_h = 0; + G1.ins_h = 0; for (j = 0; j < MIN_MATCH - 1; j++) - UPDATE_HASH(ins_h, window[j]); + UPDATE_HASH(G1.ins_h, G1.window[j]); /* If lookahead < MIN_MATCH, ins_h is garbage, but this is * not important since only literal bytes will be emitted. */ @@ -1943,28 +1945,28 @@ static void lm_init(ush * flagsp) * (DEFLATE/STORE). * One callsite in zip() */ -static void ct_init(ush * attr, int *methodp) +static void ct_init(void) ////ush * attr, int *methodp) { int n; /* iterates over tree elements */ int length; /* length value */ int code; /* code value */ int dist; /* distance index */ - file_type = attr; - file_method = methodp; - compressed_len = 0L; +//// file_type = attr; +//// file_method = methodp; + G2.compressed_len = 0L; #ifdef NOT_NEEDED - if (static_dtree[0].Len != 0) + if (G2.static_dtree[0].Len != 0) return; /* ct_init already called */ #endif /* Initialize the mapping length (0..255) -> length code (0..28) */ length = 0; for (code = 0; code < LENGTH_CODES - 1; code++) { - base_length[code] = length; + G2.base_length[code] = length; for (n = 0; n < (1 << extra_lbits[code]); n++) { - length_code[length++] = code; + G2.length_code[length++] = code; } } Assert(length == 256, "ct_init: length != 256"); @@ -1972,22 +1974,22 @@ static void ct_init(ush * attr, int *methodp) * in two different ways: code 284 + 5 bits or code 285, so we * overwrite length_code[255] to use the best encoding: */ - length_code[length - 1] = code; + G2.length_code[length - 1] = code; /* Initialize the mapping dist (0..32K) -> dist code (0..29) */ dist = 0; for (code = 0; code < 16; code++) { - base_dist[code] = dist; + G2.base_dist[code] = dist; for (n = 0; n < (1 << extra_dbits[code]); n++) { - dist_code[dist++] = code; + G2.dist_code[dist++] = code; } } Assert(dist == 256, "ct_init: dist != 256"); dist >>= 7; /* from now on, all distances are divided by 128 */ for (; code < D_CODES; code++) { - base_dist[code] = dist << 7; + G2.base_dist[code] = dist << 7; for (n = 0; n < (1 << (extra_dbits[code] - 7)); n++) { - dist_code[256 + dist++] = code; + G2.dist_code[256 + dist++] = code; } } Assert(dist == 256, "ct_init: 256+dist != 512"); @@ -1995,35 +1997,35 @@ static void ct_init(ush * attr, int *methodp) /* Construct the codes of the static literal tree */ /* already zeroed - it's in bss for (n = 0; n <= MAX_BITS; n++) - bl_count[n] = 0; */ + G2.bl_count[n] = 0; */ n = 0; while (n <= 143) { - static_ltree[n++].Len = 8; - bl_count[8]++; + G2.static_ltree[n++].Len = 8; + G2.bl_count[8]++; } while (n <= 255) { - static_ltree[n++].Len = 9; - bl_count[9]++; + G2.static_ltree[n++].Len = 9; + G2.bl_count[9]++; } while (n <= 279) { - static_ltree[n++].Len = 7; - bl_count[7]++; + G2.static_ltree[n++].Len = 7; + G2.bl_count[7]++; } while (n <= 287) { - static_ltree[n++].Len = 8; - bl_count[8]++; + G2.static_ltree[n++].Len = 8; + G2.bl_count[8]++; } /* Codes 286 and 287 do not exist, but we must include them in the * tree construction to get a canonical Huffman tree (longest code * all ones) */ - gen_codes((ct_data *) static_ltree, L_CODES + 1); + gen_codes((ct_data *) G2.static_ltree, L_CODES + 1); /* The static distance tree is trivial: */ for (n = 0; n < D_CODES; n++) { - static_dtree[n].Len = 5; - static_dtree[n].Code = bi_reverse(n, 5); + G2.static_dtree[n].Len = 5; + G2.static_dtree[n].Code = bi_reverse(n, 5); } /* Initialize the first block of the first file: */ @@ -2039,32 +2041,33 @@ static void ct_init(ush * attr, int *methodp) /* put_header_byte is used for the compressed output * - for the initial 4 bytes that can't overflow the buffer. */ -#define put_header_byte(c) outbuf[outcnt++] = (c) +#define put_header_byte(c) G1.outbuf[G1.outcnt++] = (c) static void zip(int in, int out) { uch my_flags = 0; /* general purpose bit flags */ - ush attr = 0; /* ascii/binary flag */ +//// ush attr = 0; /* ascii/binary flag */ ush deflate_flags = 0; /* pkzip -es, -en or -ex equivalent */ +//// int method = DEFLATED; /* compression method */ - ifd = in; - ofd = out; - outcnt = 0; + G1.ifd = in; + G1.ofd = out; + G1.outcnt = 0; /* Write the header to the gzip file. See algorithm.doc for the format */ - method = DEFLATED; put_header_byte(0x1f); /* magic header for gzip files, 1F 8B */ put_header_byte(0x8b); - put_header_byte(DEFLATED); /* compression method */ + ////put_header_byte(DEFLATED); /* compression method */ + put_header_byte(8); /* compression method */ put_header_byte(my_flags); /* general flags */ - put_32bit(time_stamp); + put_32bit(G1.time_stamp); /* Write deflated file to zip file */ - crc = ~0; + G1.crc = ~0; - bi_init(); //// (out); - ct_init(&attr, &method); + bi_init(); + ct_init(); //// &attr, &method); lm_init(&deflate_flags); put_8bit(deflate_flags); /* extra flags */ @@ -2073,8 +2076,8 @@ static void zip(int in, int out) deflate(); /* Write the crc and uncompressed size */ - put_32bit(~crc); - put_32bit(isize); + put_32bit(~G1.crc); + put_32bit(G1.isize); flush_outbuf(); } @@ -2123,8 +2126,8 @@ int gzip_main(int argc, char **argv) } #endif - foreground = signal(SIGINT, SIG_IGN) != SIG_IGN; - if (foreground) { + /* Comment?? */ + if (signal(SIGINT, SIG_IGN) != SIG_IGN) { signal(SIGINT, abort_gzip); } #ifdef SIGTERM @@ -2138,22 +2141,36 @@ int gzip_main(int argc, char **argv) } #endif + G2ptr = xzalloc(sizeof(*G2ptr)); + G2.l_desc = (tree_desc) { + G2.dyn_ltree, G2.static_ltree, extra_lbits, + LITERALS + 1, L_CODES, MAX_BITS, 0 + }; + G2.d_desc = (tree_desc) { + G2.dyn_dtree, G2.static_dtree, extra_dbits, + 0, D_CODES, MAX_BITS, 0 + }; + G2.bl_desc = (tree_desc) { + G2.bl_tree, NULL, extra_blbits, + 0, BL_CODES, MAX_BL_BITS, 0 + }; + /* Allocate all global buffers (for DYN_ALLOC option) */ - ALLOC(uch, l_buf, INBUFSIZ); - ALLOC(uch, outbuf, OUTBUFSIZ); - ALLOC(ush, d_buf, DIST_BUFSIZE); - ALLOC(uch, window, 2L * WSIZE); - ALLOC(ush, prev, 1L << BITS); + ALLOC(uch, G1.l_buf, INBUFSIZ); + ALLOC(uch, G1.outbuf, OUTBUFSIZ); + ALLOC(ush, G1.d_buf, DIST_BUFSIZE); + ALLOC(uch, G1.window, 2L * WSIZE); + ALLOC(ush, G1.prev, 1L << BITS); /* Initialise the CRC32 table */ - crc_32_tab = crc32_filltable(0); + G1.crc_32_tab = crc32_filltable(0); clear_bufs(); if (optind == argc) { - time_stamp = 0; + G1.time_stamp = 0; zip(STDIN_FILENO, STDOUT_FILENO); - return exit_code; + return 0; //## G1.exit_code; } for (i = optind; i < argc; i++) { @@ -2161,14 +2178,14 @@ int gzip_main(int argc, char **argv) clear_bufs(); if (LONE_DASH(argv[i])) { - time_stamp = 0; + G1.time_stamp = 0; inFileNum = STDIN_FILENO; outFileNum = STDOUT_FILENO; } else { inFileNum = xopen(argv[i], O_RDONLY); if (fstat(inFileNum, &statBuf) < 0) bb_perror_msg_and_die("%s", argv[i]); - time_stamp = statBuf.st_ctime; + G1.time_stamp = statBuf.st_ctime; if (!(opt & OPT_tostdout)) { path = xasprintf("%s.gz", argv[i]); @@ -2219,5 +2236,5 @@ int gzip_main(int argc, char **argv) free(path); } - return exit_code; + return 0; //##G1.exit_code; } |