aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/applets.h3
-rw-r--r--include/busybox.h1
-rw-r--r--include/usage.h745
3 files changed, 379 insertions, 370 deletions
diff --git a/include/applets.h b/include/applets.h
index d3e38d813..d4a5564b1 100644
--- a/include/applets.h
+++ b/include/applets.h
@@ -15,7 +15,6 @@
#undef APPLET_ODDNAME
#undef APPLET_NOUSAGE
-
#if defined(PROTOTYPES)
# define APPLET(a,b,c) extern int a##_main(int argc, char **argv);
# define APPLET_NOUSAGE(a,b,c,d) extern int b##_main(int argc, char **argv);
@@ -64,8 +63,6 @@ USE_BASENAME(APPLET(basename, _BB_DIR_USR_BIN, _BB_SUID_NEVER))
USE_BBCONFIG(APPLET(bbconfig, _BB_DIR_BIN, _BB_SUID_NEVER))
//USE_BBSH(APPLET(bbsh, _BB_DIR_BIN, _BB_SUID_NEVER))
USE_BUNZIP2(APPLET(bunzip2, _BB_DIR_USR_BIN, _BB_SUID_NEVER))
-/* Always enabled. */
-APPLET_NOUSAGE(busybox, busybox, _BB_DIR_BIN, _BB_SUID_MAYBE)
USE_BUNZIP2(APPLET_ODDNAME(bzcat, bunzip2, _BB_DIR_USR_BIN, _BB_SUID_NEVER, bzcat))
USE_CAL(APPLET(cal, _BB_DIR_USR_BIN, _BB_SUID_NEVER))
USE_CAT(APPLET(cat, _BB_DIR_BIN, _BB_SUID_NEVER))
diff --git a/include/busybox.h b/include/busybox.h
index a7a0f4915..a1139b5aa 100644
--- a/include/busybox.h
+++ b/include/busybox.h
@@ -32,6 +32,7 @@ struct BB_applet {
};
/* From busybox.c and applet.c */
+extern int busybox_main(int argc, char **argv);
extern const struct BB_applet applets[];
extern const unsigned short NUM_APPLETS;
diff --git a/include/usage.h b/include/usage.h
index 701b421a8..a9718d72d 100644
--- a/include/usage.h
+++ b/include/usage.h
@@ -14,15 +14,15 @@
#define addgroup_trivial_usage \
"[-g GID] group_name [user_name]"
#define addgroup_full_usage \
- "Adds a group to the system\n\n" \
- "Options:\n" \
+ "Adds a group to the system" \
+ "\n\nOptions:\n" \
" -g GID specify gid"
#define adduser_trivial_usage \
"[OPTIONS] user_name"
#define adduser_full_usage \
- "Adds a user to the system\n\n" \
- "Options:\n" \
+ "Adds a user to the system" \
+ "\n\nOptions:\n" \
" -h DIR Assign home directory DIR\n" \
" -g GECOS Assign gecos field GECOS\n" \
" -s SHELL Assign login shell SHELL\n" \
@@ -35,8 +35,8 @@
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
#define adjtimex_full_usage \
"Reads and optionally sets system timebase parameters.\n" \
- "See adjtimex(2).\n\n" \
- "Options:\n" \
+ "See adjtimex(2)." \
+ "\n\nOptions:\n" \
" -q quiet mode - do not print\n" \
" -o offset time offset, microseconds\n" \
" -f frequency frequency adjust, integer kernel units (65536 is 1ppm)\n" \
@@ -47,19 +47,19 @@
#define ar_trivial_usage \
"[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
#define ar_full_usage \
- "Extract or list FILES from an ar archive.\n\n" \
- "Options:\n" \
- " -o preserve original dates\n" \
- " -p extract to stdout\n" \
- " -t list\n" \
- " -x extract\n" \
- " -v verbosely list files processed"
+ "Extract or list FILES from an ar archive" \
+ "\n\nOptions:\n" \
+ " -o preserve original dates\n" \
+ " -p extract to stdout\n" \
+ " -t list\n" \
+ " -x extract\n" \
+ " -v verbosely list files processed"
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target"
#define arping_full_usage \
- "Ping hosts by ARP requests/replies.\n\n" \
- "Options:\n" \
+ "Ping hosts by ARP requests/replies" \
+ "\n\nOptions:\n" \
" -f Quit on first ARP reply\n" \
" -q Be quiet\n" \
" -b Keep broadcasting, don't go unicast\n" \
@@ -102,8 +102,8 @@
#define bunzip2_trivial_usage \
"[OPTION]... [FILE]"
#define bunzip2_full_usage \
- "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
- "Options:\n" \
+ "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
+ "\n\nOptions:\n" \
" -c Write output to standard output\n" \
" -f Force"
@@ -118,8 +118,8 @@
#define unlzma_trivial_usage \
"[OPTION]... [FILE]"
#define unlzma_full_usage \
- "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \
- "Options:\n" \
+ "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
+ "\n\nOptions:\n" \
" -c Write output to standard output\n" \
" -f Force"
@@ -131,16 +131,16 @@
#define cal_trivial_usage \
"[-jy] [[month] year]"
#define cal_full_usage \
- "Display a calendar.\n" \
- "\nOptions:\n" \
+ "Display a calendar" \
+ "\n\nOptions:\n" \
" -j Use julian dates\n" \
" -y Display the entire year"
#define cat_trivial_usage \
"[-u] [FILE]..."
#define cat_full_usage \
- "Concatenates FILE(s) and prints them to stdout.\n\n" \
- "Options:\n" \
+ "Concatenates FILE(s) and prints them to stdout" \
+ "\n\nOptions:\n" \
" -u ignored since unbuffered i/o is always used"
#define cat_example_usage \
"$ cat /proc/uptime\n" \
@@ -149,7 +149,8 @@
#define catv_trivial_usage \
"[-etv] [FILE]..."
#define catv_full_usage \
- "Display nonprinting characters as ^x or M-x.\n\n"\
+ "Display nonprinting characters as ^x or M-x" \
+ "\n\nOptions:\n" \
" -e End each line with $\n" \
" -t Show tabs as ^I\n" \
" -v Don't use ^x or M-x escapes."
@@ -173,15 +174,15 @@
" S write file contents synchronously\n" \
" t disable tail-merging of partial blocks with other files\n" \
" u allow file to be undeleted\n" \
- "Options:\n" \
+ " Options:\n" \
" -R recursively list subdirectories\n" \
" -v set the file's version/generation number"
#define chgrp_trivial_usage \
"[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..."
#define chgrp_full_usage \
- "Change the group membership of each FILE to GROUP.\n" \
- "\nOptions:\n" \
+ "Change the group membership of each FILE to GROUP" \
+ "\n\nOptions:\n" \
" -R Changes files and directories recursively\n" \
" -h Do not dereference symbolic links" \
USE_DESKTOP( \
@@ -200,9 +201,9 @@
"[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
#define chmod_full_usage \
"Each MODE is one or more of the letters ugoa, one of the\n" \
- "symbols +-= and one or more of the letters rwxst.\n\n" \
- "Options:\n" \
- " -R Changes files and directories recursively" \
+ "symbols +-= and one or more of the letters rwxst" \
+ "\n\nOptions:" \
+ "\n -R Changes files and directories recursively" \
USE_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
@@ -221,10 +222,10 @@
#define chown_trivial_usage \
"[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
- "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \
- "\nOptions:\n" \
- " -R Changes files and directories recursively\n" \
- " -h Do not dereference symbolic links" \
+ "Change the owner and/or group of each FILE to OWNER and/or GROUP" \
+ "\n\nOptions:" \
+ "\n -R Changes files and directories recursively" \
+ "\n -h Do not dereference symbolic links" \
USE_DESKTOP( \
"\n -c List changed files" \
"\n -v List all files" \
@@ -245,7 +246,8 @@
"[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
"[-p processes] [-f bytes] [-c bytes] prog args"
#define chpst_full_usage \
- "Change the process state and run specified program.\n\n" \
+ "Change the process state and run specified program" \
+ "\n\nOptions:\n" \
" -u user[:grp] set uid and gid\n" \
" -U user[:grp] set environment variables UID and GID\n" \
" -e dir set environment variables as specified by files\n" \
@@ -334,8 +336,8 @@
#define cmp_trivial_usage \
"[-l] [-s] FILE1 [FILE2]"
#define cmp_full_usage \
- "Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \
- "Options:\n" \
+ "Compares FILE1 vs stdin if FILE2 is not specified" \
+ "\n\nOptions:\n" \
" -l Write the byte numbers (decimal) and values (octal)\n" \
" for all differing bytes\n" \
" -s quiet mode - do not print"
@@ -343,8 +345,8 @@
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
#define comm_full_usage \
- "Compares FILE1 to FILE2, or to stdin if = is specified.\n\n" \
- "Options:\n" \
+ "Compares FILE1 to FILE2, or to stdin if = is specified" \
+ "\n\nOptions:\n" \
" -1 Suppress lines unique to FILE1\n" \
" -2 Suppress lines unique to FILE2\n" \
" -3 Suppress lines common to both files"
@@ -414,8 +416,8 @@
#define cut_trivial_usage \
"[OPTION]... [FILE]..."
#define cut_full_usage \
- "Prints selected fields from each input FILE to standard output.\n\n" \
- "Options:\n" \
+ "Prints selected fields from each input FILE to standard output" \
+ "\n\nOptions:\n" \
" -b LIST Output only bytes from LIST\n" \
" -c LIST Output only characters from LIST\n" \
" -d CHAR Use CHAR instead of tab as the field delimiter\n" \
@@ -431,8 +433,8 @@
#define date_trivial_usage \
"[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
#define date_full_usage \
- "Displays the current time in the given FORMAT, or sets the system date.\n" \
- "\nOptions:\n" \
+ "Displays the current time in the given FORMAT, or sets the system date" \
+ "\n\nOptions:\n" \
" -R Outputs RFC-822 compliant date string\n" \
" -d STRING Displays time described by STRING, not 'now'\n" \
USE_FEATURE_DATE_ISOFMT( \
@@ -455,8 +457,8 @@
"This is a Tiny RPN calculator that understands the\n" \
"following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
"**, exp, and, or, not, eor.\n" \
- "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
- "\nOptions:\n" \
+ "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \
+ "\n\nOptions:\n" \
"p - Prints the value on the top of the stack, without altering the stack\n" \
"f - Prints the entire contents of the stack without altering anything\n" \
"o - Pops the value off the top of the stack and uses it to set the output radix\n" \
@@ -477,7 +479,8 @@
"[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
" [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
#define dd_full_usage \
- "Copy a file, converting and formatting according to options\n\n" \
+ "Copy a file with converting and formatting" \
+ "\n\nOptions:\n" \
" if=FILE read from FILE instead of stdin\n" \
" of=FILE write to FILE instead of stdout\n" \
" bs=N read and write N bytes at a time\n" \
@@ -519,8 +522,8 @@
"mntpnt [-v]" \
USE_DEVFSD_FG_NP("[-fg][-np]" )
#define devfsd_full_usage \
- "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
- "\nOptions:" \
+ "Optional daemon for managing devfs permissions and old device name symlinks" \
+ "\n\nOptions:" \
"\n mntpnt The mount point where devfs is mounted." \
"\n -v Print the protocol version numbers for devfsd." \
"\n and the kernel-side protocol version and exits." \
@@ -533,8 +536,8 @@
#define df_trivial_usage \
"[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]"
#define df_full_usage \
- "Print the filesystem space used and space available.\n\n" \
- "Options:\n" \
+ "Print the filesystem space used and space available" \
+ "\n\nOptions:\n" \
USE_FEATURE_HUMAN_READABLE( \
"\n -h print sizes in human readable format (e.g., 1K 243M 2G )\n" \
" -m print sizes in megabytes\n" \
@@ -564,8 +567,8 @@
"[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
#define diff_full_usage \
"Compare files line by line and output the differences between them.\n" \
- "This diff implementation only supports unified diffs.\n\n" \
- "Options:\n" \
+ "This diff implementation only supports unified diffs." \
+ "\n\nOptions:\n" \
" -a Treat all files as text\n" \
" -b Ignore changes in the amount of whitespace\n" \
" -d Try hard to find a smaller set of changes\n" \
@@ -594,8 +597,8 @@
#define dmesg_trivial_usage \
"[-c] [-n LEVEL] [-s SIZE]"
#define dmesg_full_usage \
- "Prints or controls the kernel ring buffer\n\n" \
- "Options:\n" \
+ "Prints or controls the kernel ring buffer" \
+ "\n\nOptions:\n" \
" -c Clears the ring buffer's contents after printing\n" \
" -n LEVEL Sets console logging level\n" \
" -s SIZE Use a buffer of size SIZE"
@@ -603,8 +606,8 @@
#define dnsd_trivial_usage \
"[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
#define dnsd_full_usage \
- "Small and static DNS server daemon\n\n" \
- "Options:\n" \
+ "Small and static DNS server daemon" \
+ "\n\nOptions:\n" \
" -c config filename\n" \
" -t TTL in seconds\n" \
" -p listening port\n" \
@@ -616,16 +619,16 @@
#define dos2unix_full_usage \
"Converts FILE from dos format to unix format. When no option\n" \
"is given, the input is converted to the opposite output format.\n" \
- "When no file is given, uses stdin for input and stdout for output.\n\n" \
- "Options:\n" \
+ "When no file is given, uses stdin for input and stdout for output." \
+ "\n\nOptions:\n" \
" -u output will be in UNIX format\n" \
" -d output will be in DOS format"
#define dpkg_trivial_usage \
"[-ilCPru] [-F option] package_name"
#define dpkg_full_usage \
- "dpkg is a utility to install, remove and manage Debian packages.\n\n" \
- "Options:\n" \
+ "Install, remove and manage Debian packages" \
+ "\n\nOptions:\n" \
" -i Install the package\n" \
" -l List of installed packages\n" \
" -C Configure an unpackaged package\n" \
@@ -637,8 +640,8 @@
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
#define dpkg_deb_full_usage \
- "Perform actions on Debian packages (.debs)\n\n" \
- "Options:\n" \
+ "Perform actions on Debian packages (.debs)" \
+ "\n\nOptions:\n" \
" -c List contents of filesystem tree\n" \
" -e Extract control files to [argument] directory\n" \
" -f Display control field name starting with [argument]\n" \
@@ -654,8 +657,8 @@
"Disk space is printed in units of " \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
- " bytes.\n\n" \
- "Options:\n" \
+ " bytes." \
+ "\n\nOptions:\n" \
" -a show sizes of files in addition to directories\n" \
" -H follow symbolic links that are FILE command line args\n" \
" -L follow all symbolic links encountered\n" \
@@ -693,8 +696,8 @@
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
- "Displays the DHCP leases granted by udhcpd.\n\n" \
- "Options:\n" \
+ "Display DHCP leases granted by udhcpd" \
+ "\n\nOptions:\n" \
" -f, --file=FILENAME Leases file to load\n" \
" -r, --remaining Interpret lease times as time remaining\n" \
" -a, --absolute Interpret lease times as expire time"
@@ -705,8 +708,8 @@
"[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
"[-E extended-options] device"
#define e2fsck_full_usage \
- "Check a Linux ext2/ext3 file system.\n\n" \
- "Options:\n" \
+ "Check ext2/ext3 file system" \
+ "\n\nOptions:\n" \
" -p Automatic repair (no questions)\n" \
" -n Make no changes to the filesystem\n" \
" -y Assume 'yes' to all questions\n" \
@@ -722,9 +725,9 @@
#define echo_trivial_usage \
USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]"
#define echo_full_usage \
- "Prints the specified ARGs to stdout\n\n" \
+ "Print the specified ARGs to stdout" \
USE_FEATURE_FANCY_ECHO( \
- "Options:\n" \
+ "\n\nOptions:\n" \
" -n suppress trailing newline\n" \
" -e interpret backslash-escaped characters (i.e., \\t=tab)\n" \
" -E disable interpretation of backslash-escaped characters" \
@@ -742,8 +745,8 @@
#define eject_trivial_usage \
"[-t] [-T] [DEVICE]"
#define eject_full_usage \
- "Eject specified DEVICE (or default /dev/cdrom).\n\n" \
- "Options:\n" \
+ "Eject specified DEVICE (or default /dev/cdrom)" \
+ "\n\nOptions:\n" \
" -t close tray\n" \
" -T open/close tray (toggle)"
@@ -753,9 +756,9 @@
#define env_trivial_usage \
"[-iu] [-] [name=value]... [command]"
#define env_full_usage \
- "Prints the current environment or runs a program after setting\n" \
- "up the specified environment.\n\n" \
- "Options:\n" \
+ "Print the current environment or runs a program after setting\n" \
+ "up the specified environment" \
+ "\n\nOptions:\n" \
" -, -i start with an empty environment\n" \
" -u remove variable from the environment"
@@ -764,8 +767,8 @@
#define ether_wake_full_usage \
"Send a magic packet to wake up sleeping machines.\n" \
"MAC must be a station address (00:11:22:33:44:55) or\n" \
- " a hostname with a known 'ethers' entry.\n\n" \
- "Options:\n" \
+ "a hostname with a known 'ethers' entry." \
+ "\n\nOptions:\n" \
" -b Send wake-up packet to the broadcast address\n" \
" -i iface Use interface ifname instead of the default \"eth0\"\n" \
" -p pass Append the four or six byte password PW to the packet"
@@ -806,7 +809,8 @@
#define fakeidentd_trivial_usage \
"[-b ip] [STRING]"
#define fakeidentd_full_usage \
- "Returns a set string to auth requests\n\n" \
+ "Returns a set string to auth requests" \
+ "\n\nOptions:\n" \
" -b Bind to ip address\n" \
" STRING The ident answer string (default is nobody)"
@@ -841,15 +845,15 @@
#define fdformat_trivial_usage \
"[-n] DEVICE"
#define fdformat_full_usage \
- "Low-level formats a floppy disk\n\n" \
- "Options:\n" \
+ "Low-level formats a floppy disk" \
+ "\n\nOptions:\n" \
" -n Don't verify after format"
#define fdisk_trivial_usage \
"[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
#define fdisk_full_usage \
- "Change partition table\n" \
- "Options:\n" \
+ "Change partition table" \
+ "\n\nOptions:\n" \
" -l List partition table(s)\n" \
" -u Give Start and End in sector (instead of cylinder) units\n" \
" -s PARTITION Give partition size(s) in blocks\n" \
@@ -903,8 +907,8 @@
"[-bs] [-w WIDTH] [FILE]"
#define fold_full_usage \
"Wrap input lines in each FILE (standard input by default), writing to\n" \
- "standard output.\n\n" \
- "Options:\n" \
+ "standard output" \
+ "\n\nOptions:\n" \
" -b count bytes rather than columns\n" \
" -s break at spaces\n" \
" -w use WIDTH columns instead of 80"
@@ -930,8 +934,8 @@
#define fsck_trivial_usage \
"[-ANPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]"
#define fsck_full_usage \
- "Check and repair filesystems.\n\n" \
- "Options:\n" \
+ "Check and repair filesystems" \
+ "\n\nOptions:\n" \
" -A Walk /etc/fstab and check all filesystems\n" \
" -N Don't execute, just show what would be done\n" \
" -P When using -A, check filesystems in parallel\n" \
@@ -944,8 +948,8 @@
#define fsck_minix_trivial_usage \
"[-larvsmf] /dev/name"
#define fsck_minix_full_usage \
- "Performs a consistency check for MINIX filesystems.\n\n" \
- "Options:\n" \
+ "Performs a consistency check for MINIX filesystems" \
+ "\n\nOptions:\n" \
" -l Lists all filenames\n" \
" -r Perform interactive repairs\n" \
" -a Perform automatic repairs\n" \
@@ -957,8 +961,8 @@
#define ftpget_trivial_usage \
"[options] remote-host local-file remote-file"
#define ftpget_full_usage \
- "Retrieve a remote file via FTP.\n\n" \
- "Options:\n" \
+ "Retrieve a remote file via FTP" \
+ "\n\nOptions:\n" \
" -c, --continue Continue a previous transfer\n" \
" -v, --verbose Verbose\n" \
" -u, --username Username to be used\n" \
@@ -968,8 +972,8 @@
#define ftpput_trivial_usage \
"[options] remote-host remote-file local-file"
#define ftpput_full_usage \
- "Store a local file on a remote machine via FTP.\n\n" \
- "Options:\n" \
+ "Store a local file on a remote machine via FTP" \
+ "\n\nOptions:\n" \
" -v, --verbose Verbose\n" \
" -u, --username Username to be used\n" \
" -p, --password Password to be used\n" \
@@ -1023,8 +1027,8 @@
#define getty_trivial_usage \
"[OPTIONS]... baud_rate,... line [termtype]"
#define getty_full_usage \
- "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \
- "Options:\n" \
+ "Open a tty, prompt for a login name, then invoke /bin/login" \
+ "\n\nOptions:\n" \
" -h Enable hardware (RTS/CTS) flow control\n" \
" -i Do not display /etc/issue before running login\n" \
" -L Local line, so do not do carrier detect\n" \
@@ -1043,8 +1047,8 @@
USE_FEATURE_GREP_CONTEXT("ABC") \
"] PATTERN [FILEs...]"
#define grep_full_usage \
- "Search for PATTERN in each FILE or standard input.\n\n" \
- "Options:\n" \
+ "Search for PATTERN in each FILE or standard input" \
+ "\n\nOptions:\n" \
" -H prefix output lines with filename where match was found\n" \
" -h suppress the prefixing filename on output\n" \
" -r recurse subdirectories\n" \
@@ -1078,8 +1082,8 @@
#define gunzip_trivial_usage \
"[OPTION]... FILE"
#define gunzip_full_usage \
- "Uncompress FILE (or standard input if FILE is '-').\n\n" \
- "Options:\n" \
+ "Uncompress FILE (or standard input if FILE is '-')" \
+ "\n\nOptions:\n" \
" -c Write output to standard output\n" \
" -f Force read when source is a terminal\n" \
" -t Test compressed file integrity"
@@ -1094,8 +1098,8 @@
"[OPTION]... [FILE]..."
#define gzip_full_usage \
"Compress FILE(s) with maximum compression.\n" \
- "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \
- "Options:\n" \
+ "When FILE is '-' or unspecified, reads standard input. Implies -c." \
+ "\n\nOptions:\n" \
" -c Write output to standard output instead of FILE.gz\n" \
" -d Decompress\n" \
" -f Force write when destination is a terminal"
@@ -1109,8 +1113,8 @@
#define halt_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define halt_full_usage \
- "Halt the system.\n" \
- "Options:\n" \
+ "Halt the system" \
+ "\n\nOptions:\n" \
" -d delay interval for halting\n" \
" -n no call to sync()\n" \
" -f force halt (don't go through init)"
@@ -1119,62 +1123,62 @@
"[options] [device] .."
#define hdparm_full_usage \
USE_FEATURE_HDPARM_GET_IDENTITY( \
- " If no device name is specified try to read from stdin.\n") \
- "\nOptions:\n" \
- " -a get/set fs readahead\n" \
- " -A set drive read-lookahead flag (0/1)\n" \
- " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
- " -B set Advanced Power Management setting (1-255)\n" \
- " -c get/set IDE 32-bit IO setting\n" \
- " -C check IDE power mode status\n" \
+ "If no device name is specified try to read from stdin.\n\n") \
+ "Options:\n" \
+ " -a get/set fs readahead\n" \
+ " -A set drive read-lookahead flag (0/1)\n" \
+ " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
+ " -B set Advanced Power Management setting (1-255)\n" \
+ " -c get/set IDE 32-bit IO setting\n" \
+ " -C check IDE power mode status\n" \
USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \
- " -d get/set using_dma flag\n") \
- " -D enable/disable drive defect-mgmt\n" \
- " -f flush buffer cache for device on exit\n" \
- " -g display drive geometry\n" \
- " -h display terse usage information\n" \
+ " -d get/set using_dma flag\n") \
+ " -D enable/disable drive defect-mgmt\n" \
+ " -f flush buffer cache for device on exit\n" \
+ " -g display drive geometry\n" \
+ " -h display terse usage information\n" \
USE_FEATURE_HDPARM_GET_IDENTITY( \
- " -i display drive identification\n") \
+ " -i display drive identification\n") \
USE_FEATURE_HDPARM_GET_IDENTITY( \
- " -I detailed/current information directly from drive\n") \
- " -k get/set keep_settings_over_reset flag (0/1)\n" \
- " -K set drive keep_features_over_reset flag (0/1)\n" \
- " -L set drive doorlock (0/1) (removable harddisks only)\n" \
- " -m get/set multiple sector count\n" \
- " -n get/set ignore-write-errors flag (0/1)\n" \
- " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
- " -P set drive prefetch count\n" \
- " -q change next setting quietly\n" \
- " -Q get/set DMA tagged-queuing depth (if supported)\n" \
- " -r get/set readonly flag (DANGEROUS to set)\n" \
+ " -I detailed/current information directly from drive\n") \
+ " -k get/set keep_settings_over_reset flag (0/1)\n" \
+ " -K set drive keep_features_over_reset flag (0/1)\n" \
+ " -L set drive doorlock (0/1) (removable harddisks only)\n" \
+ " -m get/set multiple sector count\n" \
+ " -n get/set ignore-write-errors flag (0/1)\n" \
+ " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
+ " -P set drive prefetch count\n" \
+ " -q change next setting quietly\n" \
+ " -Q get/set DMA tagged-queuing depth (if supported)\n" \
+ " -r get/set readonly flag (DANGEROUS to set)\n" \
USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
- " -R register an IDE interface (DANGEROUS)\n") \
- " -S set standby (spindown) timeout\n" \
- " -t perform device read timings\n" \
- " -T perform cache read timings\n" \
- " -u get/set unmaskirq flag (0/1)\n" \
+ " -R register an IDE interface (DANGEROUS)\n") \
+ " -S set standby (spindown) timeout\n" \
+ " -t perform device read timings\n" \
+ " -T perform cache read timings\n" \
+ " -u get/set unmaskirq flag (0/1)\n" \
USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
- " -U un-register an IDE interface (DANGEROUS)\n") \
- " -v defaults; same as -mcudkrag for IDE drives\n" \
- " -V display program version and exit immediately\n" \
+ " -U un-register an IDE interface (DANGEROUS)\n") \
+ " -v defaults; same as -mcudkrag for IDE drives\n" \
+ " -V display program version and exit immediately\n" \
USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
- " -w perform device reset (DANGEROUS)\n") \
- " -W set drive write-caching flag (0/1) (DANGEROUS)\n" \
+ " -w perform device reset (DANGEROUS)\n") \
+ " -W set drive write-caching flag (0/1) (DANGEROUS)\n" \
USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
- " -x tristate device for hotswap (0/1) (DANGEROUS)\n") \
- " -X set IDE xfer mode (DANGEROUS)\n" \
- " -y put IDE drive in standby mode\n" \
- " -Y put IDE drive to sleep\n" \
- " -Z disable Seagate auto-powersaving mode\n" \
- " -z re-read partition table"
+ " -x tristate device for hotswap (0/1) (DANGEROUS)\n") \
+ " -X set IDE xfer mode (DANGEROUS)\n" \
+ " -y put IDE drive in standby mode\n" \
+ " -Y put IDE drive to sleep\n" \
+ " -Z disable Seagate auto-powersaving mode\n" \
+ " -z re-read partition table"
#define head_trivial_usage \
"[OPTION]... [FILE]..."
#define head_full_usage \
"Print first 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
- "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
- "Options:" \
+ "file name. With no FILE, or when FILE is -, read standard input" \
+ "\n\nOptions:" \
"\n -n NUM Print first NUM lines instead of first 10" \
USE_FEATURE_FANCY_HEAD( \
"\n -c NUM output the first NUM bytes" \
@@ -1190,7 +1194,8 @@
#define hexdump_full_usage \
"The hexdump utility is a filter which displays the specified files,\n" \
"or the standard input, if no files are specified, in a user specified\n" \
- "format\n" \
+ "format" \
+ "\n\nOptions:\n" \
" -b One-byte octal display\n" \
" -c One-byte character display\n" \
" -C Canonical hex+ASCII, 16 bytes per line\n" \
@@ -1212,8 +1217,8 @@
"[OPTION] {hostname | -F FILE}"
#define hostname_full_usage \
"Get or set the hostname or DNS domain name. If a hostname is given\n" \
- "(or FILE with the -F parameter), the host name will be set.\n\n" \
- "Options:\n" \
+ "(or FILE with the -F parameter), the host name will be set." \
+ "\n\nOptions:\n" \
" -s Short\n" \
" -i Addresses for the hostname\n" \
" -d DNS domain name\n" \
@@ -1233,8 +1238,8 @@
" [-h home]" \
" [-d/-e <string>]"
#define httpd_full_usage \
- "Listens for incoming http server requests.\n\n" \
- "Options:\n" \
+ "Listens for incoming http server requests" \
+ "\n\nOptions:\n" \
" -c FILE Specifies configuration file. (default httpd.conf)\n" \
" -p PORT Server port (default 80)\n" \
" -i Assume that we are started from inetd\n" \
@@ -1252,8 +1257,8 @@
#define hwclock_trivial_usage \
"[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]"
#define hwclock_full_usage \
- "Query and set the hardware clock (RTC)\n\n" \
- "Options:\n" \
+ "Query and set the hardware clock (RTC)" \
+ "\n\nOptions:\n" \
" -r read hardware clock and print result\n" \
" -s set the system time from the hardware clock\n" \
" -w set the hardware clock to the current system time\n" \
@@ -1263,8 +1268,8 @@
#define id_trivial_usage \
"[OPTIONS]... [USERNAME]"
#define id_full_usage \
- "Print information for USERNAME or the current user\n\n" \
- "Options:\n" \
+ "Print information for USERNAME or the current user" \
+ "\n\nOptions:\n" \
USE_SELINUX( \
" -c prints only the security context\n") \
" -g prints only the group ID\n" \
@@ -1278,8 +1283,8 @@
#define ifconfig_trivial_usage \
USE_FEATURE_IFCONFIG_STATUS("[-a]") " <interface> [<address>]"
#define ifconfig_full_usage \
- "configure a network interface\n\n" \
- "Options:\n" \
+ "Configure a network interface" \
+ "\n\nOptions:\n" \
USE_FEATURE_IPV6( \
" [add <address>[/<prefixlen>]]\n") \
USE_FEATURE_IPV6( \
@@ -1298,7 +1303,6 @@
#define ifup_trivial_usage \
"<-ahinv> <ifaces...>"
#define ifup_full_usage \
- "ifup <options> <ifaces...>\n\n" \
"Options:\n" \
" -h this help\n" \
" -a de/configure all interfaces automatically\n" \
@@ -1312,7 +1316,6 @@
#define ifdown_trivial_usage \
"<-ahinv> <ifaces...>"
#define ifdown_full_usage \
- "ifdown <options> <ifaces...>\n\n" \
"Options:\n" \
" -h this help\n" \
" -a de/configure all interfaces automatically\n" \
@@ -1326,8 +1329,8 @@
#define inetd_trivial_usage \
"[-f] [-q len] [conf]"
#define inetd_full_usage \
- "Listens for network connections and launches programs\n\n" \
- "Option:\n" \
+ "Listens for network connections and launches programs" \
+ "\n\nOptions:\n" \
" -f Run as a foreground progress\n" \
" -q Sets the size of the socket listen queue to\n" \
" the specified value. Default is 128"
@@ -1466,8 +1469,8 @@
#define insmod_trivial_usage \
"[OPTION]... MODULE [symbol=value]..."
#define insmod_full_usage \
- "Loads the specified kernel modules into the kernel.\n\n" \
- "Options:\n" \
+ "Loads the specified kernel modules into the kernel" \
+ "\n\nOptions:\n" \
" -f Force module to load into the wrong kernel version\n" \
" -k Make module autoclean-able\n" \
" -v verbose output\n" \
@@ -1481,8 +1484,8 @@
#define install_trivial_usage \
"[-cgmops] [sources] <dest|directory>"
#define install_full_usage \
- "Copies files and set attributes\n\n" \
- "Options:\n" \
+ "Copies files and set attributes" \
+ "\n\nOptions:\n" \
" -c copy the file, default\n" \
" -d create directories\n" \
" -g set group ownership\n" \
@@ -1513,8 +1516,8 @@
#define ipcalc_trivial_usage \
"[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]"
#define ipcalc_full_usage \
- "Calculate IP network settings from a IP address\n\n" \
- "Options:\n" \
+ "Calculate IP network settings from a IP address" \
+ "\n\nOptions:\n" \
" -b --broadcast Display calculated broadcast address\n" \
" -n --network Display calculated network address\n" \
" -m --netmask Display default netmask for IP" \
@@ -1592,8 +1595,8 @@
#define kill_trivial_usage \
"[-l] [-signal] process-id [process-id ...]"
#define kill_full_usage \
- "Send a signal (default is TERM) to the specified process(es).\n\n" \
- "Options:\n" \
+ "Send a signal (default is TERM) to the specified process(es)" \
+ "\n\nOptions:\n" \
" -l List all signal names and numbers"
#define kill_example_usage \
"$ ps | grep apache\n" \
@@ -1608,8 +1611,8 @@
#define killall_trivial_usage \
"[-l] [-q] [-signal] process-name [process-name ...]"
#define killall_full_usage \
- "Send a signal (default is TERM) to the specified process(es).\n\n" \
- "Options:\n" \
+ "Send a signal (default is TERM) to the specified process(es)" \
+ "\n\nOptions:\n" \
" -l List all signal names and numbers\n" \
" -q Do not complain if no processes were killed"
#define killall_example_usage \
@@ -1618,15 +1621,15 @@
#define killall5_trivial_usage \
"[-l] [-signal]"
#define killall5_full_usage \
- "Send a signal (default is TERM) to all processes outside current session.\n\n" \
- "Options:\n" \
+ "Send a signal (default is TERM) to all processes outside current session" \
+ "\n\nOptions:\n" \
" -l List all signal names and numbers\n" \
#define klogd_trivial_usage \
"[-c n] [-n]"
#define klogd_full_usage \
- "Kernel logger.\n" \
- "Options:\n" \
+ "Kernel logger" \
+ "\n\nOptions:\n" \
" -c n Sets the default log level of console messages to n\n" \
" -n Run as a foreground process"
@@ -1642,8 +1645,8 @@
"[-EMNmh~?] FILE1 FILE2..."
#define less_full_usage \
"View a file or list of files. The position within files can be\n" \
- "changed, and files can be manipulated in various ways with the\n" \
- "following options:\n\n" \
+ "changed, and files can be manipulated in various ways" \
+ "\n\nOptions:\n" \
" -E Quit once the end of a file is reached\n" \
" -M Display a status line containing the current line numbers\n" \
" and the percentage through the file\n" \
@@ -1664,9 +1667,9 @@
#define ln_trivial_usage \
"[OPTION] TARGET... LINK_NAME|DIRECTORY"
#define ln_full_usage \
- "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n" \
- "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \
- "Options:\n" \
+ "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
+ "You may use '--' to indicate that all following arguments are non-options." \
+ "\n\nOptions:\n" \
" -s make symbolic links instead of hard links\n" \
" -f remove existing destination files\n" \
" -n no dereference symlinks - treat like normal file\n" \
@@ -1694,8 +1697,8 @@
#define logger_trivial_usage \
"[OPTION]... [MESSAGE]"
#define logger_full_usage \
- "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
- "Options:\n" \
+ "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \
+ "\n\nOptions:\n" \
" -s Log to stderr as well as the system log\n" \
" -t TAG Log using the specified tag (defaults to user name)\n" \
" -p PRIORITY Enter the message with the specified priority\n" \
@@ -1706,8 +1709,8 @@
#define login_trivial_usage \
"[OPTION]... [username] [ENV=VAR ...]"
#define login_full_usage \
- "Begin a new session on the system\n\n" \
- "Options:\n" \
+ "Begin a new session on the system" \
+ "\n\nOptions:\n" \
" -f Do not authenticate (user already authenticated)\n" \
" -h Name of the remote host for this login\n" \
" -p Preserve environment"
@@ -1723,15 +1726,15 @@
#define logread_trivial_usage \
"[OPTION]..."
#define logread_full_usage \
- "Shows the messages from syslogd (using circular buffer).\n\n" \
- "Options:\n" \
+ "Shows the messages from syslogd (using circular buffer)" \
+ "\n\nOptions:\n" \
" -f output data as the log grows"
#define losetup_trivial_usage \
"[-o OFFSET] [-d] LOOPDEVICE [FILE]]"
#define losetup_full_usage \
- "(Dis)associate LOOPDEVICE with FILE, or display current associations.\n\n" \
- "Options:\n" \
+ "(Dis)associate LOOPDEVICE with FILE, or display current associations" \
+ "\n\nOptions:\n" \
" -d Disassociate LOOPDEVICE\n" \
" -o OFFSET Start OFFSET bytes into FILE"
#define losetup_notes_usage \
@@ -1752,8 +1755,8 @@
USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \
USE_SELINUX("K") "] [filenames...]"
#define ls_full_usage \
- "List directory contents\n\n" \
- "Options:" \
+ "List directory contents" \
+ "\n\nOptions:" \
"\n -1 list files in a single column" \
"\n -A do not list implied . and .." \
"\n -a do not hide entries starting with ." \
@@ -1804,8 +1807,8 @@
#define lsattr_trivial_usage \
"[-Radlv] [files...]"
#define lsattr_full_usage \
- "list file attributes on an ext2 fs\n\n" \
- "Options:\n" \
+ "List file attributes on an ext2 fs" \
+ "\n\nOptions:\n" \
" -R recursively list subdirectories\n" \
" -a do not hide entries starting with .\n" \
" -d list directory entries instead of contents\n" \
@@ -1877,8 +1880,8 @@
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
#define md5sum_full_usage \
- "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \
- "Options:\n" \
+ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
+ "\n\nOptions:\n" \
"With no FILE, or when FILE is -, read standard input." \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
" -c check MD5 sums against given list\n" \
@@ -1931,8 +1934,8 @@
#define mkdir_trivial_usage \
"[OPTION] DIRECTORY..."
#define mkdir_full_usage \
- "Create the DIRECTORY(ies) if they do not already exist\n\n" \
- "Options:\n" \
+ "Create the DIRECTORY(ies) if they do not already exist" \
+ "\n\nOptions:\n" \
" -m set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
" -p no error if existing, make parent directories as needed"
#define mkdir_example_usage \
@@ -1977,15 +1980,15 @@
#define mkfifo_trivial_usage \
"[OPTIONS] name"
#define mkfifo_full_usage \
- "Creates a named pipe (identical to 'mknod name p')\n\n" \
- "Options:\n" \
+ "Creates a named pipe (identical to 'mknod name p')" \
+ "\n\nOptions:\n" \
" -m create the pipe using the specified mode (default a=rw)"
#define mkfs_minix_trivial_usage \
"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#define mkfs_minix_full_usage \
- "Make a MINIX filesystem.\n\n" \
- "Options:\n" \
+ "Make a MINIX filesystem" \
+ "\n\nOptions:\n" \
" -c Check the device for bad blocks\n" \
" -n [14|30] Specify the maximum length of filenames\n" \
" -i INODES Specify the number of inodes for the filesystem\n" \
@@ -1995,10 +1998,10 @@
#define mknod_trivial_usage \
"[OPTIONS] NAME TYPE MAJOR MINOR"
#define mknod_full_usage \
- "Create a special file (block, character, or pipe).\n\n" \
- "Options:\n" \
- " -m create the special file using the specified mode (default a=rw)\n\n" \
- "TYPEs include:\n" \
+ "Create a special file (block, character, or pipe)" \
+ "\n\nOptions:\n" \
+ " -m create the special file using the specified mode (default a=rw)" \
+ "\n\nTYPEs include:\n" \
" b: Make a block (buffered) device\n" \
" c or u: Make a character (un-buffered) device\n" \
" p: Make a named pipe. MAJOR and MINOR are ignored for named pipes"
@@ -2009,8 +2012,8 @@
#define mkswap_trivial_usage \
"[-c] [-v0|-v1] device [block-count]"
#define mkswap_full_usage \
- "Prepare a disk partition to be used as a swap partition.\n\n" \
- "Options:\n" \
+ "Prepare a disk partition to be used as a swap partition" \
+ "\n\nOptions:\n" \
" -c Check for read-ability\n" \
" -v0 Make version 0 swap [max 128 Megs]\n" \
" -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \
@@ -2020,8 +2023,8 @@
"[-dq] TEMPLATE"
#define mktemp_full_usage \
"Creates a temporary file with its name based on TEMPLATE.\n" \
- "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX).\n\n" \
- "Options:\n" \
+ "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \
+ "\n\nOptions:\n" \
" -d Make a directory instead of a file\n" \
" -q Fail silently if an error occurs"
#define mktemp_example_usage \
@@ -2110,8 +2113,8 @@
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
- "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n\n" \
- "Flags:\n" \
+ "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \
+ "\n\nOptions:\n" \
" -a: Mount all filesystems in fstab\n" \
USE_FEATURE_MTAB_SUPPORT( \
" -f: \"Fake\" Add entry to mount table but don't mount it\n" \
@@ -2158,8 +2161,8 @@
#define mountpoint_trivial_usage \
"[-q] <[-d] DIR | -x DEVICE>"
#define mountpoint_full_usage \
- "mountpoint checks if the directory is a mountpoint\n\n" \
- "Options:\n" \
+ "mountpoint checks if the directory is a mountpoint" \
+ "\n\nOptions:\n" \
" -q Be more quiet\n" \
" -d Print major/minor device number of the filesystem\n" \
" -x Print major/minor device number of the blockdevice"
@@ -2183,8 +2186,8 @@
"[OPTION]... SOURCE DEST\n" \
"or: mv [OPTION]... SOURCE... DIRECTORY"
#define mv_full_usage \
- "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \
- "Options:\n" \
+ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \
+ "\n\nOptions:\n" \
" -f don't prompt before overwriting\n" \
" -i interactive, prompt before overwrite"
#define mv_example_usage \
@@ -2193,8 +2196,8 @@
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage \
- "Nameif renames network interface while it in the down state.\n\n" \
- "Options:\n" \
+ "Renames network interface while it in the down state" \
+ "\n\nOptions:\n" \
" -c FILE Use configuration file (default is /etc/mactab)\n" \
" -s Use syslog (LOCAL0 facility)\n" \
" IFNAME MACADDR new_interface_name interface_mac_address"
@@ -2230,10 +2233,10 @@
#define nc_notes_usage "" \
USE_NC_EXTRA( \
- "To use netcat as a terminal emulator on a serial port:\n\n" \
- "$ stty 115200 -F /dev/ttyS0\n" \
- "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
- ) ""
+ "To use netcat as a terminal emulator on a serial port:\n\n" \
+ "$ stty 115200 -F /dev/ttyS0\n" \
+ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \
+ )
#define nc_example_usage \
"$ nc foobar.somedomain.com 25\n" \
@@ -2248,8 +2251,8 @@
#define netstat_trivial_usage \
"[-laenrtuwx]"
#define netstat_full_usage \
- "Netstat displays Linux networking information.\n\n" \
- "Options:\n" \
+ "Displays Linux networking information" \
+ "\n\nOptions:\n" \
" -l display listening server sockets\n" \
" -a display all sockets (default: connected)\n" \
" -e display other/more information\n" \
@@ -2263,8 +2266,8 @@
#define nice_trivial_usage \
"[-n ADJUST] [COMMAND [ARG] ...]"
#define nice_full_usage \
- "Nice runs a program with modified scheduling priority.\n\n" \
- "Options:\n" \
+ "Runs a program with modified scheduling priority" \
+ "\n\nOptions:\n" \
" -n ADJUST Adjust the scheduling priority by ADJUST"
#define nmeter_trivial_usage \
@@ -2328,8 +2331,8 @@
"[OPTION] [name]"
#define passwd_full_usage \
"Change a user password. If no name is specified,\n" \
- "changes the password for the current user.\n" \
- "Options:\n" \
+ "changes the password for the current user." \
+ "\n\nOptions:\n" \
" -a Define which algorithm shall be used for the password\n" \
" (Choices: des, md5)\n" /* ", sha1)" */ \
" -d Delete the password for the specified user account\n" \
@@ -2348,7 +2351,7 @@
#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
#define USAGE_PIDOF "Options:"
#else
-#define USAGE_PIDOF "\n This version of pidof accepts no options."
+#define USAGE_PIDOF "\nThis version of pidof accepts no options."
#endif
#define pidof_trivial_usage \
@@ -2379,8 +2382,8 @@
#define ping_trivial_usage \
"[OPTION]... host"
#define ping_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
- "Options:\n" \
+ "Send ICMP ECHO_REQUEST packets to network hosts" \
+ "\n\nOptions:\n" \
" -c CNT Send only CNT pings\n" \
" -s SIZE Send SIZE data bytes in packets (default=56)\n" \
" -I IP Use IP as source address\n" \
@@ -2403,8 +2406,8 @@
#define ping6_trivial_usage \
"[OPTION]... host"
#define ping6_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \
- "Options:\n" \
+ "Send ICMP ECHO_REQUEST packets to network hosts" \
+ "\n\nOptions:\n" \
" -c CNT Send only CNT pings\n" \
" -s SIZE Send SIZE data bytes in packets (default=56)\n" \
" -q Quiet mode, only displays output at start\n" \
@@ -2428,8 +2431,8 @@
#define poweroff_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define poweroff_full_usage \
- "Halt and shut off power.\n" \
- "Options:\n" \
+ "Halt and shut off power" \
+ "\n\nOptions:\n" \
" -d delay interval for halting\n" \
" -n no call to sync()\n" \
" -f force power off (don't go through init)"
@@ -2455,8 +2458,8 @@
#define ps_trivial_usage \
""
#define ps_full_usage \
- "Report process status\n" \
- "\nOptions:" \
+ "Report process status" \
+ "\n\nOptions:" \
"\n -o col1,col2=header Select columns for display" \
#else /* !ENABLE_DESKTOP */
@@ -2511,8 +2514,8 @@
#define rdate_trivial_usage \
"[-sp] HOST"
#define rdate_full_usage \
- "Get and possibly set the system date and time from a remote HOST.\n\n" \
- "Options:\n" \
+ "Get and possibly set the system date and time from a remote HOST" \
+ "\n\nOptions:\n" \
" -s Set the system date and time (default)\n" \
" -p Print the date and time"
@@ -2553,8 +2556,8 @@
#define reboot_trivial_usage \
"[-d<delay>] [-n<nosync>] [-f<force>]"
#define reboot_full_usage \
- "Reboot the system.\n" \
- "Options:\n" \
+ "Reboot the system" \
+ "\n\nOptions:\n" \
" -d delay interval for rebooting\n" \
" -n no call to sync()\n" \
" -f force reboot (don't go through init)"
@@ -2562,8 +2565,8 @@
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]"
#define renice_full_usage \
- "Changes priority of running processes.\n\n" \
- "Options:\n" \
+ "Changes priority of running processes" \
+ "\n\nOptions:\n" \
" -n adjusts current nice value (smaller is faster)\n" \
" -p process id(s) (default)\n" \
" -g process group id(s)\n" \
@@ -2583,8 +2586,8 @@
"[OPTION]... FILE..."
#define rm_full_usage \
"Remove (unlink) the FILE(s). You may use '--' to\n" \
- "indicate that all following arguments are non-options.\n\n" \
- "Options:\n" \
+ "indicate that all following arguments are non-options." \
+ "\n\nOptions:\n" \
" -i always prompt before removing each destination\n" \
" -f remove existing destinations, never prompt\n" \
" -r,-R remove the contents of directories recursively"
@@ -2601,8 +2604,8 @@
#define rmmod_trivial_usage \
"[OPTION]... [MODULE]..."
#define rmmod_full_usage \
- "Unloads the specified kernel modules from the kernel.\n\n" \
- "Options:\n" \
+ "Unloads the specified kernel modules from the kernel" \
+ "\n\nOptions:\n" \
" -a Remove all unused modules (recursively)"
#define rmmod_example_usage \
"$ rmmod tulip\n"
@@ -2610,8 +2613,8 @@
#define route_trivial_usage \
"[{add|del|delete}]"
#define route_full_usage \
- "Edit the kernel's routing tables.\n\n" \
- "Options:\n" \
+ "Edit the kernel's routing tables" \
+ "\n\nOptions:\n" \
" -n Dont resolve names\n" \
" -e Display other/more information\n" \
" -A inet" USE_FEATURE_IPV6("{6}") " Select address family"
@@ -2621,13 +2624,13 @@
#define rpm_full_usage \
"Manipulates RPM packages" \
"\n\nOptions:" \
- "\n -i Install package" \
- "\n -q Query package" \
- "\n -p Query uninstalled package" \
- "\n -i Show information" \
- "\n -l List contents" \
- "\n -d List documents" \
- "\n -c List config files"
+ "\n -i Install package" \
+ "\n -q Query package" \
+ "\n -p Query uninstalled package" \
+ "\n -i Show information" \
+ "\n -l List contents" \
+ "\n -d List documents" \
+ "\n -c List config files"
#define rpm2cpio_trivial_usage \
"package.rpm"
@@ -2637,8 +2640,8 @@
#define run_parts_trivial_usage \
"[-t] [-a ARG] [-u MASK] DIRECTORY"
#define run_parts_full_usage \
- "Run a bunch of scripts in a directory.\n\n" \
- "Options:\n" \
+ "Run a bunch of scripts in a directory" \
+ "\n\nOptions:\n" \
" -t Prints what would be run, but does not actually run anything\n" \
" -a ARG Pass ARG as an argument for every program invoked\n" \
" -u MASK Set the umask to MASK before executing every program"
@@ -2703,8 +2706,8 @@
#define setconsole_trivial_usage \
"[-r|--reset] [DEVICE]"
#define setconsole_full_usage \
- "Redirects system console output to DEVICE (default: /dev/tty).\n\n" \
- "Options:\n" \
+ "Redirects system console output to DEVICE (default: /dev/tty)" \
+ "\n\nOptions:\n" \
" -r Reset output to /dev/console."
#define setkeycodes_trivial_usage \
@@ -2751,10 +2754,10 @@
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
#define sha1sum_full_usage \
- "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \
- "Options:\n" \
+ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \
"With no FILE, or when FILE is -, read standard input." \
- USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
+ "\n\nOptions:\n" \
+ USE_FEATURE_MD5_SHA1_SUM_CHECK( \
" -c check SHA1 sums against given list\n" \
"\nThe following two options are useful only when verifying checksums:\n" \
" -s don't output anything, status code shows success\n" \
@@ -2779,8 +2782,8 @@
USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") \
"] [FILE]..."
#define sort_full_usage \
- "Sorts lines of text in the specified files\n\n" \
- "Options:\n" \
+ "Sorts lines of text in the specified files" \
+ "\n\nOptions:\n" \
USE_FEATURE_SORT_BIG( \
" -b ignore leading blanks\n" \
" -c check whether input is sorted\n" \
@@ -2846,8 +2849,8 @@
#define stat_trivial_usage \
"[OPTION] FILE..."
#define stat_full_usage \
- "display file (default) or filesystem status.\n\n" \
- "Options:\n" \
+ "Display file (default) or filesystem status" \
+ "\n\nOptions:\n" \
USE_FEATURE_STAT_FORMAT( \
" -c fmt use the specified format\n") \
" -f display filesystem status\n" \
@@ -2920,24 +2923,24 @@
#define su_trivial_usage \
"[OPTION]... [-] [username]"
#define su_full_usage \
- "Change user id or become root.\n" \
- "Options:\n" \
- " -p, -m Preserve environment" \
+ "Change user id or become root" \
+ "\n\nOptions:" \
+ "\n -p, -m Preserve environment" \
"\n -c Command to pass to 'sh -c'" \
"\n -s Shell to use instead of default shell"
#define sulogin_trivial_usage \
"[OPTION]... [tty-device]"
#define sulogin_full_usage \
- "Single user login\n" \
- "Options:\n" \
- " -t Timeout"
+ "Single user login" \
+ "\n\nOptions:" \
+ "\n -t Timeout"
#define sum_trivial_usage \
"[rs] [files...]"
#define sum_full_usage \
- "checksum and count the blocks in a file\n\n" \
- "Options:\n" \
+ "Checksum and count the blocks in a file" \
+ "\n\nOptions:\n" \
" -r use BSD sum algorithm (1K blocks)\n" \
" -s use System V sum algorithm (512byte blocks)"
@@ -2957,23 +2960,23 @@
#define swapoff_trivial_usage \
"[-a] [DEVICE]"
#define swapoff_full_usage \
- "Stop swapping virtual memory pages on DEVICE.\n\n" \
- "Options:\n" \
+ "Stop swapping virtual memory pages on DEVICE" \
+ "\n\nOptions:\n" \
" -a Stop swapping on all swap devices"
#define swapon_trivial_usage \
"[-a] [DEVICE]"
#define swapon_full_usage \
- "Start swapping virtual memory pages on DEVICE.\n\n" \
- "Options:\n" \
+ "Start swapping virtual memory pages on DEVICE" \
+ "\n\nOptions:\n" \
" -a Start swapping on all swap devices"
#define switch_root_trivial_usage \
"[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
#define switch_root_full_usage \
"Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
- "and exec NEW_INIT.\n\n" \
- "Options:\n" \
+ "and exec NEW_INIT" \
+ "\n\nOptions:\n" \
" -c Redirect console to device on new root"
#define sync_trivial_usage \
@@ -2984,8 +2987,8 @@
#define sysctl_trivial_usage \
"[OPTIONS]... [VALUE]..."
#define sysctl_full_usage \
- "configure kernel parameters at runtime\n\n" \
- "Options:\n" \
+ "Configure kernel parameters at runtime" \
+ "\n\nOptions:\n" \
" -n Use this option to disable printing of the key name when printing values\n" \
" -w Use this option when you want to change a sysctl setting\n" \
" -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \
@@ -3002,13 +3005,13 @@
"[OPTION]..."
#define syslogd_full_usage \
"Linux system and kernel logging utility.\n" \
- "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
- "Options:\n" \
- " -m MIN Minutes between MARK lines (default=20, 0=off)\n" \
- " -n Run as a foreground process\n" \
- " -O FILE Use an alternate log file (default=/var/log/messages)\n" \
- " -l n Sets the local log level of messages to n\n" \
- " -S Make logging output smaller" \
+ "Note that this version of syslogd ignores /etc/syslog.conf." \
+ "\n\nOptions:" \
+ "\n -m MIN Minutes between MARK lines (default=20, 0=off)" \
+ "\n -n Run as a foreground process" \
+ "\n -O FILE Use an alternate log file (default=/var/log/messages)" \
+ "\n -l n Sets the local log level of messages to n" \
+ "\n -S Make logging output smaller" \
USE_FEATURE_ROTATE_LOGFILE( \
"\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \
"\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \
@@ -3026,16 +3029,17 @@
#define tail_full_usage \
"Print last 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
- "file name. With no FILE, or when FILE is -, read standard input.\n\n" \
- "Options:\n" \
+ "file name. With no FILE, or when FILE is -, read standard input." \
+ "\n\nOptions:" \
USE_FEATURE_FANCY_TAIL( \
- " -c N[kbm] output the last N bytes\n") \
- " -n N[kbm] print last N lines instead of last 10\n" \
- " -f output data as the file grows" \
+ "\n -c N[kbm] output the last N bytes") \
+ "\n -n N[kbm] print last N lines instead of last 10" \
+ "\n -f output data as the file grows" \
USE_FEATURE_FANCY_TAIL( \
- "\n -q never output headers giving file names\n" \
- " -s SEC wait SEC seconds between reads with -f\n" \
- " -v always output headers giving file names\n\n" \
+ "\n -q never output headers giving file names" \
+ "\n -s SEC wait SEC seconds between reads with -f" \
+ "\n -v always output headers giving file names" \
+ "\n\n" \
"If the first character of N (bytes or lines) is a '+', output begins with\n" \
"the Nth item from the start of each file, otherwise, print the last N items\n" \
"in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
@@ -3050,8 +3054,8 @@
USE_FEATURE_TAR_FROM("[-X FILE] ") \
"[-f TARFILE] [-C DIR] [FILE(s)] ..."
#define tar_full_usage \
- "Create, extract, or list files from a tar file.\n\n" \
- "Options:\n" \
+ "Create, extract, or list files from a tar file" \
+ "\n\nOptions:\n" \
USE_FEATURE_TAR_CREATE( \
" c create\n") \
" x extract\n" \
@@ -3078,27 +3082,27 @@
"$ tar -cf /tmp/tarball.tar /usr/local\n"
#define taskset_trivial_usage \
- "[OPTIONS] [mask] [pid | command [arg]...]"
+ "[OPTIONS] [mask] [pid | command [arg]...]"
#define taskset_full_usage \
- "Set or get CPU affinity.\n\n" \
- "Options:\n" \
- " -p operate on an existing PID"
+ "Set or get CPU affinity" \
+ "\n\nOptions:\n" \
+ " -p operate on an existing PID"
#define taskset_example_usage \
- "$ taskset 0x7 ./dgemm_test&\n" \
- "$ taskset -p 0x1 $!\n" \
- "pid 4790's current affinity mask: 7\n" \
- "pid 4790's new affinity mask: 1\n" \
- "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
- "pid 6671's current affinity mask: 1\n" \
- "pid 6671's new affinity mask: 1\n" \
- "$ taskset -p 1\n"
- "pid 1's current affinity mask: 3\n"
+ "$ taskset 0x7 ./dgemm_test&\n" \
+ "$ taskset -p 0x1 $!\n" \
+ "pid 4790's current affinity mask: 7\n" \
+ "pid 4790's new affinity mask: 1\n" \
+ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
+ "pid 6671's current affinity mask: 1\n" \
+ "pid 6671's new affinity mask: 1\n" \
+ "$ taskset -p 1\n" \
+ "pid 1's current affinity mask: 3\n"
#define tee_trivial_usage \
"[OPTION]... [FILE]..."
#define tee_full_usage \
- "Copy standard input to each FILE, and also to standard output.\n\n" \
- "Options:\n" \
+ "Copy standard input to each FILE, and also to standard output" \
+ "\n\nOptions:\n" \
" -a append to the given FILEs, do not overwrite\n" \
" -i ignore interrupt signals (SIGINT)"
#define tee_example_usage \
@@ -3111,8 +3115,8 @@
"[-a] [-l USER] HOST [PORT]"
#define telnet_full_usage \
"Telnet is used to establish interactive communication with another\n" \
- "computer over a network using the TELNET protocol.\n\n" \
- "Options:\n" \
+ "computer over a network using the TELNET protocol" \
+ "\n\nOptions:\n" \
" -a Attempt an automatic login with the USER variable\n" \
" -l USER Attempt an automatic login with the USER argument\n" \
" HOST The official name, alias or the IP address of the\n" \
@@ -3131,8 +3135,8 @@
#define telnetd_trivial_usage \
"[OPTION]"
#define telnetd_full_usage \
- "Telnetd listens for incoming TELNET connections on PORT.\n" \
- "Options:\n" \
+ "Telnetd listens for incoming TELNET connections on PORT" \
+ "\n\nOptions:\n" \
" -p PORT listen for connections on PORT (default 23)\n" \
" -l LOGIN exec LOGIN on connect\n" \
" -f issue_file Display issue_file instead of /etc/issue\n" \
@@ -3142,10 +3146,17 @@
#define telnetd_trivial_usage \
"[OPTION]"
#define telnetd_full_usage \
- "Telnetd uses incoming TELNET connections via inetd.\n" \
- "Options:\n" \
- " -l LOGIN exec LOGIN on connect\n" \
- " -f issue_file Display issue_file instead of /etc/issue"
+ "Telnetd uses incoming TELNET connections" \
+ SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \
+ "\n\nOptions:" \
+ "\n -l LOGIN exec LOGIN on connect" \
+ "\n -f issue_file Display issue_file instead of /etc/issue" \
+ USE_FEATURE_TELNETD_STANDALONE( \
+ "\n -p PORT port to listen to" \
+ "\n -b ADDR address to bind to" \
+ "\n -F stay in foreground" \
+ "\n -i inetd subservice" \
+ )
#endif
#define test_trivial_usage \
@@ -3170,10 +3181,10 @@
#define tftp_trivial_usage \
"[OPTION]... HOST [PORT]"
#define tftp_full_usage \
- "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
- "Options:\n" \
- " -l FILE Local FILE\n" \
- " -r FILE Remote FILE" \
+ "Transfers a file from/to a tftp server using \"octet\" mode" \
+ "\n\nOptions:" \
+ "\n -l FILE Local FILE" \
+ "\n -r FILE Remote FILE" \
USE_FEATURE_TFTP_GET( \
"\n -g Get file" \
) \
@@ -3187,8 +3198,8 @@
"[OPTION]... COMMAND [ARGS...]"
#define time_full_usage \
"Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
- "COMMAND's resource usage information is displayed\n\n" \
- "Options:\n" \
+ "COMMAND's resource usage information is displayed." \
+ "\n\nOptions:\n" \
" -v Displays verbose resource usage information"
#define top_trivial_usage \
@@ -3201,8 +3212,8 @@
#define touch_trivial_usage \
"[-c] FILE [FILE ...]"
#define touch_full_usage \
- "Update the last-modified date on the given FILE[s].\n\n" \
- "Options:\n" \
+ "Update the last-modified date on the given FILE[s]" \
+ "\n\nOptions:\n" \
" -c Do not create any files"
#define touch_example_usage \
"$ ls -l /tmp/foo\n" \
@@ -3215,8 +3226,8 @@
"[-cds] STRING1 [STRING2]"
#define tr_full_usage \
"Translate, squeeze, and/or delete characters from\n" \
- "standard input, writing to standard output.\n\n" \
- "Options:\n" \
+ "standard input, writing to standard output" \
+ "\n\nOptions:\n" \
" -c take complement of STRING1\n" \
" -d delete input characters coded STRING1\n" \
" -s squeeze multiple output characters of STRING2 into one character"
@@ -3229,8 +3240,8 @@
" [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
" [-z pausemsecs] host [data size]"
#define traceroute_full_usage \
- "trace the route ip packets follow going to \"host\"\n" \
- "Options:\n" \
+ "Trace the route ip packets follow going to \"host\"" \
+ "\n\nOptions:\n" \
" -F Set the don't fragment bit\n" \
" -I Use ICMP ECHO instead of UDP datagrams\n" \
" -l Display the ttl value of the returned packet\n" \
@@ -3263,8 +3274,8 @@
#define tty_trivial_usage \
""
#define tty_full_usage \
- "Print the file name of the terminal connected to standard input.\n\n" \
- "Options:\n" \
+ "Print the file name of the terminal connected to standard input" \
+ "\n\nOptions:\n" \
" -s print nothing, only return an exit status"
#define tty_example_usage \
"$ tty\n" \
@@ -3324,8 +3335,8 @@
#define uname_trivial_usage \
"[OPTION]..."
#define uname_full_usage \
- "Print certain system information. With no OPTION, same as -s.\n\n" \
- "Options:\n" \
+ "Print certain system information. With no OPTION, same as -s." \
+ "\n\nOptions:\n" \
" -a print all information\n" \
" -m the machine (hardware) type\n" \
" -n print the machine's network node hostname\n" \
@@ -3340,8 +3351,8 @@
#define uncompress_trivial_usage \
"[-c] [-f] [ name ... ]"
#define uncompress_full_usage \
- "Uncompress .Z file[s]\n" \
- "Options:\n" \
+ "Uncompress .Z file[s]" \
+ "\n\nOptions:\n" \
" -c extract to stdout\n" \
" -f force overwrite an existing file"
@@ -3349,8 +3360,8 @@
"[-fscdu]... [INPUT [OUTPUT]]"
#define uniq_full_usage \
"Discard all but one of successive identical lines from INPUT\n" \
- "(or standard input), writing to OUTPUT (or standard output).\n\n" \
- "Options:\n" \
+ "(or standard input), writing to OUTPUT (or standard output)" \
+ "\n\nOptions:\n" \
" -c prefix lines by the number of occurrences\n" \
" -d only print duplicate lines\n" \
" -u only print unique lines\n" \
@@ -3367,16 +3378,16 @@
#define unix2dos_full_usage \
"Converts FILE from unix format to dos format. When no option\n" \
"is given, the input is converted to the opposite output format.\n" \
- "When no file is given, uses stdin for input and stdout for output.\n" \
- "Options:\n" \
+ "When no file is given, uses stdin for input and stdout for output." \
+ "\n\nOptions:\n" \
" -u output will be in UNIX format\n" \
" -d output will be in DOS format"
#define unzip_trivial_usage \
"[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
#define unzip_full_usage \
- "Extracts files from ZIP archives.\n\n" \
- "Options:\n" \
+ "Extracts files from ZIP archives" \
+ "\n\nOptions:\n" \
" -l list archive contents (short form)\n" \
" -n never overwrite existing files (default)\n" \
" -o overwrite files without prompting\n" \
@@ -3404,8 +3415,8 @@
#define uudecode_trivial_usage \
"[FILE]..."
#define uudecode_full_usage \
- "Uudecode a file that is uuencoded.\n\n" \
- "Options:\n" \
+ "Uudecode a file" \
+ "\n\nOptions:\n" \
" -o FILE direct output to FILE"
#define uudecode_example_usage \
"$ uudecode -o busybox busybox.uu\n" \
@@ -3415,8 +3426,8 @@
#define uuencode_trivial_usage \
"[OPTION] [INFILE] REMOTEFILE"
#define uuencode_full_usage \
- "Uuencode a file.\n\n" \
- "Options:\n" \
+ "Uuencode a file" \
+ "\n\nOptions:\n" \
" -m use base64 encoding per RFC1521"
#define uuencode_example_usage \
"$ uuencode busybox busybox\n" \
@@ -3428,8 +3439,8 @@
#define vconfig_trivial_usage \
"COMMAND [OPTIONS] ..."
#define vconfig_full_usage \
- "vconfig lets you create and remove virtual ethernet devices.\n\n" \
- "Options:\n" \
+ "Create and remove virtual ethernet devices" \
+ "\n\nOptions:\n" \
" add [interface-name] [vlan_id]\n" \
" rem [vlan-name]\n" \
" set_flag [interface-name] [flag-num] [0 | 1]\n" \
@@ -3440,23 +3451,23 @@
#define vi_trivial_usage \
"[OPTION] [FILE]..."
#define vi_full_usage \
- "edit FILE.\n\n" \
- "Options:\n" \
+ "Edit FILE" \
+ "\n\nOptions:\n" \
" -R Read-only- do not write to the file"
#define vlock_trivial_usage \
"[OPTIONS]"
#define vlock_full_usage \
- "Lock a virtual terminal. A password is required to unlock\n" \
- "Options:\n" \
+ "Lock a virtual terminal. A password is required to unlock." \
+ "\n\nOptions:\n" \
" -a Lock all VTs"
#define watch_trivial_usage \
"[-n <seconds>] [-t] COMMAND..."
#define watch_full_usage \
- "Executes a program periodically\n\n" \
- "Options:\n" \
- " -n Loop period in seconds - default is 2\n"
+ "Executes a program periodically" \
+ "\n\nOptions:\n" \
+ " -n Loop period in seconds - default is 2\n" \
" -t Don't print header"
#define watch_example_usage \
"$ watch date\n" \
@@ -3467,8 +3478,8 @@
#define watchdog_trivial_usage \
"[-t <seconds>] [-F] DEV"
#define watchdog_full_usage \
- "Periodically write to watchdog device DEV.\n" \
- "Options:\n" \
+ "Periodically write to watchdog device DEV" \
+ "\n\nOptions:\n" \
" -t Timer period in seconds - default is 30\n" \
" -F Stay in the foreground and don't fork"
@@ -3476,8 +3487,8 @@
"[OPTION]... [FILE]..."
#define wc_full_usage \
"Print line, word, and byte counts for each FILE, and a total line if\n" \
- "more than one FILE is specified. With no FILE, read standard input.\n\n" \
- "Options:\n" \
+ "more than one FILE is specified. With no FILE, read standard input." \
+ "\n\nOptions:\n" \
" -c print the byte counts\n" \
" -l print the newline counts\n" \
" -L print the length of the longest line\n" \
@@ -3491,8 +3502,8 @@
" [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \
" [-U|--user-agent agent] url"
#define wget_full_usage \
- "wget retrieves files via HTTP or FTP\n\n" \
- "Options:\n" \
+ "Retrieve files via HTTP or FTP" \
+ "\n\nOptions:\n" \
" -c continue retrieval of aborted transfers\n" \
" -q quiet mode - do not print\n" \
" -P Set directory prefix to DIR\n" \
@@ -3521,8 +3532,8 @@
#define xargs_trivial_usage \
"[OPTIONS] [COMMAND] [ARGS...]"
#define xargs_full_usage \
- "Executes COMMAND on every item given by standard input.\n\n" \
- "Options:\n" \
+ "Executes COMMAND on every item given by standard input" \
+ "\n\nOptions:\n" \
USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
" -p Prompt the user about whether to run each command\n") \
" -r Do not run command for empty read lines\n" \
@@ -3548,8 +3559,8 @@
#define zcip_trivial_usage \
"[OPTIONS] ifname script"
#define zcip_full_usage \
- "zcip manages a ZeroConf IPv4 link-local address.\n" \
- "Options:\n" \
+ "Manage a ZeroConf IPv4 link-local address" \
+ "\n\nOptions:\n" \
" -f foreground mode\n" \
" -q quit after address (no daemon)\n" \
" -r 169.254.x.x request this address first\n" \