aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/usage.src.h2311
1 files changed, 0 insertions, 2311 deletions
diff --git a/include/usage.src.h b/include/usage.src.h
index 2c88c46a1..78beccf4d 100644
--- a/include/usage.src.h
+++ b/include/usage.src.h
@@ -12,2322 +12,11 @@
#ifndef BB_USAGE_H
#define BB_USAGE_H 1
-
#define NOUSAGE_STR "\b"
INSERT
-#define acpid_trivial_usage \
- "[-d] [-c CONFDIR] [-l LOGFILE] [-a ACTIONFILE] [-M MAPFILE] [-e PROC_EVENT_FILE] [-p PIDFILE]"
-#define acpid_full_usage "\n\n" \
- "Listen to ACPI events and spawn specific helpers on event arrival\n" \
- "\nOptions:" \
- "\n -c DIR Config directory [/etc/acpi]" \
- "\n -d Don't daemonize, (implies -f)" \
- "\n -e FILE /proc event file [/proc/acpi/event]" \
- "\n -f Run in foreground" \
- "\n -l FILE Log file [/var/log/acpid.log]" \
- "\n -p FILE Pid file [/var/run/acpid.pid]" \
- "\n -a FILE Action file [/etc/acpid.conf]" \
- "\n -M FILE Map file [/etc/acpi.map]" \
- IF_FEATURE_ACPID_COMPAT( \
- "\n\nAccept and ignore compatibility options -g -m -s -S -v" \
- )
-
-#define acpid_example_usage \
- "Without -e option, acpid uses all /dev/input/event* files\n" \
- "# acpid\n" \
- "# acpid -l /var/log/my-acpi-log\n" \
- "# acpid -e /proc/acpi/event\n"
-
-#define adjtimex_trivial_usage \
- "[-q] [-o OFF] [-f FREQ] [-p TCONST] [-t TICK]"
-#define adjtimex_full_usage "\n\n" \
- "Read and optionally set system timebase parameters. See adjtimex(2)\n" \
- "\nOptions:" \
- "\n -q Quiet" \
- "\n -o OFF Time offset, microseconds" \
- "\n -f FREQ Frequency adjust, integer kernel units (65536 is 1ppm)" \
- "\n (positive values make clock run faster)" \
- "\n -t TICK Microseconds per tick, usually 10000" \
- "\n -p TCONST" \
-
-#define arp_trivial_usage \
- "\n[-vn] [-H HWTYPE] [-i IF] -a [HOSTNAME]" \
- "\n[-v] [-i IF] -d HOSTNAME [pub]" \
- "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [temp]" \
- "\n[-v] [-H HWTYPE] [-i IF] -s HOSTNAME HWADDR [netmask MASK] pub" \
- "\n[-v] [-H HWTYPE] [-i IF] -Ds HOSTNAME IFACE [netmask MASK] pub"
-#define arp_full_usage "\n\n" \
- "Manipulate ARP cache\n" \
- "\nOptions:" \
- "\n -a Display (all) hosts" \
- "\n -s Set new ARP entry" \
- "\n -d Delete a specified entry" \
- "\n -v Verbose" \
- "\n -n Don't resolve names" \
- "\n -i IF Network interface" \
- "\n -D Read <hwaddr> from given device" \
- "\n -A,-p AF Protocol family" \
- "\n -H HWTYPE Hardware address type" \
-
-#define arping_trivial_usage \
- "[-fqbDUA] [-c CNT] [-w TIMEOUT] [-I IFACE] [-s SRC_IP] DST_IP"
-#define arping_full_usage "\n\n" \
- "Send ARP requests/replies\n" \
- "\nOptions:" \
- "\n -f Quit on first ARP reply" \
- "\n -q Quiet" \
- "\n -b Keep broadcasting, don't go unicast" \
- "\n -D Duplicated address detection mode" \
- "\n -U Unsolicited ARP mode, update your neighbors" \
- "\n -A ARP answer mode, update your neighbors" \
- "\n -c N Stop after sending N ARP requests" \
- "\n -w TIMEOUT Time to wait for ARP reply, seconds" \
- "\n -I IFACE Interface to use (default eth0)" \
- "\n -s SRC_IP Sender IP address" \
- "\n DST_IP Target IP address" \
-
-#define beep_trivial_usage \
- "-f FREQ -l LEN -d DELAY -r COUNT -n"
-#define beep_full_usage "\n\n" \
- "Options:" \
- "\n -f Frequency in Hz" \
- "\n -l Length in ms" \
- "\n -d Delay in ms" \
- "\n -r Repetitions" \
- "\n -n Start new tone" \
-
-#define blkid_trivial_usage \
- ""
-#define blkid_full_usage "\n\n" \
- "Print UUIDs of all filesystems"
-
-#define brctl_trivial_usage \
- "COMMAND [BRIDGE [INTERFACE]]"
-#define brctl_full_usage "\n\n" \
- "Manage ethernet bridges\n" \
- "\nCommands:" \
- IF_FEATURE_BRCTL_SHOW( \
- "\n show Show a list of bridges" \
- ) \
- "\n addbr BRIDGE Create BRIDGE" \
- "\n delbr BRIDGE Delete BRIDGE" \
- "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
- "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
- IF_FEATURE_BRCTL_FANCY( \
- "\n setageing BRIDGE TIME Set ageing time" \
- "\n setfd BRIDGE TIME Set bridge forward delay" \
- "\n sethello BRIDGE TIME Set hello time" \
- "\n setmaxage BRIDGE TIME Set max message age" \
- "\n setpathcost BRIDGE COST Set path cost" \
- "\n setportprio BRIDGE PRIO Set port priority" \
- "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
- "\n stp BRIDGE [1/yes/on|0/no/off] STP on/off" \
- ) \
-
#define busybox_notes_usage \
"Hello world!\n"
-#define chat_trivial_usage \
- "EXPECT [SEND [EXPECT [SEND...]]]"
-#define chat_full_usage "\n\n" \
- "Useful for interacting with a modem connected to stdin/stdout.\n" \
- "A script consists of one or more \"expect-send\" pairs of strings,\n" \
- "each pair is a pair of arguments. Example:\n" \
- "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \
-
-#define chcon_trivial_usage \
- "[OPTIONS] CONTEXT FILE..." \
- "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \
- IF_FEATURE_CHCON_LONG_OPTIONS( \
- "\n chcon [OPTIONS] --reference=RFILE FILE..." \
- )
-#define chcon_full_usage "\n\n" \
- "Change the security context of each FILE to CONTEXT\n" \
- IF_FEATURE_CHCON_LONG_OPTIONS( \
- "\n -v,--verbose Verbose" \
- "\n -c,--changes Report changes made" \
- "\n -h,--no-dereference Affect symlinks instead of their targets" \
- "\n -f,--silent,--quiet Suppress most error messages" \
- "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
- "\n -u,--user=USER Set user/role/type/range in the target" \
- "\n -r,--role=ROLE security context" \
- "\n -t,--type=TYPE" \
- "\n -l,--range=RANGE" \
- "\n -R,--recursive Recurse" \
- ) \
- IF_NOT_FEATURE_CHCON_LONG_OPTIONS( \
- "\n -v Verbose" \
- "\n -c Report changes made" \
- "\n -h Affect symlinks instead of their targets" \
- "\n -f Suppress most error messages" \
- "\n -u USER Set user/role/type/range in the target security context" \
- "\n -r ROLE" \
- "\n -t TYPE" \
- "\n -l RNG" \
- "\n -R Recurse" \
- )
-
-#define chpst_trivial_usage \
- "[-vP012] [-u USER[:GRP]] [-U USER[:GRP]] [-e DIR]\n" \
- " [-/ DIR] [-n NICE] [-m BYTES] [-d BYTES] [-o N]\n" \
- " [-p N] [-f BYTES] [-c BYTES] PROG ARGS"
-#define chpst_full_usage "\n\n" \
- "Change the process state, run PROG\n" \
- "\nOptions:" \
- "\n -u USER[:GRP] Set uid and gid" \
- "\n -U USER[:GRP] Set $UID and $GID in environment" \
- "\n -e DIR Set environment variables as specified by files" \
- "\n in DIR: file=1st_line_of_file" \
- "\n -/ DIR Chroot to DIR" \
- "\n -n NICE Add NICE to nice value" \
- "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES" \
- "\n -d BYTES Limit data segment" \
- "\n -o N Limit number of open files per process" \
- "\n -p N Limit number of processes per uid" \
- "\n -f BYTES Limit output file sizes" \
- "\n -c BYTES Limit core file size" \
- "\n -v Verbose" \
- "\n -P Create new process group" \
- "\n -0 Close stdin" \
- "\n -1 Close stdout" \
- "\n -2 Close stderr" \
-
-#define setuidgid_trivial_usage \
- "USER PROG ARGS"
-#define setuidgid_full_usage "\n\n" \
- "Set uid and gid to USER's uid and gid, drop supplementary group ids,\n" \
- "run PROG"
-#define envuidgid_trivial_usage \
- "USER PROG ARGS"
-#define envuidgid_full_usage "\n\n" \
- "Set $UID to USER's uid and $GID to USER's gid, run PROG"
-#define envdir_trivial_usage \
- "DIR PROG ARGS"
-#define envdir_full_usage "\n\n" \
- "Set various environment variables as specified by files\n" \
- "in the directory DIR, run PROG"
-#define softlimit_trivial_usage \
- "[-a BYTES] [-m BYTES] [-d BYTES] [-s BYTES] [-l BYTES]\n" \
- " [-f BYTES] [-c BYTES] [-r BYTES] [-o N] [-p N] [-t N]\n" \
- " PROG ARGS"
-#define softlimit_full_usage "\n\n" \
- "Set soft resource limits, then run PROG\n" \
- "\nOptions:" \
- "\n -a BYTES Limit total size of all segments" \
- "\n -m BYTES Same as -d BYTES -s BYTES -l BYTES -a BYTES" \
- "\n -d BYTES Limit data segment" \
- "\n -s BYTES Limit stack segment" \
- "\n -l BYTES Limit locked memory size" \
- "\n -o N Limit number of open files per process" \
- "\n -p N Limit number of processes per uid" \
- "\nOptions controlling file sizes:" \
- "\n -f BYTES Limit output file sizes" \
- "\n -c BYTES Limit core file size" \
- "\nEfficiency opts:" \
- "\n -r BYTES Limit resident set size" \
- "\n -t N Limit CPU time, process receives" \
- "\n a SIGXCPU after N seconds" \
-
-#define bbconfig_trivial_usage \
- ""
-#define bbconfig_full_usage "\n\n" \
- "Print the config file used by busybox build"
-
-#define chrt_trivial_usage \
- "[-prfom] [PRIO] [PID | PROG ARGS]"
-#define chrt_full_usage "\n\n" \
- "Change scheduling priority and class for a process\n" \
- "\nOptions:" \
- "\n -p Operate on PID" \
- "\n -r Set SCHED_RR class" \
- "\n -f Set SCHED_FIFO class" \
- "\n -o Set SCHED_OTHER class" \
- "\n -m Show min/max priorities" \
-
-#define chrt_example_usage \
- "$ chrt -r 4 sleep 900; x=$!\n" \
- "$ chrt -f -p 3 $x\n" \
- "You need CAP_SYS_NICE privileges to set scheduling attributes of a process"
-
-#define renice_trivial_usage \
- "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
-#define renice_full_usage "\n\n" \
- "Change scheduling priority for a running process\n" \
- "\nOptions:" \
- "\n -n Adjust current nice value (smaller is faster)" \
- "\n -p Process id(s) (default)" \
- "\n -g Process group id(s)" \
- "\n -u Process user name(s) and/or id(s)" \
-
-#define ionice_trivial_usage \
- "[-c 1-3] [-n 0-7] [-p PID] [PROG]"
-#define ionice_full_usage "\n\n" \
- "Change I/O priority and class\n" \
- "\nOptions:" \
- "\n -c Class. 1:realtime 2:best-effort 3:idle" \
- "\n -n Priority" \
-
-#define crond_trivial_usage \
- "-fbS -l N " IF_FEATURE_CROND_D("-d N ") "-L LOGFILE -c DIR"
-#define crond_full_usage "\n\n" \
- " -f Foreground" \
- "\n -b Background (default)" \
- "\n -S Log to syslog (default)" \
- "\n -l Set log level. 0 is the most verbose, default 8" \
- IF_FEATURE_CROND_D( \
- "\n -d Set log level, log to stderr" \
- ) \
- "\n -L Log to file" \
- "\n -c Working dir" \
-
-#define crontab_trivial_usage \
- "[-c DIR] [-u USER] [-ler]|[FILE]"
-#define crontab_full_usage "\n\n" \
- " -c Crontab directory" \
- "\n -u User" \
- "\n -l List crontab" \
- "\n -e Edit crontab" \
- "\n -r Delete crontab" \
- "\n FILE Replace crontab by FILE ('-': stdin)" \
-
-#define devmem_trivial_usage \
- "ADDRESS [WIDTH [VALUE]]"
-
-#define devmem_full_usage "\n\n" \
- "Read/write from physical address\n" \
- "\n ADDRESS Address to act upon" \
- "\n WIDTH Width (8/16/...)" \
- "\n VALUE Data to be written" \
-
-#define devfsd_trivial_usage \
- "mntpnt [-v]" IF_DEVFSD_FG_NP("[-fg][-np]")
-#define devfsd_full_usage "\n\n" \
- "Manage devfs permissions and old device name symlinks\n" \
- "\nOptions:" \
- "\n mntpnt The mount point where devfs is mounted" \
- "\n -v Print the protocol version numbers for devfsd" \
- "\n and the kernel-side protocol version and exit" \
- IF_DEVFSD_FG_NP( \
- "\n -fg Run in foreground" \
- "\n -np Exit after parsing the configuration file" \
- "\n and processing synthetic REGISTER events," \
- "\n don't poll for events" \
- )
-
-#define dhcprelay_trivial_usage \
- "CLIENT_IFACE[,CLIENT_IFACE2]... SERVER_IFACE [SERVER_IP]"
-#define dhcprelay_full_usage "\n\n" \
- "Relay DHCP requests between clients and server" \
-
-#define dmesg_trivial_usage \
- "[-c] [-n LEVEL] [-s SIZE]"
-#define dmesg_full_usage "\n\n" \
- "Print or control the kernel ring buffer\n" \
- "\nOptions:" \
- "\n -c Clear ring buffer after printing" \
- "\n -n LEVEL Set console logging level" \
- "\n -s SIZE Buffer size" \
-
-#define dnsd_trivial_usage \
- "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
-#define dnsd_full_usage "\n\n" \
- "Small static DNS server daemon\n" \
- "\nOptions:" \
- "\n -c FILE Config file" \
- "\n -t SEC TTL" \
- "\n -p PORT Listen on PORT" \
- "\n -i ADDR Listen on ADDR" \
- "\n -d Daemonize" \
- "\n -v Verbose" \
- "\n -s Send successful replies only. Use this if you want" \
- "\n to use /etc/resolv.conf with two nameserver lines:" \
- "\n nameserver DNSD_SERVER" \
- "\n nameserver NORNAL_DNS_SERVER" \
-
-#define dumpleases_trivial_usage \
- "[-r|-a] [-f LEASEFILE]"
-#define dumpleases_full_usage "\n\n" \
- "Display DHCP leases granted by udhcpd\n" \
- "\nOptions:" \
- IF_LONG_OPTS( \
- "\n -f,--file=FILE Lease file" \
- "\n -r,--remaining Show remaining time" \
- "\n -a,--absolute Show expiration time" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -f FILE Lease file" \
- "\n -r Show remaining time" \
- "\n -a Show expiration time" \
- )
-
-/*
-#define e2fsck_trivial_usage \
- "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \
- "[-I inode_buffer_blocks] [-P process_inode_size] " \
- "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
- "[-E extended-options] device"
-#define e2fsck_full_usage "\n\n" \
- "Check ext2/ext3 file system\n" \
- "\nOptions:" \
- "\n -p Automatic repair (no questions)" \
- "\n -n Make no changes to the filesystem" \
- "\n -y Assume 'yes' to all questions" \
- "\n -c Check for bad blocks and add them to the badblock list" \
- "\n -f Force checking even if filesystem is marked clean" \
- "\n -v Verbose" \
- "\n -b superblock Use alternative superblock" \
- "\n -B blocksize Force blocksize when looking for superblock" \
- "\n -j journal Set location of the external journal" \
- "\n -l file Add to badblocks list" \
- "\n -L file Set badblocks list" \
-*/
-
-#define eject_trivial_usage \
- "[-t] [-T] [DEVICE]"
-#define eject_full_usage "\n\n" \
- "Eject DEVICE or default /dev/cdrom\n" \
- "\nOptions:" \
- IF_FEATURE_EJECT_SCSI( \
- "\n -s SCSI device" \
- ) \
- "\n -t Close tray" \
- "\n -T Open/close tray (toggle)" \
-
-#define ether_wake_trivial_usage \
- "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
-#define ether_wake_full_usage "\n\n" \
- "Send a magic packet to wake up sleeping machines.\n" \
- "MAC must be a station address (00:11:22:33:44:55) or\n" \
- "a hostname with a known 'ethers' entry.\n" \
- "\nOptions:" \
- "\n -b Send wake-up packet to the broadcast address" \
- "\n -i iface Interface to use (default eth0)" \
- "\n -p pass Append four or six byte password PW to the packet" \
-
-#define fakeidentd_trivial_usage \
- "[-fiw] [-b ADDR] [STRING]"
-#define fakeidentd_full_usage "\n\n" \
- "Provide fake ident (auth) service\n" \
- "\nOptions:" \
- "\n -f Run in foreground" \
- "\n -i Inetd mode" \
- "\n -w Inetd 'wait' mode" \
- "\n -b ADDR Bind to specified address" \
- "\n STRING Ident answer string (default: nobody)" \
-
-#define fbsplash_trivial_usage \
- "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]"
-#define fbsplash_full_usage "\n\n" \
- "Options:" \
- "\n -s Image" \
- "\n -c Hide cursor" \
- "\n -d Framebuffer device (default /dev/fb0)" \
- "\n -i Config file (var=value):" \
- "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \
- "\n BAR_R,BAR_G,BAR_B" \
- "\n -f Control pipe (else exit after drawing image)" \
- "\n commands: 'NN' (% for progress bar) or 'exit'" \
-
-#define fbset_trivial_usage \
- "[OPTIONS] [MODE]"
-#define fbset_full_usage "\n\n" \
- "Show and modify frame buffer settings"
-
-#define fbset_example_usage \
- "$ fbset\n" \
- "mode \"1024x768-76\"\n" \
- " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \
- " geometry 1024 768 1024 768 16\n" \
- " timings 12714 128 32 16 4 128 4\n" \
- " accel false\n" \
- " rgba 5/11,6/5,5/0,0/0\n" \
- "endmode\n"
-
-#define fdflush_trivial_usage \
- "DEVICE"
-#define fdflush_full_usage "\n\n" \
- "Force floppy disk drive to detect disk change"
-
-#define fdformat_trivial_usage \
- "[-n] DEVICE"
-#define fdformat_full_usage "\n\n" \
- "Format floppy disk\n" \
- "\nOptions:" \
- "\n -n Don't verify after format" \
-
-/* Looks like someone forgot to add this to config system */
-#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
-# define ENABLE_FEATURE_FDISK_BLKSIZE 0
-# define IF_FEATURE_FDISK_BLKSIZE(a)
-#endif
-
-#define fdisk_trivial_usage \
- "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " \
- "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK"
-#define fdisk_full_usage "\n\n" \
- "Change partition table\n" \
- "\nOptions:" \
- "\n -u Start and End are in sectors (instead of cylinders)" \
- "\n -l Show partition table for each DISK, then exit" \
- IF_FEATURE_FDISK_BLKSIZE( \
- "\n -s Show partition sizes in kb for each DISK, then exit" \
- ) \
- "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \
- "\n -C CYLINDERS Set number of cylinders/heads/sectors" \
- "\n -H HEADS" \
- "\n -S SECTORS" \
-
-#define findfs_trivial_usage \
- "LABEL=label or UUID=uuid"
-#define findfs_full_usage "\n\n" \
- "Find a filesystem device based on a label or UUID"
-#define findfs_example_usage \
- "$ findfs LABEL=MyDevice"
-
-#define flash_lock_trivial_usage \
- "MTD_DEVICE OFFSET SECTORS"
-#define flash_lock_full_usage "\n\n" \
- "Lock part or all of an MTD device. If SECTORS is -1, then all sectors\n" \
- "will be locked, regardless of the value of OFFSET"
-
-#define flash_unlock_trivial_usage \
- "MTD_DEVICE"
-#define flash_unlock_full_usage "\n\n" \
- "Unlock an MTD device"
-
-#define flash_eraseall_trivial_usage \
- "[-jq] MTD_DEVICE"
-#define flash_eraseall_full_usage "\n\n" \
- "Erase an MTD device\n" \
- "\nOptions:" \
- "\n -j Format the device for jffs2" \
- "\n -q Don't display progress messages" \
-
-#define flashcp_trivial_usage \
- "-v FILE MTD_DEVICE"
-#define flashcp_full_usage "\n\n" \
- "Copy an image to MTD device\n" \
- "\nOptions:" \
- "\n -v Verbose" \
-
-#define flock_trivial_usage \
- "[-sxun] FD|{FILE [-c] PROG ARGS}"
-#define flock_full_usage "\n\n" \
- "[Un]lock file descriptor, or lock FILE, run PROG\n" \
- "\nOptions:" \
- "\n -s Shared lock" \
- "\n -x Exclusive lock (default)" \
- "\n -u Unlock FD" \
- "\n -n Fail rather than wait" \
-
-#define free_trivial_usage \
- "" IF_DESKTOP("[-b/k/m/g]")
-#define free_full_usage "\n\n" \
- "Display the amount of free and used system memory"
-#define free_example_usage \
- "$ free\n" \
- " total used free shared buffers\n" \
- " Mem: 257628 248724 8904 59644 93124\n" \
- " Swap: 128516 8404 120112\n" \
- "Total: 386144 257128 129016\n" \
-
-#define freeramdisk_trivial_usage \
- "DEVICE"
-#define freeramdisk_full_usage "\n\n" \
- "Free all memory used by the specified ramdisk"
-#define freeramdisk_example_usage \
- "$ freeramdisk /dev/ram2\n"
-
-#define fsck_minix_trivial_usage \
- "[-larvsmf] BLOCKDEV"
-#define fsck_minix_full_usage "\n\n" \
- "Check MINIX filesystem\n" \
- "\nOptions:" \
- "\n -l List all filenames" \
- "\n -r Perform interactive repairs" \
- "\n -a Perform automatic repairs" \
- "\n -v Verbose" \
- "\n -s Output superblock information" \
- "\n -m Show \"mode not cleared\" warnings" \
- "\n -f Force file system check" \
-
-#define ftpget_trivial_usage \
- "[OPTIONS] HOST [LOCAL_FILE] REMOTE_FILE"
-#define ftpget_full_usage "\n\n" \
- "Retrieve a remote file via FTP\n" \
- "\nOptions:" \
- IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
- "\n -c,--continue Continue previous transfer" \
- "\n -v,--verbose Verbose" \
- "\n -u,--username Username" \
- "\n -p,--password Password" \
- "\n -P,--port Port number" \
- ) \
- IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
- "\n -c Continue previous transfer" \
- "\n -v Verbose" \
- "\n -u Username" \
- "\n -p Password" \
- "\n -P Port number" \
- )
-
-#define ftpput_trivial_usage \
- "[OPTIONS] HOST [REMOTE_FILE] LOCAL_FILE"
-#define ftpput_full_usage "\n\n" \
- "Store a local file on a remote machine via FTP\n" \
- "\nOptions:" \
- IF_FEATURE_FTPGETPUT_LONG_OPTIONS( \
- "\n -v,--verbose Verbose" \
- "\n -u,--username Username" \
- "\n -p,--password Password" \
- "\n -P,--port Port number" \
- ) \
- IF_NOT_FEATURE_FTPGETPUT_LONG_OPTIONS( \
- "\n -v Verbose" \
- "\n -u Username" \
- "\n -p Password" \
- "\n -P Port number" \
- )
-
-#define fuser_trivial_usage \
- "[OPTIONS] FILE or PORT/PROTO"
-#define fuser_full_usage "\n\n" \
- "Find processes which use FILEs or PORTs\n" \
- "\nOptions:" \
- "\n -m Find processes which use same fs as FILEs" \
- "\n -4,-6 Search only IPv4/IPv6 space" \
- "\n -s Don't display PIDs" \
- "\n -k Kill found processes" \
- "\n -SIGNAL Signal to send (default: KILL)" \
-
-#define getenforce_trivial_usage NOUSAGE_STR
-#define getenforce_full_usage ""
-
-#define getopt_trivial_usage \
- "[OPTIONS]"
-#define getopt_full_usage "\n\n" \
- "Options:" \
- IF_LONG_OPTS( \
- "\n -a,--alternative Allow long options starting with single -" \
- "\n -l,--longoptions=longopts Long options to be recognized" \
- "\n -n,--name=progname The name under which errors are reported" \
- "\n -o,--options=optstring Short options to be recognized" \
- "\n -q,--quiet Disable error reporting by getopt(3)" \
- "\n -Q,--quiet-output No normal output" \
- "\n -s,--shell=shell Set shell quoting conventions" \
- "\n -T,--test Test for getopt(1) version" \
- "\n -u,--unquoted Don't quote the output" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -a Allow long options starting with single -" \
- "\n -l longopts Long options to be recognized" \
- "\n -n progname The name under which errors are reported" \
- "\n -o optstring Short options to be recognized" \
- "\n -q Disable error reporting by getopt(3)" \
- "\n -Q No normal output" \
- "\n -s shell Set shell quoting conventions" \
- "\n -T Test for getopt(1) version" \
- "\n -u Don't quote the output" \
- )
-#define getopt_example_usage \
- "$ cat getopt.test\n" \
- "#!/bin/sh\n" \
- "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \
- " -n 'example.busybox' -- \"$@\"`\n" \
- "if [ $? != 0 ]; then exit 1; fi\n" \
- "eval set -- \"$GETOPT\"\n" \
- "while true; do\n" \
- " case $1 in\n" \
- " -a|--a-long) echo \"Option a\"; shift;;\n" \
- " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \
- " -c|--c-long)\n" \
- " case \"$2\" in\n" \
- " \"\") echo \"Option c, no argument\"; shift 2;;\n" \
- " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \
- " esac;;\n" \
- " --) shift; break;;\n" \
- " *) echo \"Internal error!\"; exit 1;;\n" \
- " esac\n" \
- "done\n"
-
-#define getsebool_trivial_usage \
- "-a or getsebool boolean..."
-#define getsebool_full_usage "\n\n" \
- " -a Show all selinux booleans"
-
-#define hdparm_trivial_usage \
- "[OPTIONS] [DEVICE]"
-#define hdparm_full_usage "\n\n" \
- "Options:" \
- "\n -a Get/set fs readahead" \
- "\n -A Set drive read-lookahead flag (0/1)" \
- "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
- "\n -B Set Advanced Power Management setting (1-255)" \
- "\n -c Get/set IDE 32-bit IO setting" \
- "\n -C Check IDE power mode status" \
- IF_FEATURE_HDPARM_HDIO_GETSET_DMA( \
- "\n -d Get/set using_dma flag") \
- "\n -D Enable/disable drive defect-mgmt" \
- "\n -f Flush buffer cache for device on exit" \
- "\n -g Display drive geometry" \
- "\n -h Display terse usage information" \
- IF_FEATURE_HDPARM_GET_IDENTITY( \
- "\n -i Display drive identification") \
- IF_FEATURE_HDPARM_GET_IDENTITY( \
- "\n -I Detailed/current information directly from drive") \
- "\n -k Get/set keep_settings_over_reset flag (0/1)" \
- "\n -K Set drive keep_features_over_reset flag (0/1)" \
- "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
- "\n -m Get/set multiple sector count" \
- "\n -n Get/set ignore-write-errors flag (0/1)" \
- "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
- "\n -P Set drive prefetch count" \
-/* "\n -q Change next setting quietly" - not supported ib bbox */ \
- "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
- "\n -r Get/set readonly flag (DANGEROUS to set)" \
- IF_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
- "\n -R Register an IDE interface (DANGEROUS)") \
- "\n -S Set standby (spindown) timeout" \
- "\n -t Perform device read timings" \
- "\n -T Perform cache read timings" \
- "\n -u Get/set unmaskirq flag (0/1)" \
- IF_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
- "\n -U Unregister an IDE interface (DANGEROUS)") \
- "\n -v Defaults; same as -mcudkrag for IDE drives" \
- "\n -V Display program version and exit immediately" \
- IF_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
- "\n -w Perform device reset (DANGEROUS)") \
- "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
- IF_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
- "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
- "\n -X Set IDE xfer mode (DANGEROUS)" \
- "\n -y Put IDE drive in standby mode" \
- "\n -Y Put IDE drive to sleep" \
- "\n -Z Disable Seagate auto-powersaving mode" \
- "\n -z Reread partition table" \
-
-#define hexdump_trivial_usage \
- "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
-#define hexdump_full_usage "\n\n" \
- "Display FILEs (or stdin) in a user specified format\n" \
- "\nOptions:" \
- "\n -b One-byte octal display" \
- "\n -c One-byte character display" \
- "\n -C Canonical hex+ASCII, 16 bytes per line" \
- "\n -d Two-byte decimal display" \
- "\n -e FORMAT_STRING" \
- "\n -f FORMAT_FILE" \
- "\n -n LENGTH Interpret only LENGTH bytes of input" \
- "\n -o Two-byte octal display" \
- "\n -s OFFSET Skip OFFSET bytes" \
- "\n -v Display all input data" \
- "\n -x Two-byte hexadecimal display" \
- IF_FEATURE_HEXDUMP_REVERSE( \
- "\n -R Reverse of 'hexdump -Cv'") \
-
-#define hd_trivial_usage \
- "FILE..."
-#define hd_full_usage "\n\n" \
- "hd is an alias for hexdump -C"
-
-#define hostname_trivial_usage \
- "[OPTIONS] [HOSTNAME | -F FILE]"
-#define hostname_full_usage "\n\n" \
- "Get or set hostname or DNS domain name\n" \
- "\nOptions:" \
- "\n -s Short" \
- "\n -i Addresses for the hostname" \
- "\n -d DNS domain name" \
- "\n -f Fully qualified domain name" \
- "\n -F FILE Use FILE's content as hostname" \
-
-#define hostname_example_usage \
- "$ hostname\n" \
- "sage\n"
-
-#define dnsdomainname_trivial_usage NOUSAGE_STR
-#define dnsdomainname_full_usage ""
-
-#define httpd_trivial_usage \
- "[-ifv[v]]" \
- " [-c CONFFILE]" \
- " [-p [IP:]PORT]" \
- IF_FEATURE_HTTPD_SETUID(" [-u USER[:GRP]]") \
- IF_FEATURE_HTTPD_BASIC_AUTH(" [-r REALM]") \
- " [-h HOME]\n" \
- "or httpd -d/-e" IF_FEATURE_HTTPD_AUTH_MD5("/-m") " STRING"
-#define httpd_full_usage "\n\n" \
- "Listen for incoming HTTP requests\n" \
- "\nOptions:" \
- "\n -i Inetd mode" \
- "\n -f Don't daemonize" \
- "\n -v[v] Verbose" \
- "\n -p [IP:]PORT Bind to IP:PORT (default *:80)" \
- IF_FEATURE_HTTPD_SETUID( \
- "\n -u USER[:GRP] Set uid/gid after binding to port") \
- IF_FEATURE_HTTPD_BASIC_AUTH( \
- "\n -r REALM Authentication Realm for Basic Authentication") \
- "\n -h HOME Home directory (default .)" \
- "\n -c FILE Configuration file (default {/etc,HOME}/httpd.conf)" \
- IF_FEATURE_HTTPD_AUTH_MD5( \
- "\n -m STRING MD5 crypt STRING") \
- "\n -e STRING HTML encode STRING" \
- "\n -d STRING URL decode STRING" \
-
-#define ifconfig_trivial_usage \
- IF_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
-#define ifconfig_full_usage "\n\n" \
- "Configure a network interface\n" \
- "\nOptions:" \
- "\n" \
- IF_FEATURE_IPV6( \
- " [add ADDRESS[/PREFIXLEN]]\n") \
- IF_FEATURE_IPV6( \
- " [del ADDRESS[/PREFIXLEN]]\n") \
- " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \
- " [netmask ADDRESS] [dstaddr ADDRESS]\n" \
- IF_FEATURE_IFCONFIG_SLIP( \
- " [outfill NN] [keepalive NN]\n") \
- " " IF_FEATURE_IFCONFIG_HW("[hw ether" IF_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \
- " [[-]trailers] [[-]arp] [[-]allmulti]\n" \
- " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \
- IF_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \
- " [mem_start NN] [io_addr NN] [irq NN]\n") \
- " [up|down] ..."
-
-#define ifenslave_trivial_usage \
- "[-cdf] MASTER_IFACE SLAVE_IFACE..."
-#define ifenslave_full_usage "\n\n" \
- "Configure network interfaces for parallel routing\n" \
- "\nOptions:" \
- "\n -c,--change-active Change active slave" \
- "\n -d,--detach Remove slave interface from bonding device" \
- "\n -f,--force Force, even if interface is not Ethernet" \
-/* "\n -r,--receive-slave Create a receive-only slave" */
-
-#define ifenslave_example_usage \
- "To create a bond device, simply follow these three steps:\n" \
- "- ensure that the required drivers are properly loaded:\n" \
- " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \
- "- assign an IP address to the bond device:\n" \
- " # ifconfig bond0 <addr> netmask <mask> broadcast <bcast>\n" \
- "- attach all the interfaces you need to the bond device:\n" \
- " # ifenslave bond0 eth0 eth1 eth2\n" \
- " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \
- " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \
- " To detach a dead interface without setting the bond device down:\n" \
- " # ifenslave -d bond0 eth1\n\n" \
- " To set the bond device down and automatically release all the slaves:\n" \
- " # ifconfig bond0 down\n\n" \
- " To change active slave:\n" \
- " # ifenslave -c bond0 eth0\n" \
-
-#define ifplugd_trivial_usage \
- "[OPTIONS]"
-#define ifplugd_full_usage "\n\n" \
- "Network interface plug detection daemon\n" \
- "\nOptions:" \
- "\n -n Don't daemonize" \
- "\n -s Don't log to syslog" \
- "\n -i IFACE Interface" \
- "\n -f/-F Treat link detection error as link down/link up" \
- "\n (otherwise exit on error)" \
- "\n -a Don't up interface at each link probe" \
- "\n -M Monitor creation/destruction of interface" \
- "\n (otherwise it must exist)" \
- "\n -r PROG Script to run" \
- "\n -x ARG Extra argument for script" \
- "\n -I Don't exit on nonzero exit code from script" \
- "\n -p Don't run script on daemon startup" \
- "\n -q Don't run script on daemon quit" \
- "\n -l Run script on startup even if no cable is detected" \
- "\n -t SECS Poll time in seconds" \
- "\n -u SECS Delay before running script after link up" \
- "\n -d SECS Delay after link down" \
- "\n -m MODE API mode (mii, priv, ethtool, wlan, iff, auto)" \
- "\n -k Kill running daemon" \
-
-#define ifup_trivial_usage \
- "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
-#define ifup_full_usage "\n\n" \
- "Options:" \
- "\n -a De/configure all interfaces automatically" \
- "\n -i FILE Use FILE for interface definitions" \
- "\n -n Print out what would happen, but don't do it" \
- IF_FEATURE_IFUPDOWN_MAPPING( \
- "\n (note: doesn't disable mappings)" \
- "\n -m Don't run any mappings" \
- ) \
- "\n -v Print out what would happen before doing it" \
- "\n -f Force de/configuration" \
-
-#define ifdown_trivial_usage \
- "[-an"IF_FEATURE_IFUPDOWN_MAPPING("m")"vf] [-i FILE] IFACE..."
-#define ifdown_full_usage "\n\n" \
- "Options:" \
- "\n -a De/configure all interfaces automatically" \
- "\n -i FILE Use FILE for interface definitions" \
- "\n -n Print out what would happen, but don't do it" \
- IF_FEATURE_IFUPDOWN_MAPPING( \
- "\n (note: doesn't disable mappings)" \
- "\n -m Don't run any mappings" \
- ) \
- "\n -v Print out what would happen before doing it" \
- "\n -f Force de/configuration" \
-
-#define inetd_trivial_usage \
- "[-fe] [-q N] [-R N] [CONFFILE]"
-#define inetd_full_usage "\n\n" \
- "Listen for network connections and launch programs\n" \
- "\nOptions:" \
- "\n -f Run in foreground" \
- "\n -e Log to stderr" \
- "\n -q N Socket listen queue (default: 128)" \
- "\n -R N Pause services after N connects/min" \
- "\n (default: 0 - disabled)" \
-
-#define inotifyd_trivial_usage \
- "PROG FILE1[:MASK]..."
-#define inotifyd_full_usage "\n\n" \
- "Run PROG on filesystem changes." \
- "\nWhen a filesystem event matching MASK occurs on FILEn," \
- "\nPROG ACTUAL_EVENTS FILEn [SUBFILE] is run." \
- "\nEvents:" \
- "\n a File is accessed" \
- "\n c File is modified" \
- "\n e Metadata changed" \
- "\n w Writable file is closed" \
- "\n 0 Unwritable file is closed" \
- "\n r File is opened" \
- "\n D File is deleted" \
- "\n M File is moved" \
- "\n u Backing fs is unmounted" \
- "\n o Event queue overflowed" \
- "\n x File can't be watched anymore" \
- "\nIf watching a directory:" \
- "\n m Subfile is moved into dir" \
- "\n y Subfile is moved out of dir" \
- "\n n Subfile is created" \
- "\n d Subfile is deleted" \
- "\n" \
- "\ninotifyd waits for PROG to exit." \
- "\nWhen x event happens for all FILEs, inotifyd exits." \
-
-/* would need to make the " | " optional depending on more than one selected: */
-#define ip_trivial_usage \
- "[OPTIONS] {" \
- IF_FEATURE_IP_ADDRESS("address | ") \
- IF_FEATURE_IP_ROUTE("route | ") \
- IF_FEATURE_IP_LINK("link | ") \
- IF_FEATURE_IP_TUNNEL("tunnel | ") \
- IF_FEATURE_IP_RULE("rule") \
- "} {COMMAND}"
-#define ip_full_usage "\n\n" \
- "ip [OPTIONS] OBJECT {COMMAND}\n" \
- "where OBJECT := {" \
- IF_FEATURE_IP_ADDRESS("address | ") \
- IF_FEATURE_IP_ROUTE("route | ") \
- IF_FEATURE_IP_LINK("link | ") \
- IF_FEATURE_IP_TUNNEL("tunnel | ") \
- IF_FEATURE_IP_RULE("rule") \
- "}\n" \
- "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
-
-#define ipaddr_trivial_usage \
- "{ {add|del} IFADDR dev STRING | {show|flush}\n" \
- " [dev STRING] [to PREFIX] }"
-#define ipaddr_full_usage "\n\n" \
- "ipaddr {add|delete} IFADDR dev STRING\n" \
- "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \
- " [to PREFIX] [label PATTERN]\n" \
- " IFADDR := PREFIX | ADDR peer PREFIX\n" \
- " [broadcast ADDR] [anycast ADDR]\n" \
- " [label STRING] [scope SCOPE-ID]\n" \
- " SCOPE-ID := [host | link | global | NUMBER]" \
-
-#define ipcalc_trivial_usage \
- "[OPTIONS] ADDRESS[[/]NETMASK] [NETMASK]"
-#define ipcalc_full_usage "\n\n" \
- "Calculate IP network settings from a IP address\n" \
- "\nOptions:" \
- IF_FEATURE_IPCALC_LONG_OPTIONS( \
- "\n -b,--broadcast Display calculated broadcast address" \
- "\n -n,--network Display calculated network address" \
- "\n -m,--netmask Display default netmask for IP" \
- IF_FEATURE_IPCALC_FANCY( \
- "\n -p,--prefix Display the prefix for IP/NETMASK" \
- "\n -h,--hostname Display first resolved host name" \
- "\n -s,--silent Don't ever display error messages" \
- ) \
- ) \
- IF_NOT_FEATURE_IPCALC_LONG_OPTIONS( \
- "\n -b Display calculated broadcast address" \
- "\n -n Display calculated network address" \
- "\n -m Display default netmask for IP" \
- IF_FEATURE_IPCALC_FANCY( \
- "\n -p Display the prefix for IP/NETMASK" \
- "\n -h Display first resolved host name" \
- "\n -s Don't ever display error messages" \
- ) \
- )
-
-#define ipcrm_trivial_usage \
- "[-MQS key] [-mqs id]"
-#define ipcrm_full_usage "\n\n" \
- "Upper-case options MQS remove an object by shmkey value.\n" \
- "Lower-case options remove an object by shmid value.\n" \
- "\nOptions:" \
- "\n -mM Remove memory segment after last detach" \
- "\n -qQ Remove message queue" \
- "\n -sS Remove semaphore" \
-
-#define ipcs_trivial_usage \
- "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
-#define ipcs_full_usage "\n\n" \
- " -i Show specific resource" \
- "\nResource specification:" \
- "\n -m Shared memory segments" \
- "\n -q Message queues" \
- "\n -s Semaphore arrays" \
- "\n -a All (default)" \
- "\nOutput format:" \
- "\n -t Time" \
- "\n -c Creator" \
- "\n -p Pid" \
- "\n -l Limits" \
- "\n -u Summary" \
-
-#define iplink_trivial_usage \
- "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
-#define iplink_full_usage "\n\n" \
- "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
- " dynamic { on | off } |\n" \
- " mtu MTU }\n" \
- "iplink show [DEVICE]" \
-
-#define iproute_trivial_usage \
- "{ list | flush | { add | del | change | append |\n" \
- " replace | monitor } ROUTE }"
-#define iproute_full_usage "\n\n" \
- "iproute { list | flush } SELECTOR\n" \
- "iproute get ADDRESS [from ADDRESS iif STRING]\n" \
- " [oif STRING] [tos TOS]\n" \
- "iproute { add | del | change | append | replace | monitor } ROUTE\n" \
- " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
- " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]\n" \
- " [metric METRIC]" \
-
-#define iprule_trivial_usage \
- "{[list | add | del] RULE}"
-#define iprule_full_usage "\n\n" \
- "iprule [list | add | del] SELECTOR ACTION\n" \
- " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \
- " [dev STRING] [pref NUMBER]\n" \
- " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
- " [prohibit | reject | unreachable]\n" \
- " [realms [SRCREALM/]DSTREALM]\n" \
- " TABLE_ID := [local | main | default | NUMBER]" \
-
-#define iptunnel_trivial_usage \
- "{ add | change | del | show } [NAME]\n" \
- " [mode { ipip | gre | sit }]\n" \
- " [remote ADDR] [local ADDR] [ttl TTL]"
-#define iptunnel_full_usage "\n\n" \
- "iptunnel { add | change | del | show } [NAME]\n" \
- " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
- " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
- " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
-
-#define kill_trivial_usage \
- "[-l] [-SIG] PID..."
-#define kill_full_usage "\n\n" \
- "Send a signal (default: TERM) to given PIDs\n" \
- "\nOptions:" \
- "\n -l List all signal names and numbers" \
-/* "\n -s SIG Yet another way of specifying SIG" */ \
-
-#define kill_example_usage \
- "$ ps | grep apache\n" \
- "252 root root S [apache]\n" \
- "263 www-data www-data S [apache]\n" \
- "264 www-data www-data S [apache]\n" \
- "265 www-data www-data S [apache]\n" \
- "266 www-data www-data S [apache]\n" \
- "267 www-data www-data S [apache]\n" \
- "$ kill 252\n"
-
-#define killall_trivial_usage \
- "[-l] [-q] [-SIG] PROCESS_NAME..."
-#define killall_full_usage "\n\n" \
- "Send a signal (default: TERM) to given processes\n" \
- "\nOptions:" \
- "\n -l List all signal names and numbers" \
-/* "\n -s SIG Yet another way of specifying SIG" */ \
- "\n -q Don't complain if no processes were killed" \
-
-#define killall_example_usage \
- "$ killall apache\n"
-
-#define killall5_trivial_usage \
- "[-l] [-SIG] [-o PID]..."
-#define killall5_full_usage "\n\n" \
- "Send a signal (default: TERM) to all processes outside current session\n" \
- "\nOptions:" \
- "\n -l List all signal names and numbers" \
- "\n -o PID Don't signal this PID" \
-/* "\n -s SIG Yet another way of specifying SIG" */ \
-
-#define klogd_trivial_usage \
- "[-c N] [-n]"
-#define klogd_full_usage "\n\n" \
- "Kernel logger\n" \
- "\nOptions:" \
- "\n -c N Only messages with level < N are printed to console" \
- "\n -n Run in foreground" \
-
-#define less_trivial_usage \
- "[-EMNmh~I?] [FILE]..."
-#define less_full_usage "\n\n" \
- "View FILE (or stdin) one screenful at a time\n" \
- "\nOptions:" \
- "\n -E Quit once the end of a file is reached" \
- "\n -M,-m Display status line with line numbers" \
- "\n and percentage through the file" \
- "\n -N Prefix line number to each line" \
- "\n -I Ignore case in all searches" \
- "\n -~ Suppress ~s displayed past the end of the file" \
-
-#define linux32_trivial_usage NOUSAGE_STR
-#define linux32_full_usage ""
-#define linux64_trivial_usage NOUSAGE_STR
-#define linux64_full_usage ""
-
-#define setarch_trivial_usage \
- "personality PROG ARGS"
-#define setarch_full_usage "\n\n" \
- "Personality may be:\n" \
- " linux32 Set 32bit uname emulation\n" \
- " linux64 Set 64bit uname emulation" \
-
-#define load_policy_trivial_usage NOUSAGE_STR
-#define load_policy_full_usage ""
-
-#define logger_trivial_usage \
- "[OPTIONS] [MESSAGE]"
-#define logger_full_usage "\n\n" \
- "Write MESSAGE (or stdin) to syslog\n" \
- "\nOptions:" \
- "\n -s Log to stderr as well as the system log" \
- "\n -t TAG Log using the specified tag (defaults to user name)" \
- "\n -p PRIO Priority (numeric or facility.level pair)" \
-
-#define logger_example_usage \
- "$ logger \"hello\"\n"
-
-#define logread_trivial_usage \
- "[-f]"
-#define logread_full_usage "\n\n" \
- "Show messages in syslogd's circular buffer\n" \
- "\nOptions:" \
- "\n -f Output data as log grows" \
-
-#define losetup_trivial_usage \
- "[-o OFS] LOOPDEV FILE - associate loop devices\n" \
- " losetup -d LOOPDEV - disassociate\n" \
- " losetup [-f] - show"
-#define losetup_full_usage "\n\n" \
- "Options:" \
- "\n -o OFS Start OFS bytes into FILE" \
- "\n -f Show first free loop device" \
-
-#define losetup_notes_usage \
- "No arguments will display all current associations.\n" \
- "One argument (losetup /dev/loop1) will display the current association\n" \
- "(if any), or disassociate it (with -d). The display shows the offset\n" \
- "and filename of the file the loop device is currently bound to.\n\n" \
- "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \
- "with an optional offset (-o 12345). Encryption is not yet supported.\n" \
- "losetup -f will show the first loop free loop device\n\n"
-
-#define lpd_trivial_usage \
- "SPOOLDIR [HELPER [ARGS]]"
-#define lpd_full_usage "\n\n" \
- "SPOOLDIR must contain (symlinks to) device nodes or directories" \
- "\nwith names matching print queue names. In the first case, jobs are" \
- "\nsent directly to the device. Otherwise each job is stored in queue" \
- "\ndirectory and HELPER program is called. Name of file to print" \
- "\nis passed in $DATAFILE variable." \
- "\nExample:" \
- "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" \
-
-#define lpq_trivial_usage \
- "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID]... [-fs]"
-#define lpq_full_usage "\n\n" \
- "Options:" \
- "\n -P lp service to connect to (else uses $PRINTER)" \
- "\n -d Delete jobs" \
- "\n -f Force any waiting job to be printed" \
- "\n -s Short display" \
-
-#define lpr_trivial_usage \
- "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE]..."
-/* -C CLASS exists too, not shown.
- * CLASS is supposed to be printed on banner page, if one is requested */
-#define lpr_full_usage "\n\n" \
- "Options:" \
- "\n -P lp service to connect to (else uses $PRINTER)"\
- "\n -m Send mail on completion" \
- "\n -h Print banner page too" \
- "\n -V Verbose" \
-
-#define lspci_trivial_usage \
- "[-mk]"
-#define lspci_full_usage "\n\n" \
- "List all PCI devices" \
- "\n" \
- "\n -m Parseable output" \
- "\n -k Show driver" \
-
-#define lsusb_trivial_usage NOUSAGE_STR
-#define lsusb_full_usage ""
-
-#if ENABLE_FEATURE_MAKEDEVS_LEAF
-#define makedevs_trivial_usage \
- "NAME TYPE MAJOR MINOR FIRST LAST [s]"
-#define makedevs_full_usage "\n\n" \
- "Create a range of block or character special files" \
- "\n" \
- "\nTYPE is:" \
- "\n b Block device" \
- "\n c Character device" \
- "\n f FIFO, MAJOR and MINOR are ignored" \
- "\n" \
- "\nFIRST..LAST specify numbers appended to NAME." \
- "\nIf 's' is the last argument, the base device is created as well." \
- "\n" \
- "\nExamples:" \
- "\n makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63" \
- "\n makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8"
-#define makedevs_example_usage \
- "# makedevs /dev/ttyS c 4 66 2 63\n" \
- "[creates ttyS2-ttyS63]\n" \
- "# makedevs /dev/hda b 3 0 0 8 s\n" \
- "[creates hda,hda1-hda8]\n"
-#endif
-
-#if ENABLE_FEATURE_MAKEDEVS_TABLE
-#define makedevs_trivial_usage \
- "[-d device_table] rootdir"
-#define makedevs_full_usage "\n\n" \
- "Create a range of special files as specified in a device table.\n" \
- "Device table entries take the form of:\n" \
- "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \
- "Where name is the file name, type can be one of:\n" \
- " f Regular file\n" \
- " d Directory\n" \
- " c Character device\n" \
- " b Block device\n" \
- " p Fifo (named pipe)\n" \
- "uid is the user id for the target file, gid is the group id for the\n" \
- "target file. The rest of the entries (major, minor, etc) apply to\n" \
- "to device special files. A '-' may be used for blank entries."
-#define makedevs_example_usage \
- "For example:\n" \
- "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \
- "/dev d 755 0 0 - - - - -\n" \
- "/dev/console c 666 0 0 5 1 - - -\n" \
- "/dev/null c 666 0 0 1 3 0 0 -\n" \
- "/dev/zero c 666 0 0 1 5 0 0 -\n" \
- "/dev/hda b 640 0 0 3 0 0 0 -\n" \
- "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \
- "Will Produce:\n" \
- "/dev\n" \
- "/dev/console\n" \
- "/dev/null\n" \
- "/dev/zero\n" \
- "/dev/hda\n" \
- "/dev/hda[0-15]\n"
-#endif
-
-#define man_trivial_usage \
- "[-aw] [MANPAGE]..."
-#define man_full_usage "\n\n" \
- "Format and display manual page\n" \
- "\nOptions:" \
- "\n -a Display all pages" \
- "\n -w Show page locations" \
-
-#define matchpathcon_trivial_usage \
- "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
-#define matchpathcon_full_usage "\n\n" \
- " -n Don't display path" \
- "\n -N Don't use translations" \
- "\n -f Use alternate file_context file" \
- "\n -p Use prefix to speed translations" \
- "\n -V Verify file context on disk matches defaults" \
-
-#define mdev_trivial_usage \
- "[-s]"
-#define mdev_full_usage "\n\n" \
- " -s Scan /sys and populate /dev during system boot\n" \
- "\n" \
- "It can be run by kernel as a hotplug helper. To activate it:\n" \
- " echo /sbin/mdev > /proc/sys/kernel/hotplug\n" \
- IF_FEATURE_MDEV_CONF( \
- "It uses /etc/mdev.conf with lines\n" \
- "[-]DEVNAME UID:GID PERM" \
- IF_FEATURE_MDEV_RENAME(" [>|=PATH]") \
- IF_FEATURE_MDEV_EXEC(" [@|$|*PROG]") \
- ) \
-
-#define mdev_notes_usage "" \
- IF_FEATURE_MDEV_CONFIG( \
- "The mdev config file contains lines that look like:\n" \
- " hd[a-z][0-9]* 0:3 660\n\n" \
- "That's device name (with regex match), uid:gid, and permissions.\n\n" \
- IF_FEATURE_MDEV_EXEC( \
- "Optionally, that can be followed (on the same line) by a special character\n" \
- "and a command line to run after creating/before deleting the corresponding\n" \
- "device(s). The environment variable $MDEV indicates the active device node\n" \
- "(which is useful if it's a regex match). For example:\n\n" \
- " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \
- "The special characters are @ (run after creating), $ (run before deleting),\n" \
- "and * (run both after creating and before deleting). The commands run in\n" \
- "the /dev directory, and use system() which calls /bin/sh.\n\n" \
- ) \
- "Config file parsing stops on the first matching line. If no config\n" \
- "entry is matched, devices are created with default 0:0 660. (Make\n" \
- "the last line match .* to override this.)\n\n" \
- )
-
-#define microcom_trivial_usage \
- "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
-#define microcom_full_usage "\n\n" \
- "Copy bytes for stdin to TTY and from TTY to stdout\n" \
- "\nOptions:" \
- "\n -d Wait up to DELAY ms for TTY output before sending every" \
- "\n next byte to it" \
- "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
- "\n -s Set serial line to SPEED" \
- "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
-
-#define mkfs_ext2_trivial_usage \
- "[-Fn] " \
- /* "[-c|-l filename] " */ \
- "[-b BLK_SIZE] " \
- /* "[-f fragment-size] [-g blocks-per-group] " */ \
- "[-i INODE_RATIO] [-I INODE_SIZE] " \
- /* "[-j] [-J journal-options] [-N number-of-inodes] " */ \
- "[-m RESERVED_PERCENT] " \
- /* "[-o creator-os] [-O feature[,...]] [-q] " */ \
- /* "[r fs-revision-level] [-E extended-options] [-v] [-F] " */ \
- "[-L LABEL] " \
- /* "[-M last-mounted-directory] [-S] [-T filesystem-type] " */ \
- "BLOCKDEV [KBYTES]"
-#define mkfs_ext2_full_usage "\n\n" \
- " -b BLK_SIZE Block size, bytes" \
-/* "\n -c Check device for bad blocks" */ \
-/* "\n -E opts Set extended options" */ \
-/* "\n -f size Fragment size in bytes" */ \
- "\n -F Force" \
-/* "\n -g N Number of blocks in a block group" */ \
- "\n -i RATIO Max number of files is filesystem_size / RATIO" \
- "\n -I BYTES Inode size (min 128)" \
-/* "\n -j Create a journal (ext3)" */ \
-/* "\n -J opts Set journal options (size/device)" */ \
-/* "\n -l file Read bad blocks list from file" */ \
- "\n -L LBL Volume label" \
- "\n -m PERCENT Percent of blocks to reserve for admin" \
-/* "\n -M dir Set last mounted directory" */ \
- "\n -n Dry run" \
-/* "\n -N N Number of inodes to create" */ \
-/* "\n -o os Set the 'creator os' field" */ \
-/* "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" */ \
-/* "\n -q Quiet" */ \
-/* "\n -r rev Set filesystem revision" */ \
-/* "\n -S Write superblock and group descriptors only" */ \
-/* "\n -T fs-type Set usage type (news/largefile/largefile4)" */ \
-/* "\n -v Verbose" */ \
-
-#define mkfs_minix_trivial_usage \
- "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
-#define mkfs_minix_full_usage "\n\n" \
- "Make a MINIX filesystem\n" \
- "\nOptions:" \
- "\n -c Check device for bad blocks" \
- "\n -n [14|30] Maximum length of filenames" \
- "\n -i INODES Number of inodes for the filesystem" \
- "\n -l FILE Read bad blocks list from FILE" \
- "\n -v Make version 2 filesystem" \
-
-#define mkfs_reiser_trivial_usage \
- "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
-
-#define mkfs_reiser_full_usage "\n\n" \
- "Make a ReiserFS V3 filesystem\n" \
- "\nOptions:" \
- "\n -f Force" \
- "\n -l LBL Volume label" \
-
-#define mkfs_vfat_trivial_usage \
- "[-v] [-n LABEL] BLOCKDEV [KBYTES]"
-/* Accepted but ignored:
- "[-c] [-C] [-I] [-l bad-block-file] [-b backup-boot-sector] "
- "[-m boot-msg-file] [-i volume-id] "
- "[-s sectors-per-cluster] [-S logical-sector-size] [-f number-of-FATs] "
- "[-h hidden-sectors] [-F fat-size] [-r root-dir-entries] [-R reserved-sectors] "
-*/
-#define mkfs_vfat_full_usage "\n\n" \
- "Make a FAT32 filesystem\n" \
- "\nOptions:" \
-/* "\n -c Check device for bad blocks" */ \
- "\n -v Verbose" \
-/* "\n -I Allow to use entire disk device (e.g. /dev/hda)" */ \
- "\n -n LBL Volume label" \
-
-#define mkswap_trivial_usage \
- "[-L LBL] BLOCKDEV [KBYTES]"
-#define mkswap_full_usage "\n\n" \
- "Prepare BLOCKDEV to be used as swap partition\n" \
- "\nOptions:" \
- "\n -L LBL Label" \
-
-#define more_trivial_usage \
- "[FILE]..."
-#define more_full_usage "\n\n" \
- "View FILE (or stdin) one screenful at a time"
-
-#define more_example_usage \
- "$ dmesg | more\n"
-
-#define mount_trivial_usage \
- "[OPTIONS] [-o OPTS] DEVICE NODE"
-#define mount_full_usage "\n\n" \
- "Mount a filesystem. Filesystem autodetection requires /proc.\n" \
- "\nOptions:" \
- "\n -a Mount all filesystems in fstab" \
- IF_FEATURE_MOUNT_FAKE( \
- IF_FEATURE_MTAB_SUPPORT( \
- "\n -f Update /etc/mtab, but don't mount" \
- ) \
- IF_NOT_FEATURE_MTAB_SUPPORT( \
- "\n -f Dry run" \
- ) \
- ) \
- IF_FEATURE_MOUNT_HELPERS( \
- "\n -i Don't run mount helper" \
- ) \
- IF_FEATURE_MTAB_SUPPORT( \
- "\n -n Don't update /etc/mtab" \
- ) \
- "\n -r Read-only mount" \
- "\n -w Read-write mount (default)" \
- "\n -t FSTYPE Filesystem type" \
- "\n -O OPT Mount only filesystems with option OPT (-a only)" \
- "\n-o OPT:" \
- IF_FEATURE_MOUNT_LOOP( \
- "\n loop Ignored (loop devices are autodetected)" \
- ) \
- IF_FEATURE_MOUNT_FLAGS( \
- "\n [a]sync Writes are [a]synchronous" \
- "\n [no]atime Disable/enable updates to inode access times" \
- "\n [no]diratime Disable/enable atime updates to directories" \
- "\n [no]relatime Disable/enable atime updates relative to modification time" \
- "\n [no]dev (Dis)allow use of special device files" \
- "\n [no]exec (Dis)allow use of executable files" \
- "\n [no]suid (Dis)allow set-user-id-root programs" \
- "\n [r]shared Convert [recursively] to a shared subtree" \
- "\n [r]slave Convert [recursively] to a slave subtree" \
- "\n [r]private Convert [recursively] to a private subtree" \
- "\n [un]bindable Make mount point [un]able to be bind mounted" \
- "\n [r]bind Bind a file or directory [recursively] to another location" \
- "\n move Relocate an existing mount point" \
- ) \
- "\n remount Remount a mounted filesystem, changing flags" \
- "\n ro/rw Same as -r/-w" \
- "\n" \
- "\nThere are filesystem-specific -o flags." \
-
-#define mount_example_usage \
- "$ mount\n" \
- "/dev/hda3 on / type minix (rw)\n" \
- "proc on /proc type proc (rw)\n" \
- "devpts on /dev/pts type devpts (rw)\n" \
- "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \
- "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \
- "$ mount cd_image.iso mydir\n"
-#define mount_notes_usage \
- "Returns 0 for success, number of failed mounts for -a, or errno for one mount."
-
-#define mountpoint_trivial_usage \
- "[-q] <[-dn] DIR | -x DEVICE>"
-#define mountpoint_full_usage "\n\n" \
- "Check if the directory is a mountpoint\n" \
- "\nOptions:" \
- "\n -q Quiet" \
- "\n -d Print major/minor device number of the filesystem" \
- "\n -n Print device name of the filesystem" \
- "\n -x Print major/minor device number of the blockdevice" \
-
-#define mountpoint_example_usage \
- "$ mountpoint /proc\n" \
- "/proc is not a mountpoint\n" \
- "$ mountpoint /sys\n" \
- "/sys is a mountpoint\n"
-
-#define mt_trivial_usage \
- "[-f device] opcode value"
-#define mt_full_usage "\n\n" \
- "Control magnetic tape drive operation\n" \
- "\n" \
- "Available Opcodes:\n" \
- "\n" \
- "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
- "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
- "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
- "setpart tell unload unlock weof wset" \
-
-#define nslookup_trivial_usage \
- "[HOST] [SERVER]"
-#define nslookup_full_usage "\n\n" \
- "Query the nameserver for the IP address of the given HOST\n" \
- "optionally using a specified DNS server"
-#define nslookup_example_usage \
- "$ nslookup localhost\n" \
- "Server: default\n" \
- "Address: default\n" \
- "\n" \
- "Name: debian\n" \
- "Address: 127.0.0.1\n"
-
-#define ntpd_trivial_usage \
- "[-dnqNw"IF_FEATURE_NTPD_SERVER("l")"] [-S PROG] [-p PEER]..."
-#define ntpd_full_usage "\n\n" \
- "NTP client/server\n" \
- "\nOptions:" \
- "\n -d Verbose" \
- "\n -n Do not daemonize" \
- "\n -q Quit after clock is set" \
- "\n -N Run at high priority" \
- "\n -w Do not set time (only query peers), implies -n" \
- IF_FEATURE_NTPD_SERVER( \
- "\n -l Run as server on port 123" \
- ) \
- "\n -S PROG Run PROG after stepping time, stratum change, and every 11 mins" \
- "\n -p PEER Obtain time from PEER (may be repeated)" \
-
-/*
-#define parse_trivial_usage \
- "[-n MAXTOKENS] [-m MINTOKENS] [-d DELIMS] [-f FLAGS] FILE..."
-#define parse_full_usage ""
-*/
-
-#define pgrep_trivial_usage \
- "[-flnovx] [-s SID|-P PPID|PATTERN]"
-#define pgrep_full_usage "\n\n" \
- "Display process(es) selected by regex PATTERN\n" \
- "\nOptions:" \
- "\n -l Show command name too" \
- "\n -f Match against entire command line" \
- "\n -n Show the newest process only" \
- "\n -o Show the oldest process only" \
- "\n -v Negate the match" \
- "\n -x Match whole name (not substring)" \
- "\n -s Match session ID (0 for current)" \
- "\n -P Match parent process ID" \
-
-#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
-#define pidof_trivial_usage \
- "[OPTIONS] [NAME]..."
-#define USAGE_PIDOF "\n\nOptions:"
-#else
-#define pidof_trivial_usage \
- "[NAME]..."
-#define USAGE_PIDOF /* none */
-#endif
-#define pidof_full_usage "\n\n" \
- "List PIDs of all processes with names that match NAMEs" \
- USAGE_PIDOF \
- IF_FEATURE_PIDOF_SINGLE( \
- "\n -s Show only one PID" \
- ) \
- IF_FEATURE_PIDOF_OMIT( \
- "\n -o PID Omit given pid" \
- "\n Use %PPID to omit pid of pidof's parent" \
- ) \
-
-#define pidof_example_usage \
- "$ pidof init\n" \
- "1\n" \
- IF_FEATURE_PIDOF_OMIT( \
- "$ pidof /bin/sh\n20351 5973 5950\n") \
- IF_FEATURE_PIDOF_OMIT( \
- "$ pidof /bin/sh -o %PPID\n20351 5950")
-
-#define pivot_root_trivial_usage \
- "NEW_ROOT PUT_OLD"
-#define pivot_root_full_usage "\n\n" \
- "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \
- "the new root file system"
-
-#define pkill_trivial_usage \
- "[-l|-SIGNAL] [-fnovx] [-s SID|-P PPID|PATTERN]"
-#define pkill_full_usage "\n\n" \
- "Send a signal to process(es) selected by regex PATTERN\n" \
- "\nOptions:" \
- "\n -l List all signals" \
- "\n -f Match against entire command line" \
- "\n -n Signal the newest process only" \
- "\n -o Signal the oldest process only" \
- "\n -v Negate the match" \
- "\n -x Match whole name (not substring)" \
- "\n -s Match session ID (0 for current)" \
- "\n -P Match parent process ID" \
-
-
-#if ENABLE_DESKTOP
-
-#define ps_trivial_usage \
- "[-o COL1,COL2=HEADER]" IF_FEATURE_SHOW_THREADS(" [-T]")
-#define ps_full_usage "\n\n" \
- "Show list of processes\n" \
- "\nOptions:" \
- "\n -o COL1,COL2=HEADER Select columns for display" \
- IF_FEATURE_SHOW_THREADS( \
- "\n -T Show threads" \
- )
-
-#else /* !ENABLE_DESKTOP */
-
-#if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
-#define USAGE_PS "\nThis version of ps accepts no options"
-#else
-#define USAGE_PS "\nOptions:"
-#endif
-
-#define ps_trivial_usage \
- ""
-#define ps_full_usage "\n\n" \
- "Show list of processes\n" \
- USAGE_PS \
- IF_SELINUX( \
- "\n -Z Show selinux context" \
- ) \
- IF_FEATURE_PS_WIDE( \
- "\n w Wide output" \
- )
-
-#endif /* ENABLE_DESKTOP */
-
-#define ps_example_usage \
- "$ ps\n" \
- " PID Uid Gid State Command\n" \
- " 1 root root S init\n" \
- " 2 root root S [kflushd]\n" \
- " 3 root root S [kupdate]\n" \
- " 4 root root S [kpiod]\n" \
- " 5 root root S [kswapd]\n" \
- " 742 andersen andersen S [bash]\n" \
- " 743 andersen andersen S -bash\n" \
- " 745 root root S [getty]\n" \
- " 2990 andersen andersen R ps\n" \
-
-#define pscan_trivial_usage \
- "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
-#define pscan_full_usage "\n\n" \
- "Scan a host, print all open ports\n" \
- "\nOptions:" \
- "\n -c Show closed ports too" \
- "\n -b Show blocked ports too" \
- "\n -p Scan from this port (default 1)" \
- "\n -P Scan up to this port (default 1024)" \
- "\n -t Timeout (default 5000 ms)" \
- "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \
-
-#define raidautorun_trivial_usage \
- "DEVICE"
-#define raidautorun_full_usage "\n\n" \
- "Tell the kernel to automatically search and start RAID arrays"
-#define raidautorun_example_usage \
- "$ raidautorun /dev/md0"
-
-#define rdate_trivial_usage \
- "[-sp] HOST"
-#define rdate_full_usage "\n\n" \
- "Get and possibly set the system date and time from a remote HOST\n" \
- "\nOptions:" \
- "\n -s Set the system date and time (default)" \
- "\n -p Print the date and time" \
-
-#define rdev_trivial_usage \
- ""
-#define rdev_full_usage "\n\n" \
- "Print the device node associated with the filesystem mounted at '/'"
-#define rdev_example_usage \
- "$ rdev\n" \
- "/dev/mtdblock9 /\n"
-
-#define readahead_trivial_usage \
- "[FILE]..."
-#define readahead_full_usage "\n\n" \
- "Preload FILEs to RAM"
-
-#define readprofile_trivial_usage \
- "[OPTIONS]"
-#define readprofile_full_usage "\n\n" \
- "Options:" \
- "\n -m mapfile (Default: /boot/System.map)" \
- "\n -p profile (Default: /proc/profile)" \
- "\n -M NUM Set the profiling multiplier to NUM" \
- "\n -i Print only info about the sampling step" \
- "\n -v Verbose" \
- "\n -a Print all symbols, even if count is 0" \
- "\n -b Print individual histogram-bin counts" \
- "\n -s Print individual counters within functions" \
- "\n -r Reset all the counters (root only)" \
- "\n -n Disable byte order auto-detection" \
-
-#define scriptreplay_trivial_usage \
- "timingfile [typescript [divisor]]"
-#define scriptreplay_full_usage "\n\n" \
- "Play back typescripts, using timing information"
-
-#define restorecon_trivial_usage \
- "[-iFnRv] [-e EXCLUDEDIR]... [-o FILE] [-f FILE]"
-#define restorecon_full_usage "\n\n" \
- "Reset security contexts of files in pathname\n" \
- "\n -i Ignore files that don't exist" \
- "\n -f FILE File with list of files to process" \
- "\n -e DIR Directory to exclude" \
- "\n -R,-r Recurse" \
- "\n -n Don't change any file labels" \
- "\n -o FILE Save list of files with incorrect context" \
- "\n -v Verbose" \
- "\n -vv Show changed labels" \
- "\n -F Force reset of context to match file_context" \
- "\n for customizable files, or the user section," \
- "\n if it has changed" \
-
-#define rfkill_trivial_usage \
- "COMMAND [INDEX|TYPE]"
-#define rfkill_full_usage "\n\n" \
- "Enable/disable wireless devices\n" \
- "\nCommands:" \
- "\n list [INDEX|TYPE] List current state" \
- "\n block INDEX|TYPE Disable device" \
- "\n unblock INDEX|TYPE Enable device" \
- "\n" \
- "\n TYPE: all, wlan(wifi), bluetooth, uwb(ultrawideband)," \
- "\n wimax, wwan, gps, fm" \
-
-#define route_trivial_usage \
- "[{add|del|delete}]"
-#define route_full_usage "\n\n" \
- "Edit kernel routing tables\n" \
- "\nOptions:" \
- "\n -n Don't resolve names" \
- "\n -e Display other/more information" \
- "\n -A inet" IF_FEATURE_IPV6("{6}") " Select address family" \
-
-#define rtcwake_trivial_usage \
- "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
-#define rtcwake_full_usage "\n\n" \
- "Enter a system sleep state until specified wakeup time\n" \
- IF_LONG_OPTS( \
- "\n -a,--auto Read clock mode from adjtime" \
- "\n -l,--local Clock is set to local time" \
- "\n -u,--utc Clock is set to UTC time" \
- "\n -d,--device=DEV Specify the RTC device" \
- "\n -m,--mode=MODE Set the sleep state (default: standby)" \
- "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
- "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
- ) \
- IF_NOT_LONG_OPTS( \
- "\n -a Read clock mode from adjtime" \
- "\n -l Clock is set to local time" \
- "\n -u Clock is set to UTC time" \
- "\n -d DEV Specify the RTC device" \
- "\n -m MODE Set the sleep state (default: standby)" \
- "\n -s SEC Set the timeout in SEC seconds from now" \
- "\n -t TIME Set the timeout to TIME seconds from epoch" \
- )
-
-#define runcon_trivial_usage \
- "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] PROG ARGS\n" \
- "runcon CONTEXT PROG ARGS"
-#define runcon_full_usage "\n\n" \
- "Run PROG in a different security context\n" \
- "\n CONTEXT Complete security context\n" \
- IF_FEATURE_RUNCON_LONG_OPTIONS( \
- "\n -c,--compute Compute process transition context before modifying" \
- "\n -t,--type=TYPE Type (for same role as parent)" \
- "\n -u,--user=USER User identity" \
- "\n -r,--role=ROLE Role" \
- "\n -l,--range=RNG Levelrange" \
- ) \
- IF_NOT_FEATURE_RUNCON_LONG_OPTIONS( \
- "\n -c Compute process transition context before modifying" \
- "\n -t TYPE Type (for same role as parent)" \
- "\n -u USER User identity" \
- "\n -r ROLE Role" \
- "\n -l RNG Levelrange" \
- )
-
-#define runlevel_trivial_usage \
- "[FILE]"
-#define runlevel_full_usage "\n\n" \
- "Find the current and previous system runlevel\n" \
- "\n" \
- "If no utmp FILE exists or if no runlevel record can be found,\n" \
- "print \"unknown\""
-#define runlevel_example_usage \
- "$ runlevel /var/run/utmp\n" \
- "N 2"
-
-#define runsv_trivial_usage \
- "DIR"
-#define runsv_full_usage "\n\n" \
- "Start and monitor a service and optionally an appendant log service"
-
-#define runsvdir_trivial_usage \
- "[-P] [-s SCRIPT] DIR"
-#define runsvdir_full_usage "\n\n" \
- "Start a runsv process for each subdirectory. If it exits, restart it.\n" \
- "\n -P Put each runsv in a new session" \
- "\n -s SCRIPT Run SCRIPT <signo> after signal is processed" \
-
-#define rx_trivial_usage \
- "FILE"
-#define rx_full_usage "\n\n" \
- "Receive a file using the xmodem protocol"
-#define rx_example_usage \
- "$ rx /tmp/foo\n"
-
-#define script_trivial_usage \
- "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
-#define script_full_usage "\n\n" \
- "Options:" \
- "\n -a Append output" \
- "\n -c PROG Run PROG, not shell" \
- "\n -f Flush output after each write" \
- "\n -q Quiet" \
- IF_SCRIPTREPLAY( \
- "\n -t Send timing to stderr" \
- )
-
-#define selinuxenabled_trivial_usage NOUSAGE_STR
-#define selinuxenabled_full_usage ""
-
-#define sestatus_trivial_usage \
- "[-vb]"
-#define sestatus_full_usage "\n\n" \
- " -v Verbose" \
- "\n -b Display current state of booleans" \
-
-#define setenforce_trivial_usage \
- "[Enforcing | Permissive | 1 | 0]"
-#define setenforce_full_usage ""
-
-#define setfiles_trivial_usage \
- "[-dnpqsvW] [-e DIR]... [-o FILE] [-r alt_root_path]" \
- IF_FEATURE_SETFILES_CHECK_OPTION( \
- " [-c policyfile] spec_file" \
- ) \
- " pathname"
-#define setfiles_full_usage "\n\n" \
- "Reset file contexts under pathname according to spec_file\n" \
- IF_FEATURE_SETFILES_CHECK_OPTION( \
- "\n -c FILE Check the validity of the contexts against the specified binary policy" \
- ) \
- "\n -d Show which specification matched each file" \
- "\n -l Log changes in file labels to syslog" \
- "\n -n Don't change any file labels" \
- "\n -q Suppress warnings" \
- "\n -r DIR Use an alternate root path" \
- "\n -e DIR Exclude DIR" \
- "\n -F Force reset of context to match file_context for customizable files" \
- "\n -o FILE Save list of files with incorrect context" \
- "\n -s Take a list of files from stdin (instead of command line)" \
- "\n -v Show changes in file labels, if type or role are changing" \
- "\n -vv Show changes in file labels, if type, role, or user are changing" \
- "\n -W Display warnings about entries that had no matching files" \
-
-#define setfont_trivial_usage \
- "FONT [-m MAPFILE] [-C TTY]"
-#define setfont_full_usage "\n\n" \
- "Load a console font\n" \
- "\nOptions:" \
- "\n -m MAPFILE Load console screen map" \
- "\n -C TTY Affect TTY instead of /dev/tty" \
-
-#define setfont_example_usage \
- "$ setfont -m koi8-r /etc/i18n/fontname\n"
-
-#define setsebool_trivial_usage \
- "boolean value"
-
-#define setsebool_full_usage "\n\n" \
- "Change boolean setting"
-
-#define setsid_trivial_usage \
- "PROG ARGS"
-#define setsid_full_usage "\n\n" \
- "Run PROG in a new session. PROG will have no controlling terminal\n" \
- "and will not be affected by keyboard signals (Ctrl-C etc).\n" \
- "See setsid(2) for details." \
-
-#define last_trivial_usage \
- ""IF_FEATURE_LAST_FANCY("[-HW] [-f FILE]")
-#define last_full_usage "\n\n" \
- "Show listing of the last users that logged into the system" \
- IF_FEATURE_LAST_FANCY( "\n" \
- "\nOptions:" \
-/* "\n -H Show header line" */ \
- "\n -W Display with no host column truncation" \
- "\n -f FILE Read from FILE instead of /var/log/wtmp" \
- )
-
-#define slattach_trivial_usage \
- "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
-#define slattach_full_usage "\n\n" \
- "Attach network interface(s) to serial line(s)\n" \
- "\nOptions:" \
- "\n -p PROT Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \
- "\n -s SPD Set line speed" \
- "\n -e Exit after initializing device" \
- "\n -h Exit when the carrier is lost" \
- "\n -c PROG Run PROG when the line is hung up" \
- "\n -m Do NOT initialize the line in raw 8 bits mode" \
- "\n -L Enable 3-wire operation" \
- "\n -F Disable RTS/CTS flow control" \
-
-#define strings_trivial_usage \
- "[-afo] [-n LEN] [FILE]..."
-#define strings_full_usage "\n\n" \
- "Display printable strings in a binary file\n" \
- "\nOptions:" \
- "\n -a Scan whole file (default)" \
- "\n -f Precede strings with filenames" \
- "\n -n LEN At least LEN characters form a string (default 4)" \
- "\n -o Precede strings with decimal offsets" \
-
-#define sv_trivial_usage \
- "[-v] [-w SEC] CMD SERVICE_DIR..."
-#define sv_full_usage "\n\n" \
- "Control services monitored by runsv supervisor.\n" \
- "Commands (only first character is enough):\n" \
- "\n" \
- "status: query service status\n" \
- "up: if service isn't running, start it. If service stops, restart it\n" \
- "once: like 'up', but if service stops, don't restart it\n" \
- "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \
- " if it exists. After it stops, don't restart service\n" \
- "exit: send TERM and CONT signals to service and log service. If they exit,\n" \
- " runsv exits too\n" \
- "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
- "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
-
-#define swapoff_trivial_usage \
- "[-a] [DEVICE]"
-#define swapoff_full_usage "\n\n" \
- "Stop swapping on DEVICE\n" \
- "\nOptions:" \
- "\n -a Stop swapping on all swap devices" \
-
-#define swapon_trivial_usage \
- "[-a]" IF_FEATURE_SWAPON_PRI(" [-p PRI]") " [DEVICE]"
-#define swapon_full_usage "\n\n" \
- "Start swapping on DEVICE\n" \
- "\nOptions:" \
- "\n -a Start swapping on all swap devices" \
- IF_FEATURE_SWAPON_PRI( \
- "\n -p PRI Set swap device priority" \
- ) \
-
-#define switch_root_trivial_usage \
- "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
-#define switch_root_full_usage "\n\n" \
- "Free initramfs and switch to another root fs:\n" \
- "chroot to NEW_ROOT, delete all in /, move NEW_ROOT to /,\n" \
- "execute NEW_INIT. PID must be 1. NEW_ROOT must be a mountpoint.\n" \
- "\nOptions:" \
- "\n -c DEV Reopen stdio to DEV after switch" \
-
-#define sysctl_trivial_usage \
- "[OPTIONS] [VALUE]..."
-#define sysctl_full_usage "\n\n" \
- "Configure kernel parameters at runtime\n" \
- "\nOptions:" \
- "\n -n Don't print key names" \
- "\n -e Don't warn about unknown keys" \
- "\n -w Change sysctl setting" \
- "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
- "\n -a Display all values" \
- "\n -A Display all values in table form" \
-
-#define sysctl_example_usage \
- "sysctl [-n] [-e] variable...\n" \
- "sysctl [-n] [-e] -w variable=value...\n" \
- "sysctl [-n] [-e] -a\n" \
- "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \
- "sysctl [-n] [-e] -A\n"
-
-#define syslogd_trivial_usage \
- "[OPTIONS]"
-#define syslogd_full_usage "\n\n" \
- "System logging utility.\n" \
- "This version of syslogd ignores /etc/syslog.conf\n" \
- "\nOptions:" \
- "\n -n Run in foreground" \
- "\n -O FILE Log to given file (default:/var/log/messages)" \
- "\n -l N Set local log level" \
- "\n -S Smaller logging output" \
- IF_FEATURE_ROTATE_LOGFILE( \
- "\n -s SIZE Max size (KB) before rotate (default:200KB, 0=off)" \
- "\n -b N N rotated logs to keep (default:1, max=99, 0=purge)") \
- IF_FEATURE_REMOTE_LOG( \
- "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \
- "\n -L Log locally and via network (default is network only if -R)") \
- IF_FEATURE_SYSLOGD_DUP( \
- "\n -D Drop duplicates") \
- IF_FEATURE_IPC_SYSLOG( \
- "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
- /* NB: -Csize shouldn't have space (because size is optional) */
-/* "\n -m MIN Minutes between MARK lines (default:20, 0=off)" */
-
-#define syslogd_example_usage \
- "$ syslogd -R masterlog:514\n" \
- "$ syslogd -R 192.168.1.1:601\n"
-
-#define taskset_trivial_usage \
- "[-p] [MASK] [PID | PROG ARGS]"
-#define taskset_full_usage "\n\n" \
- "Set or get CPU affinity\n" \
- "\nOptions:" \
- "\n -p Operate on an existing PID" \
-
-#define taskset_example_usage \
- "$ taskset 0x7 ./dgemm_test&\n" \
- "$ taskset -p 0x1 $!\n" \
- "pid 4790's current affinity mask: 7\n" \
- "pid 4790's new affinity mask: 1\n" \
- "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \
- "pid 6671's current affinity mask: 1\n" \
- "pid 6671's new affinity mask: 1\n" \
- "$ taskset -p 1\n" \
- "pid 1's current affinity mask: 3\n"
-
-#if ENABLE_FEATURE_TELNET_AUTOLOGIN
-#define telnet_trivial_usage \
- "[-a] [-l USER] HOST [PORT]"
-#define telnet_full_usage "\n\n" \
- "Connect to telnet server\n" \
- "\nOptions:" \
- "\n -a Automatic login with $USER variable" \
- "\n -l USER Automatic login as USER" \
-
-#else
-#define telnet_trivial_usage \
- "HOST [PORT]"
-#define telnet_full_usage "\n\n" \
- "Connect to telnet server"
-#endif
-
-#define telnetd_trivial_usage \
- "[OPTIONS]"
-#define telnetd_full_usage "\n\n" \
- "Handle incoming telnet connections" \
- IF_NOT_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
- "\nOptions:" \
- "\n -l LOGIN Exec LOGIN on connect" \
- "\n -f ISSUE_FILE Display ISSUE_FILE instead of /etc/issue" \
- "\n -K Close connection as soon as login exits" \
- "\n (normally wait until all programs close slave pty)" \
- IF_FEATURE_TELNETD_STANDALONE( \
- "\n -p PORT Port to listen on" \
- "\n -b ADDR[:PORT] Address to bind to" \
- "\n -F Run in foreground" \
- "\n -i Inetd mode" \
- IF_FEATURE_TELNETD_INETD_WAIT( \
- "\n -w SEC Inetd 'wait' mode, linger time SEC" \
- "\n -S Log to syslog (implied by -i or without -F and -w)" \
- ) \
- )
-
-#define tc_trivial_usage \
- /*"[OPTIONS] "*/"OBJECT CMD [dev STRING]"
-#define tc_full_usage "\n\n" \
- "OBJECT: {qdisc|class|filter}\n" \
- "CMD: {add|del|change|replace|show}\n" \
- "\n" \
- "qdisc [ handle QHANDLE ] [ root |"IF_FEATURE_TC_INGRESS(" ingress |")" parent CLASSID ]\n" \
- /* "[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
- " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
- " QDISC_KIND := { [p|b]fifo | tbf | prio | cbq | red | etc. }\n" \
- "qdisc show [ dev STRING ]"IF_FEATURE_TC_INGRESS(" [ingress]")"\n" \
- "class [ classid CLASSID ] [ root | parent CLASSID ]\n" \
- " [ [ QDISC_KIND ] [ help | OPTIONS ] ]\n" \
- "class show [ dev STRING ] [ root | parent CLASSID ]\n" \
- "filter [ pref PRIO ] [ protocol PROTO ]\n" \
- /* "\t[ estimator INTERVAL TIME_CONSTANT ]\n" */ \
- " [ root | classid CLASSID ] [ handle FILTERID ]\n" \
- " [ [ FILTER_TYPE ] [ help | OPTIONS ] ]\n" \
- "filter show [ dev STRING ] [ root | parent CLASSID ]"
-
-#define tcpsvd_trivial_usage \
- "[-hEv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] IP PORT PROG"
-/* with not-implemented options: */
-/* "[-hpEvv] [-c N] [-C N[:MSG]] [-b N] [-u USER] [-l NAME] [-i DIR|-x CDB] [-t SEC] IP PORT PROG" */
-#define tcpsvd_full_usage "\n\n" \
- "Create TCP socket, bind to IP:PORT and listen\n" \
- "for incoming connection. Run PROG for each connection.\n" \
- "\n IP IP to listen on. '0' = all" \
- "\n PORT Port to listen on" \
- "\n PROG ARGS Program to run" \
- "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
- "\n -u USER[:GRP] Change to user/group after bind" \
- "\n -c N Handle up to N connections simultaneously" \
- "\n -b N Allow a backlog of approximately N TCP SYNs" \
- "\n -C N[:MSG] Allow only up to N connections from the same IP." \
- "\n New connections from this IP address are closed" \
- "\n immediately. MSG is written to the peer before close" \
- "\n -h Look up peer's hostname" \
- "\n -E Don't set up environment variables" \
- "\n -v Verbose" \
-
-#define udpsvd_trivial_usage \
- "[-hEv] [-c N] [-u USER] [-l NAME] IP PORT PROG"
-#define udpsvd_full_usage "\n\n" \
- "Create UDP socket, bind to IP:PORT and wait\n" \
- "for incoming packets. Run PROG for each packet,\n" \
- "redirecting all further packets with same peer ip:port to it.\n" \
- "\n IP IP to listen on. '0' = all" \
- "\n PORT Port to listen on" \
- "\n PROG ARGS Program to run" \
- "\n -l NAME Local hostname (else looks up local hostname in DNS)" \
- "\n -u USER[:GRP] Change to user/group after bind" \
- "\n -c N Handle up to N connections simultaneously" \
- "\n -h Look up peer's hostname" \
- "\n -E Don't set up environment variables" \
- "\n -v Verbose" \
-
-#define tftp_trivial_usage \
- "[OPTIONS] HOST [PORT]"
-#define tftp_full_usage "\n\n" \
- "Transfer a file from/to tftp server\n" \
- "\nOptions:" \
- "\n -l FILE Local FILE" \
- "\n -r FILE Remote FILE" \
- IF_FEATURE_TFTP_GET( \
- "\n -g Get file" \
- ) \
- IF_FEATURE_TFTP_PUT( \
- "\n -p Put file" \
- ) \
- IF_FEATURE_TFTP_BLOCKSIZE( \
- "\n -b SIZE Transfer blocks of SIZE octets" \
- )
-
-#define tftpd_trivial_usage \
- "[-cr] [-u USER] [DIR]"
-#define tftpd_full_usage "\n\n" \
- "Transfer a file on tftp client's request\n" \
- "\n" \
- "tftpd should be used as an inetd service.\n" \
- "tftpd's line for inetd.conf:\n" \
- " 69 dgram udp nowait root tftpd tftpd /files/to/serve\n" \
- "It also can be ran from udpsvd:\n" \
- " udpsvd -vE 0.0.0.0 69 tftpd /files/to/serve\n" \
- "\nOptions:" \
- "\n -r Prohibit upload" \
- "\n -c Allow file creation via upload" \
- "\n -u Access files as USER" \
-
-#define time_trivial_usage \
- "[-v] PROG ARGS"
-#define time_full_usage "\n\n" \
- "Run PROG, display resource usage when it exits\n" \
- "\nOptions:" \
- "\n -v Verbose" \
-
-#define timeout_trivial_usage \
- "[-t SECS] [-s SIG] PROG ARGS"
-#define timeout_full_usage "\n\n" \
- "Runs PROG. Sends SIG to it if it is not gone in SECS seconds.\n" \
- "Defaults: SECS: 10, SIG: TERM." \
-
-#define traceroute_trivial_usage \
- "[-"IF_TRACEROUTE6("46")"FIldnrv] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
- " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE]\n" \
- " [-z PAUSE_MSEC] HOST [BYTES]"
-#define traceroute_full_usage "\n\n" \
- "Trace the route to HOST\n" \
- "\nOptions:" \
- IF_TRACEROUTE6( \
- "\n -4,-6 Force IP or IPv6 name resolution" \
- ) \
- "\n -F Set the don't fragment bit" \
- "\n -I Use ICMP ECHO instead of UDP datagrams" \
- "\n -l Display the TTL value of the returned packet" \
- "\n -d Set SO_DEBUG options to socket" \
- "\n -n Print numeric addresses" \
- "\n -r Bypass routing tables, send directly to HOST" \
- "\n -v Verbose" \
- "\n -m Max time-to-live (max number of hops)" \
- "\n -p Base UDP port number used in probes" \
- "\n (default 33434)" \
- "\n -q Number of probes per TTL (default 3)" \
- "\n -s IP address to use as the source address" \
- "\n -t Type-of-service in probe packets (default 0)" \
- "\n -w Time in seconds to wait for a response (default 3)" \
- "\n -g Loose source route gateway (8 max)" \
-
-#define traceroute6_trivial_usage \
- "[-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES]\n" \
- " [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-i IFACE]\n" \
- " HOST [BYTES]"
-#define traceroute6_full_usage "\n\n" \
- "Trace the route to HOST\n" \
- "\nOptions:" \
- "\n -d Set SO_DEBUG options to socket" \
- "\n -n Print numeric addresses" \
- "\n -r Bypass routing tables, send directly to HOST" \
- "\n -v Verbose" \
- "\n -m Max time-to-live (max number of hops)" \
- "\n -p Base UDP port number used in probes" \
- "\n (default is 33434)" \
- "\n -q Number of probes per TTL (default 3)" \
- "\n -s IP address to use as the source address" \
- "\n -t Type-of-service in probe packets (default 0)" \
- "\n -w Time in seconds to wait for a response (default 3)" \
-
-#define ttysize_trivial_usage \
- "[w] [h]"
-#define ttysize_full_usage "\n\n" \
- "Print dimension(s) of stdin's terminal, on error return 80x25"
-
-#define tunctl_trivial_usage \
- "[-f device] ([-t name] | -d name)" IF_FEATURE_TUNCTL_UG(" [-u owner] [-g group] [-b]")
-#define tunctl_full_usage "\n\n" \
- "Create or delete tun interfaces\n" \
- "\nOptions:" \
- "\n -f name tun device (/dev/net/tun)" \
- "\n -t name Create iface 'name'" \
- "\n -d name Delete iface 'name'" \
- IF_FEATURE_TUNCTL_UG( \
- "\n -u owner Set iface owner" \
- "\n -g group Set iface group" \
- "\n -b Brief output" \
- )
-#define tunctl_example_usage \
- "# tunctl\n" \
- "# tunctl -d tun0\n"
-
-#define udhcpd_trivial_usage \
- "[-fS]" IF_FEATURE_UDHCP_PORT(" [-P N]") " [CONFFILE]" \
-
-#define udhcpd_full_usage "\n\n" \
- "DHCP server\n" \
- "\n -f Run in foreground" \
- "\n -S Log to syslog too" \
- IF_FEATURE_UDHCP_PORT( \
- "\n -P N Use port N (default 67)" \
- )
-
-#define umount_trivial_usage \
- "[OPTIONS] FILESYSTEM|DIRECTORY"
-#define umount_full_usage "\n\n" \
- "Unmount file systems\n" \
- "\nOptions:" \
- IF_FEATURE_UMOUNT_ALL( \
- "\n -a Unmount all file systems" IF_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
- ) \
- IF_FEATURE_MTAB_SUPPORT( \
- "\n -n Don't erase /etc/mtab entries" \
- ) \
- "\n -r Try to remount devices as read-only if mount is busy" \
- "\n -l Lazy umount (detach filesystem)" \
- "\n -f Force umount (i.e., unreachable NFS server)" \
- IF_FEATURE_MOUNT_LOOP( \
- "\n -d Free loop device if it has been used" \
- )
-
-#define umount_example_usage \
- "$ umount /dev/hdc1\n"
-
-#define uptime_trivial_usage \
- ""
-#define uptime_full_usage "\n\n" \
- "Display the time since the last boot"
-
-#define uptime_example_usage \
- "$ uptime\n" \
- " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
-
-#define vconfig_trivial_usage \
- "COMMAND [OPTIONS]"
-#define vconfig_full_usage "\n\n" \
- "Create and remove virtual ethernet devices\n" \
- "\nOptions:" \
- "\n add [interface-name] [vlan_id]" \
- "\n rem [vlan-name]" \
- "\n set_flag [interface-name] [flag-num] [0 | 1]" \
- "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
- "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
- "\n set_name_type [name-type]" \
-
-#define volname_trivial_usage \
- "[DEVICE]"
-#define volname_full_usage "\n\n" \
- "Show CD volume name of the DEVICE (default /dev/cdrom)"
-
-#define wall_trivial_usage \
- "[FILE]"
-#define wall_full_usage "\n\n" \
- "Write content of FILE or stdin to all logged-in users"
-#define wall_sample_usage \
- "echo foo | wall\n" \
- "wall ./mymessage"
-
-#define watch_trivial_usage \
- "[-n SEC] [-t] PROG ARGS"
-#define watch_full_usage "\n\n" \
- "Run PROG periodically\n" \
- "\nOptions:" \
- "\n -n Loop period in seconds (default 2)" \
- "\n -t Don't print header" \
-
-#define watch_example_usage \
- "$ watch date\n" \
- "Mon Dec 17 10:31:40 GMT 2000\n" \
- "Mon Dec 17 10:31:42 GMT 2000\n" \
- "Mon Dec 17 10:31:44 GMT 2000"
-
-#define watchdog_trivial_usage \
- "[-t N[ms]] [-T N[ms]] [-F] DEV"
-#define watchdog_full_usage "\n\n" \
- "Periodically write to watchdog device DEV\n" \
- "\nOptions:" \
- "\n -T N Reboot after N seconds if not reset (default 60)" \
- "\n -t N Reset every N seconds (default 30)" \
- "\n -F Run in foreground" \
- "\n" \
- "\nUse 500ms to specify period in milliseconds" \
-
-#define zcip_trivial_usage \
- "[OPTIONS] IFACE SCRIPT"
-#define zcip_full_usage "\n\n" \
- "Manage a ZeroConf IPv4 link-local address\n" \
- "\nOptions:" \
- "\n -f Run in foreground" \
- "\n -q Quit after obtaining address" \
- "\n -r 169.254.x.x Request this address first" \
- "\n -v Verbose" \
- "\n" \
- "\nWith no -q, runs continuously monitoring for ARP conflicts," \
- "\nexits only on I/O errors (link down etc)" \
-
-
#endif