aboutsummaryrefslogtreecommitdiff
path: root/networking/Config.in
diff options
context:
space:
mode:
Diffstat (limited to 'networking/Config.in')
-rw-r--r--networking/Config.in48
1 files changed, 26 insertions, 22 deletions
diff --git a/networking/Config.in b/networking/Config.in
index fb6988b41..5f38062c6 100644
--- a/networking/Config.in
+++ b/networking/Config.in
@@ -216,7 +216,7 @@ config FEATURE_HTTPD_ENCODE_URL_STR
depends on HTTPD
help
This option allows html encoding of arbitrary strings for display
- by the browser. Output goes to stdout.
+ by the browser. Output goes to stdout.
For example, httpd -e "<Hello World>" produces
"&#60Hello&#32World&#62".
@@ -264,7 +264,7 @@ config FEATURE_IFCONFIG_SLIP
default n
depends on IFCONFIG
help
- Allow "keepalive" and "outfill" support for SLIP. If you're not
+ Allow "keepalive" and "outfill" support for SLIP. If you're not
planning on using serial lines, leave this unchecked.
config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
@@ -281,7 +281,7 @@ config FEATURE_IFCONFIG_HW
depends on IFCONFIG
help
Set the hardware address of this interface, if the device driver
- supports this operation. Currently, we only support the 'ether'
+ supports this operation. Currently, we only support the 'ether'
class.
config FEATURE_IFCONFIG_BROADCAST_PLUS
@@ -303,15 +303,15 @@ config IFUPDOWN
bool "ifupdown"
default n
help
- Activate or deactivate the specified interfaces. This applet makes
+ Activate or deactivate the specified interfaces. This applet makes
use of either "ifconfig" and "route" or the "ip" command to actually
- configure network interfaces. Therefore, you will probably also want
+ configure network interfaces. Therefore, you will probably also want
to enable either IFCONFIG and ROUTE, or enable
- FEATURE_IFUPDOWN_IP and the various IP options. Of
+ FEATURE_IFUPDOWN_IP and the various IP options. Of
course you could use non-busybox versions of these programs, so
against my better judgement (since this will surely result in plenty
of support questions on the mailing list), I do not force you to
- enable these additional options. It is up to you to supply either
+ enable these additional options. It is up to you to supply either
"ifconfig", "route" and "run-parts" or the "ip" command, either
via busybox or via standalone utilities.
@@ -458,7 +458,7 @@ config IP
default n
help
The "ip" applet is a TCP/IP interface configuration and routing
- utility. You generally don't need "ip" to use busybox with
+ utility. You generally don't need "ip" to use busybox with
TCP/IP.
config FEATURE_IP_ADDRESS
@@ -558,7 +558,8 @@ config FEATURE_IPCALC_FANCY
default y
depends on IPCALC
help
- Adds the options hostname, prefix and silent to the output of "ipcalc".
+ Adds the options hostname, prefix and silent to the output of
+ "ipcalc".
config FEATURE_IPCALC_LONG_OPTIONS
bool "Enable long options"
@@ -688,7 +689,8 @@ config SLATTACH
bool "slattach"
default n
help
- slattach is a small utility to attach network interfaces to serial lines.
+ slattach is a small utility to attach network interfaces to serial
+ lines.
config TELNET
bool "telnet"
@@ -703,7 +705,7 @@ config FEATURE_TELNET_TTYPE
depends on TELNET
help
Setting this option will forward the TERM environment variable to the
- remote host you are connecting to. This is useful to make sure that
+ remote host you are connecting to. This is useful to make sure that
things like ANSI colors and other control sequences behave.
config FEATURE_TELNET_AUTOLOGIN
@@ -722,9 +724,9 @@ config TELNETD
select FEATURE_SYSLOG
help
A daemon for the TELNET protocol, allowing you to log onto the host
- running the daemon. Please keep in mind that the TELNET protocol
- sends passwords in plain text. If you can't afford the space for an
- SSH daemon and you trust your network, you may say 'y' here. As a
+ running the daemon. Please keep in mind that the TELNET protocol
+ sends passwords in plain text. If you can't afford the space for an
+ SSH daemon and you trust your network, you may say 'y' here. As a
more secure alternative, you should seriously consider installing the
very small Dropbear SSH daemon instead:
http://matt.ucc.asn.au/dropbear/dropbear.html
@@ -750,7 +752,7 @@ config TELNETD
mount -t devpts devpts /dev/pts
You need to be sure that Busybox has LOGIN and
- FEATURE_SUID enabled. And finally, you should make
+ FEATURE_SUID enabled. And finally, you should make
certain that Busybox has been installed setuid root:
chown root.root /bin/busybox
@@ -770,7 +772,7 @@ config TFTP
bool "tftp"
default n
help
- This enables the Trivial File Transfer Protocol client program. TFTP
+ This enables the Trivial File Transfer Protocol client program. TFTP
is usually used for simple, small transfers such as a root image
for a network-enabled bootloader.
@@ -789,7 +791,7 @@ config FEATURE_TFTP_GET
default y
depends on TFTP || TFTPD
help
- Add support for the GET command within the TFTP client. This allows
+ Add support for the GET command within the TFTP client. This allows
a client to retrieve a file from a TFTP server.
Also enable upload support in tftpd, if tftpd is selected.
@@ -798,7 +800,7 @@ config FEATURE_TFTP_PUT
default y
depends on TFTP || TFTPD
help
- Add support for the PUT command within the TFTP client. This allows
+ Add support for the PUT command within the TFTP client. This allows
a client to transfer a file to a TFTP server.
Also enable download support in tftpd, if tftpd is selected.
@@ -815,7 +817,7 @@ config DEBUG_TFTP
default n
depends on TFTP
help
- Enable debug settings for tftp. This is useful if you're running
+ Enable debug settings for tftp. This is useful if you're running
into problems with tftp as the protocol doesn't help you much when
you run into problems.
@@ -830,7 +832,7 @@ config FEATURE_TRACEROUTE_VERBOSE
default n
depends on TRACEROUTE
help
- Add some verbosity to traceroute. This includes amongst other things
+ Add some verbosity to traceroute. This includes amongst other things
hostnames and ICMP response types.
config FEATURE_TRACEROUTE_SOURCE_ROUTE
@@ -900,12 +902,14 @@ config TCPSVD
bool "tcpsvd"
default n
help
- tcpsvd listens on a TCP port and runs a program for each new connection
+ tcpsvd listens on a TCP port and runs a program for each new
+ connection.
config UDPSVD
bool "udpsvd"
default n
help
- udpsvd listens on an UDP port and runs a program for each new connection
+ udpsvd listens on an UDP port and runs a program for each new
+ connection.
endmenu