diff options
Diffstat (limited to 'networking/udhcp/ChangeLog')
| -rw-r--r-- | networking/udhcp/ChangeLog | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/networking/udhcp/ChangeLog b/networking/udhcp/ChangeLog new file mode 100644 index 000000000..9c269d85d --- /dev/null +++ b/networking/udhcp/ChangeLog @@ -0,0 +1,246 @@ +0.9.8 (pending) ++ udhcp now fits nicely into busybox + (Glenn McGrath <bug1@optushome.com.au> as well as myself) ++ updated client manpage (me) ++ both client and server now use sockets for signal handling, + hopefully, this will be the last needed change in signal + handling, I'm fairly certain all the possible races are now + closed. (me) ++ The server now restarts the auto_time timer when it receives + a SIGUSR1 (write out config file). (me) ++ Improve signal handling (David Poole) ++ Fix to config file parsing (Matt Kraai) ++ Fix load lease logic (me) ++ Fix clear_lease logic (me) ++ -h is now an alias for -H (udhcp bug #1253) ++ Shorter timeout on not receiving offers (me) ++ Improved signal behavior by client (me) ++ Would never assign end address (Keith Smith <keith@ksmith.com>) ++ Was improperly reporting yiaddr as siaddr (ben-udhcp@bdlow.net) + udhcp bug#1256 ++ Fixed reading of client id (David Poole <davep@portsmith.com>) ++ change sys_errlist[] to strerror() as it aparently doesn't exist + (andersee <andersee@codepoet.org>) ++ fixed get_raw_packet so it returns -2 on non fatal errors + (Ted Lemon <Ted.Lemon@nominum.com>) ++ Improved (hopefully) NAKing behavior (me) ++ Added -b option (Jouni Malinen) ++ Compute checksums correctly on big endian hosts + (Jouni Malinen <jkmaline@cc.hut.fi>) + +0.9.7 (020526) ++ Use add_lease in read_leases, sanitizes leases more, and clears out exprired + ones if there is no more room (me) ++ Moved udhcpd.leases to /var/lib/misc/udhcpd.leases (Debian bug #147747) ++ Change (obsolete) AF_INET in arping.c to PF_PACKET (Debian bug #127049) ++ Added script hook for DHCPNAK (nak), as well as providing the message option + (me) ++ Generate the paramaters request list by seeing what options in options.c are + ored with OPTION_REQ in options.c ++ Fix dhcp renew forgetfullness on client (bug #1230) ++ Fix dhcp release bug on client (bug #1231) ++ Set option request list for DHCP renew (bug #1233) ++ Set BOOTREQUEST/REPLY properly ++ Change client-identifier field to popularly expected behavior (me) ++ Only reopen port on errors (me) ++ Change fork/close/setsid structures to daemon() (me) ++ Allow user to specify udhcpd config file at run time (Steven, me) ++ Write pidfile after changing it (Steven CTR Carr <Steven.CTR.Carr@tc.faa.gov>) ++ Added env var docs to udhcpc man page (Matt) ++ Standardized lowercase udhcp in documentation (me) ++ Accept packets without a UDP checksum (me) ++ Accept packets with extra garbage (me) ++ Better error handling in files.c (me) ++ Combined read_interface function to reduce COMBINED_BINARY size (me) ++ Drop calc_length(), some servers choke on smaller packets (me) ++ Try to clean some fat out (me) + +0.9.6 (011001) ++ Added bootp paramaters to server (me) ++ Added bootp paramaters to client (me) ++ Added vendor id to client (me) ++ Better pidfile handling in client and server (me) ++ Added man pages (Matt Kraai <kraai@alumni.carnegiemellon.edu>) + +0.9.5 (010914) ++ Fixed $HOME and $PATH env passing (me) ++ Fixed client to only listen for raw packets on correct interface (me) ++ added --quit,-q option to quit after a lease is obtained (me) ++ Fixed 100% CPU utilization by client when interface is down (me) + +0.9.4 (010827) ++ Force broadcast to broken clients that request unicast (ie, MSFT 98) ++ Make install rules (Adam J. Richter <adam@yggdrasil.com>) ++ One scripts, instead of many (Adam) ++ Removed script paramater info files (env vars only) (Adam) ++ Controlling of forking behavior in client (Adam) ++ General script.c/dhcpc.c cleanups (Adam) + +0.9.3 (010820) ++ Increased debugging verbosity (me) ++ Cut trailing whitespace when reading config file (me) ++ added hostname option to client (me) ++ fixed a strncpy bug in script.c (me) ++ fixed a leaky socket in dhcpc.c (me) ++ fixed a leaky socket in dhcpd.c (me) + +0.9.2 (010810) ++ Added raw sockets to client (me) ++ alignment fixes (Mark Huang) ++ compiler warning fixes (Mark Huang) ++ client now sends parameter list (Mark Huang/me) ++ added ipttl option ++ Does now not request broadcast packets + +0.9.1 (010806) ++ Added udhcpc client ++ reorganized functions/files ++ listening socket now only binds to one interface + +0.9.0 (010720) Major rewrite, current changes, goals: ++ should not segfault on bogus packets. ++ Options can be read from sname and file fields. ++ supports all DHCP messages (release, decline, inform). ++ IP block is now specified by a range of IP's. ++ Leases file now contains lease time (relative, or absolute). ++ Just about any DHCP option is now supported. ++ DNS entries are no longer read from resolv.conf ++ Lease file can be written periodically when the process receives a SIGUSR1 ++ arpping should be supported on all arches. ++ support for DHCP relays. ++ DHCP messages can be unicast if the client requests it. ++ many, many, many other things. + +0.8.29 (000323) ++ stable(?) release + + +0.8.28 (000323) ++ removed alarm as it was causing server to go down ++ removed debugging ++ break down dhcpd.c into manageable files + + +0.8.27 (000221) ++ OFFER also sends gateway/subnet (for picky dhcp clients) ++ multiple DNS now handled from resolv.conf if available ++ multiple WINS (from dhcpd.conf) + +0.8.25 (000120) ++ now compiles *and* runs on a generic linux system + tested with a windows 98 client and the sample config + files in the samples directory. + +0.8.24 (000117) ++ makeiplist tool has basic functionality in place ++ new sample config files ++ route add -host 255.255.255.255 dev eth0 added for generic linux + +0.8.23 (000117) ++ NETtel specific fix for ignoring dhcp requests on 2nd interface + +0.8.22 (000113) ++ minor changes to compile under a generic linux system ++ minor config file location changes for a generic linux system ++ makeiplist fixes.. still incomplete.. but etting closer + +0.8.21 (000113) ++ now sends the correct server ip instead of hardcoded value ++ minor debugging fixes for critical messages + +0.8.20 (000106) ++ cut out dhcp server checking.. this was causing dialout ppp + sessions with idle time set to never time out. ++ also removed the 10 second pause before launching.. as this + was originally to stop it replying to a dhcp client + on a NETtel which was really a bad way to do it in the + first place :-) + +0.8.19 (000104) ++ fixes for route add -host on a machine that needs to run both + a DHCP client and server (dual eth box) + +0.8.18 (991220) + ++ Race conditions fixed by disabling alarm whilst the server is busy ++ Fixed continous clearing of the offered array so that it is only cleared + when it is dirty - (could change the position of when dirty is set) + +0.8.17 (991212) + +- has problems clearing out the offered array + +0.8.16 (991203) ++ Non blocking error is changes to informational as it is not really + an error + +0.8.15 (991129) ++ Servs the dns field 3 times (Nettel only) so that windows servers + dont time out whilst nettel is booting + +0.8.14 (991126) ++ added owner check for the offered array so clean out time may be + increased ++ added new func to print out chadder/MAC + +0.8.13 (991125) ++ added win95 support (w95 changed xid halfway through conversation) ++ had to change the offered array to use hardware addresses instead of xid ++ fixed re offered bug ++ added more debugging + +0.8.12 (991111) ++ debugging was real bad.. cleaned up a bit.. needs overhaul + + +0.8.11 (991110) ++ fixed up offeredAddr array to actually be used now!! offeredAddr is + used to see if another simultaneous connecting client was offered + an address that we are about to offer another client (multiple + client bug) ++ removed re_offered variable as it breaks multiple client support ++ added lease time to ACK -- doesn't work if in OFFER ++ decreased internal array clear delay to 60 seconds ++ minor findAddr bug (returning -1 instead of 0) ++ if clients xid already in offeredAddr offer the same addr and don't add a + new addr to offered (caused by a client issuing multiple DISCOVERs) + +0.8.10 (991105) ++ \n bug in arpping ++ minor debugging changes (removed printfs etc) ++ started browseiplist (not finished) + +0.8.9 (19991105) ++ fixed options array size bug (options were cut off) + +0.8.8 (19991105) ++ ignores requests from dhcpcd on the same machine + +0.8.7 (19991104) ++ don't die if we can't bind to search for existing DHCP server ++ slightly more verbose syslogging + +0.8.6 (19991103) ++ added makeiplist (not finished -- core dumps) ++ minor debug changes + +0.8.5 (19991029) ++ exits if another DHCP server is already on the network ++ added Linux Makefile + +0.8.4 (19991026) ++ minor bug fix in findaddr preventing an addr being found + +0.8.3 (19991025) ++ fixed up debugging ++ minor hwaddr issues + +0.8.2 (19991022) ++ free leases (new arpping code from dhcpcd) ++ fixed bug where crashes if no leases/iplist file ++ syslogging and debugging switch ++ serve DNS from resolv.conf ++ fixed bug where new lease added if same mac offered ++ now checks the ip is free b4 offering ++ now supports wins server + |