Age | Commit message (Collapse) | Author |
|
This particular corrupted file can be dealth with by using "unsigned".
If there will be cases where it genuinely overflows, there is a disabled
code to deal with that too.
function old new delta
get_next_block 1678 1667 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
parse_stream 2692 2690 -2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Markus Gothe <nietzsche@lysator.liu.se>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
expandstr 120 209 +89
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This patch only affects prompts with newlines.
We redraw the prompt [+ input] occasionally, e.g. during tab completion,
history browsing or search, etc, and we expect it to align with prior
redraws, such that the visible effect is that only the input changes.
With multi-line PS1, redraw always printed the prompt some lines below
the old one, which resulted in terminal scroll during every redraw.
Now we only redraw the last PS1 line, so vertical alignment is easier to
manage (we already calculated it using only the last line, but re-drew
all lines - that was the culprit), which fixes those extra scrolls.
Notes:
- We now use the full prompt for the initial draw, after clear-screen (^L),
and after tab-completion choices are displayed. Everything else now
redraws using the last/sole prompt line.
- During terminal resize we now only redraw the last[/sole] prompt line,
which is arguably better because it's hard to do right (and we never did).
- Good side effect for reverse-i-search: its prompt now replaces only the
last line of the original prompt - like other shells do.
function old new delta
put_prompt_custom - 66 +66
draw_custom - 66 +66
parse_and_put_prompt 766 806 +40
read_line_input 3867 3884 +17
input_tab 1069 1076 +7
cmdedit_setwidth 61 63 +2
redraw 59 47 -12
put_prompt 46 - -46
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 4/1 up/down: 198/-58) Total: 140 bytes
Signed-off-by: Avi Halachmi <avihpit@yahoo.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
parse_cached_kb - 85 +85
free_main 580 537 -43
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 85/-43) Total: 42 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
It's not clear at all why we do it twice. git archaeology did not help.
function old new delta
date_main 836 839 +3
maybe_set_utc 16 - -16
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When 'i' or 's' modes are selected block array is filled from offset 3
(blen = 3) but copied to data.block buffer from offset 0 so first 3 bytes
contains garbage from stack.
The buffer that is sent is also 3 bytes too long due to those extra 3
bytes.
Signed-off-by: Avi Fishman <AviFishman70@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
out 85 75 -10
udhcpd_main 1472 1461 -11
open_stdio_to_tty 98 85 -13
init_exec 245 232 -13
udhcpc_main 2763 2749 -14
do_cmd 4771 4755 -16
status_line_bold_errno 32 14 -18
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-95) Total: -95 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
be bogus
With new code, we request that target IP (server ID) must be directly reachable.
If it's not, this happens:
udhcpc: waiting 2000 seconds
udhcpc: entering listen mode: kernel
udhcpc: opening listen socket on *:68 wlan0
udhcpc: entering renew state
udhcpc: sending renew to 1.1.1.1
udhcpc: send: Network is unreachable
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy!
udhcpc: entering rebinding state
udhcpc: entering listen mode: raw
udhcpc: created raw socket
udhcpc: sending renew to 0.0.0.0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast
which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed
over eth0 (!) and maybe even into Internet (!!!).
function old new delta
udhcpc_main 2752 2763 +11
udhcp_send_kernel_packet 295 301 +6
send_renew 82 84 +2
send_packet 166 168 +2
bcast_or_ucast 23 25 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
I see random field values like sll_hatype=0x267 when I strace.
They seem to not matter, but just in case they sometimes do,
let's at least have deterministic values (via memset(0)).
function old new delta
change_listen_mode 308 322 +14
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
mode_info 688 704 +16
mode_name 502 516 +14
wrapf 162 157 -5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 30/-5) Total: 25 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
packed_usage 31807 31856 +49
applet_names 2701 2708 +7
applet_main 1560 1564 +4
applet_install_loc 195 196 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 61/0) Total: 61 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
get_termios_and_make_raw - 139 +139
xget1 39 8 -31
read_line_input 3912 3867 -45
less_main 2525 2471 -54
set_termios_to_raw 116 36 -80
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/4 up/down: 139/-210) Total: -71 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
hexedit_main 1171 1170 -1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
hexedit_main 1169 1202 +33
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
hexedit_main 1176 1169 -7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
remap 173 178 +5
move_mapping_lower 107 109 +2
move_mapping_further 141 143 +2
hexedit_main 1191 1176 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 9/-15) Total: -6 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This is a must if you need to edit sector 123456789999 on your /dev/disk.
text data bss dec hex filename
922745 481 6832 930058 e310a busybox_old
923023 481 6832 930336 e3220 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
hexedit_main 998 1082 +84
restore_term - 29 +29
remap 168 173 +5
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/0 up/down: 118/0) Total: 118 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
hexedit_main 970 998 +28
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
hexedit_main 924 970 +46
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
text data bss dec hex filename
922535 481 6832 929848 e3038 busybox_old
922534 481 6832 929847 e3037 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
format_line 197 209 +12
hexedit_main 930 924 -6
redraw_cur_line 104 94 -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 12/-16) Total: -4 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
hexedit_main - 930 +930
format_line - 197 +197
remap - 168 +168
move_mapping_further - 141 +141
move_mapping_lower - 107 +107
redraw_cur_line - 104 +104
packed_usage 31802 31812 +10
applet_names 2688 2696 +8
applet_main 1552 1556 +4
applet_suid 97 98 +1
applet_install_loc 194 195 +1
------------------------------------------------------------------------------
(add/remove: 7/0 grow/shrink: 5/0 up/down: 1671/0) Total: 1671 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
setfattr_main - 189 +189
packed_usage 31516 31588 +72
setxattr - 53 +53
lsetxattr - 53 +53
removexattr - 37 +37
lremovexattr - 37 +37
applet_names 2649 2658 +9
find_applet_by_name 124 128 +4
applet_main 1532 1536 +4
------------------------------------------------------------------------------
(add/remove: 7/0 grow/shrink: 4/0 up/down: 458/0) Total: 458 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
chat_main 1356 1379 +23
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
IF_FEATURE_XARGS_SUPPORT_PARALLEL(char *opt_a = NULL;)
is replaced with
IF_FEATURE_XARGS_SUPPORT_ARGS_FILE
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The GNU-specific option -a lets xargs read the arguments from a file
rather than from stdin.
This is particularly convenient when debugging in gdb interactively,
and it might be of more general use.
function old new delta
xargs_main 788 823 +35
packed_usage 31683 31671 -12
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
I (slightly) prefer my code to be under "GPLv2 only" license.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|