Age | Commit message (Collapse) | Author |
|
function old new delta
svok_main - 127 +127
packed_usage 32705 32757 +52
applet_names 2756 2761 +5
applet_main 1588 1592 +4
bb_banner 46 47 +1
sv 1286 1284 -2
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 4/1 up/down: 189/-2) Total: 187 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When using ifplugd on a RNDIS interface with monitor mode, using
SIOCSIFFLAGS seems to fail with EADDRNOTAVAIL. Treat it the same
as if iface disappeared again.
This has been observed on a Tegra TK1 using Linux 4.14. There seem
to be a race when the kernel is creating the device:
ifplugd(usb0): started: BusyBox v1.24.1 (2018-03-27 09:47:48 CEST)
ifplugd(usb0): interface doesn't exist, waiting
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): setting interface flags failed: Cannot assign requested address
<exit>
With this patch ifplugd is successful in upping the device the second
time around:
ifplugd(usb0): upping interface
ifplugd(usb0): using SIOCETHTOOL detection mode
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): setting interface flags failed: Cannot assign requested address
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): using SIOCETHTOOL detection mode
ifplugd(usb0): link is up
ifplugd(usb0): executing '/etc/ifplugd/ifplugd.usb.action usb0 up'
ifplugd up
ifplugd(usb0): exit code: 0
function old new delta
up_iface 120 127 +7
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
For some setups (E.G. for supporting different screen resolutions),
positioning the image somewhere else than the top left corner may be
interesting.
Add support for IMG_LEFT/IMG_TOP settings to specify the image location,
similar to how it is done for the progress bar.
function old new delta
fbsplash_main 994 1038 +44
static.param_names 57 74 +17
packed_usage 32631 32647 +16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 77/0) Total: 77 bytes
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
grep_file 1461 1470 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Kernel will surely inform us in FITRIM does not make sense on a given file.
function old new delta
fstrim_main 241 221 -20
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Based on a patch by Mark Marshall <mark.marshall@omicronenergy.com>
function old new delta
dup_CLOEXEC - 49 +49
fcntl_F_DUPFD 46 - -46
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Interface may not exist because it got deleted by an ifdown hook script
earlier. This may happen when a virtual interface, such as VLAN, has multiple
iface blocks defined.
function old new delta
static_down6 14 40 +26
static_down 54 70 +16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 42/0) Total: 42 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
INET6_setroute 492 472 -20
do_iplink 1357 1330 -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-47) Total: -47 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
If we don't ask for numerical output, and the symbolic look-up failed
we used to get "(null)", but the numeric output would be better.
function old new delta
ip_port_str 109 121 +12
Signed-off-by: Mark Marshall <mark.marshall@omicronenergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The wrong character was used to indicate options taking an integer
parameter.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
-o Don't restore user:group
-k Don't replace existing files
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
text data bss dec hex filename
933035 473 6836 940344 e5938 busybox_old
933051 473 6836 940360 e5948 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
defaultpro 14 - -14
defaultmap 17 - -17
readprofile_main 1762 1719 -43
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/1 up/down: 0/-74) Total: -74 bytes
text data bss dec hex filename
933081 473 6836 940390 e5966 busybox_old
933035 473 6836 940344 e5938 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
update_local_clock 834 858 +24
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
EINTR _should_ only happen on two signals we trap, and safe_poll
_should_ work here just fine, but there were kernel bugs where spurious EINTRs
happen (e.g. on ptrace attach). Be safe.
function old new delta
udhcpd_main 1437 1468 +31
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
In other words: try to correct initially existing clock offset first,
before assuming that our clock drifts.
function old new delta
update_local_clock 826 834 +8
ntp_init 550 557 +7
filter_datapoints 179 173 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 15/-6) Total: 9 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Fixes:
commit 52a515d18724bbb34e3ccbbb0218efcc4eccc0a8
"udhcp: use poll() instead of select()"
Feb 16 2017
udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read.
In the above commit, it was changed as follows:
- if (!FD_ISSET(signal_pipe.rd, rfds))
+ if (!pfds[0].revents)
return 0;
The problem is, the check was working for select() purely by accident.
Caught signal interrupts select()/poll() syscalls, they return with EINTR
(regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked.
IOW: they can't see any changes to fd state caused by signal haldler
(in our case, signal handler makes signal pipe ready to be read).
For select(), it means that rfds[] bit array is unmodified, bit of signal
pipe's read fd is still set, and the above check "works": it thinks select()
says there is data to read.
This accident does not work for poll(): .revents stays clear, and we do not
try reading signal pipe as we should. In udhcpd, we fall through and block
in socket read. Further SIGTERM signals simply cause socket read to be
interrupted and then restarted (since SIGTERM handler has SA_RESTART=1).
Fixing this as follows: remove the check altogether. Set signal pipe read fd
to nonblocking mode. Always read it in udhcp_sp_read().
If read fails, assume it's EAGAIN and return 0 ("no signal seen").
udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR
(using safe_poll()) - thus ensuring we have correct .revents for all fds -
and calling udhcp_sp_read() only if pfds[0].revents!=0.
udhcpc performs much fewer reads (typically it sleeps >99.999% of the time),
there is no need to optimize it: can call udhcp_sp_read() after each poll
unconditionally.
To robustify socket reads, unconditionally set pfds[1].revents=0
in udhcp_sp_fd_set() (which is before poll), and check it before reading
network socket in udhcpd.
TODO:
This might still fail: if pfds[1].revents=POLLIN, socket read may still block.
There are rare cases when select/poll indicates that data can be read,
but then actual read still blocks (one such case is UDP packets with
wrong checksum). General advise is, if you use a poll/select loop,
keep all your fds nonblocking.
Maybe we should also do that to our network sockets?
function old new delta
udhcp_sp_setup 55 65 +10
udhcp_sp_fd_set 54 60 +6
udhcp_sp_read 46 36 -10
udhcpd_main 1451 1437 -14
udhcpc_main 2723 2708 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
packed_usage 32547 32550 +3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
packed_usage 32543 32547 +4
ipcs_main 1014 980 -34
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 4/-34) Total: -30 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
packed_usage 32539 32543 +4
format 1 - -1
do_shm 883 880 -3
do_sem 636 633 -3
do_msg 782 779 -3
ipcs_main 1049 1014 -35
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/4 up/down: 4/-45) Total: -41 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
handle_input 549 560 +11
top_main 889 891 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
display_process_list 1018 999 -19
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This avoids pulling in gmtime's static buffer:
function old new delta
svlogd_main 1401 1412 +11
send_headers 668 678 +10
gmtime 21 - -21
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 2/0 up/down: 21/-21) Total: 0 bytes
text data bss dec hex filename
920221 555 5804 926580 e2374 busybox_old
920221 555 5740 926516 e2334 busybox_unstripped
^^^^
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
run_pipe 1589 1591 +2
pseudo_exec_argv 374 375 +1
builtin_type 114 115 +1
find_function 8 - -8
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 3/0 up/down: 4/-8) Total: -4 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These were data/bss:
static.proc_read 1 - -1
int_list 4 - -4
int_last 4 - -4
We never call display_interfaces() twice, thus code to not scan /proc twice
never triggers.
function old new delta
do_if_print - 1998 +1998
display_interfaces 145 249 +104
static.proc_read 1 - -1
add_interface 104 103 -1
int_list 4 - -4
int_last 4 - -4
if_readlist_proc 560 542 -18
if_readconf 141 - -141
do_if_fetch 643 - -643
ife_print 1296 - -1296
------------------------------------------------------------------------------
(add/remove: 1/6 grow/shrink: 1/2 up/down: 2102/-2108) Total: -6 bytes
text data bss dec hex filename
933084 473 6844 940401 e5971 busybox_old
933087 473 6836 940396 e596c busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
ife_print 1293 1296 +3
display_interfaces 145 146 +1
if_readconf 162 141 -21
if_readlist_proc 631 560 -71
do_if_fetch 753 643 -110
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 4/-202) Total: -198 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When fetching a https:// URL with HTTP proxy configured
(e.g. with environment variable http_proxy=http://your-proxy:3128)
busybox was making a https connection to the proxy.
This was because the protocol scheme for the target URL was used to determine whether to connect to the proxy over SSL or not.
When the proxy is in use, the decision on whether to connect to the proxy over https
should based on the proxy URL not on the target URL.
function old new delta
wget_main 2381 2387 +6
Signed-off-by: Peter Lloyd <l-busybox@pgl22.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Move some distro specific include files into the appropriate #ifdef
blocks to make the code more portable.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
It turns out bkslash_in_varexp.tests was a bash bug :]
ash and hush fail "corrected" bkslash_in_varexp.tests as well,
just not as badly as I thought (hush gets half of the cases right).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-5 (-5)
Function old new delta
skip_dev_pfx 30 25 -5
Total: Before=779966, After=779961, chg -0.00%
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
tcpudpsvd_main 1775 1780 +5
ipsvd_perhost_add 108 107 -1
cclen 4 - -4
cc 4 - -4
ipsvd_perhost_init 30 25 -5
ipsvd_perhost_remove 80 44 -36
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 1/3 up/down: 5/-50) Total: -45 bytes
text data bss dec hex filename
933358 473 6852 940683 e5a8b busybox_old
933326 473 6844 940643 e5a63 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
lineedit_read_key 269 261 -8
win_changed 47 - -47
read_line_input 3884 3821 -63
cmdedit_setwidth 63 - -63
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/2 up/down: 0/-181) Total: -181 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
df_main 1065 1064 -1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Reported for Pascal Bellard.
function old new delta
df_main 1054 1065 +11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Trying to install busybox with hardlinks and a custom PREFIX will fail
for applets not in the /bin directory, because relative pathnames are
used. applets/install.sh is *supposed to* use the absolute pathname
for hardlinks but it fails to do so because the wrong check is used
in the if statement.
While fixing it, shore up other sloppy coding in applets/install.sh
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
od_main 2164 2179 +15
address_fmt 8 - -8
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/0 up/down: 15/-8) Total: 7 bytes
text data bss dec hex filename
930954 481 6852 938287 e512f busybox_old
930977 473 6852 938302 e513e busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This also makes OPT_STR reused:
text data bss dec hex filename
930979 481 6852 938312 e5148 busybox_old
930954 481 6852 938287 e512f busybox_unstripped
^^^^^^
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
compare_keys 794 795 +1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|