aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-05-29Remove _() and N_() from platform.h. #define them as NOP macros in the twoRob Landley
files still using them. I didn't remove them from e2fsck.c to avoid stomping pending cleanup patches from Garrett, and I didn't bother to remove them from fdisk.c because that entire file needs to be rewritten from scratch.
2006-05-29Remove _().Rob Landley
2006-05-29Remove _().Rob Landley
2006-05-28I changed last10 to last25, and just bumped it up to 50 so I renamed itRob Landley
"recent.html". There's a symlink from each of the old names for the moment, I'll zap those eventually...
2006-05-28Fix hdparm to use PRIu64 instead of typecasting to long long (which is 128 bitsRob Landley
on 64 bit platforms), and move #include <inttypes.h> to libbb.h.
2006-05-28Put the ending quote on the help entry...Rob Landley
2006-05-28Fix some warnings in allbareconfig.Rob Landley
2006-05-28My first bout of untangling udhcp. Make lots of gratuitous #defines goRob Landley
away, substitutie BB_VER for an external VERSION, use busybox CONFIG symbols rather than checking for them then defining others, etc. Lots more cleanup to do...
2006-05-27Move portability stuff to platform.h, and clean up adjtimex.c a bit whileRob Landley
I'm in the area.
2006-05-27Consolidate #include <sys/time.h> so libbb.h does it.Rob Landley
2006-05-27Update FAQ to mention make baseline when talking about make bloatcheck.Rob Landley
2006-05-27Consolidate the .PHONY targets and add "make baseline" for bloatcheck.Rob Landley
2006-05-27- use the defines CURRENT_TTY and VC_1; also shrink xargs a tiny bit:Bernhard Reutner-Fischer
add/remove: 0/0 grow/shrink: 2/6 up/down: 5/-37 (-32) function old new delta static.add_interface 271 274 +3 static.glob3 36 38 +2 static.renice_main 409 408 -1 static.readcmd 1083 1081 -2 static.changepath 176 174 -2 static.parse_opts 56 51 -5 static.rx_main 1095 1088 -7 static.xargs_main 759 739 -20 ---------------------------------------------------------------- Result :-) -32
2006-05-26Change llist_add_* to take the address of the list rather than returning the newRob Landley
head, and change all the callers.
2006-05-26Slight sanity fix: data is void *, not char *. And it's called dataRob Landley
almost everywhere, so be consistent.
2006-05-26- provide fallback defines for non-linuxBernhard Reutner-Fischer
2006-05-26- provide fallback defines for non-linuxBernhard Reutner-Fischer
2006-05-26- add central knob to turn off getopt_long everywhere. EXPERIMENTAL!Bernhard Reutner-Fischer
Adds "Enable getopt long" under "General options", default y. Send patches to fix getopt_ulflags and run_parts.c if you turn this off.. See http://busybox.net/lists/busybox/2006-May/021828.html for a start to run-parts
2006-05-26- use strtol instead of strtoll if the latter does not existBernhard Reutner-Fischer
- add and use wrapper for attribute - add and use replacement for vasprintf if it is unavailable
2006-05-26- introduce and use bb_path_wtmp_file for portability (saves 11 Bytes).Bernhard Reutner-Fischer
- fix last.c to also look at the double-underscore UT_ defines.
2006-05-26- use portability wrapper define bb_setpgrp.Bernhard Reutner-Fischer
2006-05-26- work around bug in gcc-3.4.x on ARMBernhard Reutner-Fischer
2006-05-26- move llist to top of file so we can potentially use it in all prototypes ↵Bernhard Reutner-Fischer
easily
2006-05-26- make find_mount_point conditional on df and eject; Fixes `make hosttools´ onBernhard Reutner-Fischer
hosts where mntent.h does not exist.
2006-05-26- add workaround for tar being broken since it uses a non-portable constant.Bernhard Reutner-Fischer
2006-05-26- use the SED given by the userBernhard Reutner-Fischer
- use the portable `` instead of $(). There is no bbsh, so this is needed.
2006-05-26- add target hosttools (see make help)Bernhard Reutner-Fischer
- rename check_gcc to check_cc and pass the CC to use as arg#1; peruse check_cc for HOSTCFLAGS - add and use check_strip - add checks for {,no-}whole-archive and {start,end}-group LD flags
2006-05-26- use ATTRIBUTE_ALWAYS_INLINE if requestedBernhard Reutner-Fischer
- use shorter boilerplate while at it
2006-05-26- move libc checks from busybox.h to platform.hBernhard Reutner-Fischer
- add ATTRIBUTE_ALWAYS_INLINE, endian handling for DEC UNIX, some more compiler dependent defines to platform.h - add conditional bb_setpgrp define to platform.h - remove superfluous specifying args from "#define fdprintf dprintf"
2006-05-26- patch from Tito to pretty print the overall deltaBernhard Reutner-Fischer
2006-05-26Yann E. MORIN. writes:Mike Frysinger
hdparm has a uint64_t passed to printf with a %llu format (which is ok, because it's the same size), but without first being casted(?) to unsigned long long int. Which is kinda funny because it's done OK on a few lines above...
2006-05-26errno and h_errno values are not the same #876 by rfelkerMike Frysinger
2006-05-26fix spelling mistakesMike Frysinger
2006-05-26check for queueing dependancy dependancies typosMike Frysinger
2006-05-26queuing is spelled correctlyMike Frysinger
2006-05-25Rich Felker suggested removing dprintf() from watch, and one thing led toRob Landley
another... This adds bb_xspawn() support, which does vfork/exec. (I don't know why using a static instead of a local adds ~40 bytes, but using the local doesn't work...)
2006-05-25And fix the error I just introduced. :)Rob Landley
2006-05-25Remove pointless #define.Rob Landley
2006-05-25Patch from Tito:Rob Landley
Remove -v verbose -V version -q quiet flags Remove parse_opt_v2(); Rename parse_opt_v3() to parse_xfermode() Remove if_strcat() Rearrange code in  dump_identity() to reduce size Modify some strings so that they could be optimized by the compiler Minor code clean up Remove unneeded #define <shm.h> #if BB_BIG_ENDIAN && !defined(__USE_XOPEN) # define __USE_XOPEN #endif     Must be before #include <unistd.h> and #include "busybox.h" (noticed by Bernhard Fischer <rep.nop@aon.at>) Remove duplicate code in do_time()
2006-05-25Remove a pointless #define.Rob Landley
2006-05-25make the testsuite a little less brittle:Bernhard Reutner-Fischer
- 'function fn_name\n{' breaks on older FreeBSD default shells, so use the more widely supported 'fn_name () {'. This needs more fixing.. - test for integers ought to use the proper operators - test for strings ought to use quoting of the strings to be fair to strange implementations of test(1) - make sure not to ignore return-codes != 0 from commands; Some shells exit immediately on this (much like explicitely requesting set -e in e.g. bash) TODO: *) Some older shells do not allow a space after the test-condition in an "if" statement. This doesn't work: if [ $status -ne 0 ] ; then as opposed to this: if [ $status -ne 0 ]; then or this if [ $status -ne 0 ] then *) strict spacing between commands. In some shells you have to say: foo ; bar ; baz The affected shells barf on stuff like ommitting the space, so this doesn't work: foo; bar ;baz *) $() vs. `` The former isn't really portable as opposed to the latter. *) fix frong assumption that the testsuite is run from the source-dir. This is a complete misconception and renders the testsuite completely useless. That said, i note that IMO a test-harness ought to do it's best to work in a wide variety of environments, everything else defeats it's purpose.
2006-05-24Two more issues pointed out by Bernhard.Rob Landley
2006-05-24Yann Morin spotted some leftover flotsam from halfway through the recentRob Landley
llist.c interface change that accidentally got checked in. My bad.
2006-05-23It takes _talent_ to implement a version of nohup that does everything exceptRob Landley
the actual blocking of HUP.
2006-05-21- set x bitBernhard Reutner-Fischer
2006-05-21Convert to a global struct, the way sed was. Now I have two, I can work outRob Landley
the infrastructure to merge global structs into a union...
2006-05-21Minor cleanups: Convert a few calloc() calls to xzalloc, remove unnecessaryRob Landley
memset, collate variable declarations...
2006-05-21New version of nohup that's much smaller, less paranoid, consistent,Rob Landley
vaguely portable, and licensed GPLv2 "or later".
2006-05-21- fix wrong path to scripts/usage; It is in the builddir and not in the srcdir.Bernhard Reutner-Fischer
- flag .depend as .NOTPARALLEL to workaround bug in make-3.80 and make-3.81 Some more details on the second workaround (i.e. kludge): make-3.80 silently fails, while make-3.81 is at least self-conscious enough to admit: include/usage_compressed.h: .config scripts/usage # Implicit rule search has not been done. # File does not exist. # File has not been updated. # Dependencies commands running (THIS IS A BUG). # commands to execute (from `/home/cow/src/bb2/Makefile', line 430): $(Q)$(SHELL) $(top_srcdir)/scripts/usage_compressed "$(top_builddir)/scripts" > $@ I'm giving up on trying to run the rest of the prerequisites of .depend in parallel and just (try to) indicate that the prerequisites of .depend are not to be run in parallel. While this makes `make distclean defconfig;make -j´ work for me, it is not a real -- longterm -- solution; FIXME
2006-05-21- check for existing usage binary, so it get's more obvious that the toplevelBernhard Reutner-Fischer
Makefile uses the wrong path to the binary (it's in top_builddir and not in top_srcdir)