aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2003-08-05Merge/rework config system per the latest from linux-2.6.0-test2.Eric Andersen
Fix the config bugs revealed by the updated config system. -Erik
2003-08-02Might as well get my name in AUTHORS before 1.0...Manuel Novoa III
2003-08-02Save 0.5K.Manuel Novoa III
2003-08-01Remove code that too agressively disabled inlinesEric Andersen
2003-07-31Minor cleanupEric Andersen
2003-07-31Fix bug when handling debian packages.Glenn L McGrath
If we read the contents of compressed files within the ar archive, e.g. control.tar.gz, then file position gets all out of whack, so it has to be reset before reading thenext header.
2003-07-30Remove LRP (now defunct) and replace it with leaf.Eric Andersen
2003-07-30Update webpage and changelog for releaseEric Andersen
2003-07-30Lars Ekman writes:Eric Andersen
When using "losetup" the device is always setup as Read-Only. (I have only tested with the -o flag, but looking at the code the problem seems general) The problem is the "opt" variable in "losetup.c" that is reused in the "set_loop()" call. Clear it before the call and everything is OK; opt = 0; /* <-------- added line */ if (delete) return del_loop (argv[optind]) ? EXIT_SUCCESS : EXIT_FAILURE; else return set_loop (argv[optind], argv[optind + 1], offset, &opt) ? EXIT_FAILURE : EXIT_SUCCESS; } Best Regards, Lars Ekman
2003-07-30last_patch100 from vidz updating fdisk to 2.12preEric Andersen
2003-07-30Do not require that the signal number be specifiedEric Andersen
2003-07-30Eric Spakman writes:Eric Andersen
The recent changes in ifupdown where all calls to 'ip link set' and 'ip addr set' are swapped give some problems with v4tunnels. For plain ipv4 and ipv6 interfaces it works correct, other methods not tried. The patch below change the behaviour back for v4tunnels only. Without the patch the following errors are shown: RTNETLINK answers: Network is down RTNETLINK answers: No route to host and the tunnel is not fully brought up With this patch all works as expected.
2003-07-30Vladimir N. Oleynik writes:Eric Andersen
This moment have algoritmicaly problem, not overflow: strcat(wrapped, wrapped) - may be looped. Hand patch: - else if (strstr(strcat(wrapped, wrapped), newmono)) + else { + safe_strncpy(wrapped + lenwrap, wrapped, lenwrap + 1); + if (strstr(wrapped, newmono)) +} --w vodz
2003-07-30Christian Meyer provided this patch to fix more bugs with the tftp clientEric Andersen
2003-07-30Ronny L Nilsson writes:Eric Andersen
The login process should always timeout if user don't login sucessfully within reasonable time. Otherwise we're sensetive to a DOS attack by simply doing a bunch of simultaneous telnet connections (deploys all availible TTY's). This patch make login.c terminate the connection after "TIMEOUT" seconds.
2003-07-30Ronny L Nilsson writes:Eric Andersen
If BusyBox was compiled with -DCONFIG_FEATURE_CLEAN_UP dmesg command segfaults if invoked with the "-n" option. (Due to a free() of an uninitialized pointer).
2003-07-29Set libbb dead last in the link orderEric Andersen
2003-07-29Match up interfacesEric Andersen
2003-07-29Fixup typo noticed by Nick FedchikEric Andersen
2003-07-29Bruno Randolf writes:Eric Andersen
this patch fixes run_parts when it's called by ifupdown. 1) argv has to be a NULL terminated char* array, not just a string. 2) run_parts now explicitly sets the environment. this environment is populated from the /etc/network/interfaces config file and is needed by the scripts in /etc/network/if-pre-up.d/. when run-parts is called from the command line the environment is taken from the current process. Vladimir Oleynik then wrote: You can simplify this if use: + bb_xasprintf(&buf[0], "/etc/network/if-%s.d", opt); + buf[1] = NULL; + + run_parts(&buf, 2, environ); + free(buf[0]); --w vodz
2003-07-29Vladimir N. Oleynik writes:Eric Andersen
Last patch have synced form Manuel Nova III xxreadtoken() function, corrected (C) form dash debian/copyright, removed my small mistake with IFS_BROKEN (thanks by Herbert), and synced cmdedit.c from current CVS (removed libc5 support, your email correction, my (C) year corertion).
2003-07-29Yang Xiaopeng writes:Eric Andersen
>I'm sure that no user process use old root now, but when run "umount >/old_root", it says: > umount: /old_root: Device or resource busy > >I have tried to remount /proc within the new root *after* chroot, but >get the same result. > > I found the problem, I said that no user process use old root when run my scripts, but I'm wrong, actually there is a '3' fd open the file "/old_root/dev/console". By adding debug message in init/init.c, I found the problem: when init restart(in exec_signal()), before open the new terminal device, there is still a file opened(I don't know which file it is), so the terminal device(stdin) get fd '1', and the first dup(0)(stdout) return '2', the second(stderr) return '3'. I attach a simple patch to solve this problem.
2003-07-28bump version to 1.0.0-pre2Eric Andersen
2003-07-28A small update to the new docs. Plenty more is needed...Eric Andersen
2003-07-28Patch from vodz to update httpd usageEric Andersen
2003-07-28This is synced from dash-0.4.17 and full ready for insert to new busyboxEric Andersen
version: ftp://ftp.simtreas.ru/pub/my/bb/new News: - code is smalest! - support ${var...} expr - used new very strongly steal controlling terminal
2003-07-28Avoid shadowing built-in function `log'Eric Andersen
2003-07-28Fixup bugs in last patchEric Andersen
2003-07-28Update docs a bitEric Andersen
2003-07-28last_patch98 from vodz:Eric Andersen
Denis, ># ./busybox env - echo zzz >zzz ># ./busybox echo -n zzz >zzz ># ./busybox env - echo -n zzz >env: invalid option -- n > > obviously, env tried to understand -n as env's option > instead of blindly passing it to echo... > >BusyBox v1.00-pre1 (2003.07.16-07:53+0000) multi-call binary > >Usage: env [-iu] [-] [name=value]... [command] Ah, you found very old problem. Last patch also have: - multiple "-u unsetenv" support - GNU long option support - save errno after exec failed before bb_perror_msg() --w vodz
2003-07-28last_patch95 from vodz:Eric Andersen
Hi. Last patch have new libbb function vfork_rexec() for can use daemon() to uClinux system. This patched daemons: syslog, klogd, inetd, crond. This not tested! I havn`t this systems. Also. Previous patch for feature request MD5 crypt password for httpd don`t sended to this mailist on 07/15/03 (mailist have Pytom module problem?). The previous patch included, and have testing. --w vodz
2003-07-28Add a "search google" buttonEric Andersen
2003-07-28James Petterson writes:Eric Andersen
I've found a possible bug in libbb/interface.c, in function if_readlist_proc(). This function calls get_name(), and passes as an argument 'name', a buffer of 16 bytes (IFNAMSIZ). The function get_name(), however, may use more than 16 bytes, when it is searching for aliases. Even if you don't have an alias interface, you can run into trouble if the interface has received more than 99999999 bytes, in which case the space between the interface name and the rx stats disappears, as in the /proc/net/dev example below: wan0.200:264573315 462080 ... In this case get_name() correctly identifies the interface name as "wan0.200", but to do that it uses 18 bytes of the 'name' buffer, which could lead to an unpredictable error. A simple solution would be to increase the size of the buffer:
2003-07-26There should be only one instance of CONFIG_FEATURE_AUTOWIDTHEric Andersen
2003-07-26Allow people to use the full blown iproute2 programs with busybox ifupdown.Eric Andersen
2003-07-26Move start_stop_daemon to debianutils.Eric Andersen
Cleanup run_parts a bit and add long opts
2003-07-26cleanup and add long optionsEric Andersen
2003-07-26The logger utility does not really depend on CONFIG_SYSLOGD,Eric Andersen
since it can also be used with other syslog daemons -Erik
2003-07-26Patch from Christian Meyer:Eric Andersen
The client gives up way too soon because timeout is set to 0 ... There's a solution for that problem.
2003-07-26Some additional description based on a patch from Terje KvernesEric Andersen
2003-07-26Patch from Nick Fedchik to fixup paths in busybox/libpwdgrpEric Andersen
which were not properly using the bb_path_*_file strings.
2003-07-26Rework kill / killall so it behaves itself, even when subjectedEric Andersen
to abuse. -Erik
2003-07-26Patch from Thomas Gleixner to reap any zombie processes that areEric Andersen
reparented to init...
2003-07-26Don't depend on CONFIG_LFS. It is really a suggestion, not a requirement,Eric Andersen
since fdisk will work just fine on smaller disks w/o it.
2003-07-23Set the tm_isdst flag to -1 before calling mktime(). Otherwise, the currentManuel Novoa III
timezone setting is used for the new date.
2003-07-22eliminate DOSTATIC, DODEBUG, etc and name them sensiblyEric Andersen
2003-07-22Several simplifications and indenting changes, perEric Andersen
last_patch97 from vodz
2003-07-22As vodz noticed, I screwed up rebootEric Andersen
2003-07-22the word "only" is repeated for CONFIG_FEATURE_SHADOWPASSWDSEric Andersen
2003-07-22There is no need to expose CONFIG_FEATURE_TRACEROUTE_SO_DEBUGEric Andersen