aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-27udhcp6: move misplaced commentDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-27udhcp6: fix releasingDenys Vlasenko
Patch is based on work by tiggerswelt.net. They say: " We wanted udhcpc6 to release its IPv6-Addresses on quit (-R-commandline-option) which turned out to generate once again kind of garbage on the network-link. We tracked this down to two issues: - udhcpc6 uses a variable called "srv6_buf" to send packets to the dhcp6-server, but this variable is never initialized correctly and contained kind of a garbage-address - The address of the dhcp6-server is usually a link-local-address, that requires an interface-index when using connect() on an AF_INET6- socket We added an additional parameter for ifindex to d6_send_kernel_packet() and made d6_recv_raw_packet() to capture the address of the dhcp6-server and forward it to its callee. " Three last patches together: function old new delta d6_read_interface - 454 +454 d6_recv_raw_packet - 283 +283 option_to_env 249 504 +255 .rodata 165226 165371 +145 send_d6_discover 195 237 +42 send_d6_select 118 159 +41 send_d6_renew 173 186 +13 send_d6_release 162 173 +11 opt_req - 10 +10 d6_send_kernel_packet 304 312 +8 opt_fqdn_req - 6 +6 d6_mcast_from_client_config_ifindex 48 51 +3 d6_find_option 63 61 -2 udhcpc6_main 2416 2411 -5 static.d6_recv_raw_packet 266 - -266 ------------------------------------------------------------------------------ (add/remove: 5/1 grow/shrink: 8/2 up/down: 1271/-273) Total: 998 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-27udhcp6: fix problems found running against dnsmasqDenys Vlasenko
Patch is based on work by tiggerswelt.net. They say: " But when we tried to use dnsmasq on server-side, udhcpc6 was unable to forward the acquired address to its setup-script although the IPv6-Address had been assigned by the server as we could see via tcpdump. We traced this issue down to a problem on how udhcpc6 parses DHCPv6-Options: When moving to next option, a pointer-address is increased and a length buffer is decreased by the length of the option. The problem is that it is done in this order: option += 4 + option[3]; len_m4 -= 4 + option[3]; But this has to be switched as the length is decreased by the length of the *next* option, not the current one. This affected both - internal checks if a required option is present and the function to expose options to the environment of the setup-script. There was also a bug parsing D6_OPT_STATUS_CODE Options, that made dnsmasq not work as udhcpc6 thought it is receiving a non-positive status-code (because it did not parse the status-code as required in RFC 3315). In addition we introduced basic support for RFC 3646 (OPTION_DNS_SERVERS and OPTION_DOMAIN_LIST) and RFC 4704 (OPTION_CLIENT_FQDN). " Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-27udhcp6: read_interface should save link-local ipv6 addressDenys Vlasenko
Patch is based on work by tiggerswelt.net. They say: "Using this patch it was no problem to acquire an IPv6-Address via DHCPv6 using ISC DHCPD6 on server-side." Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-24vi: avoid touching a new file with ZZ when no editing has been doneYousong Zhou
This is the behaviour observed with standard vim and busybox vi of at least 1.22.1. It was changed with commit "32afd3a vi: some simplifications" which happened before 1.23.0. Mistyping filename on command line happens fairly often and it's better we restore the old behaviour to avoid a few unnecessary flash writes and sometimes efforts of debugging bugs caused by those unneeded stray files. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-24switch_root: don't bail out when console doesn't existAndrei Gherzan
Busybox is very often used in initramfs at the end of which usually there is a switch_root to the actual rootfs. There are many cases where the console kernel argument is either just a placeholder (for example RaspberryPi uses serial0 and serial1) or configured as null to avoid any console messages - usually you would see such of a setup in production environments. Currently busybox bails out if can't open the console argument. If this happenes in initramfs and if the console=null for example, you get in a blind kernel panic. Avoid this by only warning instead of dying. function old new delta switch_root_main 371 368 -3 Signed-off-by: Andrei Gherzan <andrei@gherzan.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-24whitespace fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-23paste: delimiter list use should restart for each new output lineDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-23typo fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-23paste: new appletMaxime Coste
function old new delta paste_main - 493 +493 packed_usage 31019 31070 +51 applet_names 2569 2575 +6 applet_main 1484 1488 +4 ------------------------------------------------------------------------------ (add/remove: 2/0 grow/shrink: 3/0 up/down: 554/0) Total: 554 bytes Signed-off-by: Maxime Coste <mawww@kakoune.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-16dd: call fsync() only once before exiting if conv=fsync is specifiedRostislav Skudnov
Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-16Revert "umount: make -d always active, add -D to suppress it"Denys Vlasenko
This reverts commit 86a03bee1d3d6990c03bf500836b19ec8a1c1f12. Since now our "mount -oloop" creates AUTOCLEARed loopdevs, we no longer need our umount to destroy loopdevs to match the usual util-linux behaviour. Now this revert fixes another, opposite bug: "explicit" mount /dev/loopN and then umount must not drop loopdevs! User complaint is as follows: It seems LOOP_CLR_FD called on a loop-*partition* removes the mapping of the whole *device* - which results in the following: root@LEDE:/# loop=$(losetup -f) root@LEDE:/# echo ${loop} /dev/loop2 root@LEDE:/# losetup ${loop} /IMAGE root@LEDE:/# ls -l ${loop}* brw------- 1 root root 7, 2 Mar 6 20:09 /dev/loop2 root@LEDE:/# partprobe ${loop} root@LEDE:/# ls -l ${loop}* brw------- 1 root root 7, 2 Mar 6 20:09 /dev/loop2 brw------- 1 root root 259, 8 Mar 6 21:59 /dev/loop2p1 brw------- 1 root root 259, 9 Mar 6 21:59 /dev/loop2p2 brw------- 1 root root 259, 10 Mar 6 21:59 /dev/loop2p3 brw------- 1 root root 259, 11 Mar 6 21:59 /dev/loop2p4 brw------- 1 root root 259, 12 Mar 6 21:59 /dev/loop2p5 brw------- 1 root root 259, 13 Mar 6 21:59 /dev/loop2p6 brw------- 1 root root 259, 14 Mar 6 21:59 /dev/loop2p7 brw------- 1 root root 259, 15 Mar 6 21:59 /dev/loop2p8 root@LEDE:/# mount ${loop}p8 /MOUNT # mount loop partition root@LEDE:/# losetup -a | grep $loop # loop dev mapping still there /dev/loop2: 0 /mnt/IMAGE root@LEDE:/# strace umount /MOUNT 2> /log # unmount loop partition root@LEDE:/# losetup -a | grep ${loop} # loop device mapping is gone root@LEDE:/# grep -i loop /log open("/dev/loop2p7", O_RDONLY|O_LARGEFILE) = 3 ioctl(3, LOOP_CLR_FD) = 0 root@LEDE:/# The strace was done to figure out, if maybe umount wrongly ioctl()'s the parent device instead of the partition - it doesn't. I already wasn't a fan of umount implicitly removing the mapping in the first place (as I usually setup and release loop devices with `losetup` and scripts needed to call umount differently in order to work and outside busybox). However taking above (kernel-)behaviour into account - umount calling ioctl(LOOP_CLR_FD) unconditionally potentially causes some nasty side effects Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-16mount: create loop devices with LO_FLAGS_AUTOCLEAR flagDenys Vlasenko
The "autolooped" mount (mount [-oloop] IMAGE /DIR/DIR) always creates AUTOCLEARed loopdevs, so that umounting drops them (and this does not require any code in the umount userspace). This happens since circa linux-2.6.25: commit 96c5865559cee0f9cbc5173f3c949f6ce3525581 Date: Wed Feb 6 01:36:27 2008 -0800 Subject: Allow auto-destruction of loop devices IOW: in this case, umount does not have to use -d to drop the loopdev. The explicit loop mount (mount /dev/loopN /DIR/DIR) does not do this. In this case, umount without -d should not drop loopdev. Unfortunately, bbox umount currently always implies -d, this probably needs fixing. function old new delta set_loop 537 597 +60 singlemount 1101 1138 +37 losetup_main 419 432 +13 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 110/0) Total: 110 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-13runit: fix chpst -n -N -u USERDenys Vlasenko
busybox's chpst first switches user/group and then tries to call nice(). Once the root priviledges are dropped, process priority can only be lowered. So negative nice values don't work anymore. Upstream version of chpst correctly calls nice() before switching user. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-03-13vi: don't touch file with :x when modified_count == 0Denys Vlasenko
Along with it, there are other changes - Check for uppercase X is removed as the expression will be always false and :X itself is another totally different command in standard vim - The status line will show number of written lines instead of lines requested by the colon command. This is also how the standard vim is doing, though the difference is that '!' has to be explicitly specified in vim to allow partial writes Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-17reset: before calling execvp(), reset needs to flush stdoutGlenn Matthews
Signed-off-by: Glenn Matthews <glmatthe@cisco.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-17Fix FEATURE_{GZIP,BZIP2}_DECOMPRESS link errorKang-Che Sung
... when gzip is selected but not gunzip nor zcat, or when bzip2 is selected but not bunzip2 nor bzcat. This regression is introduced in b130f9f758b6404c6d0911a1c120937ae6ab47f8 ("Allow 'gzip -d' and 'bzip2 -d' without gunzip or bunzip2") Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-17udhcpc: make sure we do not overflow poll timeoutDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-17nc_bloaty: use poll() instead of select()Denys Vlasenko
function old new delta readwrite 829 715 -114 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-16udhcp: use poll() instead of select()Denys Vlasenko
function old new delta udhcp_sp_read 65 46 -19 udhcp_sp_fd_set 79 54 -25 udhcpd_main 1530 1482 -48 udhcpc_main 2780 2730 -50 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-142) Total: -142 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-16udhcp: do not clobber errno by signal handlerDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-16nc: use poll() instead of select()Denys Vlasenko
function old new delta nc_main 943 866 -77 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-16tls: covert i/o loop from using select() to poll()Denys Vlasenko
function old new delta tls_run_copy_loop 377 282 -95 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-12sendmail: allow "+" symbol in recipient. Closes 9646Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-12modprobe-small: define and use DEPMOD_OPT_n (option mask)Kang-Che Sung
Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-12modprobe-small: document '-n' in depmod usageKang-Che Sung
Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-07modprobe_small: if only MODPROBE and DEPMOD are selected, no need to test ↵Denys Vlasenko
for them function old new delta modprobe_main 321 306 -15 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-05Reorder modutils config options & fix yet more dependencyKang-Che Sung
- modprobe can indirectly benefit from FEATURE_2_4_MODULES and FEATURE_INSMOD_TRY_MAP options. - The position of config FEATURE_INSMOD_TRY_MMAP prevented some other config options from indenting under FEATURE_2_4_MODULES. Reorder to fix this. - FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is now moved to Config.src under "Common options" section. (I wished to edit this config so that it also work with "big" modutils, but it's not done at the moment. Sorry.) Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-05modutils: fix config options dependency (2)Kang-Che Sung
- The modprobe-small implementation of rmmod no longer chdir's to "/lib/modules/`uname -r`" as it was not necessary for rmmod's operation. (And it no longer need to die if such modules directory doesn't exist.) - Configs DEFAULT_MODULES_DIR and DEFAULT_DEPMOD_FILE no longer depend on MODPROBE_SMALL as the latter may not enable depmod or modprobe that requires these configs. - Clarify DEFAULT_DEPMOD_FILE's description regarding the ".bb" name suffix. Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-04httpd: use "Content-Length", not "-length"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-04Replace int -> uint to avoid signed integer overflowRostislav Skudnov
An example of such an error (should be compiled with DEBUG_SANITIZE): runtime error: left shift of 1 by 31 places cannot be represented in type 'int' Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-04tls: fold AES CBC en/decryption into single functionsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-03wget/tls: session_id of zero length is ok (arxiv.org responds with such)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-03ash: add INT_OFF/ON around allocationsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-02ps: avoid -o stat to contain spaces. Closes 9631Denys Vlasenko
function old new delta procps_scan 1227 1236 +9 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-01cmdline module options can be disabled on "big" modutilsKang-Che Sung
Allow module options on command line to be disabled on "big" modutils. Config FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is renamed to FEATURE_CMDLINE_MODULE_OPTIONS and no longer depends on !MODPROBE_SMALL (I'm not sure if disabling this is useful on "big" modutils, but at least the macro can serve as a marker and ensure both implementations of same feature have consistent behavior.) Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-01modutils: remove redundant "select PLATFORM_LINUX" configsKang-Che Sung
It is enough to have only applets' configs select PLATFORM_LINUX. Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-01modprobe-small: move lsmod code out of modprobe_main()Kang-Che Sung
Having lsmod code inside modprobe_main() makes some of the applet name checking code awkward. Besides, this make busybox x86_64 binary a few bytes smaller. :) function old new delta lsmod_main - 23 +23 modprobe_main 599 564 -35 ------------------------------------------------------------------- (add/remove: 1/0 grow/shrink: 0/1 up/down: 23/-35) Total: -12 bytes Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-01modprobe-small: improve config help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-31ash: improve / fix glob expansionFelix Fietkau
When using musl libc glob() a very long string can cause glob() to fail, which leads to an out of memory error being raised by ash. This can happen easily if a very long quoted string contains *, even though no glob expansion should ever be performed on it (since it's quoted). Fix this by properly parsing control characters and escaping and only accept unquoted metacharacters. While we're at it, unify this check for libc and built-in glob expansion Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-30taskset: simplify code a bit; tweak --helpDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-30modprobe-small: fix --help texts, they are from "big" modutilsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-30modutils: fix config options dependencyKang-Che Sung
module.aliases and module.symbols files have no use in modprobe-small implementation. So FEATURE_MODUTILS_ALIAS and FEATURE_MODUTILS_SYMBOLS will depend on !MODPROBE_SMALL. The try_to_mmap_module() function is not called in modprobe-small.c, so I will let FEATURE_INSMOD_TRY_MMAP depend on !MODPROBE_SMALL for now. Signed-off-by: Kang-Che Sung <explorer09@gmail.com> Likewise, FEATURE_2_4_MODULES is not used by modprobe-small. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-30wget: add a big explanation what TLS code implements and what does notDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-30libbb: match_fstype() is unreadable in the extreme, fixing itDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-29vi,fsck: do not use build timestamp unconditionally. Closes 9626Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-29taskset: separate "current" and "new" stringsDenys Vlasenko
Better for constant sharing: text data bss dec hex filename 912997 485 6856 920338 e0b12 busybox_old 912988 485 6856 920329 e0b09 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-29typo in commentDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-29taskset: rewrite to be task size-agnosticDenys Vlasenko
function old new delta packed_usage 31130 31190 +60 taskset_main 623 525 -98 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/1 up/down: 60/-98) Total: -38 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-29*: add comment about APPLET_ODDNAME formatDenys Vlasenko
It confused me more than once Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>