aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-24i2cdump: don't use common_bufsiz1Bartosz Golaszewski
Commit e6a2f4cc changed the way common_bufsiz1 works. Now it needs to be initialized before using, but i2cdump wasn't updated by said patch. Since the fact that we're using common_bufsiz1 here isn't obvious (no G_INIT() macro, no other global variables), drop it and simply allocate the integer array required for block reads on the stack. Tested with i2c block read on a Lenovo Thinkpad laptop. Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-23ping: populate icmp_id field for "simple" ping tooJonas Danielsson
The ICMP RFC says that identifier and sequence number may be zero. Having them zero for a Echo message, along with a data of zero's as well will result in a Echo reply message with only zero's. Some NAT implementations seem to get the checksum wrong on these packages. Setting a checksum of 0x0 instead of 0xffff. Through NAT: Internet Control Message Protocol Type: 0 (Echo (ping) reply) Code: 0 Checksum: 0x0000 [incorrect, should be 0xffff] Identifier (BE): 0 (0x0000) Identifier (LE): 0 (0x0000) Sequence number (BE): 0 (0x0000) Sequence number (LE): 0 (0x0000) Data (56 bytes) Data: 000000000000000000000000000000000000000000000000... [Length: 56] Without NAT: Internet Control Message Protocol Type: 0 (Echo (ping) reply) Code: 0 Checksum: 0xffff [correct] Identifier (BE): 0 (0x0000) Identifier (LE): 0 (0x0000) Sequence number (BE): 0 (0x0000) Sequence number (LE): 0 (0x0000) [Request frame: 189] [Response time: 0.024 ms] Data (56 bytes) Data: 000000000000000000000000000000000000000000000000... [Length: 56] And this in turn will make some hardware MAC checksum offloading engines drop the packet. (This was seen with a Synopsis MAC, the same one used in for instance the stmmac Ethernet driver in the linux kernel.) This change can be seen as a workaround for bugs in other layers. But just setting an identifier for the Echo message packet will avoid prodding the hornets nest. function old new delta common_ping_main 424 500 +76 Signed-off-by: Jonas Danielsson <jonasdn@axis.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-22Start 1.26.0 development cycleDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-22Bump version to 1.25.0Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-21libarchive: fix xmalloc_open_zipped_read_close()Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20setsid: fix broken -cDenys Vlasenko
This did not work: setsid sh -c 'anything' Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20typo fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20scripts/trylink: libbusybox fixDenys Vlasenko
gcc 6.1.1 can emit empty line with spaces Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20libarchive: fix open_zipped()Denys Vlasenko
Last commit broke it (on both MMU and NOMMU) Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20libarchive: fix xmalloc_open_zipped_read_close() on NOMMUDenys Vlasenko
The somewhat new "unpack in memory" code was broken for xmalloc_open_zipped_read_close() on NOMMU: we seek back over signature, but then expect it to be already consumed. Stop seeking back in this case. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20randomconfig fixes 5: false positive for tar; mount emits corrupted messageDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20modprobe-small: fix bogus handling of unpack errorsDenys Vlasenko
"modprobe minix; echo $?" Was: modprobe: corrupted data modprobe: read error from 'kernel/fs/minix/minix.ko.xz': No such file or directory modprobe: corrupted data modprobe: read error from 'kernel/fs/minix/minix.ko.xz': No such file or directory modprobe: corrupted data modprobe: read error from 'kernel/fs/minix/minix.ko.xz' modprobe: 'kernel/fs/minix/minix.ko.xz': Success 0 Now: modprobe: corrupted data modprobe: read error from 'kernel/fs/minix/minix.ko.xz' 1 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20randomconfig fixes 4Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-20randomconfig fixes 3Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-19randomconfig fixes 2Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-19randomconfig fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-19libbb: move common code into run_applet_and_exitRon Yorston
Both calls to run_applet_and_exit are followed by the same code to print an error message and return status 127. Remove this duplication and make run_applet_and_exit static. function old new delta run_applet_and_exit 675 667 -8 main 119 92 -27 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-35) Total: -35 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-18Allow "busybox <applet>" to work when busybox is disabledRon Yorston
A recent commit made it possible to disable BusyBox's --install and --list options. However it also stopped "busybox <applet> <params>" from working. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-06ntpd: retry initial DNS resolution (forever, no timeout for now).Denys Vlasenko
Some users start ntpd on boot, and don't babysit it. If it dies because DNS is not yet up and therefore NTP servers can't be found, users are not happy. Example behavior with a peer name which can't be resolved: ntpd: bad address 'qwe.rty.ghj.kl' ...5 sec... ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ... Based on the patch by Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi> function old new delta resolve_peer_hostname - 81 +81 ntpd_main 1130 1061 -69 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/1 up/down: 81/-69) Total: 12 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-05-31libbb: fix time parsing of [[CC]YY]MMDDhhmm[.SS]. Closes 8951Natanael Copa
If SS is not given a value, it is assumed to be zero. http://pubs.opengroup.org/onlinepubs/9699919799/utilities/touch.html Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-05-31Make busybox an optional appletDenys Vlasenko
If it's disabled, code shrinks by about 900 bytes: function old new delta usr_bin 10 - -10 usr_sbin 11 - -11 install_dir 20 - -20 applet_install_loc 184 - -184 run_applet_and_exit 686 21 -665 ------------------------------------------------------------------------------ (add/remove: 0/4 grow/shrink: 0/1 up/down: 0/-890) Total: -890 bytes text data bss dec hex filename 911327 493 7336 919156 e0674 busybox_old 909848 493 7336 917677 e00ad busybox_unstripped but busybox executable by itself does not say anything useful: $ busybox busybox: applet not found Based on the patch by Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-05-27cp: add -u/--update and --remove-destinationDenys Vlasenko
Based on the patch by wdlkmpx@gmail.com function old new delta copy_file 1546 1644 +98 add_partition 1270 1362 +92 ask_and_unlink 95 133 +38 do_iproute 132 157 +25 decode_one_format 710 715 +5 cp_main 369 374 +5 ubirename_main 198 202 +4 read_package_field 232 230 -2 bb_make_directory 421 412 -9 packed_usage 30505 30476 -29 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 7/3 up/down: 267/-40) Total: 227 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-05-26arping: avoid use of ether_ntoa(). Closes 8926Denys Vlasenko
This is the only non-debug use of ether_ntoa(). By not using it, we reduce bss: function old new delta arping_main 1568 1665 +97 static.asc 18 - -18 ether_ntoa 57 - -57 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 1/0 up/down: 97/-75) Total: 22 bytes text data bss dec hex filename 911020 493 7352 918865 e0551 busybox_old 911069 493 7336 918898 e0572 busybox_unstripped Also, "standard" arping zero-pads MAC. ether_ntoa() does not. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-05-06sed: fix append command to match GNU sed 4.2.1Denys Vlasenko
This closes one testcase failure Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-24flock: merge spawn_and_wait() code patchs for -c and sans-c usesDenys Vlasenko
function old new delta flock_main 334 319 -15 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-24flock: fix -c; improve error handling of fork+execDenys Vlasenko
function old new delta flock_main 254 334 +80 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-24ip: fix problem on mips64 n64 big endian musl systemsSzabolcs Nagy
Use designated initializers for struct msghdr. The struct layout is non-portable and musl libc does not match what busybox expects. Signed-off-by: Szabolcs Nagy <nsz@port70.net> Tested-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-24sed: understand \n,\r and \t in i and a commands. Closes 8871Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-24generate_BUFSIZ.sh: yet another tweakDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22*: slap on a few ALIGN1/2s where appropriateDenys Vlasenko
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map" text data bss dec hex filename 829901 4086 1904 835891 cc133 busybox_before 829665 4086 1904 835655 cc047 busybox Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22scripts/trylink: document DATA_SEGMENT_ALIGN() hackDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22generate_BUFSIZ.sh: catch BUFSIZE < 1024 also on "big" buildsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21build system: fix generate_BUFSIZ.sh to not alternate 1k and malloc buildsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21libbb: constify *bb_common_bufsiz1 (if it is compiled to be a pointer)Denys Vlasenko
This lets gcc optimize much better: text data bss dec hex filename 922846 910 13056 936812 e4b6c busybox_unstripped.nonconst 920255 910 13056 934221 e414d busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21libbb: make "COMMON_BUFSIZE = 1024 bytes, the buffer will be malloced" workDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21udhcp: add setup_common_bufsiz() as neededDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21*: hopefully all setup_common_bufsiz() are in placeDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21*: add most of the required setup_common_bufsiz() callsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21libbb: make bb_common_bufsiz1 1 kbyte, add capability to use bss tail for itDenys Vlasenko
The config item is FEATURE_USE_BSS_TAIL. When it is off (default): function old new delta read_config 210 228 +18 doCommands 2279 2294 +15 ipneigh_list_or_flush 763 772 +9 ipaddr_list_or_flush 1256 1261 +5 display_process_list 1301 1306 +5 conspy_main 1378 1383 +5 do_lzo_compress 352 355 +3 do_lzo_decompress 565 567 +2 push 46 44 -2 inetd_main 2136 2134 -2 uevent_main 421 418 -3 addLines 97 92 -5 bb_common_bufsiz1 8193 1024 -7169 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181) Total: -7119 bytes text data bss dec hex filename 829850 4086 9080 843016 cdd08 busybox_old 829901 4086 1904 835891 cc133 busybox_unstripped FEATURE_USE_BSS_TAIL=y: read_config 210 228 +18 doCommands 2279 2294 +15 ipneigh_list_or_flush 763 772 +9 ipaddr_list_or_flush 1256 1261 +5 display_process_list 1301 1306 +5 conspy_main 1378 1383 +5 do_lzo_compress 352 355 +3 do_lzo_decompress 565 567 +2 inetd_main 2136 2134 -2 bb_common_bufsiz1 8193 - -8193 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195) Total: -8133 bytes text data bss dec hex filename 829850 4086 9080 843016 cdd08 busybox_old 829911 4086 880 834877 cbd3d busybox_unstripped FIXME: setup_common_bufsiz() calls are missing. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-18unzip: shorter code for date/time generationDenys Vlasenko
function old new delta unzip_main 2426 2414 -12 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-18unzip: better match for "standard" unzip's output; string shrinkageDenys Vlasenko
function old new delta unzip_main 2490 2426 -64 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-64) Total: -64 bytes text data bss dec hex filename 924008 906 17160 942074 e5ffa busybox_old 923846 906 17160 941912 e5f58 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-18unzip: fix percent overflow; show "stored" files properlyDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-17unzip: fix a case where we find wrong CDE. Closes 8821Denys Vlasenko
function old new delta unzip_main 2472 2490 +18 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-15ash: bash-compatible $'...' shouldn't expand in double quotesRon Yorston
Bash doesn't expand its $'...' construct in double quotes: $ echo "$'a\tb'" $'a\tb' Change BusyBox ash to do the same. This also fixes a problem with here documents where BusyBox ash gave an incorrect result for: $ cat <<EOF > '$' > EOF '$' Reported-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-15Rewrite iteration through applet names to save a few bytesRon Yorston
function old new delta run_applet_and_exit 758 755 -3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3) Total: -3 bytes In standalone shell mode the saving increases to 17 bytes. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-08sed: support "-f -" idiomDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-04unrpm: clean upMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-04undeb: clean upMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-04syslogd: minor tweaks to textMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03kconfig/lxdialog: get ncurses CFLAGS with pkg-configBjørn Forsman
This makes "make menuconfig" also work on systems where ncurses is not installed in a standard location (such as on NixOS). This patch changes ccflags() so that it tries pkg-config first, and only if pkg-config fails does it go back to the fallback/manual checks. This is the same algorithm that ldflags() already uses. Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 11:28:11 +0000