Age | Commit message (Collapse) | Author |
|
This reverts commit 2fb63292f7083fb259a3f8d8ee70ef8acdaed626.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Based on a patch by Veli-Pekka Peltola <veli-pekka.peltola@ray.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
As reported in bug 8506:
$ X=abcdÉfghÍjklmnÓpqrstÚvwcyz
$ echo ${#X}
abcd26
The result should be 26.
This regression was introduced by:
<d68d1fb> 2015-05-18 [Ron Yorston] ash: code shrink around varvalue
The length in characters was being used to discard the contents of
the variable instead of the length in bytes.
URL: https://bugs.busybox.net/8506
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
function old new delta
set_alarm - 27 +27
fgets_and_trim 76 92 +16
wget_main 2610 2616 +6
open_socket 64 54 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
nmeter_main 707 745 +38
init_functions 48 44 -4
init_delay 63 - -63
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/1 up/down: 38/-67) Total: -29 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
nmeter_main 709 707 -2
init_cr 15 12 -3
collect_time 141 131 -10
collect_cpu 610 593 -17
init_cpu 82 63 -19
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/5 up/down: 0/-51) Total: -51 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
rdval 34 157 +123
collect_int 123 122 -1
collect_thread_nr 65 62 -3
collect_blk 559 552 -7
collect_if 207 199 -8
collect_fork 119 111 -8
collect_ctx 119 111 -8
collect_fd 81 71 -10
collect_swp 120 107 -13
collect_cpu 623 610 -13
collect_mem 371 339 -32
rdval_loadavg 38 - -38
vrdval 170 - -170
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 1/10 up/down: 123/-311) Total: -188 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
put 52 43 -9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
collect_mem 361 371 +10
collect_swp 116 120 +4
vrdval 168 170 +2
collect_thread_nr 63 65 +2
collect_int 121 123 +2
collect_if 205 207 +2
collect_fork 117 119 +2
collect_fd 79 81 +2
collect_ctx 117 119 +2
collect_cpu 621 623 +2
collect_blk 557 559 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 11/0 up/down: 32/0) Total: 32 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
In coreutils/ls.c, 1.19 introduced commit
2f7d9e8903029b1b5e51a15f9cb0dcb6ca17c3ac, removing the variable tabstops and
hard coding the column separation to 2 characters, but was not done correctly.
The column_width assumes a gap of 1 character, so the computed number of
columns exceeds the terminal width when many small files are encountered.
A minor problem but surprisingly annoying.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Otherwise, "-t 0" usage may end up sending them forever
if server does not respond.
function old new delta
udhcpc_main 2846 2836 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
ntpd_main 1053 1130 +77
add_peers 166 195 +29
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
same IP)
function old new delta
add_peers 98 166 +68
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
RFC2131 paragraph 4.1 states DHCP messages broadcast by a client prior to
that client obtaining its IP address must have the source IP address
field in the header set to 0.
Request messages transmitted in renewing and rebinding state need to use
the obtained IP address as source IP address in the header; this behavior
lines up with other implementations like ISC dhcp client.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Let udhcpd retain the information about expired leases when restarting
so that the leases are reserved until they possibly become the oldest
expired lease.
This reduces the frequency of IP address changes for example when the
DHCP server and a group of clients, who do not store and request their
previously offered IP address across restarts, are collectively restarted
and the startup order of the clients are not guaranteed.
Signed-off-by: Christian Lindeberg <christian.lindeberg@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This patch allow to have multiple interface definitions, much like
Debian's ifupdown. More specifically, it removes the check for a
duplicate definition, so the impact on binary size should be fairly
minimal.
This configuration:
iface eth0 inet static
address 192.168.0.15
netmask 255.255.0.0
gateway 192.168.0.1
iface eth0 inet static
address 10.0.0.1
netmask 255.255.255.0
Will add two addresses to eth0 if ip is used. If ifconfig is used,
the standards methods will likely not stack, but the administrator may
still use the manual method. The DHCP method may work depending on the
DHCP client in use.
This is a fairly advanced feature for power users who knows what they
are doing. There are not many other network configuration systems that
allows multiple addresses on an interface.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
dname_dec 337 332 -5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The non-fancy version of the from_cpuset uses CPU_SETSIZE as if it
represents the number of bytes in the cpuset, while it is actually
the number of bits. This leads to out-of-bounds accesses on the
cpu_set_t in the big-endian case. Basically all uses of CPU_SETSIZE
have to be divided by 8. This is done correctly in the fancy version
of from_cpuset.
In addition, the big-endian case is completely wrong to begin with.
All standard C libraries that I know of implement cpu_set_t as an
unsigned long array, so both for big and little endian, the least
significant bits are in the beginning of the array. Therefore, the
approach taken for the little endian case is equally valid. We only
need special handling for big endian when CPU_SETSIZE is large and
we use an unsigned long long to get more bits out.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
update_local_clock 820 826 +6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This matches behavior with kmod which has been the standard for a long
time at this point.
URL: https://bugs.busybox.net/8021
Reported-by: Jö <jorrit@jorrit.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Building & running with ASAN is super helpful, so add a dedicated config
knob for it. This way people don't have to guess at the right compiler
settings in order to get a good build. We can just tell people to enable
this one option.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Patch based on Balaji Punnuru <balaji.punnuru@gmail.com> work.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When launched as PID 1 and after parsing its arguments, init wipes all
all of them except argv[0] and rewrites argv[0] to contain only "init",
so that its command-line appears solely as "init" in tools such as ps.
This patch adds the FEATURE_INIT_MODIFY_CMDLINE which, if set to n, will
make init preserve all its arguments including argv[0], be they parsed or
ignored.
The original command-line used to launch init can then be retrieved in
/proc/1/cmdline on Linux, for example.
Signed-off-by: Nicolas Carrier <nicolas.carrier@parrot.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
update_local_clock 769 820 +51
recv_and_process_peer_pkt 838 862 +24
reset_peer_stats 137 133 -4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 75/-4) Total: 71 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
After commit 8e74adab0107658e3dc04ed342206272a284f43e
("libbb: make INET[6]_rresolve use sockaddr2{host,dotted}_noport")
INET_sprint6 uses more than just sin6_addr, it also tries to display the
scope id, which is uninitialized when called from ife_print6.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
It allows specifying amount of bytes directly (not only amount of
blocks) is also supported by GNU's Coreutils.
function old new delta
parse_comma_flags - 93 +93
static.iflag_words - 12 +12
dd_main 1569 1580 +11
packed_usage 30591 30600 +9
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 2/0 up/down: 125/0) Total: 125 bytes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This patch fixes compiling busybox with FEATURE_UTMP and _WTMP enabled.
musl, while not really support utmp/wtmp, provides stub functions, as well
as variables such as _PATH_UTMP, so that programs using utmp or wtmp can
still compile fine.
My reasoning for this patch is that on Exherbo, I'm currently trying to get
us to be able to use the same busybox config file for both glibc and musl
systems, using utmp/wtmp on systems that support it, and using the stubs
on musl without needing two different configs.
As of latest musl git, it provides all utmp functions needed; 1.1.12 doesn't,
but I sent a patch to Rich to add the utmp{,x}name functions expected to
exist, which was merged into musl upstream.
Signed-off-by: Kylie McClain <somasissounds@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
printf wasn't correctly handling \c in an argument to the %b format
specifier.
printf %bXX OK\\c
returned 'OK\cXX' rather than the expected 'OK'.
function old new delta
printf_main 886 899 +13
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
add_cmd 1167 1210 +43
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
dos2unix_main 426 441 +15
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
setsid_main 53 96 +43
packed_usage 30846 30833 -13
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|