aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-31diff: fix -B with single line changesAaro Koskinen
Fix -B with single line changes. They were always ignored regardless if they were blank or not. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31less: improve regular file detection in line counting codeDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31less: allow use of last column of terminalRon Yorston
When read_lines tests whether a character will fit on the current line it checks the *next* character but in case of overflow doesn't display the *current* one. This results in the last column of the terminal never being used. The test in re_wrap (used when the terminal width changes or line numbers are enabled/disabled) is different: it does allow the use of the final column. function old new delta read_lines 764 770 +6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/0 up/down: 6/0) Total: 6 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31less: fix line number confusionRon Yorston
Much of the code refers to lines using indices into the flines array (which splits lines into portions that fit on the terminal). In some cases this is wrong and actual line numbers should be used: - when lines are being truncated rather than wrapped (-S flag) - when line numbers have been entered by the user Also fix a bug in numeric input and improve the display at EOF. function old new delta goto_lineno - 111 +111 cap_cur_fline - 101 +101 buffer_to_line - 56 +56 buffer_up 35 66 +31 less_main 2606 2615 +9 goto_match 125 127 +2 buffer_down 81 56 -25 buffer_line 64 - -64 ------------------------------------------------------------------------------ (add/remove: 3/1 grow/shrink: 3/1 up/down: 310/-89) Total: 221 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31less: add a function to detect when display is at end of fileRon Yorston
Add a function to package the test that detects whether enough has been read from the file to allow a screenful to be displayed. Also use this to determine when to display '(END)' in the status line. The previous code was incomplete and didn't handle truncated lines (-S flag) properly. function old new delta at_end - 63 +63 status_print 111 109 -2 read_lines 819 764 -55 getch_nowait 319 264 -55 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/3 up/down: 63/-112) Total: -49 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31less: rearrange detection of non-regular filesRon Yorston
Move the code to detect non-regular files to the point where the file is being opened. If num_lines == READING_FILE guarantees that the file is regular. Detect when a file becomes unreadable between it first being opened and the call to update_num_lines. Mark the file as being non-regular so we don't try that again. function old new delta reinitialize 197 245 +48 update_num_lines 159 127 -32 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/1 up/down: 48/-32) Total: 16 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31less: move code to count lines into a separate functionRon Yorston
function old new delta update_num_lines - 159 +159 m_status_print 409 266 -143 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/1 up/down: 159/-143) Total: 16 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31less: fix numeric inputRon Yorston
Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-31echo: make escape sequences depend on fancy modeMike Frysinger
Currently when you disable fancy echo, escape sequences are hardcoded enabled (e.g. as if you used `echo -e` all the time). The opposite behavior is more desirable (always disable -e support) because: * This seems to contradict the spirit of the kconfig help text (where it says enable support for -n/-e flags), although you could say that we aren't supporting the -e flag directly as `echo -e` will show the -e flag. * POSIX makes escape sequences optional, and even says they are there only on XSI-conformant systems. * It saves space (~100 bytes on x86_64). * It makes things faster! * It makes it behave more like bash where you need an explicit -e flag in order for escape sequences to be interpreted. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-30fbset: fix rgba parsingLinus Walleij
In commit b5c7220e7b2b6611fe5beca494c67bfe51fcfafb "fbset: respect rgba configuration lines in fb.modes" I somehow managed to swap the offset/length markers around. The man page for fb.modes says it should be offset/length not length/offset as I was accidentally parsing it. As my fb.modes file was also reversed I didn't notice until I tried someone elses fb.modes file. Mea culpa. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-30udhcpc: dns labels can actually start with a numberArthur Gautier
While RFC1035 recommends a label not to start with a number, there is actually no such limitation in dns. One may buy a domain name like 0x1.net and use it. This commit remove this check and allow a user to use such domains. Signed-off-by: Arthur Gautier <baloo@gandi.net> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-21less: improvements to verbose status messagesRon Yorston
Make verbose status messages (-m/-M flags) behave more like the real `less` command: - fix display of line numbers so they're correct whether lines are being truncated (-S flag) or wrapped. - don't display total lines or percentage when lines are read from stdin: we don't have that information until we reach EOF. When we do reach EOF the additional information is displayed. - when lines are read from a file count the total number of lines so that we can display percentages. Counting lines is avoided until the information is actually needed. If the user pages to EOF the separate read pass can be avoided entirely. Fixes Bug 7586 function old new delta m_status_print 195 382 +187 safe_lineno - 35 +35 reinitialize 172 182 +10 read_lines 675 685 +10 buffer_fill_and_print 178 169 -9 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 3/1 up/down: 242/-9) Total: 233 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-21sync: add support for -d -f FILEDenys Vlasenko
Based on the patch by Ari Sundholm <ari@tuxera.com> function old new delta sync_main 20 163 +143 packed_usage 30653 30673 +20 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 163/0) Total: 163 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-19Remove old_e2fsprogs/*Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-19libbb: add a function to make a copy of a region of memoryRon Yorston
Introduce a library routine to package the idiom: p = xmalloc(b, n); memcpy(p, b, n); and use it where possible. The example in traceroute used xzalloc but it didn't need to. function old new delta xmemdup - 32 +32 last_main 834 826 -8 make_device 2321 2311 -10 common_traceroute_main 3698 3685 -13 readtoken1 3182 3168 -14 procps_scan 1222 1206 -16 forkchild 655 638 -17 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/6 up/down: 32/-78) Total: -46 bytes Signed-off-by: Ron Yorston <rmy@frippery.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-19less: correctly account for tabs when rewrapping linesRon Yorston
Lines are rewrapped when the terminal width changes or line numbers are enabled/disabled. The current calculation always adds eight to the line length for a tab whereas it should only add enough to move to the next tab stop. This doesn't affect the display of lines, which is handled elsewhere and gets tab stops right, but it does cause lines to be wrapped at the wrong position. Signed-off-by: Ron Yorston <rmy@frippery.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-19less: fix display of line numbersRon Yorston
Line numbers are displayed incorrectly on lines that have a search pattern highlighted. The problem can be fixed by moving the call to lineno_str in print_found above the while loop that alters the value of the line pointer. However, a more substantial rewrite results in savings. function old new delta buffer_print 688 697 +9 .rodata 156077 156045 -32 lineno_str 85 - -85 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 1/1 up/down: 9/-117) Total: -108 bytes Signed-off-by: Ron Yorston <rmy@frippery.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-19less: document -S flag and make it independently configurableRon Yorston
The -S flag, to cause long lines to be truncated, was enabled by FEATURE_LESS_DASHCMD. This is non-obvious and -S is useful even if the '-' command isn't enabled. function old new delta .rodata 156045 156077 +32 packed_usage 30223 30244 +21 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 53/0) Total: 53 bytes Signed-off-by: Ron Yorston <rmy@frippery.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-13ash: use alloca to get rid of setjmpRon Yorston
Now that the only thing protected by setjmp/longjmp is the saved string, we can allocate it on the stack to get rid of the jump. Based on commit bd35d8e from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu. function old new delta readtoken1 3182 3116 -66 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-66) Total: -66 bytes Signed-off-by: Ron Yorston <rmy@frippery.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-13fix file modeDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-13ash: remove parsebackquote flagRon Yorston
Commit 503a0b8 from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu says: >The parsebackquote flag is only used in a test where it always has the >value zero. So we can remove it altogether. The first statement is incorrect: parsebackquote is non-zero when backquotes (as opposed to $(...)) are used for command substitution. It is possible for the test to be executed with parsebackquote != 0 in that case. The test is question checks whether quotes have been closed, raising the error "unterminated quoted string" if they haven't. There seems to be no good reason to allow unclosed quotes within backquotes. Bash, hush and dash (after commit 503a0b8) all treat the following as an error: XX=`"pwd` whereas BusyBox ash doesn't. It just ignores the unclosed quote and executes pwd. So, parsebackquote should be removed but not for the reason stated. function old new delta parsebackquote 1 - -1 readtoken1 3222 3182 -40 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-41) Total: -41 bytes Signed-off-by: Ron Yorston <rmy@frippery.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-13Removes stray empty line from codeManinder Singh
This patch removes stray empty line from busybox code reported by script find_stray_empty_lines Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Akhilesh Kumar <akhilesh.k@samsung.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-01applets: Add installation of individual binariesClayton Shotwell
Adding support to install individual binaries if the option is enabled. This also installs the shared libbusybox.so.* library. Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-01ps: fix SEGV on narrow screens. closes 8176Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-01ipaddress: better formatting, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-01ip addr: support change and replace commandsMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-06-07fix whitespacesManinder Singh
reported by script :- scripts/fix_ws.sh Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-06-07fix if(p)/free(p) constructManinder Singh
No need of explicit NULL check before free. Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Akhilesh Kumar <akhilesh.k@samsung.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-06-07i2cdetect: use break instead of goto in list_i2c_busses_and_exit()Bartosz Golaszewski
Since there are now more statements in the if block after the while loop in list_i2c_busses_and_exit(), there's no need for a label. Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-06-07i2cdump: code reworkBartosz Golaszewski
Split i2cdump_main() into shorter functions. Simplify the code a bit. Make block an array of ints so that we can store negative results of read functions (fixes a bug found by Denys Vlasenko). Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-06-07i2cdetect: add a check for (mode == DETECT_MODE_AUTO)Bartosz Golaszewski
We should only warn the user about addresses to be skipped if (mode == DETECT_MODE_AUTO). Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-06-07i2cdetect: don't scan non-regular addresses without the '-a' optionBartosz Golaszewski
Addresses 0x00-0x02 shouldn't be scanned by default. This patch makes 'first' default to 0x03 and only enables lower addresses if '-a' option is passed Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-06-07i2cdetect: don't die on addresses already in use by driversBartosz Golaszewski
We can't use i2c_set_slave_addr() in i2cdetect, as we have to check for EBUSY after calling ioctl(I2C_SLAVE) and print 'UU' on busy addresses instead of bailing-out. While we're at it: reorder definitions of local vars in i2cdetect_main(). function old new delta i2cdetect_main 703 744 +41 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/0 up/down: 41/0) Total: 41 bytes text data bss dec hex filename 826097 4164 9584 839845 cd0a5 busybox_old 826145 4164 9584 839893 cd0d5 busybox_unstripped Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-06-07chown: fix help textJunling Zheng
Signed-off-by: Junling Zheng <zhengjunling@huawei.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-25truncate: do not die when a file doesn't exist and no-create flag is onAri Sundholm
Additionally, open(2) failures do not make the program die immediately. This makes the behavior of the program match coreutils more closely. function old new delta truncate_main 161 221 +60 Signed-off-by: Ari Sundholm <ari@tuxera.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-25Print one less newline at the end of bb_show_usage()Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-25typo fixesManinder Singh
Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-25dc: fix "dc p" prinitng bogus dataDenys Vlasenko
function old new delta check_under - 20 +20 print_no_pop 27 32 +5 pop 33 24 -9 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/1 up/down: 25/-9) Total: 16 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-24tc: fix print_rateDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18hush: add recent ash tests to hush testsuite too (they all pass for hush)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18testsuite: add some tests for ashRon Yorston
Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18ash: fix breakage of ${v/pat/str}Ron Yorston
The commit ash: move parse-time quote flag detection to run-time breaks pattern substitution in parameter expansion. Fix this and revise the code so that the different handling of the pattern and the replacement string takes place in rmescapes rather than the separate function parse_sub_pattern. function old new delta rmescapes 227 273 +46 static.qchars 3 4 +1 subevalvar 1177 1157 -20 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 47/-20) Total: 27 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18ash: move parse-time quote flag detection to run-timeRon Yorston
Because the parser does not recursively parse parameter expansion with respect to quotes, we can't accurately determine quote status at parse time. This patch works around this by moving the quote detection to run-time where we do interpret it recursively. Test case: foo=\\ echo "<${foo#[\\]}>" Old result: <\> New result: <> Do not quote back slashes in parameter expansions outside quotes. Test case: a=/b/c/* b=\\ echo ${a%$b*} Old result: /b/c/* New result: /b/c/ Based on commits 880d952, 7cfd8be, 0d7d660 and a7c21a6 from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu function old new delta argstr 1164 1193 +29 memtodest 147 174 +27 subevalvar 1153 1177 +24 redirect 1279 1282 +3 dolatstr 5 7 +2 static.spclchars 10 9 -1 expandarg 962 960 -2 evalcase 273 271 -2 evalcommand 1204 1197 -7 rmescapes 236 227 -9 preglob 27 8 -19 evalvar 604 582 -22 cmdputs 389 334 -55 readtoken1 3163 3061 -102 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 5/9 up/down: 85/-219) Total: -134 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18ash: remove arithmetic expansion collapsing at parse timeRon Yorston
Collapsing arithmetic expansion is incorrect when the inner arithmetic expansion is a part of a parameter expansion. Test case: unset a echo $((3 + ${a:=$((4 + 5))})) echo $a Old result: 12 (4 + 5) New result: 12 9 Based on commit bb777a6 from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu function old new delta readtoken1 3180 3163 -17 Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18ash: remove superfluous code in arithmetic modeRon Yorston
Based on commits 1a74845, cfc3d6a and ff13779 from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu function old new delta evalcommand 1197 1204 +7 localcmd 327 325 -2 readtoken1 3200 3180 -20 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 1/2 up/down: 7/-22) Total: -15 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18ash: do not expand tilde in parameter expansion within quotesRon Yorston
Test case: unset a echo "${a:-~root}" Old result: /root New result: ~root Based on commit 170f44d from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu function old new delta evalvar 598 604 +6 parse_command 1440 1443 +3 localcmd 325 327 +2 readtoken1 3199 3200 +1 argstr 1180 1164 -16 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 4/1 up/down: 12/-16) Total: -4 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18ash: perform tilde expansion in all parameter expansion wordsRon Yorston
Previously tilde expansion was not carried out for =?#% expansion words. Test case: a=~root:~root echo ${a#~root} Old result: /root:/root New result: :/root Based on commit dd721f71 from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu function old new delta subevalvar 1152 1153 +1 Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-18ash: code shrink around varvalueRon Yorston
Based on commit c989d72 from git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu function old new delta strtodest - 40 +40 memtodest 123 147 +24 parse_command 1443 1440 -3 readtoken1 3205 3199 -6 argstr 1203 1180 -23 varvalue 788 660 -128 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/4 up/down: 64/-160) Total: -96 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-13ash: explain what "local -" doesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-05-13ash: consider "local -" case while iterating over local variables in mklocal.Eugene Rudoy
fixes segfault introduced in 0a0acb55db8d7c4dec445573f1b0528d126b9e1f with functions using "local -". test-case: f() { local -; local x; }; f note: with this change applied multiple 'local -'s still cause multiple entries to be added to the localvars list. this problem will be addressed in a separate commit. Signed-off-by: Eugene Rudoy <gene.devel@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>