aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-24flock: fix -c; improve error handling of fork+execDenys Vlasenko
function old new delta flock_main 254 334 +80 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-24ip: fix problem on mips64 n64 big endian musl systemsSzabolcs Nagy
Use designated initializers for struct msghdr. The struct layout is non-portable and musl libc does not match what busybox expects. Signed-off-by: Szabolcs Nagy <nsz@port70.net> Tested-by: Waldemar Brodkorb <wbx@openadk.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-24sed: understand \n,\r and \t in i and a commands. Closes 8871Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-24generate_BUFSIZ.sh: yet another tweakDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22*: slap on a few ALIGN1/2s where appropriateDenys Vlasenko
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map" text data bss dec hex filename 829901 4086 1904 835891 cc133 busybox_before 829665 4086 1904 835655 cc047 busybox Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22scripts/trylink: document DATA_SEGMENT_ALIGN() hackDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22generate_BUFSIZ.sh: catch BUFSIZE < 1024 also on "big" buildsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21build system: fix generate_BUFSIZ.sh to not alternate 1k and malloc buildsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21libbb: constify *bb_common_bufsiz1 (if it is compiled to be a pointer)Denys Vlasenko
This lets gcc optimize much better: text data bss dec hex filename 922846 910 13056 936812 e4b6c busybox_unstripped.nonconst 920255 910 13056 934221 e414d busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21libbb: make "COMMON_BUFSIZE = 1024 bytes, the buffer will be malloced" workDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21udhcp: add setup_common_bufsiz() as neededDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21*: hopefully all setup_common_bufsiz() are in placeDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21*: add most of the required setup_common_bufsiz() callsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21libbb: make bb_common_bufsiz1 1 kbyte, add capability to use bss tail for itDenys Vlasenko
The config item is FEATURE_USE_BSS_TAIL. When it is off (default): function old new delta read_config 210 228 +18 doCommands 2279 2294 +15 ipneigh_list_or_flush 763 772 +9 ipaddr_list_or_flush 1256 1261 +5 display_process_list 1301 1306 +5 conspy_main 1378 1383 +5 do_lzo_compress 352 355 +3 do_lzo_decompress 565 567 +2 push 46 44 -2 inetd_main 2136 2134 -2 uevent_main 421 418 -3 addLines 97 92 -5 bb_common_bufsiz1 8193 1024 -7169 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181) Total: -7119 bytes text data bss dec hex filename 829850 4086 9080 843016 cdd08 busybox_old 829901 4086 1904 835891 cc133 busybox_unstripped FEATURE_USE_BSS_TAIL=y: read_config 210 228 +18 doCommands 2279 2294 +15 ipneigh_list_or_flush 763 772 +9 ipaddr_list_or_flush 1256 1261 +5 display_process_list 1301 1306 +5 conspy_main 1378 1383 +5 do_lzo_compress 352 355 +3 do_lzo_decompress 565 567 +2 inetd_main 2136 2134 -2 bb_common_bufsiz1 8193 - -8193 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195) Total: -8133 bytes text data bss dec hex filename 829850 4086 9080 843016 cdd08 busybox_old 829911 4086 880 834877 cbd3d busybox_unstripped FIXME: setup_common_bufsiz() calls are missing. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-18unzip: shorter code for date/time generationDenys Vlasenko
function old new delta unzip_main 2426 2414 -12 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-18unzip: better match for "standard" unzip's output; string shrinkageDenys Vlasenko
function old new delta unzip_main 2490 2426 -64 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-64) Total: -64 bytes text data bss dec hex filename 924008 906 17160 942074 e5ffa busybox_old 923846 906 17160 941912 e5f58 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-18unzip: fix percent overflow; show "stored" files properlyDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-17unzip: fix a case where we find wrong CDE. Closes 8821Denys Vlasenko
function old new delta unzip_main 2472 2490 +18 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-15ash: bash-compatible $'...' shouldn't expand in double quotesRon Yorston
Bash doesn't expand its $'...' construct in double quotes: $ echo "$'a\tb'" $'a\tb' Change BusyBox ash to do the same. This also fixes a problem with here documents where BusyBox ash gave an incorrect result for: $ cat <<EOF > '$' > EOF '$' Reported-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-15Rewrite iteration through applet names to save a few bytesRon Yorston
function old new delta run_applet_and_exit 758 755 -3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3) Total: -3 bytes In standalone shell mode the saving increases to 17 bytes. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-08sed: support "-f -" idiomDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-04unrpm: clean upMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-04undeb: clean upMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-04syslogd: minor tweaks to textMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03kconfig/lxdialog: get ncurses CFLAGS with pkg-configBjørn Forsman
This makes "make menuconfig" also work on systems where ncurses is not installed in a standard location (such as on NixOS). This patch changes ccflags() so that it tries pkg-config first, and only if pkg-config fails does it go back to the fallback/manual checks. This is the same algorithm that ldflags() already uses. Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03kbuild: Make scripts executableMichal Marek
The Makefiles call the respective interpreter explicitly, but this makes it easier to use the scripts manually. Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.hYann E. MORIN
The current code does this: if [ -f /usr/include/ncursesw/curses.h ]; then echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncursesw/curses.h>"' elif [ -f /usr/include/ncurses/ncurses.h ]; then echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"' elif [ -f /usr/include/ncurses/curses.h ]; then echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"' [...] This is merely inconsistent: - adding the full path to the directory in the -I directive, - especially since that path is already a sub-path of the system include path, - and then repeating the sub-path in the #include directive. Rationalise each include directive: - only use the filename in the #include directive, - keep the -I directives: they are always searched for before the system include path; this ensures the correct header is used. Using the -I directives and the filename-only in #include is more in line with how pkg-config behaves, eg.: $ pkg-config --cflags ncursesw -I/usr/include/ncursesw This paves the way for using pkg-config for CFLAGS, too, now we use it to find the libraries. Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03menuconfig: optionally use pkg-config to detect ncurses libsJustin Lecher
When building ncurses with --with-termlib several symbols get moved from libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one additionally needs to link with libtinfo.so. The ncurses pkg-config module will be used to detect the necessary libs for linking. If not available the old heuristic for detection of the ncurses libs will be used. Signed-off-by: Justin Lecher <jlec@gentoo.org> Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03menuconfig: fix extended colors ncurses supportKrzysztof Mazur
The ncurses library allows for extended colors. The support for extended colors support depends on wide-character support. ncurses headers enable extended colors (NCURSES_EXT_COLORS) only when wide-character support is enabled (NCURSES_WIDECHAR). The "make menuconfig" uses wide-character ncursesw library, which can be compiled with wide-character support, but does not define NCURSES_WIDECHAR and it's using headers without wide-character (and extended colors) support. This fixes problems with colors on systems with enabled extended colors (like PLD Linux). Without this patch "make menuconfig" is hard to use. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03kbuild: Fix gcc -x syntaxJean Delvare
The correct syntax for gcc -x is "gcc -x assembler", not "gcc -xassembler". Even though the latter happens to work, the former is what is documented in the manual page and thus what gcc wrappers such as icecream do expect. This isn't a cosmetic change. The missing space prevents icecream from recognizing compilation tasks it can't handle, leading to silent kernel miscompilations. Besides me, credits go to Michael Matz and Dirk Mueller for investigating the miscompilation issue and tracking it down to this incorrect -x parameter syntax. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Cc: Bernhard Walle <bernhard@bwalle.de> Cc: Michal Marek <mmarek@suse.cz> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03kconfig: fix check-lxdialog for DLL platformsYaakov Selkowitz
Import libraries on Cygwin and MinGW/MSYS use the .dll.a suffix, so checking this suffix is necessary to make sure ncurses will still be found when built without static libraries. Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03kconfig: check ncursesw headers first in check-lxdialogYaakov Selkowitz
Commit 8c41e5e363db55d91aa3b1cdce4ab02ad9821de7 added a check for ncursesw/curses.h for the case where ncurses and ncursesw are build separately but only one is installed. But if both are installed, the headers ncurses/curses.h and ncursesw/curses.h differ, and since libncursesw will be found first, so should ncursesw/curses.h. Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03kconfig: fix menuconfig on debian lennyJunio C Hamano
In 60f33b8 (kconfig: get rid of stray a.o, support ncursesw, 2006-01-15), support to link menuconfig with ncursesw library was added. To compute the linker command option -l, we check "libncursesw.{so,a,dylib}" to allow ncursesw to be used as a replacement ncurses. However, when checking what header file to include, we do not check /usr/include/ncursesw directory. Add /usr/include/ncursesw to the list of directories that are checked. With this patch, on my Debian Lenny box with libncursesw5-dev package but not libncurses5-dev package, I can say "make menuconfig". Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03Revert "lxdialog: fix ncursesw include detection"Mike Frysinger
This reverts commit e91bc53d0c2e8de7dc4fbdb888ab0a4923c2b475. Let's get back to a state that matches upstream so we can pull in all of their fixes from the last few years. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-04-03find_applet_by_name: loop index should be signedRon Yorston
The loop for (j = ARRAY_SIZE(applet_nameofs)-1; j >= 0; j--) { was intended to terminate when j goes negative, so j needs to be signed. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03whitespace and namespace cleanupsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03ubirmvol: Implement -N switch for ubirmvolSven Eisenberg
function old new delta get_volid_by_name - 125 +125 ubi_devnum_from_devname - 43 +43 ubi_tools_main 1215 1220 +5 packed_usage 30674 30655 -19 ubirename_main 394 221 -173 ------------------------------------------------------------------------------ (add/remove: 3/0 grow/shrink: 1/2 up/down: 173/-192) Total: -19 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03ubirename: new appletSven Eisenberg
function old new delta ubirename_main - 394 +394 packed_usage 30611 30674 +63 applet_names 2530 2540 +10 Signed-off-by: Sven Eisenberg <sven.eisenberg@novero.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03libbb: speed up error_msg functionsDenys Vlasenko
function old new delta bb_verror_msg 386 466 +80 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03main(): add a TODO about finding a use for _end[] areaDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-03trylink: on failure, print a hint about CONFIG_EXTRA_LDLIBSDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-02typo fixDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-02find_applet_by_name: add an example of faster linear search codeDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-02nsenter,unshare: work around older headerDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-02sort: "-o FILE", not "-o", is the syntaxDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-02nsenter,unshare: share common code; fix a bug of not closing all fdsDenys Vlasenko
function old new delta xvfork_parent_waits_and_exits - 64 +64 exec_prog_or_SHELL - 39 +39 unshare_main 873 810 -63 nsenter_main 663 596 -67 ------------------------------------------------------------------------------ (add/remove: 2/0 grow/shrink: 0/2 up/down: 106/-130) Total: -27 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-02sort: help text does not need to say that -mST are supported but ignoredDenys Vlasenko
Such information is useless for users of "sort --help" Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-02build system: finer-grained selection of search speedup table.Denys Vlasenko
KNOWN_APPNAME_OFFSETS=8 versus KNOWN_APPNAME_OFFSETS=0: function old new delta find_applet_by_name 55 136 +81 applet_nameofs - 14 +14 run_applet_and_exit 757 758 +1 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-02unshare: remove stale commentDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-01nsenter: new appletBartosz Golaszewski
function old new delta nsenter_main - 663 +663 .rodata 155147 155612 +465 packed_usage 30536 30708 +172 nsenter_longopts - 116 +116 open_by_path_or_target - 58 +58 applet_names 2518 2526 +8 applet_main 2920 2928 +8 ------------------------------------------------------------------------------ (add/remove: 4/0 grow/shrink: 4/0 up/down: 1490/0) Total: 1490 bytes text data bss dec hex filename 827956 4078 9080 841114 cd59a busybox_old 829214 4086 9080 842380 cda8c busybox_unstripped Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>