aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-18sendmail: avoid sending mail to wrong addressesAaro Koskinen
If we get an address we cannot parse properly, we currently just strip the unknown characters and still try to send it. This is considered harmful as the resulting address may still be valid but different from what the user originally intended. Instead, skip sending to an address we cannot fully understand and print the characters what we have scanned so far. Leading and trailing whitespace is allowed and silently stripped. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-18mkfs_minix: use get_volume_size_in_bytes instead of local versionDenys Vlasenko
Hopefully this also closes 4730 function old new delta valid_offset 55 - -55 mkfs_minix_main 2925 2674 -251 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-306) Total: -306 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-17mdev: fix build failureDenys Vlasenko
The error was "error: 'struct globals' has no member named 'parser'" Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-17nc: fix build failure ("subscripted value is neither array nor pointer")Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-17ash: add comment about failures in source builtin. No code changes.Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-17hush: source builtin should override $N only if it has argsDenys Vlasenko
function old new delta builtin_source 174 184 +10 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15ash: read $HOME/.profile instead of $(pwd)/.profileStefan Hellermann
ash --login should read ~/.profile instead of .profile in the current directory. I noticed it while trying to figure out why /root/.profile is only read sometimes. function old new delta ash_main 1374 1398 +24 Signed-off-by: Stefan Hellermann <stefan@the2masters.de> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15ash: move code to allow setting $HOME in /etc/profileStefan Hellermann
move HISTFILE=$HOME/.ash_history below reading /etc/profile, so that /etc/profile can set $HOME. HOME can be unset when directly invoking ash --login from init without going through getty. Signed-off-by: Stefan Hellermann <stefan@the2masters.de> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15vi: code shrinkDenys Vlasenko
function old new delta status_line_bold_errno - 32 +32 colon 2891 2873 -18 file_insert 354 313 -41 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/2 up/down: 32/-59) Total: -27 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15vi: fix adjustment of buffer on partial file readRon Yorston
The second argument to text_hole_delete was incorrect: it should be a pointer to the end of the hole. Signed-off-by: Ron Yorston <rmy@tigress.co.uk> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15sysklogd: trim help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15traceroute: free some memory allocated by xzalloc()Guilherme Maciel Ferreira
Signed-off-by: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15flash_eraseall: implement -NAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15nanddump: fix build if nandwrite isn't enabledAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-15ping[6]: accept and ignore -n. Code shrinkDenys Vlasenko
function old new delta print_stats_and_exit 270 232 -38 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-14udhcpd: also add -I ADDR to help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-13udhcpd: add -I LOCAL_ADDR optionDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-13awk: Fix handling of functions with empty bodyBernhard Reutner-Fischer
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2013-03-12losetup: fix util-linux compatibilityMandeep Singh Baines
Added -a support. Also made sure -f works as follows: losetup [-r] [-o offset] {-f|loopdev} file Removed support for 'losetup -r' with no arguments. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-03-12readlink: note that our -f is really -eMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-03-12readlink: uClibc supports automatic allocation too nowMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-03-12platform: use KERNEL_VERSION to simplify uClibc version checkingMike Frysinger
This makes reading the logic (as well as adding new code) a lot simpler, and fixes one or two cases that were broken due to incorrect sub-version tests. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-03-12udhcpc: use readlink rather than realpathMike Frysinger
The realpath utility requires all paths exist when canonicalizing symlinks. If /etc/resolv.conf points to a tmpfs, then it might not exist initially. Use `readlink -f` so that we follow all symlinks that are available. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-03-04hostid: do not output sign-extended host id. Closes 6056Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-03archival: note implicit dependencies between lzop & bbunzipMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-03-01decompress_unlzma: move function, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-01decompress_unlzma: 10% speedup in "small" codeDenys Vlasenko
text data bss dec hex filename 1796 0 0 1796 704 decompress_unlzma.o 1801 0 0 1801 709 decompress_unlzma.o Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-01decompress_unlzma: make "fast" version a bit smallerDenys Vlasenko
It is not slower. In fact it seems a tiny bit faster too. text data bss dec hex filename 2827 0 0 2827 b0b decompress_unlzma.o 2797 0 0 2797 aed decompress_unlzma.o Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-01lzop: fiq -q and OPTION_DECOMPRESS mismatchDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28bbunzip: fix order of flags vs bit definesMike Frysinger
Too much code shuffling. Reported-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-02-28bbunzip: ignore the -q flag with the decompressorsMike Frysinger
The -q flag is used in shell scripts for suppressing output. Have our applets swallow the flag for compatibility. Reported-by: Mandeep Singh Baines <msb@chromium.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-02-28ifupdown: support "source" stanza in /etc/network/interfacesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28zcat: fix "zcat FILE" trying to do detection twiceDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28zcat: if seamless uncompressors are defined, autodetect file's formatDenys Vlasenko
function old new delta bbunpack 526 622 +96 packed_usage 29335 29341 +6 gunzip_main 64 67 +3 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28fix error message on failure to oen /dev/null; fix zcat's help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28code shrink in check_errors_in_children()Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28pgrep: fix a "missing closing paren" build errorDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28ifplugd: make -k send SIGINT, not SIGQUITDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28pgrep: fix -x optionBernhard Walle
Because when -x is used (exact match), then we cannot compile the regular expression with REG_NOSUB. The manual page regcomp(3) states in section "Byte offsets": Unless REG_NOSUB was set for the compilation of the pattern buffer, it is possible to obtain substring match addressing information. The problem was detected on an ARM system with glibc 2.16. Signed-off-by: Bernhard Walle <bernhard@bwalle.de> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28Fix config help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28make --help return exitcode 0. Closes 5612Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28run-parts: fix unicode creep in --helpPeter Korsgaard
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28nc_bloaty: support -ll and -lk. Closes 2245Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28nc: don't redirect stderr to network in -e PROG modeDenys Vlasenko
This in incompatible with nc-1.10, but makes a lot of sense. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28nameif: fix use-after-free in ENABLE_FEATURE_CLEAN_UP codeThomas De Schampheleire
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28run-parts: stop providing incompatible short optionsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-28run-parts: add --exit-on-error | -e supportPeter Korsgaard
The "big" run-parts supports a handy --exit-on-error to stop execution on errors, so lets support it as well. Upstream doesn't have a short option for it, but I've used '-e' for busybox. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-27xz: fix put_unaligned_{l,b}e32Leonid Lisovskiy
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-27lineedit: initialize delptrShawn J. Goff
In vi mode, the 'p' and 'P' commands caused a segfault when nothing had been put in the buffer yet because the delptr was not initialized. Signed-off-by: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-02-27xz: support concatenated .xz streamsLasse Collin
function old new delta xz_dec_reset - 77 +77 unpack_xz_stream 2402 2397 -5 Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>