aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-17iproute: support onelink route option and print route flagsMichael Tokarev
function old new delta print_route 1797 1865 +68 do_iproute 2097 2112 +15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 83/0) Total: 83 bytes Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-11-17exit with 127 if appled name wasn't found - it's more POSIXyDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-11-04zcip: Add environment variable for overriding log functionalityMichel Stam
function old new delta bb_logenv_override - 70 +70 packed_usage 29969 30033 +64 zcip_main 1426 1431 +5 ------------------------------------------------------------------------------ (add/remove: 2/0 grow/shrink: 2/0 up/down: 139/0) Total: 139 bytes Signed-off-by: Michel Stam <m.stam@fugro.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-30zcip: allow our own class B range to be used for ZeroConfMichel Stam
169.254 may already be used by a local network. This patch allows specifying your own IP range. Our particular use case is a mesh network, in which the nodes partaking were using an IP range specifically assigned for the meshing purpose. As the LAN side of the mesh node could use 169.254, this default range was not an option. function old new delta zcip_main 1342 1426 +84 pick_nip - 40 +40 packed_usage 29974 29969 -5 pick 34 - -34 ------------------------------------------------------------------------------ (add/remove: 1/1 grow/shrink: 1/1 up/down: 124/-39) Total: 85 bytes Signed-off-by: Michel Stam <m.stam@fugro.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-30udhcpd: add option for tweaking arppingMichel Stam
Some clients have a very short timeout for sending the DHCP DISCOVER, shorter than the arpping timeout of 2000 milliseconds that udhcpd uses by default. This patch allows tweaking the timeout, or disabling of arpping altogether, at the risk of handing out addresses which are already in use. function old new delta udhcpd_main 1460 1501 +41 udhcpc_main 2814 2851 +37 packed_usage 29957 29974 +17 arpping 477 493 +16 find_free_or_expired_nip 161 174 +13 send_offer 285 292 +7 nobody_responds_to_arp 85 89 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0) Total: 135 bytes Signed-off-by: Michel Stam <m.stam@fugro.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-05ntpd: calculate offset to jitter ratio before updating jitterMiroslav Lichvar
The offset to jitter ratio is now calculated before updating jitter to make the test more sensitive. function old new delta ntp_init 460 474 +14 update_local_clock 752 764 +12 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 26/0) Total: 26 bytes Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-05sed: fix "sed CMD -i nonexistent_file". Closes 7484Denys Vlasenko
function old new delta sed_main 643 676 +33 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-02ntpd: don't stay at short polling intervalMiroslav Lichvar
To avoid polling servers frequently slowly increase the interval up to BIGPOLL when - no replies are received from a peer - no source can be selected - peer claims to be unsynchronized (e.g. we are polling it too frequently) When recv() returns with an error, drop code to try to continue on network errors: I'm not convinced those cases happen in real life. function old new delta recv_and_process_peer_pkt 919 838 -81 Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-02getty: set tty attrs so that control chars are shown as ^cDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-27ntpd: be less eager to use shorter poll intervalsDenys Vlasenko
* on step, poll interval drops to 8.5 mins instead of 32 seconds * on total loss of all replies (no replies from any peer for last 8 requests), also drop poll interval to 8.5 mins instead of 32 seconds * on send abd recv errors, RETRY_INTERVAL is now 32 seconds, not 5 seconds * on timing out listening to reply, instead of unconditional shortening poll interval by x4, clamp it to NOREPLY_INTERVAL (512 seconds) * if a largish offset is seen, clamp nexp poll interval to 128 seconds, not 64 seconds function old new delta clamp_pollexp_and_set_MAXSTRAT - 37 +37 recv_and_process_peer_pkt 861 869 +8 poll_interval 52 48 -4 update_local_clock 762 752 -10 ntpd_main 1063 1050 -13 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/3 up/down: 45/-27) Total: 18 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-25ubiupdatevol: fix -t to not require an option. Closes 7466Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-24install: fix help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-24ntpd: split out poll adjusting codeMiroslav Lichvar
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-24ntpd: don't wait for good offset before disabling burst modeMiroslav Lichvar
The burst mode needs to be stopped even when no replies are received. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-24install: implement -t DIRAaro Koskinen
Some packages want to install themselves using "-t" to specify the directory (as supported by GNU coreutils). Add support for the option for compatibility reasons. function old new delta install_longopts 76 95 +19 install_main 769 777 +8 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 27/0) Total: 27 bytes Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-23less: make -E workAaro Koskinen
function old new delta buffer_print 71 104 +33 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-22less: trivial code shrinkDenys Vlasenko
function old new delta read_lines 715 695 -20 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-22less: move "retry-on-EAGAIN" logic closer to read opsDenys Vlasenko
This makes "G" (goto end of input) command work as well as /search_for_nonexistent_string: both will read to EOF now even from somewhat slow input (such as kernel's "git log"). function old new delta ndelay_on 35 43 +8 ndelay_off 35 43 +8 read_lines 695 691 -4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 16/-4) Total: 12 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-21less: disable "suppress empty wraparound" optimizationDenys Vlasenko
It is buggy wrt another use case... Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-20df: fix -T option when ENABLE_FEATURE_HUMAN_READABLE=0Ari Sundholm
Signed-off-by: Ari Sundholm <ari@tuxera.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-18false: make "false --help" exit with 1Denys Vlasenko
function old new delta run_applet_no_and_exit 447 445 -2 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-17df: implement -T optionAri Sundholm
function old new delta df_main 863 998 +135 packed_usage 29827 29861 +34 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 169/0) Total: 169 bytes Signed-off-by: Ari Sundholm <ari@tuxera.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-16sed: fix a buglet in s///NUM handlingDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-15ftpd: make LIST command show dotfiles tooDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-15vi: fix incorrect memory access on brace matching. Closes 7256Denys Vlasenko
While at it, fix brace matching to actually show the match (missed fflush was causing cursor positioning to be buffered); shorten brace matching code; remove unused macro indirection in indicate_error(). Custom linker script 'busybox_ldscript' found, using it function old new delta indicate_error - 61 +61 mysleep 43 56 +13 char_insert 483 486 +3 find_pair 167 124 -43 Indicate_Error 61 - -61 ------------------------------------------------------------------------------ (add/remove: 1/1 grow/shrink: 2/1 up/down: 77/-104) Total: -27 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-08mdev: treat zero-length /dev/mdev.seq the same as "\n" one. Closes 7334Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-08ash: fix off-by-one in "jobs %4" handling. closes 7310Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-08ash: factor out ASH_HELP config optionDenys Vlasenko
It used to be aliased to !FEATURE_SH_EXTRA_QUIET for ash, while hush had it separate from FEATURE_SH_EXTRA_QUIET. Bring ash in line with hush. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-05find: support -perm /BITS. Closes 7340Denys Vlasenko
function old new delta parse_params 1487 1497 +10 func_perm 57 61 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 14/0) Total: 14 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-04tftpd: tweak HP PA-RISC firmware bug compatibilityDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-03tftpd: support full 512-byte requestsDenys Vlasenko
Some HP PA-RISC firmware always sends fixed 512-byte requests, with trailing garbage. function old new delta tftpd_main 578 572 -6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-31taskset: fix logic error in "if it doesn't start with 0x..."Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-28grep: fix "grep -r PATTRN SYMLINK_TO_DIR"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-27ping: add -p to specify data patternFlorian Fainelli
function old new delta common_ping_main 1788 1831 +43 sendping6 56 82 +26 sendping4 82 108 +26 packed_usage 29959 29938 -21 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/1 up/down: 95/-21) Total: 74 bytes Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-17taskset: support CPU masks for more than 64 CPUsDenys Vlasenko
function old new delta taskset_main 522 631 +109 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-15addgroup: mention -S in the help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-13ash: make ${#var} unicode-awareDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-13ash,hush: run reinit_unicode() only if makes senseDenys Vlasenko
With static Unicode support, no need to check $LANG et al. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-13hush: make ${#var} unicode-awareDenys Vlasenko
This mimics bash Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-11init: if libc-based Unicode support is on, run setlocale(LC_ALL, "") at startupDenys Vlasenko
It is not clear why we were excluding init from this. The "getpid() != 1" clause was there from the beginning (2001) but not explained. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-05ftpd: add optional support for authenticationMorten Kvistgaard
function old new delta cmdio_get_cmd_and_arg - 237 +237 get_passwd - 97 +97 check_password - 82 +82 ftpd_main 2297 2178 -119 ask_and_check_password_extended 206 84 -122 ------------------------------------------------------------------------------ (add/remove: 3/0 grow/shrink: 0/2 up/down: 416/-241) Total: 175 bytes Signed-off-by: Morten Kvistgaard <MK@pch-engineering.dk> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-30sha3: tweak comments and indentationDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-30sha3: code shrink (and speedup for SHA3_SMALL=0)Denys Vlasenko
function old new delta sha3_process_block72 1454 1359 -95 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-29top: fix memset length (sizeof(ptr) vs sizeof(array) problem)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-27top: fix and merge code to parse /proc/meminfoTimo Teräs
display_header() code to parse meminfo as is was buggy: - uninitialized variables were used if meminfo was not as expected - meminfo parsing failed on new kernels (3.14+) as new field 'MemAvailable' was introduced between MemFree and Buffers - shared memory was handled only for ancient kernels (2.4.x and earlier) as result Buffers and shared memory fields were shown with bogus values on current kernels. The new code does not try to parse the old style summary header, as the separated fields are always present (it saves code size). Additionally, both Shmem (2.6+) and MemShared (2.4 and earlier) fields are now parsed and summed for shared memory usage; as only one of them exists depending on kernel version. display_topmem_header() parses also meminfo so this makes it use the same code for code shrink. function old new delta display_header - 681 +681 display_topmem_process_list 465 684 +219 parse_meminfo - 189 +189 static.fields - 106 +106 static.match 132 - -132 .rodata 120254 120117 -137 display_topmem_header 513 - -513 display_process_list 1705 667 -1038 ------------------------------------------------------------------------------ (add/remove: 3/2 grow/shrink: 1/2 up/down: 1195/-1820) Total: -625 bytes Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-25sha3: add 32-bit optimized bit-sliced implementationDenys Vlasenko
It is an interesting trick, but so far I only managed to make it work correctly, not to make it faster and/or smaller. The code is ifdefed out for now. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-20zcip: fix link-local IP conflict detectionKen Sharp
During link-local IP resolution, if a regular ARP request is received during the ARP probe period, it will incorrectly cause a target IP conflict. This then leads to a new IP being picked unnecessarily. Per RFC 3927, section 2.2.1, we should flag a target IP conflict only if the source IP is null, the target IP matches our IP, and the source hw addr does not match our hw addr. function old new delta zcip_main 1354 1322 -32 Signed-off-by: Ken Sharp <ken.sharp@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-16udhcp: add PXELINUX path prefix option (code 210) definitionJeremy Kerr
Like d3092c99, this change adds support for the DHCP "path-prefix" option, as defined in RFC 5071. We use the string identifer "pxepathprefix". Adding this option makes string parsing in the hook scripts simpler. function old new delta dhcp_option_strings 255 269 +14 dhcp_optflags 72 74 +2 Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-15ntpd: add support for -I IFACEDenys Vlasenko
function old new delta packed_usage 29908 29947 +39 ntp_init 428 460 +32 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 71/0) Total: 71 bytes Signed-off-by: Nikolaus Froehlich <nikolaus@mathematik.uni-marburg.de> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-04modinfo: fix module parsing with kernel >= 2.6.37David Marchand
display() function returns the length of the value we are displaying + 1. As a consequence, if we have field=value\0field=value\0field=value in the binary, then the second occurence will be skipped as ptr will miss the first character of the following field. Example trying to list aliases from ixgbe.ko on a 3.2 kernel. - In the module we have: alias=pci:v00008086d00001560sv*sd*bc*sc*i*\0 alias=pci:v00008086d0000154Asv*sd*bc*sc*i*\0 alias=pci:v00008086d00001557sv*sd*bc*sc*i*\0 alias=pci:v00008086d0000154Fsv*sd*bc*sc*i*\0 alias=pci:v00008086d0000154Dsv*sd*bc*sc*i*\0 ... - Using modinfo -F alias ixgbe returns: alias: pci:v00008086d00001560sv*sd*bc*sc*i* alias: pci:v00008086d00001557sv*sd*bc*sc*i* alias: pci:v00008086d0000154Dsv*sd*bc*sc*i* ... This problem appeared with kernel commit "modules: no need to align .modinfo strings" b6472776816af1ed52848c93d26e3edb3b17adab in 2.6.37. Fix this by not trusting display() return value but increment ptr by strlen(ptr) (the same way as depmod.c does). Signed-off-by: David Marchand <david.marchand@6wind.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>