aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-04ntpd: add experimental patchDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-04ntpd: if peer does not reply anymore, try re-resolving its hostnameDenys Vlasenko
function old new delta ntpd_main 1053 1130 +77 add_peers 166 195 +29 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-04ntpd: do not use a peer more than once (say, if two peers resolve to the ↵Denys Vlasenko
same IP) function old new delta add_peers 98 166 +68 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-03ntpd: more informative poll lowering messageDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-03ifupdowm: fix "warning: unused variable 'iface_list'"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-03dhcpc: Use client IP address as source address for DHCP renew/rebind messagesHans Dedecker
RFC2131 paragraph 4.1 states DHCP messages broadcast by a client prior to that client obtaining its IP address must have the source IP address field in the header set to 0. Request messages transmitted in renewing and rebinding state need to use the obtained IP address as source IP address in the header; this behavior lines up with other implementations like ISC dhcp client. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-01udhcpd: keep expired leases at startupChristian Lindeberg
Let udhcpd retain the information about expired leases when restarting so that the leases are reserved until they possibly become the oldest expired lease. This reduces the frequency of IP address changes for example when the DHCP server and a group of clients, who do not store and request their previously offered IP address across restarts, are collectively restarted and the startup order of the clients are not guaranteed. Signed-off-by: Christian Lindeberg <christian.lindeberg@axis.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-01ifupdown: allow duplicate interface definitionsNicolas Cavallari
This patch allow to have multiple interface definitions, much like Debian's ifupdown. More specifically, it removes the check for a duplicate definition, so the impact on binary size should be fairly minimal. This configuration: iface eth0 inet static address 192.168.0.15 netmask 255.255.0.0 gateway 192.168.0.1 iface eth0 inet static address 10.0.0.1 netmask 255.255.255.0 Will add two addresses to eth0 if ip is used. If ifconfig is used, the standards methods will likely not stack, but the administrator may still use the manual method. The DHCP method may work depending on the DHCP client in use. This is a fairly advanced feature for power users who knows what they are doing. There are not many other network configuration systems that allows multiple addresses on an interface. Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-26udhcpc: fix OPTION_6RD parsing (could overflow its malloced buffer)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-26udhcp: trivial shrinkDenys Vlasenko
function old new delta dname_dec 337 332 -5 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-26taskset: fix non-fancy cpuset printing on big-endianArnout Vandecappelle (Essensium/Mind)
The non-fancy version of the from_cpuset uses CPU_SETSIZE as if it represents the number of bytes in the cpuset, while it is actually the number of bits. This leads to out-of-bounds accesses on the cpu_set_t in the big-endian case. Basically all uses of CPU_SETSIZE have to be divided by 8. This is done correctly in the fancy version of from_cpuset. In addition, the big-endian case is completely wrong to begin with. All standard C libraries that I know of implement cpu_set_t as an unsigned long array, so both for big and little endian, the least significant bits are in the beginning of the array. Therefore, the approach taken for the little endian case is equally valid. We only need special handling for big endian when CPU_SETSIZE is large and we use an unsigned long long to get more bits out. Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-24ntpd: print packet delay in clock update messageDenys Vlasenko
function old new delta update_local_clock 820 826 +6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-12modprobe: only parse files that end in .confMike Frysinger
This matches behavior with kmod which has been the standard for a long time at this point. URL: https://bugs.busybox.net/8021 Reported-by: Jö <jorrit@jorrit.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-02-12build: add a sanitizer debug optionMike Frysinger
Building & running with ASAN is super helpful, so add a dedicated config knob for it. This way people don't have to guess at the right compiler settings in order to get a good build. We can just tell people to enable this one option. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-02-11networking: allow dot at the end of the domain name in dhcp responseDenys Vlasenko
Patch based on Balaji Punnuru <balaji.punnuru@gmail.com> work. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-11init: make the command-line rewrite optionalNicolas Carrier
When launched as PID 1 and after parsing its arguments, init wipes all all of them except argv[0] and rewrites argv[0] to contain only "init", so that its command-line appears solely as "init" in tools such as ps. This patch adds the FEATURE_INIT_MODIFY_CMDLINE which, if set to n, will make init preserve all its arguments including argv[0], be they parsed or ignored. The original command-line used to launch init can then be retrieved in /proc/1/cmdline on Linux, for example. Signed-off-by: Nicolas Carrier <nicolas.carrier@parrot.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-10ntpd: shorter messageDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-10ntpd: step when |offset| > 1 sec, not 0.125 secDenys Vlasenko
update_local_clock 769 820 +51 recv_and_process_peer_pkt 838 862 +24 reset_peer_stats 137 133 -4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 75/-4) Total: 71 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-01busybox: fix uninitialized memory when displaying IPv6 addressesFelix Fietkau
After commit 8e74adab0107658e3dc04ed342206272a284f43e ("libbb: make INET[6]_rresolve use sockaddr2{host,dotted}_noport") INET_sprint6 uses more than just sin6_addr, it also tries to display the scope id, which is uninitialized when called from ife_print6. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-01dd: support iflag=skip_bytesRafał Miłecki
It allows specifying amount of bytes directly (not only amount of blocks) is also supported by GNU's Coreutils. function old new delta parse_comma_flags - 93 +93 static.iflag_words - 12 +12 dd_main 1569 1580 +11 packed_usage 30591 30600 +9 ------------------------------------------------------------------------------ (add/remove: 2/0 grow/shrink: 2/0 up/down: 125/0) Total: 125 bytes Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-01Fix compiling with musl's utmp stubsKylie McClain
This patch fixes compiling busybox with FEATURE_UTMP and _WTMP enabled. musl, while not really support utmp/wtmp, provides stub functions, as well as variables such as _PATH_UTMP, so that programs using utmp or wtmp can still compile fine. My reasoning for this patch is that on Exherbo, I'm currently trying to get us to be able to use the same busybox config file for both glibc and musl systems, using utmp/wtmp on systems that support it, and using the stubs on musl without needing two different configs. As of latest musl git, it provides all utmp functions needed; 1.1.12 doesn't, but I sent a patch to Rich to add the utmp{,x}name functions expected to exist, which was merged into musl upstream. Signed-off-by: Kylie McClain <somasissounds@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-31printf: short-circuit output when argument to %b includes \cRon Yorston
printf wasn't correctly handling \c in an argument to the %b format specifier. printf %bXX OK\\c returned 'OK\cXX' rather than the expected 'OK'. function old new delta printf_main 886 899 +13 Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-24sed: make 's///w FILE' actually write to FILE. Closes 8251Denys Vlasenko
function old new delta add_cmd 1167 1210 +43 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-23patch: correctly handle "patch FILE_TO_PATCH" form. Closes 7736Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-17dos2unix: try to preserve ownership. closes 8311Denys Vlasenko
function old new delta dos2unix_main 426 441 +15 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-17setsid: implement -cDenys Vlasenko
function old new delta setsid_main 53 96 +43 packed_usage 30846 30833 -13 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-13truncate: use O_WRONLY|O_NONBLOCKMike Frysinger
This matches coreutils behavior. We don't read the fd, and truncation does not need blocking. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-01-13truncate: always set mode when opening file to avoid fortify errorsAri Sundholm
Busybox crashes due to no mode being given when opening: $ ./busybox truncate -s 1M foo *** invalid open64 call: O_CREAT without mode ***: ./busybox terminated ======= Backtrace: ========= /lib/x86_64-linux-gnu/libc.so.6(+0x7338f)[0x7f66d921338f] /lib/x86_64-linux-gnu/libc.so.6(__fortify_fail+0x5c)[0x7f66d92aac9c] /lib/x86_64-linux-gnu/libc.so.6(+0xeb6aa)[0x7f66d928b6aa] ./busybox[0x4899f9] ======= Memory map: ======== 00400000-004d0000 r-xp 00000000 00:1a 137559 /home/ari/busybox/busybox 006cf000-006d0000 r--p 000cf000 00:1a 137559 /home/ari/busybox/busybox 006d0000-006d1000 rw-p 000d0000 00:1a 137559 /home/ari/busybox/busybox 006d1000-006d4000 rw-p 00000000 00:00 0 014e7000-01508000 rw-p 00000000 00:00 0 [heap] 7f66d8f8a000-7f66d8fa0000 r-xp 00000000 08:07 1579008 /lib/x86_64-linux-gnu/libgcc_s.so.1 7f66d8fa0000-7f66d919f000 ---p 00016000 08:07 1579008 /lib/x86_64-linux-gnu/libgcc_s.so.1 7f66d919f000-7f66d91a0000 rw-p 00015000 08:07 1579008 /lib/x86_64-linux-gnu/libgcc_s.so.1 7f66d91a0000-7f66d935b000 r-xp 00000000 08:07 1578994 /lib/x86_64-linux-gnu/libc-2.19.so 7f66d935b000-7f66d955a000 ---p 001bb000 08:07 1578994 /lib/x86_64-linux-gnu/libc-2.19.so 7f66d955a000-7f66d955e000 r--p 001ba000 08:07 1578994 /lib/x86_64-linux-gnu/libc-2.19.so 7f66d955e000-7f66d9560000 rw-p 001be000 08:07 1578994 /lib/x86_64-linux-gnu/libc-2.19.so 7f66d9560000-7f66d9565000 rw-p 00000000 00:00 0 7f66d9565000-7f66d966a000 r-xp 00000000 08:07 1579020 /lib/x86_64-linux-gnu/libm-2.19.so 7f66d966a000-7f66d9869000 ---p 00105000 08:07 1579020 /lib/x86_64-linux-gnu/libm-2.19.so 7f66d9869000-7f66d986a000 r--p 00104000 08:07 1579020 /lib/x86_64-linux-gnu/libm-2.19.so 7f66d986a000-7f66d986b000 rw-p 00105000 08:07 1579020 /lib/x86_64-linux-gnu/libm-2.19.so 7f66d986b000-7f66d988e000 r-xp 00000000 08:07 1578981 /lib/x86_64-linux-gnu/ld-2.19.so 7f66d9a64000-7f66d9a67000 rw-p 00000000 00:00 0 7f66d9a8a000-7f66d9a8d000 rw-p 00000000 00:00 0 7f66d9a8d000-7f66d9a8e000 r--p 00022000 08:07 1578981 /lib/x86_64-linux-gnu/ld-2.19.so 7f66d9a8e000-7f66d9a8f000 rw-p 00023000 08:07 1578981 /lib/x86_64-linux-gnu/ld-2.19.so 7f66d9a8f000-7f66d9a90000 rw-p 00000000 00:00 0 7ffc47761000-7ffc47782000 rw-p 00000000 00:00 0 [stack] 7ffc477ab000-7ffc477ad000 r-xp 00000000 00:00 0 [vdso] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] Aborted (core dumped) $ Fix this by simply always setting the mode, as it doesn't hurt even when O_CREAT is not specified. This bug is a regression introduced in fc3e40e, as xopen(), which was originally used, would automatically set the mode. Signed-off-by: Ari Sundholm <ari@tuxera.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2016-01-03login: add commented-out PAM double password avoidance from BZ 4003Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-02nandwrite: implement -n (read/write without ecc)Aaro Koskinen
Implement -n (read/write without ecc). Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-02blkdiscard: new appletAri Sundholm
function old new delta blkdiscard_main - 264 +264 Signed-off-by: Ari Sundholm <ari@tuxera.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-01-02ash: suppress a compilation warningCristian Ionescu-Idbohrn
Reported by gcc (Debian 5.3.1-4) 5.3.1 20151219 shell/ash.c: In function 'evaltree': shell/ash.c:8432:19: warning: logical not is only applied to the left hand side of comparison Signed-off-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-12-30mount: support "nofail" option. Closes 8551Denys Vlasenko
function old new delta singlemount 1045 1060 +15 mount_option_str 338 345 +7 mount_it_now 355 361 +6 mount_options 172 176 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 4/0 up/down: 32/0) Total: 32 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-12-30iproute: support "scope". Closes 8561Denys Vlasenko
function old new delta iproute_modify 1051 1120 +69 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-12-18swaponoff: fix compile-time warningDenys Vlasenko
CC util-linux/swaponoff.o cc1: warnings being treated as errors util-linux/swaponoff.c: In function 'swap_enable_disable': util-linux/swaponoff.c:100: warning: passing argument 1 of 'resolve_mount_spec' from incompatible pointer type make[1]: *** [util-linux/swaponoff.o] Error 1 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-12-18chpasswd: support -c argument and respect DEFAULT_PASSWD_ALGOPascal Bach
Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-12-17include/platform.h: Remove extra #endif introduced in 6df9612.Ari Sundholm
It causes the compilation to fail. Signed-off-by: Ari Sundholm <ari@tuxera.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2015-12-17Resolve linker issues with Android API 21 (dprintf, tcdrain)Chris Renshaw
Signed-off-by: Chris Renshaw <osm0sis@outlook.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-12-16blkid: add bcache supportMike Frysinger
URL: https://bugs.gentoo.org/508596 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2015-12-16swapon/swapoff: refine the -e (ifexists) optionMike Frysinger
The -e option should only apply to swapon, and it should swallow all errors/warnings when the device does not exist. So delete the flag from the swapoff patch and unify the check in the swapoff path. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2015-12-01trylink: include LDFLAGS when checking linkageMike Frysinger
The user might be including options in their LDFLAGS (like -fuse-ld=gold) that change the behavior of the linker and thus change the results of the flag tests. Make sure we include the user's LDFLAGS when running these tests so we filter out flags that will fail when used later on. URL: https://bugs.gentoo.org/499712 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2015-11-06modutils: fix build error with !DEPMODDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-05modutils: merge module_entry and module_info to commonTimo Teräs
This merges the in-memory module info structures of modprobe and depmod. This allows sharing hashing by modulename code improving depmod runtime with almost factor of 2x. function old new delta get_or_add_modentry - 17 +17 do_modprobe 590 601 +11 moddb_get_or_create - 10 +10 load_modules_dep 195 205 +10 moddb_get - 7 +7 add_probe 81 78 -3 modprobe_main 721 714 -7 depmod_main 553 543 -10 config_file_action 434 421 -13 helper_get_module 160 144 -16 parse_module 343 320 -23 order_dep_list 105 82 -23 ------------------------------------------------------------------------------ (add/remove: 3/0 grow/shrink: 2/7 up/down: 55/-95) Total: -40 bytes Signed-off-by: Timo Teräs <timo.teras@iki.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-04TODO file: remove mpstat, iostat, powertop - we have them nowDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-04ash: add support for bash 'function' keywordRon Yorston
Where the POSIX shell allows functions to be defined as: name () compound-command [ redirections ] bash adds the alternative syntax: function name [()] compound-command [ redirections ] Implement this in ash's bash compatibility mode. Most compound commands work (for/while/until/if/case/[[]]/{}); one exception is: function f (echo "no way!") The other two variants work: f() (echo "ok") function f() (echo "also ok") function old new delta parse_command 1555 1744 +189 tokname_array 232 240 +8 .rodata 155612 155566 -46 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 197/-46) Total: 151 bytes Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-04hush-misc/func_args1.tests: remove "UNFIXED BUG", it does not failDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-04ash: copy function tests from hush testsuiteRon Yorston
Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01i2c_tools: suppress "'blen' may be used uninitialized in this function"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01i2cdump: display the numeric value for block read ioctl() errorsBartosz Golaszewski
This makes busybox i2cdump compatible with the upstream version, which also displays the numeric error value in case of a block read failure. Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-11-01i2cdump: bail-out if block read failsBartosz Golaszewski
We should bail-out if i2c_smbus_read_block_data() or i2c_smbus_read_i2c_block_data() return 0 or less. Add the missing check for the former and fix the existing for the latter. Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 20:23:38 +0000