Age | Commit message (Collapse) | Author |
|
packages
function old new delta
unpack_xz_stream 2309 2317 +8
bb_full_fd_action 464 472 +8
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
xmalloc_read_with_initial_buf - 205 +205
setup_transformer_on_fd 154 150 -4
xmalloc_open_zipped_read_close 143 135 -8
xmalloc_read 201 10 -191
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/3 up/down: 205/-203) Total: 2 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Closes 11896
function old new delta
get_next_block 1677 1681 +4
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Embedded scripts require a shell to be present in the BusyBox
binary. Allow either ash or hush to be used for this purpose.
If both are enabled ash takes precedence.
The size of the binary is unchanged in the default configuration:
both ash and hush are present but support for embedded scripts
isn't compiled into hush.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
get_header_tar 1696 1690 -6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
unpack_lzma_stream 2686 2674 -12
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
is_suffixed_with - 54 +54
tar_main 1006 1026 +20
open_transformer 92 79 -13
config_file_action 478 458 -20
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/2 up/down: 74/-33) Total: 41 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Similar code to unpack embedded data is used to decompress usage
messages, embedded scripts and the config file (in the non-default
bbconfig applet).
Moving this code to a common function reduces the size of the default
build and hides more of the internals of libarchive.
function old new delta
unpack_bz2_data - 135 +135
bb_show_usage 137 157 +20
get_script_content 32 47 +15
unpack_scripts 119 - -119
unpack_usage_messages 124 - -124
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 2/0 up/down: 170/-243) Total: -73 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
To assist in the deployment of shell scripts it may be convenient
to embed them in the BusyBox binary.
'Embed scripts in the binary' takes any files in the directory
'embed', concatenates them with null separators, compresses them
and embeds them in the binary.
When scripts are embedded in the binary, scripts can be run as
'busybox SCRIPT [ARGS]' or by usual (sym)link mechanism.
embed/nologin is provided as an example.
function old new delta
packed_scripts - 123 +123
unpack_scripts - 87 +87
ash_main 1103 1171 +68
run_applet_and_exit 78 128 +50
get_script_content - 32 +32
script_names - 10 +10
expmeta 663 659 -4
------------------------------------------------------------------------------
(add/remove: 4/0 grow/shrink: 2/1 up/down: 370/-4) Total: 366 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
unpack_lzma_stream 2669 2686 +17
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
create_or_remember_link - 106 +106
create_links_from_list - 93 +93
find_applet_by_name 124 128 +4
unzip_main 2724 2726 +2
data_extract_all 891 873 -18
create_symlinks_from_list 64 - -64
create_or_remember_symlink 94 - -94
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 2/1 up/down: 205/-176) Total: 29 bytes
Signed-off-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
unpack_lzma_stream 1705 1717 +12
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
static.ar_long_names 4 - -4
static.ar_long_name_size 4 - -4
get_header_ar 546 532 -14
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/1 up/down: 0/-22) Total: -22 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
get_header_ar 434 442 +8
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
unpack_lzma_stream 2647 2653 +6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
As it turns out, longjmp'ing into freed stack is not healthy...
function old new delta
unpack_usage_messages - 97 +97
unpack_bz2_stream 369 409 +40
get_next_block 1667 1677 +10
get_bits 156 155 -1
start_bunzip 212 183 -29
bb_show_usage 181 120 -61
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/3 up/down: 147/-91) Total: 56 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bb_die_memory_exhausted - 10 +10
xstrdup 28 23 -5
xsetenv 27 22 -5
xrealloc 32 27 -5
xputenv 22 17 -5
xmalloc 30 25 -5
xfdopen_helper 40 35 -5
xasprintf 44 39 -5
wget_main 2387 2382 -5
open_socket 54 49 -5
glob_brace 419 414 -5
bb_get_chunk_from_file 146 141 -5
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/11 up/down: 10/-55) Total: -45 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This mostly reverts commit bc9bbeb2b81001e8731cd2ae501c8fccc8d87cc7
"libarchive: do not extract unsafe symlinks unless $EXTRACT_UNSAFE_SYMLINKS=1"
Users report that it is somewhat too restrictive. See
https://bugs.busybox.net/show_bug.cgi?id=8411
In particular, this interferes with unpacking of busybox-based
filesystems with links like "sbin/applet" -> "../bin/busybox".
The change is made smaller by deleting ARCHIVE_EXTRACT_QUIET flag -
it is unused since 2010, and removing conditionals on it
allows commonalizing some error message codes.
function old new delta
create_or_remember_symlink - 94 +94
create_symlinks_from_list - 64 +64
tar_main 1002 1006 +4
unzip_main 2732 2724 -8
data_extract_all 984 891 -93
unsafe_symlink_target 147 - -147
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 1/2 up/down: 162/-248) Total: -86 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=882175
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
gc-6.1.1 x86_64:
function old new delta
generateMTFValues 380 367 -13
gcc-4.3.1 386:
function old new delta
inner_loop - 41 +41
generateMTFValues 357 294 -63
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 41/-63) Total: -22 bytes
gcc-6.3.0 386:
function old new delta
inner_loop - 36 +36
generateMTFValues 363 250 -113
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 36/-113) Total: -77 bytes
The last case, gcc-6.3.0, runs almost 3 times faster after this change.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Corresponding changelog from gzip-1.3.12 reads:
"""
2006-12-20 Paul Eggert <eggert@cs.ucla.edu>
* inflate.c (huft_build): Fix regression that caused gzip to
refuse to uncompress null input (all zero length codes). Problem
reported by Yiorgos Adamopoulos. This regression was caused by
the security patch installed 2006-11-20, which in turn came from
Debian, which in turn apparently came from Thomas Biege of SuSe.
"""
function old new delta
huft_build 1176 1216 +40
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
mainSort 1119 1108 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
BZ2_compressBlock 223 228 +5
BZ2_blockSort 85 88 +3
generateMTFValues 356 357 +1
handle_compress 355 349 -6
compressStream 538 531 -7
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/2 up/down: 9/-13) Total: -4 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
mainGtU 499 515 +16
sendMTFValues 2085 2094 +9
mainSort 1116 1119 +3
generateMTFValues 357 356 -1
fallbackSort 1719 1705 -14
mainQSort3 1163 1141 -22
BZ2_blockSort 118 85 -33
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/4 up/down: 28/-70) Total: -42 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
mainQSort3 1165 1163 -2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
mainSort 1127 1118 -9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
mainSort 1171 1124 -47
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
mainSort 1178 1171 -7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
unsigned
function old new delta
mainSort 1192 1178 -14
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
mainSort 1202 1192 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
generateMTFValues 378 357 -21
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
generateMTFValues 378 368 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
generateMTFValues 433 378 -55
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
sendMTFValues 2051 2085 +34
bsW1_0 - 33 +33
BZ2_compressBlock 225 223 -2
bsW1 52 - -52
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 1/1 up/down: 67/-54) Total: 13 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bsW1 - 52 +52
BZ2_compressBlock 230 225 -5
BZ2_blockSort 125 118 -7
sendMTFValues 2070 2051 -19
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/3 up/down: 52/-31) Total: 21 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
sendMTFValues 2093 2070 -23
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Generic ints/unsigneds are usually fine. Yes, really.
function old new delta
sendMTFValues 2100 2093 -7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|