Age | Commit message (Collapse) | Author |
|
function old new delta
lineedit_read_key 155 162 +7
put_prompt 51 46 -5
read_line_input 3722 3715 -7
cmdedit_setwidth 81 50 -31
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 7/-43) Total: -36 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
(1) restore entire sigaction, not only signal handler function
(2) do not use stdio when not sure WINCH did not interrupt a printf() or such.
function old new delta
cmdedit_setwidth - 81 +81
read_line_input 3682 3722 +40
lineedit_read_key 138 155 +17
put_prompt 55 51 -4
win_changed 93 47 -46
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/2 up/down: 138/-50) Total: 88 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These key combinations should repeat correctly when the keys are
pressed and held.
Before this change, they do this erratically - many repeats are "eaten"
because they are treated as unrecognized ESC seqs:
ESC 0x7f is treated by Alt+baskspace, but ESC 0x7f ESC 0x7f ESC 0x7f
is unrecognized.
Escape sequences corresponding to these key combinations are moved from
read_line_input to lineedit_read_key.
Also, these key sequences are now enabled regardless of whether
FEATURE_EDITING_VI is set, since Vim does not actually support these key
combinations, but they are present in readline library.
function old new delta
static.esccmds 93 103 +10
read_line_input 3737 3687 -50
Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Patch by Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Introduce and use BB_isalnum_or_underscore().
function old new delta
BB_isalnum_or_underscore - 43 +43
vi_word_motion 162 150 -12
vi_end_motion 163 145 -18
vi_back_motion 198 179 -19
BB_isalnum 39 - -39
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 0/3 up/down: 43/-88) Total: -45 bytes
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
run_applet_and_exit 758 755 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-3) Total: -3 bytes
In standalone shell mode the saving increases to 17 bytes.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
In standalone shell mode search the applet table as well as PATH
when tab completing a command.
Use a stupid linear search: we're also about to read all the
directories on PATH so efficiency isn't a big concern.
function old new delta
add_match - 53 +53
complete_cmd_dir_file 687 724 +37
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 90/0) Total: 90 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
is_prefixed_with - 18 +18
complete_username 78 77 -1
man_main 737 735 -2
fsck_device 429 427 -2
unpack_ar_archive 80 76 -4
strip_unsafe_prefix 105 101 -4
singlemount 1054 1050 -4
rtc_adjtime_is_utc 90 86 -4
resolve_mount_spec 88 84 -4
parse_one_line 1029 1025 -4
parse_conf 1460 1456 -4
may_wakeup 83 79 -4
loadkmap_main 219 215 -4
get_irqs_from_stat 103 99 -4
get_header_cpio 913 909 -4
findfs_main 79 75 -4
fbsplash_main 1230 1226 -4
load_crontab 776 771 -5
expand_vars_to_list 1151 1146 -5
date_main 881 876 -5
skip_dev_pfx 30 24 -6
make_device 2199 2193 -6
complete_cmd_dir_file 773 767 -6
run_applet_and_exit 715 708 -7
uudecode_main 321 313 -8
pwdx_main 197 189 -8
execute 568 560 -8
i2cdetect_main 1186 1176 -10
procps_scan 1242 1230 -12
procps_read_smaps 1017 1005 -12
process_module 746 734 -12
patch_main 1903 1891 -12
nfsmount 3572 3560 -12
stack_machine 126 112 -14
process_timer_stats 449 435 -14
match_fstype 111 97 -14
do_ipaddr 1344 1330 -14
open_list_and_close 359 343 -16
get_header_tar 1795 1779 -16
prepend_new_eth_table 340 323 -17
fsck_main 1811 1794 -17
find_iface_state 56 38 -18
dnsd_main 1321 1303 -18
base_device 179 158 -21
find_keyword 104 82 -22
handle_incoming_and_exit 2785 2762 -23
parse_and_put_prompt 774 746 -28
modinfo 347 317 -30
find_action 204 171 -33
update_passwd 1470 1436 -34
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/49 up/down: 18/-540) Total: -522 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
massage_data_for_non_r_func - 90 +90
bb_internal_getpwent - 69 +69
getXXnam_r 94 162 +68
fill_bounds 131 128 -3
deluser_main 355 310 -45
complete_username 123 78 -45
getXXnam 163 90 -73
massage_data_for_r_func 103 - -103
bb_internal_getpwent_r 121 - -121
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 1/5 up/down: 227/-407) Total: -163 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
In vi-mode lineedit tries to detect some escape sequences.
After the ESC it reads the next character to check for certain
values. This read should have a timeout or a user-entered ESC to
switch to command mode doesn't properly handle the next character.
Signed-off-by: Ron Yorston <rmy@tigress.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Testcase: shell command input after python ^Z should still work
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
parse_and_put_prompt 755 774 +19
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
unicode_strlen - 31 +31
read_line_input 3876 3879 +3
lineedit_read_key 255 246 -9
parse_and_put_prompt 785 755 -30
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/2 up/down: 34/-39) Total: -5 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
show_history - 39 +39
builtin_history - 16 +16
historycmd - 13 +13
bltins1 312 324 +12
builtintab 336 344 +8
popstring 134 140 +6
hush_main 1048 1046 -2
ash_main 1398 1396 -2
size_from_HISTFILESIZE 44 40 -4
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 3/3 up/down: 94/-8) Total: 86 bytes
Signed-off-by: Flemming Madsen <busybox@themadsens.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
parse_and_put_prompt 793 785 -8
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
parse_and_put_prompt 742 793 +51
read_line_input 3836 3826 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Based on the patch by Arnaud RĂ©billout <rebillout@syscom.ch>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
In vi mode, the 'p' and 'P' commands caused a segfault when nothing had
been put in the buffer yet because the delptr was not initialized.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Cliff Frey <cliff@meraki.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When CONFIG_FEATURE_EDITING_SAVE_ON_EXIT is set to y, the histfile
will get cleared if the total amount of history lines is less than MAX_HISTORY.
Only if the histfile is not empty _and_ the amount of lines currently
in memory are equal to or greater than MAX_HISTORY, history saving will
work as expected with this feature enabled.
Output from defconfig + CONFIG_FEATURE_EDITING_SAVE_ON_EXIT=y:
$ echo "foo" > ~/.ash_history
$ ./busybox ash
~/busybox/a $ echo "bar" > /dev/null
~/busybox/a $ exit
$ cat ~/.ash_history
$
Output with the patch applied and same config as above:
$ echo "foo" > ~/.ash_history
$ ./busybox ash
~/busybox/b $ echo "bar" > /dev/null
~/busybox/b $ exit
$ cat ~/.ash_history
foo
echo "bar" > /dev/null
exit
$
Signed-off-by: Dennis Groenen <tj.groenen at gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
First change fixes "read -n NUM". Apparently poll() won't report
data availability if cc[VMIN] > 1 until there are at least cc[VMIN] bytes.
function old new delta
read_line_input 3885 3877 -8
shell_builtin_read 1097 1087 -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-18) Total: -18 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
ctrl_left - 96 +96
ctrl_right - 76 +76
static.esccmds 81 93 +12
read_line_input 3876 3885 +9
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 2/0 up/down: 193/0) Total: 193 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Based on the patch by Dennis Groenen <tj.groenen@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
read_line_input 3433 3957 +524
load_string 77 90 +13
input_tab 1086 1069 -17
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 537/-17) Total: 520 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Alexey Fomenko <ext-alexey.fomenko@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Based on patch from Alexey Fomenko (ext-alexey.fomenko AT nokia.com)
function old new delta
size_from_HISTFILESIZE - 44 +44
hush_main 998 1025 +27
ash_main 1348 1374 +26
read_line_input 3361 3372 +11
new_line_input_t 17 24 +7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
load_string 45 91 +46
save_string 40 82 +42
reinit_unicode 34 61 +27
BB_PUTCHAR 97 120 +23
init_unicode 17 37 +20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 158/0) Total: 158 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
pgetc 420 500 +80
readtoken1 3202 3239 +37
read_line_input 3316 3337 +21
udhcpc_main 2610 2630 +20
file_get 266 272 +6
expandarg 958 963 +5
localcmd 257 259 +2
addLines 85 87 +2
read_line 94 95 +1
ed_main 2540 2541 +1
timed_out 1 - -1
lineedit_read_key 256 255 -1
alrm_sighandler 44 - -44
cmdloop 539 434 -105
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 10/2 up/down: 175/-151) Total: 24 bytes
text data bss dec hex filename
887379 936 17200 905515 dd12b busybox_old
887411 936 17192 905539 dd143 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Using ash in busybox git version dea28e1e, tab completion doesn't seem
to work properly for filenames that have special characters (such as
spaces) in them. For example, with filenames "foo bar" and "foo zap",
typing "ls fo<TAB>" correctly expands to "ls foo\ ", but then
continuing to type "b<TAB>" will produce "ls foo\ bbar", which is not
correct (the 'b' is duplicated).
Signed-off-by: Mike Shal <marfey@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
While at it, make ESC sequences more readable; and removed check for
isatty(stdin) in reset. Code shrink:
text data bss dec hex filename
884771 936 17216 902923 dc70b busybox_old
884723 936 17216 902875 dc6db busybox_unstripped
Signed-off-by: Marek Polacek <mmpolacek@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
function old new delta
complete_cmd_dir_file 731 730 -1
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
function old new delta
input_tab 1027 1041 +14
build_match_prefix 590 562 -28
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 14/-28) Total: -14 bytes
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
function old new delta
input_tab 1016 1012 -4
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Now it is allocated temporarily only for the duretion of prefix generation,
and also we only allocate the needed size, not maximally possible.
function old new delta
build_match_prefix 579 590 +11
remove_chunk 43 28 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 11/-15) Total: -4 bytes
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
pos_buf is a strange hack, easy to do without it.
This also allows lines >32k long to be handled.
Also simplified match prefix generations and made behavior more like bash.
function old new delta
remove_chunk - 43 +43
collapse_pos 79 - -79
build_match_prefix 804 579 -225
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 0/1 up/down: 43/-304) Total: -261 bytes
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
This kills horrific logic which deletes and re-adds prefix (!)
function old new delta
complete_cmd_dir_file 705 731 +26
complete_username 121 124 +3
input_tab 1041 1016 -25
build_match_prefix 838 804 -34
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/2 up/down: 29/-59) Total: -30 bytes
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Noted bugs in behavior.
Added debugging machinery.
Decoupled variables reused for unrelated purposes: apparently,
when not forced to use liveness analysis, gcc fares better.
function old new delta
complete_cmd_dir_file 699 705 +6
collapse_pos 75 79 +4
build_match_prefix 892 838 -54
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 10/-54) Total: -44 bytes
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
renames and deinlines a few functions
function old new delta
input_tab - 1041 +1041
complete_cmd_dir_file - 699 +699
complete_username - 121 +121
username_completion 121 - -121
read_line_input 5002 3313 -1689
------------------------------------------------------------------------------
(add/remove: 3/1 grow/shrink: 0/1 up/down: 1861/-1810) Total: 51 bytes
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|