Age | Commit message (Collapse) | Author |
|
"error: taking address of packed member of 'struct ip_udp_dhcp_packet'
may result in an unaligned pointer value" here:
udhcp_dump_packet(&packet.data);
and in other places.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Added an option scanner to udhcp to enable iteration over packet options.
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
len_of_option_as_string 14 13 -1
dhcp_option_lengths 14 13 -1
udhcp_str2optset 641 637 -4
static.xmalloc_optname_optval 777 718 -59
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-65) Total: -65 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
attach_option 411 406 -5
dname_enc 381 167 -214
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-219) Total: -219 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.
This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.
The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)
function old new delta
bb_info_msg - 182 +182
bb_vinfo_msg - 27 +27
static.log7 194 198 +4
log8 190 191 +1
log5 190 191 +1
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes
If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:
function old new delta
static.log7 194 200 +6
log8 190 193 +3
log5 190 193 +3
syslog_level 1 - -1
bb_verror_msg 583 581 -2
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Support for the IEEE timezone string and timezone database strings (100
and 101 options respectively) is added for ipv4, conforming to RFC-4833.
The two options are passed to hook scripts in the variables tzstr and
tzdbstr.
function old new delta
dhcp_option_strings 280 294 +14
dhcp_optflags 76 80 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 18/0) Total: 18 bytes
Signed-off-by: Antoine Girard-Vallée <antoine.girard-vallee@savoirfairelinux.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_run_script 795 801 +6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_get_option32 - 27 +27
udhcp_get_option 231 248 +17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 44/0) Total: 44 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
As defined in RFC 5071.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This reverts "udhcpc: paranoia when using kernel UDP mode
for sending renew: server ID may be bogus".
Users complain that they do have servers behind routers
(with DHCP relays).
function old new delta
send_packet 168 166 -2
bcast_or_ucast 25 23 -2
udhcp_send_kernel_packet 301 295 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10) Total: -10 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Last foru commits:
function old new delta
option_to_env 621 791 +170
.rodata 168351 168505 +154
attach_option 431 506 +75
add_d6_client_options 112 167 +55
d6_option_strings 30 84 +54
udhcp_str2optset 644 660 +16
d6_optflags 12 20 +8
udhcpc6_main 2590 2596 +6
udhcpc_main 2648 2651 +3
read_optset 15 18 +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 10/0 up/down: 544/0) Total: 544 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Fixes:
commit 52a515d18724bbb34e3ccbbb0218efcc4eccc0a8
"udhcp: use poll() instead of select()"
Feb 16 2017
udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read.
In the above commit, it was changed as follows:
- if (!FD_ISSET(signal_pipe.rd, rfds))
+ if (!pfds[0].revents)
return 0;
The problem is, the check was working for select() purely by accident.
Caught signal interrupts select()/poll() syscalls, they return with EINTR
(regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked.
IOW: they can't see any changes to fd state caused by signal haldler
(in our case, signal handler makes signal pipe ready to be read).
For select(), it means that rfds[] bit array is unmodified, bit of signal
pipe's read fd is still set, and the above check "works": it thinks select()
says there is data to read.
This accident does not work for poll(): .revents stays clear, and we do not
try reading signal pipe as we should. In udhcpd, we fall through and block
in socket read. Further SIGTERM signals simply cause socket read to be
interrupted and then restarted (since SIGTERM handler has SA_RESTART=1).
Fixing this as follows: remove the check altogether. Set signal pipe read fd
to nonblocking mode. Always read it in udhcp_sp_read().
If read fails, assume it's EAGAIN and return 0 ("no signal seen").
udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR
(using safe_poll()) - thus ensuring we have correct .revents for all fds -
and calling udhcp_sp_read() only if pfds[0].revents!=0.
udhcpc performs much fewer reads (typically it sleeps >99.999% of the time),
there is no need to optimize it: can call udhcp_sp_read() after each poll
unconditionally.
To robustify socket reads, unconditionally set pfds[1].revents=0
in udhcp_sp_fd_set() (which is before poll), and check it before reading
network socket in udhcpd.
TODO:
This might still fail: if pfds[1].revents=POLLIN, socket read may still block.
There are rare cases when select/poll indicates that data can be read,
but then actual read still blocks (one such case is UDP packets with
wrong checksum). General advise is, if you use a poll/select loop,
keep all your fds nonblocking.
Maybe we should also do that to our network sockets?
function old new delta
udhcp_sp_setup 55 65 +10
udhcp_sp_fd_set 54 60 +6
udhcp_sp_read 46 36 -10
udhcpd_main 1451 1437 -14
udhcpc_main 2723 2708 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
be bogus
With new code, we request that target IP (server ID) must be directly reachable.
If it's not, this happens:
udhcpc: waiting 2000 seconds
udhcpc: entering listen mode: kernel
udhcpc: opening listen socket on *:68 wlan0
udhcpc: entering renew state
udhcpc: sending renew to 1.1.1.1
udhcpc: send: Network is unreachable
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy!
udhcpc: entering rebinding state
udhcpc: entering listen mode: raw
udhcpc: created raw socket
udhcpc: sending renew to 0.0.0.0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast
which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed
over eth0 (!) and maybe even into Internet (!!!).
function old new delta
udhcpc_main 2752 2763 +11
udhcp_send_kernel_packet 295 301 +6
send_renew 82 84 +2
send_packet 166 168 +2
bcast_or_ucast 23 25 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Patch is based on work by tiggerswelt.net.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_sp_read 65 46 -19
udhcp_sp_fd_set 79 54 -25
udhcpd_main 1530 1482 -48
udhcpc_main 2780 2730 -50
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-142) Total: -142 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The config item is FEATURE_USE_BSS_TAIL. When it is off (default):
function old new delta
read_config 210 228 +18
doCommands 2279 2294 +15
ipneigh_list_or_flush 763 772 +9
ipaddr_list_or_flush 1256 1261 +5
display_process_list 1301 1306 +5
conspy_main 1378 1383 +5
do_lzo_compress 352 355 +3
do_lzo_decompress 565 567 +2
push 46 44 -2
inetd_main 2136 2134 -2
uevent_main 421 418 -3
addLines 97 92 -5
bb_common_bufsiz1 8193 1024 -7169
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181) Total: -7119 bytes
text data bss dec hex filename
829850 4086 9080 843016 cdd08 busybox_old
829901 4086 1904 835891 cc133 busybox_unstripped
FEATURE_USE_BSS_TAIL=y:
read_config 210 228 +18
doCommands 2279 2294 +15
ipneigh_list_or_flush 763 772 +9
ipaddr_list_or_flush 1256 1261 +5
display_process_list 1301 1306 +5
conspy_main 1378 1383 +5
do_lzo_compress 352 355 +3
do_lzo_decompress 565 567 +2
inetd_main 2136 2134 -2
bb_common_bufsiz1 8193 - -8193
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195) Total: -8133 bytes
text data bss dec hex filename
829850 4086 9080 843016 cdd08 busybox_old
829911 4086 880 834877 cbd3d busybox_unstripped
FIXME: setup_common_bufsiz() calls are missing.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcpd_main 1501 1531 +30
d6_recv_raw_packet 251 264 +13
perform_d6_release 188 198 +10
udhcpc6_main 2443 2449 +6
udhcp_recv_raw_packet 582 588 +6
udhcp_recv_kernel_packet 132 138 +6
send_d6_renew 140 146 +6
d6_recv_kernel_packet 118 124 +6
send_renew 77 82 +5
send_discover 85 90 +5
send_decline 84 89 +5
send_d6_select 97 102 +5
send_d6_discover 174 179 +5
perform_release 167 172 +5
count_lines 72 74 +2
udhcpc_main 2836 2837 +1
bb_info_msg 125 - -125
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 17/4 up/down: 117/-180) Total: -63 bytes
text data bss dec hex filename
924935 906 17160 943001 e6399 busybox_old
924736 906 17160 942802 e62d2 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Some clients have a very short timeout for sending the DHCP
DISCOVER, shorter than the arpping timeout of 2000 milliseconds
that udhcpd uses by default.
This patch allows tweaking the timeout, or disabling of arpping
altogether, at the risk of handing out addresses which are
already in use.
function old new delta
udhcpd_main 1460 1501 +41
udhcpc_main 2814 2851 +37
packed_usage 29957 29974 +17
arpping 477 493 +16
find_free_or_expired_nip 161 174 +13
send_offer 285 292 +7
nobody_responds_to_arp 85 89 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0) Total: 135 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Like d3092c99, this change adds support for the DHCP "path-prefix"
option, as defined in RFC 5071. We use the string identifer
"pxepathprefix".
Adding this option makes string parsing in the hook scripts simpler.
function old new delta
dhcp_option_strings 255 269 +14
dhcp_optflags 72 74 +2
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This change adds a definition for DHCP option 209. RFC 5071 defines code
209 as a configuration file for a PXE bootloader; this change uses
the string "pxeconffile" as its text identifier.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The following options are replaced with string "bad" if they
contain malformed hostname:
HOST_NAME, DOMAIN_NAME, NIS_DOMAIN, TFTP_SERVER_NAME
function old new delta
xmalloc_optname_optval 850 888 +38
attach_option 440 443 +3
len_of_option_as_string 13 14 +1
dhcp_option_lengths 13 14 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 43/0) Total: 43 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The patch is from OpenWRT people.
function old new delta
xmalloc_optname_optval 637 874 +237
dhcp_option_strings 237 243 +6
dhcp_optflags 68 70 +2
len_of_option_as_string 12 13 +1
dhcp_option_lengths 12 13 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 247/0) Total: 247 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Leonid Lisovskiy <lly.dev@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
dhcp_option_strings 217 237 +20
dhcp_optflags 64 68 +4
Signed-off-by: Nigel Hathaway <Nigel.Hathaway@ubiquisys.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
Signed-off-by: Vladislav Grishenko <themiron@mail.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This change retains "or later" state! No licensing _changes_ here,
only form is adjusted (article, space between "GPL" and "v2" and so on).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_run_script 654 617 -37
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
allocate_tempopt_if_needed - 76 +76
udhcp_str2optset 351 415 +64
attach_option 380 398 +18
len_of_option_as_string 11 12 +1
dhcp_option_lengths 11 12 +1
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 4/0 up/down: 160/0) Total: 160 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_option_idx - 77 +77
udhcp_str2optset 366 351 -15
udhcpc_main 2845 2801 -44
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/2 up/down: 77/-59) Total: 18 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
dumpleases_main 632 623 -9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This is needed for "overflow option" support
function old new delta
udhcp_find_option - 34 +34
udhcp_add_binary_option 94 106 +12
write_leases 227 223 -4
udhcp_init_header 86 82 -4
send_release 104 99 -5
init_packet 87 81 -6
add_client_options 160 154 -6
add_server_options 100 92 -8
udhcpd_main 1964 1954 -10
udhcpc_main 2859 2837 -22
find_option 34 - -34
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 1/8 up/down: 46/-99) Total: -53 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_add_binary_option - 94 +94
udhcp_str2nip - 42 +42
len_of_option_as_string 12 10 -2
dhcp_option_lengths 12 10 -2
udhcpc_main 2859 2851 -8
read_nip 42 - -42
xmalloc_optname_optval 590 536 -54
udhcp_str2optset 443 366 -77
udhcp_add_option_string 86 - -86
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 0/5 up/down: 136/-271) Total: -135 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_str2optset - 443 +443
add_client_options - 160 +160
udhcpc_main 2753 2857 +104
packed_usage 26670 26689 +19
attach_option 380 385 +5
udhcpd_main 1964 1965 +1
udhcp_add_option_string 94 86 -8
add_param_req_option 128 - -128
read_opt 443 - -443
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 4/1 up/down: 732/-579) Total: 153 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
also gets rid of ether-aton's static buffer in ether-wake:
text data bss dec hexfilename
838664 441 7572 846677 ceb55busybox_old
838650 441 7564 846655 ceb3fbusybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|