aboutsummaryrefslogtreecommitdiff
path: root/networking/udhcp/d6_dhcpc.c
AgeCommit message (Collapse)Author
2021-02-21udhcp: reuse stringsDenys Vlasenko
text data bss dec hex filename 1019916 559 5020 1025495 fa5d7 busybox_old 1019906 559 5020 1025485 fa5cd busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2021-01-01udhcpc: Add support to change default interface nameAndre Kalb
Signed-off-by: Andre Kalb <Andre.Kalb@sma.de> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-12-18help text: use -P PORT formDenys Vlasenko
function old new delta packed_usage 33502 33491 -11 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-12-15udhcpc6: code shrink - sending functions do not need ifindex parameterDenys Vlasenko
function old new delta d6_send_raw_packet_from_client_data_ifindex - 427 +427 d6_send_kernel_packet_from_client_data_ifindex - 275 +275 send_d6_renew 182 176 -6 perform_d6_release 246 240 -6 d6_mcast_from_client_data_ifindex 45 39 -6 d6_send_kernel_packet 274 - -274 d6_send_raw_packet 429 - -429 ------------------------------------------------------------------------------ (add/remove: 2/2 grow/shrink: 0/3 up/down: 702/-721) Total: -19 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-10-01gcc-9.x warning fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-06-21udhcpc6: use correct multicast MACUwe Glaeser
function old new delta static.MAC_DHCP6MCAST_ADDR - 6 +6 Signed-off-by: Uwe Glaeser <uwe.glaeser@dormakaba.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-24udhcpc6: add ELAPSED_TIME option to outgoing packetsDenys Vlasenko
function old new delta init_d6_packet 53 121 +68 udhcpc_main 2577 2582 +5 udhcpc6_main 2593 2597 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/0 up/down: 77/0) Total: 77 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-08-24udhcpc6: support stateless DHCPv6Eivind Versvik
-l will send Information-Request to request configuration parameters function old new delta packed_usage 33114 33180 +66 send_d6_info_request - 62 +62 udhcpc6_main 2534 2593 +59 udhcpc6_longopts 199 211 +12 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 3/0 up/down: 199/0) Total: 199 bytes Signed-off-by: Eivind Versvik <versvikeivind@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02libbb: reduce the overhead of single parameter bb_error_msg() callsJames Byrne
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower overhead call to bb_perror_msg() when only a string was being printed with no parameters. This saves space for some CPU architectures because it avoids the overhead of a call to a variadic function. However there has never been a simple version of bb_error_msg(), and since 2007 many new calls to bb_perror_msg() have been added that only take a single parameter and so could have been using bb_simple_perror_message(). This changeset introduces 'simple' versions of bb_info_msg(), bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and bb_herror_msg_and_die(), and replaces all calls that only take a single parameter, or use something like ("%s", arg), with calls to the corresponding 'simple' version. Since it is likely that single parameter calls to the variadic functions may be accidentally reintroduced in the future a new debugging config option WARN_SIMPLE_MSG has been introduced. This uses some macro magic which will cause any such calls to generate a warning, but this is turned off by default to avoid use of the unpleasant macros in normal circumstances. This is a large changeset due to the number of calls that have been replaced. The only files that contain changes other than simple substitution of function calls are libbb.h, libbb/herror_msg.c, libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c, networking/udhcp/common.h and util-linux/mdev.c additonal macros have been added for logging so that single parameter and multiple parameter logging variants exist. The amount of space saved varies considerably by architecture, and was found to be as follows (for 'defconfig' using GCC 7.4): Arm: -92 bytes MIPS: -52 bytes PPC: -1836 bytes x86_64: -938 bytes Note that for the MIPS architecture only an exception had to be made disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h) because it made these files larger on MIPS. Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-06-11udhcpc6: fix aliasing warningDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-31dhcp: downgrade "got raw socket fd" message to log3, make log2 default maxDenys Vlasenko
log3 messages are very much redundant function old new delta change_listen_mode 322 302 -20 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-31dhcp: get rid of static data signal_pipeDenys Vlasenko
function old new delta udhcp_sp_setup 65 110 +45 udhcp_sp_fd_set 60 59 -1 udhcpd_main 1442 1437 -5 udhcpc_main 2684 2679 -5 signal_pipe 8 - -8 packed_usage 33292 33284 -8 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 1/4 up/down: 45/-27) Total: 18 bytes text data bss dec hex filename 952746 481 7296 960523 ea80b busybox_old 952768 481 7288 960537 ea819 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26udhcp: rename client_config to client_data, server_config to server_dataDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26dhcp: get rid of last global dataDenys Vlasenko
function old new delta udhcpc_main 2680 2684 +4 state 1 - -1 listen_mode 1 - -1 sockfd 4 - -4 ------------------------------------------------------------------------------ (add/remove: 0/3 grow/shrink: 1/0 up/down: 4/-6) Total: -2 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-15udhcpc6: unbreakDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-30Optionally re-introduce bb_info_msg()James Byrne
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was eliminated and calls to it changed to be bb_error_msg(). The downside of this is that daemons now log all messages to syslog at the LOG_ERR level which makes it hard to filter errors from informational messages. This change optionally re-introduces bb_info_msg(), controlled by a new option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that were removed (only in applets that set logmode to LOGMODE_SYSLOG or LOGMODE_BOTH), and also changes informational messages in ifplugd and ntpd. The code size change of this is as follows (using 'defconfig' on x86_64 with gcc 7.3.0-27ubuntu1~18.04) function old new delta bb_info_msg - 182 +182 bb_vinfo_msg - 27 +27 static.log7 194 198 +4 log8 190 191 +1 log5 190 191 +1 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes If you don't care about everything being logged at LOG_ERR level then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller: function old new delta static.log7 194 200 +6 log8 190 193 +3 log5 190 193 +3 syslog_level 1 - -1 bb_verror_msg 583 581 -2 crondlog 45 - -45 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes Signed-off-by: James Byrne <james.byrne@origamienergy.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-14udhcpc6: code shrinkDenys Vlasenko
function old new delta d6_read_interface 593 582 -11 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-13udhcpc6: add a few comments, no code changes.Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-13udhcpc6: make it enabled in defconfigDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-02-27udhcpc: don't exit after backgrounding on -n -bAndrey Mazo
Currently, running "udhcpc -n -b" causes udhcpc to go to background and then exit after some time unless a lease is obtained. It's not very useful to do so as the calling process doesn't know if the lease was obtained or not anyway. The code actually tries to favor "-b" over "-n", but doesn't clear "-n" flag while clearing "-b" after backgrounding. So, clear "-n" flag after going into background. This effectively makes "-b" override "-n" completely and "-n -b" behave the same as "-b". This allows to override default "-n" option, passed to udhcpc by ifupdown, without recompiling busybox. URL: https://bugs.busybox.net/11691 Signed-off-by: Andrey Mazo <ahippo@yandex.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-12-28config: update size informationDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-11-03udhcpc: code shrinkDenys Vlasenko
function old new delta perform_release 112 172 +60 send_release 81 - -81 ------------------------------------------------------------------------------ (add/remove: 0/1 grow/shrink: 1/0 up/down: 60/-81) Total: -21 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-10-30udhcpc: ensure at least one unicast renew attemptDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-09-28udhcpc: give SIGUSR1-induced renew one chance of unicast renewDenys Vlasenko
The caps were inconsistent: timeout to renew was capped at 20 seconds, and any renews with timeout <= 60 seconds were forced to broadcast. function old new delta udhcpc_main 2683 2680 -3 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-06-21udhcpc: remove code which requires server ID to be on local networkDenys Vlasenko
This reverts "udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may be bogus". Users complain that they do have servers behind routers (with DHCP relays). function old new delta send_packet 168 166 -2 bcast_or_ucast 25 23 -2 udhcp_send_kernel_packet 301 295 -6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10) Total: -10 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-24udhcpc6: carry along length of packet when parsing it.David Decotigny
This is to avoid parsing garbage past packet's actual end. Also const-ize params to a few functions. function old new delta d6_run_script_no_option - 12 +12 option_to_env 791 798 +7 d6_run_script 253 255 +2 perform_d6_release 95 93 -2 udhcpc6_main 2596 2592 -4 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 2/2 up/down: 21/-6) Total: 15 bytes Signed-off-by: David Decotigny <ddecotig@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-24udhcpc6: ignore invalid OPTION_IAADDRDavid Decotigny
Signed-off-by: David Decotigny <ddecotig@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-14udhcpc6: set -x options in requestDenys Vlasenko
Last foru commits: function old new delta option_to_env 621 791 +170 .rodata 168351 168505 +154 attach_option 431 506 +75 add_d6_client_options 112 167 +55 d6_option_strings 30 84 +54 udhcp_str2optset 644 660 +16 d6_optflags 12 20 +8 udhcpc6_main 2590 2596 +6 udhcpc_main 2648 2651 +3 read_optset 15 18 +3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 10/0 up/down: 544/0) Total: 544 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-14udhcpc6: add PXELINUX optionsSamuel Mendoza-Jonas
Add support for the PXELINUX options 209 ("ConfigFile") and 210 ("PathPrefix") in the DHCPv6 client. See also: RFC5071, "Dynamic Host Configuration Protocol Options Used by PXELINUX". Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-14udhcpc6: add DHCPv6 boot optionsSamuel Mendoza-Jonas
Add support for 'bootfile-url' and 'bootfile-params' as defined by RFC5970 "DHCPv6 Options for Network Boot". Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-05-14udhcpc6: add DHCPv6 env helperSamuel Mendoza-Jonas
Add string_option_to_env() to easily generate environment variables for known simple options. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-04-13udhcp: support string user options, closes 10946Denys Vlasenko
function old new delta udhcp_str2optset 536 628 +92 packed_usage 32757 32760 +3 udhcpc_main 2708 2692 -16 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 95/-16) Total: 79 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-03-10udhcpd: fix "not dying on SIGTERM"Denys Vlasenko
Fixes: commit 52a515d18724bbb34e3ccbbb0218efcc4eccc0a8 "udhcp: use poll() instead of select()" Feb 16 2017 udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read. In the above commit, it was changed as follows: - if (!FD_ISSET(signal_pipe.rd, rfds)) + if (!pfds[0].revents) return 0; The problem is, the check was working for select() purely by accident. Caught signal interrupts select()/poll() syscalls, they return with EINTR (regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked. IOW: they can't see any changes to fd state caused by signal haldler (in our case, signal handler makes signal pipe ready to be read). For select(), it means that rfds[] bit array is unmodified, bit of signal pipe's read fd is still set, and the above check "works": it thinks select() says there is data to read. This accident does not work for poll(): .revents stays clear, and we do not try reading signal pipe as we should. In udhcpd, we fall through and block in socket read. Further SIGTERM signals simply cause socket read to be interrupted and then restarted (since SIGTERM handler has SA_RESTART=1). Fixing this as follows: remove the check altogether. Set signal pipe read fd to nonblocking mode. Always read it in udhcp_sp_read(). If read fails, assume it's EAGAIN and return 0 ("no signal seen"). udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR (using safe_poll()) - thus ensuring we have correct .revents for all fds - and calling udhcp_sp_read() only if pfds[0].revents!=0. udhcpc performs much fewer reads (typically it sleeps >99.999% of the time), there is no need to optimize it: can call udhcp_sp_read() after each poll unconditionally. To robustify socket reads, unconditionally set pfds[1].revents=0 in udhcp_sp_fd_set() (which is before poll), and check it before reading network socket in udhcpd. TODO: This might still fail: if pfds[1].revents=POLLIN, socket read may still block. There are rare cases when select/poll indicates that data can be read, but then actual read still blocks (one such case is UDP packets with wrong checksum). General advise is, if you use a poll/select loop, keep all your fds nonblocking. Maybe we should also do that to our network sockets? function old new delta udhcp_sp_setup 55 65 +10 udhcp_sp_fd_set 54 60 +6 udhcp_sp_read 46 36 -10 udhcpd_main 1451 1437 -14 udhcpc_main 2723 2708 -15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-02-07udhcp: do not setlinebuf(stdout), we don't print to stdout anymoreDenys Vlasenko
Since bb_info_msg() was eliminated type of buffering on stdout is not important function old new delta udhcpd_main 1463 1451 -12 udhcpc_main 2735 2723 -12 setlinebuf 19 - -19 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 0/2 up/down: 0/-43) Total: -43 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-19udhcpc6: fix for ppp interface typeDenys Vlasenko
function old new delta d6_read_interface 454 600 +146 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-17udhcpc[6]: remove overzealous timeout clamping codeDenys Vlasenko
function old new delta udhcpc_main 2840 2826 -14 udhcpc6_main 2699 2670 -29 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-16udhcpc6: --help fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-16udhcpc6: show only short opts in --help textDenys Vlasenko
function old new delta packed_usage 26028 25966 -62 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-16udhcpc6: fix lease time staying very small because -d was not specifiedDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-16udhcpc6: code shrinkDenys Vlasenko
function old new delta udhcpc6_main 2723 2727 +4 .rodata 128695 128561 -134 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-16udhcpc6: add support of prefix delegationDenys Vlasenko
Based on patch by DannyAAM <danny@saru.moe> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-16udhcpc6: preparatory patch, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-16udhcpc6: fix ipv6prefix[_lease] envvar value in script invocationDenys Vlasenko
Based on a patch by DannyAAM <danny@saru.moe>. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29use %m printf specifier where appropriateDenys Vlasenko
function old new delta out 85 75 -10 udhcpd_main 1472 1461 -11 open_stdio_to_tty 98 85 -13 init_exec 245 232 -13 udhcpc_main 2763 2749 -14 do_cmd 4771 4755 -16 status_line_bold_errno 32 14 -18 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-95) Total: -95 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may ↵Denys Vlasenko
be bogus With new code, we request that target IP (server ID) must be directly reachable. If it's not, this happens: udhcpc: waiting 2000 seconds udhcpc: entering listen mode: kernel udhcpc: opening listen socket on *:68 wlan0 udhcpc: entering renew state udhcpc: sending renew to 1.1.1.1 udhcpc: send: Network is unreachable ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy! udhcpc: entering rebinding state udhcpc: entering listen mode: raw udhcpc: created raw socket udhcpc: sending renew to 0.0.0.0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed over eth0 (!) and maybe even into Internet (!!!). function old new delta udhcpc_main 2752 2763 +11 udhcp_send_kernel_packet 295 301 +6 send_renew 82 84 +2 send_packet 166 168 +2 bcast_or_ucast 23 25 +2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc[6]: initialize entire sockaddr_llDenys Vlasenko
I see random field values like sll_hatype=0x267 when I strace. They seem to not matter, but just in case they sometimes do, let's at least have deterministic values (via memset(0)). function old new delta change_listen_mode 308 322 +14 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-18regularize format of source file headers, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08getopt32: remove opt_complementaryDenys Vlasenko
function old new delta vgetopt32 1318 1392 +74 runsvdir_main 703 713 +10 bb_make_directory 423 425 +2 collect_cpu 546 545 -1 opt_chars 3 - -3 opt_complementary 4 - -4 tftpd_main 567 562 -5 ntp_init 476 471 -5 zcip_main 1266 1256 -10 xxd_main 428 418 -10 whois_main 140 130 -10 who_main 463 453 -10 which_main 212 202 -10 wget_main 2535 2525 -10 watchdog_main 291 281 -10 watch_main 222 212 -10 vlock_main 399 389 -10 uuencode_main 332 322 -10 uudecode_main 316 306 -10 unlink_main 45 35 -10 udhcpd_main 1482 1472 -10 udhcpc_main 2762 2752 -10 tune2fs_main 290 280 -10 tunctl_main 366 356 -10 truncate_main 218 208 -10 tr_main 518 508 -10 time_main 1134 1124 -10 tftp_main 286 276 -10 telnetd_main 1873 1863 -10 tcpudpsvd_main 1785 1775 -10 taskset_main 521 511 -10 tar_main 1009 999 -10 tail_main 1644 1634 -10 syslogd_main 1967 1957 -10 switch_root_main 368 358 -10 svlogd_main 1454 1444 -10 sv 1296 1286 -10 stat_main 104 94 -10 start_stop_daemon_main 1028 1018 -10 split_main 542 532 -10 sort_main 796 786 -10 slattach_main 624 614 -10 shuf_main 504 494 -10 setsid_main 96 86 -10 setserial_main 1132 1122 -10 setfont_main 388 378 -10 setconsole_main 78 68 -10 sendmail_main 1209 1199 -10 sed_main 677 667 -10 script_main 1077 1067 -10 run_parts_main 325 315 -10 rtcwake_main 454 444 -10 rm_main 175 165 -10 reformime_main 119 109 -10 readlink_main 123 113 -10 rdate_main 246 236 -10 pwdx_main 189 179 -10 pstree_main 317 307 -10 pscan_main 663 653 -10 popmaildir_main 818 808 -10 pmap_main 80 70 -10 nc_main 1042 1032 -10 mv_main 558 548 -10 mountpoint_main 477 467 -10 mount_main 1264 1254 -10 modprobe_main 768 758 -10 modinfo_main 333 323 -10 mktemp_main 200 190 -10 mkswap_main 324 314 -10 mkfs_vfat_main 1489 1479 -10 microcom_main 715 705 -10 md5_sha1_sum_main 521 511 -10 man_main 867 857 -10 makedevs_main 1052 1042 -10 ls_main 563 553 -10 losetup_main 432 422 -10 loadfont_main 89 79 -10 ln_main 524 514 -10 link_main 75 65 -10 ipcalc_main 544 534 -10 iostat_main 2397 2387 -10 install_main 768 758 -10 id_main 480 470 -10 i2cset_main 1239 1229 -10 i2cget_main 380 370 -10 i2cdump_main 1482 1472 -10 i2cdetect_main 682 672 -10 hwclock_main 406 396 -10 httpd_main 741 731 -10 grep_main 837 827 -10 getty_main 1559 1549 -10 fuser_main 297 287 -10 ftpgetput_main 345 335 -10 ftpd_main 2232 2222 -10 fstrim_main 251 241 -10 fsfreeze_main 77 67 -10 fsck_minix_main 2921 2911 -10 flock_main 314 304 -10 flashcp_main 740 730 -10 flash_eraseall_main 833 823 -10 fdformat_main 532 522 -10 expand_main 680 670 -10 eject_main 335 325 -10 dumpleases_main 630 620 -10 du_main 314 304 -10 dos2unix_main 441 431 -10 diff_main 1350 1340 -10 df_main 1064 1054 -10 date_main 1095 1085 -10 cut_main 961 951 -10 cryptpw_main 228 218 -10 crontab_main 575 565 -10 crond_main 1149 1139 -10 cp_main 370 360 -10 common_traceroute_main 3834 3824 -10 common_ping_main 1767 1757 -10 comm_main 239 229 -10 cmp_main 655 645 -10 chrt_main 379 369 -10 chpst_main 704 694 -10 chpasswd_main 308 298 -10 chown_main 171 161 -10 chmod_main 158 148 -10 cat_main 428 418 -10 bzip2_main 120 110 -10 blkdiscard_main 264 254 -10 base64_main 221 211 -10 arping_main 1665 1655 -10 ar_main 556 546 -10 adjtimex_main 406 396 -10 adduser_main 882 872 -10 addgroup_main 411 401 -10 acpid_main 1198 1188 -10 optstring 11 - -11 opt_string 18 - -18 OPT_STR 25 - -25 ubi_tools_main 1288 1258 -30 ls_options 31 - -31 ------------------------------------------------------------------------------ (add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes text data bss dec hex filename 915428 485 6876 922789 e14a5 busybox_old 914629 485 6872 921986 e1182 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08getopt32: remove applet_long_optionsDenys Vlasenko
FEATURE_GETOPT_LONG made dependent on LONG_OPTS. The folloving options are removed, now LONG_OPTS enables long options for affected applets: FEATURE_ENV_LONG_OPTIONS FEATURE_EXPAND_LONG_OPTIONS FEATURE_UNEXPAND_LONG_OPTIONS FEATURE_MKDIR_LONG_OPTIONS FEATURE_MV_LONG_OPTIONS FEATURE_RMDIR_LONG_OPTIONS FEATURE_ADDGROUP_LONG_OPTIONS FEATURE_ADDUSER_LONG_OPTIONS FEATURE_HWCLOCK_LONG_OPTIONS FEATURE_NSENTER_LONG_OPTS FEATURE_CHCON_LONG_OPTIONS FEATURE_RUNCON_LONG_OPTIONS They either had a small number of long options, or their long options are essential. Example: upstream addgroup and adduser have ONLY longopts, we should probably go further and get rid of non-standard short options. To this end, make addgroup and adduser "select LONG_OPTS". We had this breakage caused by us even in our own package! #if ENABLE_LONG_OPTS || !ENABLE_ADDGROUP /* We try to use --gid, not -g, because "standard" addgroup * has no short option -g, it has only long --gid. */ argv[1] = (char*)"--gid"; #else /* Breaks if system in fact does NOT use busybox addgroup */ argv[1] = (char*)"-g"; #endif xargs: its lone longopt no longer depends on DESKTOP, only on LONG_OPTS. hwclock TODO: get rid of incompatible -t, -l aliases to --systz, --localtime Shorten help texts by omitting long option when short opt alternative exists. Reduction of size comes from the fact that store of an immediate (an address of longopts) to a fixed address (global variable) is a longer insn than pushing that immediate or passing it in a register. This effect is CPU-agnostic. function old new delta getopt32 1350 22 -1328 vgetopt32 - 1318 +1318 getopt32long - 24 +24 tftpd_main 562 567 +5 scan_recursive 376 380 +4 collect_cpu 545 546 +1 date_main 1096 1095 -1 hostname_main 262 259 -3 uname_main 259 255 -4 setpriv_main 362 358 -4 rmdir_main 191 187 -4 mv_main 562 558 -4 ipcalc_main 548 544 -4 ifenslave_main 641 637 -4 gzip_main 192 188 -4 gunzip_main 77 73 -4 fsfreeze_main 81 77 -4 flock_main 318 314 -4 deluser_main 337 333 -4 cp_main 374 370 -4 chown_main 175 171 -4 applet_long_options 4 - -4 xargs_main 894 889 -5 wget_main 2540 2535 -5 udhcpc_main 2767 2762 -5 touch_main 436 431 -5 tar_main 1014 1009 -5 start_stop_daemon_main 1033 1028 -5 sed_main 682 677 -5 script_main 1082 1077 -5 run_parts_main 330 325 -5 rtcwake_main 459 454 -5 od_main 2169 2164 -5 nl_main 201 196 -5 modprobe_main 773 768 -5 mkdir_main 160 155 -5 ls_main 568 563 -5 install_main 773 768 -5 hwclock_main 411 406 -5 getopt_main 622 617 -5 fstrim_main 256 251 -5 env_main 198 193 -5 dumpleases_main 635 630 -5 dpkg_main 3991 3986 -5 diff_main 1355 1350 -5 cryptpw_main 233 228 -5 cpio_main 593 588 -5 conspy_main 1135 1130 -5 chpasswd_main 313 308 -5 adduser_main 887 882 -5 addgroup_main 416 411 -5 ftpgetput_main 351 345 -6 get_terminal_width_height 242 234 -8 expand_main 690 680 -10 static.expand_longopts 18 - -18 static.unexpand_longopts 27 - -27 mkdir_longopts 28 - -28 env_longopts 30 - -30 static.ifenslave_longopts 34 - -34 mv_longopts 46 - -46 static.rmdir_longopts 48 - -48 packed_usage 31739 31687 -52 ------------------------------------------------------------------------------ (add/remove: 2/8 grow/shrink: 3/49 up/down: 1352/-1840) Total: -488 bytes text data bss dec hex filename 915681 485 6880 923046 e15a6 busybox_old 915428 485 6876 922789 e14a5 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-27config: trim/improve item names and help texts, take 2Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-15 20:27:46 +0000