aboutsummaryrefslogtreecommitdiff
path: root/networking/udhcp/dhcpc.c
AgeCommit message (Collapse)Author
2018-03-10udhcpd: fix "not dying on SIGTERM"Denys Vlasenko
Fixes: commit 52a515d18724bbb34e3ccbbb0218efcc4eccc0a8 "udhcp: use poll() instead of select()" Feb 16 2017 udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read. In the above commit, it was changed as follows: - if (!FD_ISSET(signal_pipe.rd, rfds)) + if (!pfds[0].revents) return 0; The problem is, the check was working for select() purely by accident. Caught signal interrupts select()/poll() syscalls, they return with EINTR (regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked. IOW: they can't see any changes to fd state caused by signal haldler (in our case, signal handler makes signal pipe ready to be read). For select(), it means that rfds[] bit array is unmodified, bit of signal pipe's read fd is still set, and the above check "works": it thinks select() says there is data to read. This accident does not work for poll(): .revents stays clear, and we do not try reading signal pipe as we should. In udhcpd, we fall through and block in socket read. Further SIGTERM signals simply cause socket read to be interrupted and then restarted (since SIGTERM handler has SA_RESTART=1). Fixing this as follows: remove the check altogether. Set signal pipe read fd to nonblocking mode. Always read it in udhcp_sp_read(). If read fails, assume it's EAGAIN and return 0 ("no signal seen"). udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR (using safe_poll()) - thus ensuring we have correct .revents for all fds - and calling udhcp_sp_read() only if pfds[0].revents!=0. udhcpc performs much fewer reads (typically it sleeps >99.999% of the time), there is no need to optimize it: can call udhcp_sp_read() after each poll unconditionally. To robustify socket reads, unconditionally set pfds[1].revents=0 in udhcp_sp_fd_set() (which is before poll), and check it before reading network socket in udhcpd. TODO: This might still fail: if pfds[1].revents=POLLIN, socket read may still block. There are rare cases when select/poll indicates that data can be read, but then actual read still blocks (one such case is UDP packets with wrong checksum). General advise is, if you use a poll/select loop, keep all your fds nonblocking. Maybe we should also do that to our network sockets? function old new delta udhcp_sp_setup 55 65 +10 udhcp_sp_fd_set 54 60 +6 udhcp_sp_read 46 36 -10 udhcpd_main 1451 1437 -14 udhcpc_main 2723 2708 -15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-02-07udhcp: do not setlinebuf(stdout), we don't print to stdout anymoreDenys Vlasenko
Since bb_info_msg() was eliminated type of buffering on stdout is not important function old new delta udhcpd_main 1463 1451 -12 udhcpc_main 2735 2723 -12 setlinebuf 19 - -19 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 0/2 up/down: 0/-43) Total: -43 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2018-01-17udhcpc[6]: remove overzealous timeout clamping codeDenys Vlasenko
function old new delta udhcpc_main 2840 2826 -14 udhcpc6_main 2699 2670 -29 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-10-05whitespace and comment format fixes, no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29use %m printf specifier where appropriateDenys Vlasenko
function old new delta out 85 75 -10 udhcpd_main 1472 1461 -11 open_stdio_to_tty 98 85 -13 init_exec 245 232 -13 udhcpc_main 2763 2749 -14 do_cmd 4771 4755 -16 status_line_bold_errno 32 14 -18 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-95) Total: -95 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc[6]: make log2 messages for chaddr field indented like the restDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc: paranoia when using kernel UDP mode for sending renew: server ID may ↵Denys Vlasenko
be bogus With new code, we request that target IP (server ID) must be directly reachable. If it's not, this happens: udhcpc: waiting 2000 seconds udhcpc: entering listen mode: kernel udhcpc: opening listen socket on *:68 wlan0 udhcpc: entering renew state udhcpc: sending renew to 1.1.1.1 udhcpc: send: Network is unreachable ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy! udhcpc: entering rebinding state udhcpc: entering listen mode: raw udhcpc: created raw socket udhcpc: sending renew to 0.0.0.0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed over eth0 (!) and maybe even into Internet (!!!). function old new delta udhcpc_main 2752 2763 +11 udhcp_send_kernel_packet 295 301 +6 send_renew 82 84 +2 send_packet 166 168 +2 bcast_or_ucast 23 25 +2 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-09-29udhcpc[6]: initialize entire sockaddr_llDenys Vlasenko
I see random field values like sll_hatype=0x267 when I strace. They seem to not matter, but just in case they sometimes do, let's at least have deterministic values (via memset(0)). function old new delta change_listen_mode 308 322 +14 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-29udhcpc: show only short opts in --help textDenys Vlasenko
function old new delta packed_usage 31615 31501 -114 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08getopt32: remove opt_complementaryDenys Vlasenko
function old new delta vgetopt32 1318 1392 +74 runsvdir_main 703 713 +10 bb_make_directory 423 425 +2 collect_cpu 546 545 -1 opt_chars 3 - -3 opt_complementary 4 - -4 tftpd_main 567 562 -5 ntp_init 476 471 -5 zcip_main 1266 1256 -10 xxd_main 428 418 -10 whois_main 140 130 -10 who_main 463 453 -10 which_main 212 202 -10 wget_main 2535 2525 -10 watchdog_main 291 281 -10 watch_main 222 212 -10 vlock_main 399 389 -10 uuencode_main 332 322 -10 uudecode_main 316 306 -10 unlink_main 45 35 -10 udhcpd_main 1482 1472 -10 udhcpc_main 2762 2752 -10 tune2fs_main 290 280 -10 tunctl_main 366 356 -10 truncate_main 218 208 -10 tr_main 518 508 -10 time_main 1134 1124 -10 tftp_main 286 276 -10 telnetd_main 1873 1863 -10 tcpudpsvd_main 1785 1775 -10 taskset_main 521 511 -10 tar_main 1009 999 -10 tail_main 1644 1634 -10 syslogd_main 1967 1957 -10 switch_root_main 368 358 -10 svlogd_main 1454 1444 -10 sv 1296 1286 -10 stat_main 104 94 -10 start_stop_daemon_main 1028 1018 -10 split_main 542 532 -10 sort_main 796 786 -10 slattach_main 624 614 -10 shuf_main 504 494 -10 setsid_main 96 86 -10 setserial_main 1132 1122 -10 setfont_main 388 378 -10 setconsole_main 78 68 -10 sendmail_main 1209 1199 -10 sed_main 677 667 -10 script_main 1077 1067 -10 run_parts_main 325 315 -10 rtcwake_main 454 444 -10 rm_main 175 165 -10 reformime_main 119 109 -10 readlink_main 123 113 -10 rdate_main 246 236 -10 pwdx_main 189 179 -10 pstree_main 317 307 -10 pscan_main 663 653 -10 popmaildir_main 818 808 -10 pmap_main 80 70 -10 nc_main 1042 1032 -10 mv_main 558 548 -10 mountpoint_main 477 467 -10 mount_main 1264 1254 -10 modprobe_main 768 758 -10 modinfo_main 333 323 -10 mktemp_main 200 190 -10 mkswap_main 324 314 -10 mkfs_vfat_main 1489 1479 -10 microcom_main 715 705 -10 md5_sha1_sum_main 521 511 -10 man_main 867 857 -10 makedevs_main 1052 1042 -10 ls_main 563 553 -10 losetup_main 432 422 -10 loadfont_main 89 79 -10 ln_main 524 514 -10 link_main 75 65 -10 ipcalc_main 544 534 -10 iostat_main 2397 2387 -10 install_main 768 758 -10 id_main 480 470 -10 i2cset_main 1239 1229 -10 i2cget_main 380 370 -10 i2cdump_main 1482 1472 -10 i2cdetect_main 682 672 -10 hwclock_main 406 396 -10 httpd_main 741 731 -10 grep_main 837 827 -10 getty_main 1559 1549 -10 fuser_main 297 287 -10 ftpgetput_main 345 335 -10 ftpd_main 2232 2222 -10 fstrim_main 251 241 -10 fsfreeze_main 77 67 -10 fsck_minix_main 2921 2911 -10 flock_main 314 304 -10 flashcp_main 740 730 -10 flash_eraseall_main 833 823 -10 fdformat_main 532 522 -10 expand_main 680 670 -10 eject_main 335 325 -10 dumpleases_main 630 620 -10 du_main 314 304 -10 dos2unix_main 441 431 -10 diff_main 1350 1340 -10 df_main 1064 1054 -10 date_main 1095 1085 -10 cut_main 961 951 -10 cryptpw_main 228 218 -10 crontab_main 575 565 -10 crond_main 1149 1139 -10 cp_main 370 360 -10 common_traceroute_main 3834 3824 -10 common_ping_main 1767 1757 -10 comm_main 239 229 -10 cmp_main 655 645 -10 chrt_main 379 369 -10 chpst_main 704 694 -10 chpasswd_main 308 298 -10 chown_main 171 161 -10 chmod_main 158 148 -10 cat_main 428 418 -10 bzip2_main 120 110 -10 blkdiscard_main 264 254 -10 base64_main 221 211 -10 arping_main 1665 1655 -10 ar_main 556 546 -10 adjtimex_main 406 396 -10 adduser_main 882 872 -10 addgroup_main 411 401 -10 acpid_main 1198 1188 -10 optstring 11 - -11 opt_string 18 - -18 OPT_STR 25 - -25 ubi_tools_main 1288 1258 -30 ls_options 31 - -31 ------------------------------------------------------------------------------ (add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes text data bss dec hex filename 915428 485 6876 922789 e14a5 busybox_old 914629 485 6872 921986 e1182 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-08-08getopt32: remove applet_long_optionsDenys Vlasenko
FEATURE_GETOPT_LONG made dependent on LONG_OPTS. The folloving options are removed, now LONG_OPTS enables long options for affected applets: FEATURE_ENV_LONG_OPTIONS FEATURE_EXPAND_LONG_OPTIONS FEATURE_UNEXPAND_LONG_OPTIONS FEATURE_MKDIR_LONG_OPTIONS FEATURE_MV_LONG_OPTIONS FEATURE_RMDIR_LONG_OPTIONS FEATURE_ADDGROUP_LONG_OPTIONS FEATURE_ADDUSER_LONG_OPTIONS FEATURE_HWCLOCK_LONG_OPTIONS FEATURE_NSENTER_LONG_OPTS FEATURE_CHCON_LONG_OPTIONS FEATURE_RUNCON_LONG_OPTIONS They either had a small number of long options, or their long options are essential. Example: upstream addgroup and adduser have ONLY longopts, we should probably go further and get rid of non-standard short options. To this end, make addgroup and adduser "select LONG_OPTS". We had this breakage caused by us even in our own package! #if ENABLE_LONG_OPTS || !ENABLE_ADDGROUP /* We try to use --gid, not -g, because "standard" addgroup * has no short option -g, it has only long --gid. */ argv[1] = (char*)"--gid"; #else /* Breaks if system in fact does NOT use busybox addgroup */ argv[1] = (char*)"-g"; #endif xargs: its lone longopt no longer depends on DESKTOP, only on LONG_OPTS. hwclock TODO: get rid of incompatible -t, -l aliases to --systz, --localtime Shorten help texts by omitting long option when short opt alternative exists. Reduction of size comes from the fact that store of an immediate (an address of longopts) to a fixed address (global variable) is a longer insn than pushing that immediate or passing it in a register. This effect is CPU-agnostic. function old new delta getopt32 1350 22 -1328 vgetopt32 - 1318 +1318 getopt32long - 24 +24 tftpd_main 562 567 +5 scan_recursive 376 380 +4 collect_cpu 545 546 +1 date_main 1096 1095 -1 hostname_main 262 259 -3 uname_main 259 255 -4 setpriv_main 362 358 -4 rmdir_main 191 187 -4 mv_main 562 558 -4 ipcalc_main 548 544 -4 ifenslave_main 641 637 -4 gzip_main 192 188 -4 gunzip_main 77 73 -4 fsfreeze_main 81 77 -4 flock_main 318 314 -4 deluser_main 337 333 -4 cp_main 374 370 -4 chown_main 175 171 -4 applet_long_options 4 - -4 xargs_main 894 889 -5 wget_main 2540 2535 -5 udhcpc_main 2767 2762 -5 touch_main 436 431 -5 tar_main 1014 1009 -5 start_stop_daemon_main 1033 1028 -5 sed_main 682 677 -5 script_main 1082 1077 -5 run_parts_main 330 325 -5 rtcwake_main 459 454 -5 od_main 2169 2164 -5 nl_main 201 196 -5 modprobe_main 773 768 -5 mkdir_main 160 155 -5 ls_main 568 563 -5 install_main 773 768 -5 hwclock_main 411 406 -5 getopt_main 622 617 -5 fstrim_main 256 251 -5 env_main 198 193 -5 dumpleases_main 635 630 -5 dpkg_main 3991 3986 -5 diff_main 1355 1350 -5 cryptpw_main 233 228 -5 cpio_main 593 588 -5 conspy_main 1135 1130 -5 chpasswd_main 313 308 -5 adduser_main 887 882 -5 addgroup_main 416 411 -5 ftpgetput_main 351 345 -6 get_terminal_width_height 242 234 -8 expand_main 690 680 -10 static.expand_longopts 18 - -18 static.unexpand_longopts 27 - -27 mkdir_longopts 28 - -28 env_longopts 30 - -30 static.ifenslave_longopts 34 - -34 mv_longopts 46 - -46 static.rmdir_longopts 48 - -48 packed_usage 31739 31687 -52 ------------------------------------------------------------------------------ (add/remove: 2/8 grow/shrink: 3/49 up/down: 1352/-1840) Total: -488 bytes text data bss dec hex filename 915681 485 6880 923046 e15a6 busybox_old 915428 485 6876 922789 e14a5 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-24udhcpc[6]: fix messages referring to select() while we use poll()Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-07-21udhcpc[6]: on log level 1, three messages about raw socket is overkillDenys Vlasenko
Move first two messages to log2 level: 08:46:32.23824 udhcpc: opening raw socket on ifindex 2 08:46:32.23825 udhcpc: got raw socket fd 08:46:32.26354 udhcpc: created raw socket Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-06-28udhcpc6: make -O OPT workDenys Vlasenko
Patch is based on work by tiggerswelt.net. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-05-08udhcpc: do not accept --background on NOMMU (same as -b)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-05-08udhcpc: fix "udhcpc -x hostname:<name> not working on nommu"Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-04-17Spelling fixes in comments, documentation, tests and examplesDenys Vlasenko
By klemens <ka7@github.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-17udhcpc: make sure we do not overflow poll timeoutDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-02-16udhcp: use poll() instead of select()Denys Vlasenko
function old new delta udhcp_sp_read 65 46 -19 udhcp_sp_fd_set 79 54 -25 udhcpd_main 1530 1482 -48 udhcpc_main 2780 2730 -50 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-142) Total: -142 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-11-23Convert all udhcp applets to "new style" applet definitionsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25udhcpc: check read of option length byte to be within packetBrian Foley
function old new delta udhcp_get_option 215 220 +5 udhcp_run_script 802 803 +1 Signed-off-by: Brian Foley <bpfoley@google.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-26udhcpc: Unconditionally call deconfig script, not only if lease is activePeter Korsgaard
The udhcpc script may be used to setup fallback configuration (E.G. IPv4LL, fixed IP address, ..) that also needs to be cleaned up on release (E.G. when SIGUSR2 is called or on shutdown with -R), so unconditionally call deconfig. Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-06getopt32: add new syntax of 'o:+' and 'o:*' for -o NUM and -o LISTDenys Vlasenko
In many cases, this aqllows to drop use of opt_complementary. Approximately -400 bytes: function old new delta getopt32 1423 1502 +79 opt_string 17 18 +1 OPT_STR 24 25 +1 uniq_main 416 406 -10 timeout_main 279 269 -10 sulogin_main 270 260 -10 readprofile_main 1825 1815 -10 ps_main 543 533 -10 pidof_main 245 235 -10 pgrep_main 611 601 -10 od_main 2600 2590 -10 mkfs_minix_main 2684 2674 -10 mkfs_ext2_main 2603 2593 -10 microcom_main 712 702 -10 makemime_main 315 305 -10 ionice_main 282 272 -10 inetd_main 2074 2064 -10 ifplugd_main 1144 1134 -10 halt_main 353 343 -10 getopt_main 636 626 -10 fdisk_main 2854 2844 -10 env_main 206 196 -10 dmesg_main 319 309 -10 conspy_main 1214 1204 -10 awk_main 981 971 -10 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/22 up/down: 81/-220) Total: -139 bytes text data bss dec hex filename 919373 906 14060 934339 e41c3 busybox_old 918969 906 14060 933935 e402f busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-03udhcpc: run "deconfig" script in manual renew state too. closes 9061Denys Vlasenko
The bug was seen when the following is done: # killall 1 udhpc; killall 2 udhpc Performing a DHCP renew state: 2 -> 5 Sending renew... Entering released state state: 5 -> 6 <<<<<<<<<<<<<< not calling script!!!! Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-22*: slap on a few ALIGN1/2s where appropriateDenys Vlasenko
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map" text data bss dec hex filename 829901 4086 1904 835891 cc133 busybox_before 829665 4086 1904 835655 cc047 busybox Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-04-21udhcp: add setup_common_bufsiz() as neededDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-30udhcp: get rid of bb_info_msg()Denys Vlasenko
function old new delta udhcpd_main 1501 1531 +30 d6_recv_raw_packet 251 264 +13 perform_d6_release 188 198 +10 udhcpc6_main 2443 2449 +6 udhcp_recv_raw_packet 582 588 +6 udhcp_recv_kernel_packet 132 138 +6 send_d6_renew 140 146 +6 d6_recv_kernel_packet 118 124 +6 send_renew 77 82 +5 send_discover 85 90 +5 send_decline 84 89 +5 send_d6_select 97 102 +5 send_d6_discover 174 179 +5 perform_release 167 172 +5 count_lines 72 74 +2 udhcpc_main 2836 2837 +1 bb_info_msg 125 - -125 ------------------------------------------------------------------------------ (add/remove: 0/2 grow/shrink: 17/4 up/down: 117/-180) Total: -63 bytes text data bss dec hex filename 924935 906 17160 943001 e6399 busybox_old 924736 906 17160 942802 e62d2 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-04udhcpc: do not use -t NUM for counting "select" packets, use 3Denys Vlasenko
Otherwise, "-t 0" usage may end up sending them forever if server does not respond. function old new delta udhcpc_main 2846 2836 -10 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-03dhcpc: Use client IP address as source address for DHCP renew/rebind messagesHans Dedecker
RFC2131 paragraph 4.1 states DHCP messages broadcast by a client prior to that client obtaining its IP address must have the source IP address field in the header set to 0. Request messages transmitted in renewing and rebinding state need to use the obtained IP address as source IP address in the header; this behavior lines up with other implementations like ISC dhcp client. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-26udhcpc: fix OPTION_6RD parsing (could overflow its malloced buffer)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-11networking: allow dot at the end of the domain name in dhcp responseDenys Vlasenko
Patch based on Balaji Punnuru <balaji.punnuru@gmail.com> work. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-10-08udhcpc: fix for some Android toolchain breakageDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-08-24libbb: add setsockopt_foo helpersDenys Vlasenko
function old new delta setsockopt_int - 23 +23 do_load 918 934 +16 setsockopt_SOL_SOCKET_int - 14 +14 setsockopt_keepalive - 10 +10 setsockopt_SOL_SOCKET_1 - 10 +10 buffer_fill_and_print 169 178 +9 setsockopt_1 - 8 +8 nfsmount 3560 3566 +6 redirect 1277 1282 +5 tcpudpsvd_main 1782 1786 +4 d6_send_kernel_packet 272 275 +3 i2cget_main 380 382 +2 ed_main 2544 2545 +1 scan_recursive 380 378 -2 nbdclient_main 492 490 -2 hash_find 235 233 -2 cmdputs 334 332 -2 parse_command 1443 1440 -3 static.two 4 - -4 ntpd_main 1039 1035 -4 const_int_1 4 - -4 const_IPTOS_LOWDELAY 4 - -4 RCVBUF 4 - -4 ntp_init 474 469 -5 change_listen_mode 316 310 -6 uevent_main 416 409 -7 arping_main 1697 1690 -7 telnet_main 1612 1603 -9 socket_want_pktinfo 42 33 -9 setsockopt_reuseaddr 21 10 -11 setsockopt_broadcast 21 10 -11 httpd_main 772 757 -15 get_remote_transfer_fd 109 94 -15 make_new_session 503 487 -16 ftpd_main 2177 2160 -17 read_bunzip 1896 1866 -30 common_traceroute_main 4099 4058 -41 common_ping_main 1836 1783 -53 ------------------------------------------------------------------------------ (add/remove: 5/4 grow/shrink: 8/21 up/down: 111/-283) Total: -172 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-30udhcpc: dns labels can actually start with a numberArthur Gautier
While RFC1035 recommends a label not to start with a number, there is actually no such limitation in dns. One may buy a domain name like 0x1.net and use it. This commit remove this check and allow a user to use such domains. Signed-off-by: Arthur Gautier <baloo@gandi.net> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-12-25udhcpd: account for script delay in leaseJohn Schroeder
Prevent nasty surprises if script runs longer than lease time / 2. Signed-off-by: John Schroeder <jschroed@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-12-21udhcpc: account for script run timeDenys Vlasenko
Based on the following user report: I ran into an issue where I was seeing a long delay in the scripts called in udhcp_run_script. I was using an old version of OpenWrt (kamikaze) and a satellite modem. An NTP script was being called and the modem would sometimes take a long time to respond to the DNS lookup when it was offline. This delay started affecting my lease time. The lease that I would get from my satellite modem before it was online would be short: only 60 seconds. The delay with NTP and the modem would typically be about 18 seconds. This would cause the first DHCP renew request from dhcpc to be a little late. Under certain circumstances, I could even see the first DHCP renew to occur after the lease had expired! function old new delta udhcpc_main 2816 2837 +21 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-30udhcpd: add option for tweaking arppingMichel Stam
Some clients have a very short timeout for sending the DHCP DISCOVER, shorter than the arpping timeout of 2000 milliseconds that udhcpd uses by default. This patch allows tweaking the timeout, or disabling of arpping altogether, at the risk of handing out addresses which are already in use. function old new delta udhcpd_main 1460 1501 +41 udhcpc_main 2814 2851 +37 packed_usage 29957 29974 +17 arpping 477 493 +16 find_free_or_expired_nip 161 174 +13 send_offer 285 292 +7 nobody_responds_to_arp 85 89 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0) Total: 135 bytes Signed-off-by: Michel Stam <m.stam@fugro.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-06-16udhcpc: make hostname sanitization optional. Closes 3979Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-27udhcpc: ignore NAKs from "wrong" servers. Closes 4267Denys Vlasenko
function old new delta udhcpc_main 2716 2814 +98 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-19udhcpc: fix BPF filter. Hopefully fixes the root cause of 4598 and 6746Denys Vlasenko
Use a *signed* large positive value in BPF filter to indicate success. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-07udhcpc: in comments, explain the kind of raw socket we createDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-03udhcpc: don't use BPF filter, users report problems (bugs 4598, 6746)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-11-03udhcpc: allow zero server-id. Closes 6614.Denys Vlasenko
function old new delta bcast_or_ucast - 47 +47 udhcp_send_kernel_packet 271 295 +24 udhcpc_main 2696 2705 +9 udhcp_send_raw_packet 456 459 +3 send_release 90 76 -14 send_renew 105 77 -28 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 3/2 up/down: 83/-42) Total: 41 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-08-08udhcpc: tweak help text moreDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-08-08udhcpc: tweak help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-08-05udhcpc: tweak help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-01-14whitespace cleanup. no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-09-27udhcpc[6]: allow discover_retries == 0 (infinite)Felix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-09-17ushcpc: gracefully handle packets with CHECKSUM_PARTIALAlexey Froloff
function old new delta udhcp_recv_raw_packet 415 579 +164 change_listen_mode 317 370 +53 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 217/0) Total: 217 bytes Signed-off-by: Alexey Froloff <raorn@raorn.name> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-07-27udhcpc: make -O <numeric_opt> work. Closes 5402Denys Vlasenko
function old new delta udhcpc_main 2642 2685 +43 udhcp_recv_raw_packet 414 415 +1 d6_recv_raw_packet 248 249 +1 udhcpc6_main 2430 2413 -17 add_client_options 239 213 -26 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/2 up/down: 45/-43) Total: 2 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>