Age | Commit message (Collapse) | Author |
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.
This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.
The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)
function old new delta
bb_info_msg - 182 +182
bb_vinfo_msg - 27 +27
static.log7 194 198 +4
log8 190 191 +1
log5 190 191 +1
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes
If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:
function old new delta
static.log7 194 200 +6
log8 190 193 +3
log5 190 193 +3
syslog_level 1 - -1
bb_verror_msg 583 581 -2
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This reverts "udhcpc: paranoia when using kernel UDP mode
for sending renew: server ID may be bogus".
Users complain that they do have servers behind routers
(with DHCP relays).
function old new delta
send_packet 168 166 -2
bcast_or_ucast 25 23 -2
udhcp_send_kernel_packet 301 295 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10) Total: -10 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
be bogus
With new code, we request that target IP (server ID) must be directly reachable.
If it's not, this happens:
udhcpc: waiting 2000 seconds
udhcpc: entering listen mode: kernel
udhcpc: opening listen socket on *:68 wlan0
udhcpc: entering renew state
udhcpc: sending renew to 1.1.1.1
udhcpc: send: Network is unreachable
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1.1.1.1 needs routing, this is fishy!
udhcpc: entering rebinding state
udhcpc: entering listen mode: raw
udhcpc: created raw socket
udhcpc: sending renew to 0.0.0.0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ going to use broadcast
which is the desired behavior. Before the patch, packet to 1.1.1.1 was routed
over eth0 (!) and maybe even into Internet (!!!).
function old new delta
udhcpc_main 2752 2763 +11
udhcp_send_kernel_packet 295 301 +6
send_renew 82 84 +2
send_packet 166 168 +2
bcast_or_ucast 23 25 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
I see random field values like sll_hatype=0x267 when I strace.
They seem to not matter, but just in case they sometimes do,
let's at least have deterministic values (via memset(0)).
function old new delta
change_listen_mode 308 322 +14
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcpd_main 1501 1531 +30
d6_recv_raw_packet 251 264 +13
perform_d6_release 188 198 +10
udhcpc6_main 2443 2449 +6
udhcp_recv_raw_packet 582 588 +6
udhcp_recv_kernel_packet 132 138 +6
send_d6_renew 140 146 +6
d6_recv_kernel_packet 118 124 +6
send_renew 77 82 +5
send_discover 85 90 +5
send_decline 84 89 +5
send_d6_select 97 102 +5
send_d6_discover 174 179 +5
perform_release 167 172 +5
count_lines 72 74 +2
udhcpc_main 2836 2837 +1
bb_info_msg 125 - -125
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 17/4 up/down: 117/-180) Total: -63 bytes
text data bss dec hex filename
924935 906 17160 943001 e6399 busybox_old
924736 906 17160 942802 e62d2 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Commit b8b72f02 removed all padding from DHCP packets
to fix operation with buggy servers which can't handle
maximum sized packets. But it introduced a regression
with buggy routers which drop DHCP packets smaller
than 300 bytes (i.e. 342 byte ethernet packets).
Add back some padding to work around.
function old new delta
udhcp_send_kernel_packet 268 292 +24
udhcp_send_raw_packet 462 473 +11
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 35/0) Total: 35 bytes
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
string)
Stats for last three commits:
function old new delta
udhcpc_main 2635 2646 +11
udhcp_recv_raw_packet 425 414 -11
udhcp_recv_kernel_packet 210 134 -76
packed_usage 28940 28857 -83
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 11/-170) Total: -159 bytes
text data bss dec hex filename
879524 493 7584 887601 d8b31 busybox_old
879340 493 7584 887417 d8a79 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Dan Fandrich <dan@coneharvesters.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
|
|
This change retains "or later" state! No licensing _changes_ here,
only form is adjusted (article, space between "GPL" and "v2" and so on).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_send_raw_packet 411 456 +45
udhcp_send_kernel_packet 259 271 +12
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_run_script 654 617 -37
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
dumpleases_main 632 623 -9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This is needed for "overflow option" support
function old new delta
udhcp_find_option - 34 +34
udhcp_add_binary_option 94 106 +12
write_leases 227 223 -4
udhcp_init_header 86 82 -4
send_release 104 99 -5
init_packet 87 81 -6
add_client_options 160 154 -6
add_server_options 100 92 -8
udhcpd_main 1964 1954 -10
udhcpc_main 2859 2837 -22
find_option 34 - -34
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 1/8 up/down: 46/-99) Total: -53 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
also gets rid of ether-aton's static buffer in ether-wake:
text data bss dec hexfilename
838664 441 7572 846677 ceb55busybox_old
838650 441 7564 846655 ceb3fbusybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Also fixes attacks possible via DHCPDECLINE / DHCPRELEASE
function old new delta
udhcpd_main 1846 1949 +103
send_renew 105 142 +37
send_NAK 61 - -61
send_ACK 180 - -180
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 2/0 up/down: 140/-241) Total: -101 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
|
|
function old new delta
send_packet 103 87 -16
udhcpc_main 2359 2323 -36
|
|
|
|
|
|
pause on "serious failure to receive".
Some misc fixes are also folded in here.
|
|
for DHCPDECLINE. Fixing, and making code smaller.
|
|
udhcpc: make UDP packet sending the same as raw sending in regards
to error messages. Minor code size shrink. Total size grows due
to added messages:
text data bss dec hex filename
770312 683 7244 778239 bdfff busybox_old
770327 683 7244 778254 be00e busybox_unstripped
|
|
but lets add comments how to do it if needed.
|
|
servers" options);
slight optimizations and function renaming
udhcp_send_raw_packet - 391 +391
udhcp_send_kernel_packet - 197 +197
udhcp_recv_packet - 134 +134
get_raw_packet 353 326 -27
udhcp_get_packet 134 - -134
udhcp_kernel_packet 197 - -197
udhcp_raw_packet 391 - -391
------------------------------------------------------------------------------
(add/remove: 3/3 grow/shrink: 0/1 up/down: 722/-749) Total: -27 bytes
|
|
function old new delta
udhcp_get_packet 146 134 -12
get_raw_packet 368 353 -15
|
|
stop checking whether setsockopt_reuseaddr(int fd) was successful (it always is)
remove second parameter (sockllen) from xmalloc_sockaddr2xxxxx functions
sockaddr2str 142 156 +14
collect_blk 467 474 +7
xdup2 28 33 +5
singlemount 4456 4454 -2
print_host 214 212 -2
nslookup_main 139 137 -2
ftpgetput_main 414 412 -2
udhcpd_main 1258 1255 -3
udhcpc_main 2405 2402 -3
traceroute_main 4125 4122 -3
nc_main 1072 1069 -3
buffer_fill_and_print 76 73 -3
xmalloc_sockaddr2hostonly_noport 18 14 -4
xmalloc_sockaddr2host_noport 18 14 -4
xmalloc_sockaddr2host 15 11 -4
xmalloc_sockaddr2dotted_noport 18 14 -4
xmalloc_sockaddr2dotted 18 14 -4
wget_main 2618 2614 -4
ping_main 393 389 -4
ip_port_str 120 115 -5
dhcprelay_main 1146 1141 -5
dnsd_main 1531 1525 -6
passwd_main 1110 1102 -8
udhcp_kernel_packet 206 197 -9
udhcp_listen_socket 154 144 -10
getty_main 2576 2566 -10
setup 655 640 -15
xmove_fd 51 34 -17
dolisten 759 742 -17
tcpudpsvd_main 1866 1836 -30
startservice 339 299 -40
|
|
* arpping(): smaller and even probably fixed
* lots of variables/params converted: ulong -> uint32_t
* uptime() nuked in favor of monotonic_sec()
* udhcp_get_packet(): only one "bad vendor", simplify
function old new delta
reservedIp 36 35 -1
udhcpc_main 2462 2460 -2
addStaticLease 64 62 -2
static.broken_vendors 16 - -16
uptime 19 - -19
udhcpd_main 1273 1238 -35
udhcp_get_packet 223 184 -39
.rodata 144162 144106 -56
arpping 690 609 -81
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/7 up/down: 0/-251) Total: -251 bytes
text data bss dec hex filename
734241 3028 14400 751669 b7835 busybox_old
734005 3028 14400 751433 b7749 busybox_unstripped
|
|
a few global variables reduced to smallints
function old new delta
add_lease 75 227 +152
static.blank_chaddr - 16 +16
MAC_BCAST_ADDR - 6 +6
sockfd 4 8 +4
udhcp_run_script 1153 1155 +2
state 8 5 -3
listen_mode 4 1 -3
perform_release 152 148 -4
fd 8 4 -4
blank_chaddr 16 - -16
udhcpc_main 2518 2497 -21
.rodata 131864 131832 -32
oldest_expired_lease 61 - -61
clear_lease 127 - -127
------------------------------------------------------------------------------
(add/remove: 2/3 grow/shrink: 3/6 up/down: 180/-271) Total: -91 bytes
|
|
|
|
use them where appropriate. 200 bytes saved
|
|
|
|
Eliminate (group) a lot of smallish *.h files
Remove lots of unneeded #includes
|
|
|
|
|
|
bb_xx_msg calls, and convert networking/* to it.
The rest of bbox will be converted gradually.
|
|
|
|
|