| Age | Commit message (Collapse) | Author |
|---|
|
PLATFORM_LINUX is a hidden configuration option which is disabled by
default and enabled at over a hundred locations for features that are
deemed to be Linux specific.
The only effect of PLATFORM_LINUX is to control compilation of
libbb/match_fstype.c. This file is only needed by mount and umount.
Remove all references to PLATFORM_LINUX and compile match_fstype.c
if mount or umount is enabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Back in 2007, commit 0c97c9d43707 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.
This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.
The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)
function old new delta
bb_info_msg - 182 +182
bb_vinfo_msg - 27 +27
static.log7 194 198 +4
log8 190 191 +1
log5 190 191 +1
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes
If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:
function old new delta
static.log7 194 200 +6
log8 190 193 +3
log5 190 193 +3
syslog_level 1 - -1
bb_verror_msg 583 581 -2
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
vgetopt32 1318 1392 +74
runsvdir_main 703 713 +10
bb_make_directory 423 425 +2
collect_cpu 546 545 -1
opt_chars 3 - -3
opt_complementary 4 - -4
tftpd_main 567 562 -5
ntp_init 476 471 -5
zcip_main 1266 1256 -10
xxd_main 428 418 -10
whois_main 140 130 -10
who_main 463 453 -10
which_main 212 202 -10
wget_main 2535 2525 -10
watchdog_main 291 281 -10
watch_main 222 212 -10
vlock_main 399 389 -10
uuencode_main 332 322 -10
uudecode_main 316 306 -10
unlink_main 45 35 -10
udhcpd_main 1482 1472 -10
udhcpc_main 2762 2752 -10
tune2fs_main 290 280 -10
tunctl_main 366 356 -10
truncate_main 218 208 -10
tr_main 518 508 -10
time_main 1134 1124 -10
tftp_main 286 276 -10
telnetd_main 1873 1863 -10
tcpudpsvd_main 1785 1775 -10
taskset_main 521 511 -10
tar_main 1009 999 -10
tail_main 1644 1634 -10
syslogd_main 1967 1957 -10
switch_root_main 368 358 -10
svlogd_main 1454 1444 -10
sv 1296 1286 -10
stat_main 104 94 -10
start_stop_daemon_main 1028 1018 -10
split_main 542 532 -10
sort_main 796 786 -10
slattach_main 624 614 -10
shuf_main 504 494 -10
setsid_main 96 86 -10
setserial_main 1132 1122 -10
setfont_main 388 378 -10
setconsole_main 78 68 -10
sendmail_main 1209 1199 -10
sed_main 677 667 -10
script_main 1077 1067 -10
run_parts_main 325 315 -10
rtcwake_main 454 444 -10
rm_main 175 165 -10
reformime_main 119 109 -10
readlink_main 123 113 -10
rdate_main 246 236 -10
pwdx_main 189 179 -10
pstree_main 317 307 -10
pscan_main 663 653 -10
popmaildir_main 818 808 -10
pmap_main 80 70 -10
nc_main 1042 1032 -10
mv_main 558 548 -10
mountpoint_main 477 467 -10
mount_main 1264 1254 -10
modprobe_main 768 758 -10
modinfo_main 333 323 -10
mktemp_main 200 190 -10
mkswap_main 324 314 -10
mkfs_vfat_main 1489 1479 -10
microcom_main 715 705 -10
md5_sha1_sum_main 521 511 -10
man_main 867 857 -10
makedevs_main 1052 1042 -10
ls_main 563 553 -10
losetup_main 432 422 -10
loadfont_main 89 79 -10
ln_main 524 514 -10
link_main 75 65 -10
ipcalc_main 544 534 -10
iostat_main 2397 2387 -10
install_main 768 758 -10
id_main 480 470 -10
i2cset_main 1239 1229 -10
i2cget_main 380 370 -10
i2cdump_main 1482 1472 -10
i2cdetect_main 682 672 -10
hwclock_main 406 396 -10
httpd_main 741 731 -10
grep_main 837 827 -10
getty_main 1559 1549 -10
fuser_main 297 287 -10
ftpgetput_main 345 335 -10
ftpd_main 2232 2222 -10
fstrim_main 251 241 -10
fsfreeze_main 77 67 -10
fsck_minix_main 2921 2911 -10
flock_main 314 304 -10
flashcp_main 740 730 -10
flash_eraseall_main 833 823 -10
fdformat_main 532 522 -10
expand_main 680 670 -10
eject_main 335 325 -10
dumpleases_main 630 620 -10
du_main 314 304 -10
dos2unix_main 441 431 -10
diff_main 1350 1340 -10
df_main 1064 1054 -10
date_main 1095 1085 -10
cut_main 961 951 -10
cryptpw_main 228 218 -10
crontab_main 575 565 -10
crond_main 1149 1139 -10
cp_main 370 360 -10
common_traceroute_main 3834 3824 -10
common_ping_main 1767 1757 -10
comm_main 239 229 -10
cmp_main 655 645 -10
chrt_main 379 369 -10
chpst_main 704 694 -10
chpasswd_main 308 298 -10
chown_main 171 161 -10
chmod_main 158 148 -10
cat_main 428 418 -10
bzip2_main 120 110 -10
blkdiscard_main 264 254 -10
base64_main 221 211 -10
arping_main 1665 1655 -10
ar_main 556 546 -10
adjtimex_main 406 396 -10
adduser_main 882 872 -10
addgroup_main 411 401 -10
acpid_main 1198 1188 -10
optstring 11 - -11
opt_string 18 - -18
OPT_STR 25 - -25
ubi_tools_main 1288 1258 -30
ls_options 31 - -31
------------------------------------------------------------------------------
(add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes
text data bss dec hex filename
915428 485 6876 922789 e14a5 busybox_old
914629 485 6872 921986 e1182 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Those two spaces after tab have no effect, and always a nuisance when editing.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The config item is FEATURE_USE_BSS_TAIL. When it is off (default):
function old new delta
read_config 210 228 +18
doCommands 2279 2294 +15
ipneigh_list_or_flush 763 772 +9
ipaddr_list_or_flush 1256 1261 +5
display_process_list 1301 1306 +5
conspy_main 1378 1383 +5
do_lzo_compress 352 355 +3
do_lzo_decompress 565 567 +2
push 46 44 -2
inetd_main 2136 2134 -2
uevent_main 421 418 -3
addLines 97 92 -5
bb_common_bufsiz1 8193 1024 -7169
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181) Total: -7119 bytes
text data bss dec hex filename
829850 4086 9080 843016 cdd08 busybox_old
829901 4086 1904 835891 cc133 busybox_unstripped
FEATURE_USE_BSS_TAIL=y:
read_config 210 228 +18
doCommands 2279 2294 +15
ipneigh_list_or_flush 763 772 +9
ipaddr_list_or_flush 1256 1261 +5
display_process_list 1301 1306 +5
conspy_main 1378 1383 +5
do_lzo_compress 352 355 +3
do_lzo_decompress 565 567 +2
inetd_main 2136 2134 -2
bb_common_bufsiz1 8193 - -8193
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195) Total: -8133 bytes
text data bss dec hex filename
829850 4086 9080 843016 cdd08 busybox_old
829911 4086 880 834877 cbd3d busybox_unstripped
FIXME: setup_common_bufsiz() calls are missing.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
send_arp_request - 185 +185
zcip_main 1273 1272 -1
pick_nip 40 - -40
arp 185 - -185
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 0/1 up/down: 185/-226) Total: -41 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
zcip_main 1263 1230 -33
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
zcip_main 1411 1263 -148
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Commit "zcip: fix link-local IP conflict detection" has introduced
wrong comparsion of source IP with our IP. This leads to a new IP
being picked unnecessarily on every incoming ARP packet.
Signed-off-by: Vladislav Grishenko <themiron@mail.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bb_logenv_override - 70 +70
packed_usage 29969 30033 +64
zcip_main 1426 1431 +5
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 2/0 up/down: 139/0) Total: 139 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
169.254 may already be used by a local network. This patch allows
specifying your own IP range.
Our particular use case is a mesh network, in which the nodes partaking
were using an IP range specifically assigned for the meshing purpose.
As the LAN side of the mesh node could use 169.254, this default range
was not an option.
function old new delta
zcip_main 1342 1426 +84
pick_nip - 40 +40
packed_usage 29974 29969 -5
pick 34 - -34
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 1/1 up/down: 124/-39) Total: 85 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
During link-local IP resolution, if a regular ARP request is received
during the ARP probe period, it will incorrectly cause a target IP
conflict. This then leads to a new IP being picked unnecessarily.
Per RFC 3927, section 2.2.1, we should flag a target IP conflict only if
the source IP is null, the target IP matches our IP, and the source
hw addr does not match our hw addr.
function old new delta
zcip_main 1354 1322 -32
Signed-off-by: Ken Sharp <ken.sharp@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Dan Fandrich <dan@coneharvesters.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
packed_usage 28706 28623 -83
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Pere Orga <gotrunks@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This change retains "or later" state! No licensing _changes_ here,
only form is adjusted (article, space between "GPL" and "v2" and so on).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
parse 964 967 +3
udhcp_run_script 670 665 -5
singlemount 911 906 -5
mount_it_now 360 355 -5
inotifyd_main 521 516 -5
xspawn 21 - -21
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/4 up/down: 3/-41) Total: -38 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
whoami_main 34 37 +3
logname_main 60 63 +3
hostid_main 35 38 +3
ttysize_main 136 135 -1
nmeter_main 673 672 -1
logger_main 387 386 -1
uuencode_main 330 328 -2
ifupdown_main 2125 2123 -2
mesg_main 158 155 -3
free_main 333 330 -3
cal_main 902 899 -3
acpid_main 443 440 -3
ar_main 196 189 -7
find_main 476 467 -9
ifconfig_main 1235 1221 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/12 up/down: 9/-49) Total: -40 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcpd_main 1239 1257 +18
udhcp_add_simple_option 93 92 -1
buffer_read_le_u32 19 18 -1
unpack_gz_stream_with_info 526 520 -6
dnsd_main 1470 1463 -7
udhcp_run_script 1208 1186 -22
send_ACK 255 229 -26
arping_main 1661 1623 -38
send_offer 470 428 -42
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/8 up/down: 18/-143) Total: -125 bytes
|
|
function old new delta
...
udhcp_read_interface 225 220 -5
brctl_main 1151 1146 -5
add_interface 109 104 -5
ipaddr_list_or_flush 2174 2167 -7
do_add_ioctl 88 80 -8
vconfig_main 249 240 -9
do_del_ioctl 78 68 -10
do_iplink 1186 1173 -13
do_if_fetch 766 753 -13
buffer_fill_and_print 196 179 -17
parse_args 1709 1684 -25
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/20 up/down: 11/-140) Total: -129 bytes
|
|
function old new delta
packed_usage 24750 24787 +37
run 658 655 -3
pick 40 34 -6
arp 186 177 -9
zcip_main 1402 1356 -46
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/4 up/down: 37/-64) Total: -27 bytes
|
|
*: s/setenv(a,b,1)/xsetenv(a,b)/
function old new delta
init_main 856 895 +39
message 146 144 -2
crond_main 1418 1416 -2
run 661 658 -3
zcip_main 1409 1403 -6
edit_file 910 901 -9
environment 20 - -20
|
|
|
|
Some are fixing real bugs.
function old new delta
syslogd_main 938 958 +20
get_signum 136 143 +7
obj_load 777 782 +5
recv_from_to 210 214 +4
get_next_block 1795 1799 +4
display_topmem_process_list 1117 1121 +4
logread_main 484 487 +3
buffer_fill_and_print 73 76 +3
kill_main 687 689 +2
ll_remember_index 240 241 +1
do_stats 452 453 +1
if_readconf 166 165 -1
display_process_list 1192 1191 -1
run_applet_and_exit 507 505 -2
print_signames 33 31 -2
parse_one_line 1092 1090 -2
find_out_spec 57 55 -2
add_ksymoops_symbols 421 419 -2
ash_main 1407 1402 -5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 11/8 up/down: 54/-17) Total: 37 bytes
|
|
only makes strip writer's life more miserable. Who want
to have zcip run in root dir, can trivially do that.
|
|
(else we can thrash syslog socket)
|
|
|
|
|
|
arping: fix wrong roundtrip calculation
arping,zcip: cleanups and code shrink
run 389 402 +13
arp 195 188 -7
zcip_main 1524 1495 -29
arping_main 1874 1823 -51
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 13/-87) Total: -74 bytes
text data bss dec hex filename
776587 929 9100 786616 c00b8 busybox_old
776499 929 9100 786528 c0060 busybox_unstripped
|
|
EXTERNALLY_VISIBLE. 5% size reduction of libbusybox.so
|
|
|
|
function old new delta
safe_poll - 77 +77
svlogd_main 1470 1466 -4
zcip_main 1530 1524 -6
forkexec 1345 1338 -7
decode_format_string 795 788 -7
collect_blk 474 467 -7
buffer_pread 540 532 -8
tftp 1182 1172 -10
microcom_main 763 749 -14
arpping 441 424 -17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/9 up/down: 77/-80) Total: -3 bytes
text data bss dec hex filename
770162 1034 10404 781600 bed20 busybox_old
770158 1034 10404 781596 bed1c busybox_unstripped
|
|
(add/remove: 0/0 grow/shrink: 12/131 up/down: 91/-727) Total: -636 bytes
text data bss dec hex filename
773469 1058 11092 785619 bfcd3 busybox_old
772644 1058 11092 784794 bf99a busybox_unstripped
|
|
rand48 machinery:
zcip_main 1552 1537 -15
seed48 22 - -22
__libc_drand48_data 24 - -24
seed48_r 78 - -78
__GI_seed48_r 78 - -78
------------------------------------------------------------------------------
(add/remove: 0/4 grow/shrink: 0/1 up/down: 0/-217) Total: -217 bytes
|
|
function old new delta
do_iptunnel 203 977 +774
process_dev 5328 5494 +166
ioctl_or_perror - 54 +54
ioctl_or_perror_and_die - 51 +51
ioctl_alt_func - 49 +49
bb_ioctl_or_warn - 47 +47
do_add_ioctl 102 145 +43
bb_xioctl - 39 +39
print_value_on_off - 31 +31
get_lcm 105 123 +18
arp_main 2155 2167 +12
..................
zcip_main 1576 1566 -10
setlogcons_main 92 82 -10
dumpkmap_main 263 253 -10
do_get_ioctl 85 75 -10
setkeycodes_main 165 154 -11
write_table 244 232 -12
vconfig_main 318 306 -12
do_del_ioctl 93 81 -12
set_address 75 62 -13
maybe_set_utc 30 16 -14
loadfont_main 495 479 -16
slattach_main 712 695 -17
do_loadfont 191 174 -17
do_iplink 1155 1136 -19
getty_main 2583 2562 -21
fbset_main 2058 2035 -23
do_time 588 565 -23
xioctl 25 - -25
read_rtc 186 160 -26
parse_conf 1299 1270 -29
udhcp_read_interface 269 239 -30
bb_ioctl 45 - -45
bb_ioctl_alt 70 - -70
bb_ioctl_on_off 78 - -78
.rodata 129370 129018 -352
do_show 799 - -799
------------------------------------------------------------------------------
(add/remove: 6/5 grow/shrink: 13/49 up/down: 1316/-1864) Total: -548 bytes
text data bss dec hex filename
675352 2740 13968 692060 a8f5c busybox_old
674804 2740 13968 691512 a8d38 busybox_unstripped
|
|
zcip: use monotonic_us instead of gettimeofday
udhcpcd: simpler, shorter random_xid()
function old new delta
monotonic_sec - 41 +41
find_pair 164 180 +16
run_list_real 2018 2028 +10
cmp_main 547 555 +8
collect_ctx 112 119 +7
singlemount 4544 4549 +5
time_main 1124 1128 +4
static.start_sec - 4 +4
static.lastupdate_sec - 4 +4
sock - 4 +4
read_package_field 253 257 +4
pick 38 40 +2
get_next_line 145 147 +2
count_lines 59 61 +2
process_stdin 435 433 -2
xstrtoul_range_sfx 229 226 -3
static.initialized 4 1 -3
dhcprelay_main 1125 1122 -3
catcher 380 377 -3
arping_main 1969 1966 -3
s 8 4 -4
cfg 4 - -4
static.lastupdate 8 - -8
start 8 - -8
random_xid 95 33 -62
.rodata 129114 129050 -64
zcip_main 1731 1576 -155
progressmeter 1035 867 -168
------------------------------------------------------------------------------
(add/remove: 4/3 grow/shrink: 10/11 up/down: 113/-490) Total: -377 bytes
|
