Age | Commit message (Collapse) | Author |
|
function old new delta
nslookup_main 1880 1832 -48
parse_reply 1022 852 -170
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-218) Total: -218 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
rcodes 68 64 -4
nslookup_main 2007 1880 -127
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-131) Total: -131 bytes
text data bss dec hex filename
926735 555 5740 933030 e3ca6 busybox_old
926525 555 5740 932820 e3bd4 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
nslookup_main 2091 2007 -84
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
nslookup_main 2363 2091 -272
add_ns 663 65 -598
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-870) Total: -870 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Needs work on size reduction
function old new delta
nslookup_main 114 2363 +2249
parse_reply - 1022 +1022
add_ns - 663 +663
ns_parserr - 486 +486
ns_initparse - 184 +184
ns_skiprr - 117 +117
add_query - 95 +95
qtypes - 80 +80
rcodes - 68 +68
dn_skipname - 58 +58
ns_name_uncompress - 56 +56
ns_get16 - 13 +13
v4_mapped - 12 +12
ns_get32 - 9 +9
res_init 3 - -3
__res_state 6 - -6
xmalloc_sockaddr2hostonly_noport 10 - -10
gai_strerror 47 - -47
set_default_dns 95 - -95
print_host 199 - -199
static.res 512 - -512
------------------------------------------------------------------------------
(add/remove: 15/10 grow/shrink: 1/0 up/down: 5112/-872) Total: 4240 bytes
text data bss dec hex filename
921944 555 6252 928751 e2bef busybox_old
927375 555 5740 933670 e3f26 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
udhcp_str2optset 536 628 +92
packed_usage 32757 32760 +3
udhcpc_main 2708 2692 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 95/-16) Total: 79 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
retrieve_file_data 428 465 +37
wget_main 2386 2389 +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 40/0) Total: 40 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
debug code
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Users will be able to use "ftpd -A" in scripts regardless of build config
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
packed_usage 32745 32777 +32
ftpd_main 2162 2156 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 32/-6) Total: 26 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
wget_main 2382 2386 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 4/0) Total: 4 bytes
text data bss dec hex filename
934228 477 7296 942001 e5fb1 busybox_old
934202 477 7296 941975 e5f97 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Instead, simply don't send this header.
On Mon, Apr 2, 2018 at 8:17 PM, xisd <xisd-dev@riseup.net> wrote:
> I had some trouble using busybox httpd to serve a static website and I
> thought the issue might be of interest.
>
> My problem is related to something that seem quite common for static
> site generator : the use of html files without the '.html' extension
> (it is called 'clean url'...)
>
> Most web server guess that these files are html and display them like
> any other .html files.
>
> From what I understood, the MIME type for files without extension in
> busybox htttp default settings is 'application/octet-stream', and
> because of that 'clean url' pages are not displayed.
>
> It is only trouble because I wanted to deploy my website on freshly
> installed linux without editing any configuration.
>
> The default MIME setting make sense to me as it is, I just thought that
> might be worth mentioning since the use of 'clean url' seem to be a
> common practice for static sites generators (the one I use is callled
> 'yellow' (https://github.com/datenstrom/yellow))
>
> Here is a link for the related issue on github :
> https://github.com/datenstrom/yellow/issues/317
function old new delta
send_headers 702 718 +16
send_headers_and_exit 23 20 -3
handle_incoming_and_exit 2794 2791 -3
send_file_and_exit 772 756 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 16/-22) Total: -6 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bb_die_memory_exhausted - 10 +10
xstrdup 28 23 -5
xsetenv 27 22 -5
xrealloc 32 27 -5
xputenv 22 17 -5
xmalloc 30 25 -5
xfdopen_helper 40 35 -5
xasprintf 44 39 -5
wget_main 2387 2382 -5
open_socket 54 49 -5
glob_brace 419 414 -5
bb_get_chunk_from_file 146 141 -5
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/11 up/down: 10/-55) Total: -45 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When using ifplugd on a RNDIS interface with monitor mode, using
SIOCSIFFLAGS seems to fail with EADDRNOTAVAIL. Treat it the same
as if iface disappeared again.
This has been observed on a Tegra TK1 using Linux 4.14. There seem
to be a race when the kernel is creating the device:
ifplugd(usb0): started: BusyBox v1.24.1 (2018-03-27 09:47:48 CEST)
ifplugd(usb0): interface doesn't exist, waiting
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): setting interface flags failed: Cannot assign requested address
<exit>
With this patch ifplugd is successful in upping the device the second
time around:
ifplugd(usb0): upping interface
ifplugd(usb0): using SIOCETHTOOL detection mode
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): setting interface flags failed: Cannot assign requested address
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): using SIOCETHTOOL detection mode
ifplugd(usb0): link is up
ifplugd(usb0): executing '/etc/ifplugd/ifplugd.usb.action usb0 up'
ifplugd up
ifplugd(usb0): exit code: 0
function old new delta
up_iface 120 127 +7
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Interface may not exist because it got deleted by an ifdown hook script
earlier. This may happen when a virtual interface, such as VLAN, has multiple
iface blocks defined.
function old new delta
static_down6 14 40 +26
static_down 54 70 +16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 42/0) Total: 42 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
INET6_setroute 492 472 -20
do_iplink 1357 1330 -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-47) Total: -47 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
If we don't ask for numerical output, and the symbolic look-up failed
we used to get "(null)", but the numeric output would be better.
function old new delta
ip_port_str 109 121 +12
Signed-off-by: Mark Marshall <mark.marshall@omicronenergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The wrong character was used to indicate options taking an integer
parameter.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
text data bss dec hex filename
933035 473 6836 940344 e5938 busybox_old
933051 473 6836 940360 e5948 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
update_local_clock 834 858 +24
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
EINTR _should_ only happen on two signals we trap, and safe_poll
_should_ work here just fine, but there were kernel bugs where spurious EINTRs
happen (e.g. on ptrace attach). Be safe.
function old new delta
udhcpd_main 1437 1468 +31
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
In other words: try to correct initially existing clock offset first,
before assuming that our clock drifts.
function old new delta
update_local_clock 826 834 +8
ntp_init 550 557 +7
filter_datapoints 179 173 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 15/-6) Total: 9 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Fixes:
commit 52a515d18724bbb34e3ccbbb0218efcc4eccc0a8
"udhcp: use poll() instead of select()"
Feb 16 2017
udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read.
In the above commit, it was changed as follows:
- if (!FD_ISSET(signal_pipe.rd, rfds))
+ if (!pfds[0].revents)
return 0;
The problem is, the check was working for select() purely by accident.
Caught signal interrupts select()/poll() syscalls, they return with EINTR
(regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked.
IOW: they can't see any changes to fd state caused by signal haldler
(in our case, signal handler makes signal pipe ready to be read).
For select(), it means that rfds[] bit array is unmodified, bit of signal
pipe's read fd is still set, and the above check "works": it thinks select()
says there is data to read.
This accident does not work for poll(): .revents stays clear, and we do not
try reading signal pipe as we should. In udhcpd, we fall through and block
in socket read. Further SIGTERM signals simply cause socket read to be
interrupted and then restarted (since SIGTERM handler has SA_RESTART=1).
Fixing this as follows: remove the check altogether. Set signal pipe read fd
to nonblocking mode. Always read it in udhcp_sp_read().
If read fails, assume it's EAGAIN and return 0 ("no signal seen").
udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR
(using safe_poll()) - thus ensuring we have correct .revents for all fds -
and calling udhcp_sp_read() only if pfds[0].revents!=0.
udhcpc performs much fewer reads (typically it sleeps >99.999% of the time),
there is no need to optimize it: can call udhcp_sp_read() after each poll
unconditionally.
To robustify socket reads, unconditionally set pfds[1].revents=0
in udhcp_sp_fd_set() (which is before poll), and check it before reading
network socket in udhcpd.
TODO:
This might still fail: if pfds[1].revents=POLLIN, socket read may still block.
There are rare cases when select/poll indicates that data can be read,
but then actual read still blocks (one such case is UDP packets with
wrong checksum). General advise is, if you use a poll/select loop,
keep all your fds nonblocking.
Maybe we should also do that to our network sockets?
function old new delta
udhcp_sp_setup 55 65 +10
udhcp_sp_fd_set 54 60 +6
udhcp_sp_read 46 36 -10
udhcpd_main 1451 1437 -14
udhcpc_main 2723 2708 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
packed_usage 32547 32550 +3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This avoids pulling in gmtime's static buffer:
function old new delta
svlogd_main 1401 1412 +11
send_headers 668 678 +10
gmtime 21 - -21
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 2/0 up/down: 21/-21) Total: 0 bytes
text data bss dec hex filename
920221 555 5804 926580 e2374 busybox_old
920221 555 5740 926516 e2334 busybox_unstripped
^^^^
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
These were data/bss:
static.proc_read 1 - -1
int_list 4 - -4
int_last 4 - -4
We never call display_interfaces() twice, thus code to not scan /proc twice
never triggers.
function old new delta
do_if_print - 1998 +1998
display_interfaces 145 249 +104
static.proc_read 1 - -1
add_interface 104 103 -1
int_list 4 - -4
int_last 4 - -4
if_readlist_proc 560 542 -18
if_readconf 141 - -141
do_if_fetch 643 - -643
ife_print 1296 - -1296
------------------------------------------------------------------------------
(add/remove: 1/6 grow/shrink: 1/2 up/down: 2102/-2108) Total: -6 bytes
text data bss dec hex filename
933084 473 6844 940401 e5971 busybox_old
933087 473 6836 940396 e596c busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
ife_print 1293 1296 +3
display_interfaces 145 146 +1
if_readconf 162 141 -21
if_readlist_proc 631 560 -71
do_if_fetch 753 643 -110
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 4/-202) Total: -198 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When fetching a https:// URL with HTTP proxy configured
(e.g. with environment variable http_proxy=http://your-proxy:3128)
busybox was making a https connection to the proxy.
This was because the protocol scheme for the target URL was used to determine whether to connect to the proxy over SSL or not.
When the proxy is in use, the decision on whether to connect to the proxy over https
should based on the proxy URL not on the target URL.
function old new delta
wget_main 2381 2387 +6
Signed-off-by: Peter Lloyd <l-busybox@pgl22.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
tcpudpsvd_main 1775 1780 +5
ipsvd_perhost_add 108 107 -1
cclen 4 - -4
cc 4 - -4
ipsvd_perhost_init 30 25 -5
ipsvd_perhost_remove 80 44 -36
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 1/3 up/down: 5/-50) Total: -45 bytes
text data bss dec hex filename
933358 473 6852 940683 e5a8b busybox_old
933326 473 6844 940643 e5a63 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Attaching an interface to a VRF is done by setting the interface's
master. Besides VRF, this can also be used for bridges.
function old new delta
set_master - 142 +142
do_iplink 1262 1357 +95
packed_usage 32546 32539 -7
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 237/-7) Total: 230 bytes
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
VRF interfaces have a mandatory table parameter, which needs to be
specified using a RTNL attribute.
function old new delta
do_add_or_delete 1150 1254 +104
packed_usage 32444 32546 +102
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 206/0) Total: 206 bytes
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
tls_xread_record 499 489 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
sendping6 80 85 +5
sendping4 106 111 +5
sendping_tail 209 204 -5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 10/-5) Total: 5 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
common_ping_main 1757 1862 +105
packed_usage 32367 32427 +60
sendping_tail 236 209 -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 165/-27) Total: 138 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
get_sanitized_hdr - 156 +156
fgets_trim_sanitize - 128 +128
ftpcmd 129 133 +4
parse_url 461 454 -7
sanitize_string 14 - -14
wget_main 2431 2381 -50
fgets_and_trim 119 - -119
gethdr 163 - -163
------------------------------------------------------------------------------
(add/remove: 2/3 grow/shrink: 1/2 up/down: 288/-353) Total: -65 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
catcher 310 309 -1
arping_main 1668 1641 -27
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bb_getsockname - 18 +18
xrtnl_open 88 83 -5
do_iplink 1216 1209 -7
arping_main 1686 1668 -18
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 0/3 up/down: 18/-30) Total: -12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This way, we can zero them all in one go.
We do malloc() anyway, thus nothing is lost by mallocing "globals"
function old new delta
arping_main 1683 1686 +3
finish 100 86 -14
catcher 350 310 -40
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 3/-54) Total: -51 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
arping_main 1629 1635 +6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
ARPING 192.168.1.1 from 192.168.1.172 wlan0
Unicast reply from 192.168.1.1 [F4:F2:6D:52:A8:DE] 1.672ms
Sent 1 probes (1 broadcast(s))
Received 1 response(s)
ARPING 192.168.1.1 from 192.168.1.172 wlan0
Unicast reply from 192.168.1.1 [f4:f2:6d:52:a8:de] 1.152ms
Sent 1 probe(s) (1 broadcast(s))
Received 1 response(s) (0 request(s), 0 broadcast(s))
function old new delta
finish 120 100 -20
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Do not clear extra bits on option_mask32, it's not necessary.
Move DAD bit to 2, this makes exit logic simpler.
function old new delta
arping_main 1655 1629 -26
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
parse_rtattr() was using tb[] array without initializing it.
Based on patch by Balaji Punnuru <balaji_punnuru@cable.comcast.com>
function old new delta
parse_rtattr 85 107 +22
print_route 1630 1617 -13
print_linkinfo 807 794 -13
iproute_get 835 822 -13
print_rule 680 665 -15
ll_remember_index 263 248 -15
print_addrinfo 1223 1197 -26
ipaddr_list_or_flush 1253 1223 -30
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/7 up/down: 22/-125) Total: -103 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
wget_main 2422 2431 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Since bb_info_msg() was eliminated type of buffering on stdout is not important
function old new delta
udhcpd_main 1463 1451 -12
udhcpc_main 2735 2723 -12
setlinebuf 19 - -19
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/2 up/down: 0/-43) Total: -43 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
wget_main 2382 2422 +40
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|