aboutsummaryrefslogtreecommitdiff
path: root/networking
AgeCommit message (Collapse)Author
2015-01-05libbb: code shrink by factoring out common update_utmp_DEAD_PROCESSDenys Vlasenko
function old new delta update_utmp_DEAD_PROCESS - 17 +17 telnetd_main 1685 1674 -11 mark_terminated 56 45 -11 handle_sigchld 74 63 -11 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-01-05deleting unused ntpd_simple.cDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-01-04ntpd: relicense ntpd applet to ISC-style licenseAdam Tkac
OpenNTPd is licensed under ISC-style license so it's good idea to keep ntpd applet under same license to avoid mess, instead of having our changes to be under GPL. Names of original code's authors are added. Signed-off-by: Adam Tkac <vonsch@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-12-25udhcpd: account for script delay in leaseJohn Schroeder
Prevent nasty surprises if script runs longer than lease time / 2. Signed-off-by: John Schroeder <jschroed@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-12-21udhcpc: account for script run timeDenys Vlasenko
Based on the following user report: I ran into an issue where I was seeing a long delay in the scripts called in udhcp_run_script. I was using an old version of OpenWrt (kamikaze) and a satellite modem. An NTP script was being called and the modem would sometimes take a long time to respond to the DNS lookup when it was offline. This delay started affecting my lease time. The lease that I would get from my satellite modem before it was online would be short: only 60 seconds. The delay with NTP and the modem would typically be about 18 seconds. This would cause the first DHCP renew request from dhcpc to be a little late. Under certain circumstances, I could even see the first DHCP renew to occur after the lease had expired! function old new delta udhcpc_main 2816 2837 +21 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-11-27libbb: use sendfile() to copy data between file descriptorsBartosz Golaszewski
Busybox already uses sendfile in httpd. This patch proposes to use it globally to copy data between file descriptors. It speeds up the copying on slow systems a lot - below are the times needed to copy a 450Mb file with and without this option enabled on a BeagleBone Black: sendfile: user 0m0.000s sys 0m8.170s read/write 4k: user 0m0.470s sys 0m16.300s function old new delta bb_full_fd_action 394 474 +80 Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-11-25udhcpd: if a lease from lease file coincides with a static one, ignore itDenys Vlasenko
function old new delta read_leases 269 328 +59 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-11-17iproute: support onelink route option and print route flagsMichael Tokarev
function old new delta print_route 1797 1865 +68 do_iproute 2097 2112 +15 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 83/0) Total: 83 bytes Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-11-04zcip: Add environment variable for overriding log functionalityMichel Stam
function old new delta bb_logenv_override - 70 +70 packed_usage 29969 30033 +64 zcip_main 1426 1431 +5 ------------------------------------------------------------------------------ (add/remove: 2/0 grow/shrink: 2/0 up/down: 139/0) Total: 139 bytes Signed-off-by: Michel Stam <m.stam@fugro.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-30zcip: allow our own class B range to be used for ZeroConfMichel Stam
169.254 may already be used by a local network. This patch allows specifying your own IP range. Our particular use case is a mesh network, in which the nodes partaking were using an IP range specifically assigned for the meshing purpose. As the LAN side of the mesh node could use 169.254, this default range was not an option. function old new delta zcip_main 1342 1426 +84 pick_nip - 40 +40 packed_usage 29974 29969 -5 pick 34 - -34 ------------------------------------------------------------------------------ (add/remove: 1/1 grow/shrink: 1/1 up/down: 124/-39) Total: 85 bytes Signed-off-by: Michel Stam <m.stam@fugro.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-30udhcpd: add option for tweaking arppingMichel Stam
Some clients have a very short timeout for sending the DHCP DISCOVER, shorter than the arpping timeout of 2000 milliseconds that udhcpd uses by default. This patch allows tweaking the timeout, or disabling of arpping altogether, at the risk of handing out addresses which are already in use. function old new delta udhcpd_main 1460 1501 +41 udhcpc_main 2814 2851 +37 packed_usage 29957 29974 +17 arpping 477 493 +16 find_free_or_expired_nip 161 174 +13 send_offer 285 292 +7 nobody_responds_to_arp 85 89 +4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0) Total: 135 bytes Signed-off-by: Michel Stam <m.stam@fugro.nl> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-05ntpd: calculate offset to jitter ratio before updating jitterMiroslav Lichvar
The offset to jitter ratio is now calculated before updating jitter to make the test more sensitive. function old new delta ntp_init 460 474 +14 update_local_clock 752 764 +12 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 26/0) Total: 26 bytes Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-02ntpd: don't stay at short polling intervalMiroslav Lichvar
To avoid polling servers frequently slowly increase the interval up to BIGPOLL when - no replies are received from a peer - no source can be selected - peer claims to be unsynchronized (e.g. we are polling it too frequently) When recv() returns with an error, drop code to try to continue on network errors: I'm not convinced those cases happen in real life. function old new delta recv_and_process_peer_pkt 919 838 -81 Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-27ntpd: be less eager to use shorter poll intervalsDenys Vlasenko
* on step, poll interval drops to 8.5 mins instead of 32 seconds * on total loss of all replies (no replies from any peer for last 8 requests), also drop poll interval to 8.5 mins instead of 32 seconds * on send abd recv errors, RETRY_INTERVAL is now 32 seconds, not 5 seconds * on timing out listening to reply, instead of unconditional shortening poll interval by x4, clamp it to NOREPLY_INTERVAL (512 seconds) * if a largish offset is seen, clamp nexp poll interval to 128 seconds, not 64 seconds function old new delta clamp_pollexp_and_set_MAXSTRAT - 37 +37 recv_and_process_peer_pkt 861 869 +8 poll_interval 52 48 -4 update_local_clock 762 752 -10 ntpd_main 1063 1050 -13 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/3 up/down: 45/-27) Total: 18 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-24ntpd: split out poll adjusting codeMiroslav Lichvar
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-24ntpd: don't wait for good offset before disabling burst modeMiroslav Lichvar
The burst mode needs to be stopped even when no replies are received. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-15ftpd: make LIST command show dotfiles tooDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-04tftpd: tweak HP PA-RISC firmware bug compatibilityDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-03tftpd: support full 512-byte requestsDenys Vlasenko
Some HP PA-RISC firmware always sends fixed 512-byte requests, with trailing garbage. function old new delta tftpd_main 578 572 -6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-27ping: add -p to specify data patternFlorian Fainelli
function old new delta common_ping_main 1788 1831 +43 sendping6 56 82 +26 sendping4 82 108 +26 packed_usage 29959 29938 -21 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/1 up/down: 95/-21) Total: 74 bytes Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-08-05ftpd: add optional support for authenticationMorten Kvistgaard
function old new delta cmdio_get_cmd_and_arg - 237 +237 get_passwd - 97 +97 check_password - 82 +82 ftpd_main 2297 2178 -119 ask_and_check_password_extended 206 84 -122 ------------------------------------------------------------------------------ (add/remove: 3/0 grow/shrink: 0/2 up/down: 416/-241) Total: 175 bytes Signed-off-by: Morten Kvistgaard <MK@pch-engineering.dk> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-20zcip: fix link-local IP conflict detectionKen Sharp
During link-local IP resolution, if a regular ARP request is received during the ARP probe period, it will incorrectly cause a target IP conflict. This then leads to a new IP being picked unnecessarily. Per RFC 3927, section 2.2.1, we should flag a target IP conflict only if the source IP is null, the target IP matches our IP, and the source hw addr does not match our hw addr. function old new delta zcip_main 1354 1322 -32 Signed-off-by: Ken Sharp <ken.sharp@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-16udhcp: add PXELINUX path prefix option (code 210) definitionJeremy Kerr
Like d3092c99, this change adds support for the DHCP "path-prefix" option, as defined in RFC 5071. We use the string identifer "pxepathprefix". Adding this option makes string parsing in the hook scripts simpler. function old new delta dhcp_option_strings 255 269 +14 dhcp_optflags 72 74 +2 Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-15ntpd: add support for -I IFACEDenys Vlasenko
function old new delta packed_usage 29908 29947 +39 ntp_init 428 460 +32 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 71/0) Total: 71 bytes Signed-off-by: Nikolaus Froehlich <nikolaus@mathematik.uni-marburg.de> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-06-27ftpd: do not use root_fd if we are not in chrootDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-06-27ftpd: for LIST, open current directory *in the child*Denys Vlasenko
Last change introduced an open fd leak. This is the fix. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-06-27ftpd: escape chroot prior to re-executing ls helperDenys Vlasenko
When we merely chdir to saved "real" root fd, exec("proc/self/exe") works for static executables but not for dynamic ones (they can't find their interpreter). With this patch, we also *chroot* to real root. As a bonus, this gives us proper usernames, timezone conversion etc. function old new delta popen_ls 203 259 +56 ftpd_main 2362 2366 +4 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-06-26ftpd: optimize writes of LIST results a bitDenys Vlasenko
function old new delta handle_dir_common 201 207 +6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-06-25ftpd: support deprecated XPWD commandDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-06-22libbb: use a wrapper around sysconf(_SC_CLK_TCK) to save a few bytesBartosz Golaszewski
function old new delta bb_sc_clk_tck - 10 +10 timescmd 118 113 -5 print_route 1763 1758 -5 mpstat_main 1288 1283 -5 iostat_main 1947 1942 -5 INET_setroute 879 871 -8 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/5 up/down: 10/-28) Total: -18 bytes Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-06-16udhcpc: make hostname sanitization optional. Closes 3979Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-05-02libbb: rename execable -> executable. No code changesDenys Vlasenko
English speakers complained that it sounded awfully broken. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-04-20ntpd: fix wrong delay value in one of the printed messagesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-04-19ntpd: truly ignore high delay packetDenys Vlasenko
Before this cahnge, sometimes they were used after the next packet from another peer was received, because we did updare some peer stats from high delay packet before dropping it. function old new delta recv_and_process_peer_pkt 922 966 +44 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-03-27wget: fix a case where progress bar isn't updated if writes are very slowDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-03-23ntpd: add optional support for /etc/ntp.confDenys Vlasenko
function old new delta add_peers - 98 +98 packed_usage 29470 29511 +41 ntp_init 407 428 +21 pw_encrypt 14 27 +13 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 3/0 up/down: 173/0) Total: 173 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-03-05use [s]rand(), not [s]random()Denys Vlasenko
rand() is the most standard C library function, and on uclibc they are the same. I guess they are the same in most todays' libc... Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-03-01ip link: add support for "address ETHADDR". Closes 4862Denys Vlasenko
function old new delta do_iplink 2175 2289 +114 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-27udhcpc: ignore NAKs from "wrong" servers. Closes 4267Denys Vlasenko
function old new delta udhcpc_main 2716 2814 +98 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-26nc: fix option bit positions. Closes 6926Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-24wget: fix commentDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-23wget: add commented-out code to use ssl_helper instead of opensslDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-23networking/ssl_helper: experimental matrixssl-based ssl helperDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-22wget: add support for https using "openssl s_client" as a helperDenys Vlasenko
www.kernel.org started redirecting http:// to https:// making https support mandatory for any auto build scripts. function old new delta wget_main 2631 2971 +340 parse_url 409 471 +62 .rodata 115607 115626 +19 P_HTTPS - 6 +6 P_HTTP - 5 +5 P_FTP - 4 +4 ------------------------------------------------------------------------------ (add/remove: 3/0 grow/shrink: 3/0 up/down: 436/0) Total: 436 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-19udhcpc: fix BPF filter. Hopefully fixes the root cause of 4598 and 6746Denys Vlasenko
Use a *signed* large positive value in BPF filter to indicate success. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-10ifplugd: code shrinkDenys Vlasenko
function old new delta ifplugd_main 1161 1144 -17 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-09htpd: trivial simplification in random interval selectionDenys Vlasenko
function old new delta poll_interval 57 52 -5 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-07udhcpc: in comments, explain the kind of raw socket we createDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-03udhcpc: don't use BPF filter, users report problems (bugs 4598, 6746)Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-03ifupdown: support 'link' address familyKaarle Ritvanen
Does not configure anything. L2 configuration hook scripts should do their job on receiving ADDRFAM=link. Configuration will be done only once, irrespective of L3 protocols used. Using the 'link' family in the interfaces file conforms to the Debian implementation: http://sources.debian.net/src/ifupdown/0.7.47.1/link.defn function old new delta link_methods - 12 +12 addr_link - 12 +12 link_up_down - 6 +6 static.addr_fams 12 16 +4 ------------------------------------------------------------------------------ (add/remove: 3/0 grow/shrink: 1/0 up/down: 34/0) Total: 34 bytes Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>