Age | Commit message (Collapse) | Author |
|
function old new delta
send_arp_request - 185 +185
zcip_main 1273 1272 -1
pick_nip 40 - -40
arp 185 - -185
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 0/1 up/down: 185/-226) Total: -41 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
zcip_main 1263 1230 -33
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
zcip_main 1411 1263 -148
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
While RFC1035 recommends a label not to start with a number, there is
actually no such limitation in dns. One may buy a domain name like
0x1.net and use it.
This commit remove this check and allow a user to use such domains.
Signed-off-by: Arthur Gautier <baloo@gandi.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Introduce a library routine to package the idiom:
p = xmalloc(b, n);
memcpy(p, b, n);
and use it where possible. The example in traceroute used xzalloc
but it didn't need to.
function old new delta
xmemdup - 32 +32
last_main 834 826 -8
make_device 2321 2311 -10
common_traceroute_main 3698 3685 -13
readtoken1 3182 3168 -14
procps_scan 1222 1206 -16
forkchild 655 638 -17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/6 up/down: 32/-78) Total: -46 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This patch removes stray empty line from busybox code
reported by script find_stray_empty_lines
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Akhilesh Kumar <akhilesh.k@samsung.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Otherwise chroot() doesn't work for non-root
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Commit "zcip: fix link-local IP conflict detection" has introduced
wrong comparsion of source IP with our IP. This leads to a new IP
being picked unnecessarily on every incoming ARP packet.
Signed-off-by: Vladislav Grishenko <themiron@mail.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When 'if -a' runs into an failure on an interface all further
interfaces won't be correctly updated in ifstate. This patch
inserts a new variable that only tracks the current interfaces
failure so that the write to ifstate can rely on this and not
the one for the functions return value.
Fixes https://bugs.busybox.net/show_bug.cgi?id=6212
Signed-off-by: Frank Bergmann <frank.frajasalo@googlemail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
unix_do_one 548 540 -8
process_timer_stats 508 500 -8
process_irq_counts 532 524 -8
lpd_main 839 831 -8
hwclock_main 502 494 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/6 up/down: 0/-50) Total: -40 bytes
Signed-off-by: Ron Yorston <rmy@tigress.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
is_prefixed_with - 18 +18
complete_username 78 77 -1
man_main 737 735 -2
fsck_device 429 427 -2
unpack_ar_archive 80 76 -4
strip_unsafe_prefix 105 101 -4
singlemount 1054 1050 -4
rtc_adjtime_is_utc 90 86 -4
resolve_mount_spec 88 84 -4
parse_one_line 1029 1025 -4
parse_conf 1460 1456 -4
may_wakeup 83 79 -4
loadkmap_main 219 215 -4
get_irqs_from_stat 103 99 -4
get_header_cpio 913 909 -4
findfs_main 79 75 -4
fbsplash_main 1230 1226 -4
load_crontab 776 771 -5
expand_vars_to_list 1151 1146 -5
date_main 881 876 -5
skip_dev_pfx 30 24 -6
make_device 2199 2193 -6
complete_cmd_dir_file 773 767 -6
run_applet_and_exit 715 708 -7
uudecode_main 321 313 -8
pwdx_main 197 189 -8
execute 568 560 -8
i2cdetect_main 1186 1176 -10
procps_scan 1242 1230 -12
procps_read_smaps 1017 1005 -12
process_module 746 734 -12
patch_main 1903 1891 -12
nfsmount 3572 3560 -12
stack_machine 126 112 -14
process_timer_stats 449 435 -14
match_fstype 111 97 -14
do_ipaddr 1344 1330 -14
open_list_and_close 359 343 -16
get_header_tar 1795 1779 -16
prepend_new_eth_table 340 323 -17
fsck_main 1811 1794 -17
find_iface_state 56 38 -18
dnsd_main 1321 1303 -18
base_device 179 158 -21
find_keyword 104 82 -22
handle_incoming_and_exit 2785 2762 -23
parse_and_put_prompt 774 746 -28
modinfo 347 317 -30
find_action 204 171 -33
update_passwd 1470 1436 -34
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/49 up/down: 18/-540) Total: -522 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
arping: interface eth0 not found: No such device
^^^^
This is because error template is formed before parsing command line arguments,
so it always uses default interface name "eth0".
Signed-off-by: Alexander Korolkov <alexander.korolkov@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
wget_main 2551 2715 +164
wget_user_headers - 62 +62
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 226/0) Total: 226 bytes
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
rdate_main 246 251 +5
show_entry 291 287 -4
daytime_stream 44 39 -5
packed_usage 30176 30168 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 5/-17) Total: -12 bytes
text data bss dec hex filename
929453 932 17684 948069 e7765 busybox_old
929411 932 17684 948027 e773b busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Upstream route command shows non-up routes, it shows reject and nonexthop flags.
And we had "ref" and "use" values mixed up...
function old new delta
flagvals 32 44 +12
flagchars 9 12 +3
INET_setroute 767 768 +1
INET6_setroute 495 496 +1
set_flags 43 39 -4
flags_ipvx 16 8 -8
route_main 632 623 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/3 up/down: 17/-21) Total: -4 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Based on the patch by Zheng Junling <zhengjunling@huawei.com>
and Chen Gang <cg.chen@huawei.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
(re-sending this as it got ignored completey and the format of the
previous mail was probably not correct - please let me know if there's
anything else I can do to get this trivial fix applied)
for telnetd to work, we only need CONFIG_UNIX98_PTYS to be enabled
in the Linux kernel - DEVPTS_FS has been obsolete for some time
Signed-off-by: Martin Kaiser <lists@kaiser.cx>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This speeds up syncing - now happens only just
two replies from a peer. Especially useful for "ntpd -q".
Shouldn't have ill effects: if we chose a bad peer,
we will discover it later and switch to another one.
The code is even smaller this way.
Suggested by Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
We wanted to detect when tv_sec = unsigned1 - unsigned2
underflows by looking at tv_sec's sign. But if tv_sec
is long and it is wider than unsigned, we get unsigned -> long
conversion which is in this case never negative.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
update_utmp_DEAD_PROCESS - 17 +17
telnetd_main 1685 1674 -11
mark_terminated 56 45 -11
handle_sigchld 74 63 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
OpenNTPd is licensed under ISC-style license so it's good idea to keep
ntpd applet under same license to avoid mess, instead of having
our changes to be under GPL.
Names of original code's authors are added.
Signed-off-by: Adam Tkac <vonsch@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Prevent nasty surprises if script runs longer than lease time / 2.
Signed-off-by: John Schroeder <jschroed@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Based on the following user report:
I ran into an issue where I was seeing a long delay in the scripts called
in udhcp_run_script. I was using an old version of OpenWrt (kamikaze)
and a satellite modem. An NTP script was being called and the modem
would sometimes take a long time to respond to the DNS lookup when
it was offline.
This delay started affecting my lease time. The lease that I would
get from my satellite modem before it was online would be short:
only 60 seconds. The delay with NTP and the modem would typically
be about 18 seconds. This would cause the first DHCP renew request
from dhcpc to be a little late. Under certain circumstances,
I could even see the first DHCP renew to occur after the lease
had expired!
function old new delta
udhcpc_main 2816 2837 +21
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Busybox already uses sendfile in httpd. This patch proposes to use it
globally to copy data between file descriptors.
It speeds up the copying on slow systems a lot - below are the times needed
to copy a 450Mb file with and without this option enabled on a BeagleBone
Black:
sendfile:
user 0m0.000s
sys 0m8.170s
read/write 4k:
user 0m0.470s
sys 0m16.300s
function old new delta
bb_full_fd_action 394 474 +80
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
read_leases 269 328 +59
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
print_route 1797 1865 +68
do_iproute 2097 2112 +15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 83/0) Total: 83 bytes
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bb_logenv_override - 70 +70
packed_usage 29969 30033 +64
zcip_main 1426 1431 +5
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 2/0 up/down: 139/0) Total: 139 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
169.254 may already be used by a local network. This patch allows
specifying your own IP range.
Our particular use case is a mesh network, in which the nodes partaking
were using an IP range specifically assigned for the meshing purpose.
As the LAN side of the mesh node could use 169.254, this default range
was not an option.
function old new delta
zcip_main 1342 1426 +84
pick_nip - 40 +40
packed_usage 29974 29969 -5
pick 34 - -34
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 1/1 up/down: 124/-39) Total: 85 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Some clients have a very short timeout for sending the DHCP
DISCOVER, shorter than the arpping timeout of 2000 milliseconds
that udhcpd uses by default.
This patch allows tweaking the timeout, or disabling of arpping
altogether, at the risk of handing out addresses which are
already in use.
function old new delta
udhcpd_main 1460 1501 +41
udhcpc_main 2814 2851 +37
packed_usage 29957 29974 +17
arpping 477 493 +16
find_free_or_expired_nip 161 174 +13
send_offer 285 292 +7
nobody_responds_to_arp 85 89 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0) Total: 135 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The offset to jitter ratio is now calculated before updating
jitter to make the test more sensitive.
function old new delta
ntp_init 460 474 +14
update_local_clock 752 764 +12
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 26/0) Total: 26 bytes
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
To avoid polling servers frequently slowly increase the interval up
to BIGPOLL when
- no replies are received from a peer
- no source can be selected
- peer claims to be unsynchronized (e.g. we are polling it too
frequently)
When recv() returns with an error, drop code to try to continue
on network errors: I'm not convinced those cases happen in real life.
function old new delta
recv_and_process_peer_pkt 919 838 -81
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
* on step, poll interval drops to 8.5 mins instead of 32 seconds
* on total loss of all replies (no replies from any peer
for last 8 requests), also drop poll interval to 8.5 mins
instead of 32 seconds
* on send abd recv errors, RETRY_INTERVAL is now 32 seconds,
not 5 seconds
* on timing out listening to reply, instead of unconditional
shortening poll interval by x4, clamp it to NOREPLY_INTERVAL
(512 seconds)
* if a largish offset is seen, clamp nexp poll interval
to 128 seconds, not 64 seconds
function old new delta
clamp_pollexp_and_set_MAXSTRAT - 37 +37
recv_and_process_peer_pkt 861 869 +8
poll_interval 52 48 -4
update_local_clock 762 752 -10
ntpd_main 1063 1050 -13
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 45/-27) Total: 18 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The burst mode needs to be stopped even when no replies are received.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Some HP PA-RISC firmware always sends fixed 512-byte requests,
with trailing garbage.
function old new delta
tftpd_main 578 572 -6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
common_ping_main 1788 1831 +43
sendping6 56 82 +26
sendping4 82 108 +26
packed_usage 29959 29938 -21
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 95/-21) Total: 74 bytes
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
cmdio_get_cmd_and_arg - 237 +237
get_passwd - 97 +97
check_password - 82 +82
ftpd_main 2297 2178 -119
ask_and_check_password_extended 206 84 -122
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 0/2 up/down: 416/-241) Total: 175 bytes
Signed-off-by: Morten Kvistgaard <MK@pch-engineering.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|