aboutsummaryrefslogtreecommitdiff
path: root/shell/ash.c
AgeCommit message (Collapse)Author
2016-10-25ash: [EXPAND] Removed herefd hackDenys Vlasenko
Upstream commit: Date: Sun, 11 Nov 2007 15:00:06 +0800 [EXPAND] Removed herefd hack The herefd hack goes back more than a decade. it limits the amount of memory we have to allocate when expanding here-documents by writing the result out from time to time. However, it's no longer safe because the stack is used to place intermediate results too and there we certainly don't want to write them out should we be short on memory. In any case, with today's computers we can afford to keep the entire result in memory and write them out at the end. function old new delta redirect 1268 1264 -4 ash_main 1485 1478 -7 subevalvar 1157 1132 -25 growstackstr 54 24 -30 argstr 1192 1154 -38 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/5 up/down: 0/-104) Total: -104 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash: [SHELL] Move flushall to the point just before _exitDenys Vlasenko
Upstream commit: We need to flush at the very end in case we've generated any errors before that. The flushall call cannot perform a longjmp so it's safe there. Date: Sat, 22 Sep 2007 20:50:21 +0800 [SHELL] Move flushall to the point just before _exit We need to flush at the very end in case we've generated any errors before that. The flushall call cannot perform a longjmp so it's safe there. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash: [EVAL] Let funcnode refer to a function definition, not its first commandDenys Vlasenko
Upstream patch: Date: Tue, 15 Mar 2011 15:44:47 +0800 [EVAL] Let funcnode refer to a function definition, not its first command It is not unrelated: I changed the meaning of struct funcnode's field n to refer to the function definition, rather than the list of the function's commands, because I needed to refer to the function definition node from evalfun, which only gets passed a funcnode. But it is something that could be applied independently (without being useful by itself), so I've attached it as a separate patch for easier review. Signed-off-by: Harald van Dijk <harald@gigawatt.nl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash: [REDIR] Remove EMFILE special caseDenys Vlasenko
Upstream commit: Date: Sun, 6 May 2007 12:01:37 +1000 [REDIR] Remove EMFILE special case No caller of copyfd need to ignore EMFILE so we can remove the special case and just let it call sh_error on any error. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash: [EVAL] Check exit for eval NSUBSHELLDenys Vlasenko
Upstream commit: Date: Tue, 6 Jul 2010 17:50:37 +0800 [PATCH 161/277] [EVAL] Check exit for eval NSUBSHELL Example: $ dash -c 'set -e; (false); echo here' here With this commit, dash exits 1 before echo. The bug was reported by Stefan Fritsch through http://bugs.debian.org/514863 Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> This was fixed differently in our tree: Date: Fri Sep 16 19:04:02 2016 +0000 ash: exit after subshell error when errexit option is set When "set -e" option is on, shell must exit when any command fails, including compound commands of the form (compound-list) executed in a subshell. Bash and dash shells have this behaviour. Also add a corresponding testcase. Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash: add comment explaining "set -e; $(cmd)" discrepancyDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash: reduce code differences from upstreamDenys Vlasenko
Upstream commit: Date: Wed, 8 Sep 2010 16:21:52 +0800 [JOBS] Debug compile fix No point in tracing a no longer undeclared "ps->cmd", fixes: jobs.c: In function \u2018commandtext\u2019: jobs.c:1192: error: \u2018ps\u2019 undeclared (first use in this function) jobs.c:1192: error: (Each undeclared identifier is reported only once jobs.c:1192: error: for each function it appears in.) Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash: remove unused EXSHELLPROCDenys Vlasenko
Upstream commit: Date: Sun, 28 Nov 2010 20:47:07 +0800 [BUILTIN] Stop documenting EXSHELLPROC At some point between ash 0.3.5-11.0.1 and ash 0.3.8-37, Debian ash stopped using the EXSHELLPROC exception to handle shell scripts without a magic number. Remove all remaining references to it to avoid confusion. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash: [BUILTIN] Use EXEXIT in place of EXEXECDenys Vlasenko
Upstream commit: Date: Sun, 28 Nov 2010 20:44:37 +0800 [BUILTIN] Use EXEXIT in place of EXEXEC The intended semantics of EXEXEC are identical to EXEXIT, so simplify by using EXEXIT directly. Functional change: in edge cases (exec within a trap handler), this causes the exit status from exec not to be clobbered. For example, without this patch: $ sh -c 'trap "exec nonexistent" EXIT'; echo $? exec: 1: nonexistent: not found 0 And with it: $ sh -c 'trap "exec nonexistent" EXIT'; echo $? exec: 1: nonexistent: not found 127 Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-25ash,hush: set exit code 127 in "sh /does/not/exist" caseDenys Vlasenko
Upstream commit 1 for ash: [ERROR] Allow the originator of EXERROR to set the exit status Some errors have exit status values specified by POSIX and it is therefore desirable to be able to set the exit status at the EXERROR source rather than in main.c. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Upstream commit 2 for ash: [INPUT] Use exit status 127 when the script to run does not exist This commit makes dash exit with return code 127 instead of 2 if started as non-interactive shell with a non-existent command_file specified as argument (or a directory), as documented in http://www.opengroup.org/onlinepubs/009695399/utilities/sh.html#tag_04_128_14 The wrong exit code was reported by Clint Adams and Jari Aalto through http://bugs.debian.org/548743 http://bugs.debian.org/548687 Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> NB: in fact, http://bugs.debian.org/548687 was not fixed by this: "sh /dir/" thinks that EISDIR error on read is EOF, and exits 0. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-24ash: explain EXP_REDIR and why we (dont) glob redir filenamesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-24ash: return exit status of nofork appletsRon Yorston
The commit 'ash: eval: Return status in eval functions' changed how exit status is handled in eval functions. The case of nofork applets was missed, resulting in the incorrect status potentially being returned for nofork applets when FEATURE_SH_NOFORK is enabled. Signed-off-by: Ron Yorston <rmy@pobox.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-07ash: all blocks in function node copying must be SHELL_ALIGNedDenys Vlasenko
Previous commit probably introduced a bug: non-matching size calculation in size counting and actual copying caused by SHELL_ALIGN being applied differently! This won't bite if string sizes are also SHELL_ALIGNed. Thus fixing. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-07ash: get rid of two global data variablesDenys Vlasenko
function old new delta calcsize 126 147 +21 funcstring_end - 4 +4 sizenodelist 28 24 -4 funcstringsize 4 - -4 funcstring 4 - -4 funcblocksize 4 - -4 nodeckstrdup 48 39 -9 evaltree 828 788 -40 ------------------------------------------------------------------------------ (add/remove: 1/3 grow/shrink: 1/4 up/down: 25/-105) Total: -40 bytes text data bss dec hex filename 943376 916 14292 958584 ea078 busybox_old 943344 916 14284 958544 ea050 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-07ash: comment out free(p) just before _exit, tweak some outdated commentsDenys Vlasenko
Planned to sync exitshell up to dash, turned out ours is better :) Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02ash: [PARSER] Add nlprompt/nlnoprompt helpersDenys Vlasenko
Upstream commit: Date: Mon, 29 Sep 2014 22:53:53 +0800 [PARSER] Add nlprompt/nlnoprompt helpers This patch adds the nlprompt/nlnoprompt helpers to isolate code dealing with newlines and prompting. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02whitespace fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02sh: do not print empty line at the end of "help" outputDenys Vlasenko
It's pointless. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02ash: undo "tokname hack"Denys Vlasenko
dash has tokendlist[] array to decide which tokens end lists. We store it as first byte of each tokname_array[i]. Switch to bit array, name it like dash (tokendlist), drop special 1st byte of tokname_array[i]. This brings us closer to dash, and shrinks the binary, because many more string aliasing opportunities are now open: function old new delta pstrcmp1 - 16 +16 readtoken1 2852 2858 +6 list 326 327 +1 pstrcmp 16 15 -1 tokname 45 42 -3 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 2/2 up/down: 23/-4) Total: 19 bytes text data bss dec hex filename 943556 916 14292 958764 ea12c busybox_old 943463 916 14292 958671 ea0cf busybox_unstripped ^^^^^^^ note this! Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02ash: placate gcc: "warning: ! is only applied to the left hand side of =="Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02ash: fix globbing bugs when using glibc glob()Denys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02ash: style fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02ash: support "--" in "source" builtinDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02ash: expand: Fixed "$@" expansion when EXP_FULL is falseDenys Vlasenko
Upstream commit: Date: Thu, 1 Jan 2015 07:53:10 +1100 expand: Fixed "$@" expansion when EXP_FULL is false The commit 3c06acdac0b1ba0e0acdda513a57ee6e31385dce ([EXPAND] Split unquoted $@/$* correctly when IFS is set but empty) broke the case where $@ is in quotes and EXP_FULL is false. In that case we should still emit IFS as field splitting is not performed. Reported-by: Juergen Daubert <jue@jue.li> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-02test: memory leak: free group id listDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: fix return_in_trap1.tests failureDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: [EXPAND] Optimise nulonly away and just use quoted as beforeDenys Vlasenko
Upstream commit: Date: Wed, 8 Oct 2014 20:09:56 +0800 [EXPAND] Optimise nulonly away and just use quoted as before This patch makes a small optimisation by using the same value for quoted between evalvar and varvalue by eliminating nulonly and passing along quoted instead. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: [EXPAND] Do not split quoted VSLENGTH and VSTRIMDenys Vlasenko
Upstream patch: Date: Wed, 8 Oct 2014 15:42:08 +0800 [EXPAND] Do not split quoted VSLENGTH and VSTRIM Currently VSLENGTH and VSTRIM* are field-split even within quotes. This is obviously wrong. This patch fixes that. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: [EXPAND] Split unquoted $@/$* correctly when IFS is set but emptyDenys Vlasenko
Upstream commit: Date: Wed, 8 Oct 2014 15:24:23 +0800 [EXPAND] Split unquoted $@/$* correctly when IFS is set but empty Currently we do not field-split $@/$* when it isn't quoted and IFS is set but empty. This is obviously wrong. This patch fixes this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: fix "return N" not setting $? in loop conditionalsDenys Vlasenko
Upstream commit 1: Date: Mon, 6 Oct 2014 20:45:04 +0800 [EVAL] Move common skipcount logic into skiploop The functions evalloop and evalfor share the logic on checking and updating skipcount. This patch moves that into the helper function skiploop. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Upstream commit 2: Date: Mon, 6 Oct 2014 21:22:43 +0800 [BUILTIN] Allow return in loop conditional to set exit status https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=332954 When return is used in a loop conditional the exit status will be lost because we always set the exit status at the end of the loop to that of the last command executed in the body. This is counterintuitive and contrary to what most other shells do. This patch fixes this by always preserving the exit status of return when it is used in a loop conditional. The patch was originally written by Gerrit Pape <pape@smarden.org>. Reported-by: Stephane Chazelas <stephane_chazelas@yahoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: [ERROR] Set exitstatus in onintDenys Vlasenko
Partially backported this commit: Date: Thu, 2 Oct 2014 21:07:55 +0800 [ERROR] Set exitstatus in onint Currently the exit status when we receive SIGINT is set in evalcommand which means that it doesn't always get set. For example, if you press CTRL-C at the prompt of an interactive dash, the exit status is not set to 130 as it is in many other Bourne shells. This patch fixes this by moving the setting of the exit status into onint which also simplifies evalcommand. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> The part after "if (evalbltin(cmdentry.u.cmd, argc, argv, flags))" causes testsuite failures in signal handling, so left unchanged. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: [EVAL] Revert SKIPEVAL into EXEXITDenys Vlasenko
Upstream commit: Date: Tue Aug 11 20:56:53 2009 +1000 [EVAL] Revert SKIPEVAL into EXEXIT Now that eval handles EV_TESTED correctly, we can remove the SKIPEVAL hack and simply use EXEXIT for set -e. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: [EVAL] Pass EV_TESTED into evalcmdDenys Vlasenko
Upstream commit: Date: Tue Aug 11 20:48:15 2009 +1000 [EVAL] Pass EV_TESTED into evalcmd This patch fixes the case where the eval command is used with set -e and as part of a construct that should not cause the shell to abort, e.g., as part of the condition of an if statement. This is achieved by propagating the EV_TESTED flag into the evalstring function through evalcmd. As this alters the prototype of evalcmd it is now invoked explicitly by evalbltin. The built-in infrastructure has been changed to accomodate this special case. In order to ensure that the EXIT trap is properly executed this patch clears evalskip in exitshell. This wasn't needed before because of the broken way evalstring worked where it always clears evalskip when called by minusc. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Although, I failed to create a reproducer for this. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: fix a thinko in the last commitDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: make internal globbing code selectable from configDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-10-01ash: explain how "command" is handled, and shrink it a bitDenys Vlasenko
function old new delta getoptscmd 641 632 -9 commandcmd 79 69 -10 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-19) Total: -19 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-30ash: [VAR] Initialise OPTIND after importing environmentDenys Vlasenko
Upstream commit 1: Date: Fri, 23 Aug 2013 21:27:42 +1000 [VAR] Initialise OPTIND after importing environment On Sat, Mar 23, 2013 at 01:46:20AM +0000, Chris F.A. Johnson wrote: > According to both the dash man page and the POSIX spec, "When the > shell is invoked, OPTIND is initialized to 1." > > However, it actually takes the value of the environment variable > if it exists: > > $ OPTIND=4 dash -c 'echo "$OPTIND"' > 4 > $ OPTIND=4 bash -c 'echo "$OPTIND"' > 1 > $ OPTIND=4 ksh -c 'echo "$OPTIND"' > 1 > $ OPTIND=4 ksh93 -c 'echo "$OPTIND"' > 1 This patch fixes this by initialising OPTIND after importing the environment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Upstream commit 2: Date: Tue, 7 Oct 2014 22:24:42 +0800 [VAR] Use setvareq to set OPTIND initially There is no need to setvarint to set the initial value of OPTIND of one. This patch switchs to setvareq which also lets us avoid an unnecessary memory allocation. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-30ash: [BUILTIN] Merge SKIPFUNC/SKIPFILE and only clear SKIPFUNC when leaving ↵Denys Vlasenko
dotcmd Upstream commit: Date: Sat, 9 Jul 2011 22:05:22 +0800 [BUILTIN] Merge SKIPFUNC/SKIPFILE and only clear SKIPFUNC when leaving dotcmd Currently upon leaving a dotcmd the evalskip state is reset so if a continue/break statement is used within a dot script it would have no effect outside of the dot script. This is inconsistent with other shells. This patch is based on one by Jilles Tjoelker and only clears SKIPFUNC when leaving a dot script. As a result continue/break will remain in effect. It also merges SKIPFUNC/SKIPFILE as they have no practical difference. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-30ash: Avoid overflow for very long variable nameDenys Vlasenko
Upstream commit: Date: Tue, 3 Jul 2012 17:32:33 +0800 Avoid overflow for very long variable name Otherwise, this: $ perl -le 'print "v"x(2**31+1) ."=1"' | dash provokes integer overflow Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-30ash: [VAR] Sanitise environment variable names on entryDenys Vlasenko
Upstream commit: Date: Sat, 25 Feb 2012 15:35:18 +0800 [VAR] Sanitise environment variable names on entry On Tue, Feb 14, 2012 at 10:48:48AM +0000, harald@redhat.com wrote: > "export -p" prints all environment variables, without checking if the > environment variable is a valid dash variable name. > > IMHO, the only valid usecase for "export -p" is to eval the output. > > $ eval $(export -p); echo OK > OK > > Without this patch the following test does error out with: > > test.py: > import os > os.environ["test-test"]="test" > os.environ["test_test"]="test" > os.execv("./dash", [ './dash', '-c', 'eval $(export -p); echo OK' ]) > > $ python test.py > ./dash: 1: export: test-test: bad variable name > > Of course the results can be more evil, if the environment variable > name is crafted, that it injects valid shell code. This patch fixes the issue by sanitising all environment variable names upon entry into the shell. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-30ash: [EVAL] Avoid using undefined handlerDenys Vlasenko
Upstream commit: Date: Fri, 8 Jul 2011 16:41:24 +0800 [EVAL] Avoid using undefined handler * src/eval.c (evalbltin, evalfun): Set savehandler before calling setjmp with the possible "goto *done", where savehandler is used. Otherwise, clang warns that "Assigned value is garbage or undefined" at the point where "savehandler" is used on the RHS. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-30ash: remove dead stores and unused variablesDenys Vlasenko
Upstream commit 1: Date: Fri, 8 Jul 2011 16:12:20 +0800 [MEMALLOC] Avoid gcc warning: variable 'oldstackp' set but not used * src/memalloc.c (growstackblock): Remove declaration and set of set-but-not-used variable. Also remove a stray space-before-TAB. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Upstream commit 2: Date: Fri, 8 Jul 2011 16:16:11 +0800 [MEMALLOC] Avoid clang warning about dead store to "size" * src/memalloc.c (makestrspace): Remove dead store. Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-30ash: [MEMALLOC] Add pushstackmarkDenys Vlasenko
Upstream commit: Author: Herbert Xu <herbert@gondor.apana.org.au> Date: Sat Oct 6 00:45:52 2007 +0800 [MEMALLOC] Add pushstackmark This patch gets rid of the stack mark tracking hack by allocating a little bit of stack memory if we're at risk of planting a stack mark which may be grown later. To do this a new function pushstackmark is added which lets the user pick a bigger amount to allocate since some users do that anyway after setting a stack mark. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-29ash: fix arithmetic closing )) split by backslash-newlineDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-29ash: [PARSER] Handle backslash newlines properly after dollar signDenys Vlasenko
Fixes var_unbackslash1.tests failure. Upstream commit: [PARSER] Handle backslash newlines properly after dollar sign On Tue, Aug 26, 2014 at 12:34:42PM +0000, Eric Blake wrote: > On 08/26/2014 06:15 AM, Oleg Bulatov wrote: > > While playing with sh generators I found that dash and bash have different > > interpretations for <slash><newline> sequence. > > > > $ dash -c 'EDIT=xxx; echo $EDIT\ > >> OR' > > xxxOR > > Buggy. > > > > $ dash -c 'echo "$\ > > (pwd)"' > > $(pwd) > > > > Is it undefined behaviour in POSIX? > > No, it's well-defined, and dash is buggy. ... I agree. This patch should resolve this problem and similar ones affecting blackslash newlines after we encounter a dollar sign. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-29ash: input: Allow two consecutive calls to pungetcDenys Vlasenko
Upstream commit: input: Allow two consecutive calls to pungetc The commit ef91d3d6a4c39421fd3a391e02cd82f9f3aee4a8 ([PARSER] Handle backslash newlines properly after dollar sign) created cases where we make two consecutive calls to pungetc. As we don't explicitly support that there are corner cases where you end up with garbage input leading to undefined behaviour. This patch adds explicit support for two consecutive calls to pungetc. Reported-by: Jilles Tjoelker <jilles@stack.nl> Reported-by: Juergen Daubert <jue@jue.li> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> In bbox case, bashism >& may need two pungetc() too. function old new delta pgetc 514 555 +41 pushstring 114 144 +30 basepf 52 76 +24 popstring 134 151 +17 parse_command 1584 1585 +1 pungetc 12 9 -3 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 5/1 up/down: 113/-3) Total: 110 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-29ash: jobs: Don't attempt to access job table for job %0Denys Vlasenko
Upstream commit: jobs: Don't attempt to access job table for job %0 If job %0 is (mistakenly) specified, an out-of-bounds access to the jobtab occurs in function getjob() if num = 0: jp = jobtab + 0 - 1 Fix this by checking that the job number is larger than 0 before accessing the jobtab. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-29ash: [EVAL] Make eval with empty arguments return 0Denys Vlasenko
This is a backport of upstream commit: [EVAL] Make eval with empty arguments return 0 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-28ash: [EVAL] Fix use-after-free in dotrap/evalstringDenys Vlasenko
From upstream: [EVAL] Fix use-after-free in dotrap/evalstring The function dotrap calls evalstring using the stored trap string. If evalstring then unsets that exact trap string then we will end up using freed memory. This patch fixes it by making evalstring always duplicate the string before using it. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-09-28ash: Remove unused EV_BACKCMD flagDenys Vlasenko
The original ash defered forking commands in backquotes so builtins could be run in the same context as the shell. This behavior was controlled using the EV_BACKCMD to evaltree. Unfortunately, as Matthias Scheler noticed in 1999 (NetBSD PR/7814), the result was counterintuitive; for example, echo "`cd /`" would change the cwd. So ash 0.3.5 left out that optimization. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 21:21:23 +0000