aboutsummaryrefslogtreecommitdiff
path: root/shell
AgeCommit message (Collapse)Author
2005-07-20applyinf fix for:Paul Fox
0000155: variable expansion with braces in backticks in msh
2005-07-20applying fix from:Paul Fox
0000152: ash: quoting rules for local variables different to globals
2005-07-19applying:Paul Fox
0000054: Tab completing filenames in ash causes SEGV Simple tab completion operations cause busybox (ash) to access illegal addresses.
2005-05-07This one's from me. Fix ash "standalone shell".Rob Landley
If we exec /proc/self/exe and only fall back to /bin/busybox if /proc isn't there, then we have a reasonable chance of having the standalone shell work even if busybox isn't installed in /bin on the system in question. Still won't work in a chroot environment, but it's an improvement.
2005-03-04Shaun Jackman writes: Newlib uses both __getopt_initialized and optind to ↵Mike Frysinger
track initialization of getopt()
2005-02-10- no need to check if JOBS is defined. Config.in ensures it.Ned Ludd
2005-02-09- add ash read -t timeout support. initial code provided by Tim Yamin on ↵Ned Ludd
Oct/21/2004 on the busybox mailing list. Edited his code a little to keep syntax highlighers happy and make it optional when CONFIG_ASH_TIMEOUT is defined
2004-10-08Fix CONFIG_ASH_MATH_SUPPORT_64 so it actually worksEric Andersen
2004-10-08Hiroshi Ito writes:Eric Andersen
ash "unset OLDPWD; cd -" causes segmentation fault. ( OLDPWD is not set when sh is invoked from getty. ) patch against current CVS is attached.
2004-10-08egor duda writes:Eric Andersen
Hi! I've created a patch to busybox' build system to allow building it in separate tree in a manner similar to kbuild from kernel version 2.6. That is, one runs command like 'make O=/build/some/where/for/specific/target/and/options' and everything is built in this exact directory, provided that it exists. I understand that applyingc such invasive changes during 'release candidates' stage of development is at best unwise. So, i'm currently asking for comments about this patch, starting from whether such thing is needed at all to whether it coded properly. 'make check' should work now, and one make creates Makefile in build directory, so one can run 'make' in build directory after that. One possible caveat is that if we build in some directory other than source one, the source directory should be 'distclean'ed first. egor
2004-09-24Fix a typoGlenn L McGrath
2004-09-24A bit of extra explanation regarding STANDALONEEric Andersen
2004-09-08Patrick Huesmann noticed BusyBox would not link whenEric Andersen
CONFIG_FEATURE_COMMAND_EDITING was defined *and* CONFIG_FEATURE_COMMAND_TAB_COMPLETION was undefined. Vladimir N. Oleynik writes: Its declare always, also if CONFIG_FEATURE_COMMAND_TAB_COMPLETION undefined. Patch to CVS version attached. --w vodz
2004-09-02Jonas Holmberg from axis dot com writes:Eric Andersen
This patch makes msh handle variable expansion within backticks more correctly. Current behaviour (wrong): -------------------------- BusyBox v1.00-rc3 (2004.08.26-11:51+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. $ A='`echo hello`' $ echo $A `echo hello` $ echo `echo $A` hello $ New behaviour (correct): ------------------------ BusyBox v1.00-rc3 (2004.08.26-11:51+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. $ A='`echo hello`' $ echo $A `echo hello` $ echo `echo $A` `echo hello` $ The current behaviour (wrong according to standards) was actually my fault. msh handles backticks by executing a subshell (which makes it work on MMU-less systems). Executing a subshell makes it hard to only expand variables once in the parent. Therefore I export all variables that will be expanded within the backticks and let the subshell handle the expansion instead. The bug was found while searching for security leaks in CGI-scripts. Current behaviour of msh makes it easy to expand backticks by mistake in $QUERY_STRING. I recommend appling the patch before release of bb 1.00. /Jonas
2004-08-27Quiet a few warningsEric Andersen
2004-08-19Patch from Vladimir N. Oleynik:Eric Andersen
On Wed Aug 18, 2004 at 06:52:57PM +0800, Matt Johnston wrote: > I've come across some strange-seeming behaviour when running programs > under Busybox (1.0.0-rc3) ash. If the child process sets stdin to be > non-blocking and then exits, the parent ash will also exit. A quick strace > shows that a subsequent read() from stdin returns EAGAIN (as would be > expected): Thanks! Patch attached. --w vodz
2004-08-16Joe.C writes:Eric Andersen
This bug is in busybox 1.0.0-rc2. When using lash exec builtin with redirection, the opened file fd keep increasing. For example, please try the following command with lash. ls -al /proc/<lash pid>/fd exec /bin/sh 2>/dev/null ls -al /proc/<lash pid>/fd The last 'ls' command output will look like this. The fd number 4 shouldn't exist. lrwx------ 1 501 100 64 Aug 13 13:56 4 -> /dev/pts/5 l-wx------ 1 501 100 64 Aug 13 13:56 2 -> /dev/null lrwx------ 1 501 100 64 Aug 13 13:56 1 -> /dev/pts/5 lrwx------ 1 501 100 64 Aug 13 13:56 0 -> /dev/pts/5 dr-xr-xr-x 3 501 100 0 Aug 13 13:56 .. dr-x------ 2 501 100 0 Aug 13 13:56 . This one-line patch fix this problem by setting CLOEXEC flag for squirrel fd. Please apply. Joe.C
2004-08-06Patch from Tito to fix warnings about redifined functionions barrier and likely.Glenn L McGrath
2004-08-04Michael Leibow, MichaelLe at belkin.com writes:Eric Andersen
A question was posted a month ago by Mark Alamo to see if others had problems with sourcing subscripts within msh. We asked his firm to fix the msh.c bug he described because we didn't have enough time to do it ourselves. When msh.c is executing a compound statement and there is a . command to source another script file, msh.c will not execute the subscript until it's completed executing the rest of the compound statement. His example was this: Echo "Start" ; . ./subA; echo "mid" ; . ./subB ; echo "end" subA and subB execute AFTER end is printed in reverse order. The same is true if the sourced files are inside an if else fi, case esac, or any compound statement. Attached is a patch to msh.c. It fixes the problem. Cd to the root of your busybox tree and execute "patch -p1 < msh.c.patch" Unfortunately, I won't have more time to work on this so I hope that there aren't any problems! Michael Leibow Senior Software Engineer Belkin Corporation
2004-08-04Run msh through indentEric Andersen
2004-07-24Paul Whittaker writes:Eric Andersen
With job control enabled, ash fails to tcsetpgrp back to initialpgrp upon exit. exitshell() should call setjobctl(0) to do this. Context: I am using a lightweight menu system (replimenu[.sf.net]) on my console, which invokes "/bin/sh -i -c /bin/login", where /bin/sh and /bin/login are busybox applets. /bin/sh is ash, with CONFIG_ASH_JOB_CONTROL=y as the sole suboption. The shell of the user concerned (nobody) is also /bin/sh (ash). When the user /bin/sh exits (and thereby login and its parent sh), replimenu receives EIO when it tries to read from the terminal.
2004-07-21Patch from Jean Wolter, fixes compiler warning when ASH_ALIAS isGlenn L McGrath
disabled.
2004-06-25Fix compile error when math support disabled.Glenn L McGrath
2004-06-22Stupidity-1, Erik-0Eric Andersen
2004-06-22Bastian Blank notices a couple of int64_ts that should haveEric Andersen
been longs
2004-06-22Patch from Bastian Blank:Eric Andersen
The updated patch adds a config option to explicitely enable 64 bit arithmetic. Also it removes the arith prototype from libbb.h as it is not used outside of ash. Bastian this patch has been slightly modified by Erik for cleanliness.
2004-04-14Larry Doolittle writes:Eric Andersen
This is a bulk spelling fix patch against busybox-1.00-pre10. If anyone gets a corrupted copy (and cares), let me know and I will make alternate arrangements. Erik - please apply. Authors - please check that I didn't corrupt any meaning. Package importers - see if any of these changes should be passed to the upstream authors. I glossed over lots of sloppy capitalizations, missing apostrophes, mixed American/British spellings, and German-style compound words. What is "pretect redefined for test" in cmdedit.c? Good luck on the 1.00 release! - Larry
2004-04-12Wolfgang Denk writes:Eric Andersen
He, there is a bug in HUSH's handling of "if" / "elif" commands: $ if true > then > echo 1 > elif > true > then > echo 2 > elif > true > then > echo 3 > else > echo 4 > fi 1 2 3 $ The same bug exists in all versions of HUSH from BB v0.60.x up to and including v1.00-pre9. The attached patch fixes this: $ if true > then > echo 1 > elif > true > then > echo 2 > elif > true > then > echo 3 > else > echo 4 > fi 1 $ Best regards, Wolfgang Denk
2004-04-12Peter Milne writes:Eric Andersen
Just upgraded from 0.6 to 1.00-pre8 Dot command handling handled args correctly (same as bash) in 0.60, but failed in 1.00: I fixed this by reverting the dotcmd function back to previous 0.60 instantiation, please consider using the older version. Thanks Peter
2004-04-12Jamie Guinan writes:Eric Andersen
It looks like latest uClibc defines ARCH_HAS_MMU, but a few busybox files test UCLIBC_HAS_MMU, resulting in vfork() getting called instead of fork(), etc. Patch below. Only tested for lash. Cheers, -Jamie
2004-04-12Fix spelling. "sort of" is two words.Eric Andersen
2004-04-07Remove the CONFIG_FEATURE_SH_APPLETS_ALWAYS_WIN option. It was sortofEric Andersen
stupid and didn't work properly anyways.
2004-04-05Per suggestion by Pawel Sakowski, fix the dash_arith() prototypeEric Andersen
to return a long. We were needlessly truncating to an int.
2004-03-27s/fileno\(stdin\)/STDIN_FILENO/gEric Andersen
s/fileno\(stdout\)/STDOUT_FILENO/g
2004-03-16Patch from vodz to fix the dynamic vars patch, which I should notEric Andersen
have checked in. Vladimir writes: Your patch have many problem. 1. You always added + time(). This cannot reset RANDOM=value for debuging with replay sequential. 2. Hmm. I examine bash 2.04 source. This pseudorandom generator use low bits of counter value. You use high bits. This make bad pseudorandom values after have 0-value. For example, if + time() do remove, your generator always return 0 after first generate 0. 3. Memory leak per call. Use ash-unlike unecessary bb_strdup function. 4. Unsupport show last $RANDOM value for "set" and "export" command. 5. Bloat code. Busybox-unlike patch - added unstandart feature as default hardcode. Last patch attached. Erik, why you apply Paul patch with have 5-th point problem? :( Last patch have ash change xwrite() to fresh libbb/bb_full_write interfase (haved loop after EINTR). --w vodz
2004-03-15Remove trailing whitespace. Update copyright to include 2004.Eric Andersen
2004-03-12Fix some goofy formattingEric Andersen
2004-03-11Paul Mundt, lethal at linux-sh dot org writes:Eric Andersen
Here's a follow-up replacement to the patch I sent earlier, this adjusts some of the semantics of the dynamic variable setting. Namely, dynamic vars can hook a set handler (which RANDOM uses to adjust the seed). They'll only lose their dynamic status if they're unset. I've used the same approach that bash does to come up with the random number, mostly just for consistency. For example: $ echo $RANDOM 13759 $ echo $RANDOM 20057 $ echo $RANDOM 1502 $ export RANDOM=42 $ echo $RANDOM 24179 $ echo $RANDOM 2046 $ unset RANDOM $ echo $RANDOM $ export RANDOM=42 $ echo $RANDOM 42 $
2004-03-05Patch by Felipe Kellermann to fix a compiler compatability problemGlenn L McGrath
2004-02-22Vodz. last_patch_128Glenn L McGrath
- declare applet_using as static from applets.c - small correction to cmdedit, previous version cleared history after Ctrl-C - small spelling correction (by Friedrich Lobenstock)
2004-02-18Fix vstype[] to match VS* defines. Patch from OpenWrt by mbm.Manuel Novoa III
2004-02-10oops. Leave the default feature set enbled for now...Eric Andersen
2004-02-10Initial effort at disabling job control as wellEric Andersen
2004-02-10Support disabling pipe and redirect supportEric Andersen
2004-02-06Patch from vodz, based on bug report from Richard Kojedzinszky:Eric Andersen
Richard, >I have a problem, which I can reproduce now. I am using pre7 version of >busybox, and the tab completion works fine. I mean, with an empty command >line I press the TAB twice, and ash shows me the available commands. But >when i process the profile file below, as > $ . /etc/profile >then it stops working, and the double-tab lists the directories available >from the cwd, and not the commands. Has someone else meet this problem >before, or am i doing something wrong? > >This is my '/etc/profile': >- --- ># System profile > >PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin >export PATH >trap ":" INT QUIT TERM > >export PS1="\h \w # " Thanks. Patch attached. --w vodz
2004-02-04Vodz last_patch_125_2, this patch have: Glenn L McGrath
- synced with dash 0.4.21 - better handle trap "cmds..." SIGINT (strange, i make bad hack for ash and cmdedit, but this work only with this...) - may be haven`t problem with Ctrl-D
2004-01-25Fix compile error when tab completion disabledGlenn L McGrath
2004-01-22last_patch_124 from Vodz, fix an ash bug when alt-1 was pressed, debianGlenn L McGrath
bug #228915
2004-01-14Vodz last_patch_122, Check $PATH at runtime to fix tab completionGlenn L McGrath
2004-01-13Vodz last_patch_121, syncing with dash_0.4.19, reduce code size.Glenn L McGrath