From da929a95aace0e79fbc621af2ab03c76d74d5fcb Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Fri, 4 Jun 2010 20:10:51 +0200 Subject: mass renaming Kbuild -> Kbuild.src, Config.in -> Config.src Signed-off-by: Denys Vlasenko --- applets/Kbuild | 44 -- applets/Kbuild.src | 44 ++ archival/Config.in | 368 ----------- archival/Config.src | 368 +++++++++++ archival/Kbuild | 28 - archival/Kbuild.src | 28 + archival/libunarchive/Kbuild | 57 -- archival/libunarchive/Kbuild.src | 57 ++ console-tools/Config.in | 161 ----- console-tools/Config.src | 161 +++++ console-tools/Kbuild | 23 - console-tools/Kbuild.src | 23 + coreutils/libcoreutils/Kbuild | 12 - coreutils/libcoreutils/Kbuild.src | 12 + debianutils/Config.in | 84 --- debianutils/Config.src | 84 +++ debianutils/Kbuild | 12 - debianutils/Kbuild.src | 12 + e2fsprogs/Config.in | 68 -- e2fsprogs/Config.src | 68 ++ e2fsprogs/Kbuild | 13 - e2fsprogs/Kbuild.src | 13 + e2fsprogs/old_e2fsprogs/Config.in | 67 -- e2fsprogs/old_e2fsprogs/Config.src | 67 ++ e2fsprogs/old_e2fsprogs/Kbuild | 16 - e2fsprogs/old_e2fsprogs/Kbuild.src | 16 + e2fsprogs/old_e2fsprogs/blkid/Kbuild | 23 - e2fsprogs/old_e2fsprogs/blkid/Kbuild.src | 23 + e2fsprogs/old_e2fsprogs/e2p/Kbuild | 15 - e2fsprogs/old_e2fsprogs/e2p/Kbuild.src | 15 + e2fsprogs/old_e2fsprogs/ext2fs/Kbuild | 23 - e2fsprogs/old_e2fsprogs/ext2fs/Kbuild.src | 23 + e2fsprogs/old_e2fsprogs/uuid/Kbuild | 14 - e2fsprogs/old_e2fsprogs/uuid/Kbuild.src | 14 + editors/Config.in | 199 ------ editors/Config.src | 199 ++++++ editors/Kbuild | 14 - editors/Kbuild.src | 14 + init/Config.in | 137 ---- init/Config.src | 137 ++++ init/Kbuild | 11 - init/Kbuild.src | 11 + libbb/Config.in | 176 ----- libbb/Config.src | 176 +++++ libbb/Kbuild | 172 ----- libbb/Kbuild.src | 172 +++++ libpwdgrp/Kbuild | 9 - libpwdgrp/Kbuild.src | 9 + loginutils/Config.in | 303 --------- loginutils/Config.src | 303 +++++++++ loginutils/Kbuild | 19 - loginutils/Kbuild.src | 19 + mailutils/Config.in | 53 -- mailutils/Config.src | 53 ++ mailutils/Kbuild | 11 - mailutils/Kbuild.src | 11 + miscutils/Config.in | 650 ------------------ miscutils/Config.src | 650 ++++++++++++++++++ miscutils/Kbuild | 48 -- miscutils/Kbuild.src | 48 ++ modutils/Config.in | 242 ------- modutils/Config.src | 242 +++++++ modutils/Kbuild | 14 - modutils/Kbuild.src | 14 + networking/Config.in | 1020 ----------------------------- networking/Config.src | 1020 +++++++++++++++++++++++++++++ networking/Kbuild | 48 -- networking/Kbuild.src | 48 ++ networking/libiproute/Kbuild | 64 -- networking/libiproute/Kbuild.src | 64 ++ networking/udhcp/Config.in | 128 ---- networking/udhcp/Config.src | 128 ++++ networking/udhcp/Kbuild | 19 - networking/udhcp/Kbuild.src | 19 + printutils/Config.in | 26 - printutils/Config.src | 26 + printutils/Kbuild | 9 - printutils/Kbuild.src | 9 + procps/Config.in | 213 ------ procps/Config.src | 213 ++++++ procps/Kbuild | 21 - procps/Kbuild.src | 21 + runit/Config.in | 83 --- runit/Config.src | 83 +++ runit/Kbuild | 17 - runit/Kbuild.src | 17 + scripts/Kbuild | 7 - scripts/Kbuild.src | 7 + selinux/Config.in | 123 ---- selinux/Config.src | 123 ++++ selinux/Kbuild | 20 - selinux/Kbuild.src | 20 + shell/Config.in | 396 ----------- shell/Config.src | 396 +++++++++++ shell/Kbuild | 14 - shell/Kbuild.src | 14 + sysklogd/Config.in | 128 ---- sysklogd/Config.src | 128 ++++ sysklogd/Kbuild | 11 - sysklogd/Kbuild.src | 11 + util-linux/Config.in | 940 -------------------------- util-linux/Config.src | 940 ++++++++++++++++++++++++++ util-linux/Kbuild | 45 -- util-linux/Kbuild.src | 45 ++ util-linux/volume_id/Kbuild | 43 -- util-linux/volume_id/Kbuild.src | 43 ++ 106 files changed, 6461 insertions(+), 6461 deletions(-) delete mode 100644 applets/Kbuild create mode 100644 applets/Kbuild.src delete mode 100644 archival/Config.in create mode 100644 archival/Config.src delete mode 100644 archival/Kbuild create mode 100644 archival/Kbuild.src delete mode 100644 archival/libunarchive/Kbuild create mode 100644 archival/libunarchive/Kbuild.src delete mode 100644 console-tools/Config.in create mode 100644 console-tools/Config.src delete mode 100644 console-tools/Kbuild create mode 100644 console-tools/Kbuild.src delete mode 100644 coreutils/libcoreutils/Kbuild create mode 100644 coreutils/libcoreutils/Kbuild.src delete mode 100644 debianutils/Config.in create mode 100644 debianutils/Config.src delete mode 100644 debianutils/Kbuild create mode 100644 debianutils/Kbuild.src delete mode 100644 e2fsprogs/Config.in create mode 100644 e2fsprogs/Config.src delete mode 100644 e2fsprogs/Kbuild create mode 100644 e2fsprogs/Kbuild.src delete mode 100644 e2fsprogs/old_e2fsprogs/Config.in create mode 100644 e2fsprogs/old_e2fsprogs/Config.src delete mode 100644 e2fsprogs/old_e2fsprogs/Kbuild create mode 100644 e2fsprogs/old_e2fsprogs/Kbuild.src delete mode 100644 e2fsprogs/old_e2fsprogs/blkid/Kbuild create mode 100644 e2fsprogs/old_e2fsprogs/blkid/Kbuild.src delete mode 100644 e2fsprogs/old_e2fsprogs/e2p/Kbuild create mode 100644 e2fsprogs/old_e2fsprogs/e2p/Kbuild.src delete mode 100644 e2fsprogs/old_e2fsprogs/ext2fs/Kbuild create mode 100644 e2fsprogs/old_e2fsprogs/ext2fs/Kbuild.src delete mode 100644 e2fsprogs/old_e2fsprogs/uuid/Kbuild create mode 100644 e2fsprogs/old_e2fsprogs/uuid/Kbuild.src delete mode 100644 editors/Config.in create mode 100644 editors/Config.src delete mode 100644 editors/Kbuild create mode 100644 editors/Kbuild.src delete mode 100644 init/Config.in create mode 100644 init/Config.src delete mode 100644 init/Kbuild create mode 100644 init/Kbuild.src delete mode 100644 libbb/Config.in create mode 100644 libbb/Config.src delete mode 100644 libbb/Kbuild create mode 100644 libbb/Kbuild.src delete mode 100644 libpwdgrp/Kbuild create mode 100644 libpwdgrp/Kbuild.src delete mode 100644 loginutils/Config.in create mode 100644 loginutils/Config.src delete mode 100644 loginutils/Kbuild create mode 100644 loginutils/Kbuild.src delete mode 100644 mailutils/Config.in create mode 100644 mailutils/Config.src delete mode 100644 mailutils/Kbuild create mode 100644 mailutils/Kbuild.src delete mode 100644 miscutils/Config.in create mode 100644 miscutils/Config.src delete mode 100644 miscutils/Kbuild create mode 100644 miscutils/Kbuild.src delete mode 100644 modutils/Config.in create mode 100644 modutils/Config.src delete mode 100644 modutils/Kbuild create mode 100644 modutils/Kbuild.src delete mode 100644 networking/Config.in create mode 100644 networking/Config.src delete mode 100644 networking/Kbuild create mode 100644 networking/Kbuild.src delete mode 100644 networking/libiproute/Kbuild create mode 100644 networking/libiproute/Kbuild.src delete mode 100644 networking/udhcp/Config.in create mode 100644 networking/udhcp/Config.src delete mode 100644 networking/udhcp/Kbuild create mode 100644 networking/udhcp/Kbuild.src delete mode 100644 printutils/Config.in create mode 100644 printutils/Config.src delete mode 100644 printutils/Kbuild create mode 100644 printutils/Kbuild.src delete mode 100644 procps/Config.in create mode 100644 procps/Config.src delete mode 100644 procps/Kbuild create mode 100644 procps/Kbuild.src delete mode 100644 runit/Config.in create mode 100644 runit/Config.src delete mode 100644 runit/Kbuild create mode 100644 runit/Kbuild.src delete mode 100644 scripts/Kbuild create mode 100644 scripts/Kbuild.src delete mode 100644 selinux/Config.in create mode 100644 selinux/Config.src delete mode 100644 selinux/Kbuild create mode 100644 selinux/Kbuild.src delete mode 100644 shell/Config.in create mode 100644 shell/Config.src delete mode 100644 shell/Kbuild create mode 100644 shell/Kbuild.src delete mode 100644 sysklogd/Config.in create mode 100644 sysklogd/Config.src delete mode 100644 sysklogd/Kbuild create mode 100644 sysklogd/Kbuild.src delete mode 100644 util-linux/Config.in create mode 100644 util-linux/Config.src delete mode 100644 util-linux/Kbuild create mode 100644 util-linux/Kbuild.src delete mode 100644 util-linux/volume_id/Kbuild create mode 100644 util-linux/volume_id/Kbuild.src diff --git a/applets/Kbuild b/applets/Kbuild deleted file mode 100644 index a6b0cf6fb..000000000 --- a/applets/Kbuild +++ /dev/null @@ -1,44 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -obj-y := -obj-y += applets.o - -hostprogs-y:= -hostprogs-y += usage usage_pod applet_tables - -always:= $(hostprogs-y) - -# Generated files need additional love - -# This trick decreases amount of rebuilds -# if tree is merely renamed/copied -ifeq ($(srctree),$(objtree)) -srctree_slash = -else -srctree_slash = $(srctree)/ -endif - -HOSTCFLAGS_usage.o = -I$(srctree_slash)include -Iinclude -HOSTCFLAGS_usage_pod.o = -I$(srctree_slash)include -Iinclude - -applets/applets.o: include/usage_compressed.h include/applet_tables.h - -applets/applet_tables: .config $(srctree_slash)include/applets.h -applets/usage: .config $(srctree_slash)include/applets.h -applets/usage_pod: .config include/applet_tables.h $(srctree_slash)include/applets.h - -quiet_cmd_gen_usage_compressed = GEN include/usage_compressed.h - cmd_gen_usage_compressed = $(srctree_slash)applets/usage_compressed include/usage_compressed.h applets - -include/usage_compressed.h: applets/usage $(srctree_slash)applets/usage_compressed - $(call cmd,gen_usage_compressed) - -quiet_cmd_gen_applet_tables = GEN include/applet_tables.h - cmd_gen_applet_tables = applets/applet_tables include/applet_tables.h - -include/applet_tables.h: applets/applet_tables - $(call cmd,gen_applet_tables) diff --git a/applets/Kbuild.src b/applets/Kbuild.src new file mode 100644 index 000000000..a6b0cf6fb --- /dev/null +++ b/applets/Kbuild.src @@ -0,0 +1,44 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +obj-y := +obj-y += applets.o + +hostprogs-y:= +hostprogs-y += usage usage_pod applet_tables + +always:= $(hostprogs-y) + +# Generated files need additional love + +# This trick decreases amount of rebuilds +# if tree is merely renamed/copied +ifeq ($(srctree),$(objtree)) +srctree_slash = +else +srctree_slash = $(srctree)/ +endif + +HOSTCFLAGS_usage.o = -I$(srctree_slash)include -Iinclude +HOSTCFLAGS_usage_pod.o = -I$(srctree_slash)include -Iinclude + +applets/applets.o: include/usage_compressed.h include/applet_tables.h + +applets/applet_tables: .config $(srctree_slash)include/applets.h +applets/usage: .config $(srctree_slash)include/applets.h +applets/usage_pod: .config include/applet_tables.h $(srctree_slash)include/applets.h + +quiet_cmd_gen_usage_compressed = GEN include/usage_compressed.h + cmd_gen_usage_compressed = $(srctree_slash)applets/usage_compressed include/usage_compressed.h applets + +include/usage_compressed.h: applets/usage $(srctree_slash)applets/usage_compressed + $(call cmd,gen_usage_compressed) + +quiet_cmd_gen_applet_tables = GEN include/applet_tables.h + cmd_gen_applet_tables = applets/applet_tables include/applet_tables.h + +include/applet_tables.h: applets/applet_tables + $(call cmd,gen_applet_tables) diff --git a/archival/Config.in b/archival/Config.in deleted file mode 100644 index 4f762e860..000000000 --- a/archival/Config.in +++ /dev/null @@ -1,368 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Archival Utilities" - -config FEATURE_SEAMLESS_XZ - bool "Make tar, rpm, modprobe etc understand .xz data" - default n - help - Make tar, rpm, modprobe etc understand .xz data. - -config FEATURE_SEAMLESS_LZMA - bool "Make tar, rpm, modprobe etc understand .lzma data" - default n - help - Make tar, rpm, modprobe etc understand .lzma data. - -config FEATURE_SEAMLESS_BZ2 - bool "Make tar, rpm, modprobe etc understand .bz2 data" - default n - help - Make tar, rpm, modprobe etc understand .bz2 data. - -config FEATURE_SEAMLESS_GZ - bool "Make tar, rpm, modprobe etc understand .gz data" - default n - help - Make tar, rpm, modprobe etc understand .gz data. - -config FEATURE_SEAMLESS_Z - bool "Make tar and gunzip understand .Z data" - default n - help - Make tar and gunzip understand .Z data. - -config AR - bool "ar" - default n - help - ar is an archival utility program used to create, modify, and - extract contents from archives. An archive is a single file holding - a collection of other files in a structure that makes it possible to - retrieve the original individual files (called archive members). - The original files' contents, mode (permissions), timestamp, owner, - and group are preserved in the archive, and can be restored on - extraction. - - The stored filename is limited to 15 characters. (for more information - see long filename support). - ar has 60 bytes of overheads for every stored file. - - This implementation of ar can extract archives, it cannot create or - modify them. - On an x86 system, the ar applet adds about 1K. - - Unless you have a specific application which requires ar, you should - probably say N here. - -config FEATURE_AR_LONG_FILENAMES - bool "Support for long filenames (not needed for debs)" - default n - depends on AR - help - By default the ar format can only store the first 15 characters - of the filename, this option removes that limitation. - It supports the GNU ar long filename method which moves multiple long - filenames into a the data section of a new ar entry. - -config FEATURE_AR_CREATE - bool "Support archive creation" - default n - depends on AR - help - This enables archive creation (-c and -r) with busybox ar. - -config BUNZIP2 - bool "bunzip2" - default n - help - bunzip2 is a compression utility using the Burrows-Wheeler block - sorting text compression algorithm, and Huffman coding. Compression - is generally considerably better than that achieved by more - conventional LZ77/LZ78-based compressors, and approaches the - performance of the PPM family of statistical compressors. - - Unless you have a specific application which requires bunzip2, you - should probably say N here. - -config BZIP2 - bool "bzip2" - default n - help - bzip2 is a compression utility using the Burrows-Wheeler block - sorting text compression algorithm, and Huffman coding. Compression - is generally considerably better than that achieved by more - conventional LZ77/LZ78-based compressors, and approaches the - performance of the PPM family of statistical compressors. - - Unless you have a specific application which requires bzip2, you - should probably say N here. - -config CPIO - bool "cpio" - default n - help - cpio is an archival utility program used to create, modify, and - extract contents from archives. - cpio has 110 bytes of overheads for every stored file. - - This implementation of cpio can extract cpio archives created in the - "newc" or "crc" format, it cannot create or modify them. - - Unless you have a specific application which requires cpio, you - should probably say N here. - -config FEATURE_CPIO_O - bool "Support for archive creation" - default n - depends on CPIO - help - This implementation of cpio can create cpio archives in the "newc" - format only. - -config FEATURE_CPIO_P - bool "Support for passthrough mode" - default n - depends on FEATURE_CPIO_O - help - Passthrough mode. Rarely used. - -config DPKG - bool "dpkg" - default n - select FEATURE_SEAMLESS_GZ - help - dpkg is a medium-level tool to install, build, remove and manage - Debian packages. - - This implementation of dpkg has a number of limitations, - you should use the official dpkg if possible. - -config DPKG_DEB - bool "dpkg_deb" - default n - select FEATURE_SEAMLESS_GZ - help - dpkg-deb unpacks and provides information about Debian archives. - - This implementation of dpkg-deb cannot pack archives. - - Unless you have a specific application which requires dpkg-deb, - say N here. - -config FEATURE_DPKG_DEB_EXTRACT_ONLY - bool "Extract only (-x)" - default n - depends on DPKG_DEB - help - This reduces dpkg-deb to the equivalent of - "ar -p data.tar.gz | tar -zx". However it saves space as none - of the extra dpkg-deb, ar or tar options are needed, they are linked - to internally. - -config GUNZIP - bool "gunzip" - default n - help - gunzip is used to decompress archives created by gzip. - You can use the `-t' option to test the integrity of - an archive, without decompressing it. - -config GZIP - bool "gzip" - default n - help - gzip is used to compress files. - It's probably the most widely used UNIX compression program. - -config FEATURE_GZIP_LONG_OPTIONS - bool "Enable long options" - default n - depends on GZIP && LONG_OPTS - help - Enable use of long options, increases size by about 106 Bytes - -config LZOP - bool "lzop" - default n - help - Lzop compression/decompresion. - -config LZOP_COMPR_HIGH - bool "lzop complession levels 7,8,9 (not very useful)" - default n - depends on LZOP - help - High levels (7,8,9) of lzop compression. These levels - are actually slower than gzip at equivalent compression ratios - and take up 3.2K of code. - -config RPM2CPIO - bool "rpm2cpio" - default n - help - Converts an RPM file into a CPIO archive. - -config RPM - bool "rpm" - default n - help - Mini RPM applet - queries and extracts RPM packages. - -config TAR - bool "tar" - default n - help - tar is an archiving program. It's commonly used with gzip to - create compressed archives. It's probably the most widely used - UNIX archive program. - -config FEATURE_TAR_CREATE - bool "Enable archive creation" - default y - depends on TAR - help - If you enable this option you'll be able to create - tar archives using the `-c' option. - -config FEATURE_TAR_AUTODETECT - bool "Autodetect compressed tarballs" - default n - depends on TAR && (FEATURE_SEAMLESS_Z || FEATURE_SEAMLESS_GZ || FEATURE_SEAMLESS_BZ2 || FEATURE_SEAMLESS_LZMA || FEATURE_SEAMLESS_XZ) - help - With this option tar can automatically detect compressed - tarballs. Currently it works only on files (not pipes etc). - -config FEATURE_TAR_FROM - bool "Enable -X (exclude from) and -T (include from) options)" - default n - depends on TAR - help - If you enable this option you'll be able to specify - a list of files to include or exclude from an archive. - -config FEATURE_TAR_OLDGNU_COMPATIBILITY - bool "Support for old tar header format" - default N - depends on TAR || DPKG - help - This option is required to unpack archives created in - the old GNU format; help to kill this old format by - repacking your ancient archives with the new format. - -config FEATURE_TAR_OLDSUN_COMPATIBILITY - bool "Enable untarring of tarballs with checksums produced by buggy Sun tar" - default N - depends on TAR || DPKG - help - This option is required to unpack archives created by some old - version of Sun's tar (it was calculating checksum using signed - arithmetic). It is said to be fixed in newer Sun tar, but "old" - tarballs still exist. - -config FEATURE_TAR_GNU_EXTENSIONS - bool "Support for GNU tar extensions (long filenames)" - default y - depends on TAR || DPKG - help - With this option busybox supports GNU long filenames and - linknames. - -config FEATURE_TAR_LONG_OPTIONS - bool "Enable long options" - default n - depends on TAR && LONG_OPTS - help - Enable use of long options, increases size by about 400 Bytes - -config FEATURE_TAR_UNAME_GNAME - bool "Enable use of user and group names" - default n - depends on TAR - help - Enables use of user and group names in tar. This affects contents - listings (-t) and preserving permissions when unpacking (-p). - +200 bytes. - -config FEATURE_TAR_NOPRESERVE_TIME - bool "Enable -m (do not preserve time) option" - default n - depends on TAR - help - With this option busybox supports GNU tar -m - (do not preserve time) option. - -config FEATURE_TAR_SELINUX - bool "Support for extracting SELinux labels" - default n - depends on TAR && SELINUX - help - With this option busybox supports restoring SELinux labels - when extracting files from tar archives. - -config UNCOMPRESS - bool "uncompress" - default n - help - uncompress is used to decompress archives created by compress. - Not much used anymore, replaced by gzip/gunzip. - -config UNLZMA - bool "unlzma" - default n - help - unlzma is a compression utility using the Lempel-Ziv-Markov chain - compression algorithm, and range coding. Compression - is generally considerably better than that achieved by the bzip2 - compressors. - - The BusyBox unlzma applet is limited to de-compression only. - On an x86 system, this applet adds about 4K. - - Unless you have a specific application which requires unlzma, you - should probably say N here. - -config FEATURE_LZMA_FAST - bool "Optimize unlzma for speed" - default n - depends on UNLZMA - help - This option reduces decompression time by about 25% at the cost of - a 1K bigger binary. - -config LZMA - bool "Provide lzma alias which supports only unpacking" - default n - depends on UNLZMA - help - Enable this option if you want commands like "lzma -d" to work. - IOW: you'll get lzma applet, but it will always require -d option. - -config UNXZ - bool "unxz" - default n - help - unxz is a unlzma successor. - -config XZ - bool "Provide xz alias which supports only unpacking" - default n - depends on UNXZ - help - Enable this option if you want commands like "xz -d" to work. - IOW: you'll get xz applet, but it will always require -d option. - -config UNZIP - bool "unzip" - default n - help - unzip will list or extract files from a ZIP archive, - commonly found on DOS/WIN systems. The default behavior - (with no options) is to extract the archive into the - current directory. Use the `-d' option to extract to a - directory of your choice. - -endmenu diff --git a/archival/Config.src b/archival/Config.src new file mode 100644 index 000000000..4f762e860 --- /dev/null +++ b/archival/Config.src @@ -0,0 +1,368 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Archival Utilities" + +config FEATURE_SEAMLESS_XZ + bool "Make tar, rpm, modprobe etc understand .xz data" + default n + help + Make tar, rpm, modprobe etc understand .xz data. + +config FEATURE_SEAMLESS_LZMA + bool "Make tar, rpm, modprobe etc understand .lzma data" + default n + help + Make tar, rpm, modprobe etc understand .lzma data. + +config FEATURE_SEAMLESS_BZ2 + bool "Make tar, rpm, modprobe etc understand .bz2 data" + default n + help + Make tar, rpm, modprobe etc understand .bz2 data. + +config FEATURE_SEAMLESS_GZ + bool "Make tar, rpm, modprobe etc understand .gz data" + default n + help + Make tar, rpm, modprobe etc understand .gz data. + +config FEATURE_SEAMLESS_Z + bool "Make tar and gunzip understand .Z data" + default n + help + Make tar and gunzip understand .Z data. + +config AR + bool "ar" + default n + help + ar is an archival utility program used to create, modify, and + extract contents from archives. An archive is a single file holding + a collection of other files in a structure that makes it possible to + retrieve the original individual files (called archive members). + The original files' contents, mode (permissions), timestamp, owner, + and group are preserved in the archive, and can be restored on + extraction. + + The stored filename is limited to 15 characters. (for more information + see long filename support). + ar has 60 bytes of overheads for every stored file. + + This implementation of ar can extract archives, it cannot create or + modify them. + On an x86 system, the ar applet adds about 1K. + + Unless you have a specific application which requires ar, you should + probably say N here. + +config FEATURE_AR_LONG_FILENAMES + bool "Support for long filenames (not needed for debs)" + default n + depends on AR + help + By default the ar format can only store the first 15 characters + of the filename, this option removes that limitation. + It supports the GNU ar long filename method which moves multiple long + filenames into a the data section of a new ar entry. + +config FEATURE_AR_CREATE + bool "Support archive creation" + default n + depends on AR + help + This enables archive creation (-c and -r) with busybox ar. + +config BUNZIP2 + bool "bunzip2" + default n + help + bunzip2 is a compression utility using the Burrows-Wheeler block + sorting text compression algorithm, and Huffman coding. Compression + is generally considerably better than that achieved by more + conventional LZ77/LZ78-based compressors, and approaches the + performance of the PPM family of statistical compressors. + + Unless you have a specific application which requires bunzip2, you + should probably say N here. + +config BZIP2 + bool "bzip2" + default n + help + bzip2 is a compression utility using the Burrows-Wheeler block + sorting text compression algorithm, and Huffman coding. Compression + is generally considerably better than that achieved by more + conventional LZ77/LZ78-based compressors, and approaches the + performance of the PPM family of statistical compressors. + + Unless you have a specific application which requires bzip2, you + should probably say N here. + +config CPIO + bool "cpio" + default n + help + cpio is an archival utility program used to create, modify, and + extract contents from archives. + cpio has 110 bytes of overheads for every stored file. + + This implementation of cpio can extract cpio archives created in the + "newc" or "crc" format, it cannot create or modify them. + + Unless you have a specific application which requires cpio, you + should probably say N here. + +config FEATURE_CPIO_O + bool "Support for archive creation" + default n + depends on CPIO + help + This implementation of cpio can create cpio archives in the "newc" + format only. + +config FEATURE_CPIO_P + bool "Support for passthrough mode" + default n + depends on FEATURE_CPIO_O + help + Passthrough mode. Rarely used. + +config DPKG + bool "dpkg" + default n + select FEATURE_SEAMLESS_GZ + help + dpkg is a medium-level tool to install, build, remove and manage + Debian packages. + + This implementation of dpkg has a number of limitations, + you should use the official dpkg if possible. + +config DPKG_DEB + bool "dpkg_deb" + default n + select FEATURE_SEAMLESS_GZ + help + dpkg-deb unpacks and provides information about Debian archives. + + This implementation of dpkg-deb cannot pack archives. + + Unless you have a specific application which requires dpkg-deb, + say N here. + +config FEATURE_DPKG_DEB_EXTRACT_ONLY + bool "Extract only (-x)" + default n + depends on DPKG_DEB + help + This reduces dpkg-deb to the equivalent of + "ar -p data.tar.gz | tar -zx". However it saves space as none + of the extra dpkg-deb, ar or tar options are needed, they are linked + to internally. + +config GUNZIP + bool "gunzip" + default n + help + gunzip is used to decompress archives created by gzip. + You can use the `-t' option to test the integrity of + an archive, without decompressing it. + +config GZIP + bool "gzip" + default n + help + gzip is used to compress files. + It's probably the most widely used UNIX compression program. + +config FEATURE_GZIP_LONG_OPTIONS + bool "Enable long options" + default n + depends on GZIP && LONG_OPTS + help + Enable use of long options, increases size by about 106 Bytes + +config LZOP + bool "lzop" + default n + help + Lzop compression/decompresion. + +config LZOP_COMPR_HIGH + bool "lzop complession levels 7,8,9 (not very useful)" + default n + depends on LZOP + help + High levels (7,8,9) of lzop compression. These levels + are actually slower than gzip at equivalent compression ratios + and take up 3.2K of code. + +config RPM2CPIO + bool "rpm2cpio" + default n + help + Converts an RPM file into a CPIO archive. + +config RPM + bool "rpm" + default n + help + Mini RPM applet - queries and extracts RPM packages. + +config TAR + bool "tar" + default n + help + tar is an archiving program. It's commonly used with gzip to + create compressed archives. It's probably the most widely used + UNIX archive program. + +config FEATURE_TAR_CREATE + bool "Enable archive creation" + default y + depends on TAR + help + If you enable this option you'll be able to create + tar archives using the `-c' option. + +config FEATURE_TAR_AUTODETECT + bool "Autodetect compressed tarballs" + default n + depends on TAR && (FEATURE_SEAMLESS_Z || FEATURE_SEAMLESS_GZ || FEATURE_SEAMLESS_BZ2 || FEATURE_SEAMLESS_LZMA || FEATURE_SEAMLESS_XZ) + help + With this option tar can automatically detect compressed + tarballs. Currently it works only on files (not pipes etc). + +config FEATURE_TAR_FROM + bool "Enable -X (exclude from) and -T (include from) options)" + default n + depends on TAR + help + If you enable this option you'll be able to specify + a list of files to include or exclude from an archive. + +config FEATURE_TAR_OLDGNU_COMPATIBILITY + bool "Support for old tar header format" + default N + depends on TAR || DPKG + help + This option is required to unpack archives created in + the old GNU format; help to kill this old format by + repacking your ancient archives with the new format. + +config FEATURE_TAR_OLDSUN_COMPATIBILITY + bool "Enable untarring of tarballs with checksums produced by buggy Sun tar" + default N + depends on TAR || DPKG + help + This option is required to unpack archives created by some old + version of Sun's tar (it was calculating checksum using signed + arithmetic). It is said to be fixed in newer Sun tar, but "old" + tarballs still exist. + +config FEATURE_TAR_GNU_EXTENSIONS + bool "Support for GNU tar extensions (long filenames)" + default y + depends on TAR || DPKG + help + With this option busybox supports GNU long filenames and + linknames. + +config FEATURE_TAR_LONG_OPTIONS + bool "Enable long options" + default n + depends on TAR && LONG_OPTS + help + Enable use of long options, increases size by about 400 Bytes + +config FEATURE_TAR_UNAME_GNAME + bool "Enable use of user and group names" + default n + depends on TAR + help + Enables use of user and group names in tar. This affects contents + listings (-t) and preserving permissions when unpacking (-p). + +200 bytes. + +config FEATURE_TAR_NOPRESERVE_TIME + bool "Enable -m (do not preserve time) option" + default n + depends on TAR + help + With this option busybox supports GNU tar -m + (do not preserve time) option. + +config FEATURE_TAR_SELINUX + bool "Support for extracting SELinux labels" + default n + depends on TAR && SELINUX + help + With this option busybox supports restoring SELinux labels + when extracting files from tar archives. + +config UNCOMPRESS + bool "uncompress" + default n + help + uncompress is used to decompress archives created by compress. + Not much used anymore, replaced by gzip/gunzip. + +config UNLZMA + bool "unlzma" + default n + help + unlzma is a compression utility using the Lempel-Ziv-Markov chain + compression algorithm, and range coding. Compression + is generally considerably better than that achieved by the bzip2 + compressors. + + The BusyBox unlzma applet is limited to de-compression only. + On an x86 system, this applet adds about 4K. + + Unless you have a specific application which requires unlzma, you + should probably say N here. + +config FEATURE_LZMA_FAST + bool "Optimize unlzma for speed" + default n + depends on UNLZMA + help + This option reduces decompression time by about 25% at the cost of + a 1K bigger binary. + +config LZMA + bool "Provide lzma alias which supports only unpacking" + default n + depends on UNLZMA + help + Enable this option if you want commands like "lzma -d" to work. + IOW: you'll get lzma applet, but it will always require -d option. + +config UNXZ + bool "unxz" + default n + help + unxz is a unlzma successor. + +config XZ + bool "Provide xz alias which supports only unpacking" + default n + depends on UNXZ + help + Enable this option if you want commands like "xz -d" to work. + IOW: you'll get xz applet, but it will always require -d option. + +config UNZIP + bool "unzip" + default n + help + unzip will list or extract files from a ZIP archive, + commonly found on DOS/WIN systems. The default behavior + (with no options) is to extract the archive into the + current directory. Use the `-d' option to extract to a + directory of your choice. + +endmenu diff --git a/archival/Kbuild b/archival/Kbuild deleted file mode 100644 index 3300ea90f..000000000 --- a/archival/Kbuild +++ /dev/null @@ -1,28 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -libs-y += libunarchive/ - -lib-y:= -lib-$(CONFIG_AR) += ar.o -lib-$(CONFIG_CPIO) += cpio.o -lib-$(CONFIG_DPKG) += dpkg.o -lib-$(CONFIG_DPKG_DEB) += dpkg_deb.o -lib-$(CONFIG_RPM2CPIO) += rpm2cpio.o -lib-$(CONFIG_RPM) += rpm.o -lib-$(CONFIG_TAR) += tar.o -lib-$(CONFIG_UNZIP) += unzip.o - -lib-$(CONFIG_LZOP) += lzop.o lzo1x_1.o lzo1x_1o.o lzo1x_d.o bbunzip.o -lib-$(CONFIG_LZOP_COMPR_HIGH) += lzo1x_9x.o -lib-$(CONFIG_GZIP) += gzip.o bbunzip.o -lib-$(CONFIG_BZIP2) += bzip2.o bbunzip.o - -lib-$(CONFIG_UNXZ) += bbunzip.o -lib-$(CONFIG_UNLZMA) += bbunzip.o -lib-$(CONFIG_BUNZIP2) += bbunzip.o -lib-$(CONFIG_GUNZIP) += bbunzip.o -lib-$(CONFIG_UNCOMPRESS) += bbunzip.o diff --git a/archival/Kbuild.src b/archival/Kbuild.src new file mode 100644 index 000000000..3300ea90f --- /dev/null +++ b/archival/Kbuild.src @@ -0,0 +1,28 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +libs-y += libunarchive/ + +lib-y:= +lib-$(CONFIG_AR) += ar.o +lib-$(CONFIG_CPIO) += cpio.o +lib-$(CONFIG_DPKG) += dpkg.o +lib-$(CONFIG_DPKG_DEB) += dpkg_deb.o +lib-$(CONFIG_RPM2CPIO) += rpm2cpio.o +lib-$(CONFIG_RPM) += rpm.o +lib-$(CONFIG_TAR) += tar.o +lib-$(CONFIG_UNZIP) += unzip.o + +lib-$(CONFIG_LZOP) += lzop.o lzo1x_1.o lzo1x_1o.o lzo1x_d.o bbunzip.o +lib-$(CONFIG_LZOP_COMPR_HIGH) += lzo1x_9x.o +lib-$(CONFIG_GZIP) += gzip.o bbunzip.o +lib-$(CONFIG_BZIP2) += bzip2.o bbunzip.o + +lib-$(CONFIG_UNXZ) += bbunzip.o +lib-$(CONFIG_UNLZMA) += bbunzip.o +lib-$(CONFIG_BUNZIP2) += bbunzip.o +lib-$(CONFIG_GUNZIP) += bbunzip.o +lib-$(CONFIG_UNCOMPRESS) += bbunzip.o diff --git a/archival/libunarchive/Kbuild b/archival/libunarchive/Kbuild deleted file mode 100644 index ed8e85793..000000000 --- a/archival/libunarchive/Kbuild +++ /dev/null @@ -1,57 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2004 by Erik Andersen -# -# Licensed under the GPL v2 or later, see the file LICENSE in this tarball. - -lib-y:= - -COMMON_FILES:= \ -\ - data_skip.o \ - data_extract_all.o \ - data_extract_to_stdout.o \ -\ - filter_accept_all.o \ - filter_accept_list.o \ - filter_accept_reject_list.o \ -\ - header_skip.o \ - header_list.o \ - header_verbose_list.o \ -\ - seek_by_read.o \ - seek_by_jump.o \ -\ - data_align.o \ - find_list_entry.o \ - init_handle.o - -DPKG_FILES:= \ - get_header_ar.o \ - unpack_ar_archive.o \ - get_header_tar.o \ - filter_accept_list_reassign.o - -lib-$(CONFIG_AR) += get_header_ar.o unpack_ar_archive.o -lib-$(CONFIG_BUNZIP2) += decompress_bunzip2.o -lib-$(CONFIG_UNLZMA) += decompress_unlzma.o -lib-$(CONFIG_CPIO) += get_header_cpio.o -lib-$(CONFIG_DPKG) += $(DPKG_FILES) -lib-$(CONFIG_DPKG_DEB) += $(DPKG_FILES) -lib-$(CONFIG_GUNZIP) += decompress_unzip.o -lib-$(CONFIG_RPM2CPIO) += decompress_unzip.o get_header_cpio.o -lib-$(CONFIG_RPM) += open_transformer.o decompress_unzip.o get_header_cpio.o -lib-$(CONFIG_TAR) += get_header_tar.o -lib-$(CONFIG_UNCOMPRESS) += decompress_uncompress.o -lib-$(CONFIG_UNZIP) += decompress_unzip.o -lib-$(CONFIG_FEATURE_SEAMLESS_Z) += open_transformer.o decompress_uncompress.o -lib-$(CONFIG_FEATURE_SEAMLESS_GZ) += open_transformer.o decompress_unzip.o get_header_tar_gz.o -lib-$(CONFIG_FEATURE_SEAMLESS_BZ2) += open_transformer.o decompress_bunzip2.o get_header_tar_bz2.o -lib-$(CONFIG_FEATURE_SEAMLESS_LZMA) += open_transformer.o decompress_unlzma.o get_header_tar_lzma.o -lib-$(CONFIG_FEATURE_SEAMLESS_XZ) += open_transformer.o decompress_unxz.o -lib-$(CONFIG_FEATURE_COMPRESS_USAGE) += decompress_bunzip2.o - -ifneq ($(lib-y),) -lib-y += $(COMMON_FILES) -endif diff --git a/archival/libunarchive/Kbuild.src b/archival/libunarchive/Kbuild.src new file mode 100644 index 000000000..ed8e85793 --- /dev/null +++ b/archival/libunarchive/Kbuild.src @@ -0,0 +1,57 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2004 by Erik Andersen +# +# Licensed under the GPL v2 or later, see the file LICENSE in this tarball. + +lib-y:= + +COMMON_FILES:= \ +\ + data_skip.o \ + data_extract_all.o \ + data_extract_to_stdout.o \ +\ + filter_accept_all.o \ + filter_accept_list.o \ + filter_accept_reject_list.o \ +\ + header_skip.o \ + header_list.o \ + header_verbose_list.o \ +\ + seek_by_read.o \ + seek_by_jump.o \ +\ + data_align.o \ + find_list_entry.o \ + init_handle.o + +DPKG_FILES:= \ + get_header_ar.o \ + unpack_ar_archive.o \ + get_header_tar.o \ + filter_accept_list_reassign.o + +lib-$(CONFIG_AR) += get_header_ar.o unpack_ar_archive.o +lib-$(CONFIG_BUNZIP2) += decompress_bunzip2.o +lib-$(CONFIG_UNLZMA) += decompress_unlzma.o +lib-$(CONFIG_CPIO) += get_header_cpio.o +lib-$(CONFIG_DPKG) += $(DPKG_FILES) +lib-$(CONFIG_DPKG_DEB) += $(DPKG_FILES) +lib-$(CONFIG_GUNZIP) += decompress_unzip.o +lib-$(CONFIG_RPM2CPIO) += decompress_unzip.o get_header_cpio.o +lib-$(CONFIG_RPM) += open_transformer.o decompress_unzip.o get_header_cpio.o +lib-$(CONFIG_TAR) += get_header_tar.o +lib-$(CONFIG_UNCOMPRESS) += decompress_uncompress.o +lib-$(CONFIG_UNZIP) += decompress_unzip.o +lib-$(CONFIG_FEATURE_SEAMLESS_Z) += open_transformer.o decompress_uncompress.o +lib-$(CONFIG_FEATURE_SEAMLESS_GZ) += open_transformer.o decompress_unzip.o get_header_tar_gz.o +lib-$(CONFIG_FEATURE_SEAMLESS_BZ2) += open_transformer.o decompress_bunzip2.o get_header_tar_bz2.o +lib-$(CONFIG_FEATURE_SEAMLESS_LZMA) += open_transformer.o decompress_unlzma.o get_header_tar_lzma.o +lib-$(CONFIG_FEATURE_SEAMLESS_XZ) += open_transformer.o decompress_unxz.o +lib-$(CONFIG_FEATURE_COMPRESS_USAGE) += decompress_bunzip2.o + +ifneq ($(lib-y),) +lib-y += $(COMMON_FILES) +endif diff --git a/console-tools/Config.in b/console-tools/Config.in deleted file mode 100644 index a7e995936..000000000 --- a/console-tools/Config.in +++ /dev/null @@ -1,161 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Console Utilities" - -config CHVT - bool "chvt" - default n - help - This program is used to change to another terminal. - Example: chvt 4 (change to terminal /dev/tty4) - -config FGCONSOLE - bool "fgconsole" - default n - help - This program prints active (foreground) console number. - -config CLEAR - bool "clear" - default n - help - This program clears the terminal screen. - -config DEALLOCVT - bool "deallocvt" - default n - help - This program deallocates unused virtual consoles. - -config DUMPKMAP - bool "dumpkmap" - default n - help - This program dumps the kernel's keyboard translation table to - stdout, in binary format. You can then use loadkmap to load it. - -config KBD_MODE - bool "kbd_mode" - default n - help - This program reports and sets keyboard mode. - -config LOADFONT - bool "loadfont" - default n - help - This program loads a console font from standard input. - -config LOADKMAP - bool "loadkmap" - default n - help - This program loads a keyboard translation table from - standard input. - -config OPENVT - bool "openvt" - default n - help - This program is used to start a command on an unused - virtual terminal. - -config RESET - bool "reset" - default n - help - This program is used to reset the terminal screen, if it - gets messed up. - -config RESIZE - bool "resize" - default n - help - This program is used to (re)set the width and height of your current - terminal. - -config FEATURE_RESIZE_PRINT - bool "Print environment variables" - default n - depends on RESIZE - help - Prints the newly set size (number of columns and rows) of - the terminal. - E.g.: - COLUMNS=80;LINES=44;export COLUMNS LINES; - -config SETCONSOLE - bool "setconsole" - default n - help - This program redirects the system console to another device, - like the current tty while logged in via telnet. - -config FEATURE_SETCONSOLE_LONG_OPTIONS - bool "Enable long options" - default n - depends on SETCONSOLE && LONG_OPTS - help - Support long options for the setconsole applet. - -config SETFONT - bool "setfont" - default n - help - Allows to load console screen map. Useful for i18n. - -config FEATURE_SETFONT_TEXTUAL_MAP - bool "Support reading textual screen maps" - default n - depends on SETFONT - help - Support reading textual screen maps. - -config DEFAULT_SETFONT_DIR - string "Default directory for console-tools files" - default "" - depends on SETFONT - help - Directory to use if setfont's params are simple filenames - (not /path/to/file or ./file). Default is "" (no default directory). - -config SETKEYCODES - bool "setkeycodes" - default n - help - This program loads entries into the kernel's scancode-to-keycode - map, allowing unusual keyboards to generate usable keycodes. - -config SETLOGCONS - bool "setlogcons" - default n - help - This program redirects the output console of kernel messages. - -config SHOWKEY - bool "showkey" - default n - help - Shows keys pressed. - -comment "Common options for loadfont and setfont" - depends on LOADFONT || SETFONT - -config FEATURE_LOADFONT_PSF2 - bool "Support for PSF2 console fonts" - default n - depends on LOADFONT || SETFONT - help - Support PSF2 console fonts. - -config FEATURE_LOADFONT_RAW - bool "Support for old (raw) console fonts" - default n - depends on LOADFONT || SETFONT - help - Support old (raw) console fonts. - -endmenu diff --git a/console-tools/Config.src b/console-tools/Config.src new file mode 100644 index 000000000..a7e995936 --- /dev/null +++ b/console-tools/Config.src @@ -0,0 +1,161 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Console Utilities" + +config CHVT + bool "chvt" + default n + help + This program is used to change to another terminal. + Example: chvt 4 (change to terminal /dev/tty4) + +config FGCONSOLE + bool "fgconsole" + default n + help + This program prints active (foreground) console number. + +config CLEAR + bool "clear" + default n + help + This program clears the terminal screen. + +config DEALLOCVT + bool "deallocvt" + default n + help + This program deallocates unused virtual consoles. + +config DUMPKMAP + bool "dumpkmap" + default n + help + This program dumps the kernel's keyboard translation table to + stdout, in binary format. You can then use loadkmap to load it. + +config KBD_MODE + bool "kbd_mode" + default n + help + This program reports and sets keyboard mode. + +config LOADFONT + bool "loadfont" + default n + help + This program loads a console font from standard input. + +config LOADKMAP + bool "loadkmap" + default n + help + This program loads a keyboard translation table from + standard input. + +config OPENVT + bool "openvt" + default n + help + This program is used to start a command on an unused + virtual terminal. + +config RESET + bool "reset" + default n + help + This program is used to reset the terminal screen, if it + gets messed up. + +config RESIZE + bool "resize" + default n + help + This program is used to (re)set the width and height of your current + terminal. + +config FEATURE_RESIZE_PRINT + bool "Print environment variables" + default n + depends on RESIZE + help + Prints the newly set size (number of columns and rows) of + the terminal. + E.g.: + COLUMNS=80;LINES=44;export COLUMNS LINES; + +config SETCONSOLE + bool "setconsole" + default n + help + This program redirects the system console to another device, + like the current tty while logged in via telnet. + +config FEATURE_SETCONSOLE_LONG_OPTIONS + bool "Enable long options" + default n + depends on SETCONSOLE && LONG_OPTS + help + Support long options for the setconsole applet. + +config SETFONT + bool "setfont" + default n + help + Allows to load console screen map. Useful for i18n. + +config FEATURE_SETFONT_TEXTUAL_MAP + bool "Support reading textual screen maps" + default n + depends on SETFONT + help + Support reading textual screen maps. + +config DEFAULT_SETFONT_DIR + string "Default directory for console-tools files" + default "" + depends on SETFONT + help + Directory to use if setfont's params are simple filenames + (not /path/to/file or ./file). Default is "" (no default directory). + +config SETKEYCODES + bool "setkeycodes" + default n + help + This program loads entries into the kernel's scancode-to-keycode + map, allowing unusual keyboards to generate usable keycodes. + +config SETLOGCONS + bool "setlogcons" + default n + help + This program redirects the output console of kernel messages. + +config SHOWKEY + bool "showkey" + default n + help + Shows keys pressed. + +comment "Common options for loadfont and setfont" + depends on LOADFONT || SETFONT + +config FEATURE_LOADFONT_PSF2 + bool "Support for PSF2 console fonts" + default n + depends on LOADFONT || SETFONT + help + Support PSF2 console fonts. + +config FEATURE_LOADFONT_RAW + bool "Support for old (raw) console fonts" + default n + depends on LOADFONT || SETFONT + help + Support old (raw) console fonts. + +endmenu diff --git a/console-tools/Kbuild b/console-tools/Kbuild deleted file mode 100644 index ad8b8ce77..000000000 --- a/console-tools/Kbuild +++ /dev/null @@ -1,23 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_CHVT) += chvt.o -lib-$(CONFIG_FGCONSOLE) += fgconsole.o -lib-$(CONFIG_CLEAR) += clear.o -lib-$(CONFIG_DEALLOCVT) += deallocvt.o -lib-$(CONFIG_DUMPKMAP) += dumpkmap.o -lib-$(CONFIG_SETCONSOLE) += setconsole.o -lib-$(CONFIG_KBD_MODE) += kbd_mode.o -lib-$(CONFIG_LOADFONT) += loadfont.o -lib-$(CONFIG_LOADKMAP) += loadkmap.o -lib-$(CONFIG_OPENVT) += openvt.o -lib-$(CONFIG_RESET) += reset.o -lib-$(CONFIG_RESIZE) += resize.o -lib-$(CONFIG_SETFONT) += loadfont.o -lib-$(CONFIG_SETKEYCODES) += setkeycodes.o -lib-$(CONFIG_SETLOGCONS) += setlogcons.o -lib-$(CONFIG_SHOWKEY) += showkey.o diff --git a/console-tools/Kbuild.src b/console-tools/Kbuild.src new file mode 100644 index 000000000..ad8b8ce77 --- /dev/null +++ b/console-tools/Kbuild.src @@ -0,0 +1,23 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_CHVT) += chvt.o +lib-$(CONFIG_FGCONSOLE) += fgconsole.o +lib-$(CONFIG_CLEAR) += clear.o +lib-$(CONFIG_DEALLOCVT) += deallocvt.o +lib-$(CONFIG_DUMPKMAP) += dumpkmap.o +lib-$(CONFIG_SETCONSOLE) += setconsole.o +lib-$(CONFIG_KBD_MODE) += kbd_mode.o +lib-$(CONFIG_LOADFONT) += loadfont.o +lib-$(CONFIG_LOADKMAP) += loadkmap.o +lib-$(CONFIG_OPENVT) += openvt.o +lib-$(CONFIG_RESET) += reset.o +lib-$(CONFIG_RESIZE) += resize.o +lib-$(CONFIG_SETFONT) += loadfont.o +lib-$(CONFIG_SETKEYCODES) += setkeycodes.o +lib-$(CONFIG_SETLOGCONS) += setlogcons.o +lib-$(CONFIG_SHOWKEY) += showkey.o diff --git a/coreutils/libcoreutils/Kbuild b/coreutils/libcoreutils/Kbuild deleted file mode 100644 index 755d01f86..000000000 --- a/coreutils/libcoreutils/Kbuild +++ /dev/null @@ -1,12 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2004 by Erik Andersen -# -# Licensed under the GPL v2 or later, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_MKFIFO) += getopt_mk_fifo_nod.o -lib-$(CONFIG_MKNOD) += getopt_mk_fifo_nod.o -lib-$(CONFIG_INSTALL) += cp_mv_stat.o -lib-$(CONFIG_CP) += cp_mv_stat.o -lib-$(CONFIG_MV) += cp_mv_stat.o diff --git a/coreutils/libcoreutils/Kbuild.src b/coreutils/libcoreutils/Kbuild.src new file mode 100644 index 000000000..755d01f86 --- /dev/null +++ b/coreutils/libcoreutils/Kbuild.src @@ -0,0 +1,12 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2004 by Erik Andersen +# +# Licensed under the GPL v2 or later, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_MKFIFO) += getopt_mk_fifo_nod.o +lib-$(CONFIG_MKNOD) += getopt_mk_fifo_nod.o +lib-$(CONFIG_INSTALL) += cp_mv_stat.o +lib-$(CONFIG_CP) += cp_mv_stat.o +lib-$(CONFIG_MV) += cp_mv_stat.o diff --git a/debianutils/Config.in b/debianutils/Config.in deleted file mode 100644 index 9146f3ef4..000000000 --- a/debianutils/Config.in +++ /dev/null @@ -1,84 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Debian Utilities" - -config MKTEMP - bool "mktemp" - default n - help - mktemp is used to create unique temporary files - -config PIPE_PROGRESS - bool "pipe_progress" - default n - help - Display a dot to indicate pipe activity. - -config RUN_PARTS - bool "run-parts" - default n - help - run-parts is a utility designed to run all the scripts in a directory. - - It is useful to set up a directory like cron.daily, where you need to - execute all the scripts in that directory. - - In this implementation of run-parts some features (such as report - mode) are not implemented. - - Unless you know that run-parts is used in some of your scripts - you can safely say N here. - -config FEATURE_RUN_PARTS_LONG_OPTIONS - bool "Enable long options" - default n - depends on RUN_PARTS && LONG_OPTS - help - Support long options for the run-parts applet. - -config FEATURE_RUN_PARTS_FANCY - bool "Support additional arguments" - default n - depends on RUN_PARTS - help - Support additional options: - -l --list print the names of the all matching files (not - limited to executables), but don't actually run them. - -config START_STOP_DAEMON - bool "start-stop-daemon" - default n - help - start-stop-daemon is used to control the creation and - termination of system-level processes, usually the ones - started during the startup of the system. - -config FEATURE_START_STOP_DAEMON_FANCY - bool "Support additional arguments" - default n - depends on START_STOP_DAEMON - help - Support additional arguments. - -o|--oknodo ignored since we exit with 0 anyway - -v|--verbose - -N|--nicelevel N - -config FEATURE_START_STOP_DAEMON_LONG_OPTIONS - bool "Enable long options" - default n - depends on START_STOP_DAEMON && LONG_OPTS - help - Support long options for the start-stop-daemon applet. - -config WHICH - bool "which" - default n - help - which is used to find programs in your PATH and - print out their pathnames. - -endmenu - diff --git a/debianutils/Config.src b/debianutils/Config.src new file mode 100644 index 000000000..9146f3ef4 --- /dev/null +++ b/debianutils/Config.src @@ -0,0 +1,84 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Debian Utilities" + +config MKTEMP + bool "mktemp" + default n + help + mktemp is used to create unique temporary files + +config PIPE_PROGRESS + bool "pipe_progress" + default n + help + Display a dot to indicate pipe activity. + +config RUN_PARTS + bool "run-parts" + default n + help + run-parts is a utility designed to run all the scripts in a directory. + + It is useful to set up a directory like cron.daily, where you need to + execute all the scripts in that directory. + + In this implementation of run-parts some features (such as report + mode) are not implemented. + + Unless you know that run-parts is used in some of your scripts + you can safely say N here. + +config FEATURE_RUN_PARTS_LONG_OPTIONS + bool "Enable long options" + default n + depends on RUN_PARTS && LONG_OPTS + help + Support long options for the run-parts applet. + +config FEATURE_RUN_PARTS_FANCY + bool "Support additional arguments" + default n + depends on RUN_PARTS + help + Support additional options: + -l --list print the names of the all matching files (not + limited to executables), but don't actually run them. + +config START_STOP_DAEMON + bool "start-stop-daemon" + default n + help + start-stop-daemon is used to control the creation and + termination of system-level processes, usually the ones + started during the startup of the system. + +config FEATURE_START_STOP_DAEMON_FANCY + bool "Support additional arguments" + default n + depends on START_STOP_DAEMON + help + Support additional arguments. + -o|--oknodo ignored since we exit with 0 anyway + -v|--verbose + -N|--nicelevel N + +config FEATURE_START_STOP_DAEMON_LONG_OPTIONS + bool "Enable long options" + default n + depends on START_STOP_DAEMON && LONG_OPTS + help + Support long options for the start-stop-daemon applet. + +config WHICH + bool "which" + default n + help + which is used to find programs in your PATH and + print out their pathnames. + +endmenu + diff --git a/debianutils/Kbuild b/debianutils/Kbuild deleted file mode 100644 index bcf6126ad..000000000 --- a/debianutils/Kbuild +++ /dev/null @@ -1,12 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_MKTEMP) += mktemp.o -lib-$(CONFIG_PIPE_PROGRESS) += pipe_progress.o -lib-$(CONFIG_RUN_PARTS) += run_parts.o -lib-$(CONFIG_START_STOP_DAEMON) += start_stop_daemon.o -lib-$(CONFIG_WHICH) += which.o diff --git a/debianutils/Kbuild.src b/debianutils/Kbuild.src new file mode 100644 index 000000000..bcf6126ad --- /dev/null +++ b/debianutils/Kbuild.src @@ -0,0 +1,12 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_MKTEMP) += mktemp.o +lib-$(CONFIG_PIPE_PROGRESS) += pipe_progress.o +lib-$(CONFIG_RUN_PARTS) += run_parts.o +lib-$(CONFIG_START_STOP_DAEMON) += start_stop_daemon.o +lib-$(CONFIG_WHICH) += which.o diff --git a/e2fsprogs/Config.in b/e2fsprogs/Config.in deleted file mode 100644 index 964d08e4c..000000000 --- a/e2fsprogs/Config.in +++ /dev/null @@ -1,68 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux Ext2 FS Progs" - -config CHATTR - bool "chattr" - default n - help - chattr changes the file attributes on a second extended file system. - -### config E2FSCK -### bool "e2fsck" -### default n -### help -### e2fsck is used to check Linux second extended file systems (ext2fs). -### e2fsck also supports ext2 filesystems countaining a journal (ext3). -### The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also -### provided. - -config FSCK - bool "fsck" - default n - help - fsck is used to check and optionally repair one or more filesystems. - In actuality, fsck is simply a front-end for the various file system - checkers (fsck.fstype) available under Linux. - -config LSATTR - bool "lsattr" - default n - help - lsattr lists the file attributes on a second extended file system. - -### config MKE2FS -### bool "mke2fs" -### default n -### help -### mke2fs is used to create an ext2/ext3 filesystem. The normal compat -### symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided. - -config TUNE2FS - bool "tune2fs" - default n - help - tune2fs allows the system administrator to adjust various tunable - filesystem parameters on Linux ext2/ext3 filesystems. - -### config E2LABEL -### bool "e2label" -### default n -### depends on TUNE2FS -### help -### e2label will display or change the filesystem label on the ext2 -### filesystem located on device. - -### NB: this one is now provided by util-linux/volume_id/* -### config FINDFS -### bool "findfs" -### default n -### depends on TUNE2FS -### help -### findfs will search the disks in the system looking for a filesystem -### which has a label matching label or a UUID equal to uuid. - -endmenu diff --git a/e2fsprogs/Config.src b/e2fsprogs/Config.src new file mode 100644 index 000000000..964d08e4c --- /dev/null +++ b/e2fsprogs/Config.src @@ -0,0 +1,68 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Linux Ext2 FS Progs" + +config CHATTR + bool "chattr" + default n + help + chattr changes the file attributes on a second extended file system. + +### config E2FSCK +### bool "e2fsck" +### default n +### help +### e2fsck is used to check Linux second extended file systems (ext2fs). +### e2fsck also supports ext2 filesystems countaining a journal (ext3). +### The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also +### provided. + +config FSCK + bool "fsck" + default n + help + fsck is used to check and optionally repair one or more filesystems. + In actuality, fsck is simply a front-end for the various file system + checkers (fsck.fstype) available under Linux. + +config LSATTR + bool "lsattr" + default n + help + lsattr lists the file attributes on a second extended file system. + +### config MKE2FS +### bool "mke2fs" +### default n +### help +### mke2fs is used to create an ext2/ext3 filesystem. The normal compat +### symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided. + +config TUNE2FS + bool "tune2fs" + default n + help + tune2fs allows the system administrator to adjust various tunable + filesystem parameters on Linux ext2/ext3 filesystems. + +### config E2LABEL +### bool "e2label" +### default n +### depends on TUNE2FS +### help +### e2label will display or change the filesystem label on the ext2 +### filesystem located on device. + +### NB: this one is now provided by util-linux/volume_id/* +### config FINDFS +### bool "findfs" +### default n +### depends on TUNE2FS +### help +### findfs will search the disks in the system looking for a filesystem +### which has a label matching label or a UUID equal to uuid. + +endmenu diff --git a/e2fsprogs/Kbuild b/e2fsprogs/Kbuild deleted file mode 100644 index 0fdc9d215..000000000 --- a/e2fsprogs/Kbuild +++ /dev/null @@ -1,13 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= - -lib-$(CONFIG_CHATTR) += chattr.o e2fs_lib.o -lib-$(CONFIG_LSATTR) += lsattr.o e2fs_lib.o - -lib-$(CONFIG_FSCK) += fsck.o -lib-$(CONFIG_TUNE2FS) += tune2fs.o diff --git a/e2fsprogs/Kbuild.src b/e2fsprogs/Kbuild.src new file mode 100644 index 000000000..0fdc9d215 --- /dev/null +++ b/e2fsprogs/Kbuild.src @@ -0,0 +1,13 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= + +lib-$(CONFIG_CHATTR) += chattr.o e2fs_lib.o +lib-$(CONFIG_LSATTR) += lsattr.o e2fs_lib.o + +lib-$(CONFIG_FSCK) += fsck.o +lib-$(CONFIG_TUNE2FS) += tune2fs.o diff --git a/e2fsprogs/old_e2fsprogs/Config.in b/e2fsprogs/old_e2fsprogs/Config.in deleted file mode 100644 index 5990f556c..000000000 --- a/e2fsprogs/old_e2fsprogs/Config.in +++ /dev/null @@ -1,67 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux Ext2 FS Progs" - -config CHATTR - bool "chattr" - default n - help - chattr changes the file attributes on a second extended file system. - -config E2FSCK - bool "e2fsck" - default n - help - e2fsck is used to check Linux second extended file systems (ext2fs). - e2fsck also supports ext2 filesystems countaining a journal (ext3). - The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also - provided. - -config FSCK - bool "fsck" - default n - help - fsck is used to check and optionally repair one or more filesystems. - In actuality, fsck is simply a front-end for the various file system - checkers (fsck.fstype) available under Linux. - -config LSATTR - bool "lsattr" - default n - help - lsattr lists the file attributes on a second extended file system. - -config MKE2FS - bool "mke2fs" - default n - help - mke2fs is used to create an ext2/ext3 filesystem. The normal compat - symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided. - -config TUNE2FS - bool "tune2fs" - default n - help - tune2fs allows the system administrator to adjust various tunable - filesystem parameters on Linux ext2/ext3 filesystems. - -config E2LABEL - bool "e2label" - default n - depends on TUNE2FS - help - e2label will display or change the filesystem label on the ext2 - filesystem located on device. - -config FINDFS - bool "findfs" - default n - depends on TUNE2FS - help - findfs will search the disks in the system looking for a filesystem - which has a label matching label or a UUID equal to uuid. - -endmenu diff --git a/e2fsprogs/old_e2fsprogs/Config.src b/e2fsprogs/old_e2fsprogs/Config.src new file mode 100644 index 000000000..5990f556c --- /dev/null +++ b/e2fsprogs/old_e2fsprogs/Config.src @@ -0,0 +1,67 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Linux Ext2 FS Progs" + +config CHATTR + bool "chattr" + default n + help + chattr changes the file attributes on a second extended file system. + +config E2FSCK + bool "e2fsck" + default n + help + e2fsck is used to check Linux second extended file systems (ext2fs). + e2fsck also supports ext2 filesystems countaining a journal (ext3). + The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also + provided. + +config FSCK + bool "fsck" + default n + help + fsck is used to check and optionally repair one or more filesystems. + In actuality, fsck is simply a front-end for the various file system + checkers (fsck.fstype) available under Linux. + +config LSATTR + bool "lsattr" + default n + help + lsattr lists the file attributes on a second extended file system. + +config MKE2FS + bool "mke2fs" + default n + help + mke2fs is used to create an ext2/ext3 filesystem. The normal compat + symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided. + +config TUNE2FS + bool "tune2fs" + default n + help + tune2fs allows the system administrator to adjust various tunable + filesystem parameters on Linux ext2/ext3 filesystems. + +config E2LABEL + bool "e2label" + default n + depends on TUNE2FS + help + e2label will display or change the filesystem label on the ext2 + filesystem located on device. + +config FINDFS + bool "findfs" + default n + depends on TUNE2FS + help + findfs will search the disks in the system looking for a filesystem + which has a label matching label or a UUID equal to uuid. + +endmenu diff --git a/e2fsprogs/old_e2fsprogs/Kbuild b/e2fsprogs/old_e2fsprogs/Kbuild deleted file mode 100644 index b05bb92e1..000000000 --- a/e2fsprogs/old_e2fsprogs/Kbuild +++ /dev/null @@ -1,16 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= - -lib-$(CONFIG_CHATTR) += chattr.o -lib-$(CONFIG_E2FSCK) += e2fsck.o util.o -lib-$(CONFIG_FSCK) += fsck.o util.o -lib-$(CONFIG_LSATTR) += lsattr.o -lib-$(CONFIG_MKE2FS) += mke2fs.o util.o -lib-$(CONFIG_TUNE2FS) += tune2fs.o util.o - -CFLAGS += -include $(srctree)/e2fsprogs/e2fsbb.h diff --git a/e2fsprogs/old_e2fsprogs/Kbuild.src b/e2fsprogs/old_e2fsprogs/Kbuild.src new file mode 100644 index 000000000..b05bb92e1 --- /dev/null +++ b/e2fsprogs/old_e2fsprogs/Kbuild.src @@ -0,0 +1,16 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= + +lib-$(CONFIG_CHATTR) += chattr.o +lib-$(CONFIG_E2FSCK) += e2fsck.o util.o +lib-$(CONFIG_FSCK) += fsck.o util.o +lib-$(CONFIG_LSATTR) += lsattr.o +lib-$(CONFIG_MKE2FS) += mke2fs.o util.o +lib-$(CONFIG_TUNE2FS) += tune2fs.o util.o + +CFLAGS += -include $(srctree)/e2fsprogs/e2fsbb.h diff --git a/e2fsprogs/old_e2fsprogs/blkid/Kbuild b/e2fsprogs/old_e2fsprogs/blkid/Kbuild deleted file mode 100644 index ddcfdfd9a..000000000 --- a/e2fsprogs/old_e2fsprogs/blkid/Kbuild +++ /dev/null @@ -1,23 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -NEEDED-$(CONFIG_E2FSCK) = y -NEEDED-$(CONFIG_FSCK) = y -NEEDED-$(CONFIG_MKE2FS) = y -NEEDED-$(CONFIG_TUNE2FS) = y - -lib-y:= -lib-$(NEEDED-y) += cache.o dev.o devname.o devno.o blkid_getsize.o \ - probe.o read.o resolve.o save.o tag.o list.o - -CFLAGS_dev.o := -include $(srctree)/include/busybox.h -CFLAGS_devname.o := -include $(srctree)/include/busybox.h -CFLAGS_devno.o := -include $(srctree)/include/busybox.h -CFLAGS_blkid_getsize.o := -include $(srctree)/include/busybox.h -CFLAGS_probe.o := -include $(srctree)/include/busybox.h -CFLAGS_save.o := -include $(srctree)/include/busybox.h -CFLAGS_tag.o := -include $(srctree)/include/busybox.h -CFLAGS_list.o := -include $(srctree)/include/busybox.h diff --git a/e2fsprogs/old_e2fsprogs/blkid/Kbuild.src b/e2fsprogs/old_e2fsprogs/blkid/Kbuild.src new file mode 100644 index 000000000..ddcfdfd9a --- /dev/null +++ b/e2fsprogs/old_e2fsprogs/blkid/Kbuild.src @@ -0,0 +1,23 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +NEEDED-$(CONFIG_E2FSCK) = y +NEEDED-$(CONFIG_FSCK) = y +NEEDED-$(CONFIG_MKE2FS) = y +NEEDED-$(CONFIG_TUNE2FS) = y + +lib-y:= +lib-$(NEEDED-y) += cache.o dev.o devname.o devno.o blkid_getsize.o \ + probe.o read.o resolve.o save.o tag.o list.o + +CFLAGS_dev.o := -include $(srctree)/include/busybox.h +CFLAGS_devname.o := -include $(srctree)/include/busybox.h +CFLAGS_devno.o := -include $(srctree)/include/busybox.h +CFLAGS_blkid_getsize.o := -include $(srctree)/include/busybox.h +CFLAGS_probe.o := -include $(srctree)/include/busybox.h +CFLAGS_save.o := -include $(srctree)/include/busybox.h +CFLAGS_tag.o := -include $(srctree)/include/busybox.h +CFLAGS_list.o := -include $(srctree)/include/busybox.h diff --git a/e2fsprogs/old_e2fsprogs/e2p/Kbuild b/e2fsprogs/old_e2fsprogs/e2p/Kbuild deleted file mode 100644 index c0ff824e3..000000000 --- a/e2fsprogs/old_e2fsprogs/e2p/Kbuild +++ /dev/null @@ -1,15 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -NEEDED-$(CONFIG_CHATTR) = y -NEEDED-$(CONFIG_LSATTR) = y -NEEDED-$(CONFIG_MKE2FS) = y -NEEDED-$(CONFIG_TUNE2FS) = y - -lib-y:= -lib-$(NEEDED-y) += fgetsetflags.o fgetsetversion.o pf.o iod.o mntopts.o \ - feature.o ls.o uuid.o pe.o ostype.o ps.o hashstr.o \ - parse_num.o diff --git a/e2fsprogs/old_e2fsprogs/e2p/Kbuild.src b/e2fsprogs/old_e2fsprogs/e2p/Kbuild.src new file mode 100644 index 000000000..c0ff824e3 --- /dev/null +++ b/e2fsprogs/old_e2fsprogs/e2p/Kbuild.src @@ -0,0 +1,15 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +NEEDED-$(CONFIG_CHATTR) = y +NEEDED-$(CONFIG_LSATTR) = y +NEEDED-$(CONFIG_MKE2FS) = y +NEEDED-$(CONFIG_TUNE2FS) = y + +lib-y:= +lib-$(NEEDED-y) += fgetsetflags.o fgetsetversion.o pf.o iod.o mntopts.o \ + feature.o ls.o uuid.o pe.o ostype.o ps.o hashstr.o \ + parse_num.o diff --git a/e2fsprogs/old_e2fsprogs/ext2fs/Kbuild b/e2fsprogs/old_e2fsprogs/ext2fs/Kbuild deleted file mode 100644 index 185887a44..000000000 --- a/e2fsprogs/old_e2fsprogs/ext2fs/Kbuild +++ /dev/null @@ -1,23 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -NEEDED-$(CONFIG_E2FSCK) = y -NEEDED-$(CONFIG_FSCK) = y -NEEDED-$(CONFIG_MKE2FS) = y -NEEDED-$(CONFIG_TUNE2FS) = y - -lib-y:= -lib-$(NEEDED-y) += gen_bitmap.o bitops.o ismounted.o mkjournal.o unix_io.o \ - rw_bitmaps.o initialize.o bitmaps.o block.o \ - ind_block.o inode.o freefs.o alloc_stats.o closefs.o \ - openfs.o io_manager.o finddev.o read_bb.o alloc.o badblocks.o \ - getsize.o getsectsize.o alloc_tables.o read_bb_file.o mkdir.o \ - bb_inode.o newdir.o alloc_sb.o lookup.o dirblock.o expanddir.o \ - dir_iterate.o link.o res_gdt.o icount.o get_pathname.o dblist.o \ - dirhash.o version.o flushb.o unlink.o check_desc.o valid_blk.o \ - ext_attr.o bmap.o dblist_dir.o ext2fs_inline.o swapfs.o - -CFLAGS += -include $(srctree)/e2fsprogs/e2fsbb.h diff --git a/e2fsprogs/old_e2fsprogs/ext2fs/Kbuild.src b/e2fsprogs/old_e2fsprogs/ext2fs/Kbuild.src new file mode 100644 index 000000000..185887a44 --- /dev/null +++ b/e2fsprogs/old_e2fsprogs/ext2fs/Kbuild.src @@ -0,0 +1,23 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +NEEDED-$(CONFIG_E2FSCK) = y +NEEDED-$(CONFIG_FSCK) = y +NEEDED-$(CONFIG_MKE2FS) = y +NEEDED-$(CONFIG_TUNE2FS) = y + +lib-y:= +lib-$(NEEDED-y) += gen_bitmap.o bitops.o ismounted.o mkjournal.o unix_io.o \ + rw_bitmaps.o initialize.o bitmaps.o block.o \ + ind_block.o inode.o freefs.o alloc_stats.o closefs.o \ + openfs.o io_manager.o finddev.o read_bb.o alloc.o badblocks.o \ + getsize.o getsectsize.o alloc_tables.o read_bb_file.o mkdir.o \ + bb_inode.o newdir.o alloc_sb.o lookup.o dirblock.o expanddir.o \ + dir_iterate.o link.o res_gdt.o icount.o get_pathname.o dblist.o \ + dirhash.o version.o flushb.o unlink.o check_desc.o valid_blk.o \ + ext_attr.o bmap.o dblist_dir.o ext2fs_inline.o swapfs.o + +CFLAGS += -include $(srctree)/e2fsprogs/e2fsbb.h diff --git a/e2fsprogs/old_e2fsprogs/uuid/Kbuild b/e2fsprogs/old_e2fsprogs/uuid/Kbuild deleted file mode 100644 index dde981840..000000000 --- a/e2fsprogs/old_e2fsprogs/uuid/Kbuild +++ /dev/null @@ -1,14 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -NEEDED-$(CONFIG_E2FSCK) = y -NEEDED-$(CONFIG_FSCK) = y -NEEDED-$(CONFIG_MKE2FS) = y -NEEDED-$(CONFIG_TUNE2FS) = y - -lib-y:= -lib-$(NEEDED-y) += compare.o gen_uuid.o pack.o parse.o unpack.o unparse.o \ - uuid_time.o diff --git a/e2fsprogs/old_e2fsprogs/uuid/Kbuild.src b/e2fsprogs/old_e2fsprogs/uuid/Kbuild.src new file mode 100644 index 000000000..dde981840 --- /dev/null +++ b/e2fsprogs/old_e2fsprogs/uuid/Kbuild.src @@ -0,0 +1,14 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +NEEDED-$(CONFIG_E2FSCK) = y +NEEDED-$(CONFIG_FSCK) = y +NEEDED-$(CONFIG_MKE2FS) = y +NEEDED-$(CONFIG_TUNE2FS) = y + +lib-y:= +lib-$(NEEDED-y) += compare.o gen_uuid.o pack.o parse.o unpack.o unparse.o \ + uuid_time.o diff --git a/editors/Config.in b/editors/Config.in deleted file mode 100644 index 5f9566f0a..000000000 --- a/editors/Config.in +++ /dev/null @@ -1,199 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Editors" - -config AWK - bool "awk" - default n - help - Awk is used as a pattern scanning and processing language. This is - the BusyBox implementation of that programming language. - -config FEATURE_AWK_LIBM - bool "Enable math functions (requires libm)" - default n - depends on AWK - help - Enable math functions of the Awk programming language. - NOTE: This will require libm to be present for linking. - -config CMP - bool "cmp" - default n - help - cmp is used to compare two files and returns the result - to standard output. - -config DIFF - bool "diff" - default n - help - diff compares two files or directories and outputs the - differences between them in a form that can be given to - the patch command. - -config FEATURE_DIFF_LONG_OPTIONS - bool "Enable long options" - default n - depends on DIFF && LONG_OPTS - help - Enable use of long options. - -config FEATURE_DIFF_DIR - bool "Enable directory support" - default y - depends on DIFF - help - This option enables support for directory and subdirectory - comparison. - -config ED - bool "ed" - default n - help - The original 1970's Unix text editor, from the days of teletypes. - Small, simple, evil. Part of SUSv3. If you're not already using - this, you don't need it. - -config PATCH - bool "patch" - default n - help - Apply a unified diff formatted patch. - -config SED - bool "sed" - default n - help - sed is used to perform text transformations on a file - or input from a pipeline. - -config VI - bool "vi" - default n - help - 'vi' is a text editor. More specifically, it is the One True - text editor . It does, however, have a rather steep - learning curve. If you are not already comfortable with 'vi' - you may wish to use something else. - -config FEATURE_VI_MAX_LEN - int "Maximum screen width in vi" - range 256 16384 - default 4096 - depends on VI - help - Contrary to what you may think, this is not eating much. - Make it smaller than 4k only if you are very limited on memory. - -config FEATURE_VI_8BIT - bool "Allow vi to display 8-bit chars (otherwise shows dots)" - default y - depends on VI - help - If your terminal can display characters with high bit set, - you may want to enable this. Note: vi is not Unicode-capable. - If your terminal combines several 8-bit bytes into one character - (as in Unicode mode), this will not work properly. - -config FEATURE_VI_COLON - bool "Enable \":\" colon commands (no \"ex\" mode)" - default y - depends on VI - help - Enable a limited set of colon commands for vi. This does not - provide an "ex" mode. - -config FEATURE_VI_YANKMARK - bool "Enable yank/put commands and mark cmds" - default y - depends on VI - help - This will enable you to use yank and put, as well as mark in - busybox vi. - -config FEATURE_VI_SEARCH - bool "Enable search and replace cmds" - default y - depends on VI - help - Select this if you wish to be able to do search and replace in - busybox vi. - -config FEATURE_VI_USE_SIGNALS - bool "Catch signals" - default y - depends on VI - help - Selecting this option will make busybox vi signal aware. This will - make busybox vi support SIGWINCH to deal with Window Changes, catch - Ctrl-Z and Ctrl-C and alarms. - -config FEATURE_VI_DOT_CMD - bool "Remember previous cmd and \".\" cmd" - default y - depends on VI - help - Make busybox vi remember the last command and be able to repeat it. - -config FEATURE_VI_READONLY - bool "Enable -R option and \"view\" mode" - default y - depends on VI - help - Enable the read-only command line option, which allows the user to - open a file in read-only mode. - -config FEATURE_VI_SETOPTS - bool "Enable set-able options, ai ic showmatch" - default y - depends on VI - help - Enable the editor to set some (ai, ic, showmatch) options. - -config FEATURE_VI_SET - bool "Support for :set" - default y - depends on VI - help - Support for ":set". - -config FEATURE_VI_WIN_RESIZE - bool "Handle window resize" - default y - depends on VI - help - Make busybox vi behave nicely with terminals that get resized. - -config FEATURE_VI_ASK_TERMINAL - bool "Use 'tell me cursor position' ESC sequence to measure window" - default n - depends on VI - help - If terminal size can't be retrieved and $LINES/$COLUMNS are not set, - this option makes vi perform a last-ditch effort to find it: - vi positions cursor to 999,999 and asks terminal to report real - cursor position using "ESC [ 6 n" escape sequence, then reads stdin. - - This is not clean but helps a lot on serial lines and such. - -config FEATURE_VI_OPTIMIZE_CURSOR - bool "Optimize cursor movement" - default y - depends on VI - help - This will make the cursor movement faster, but requires more memory - and it makes the applet a tiny bit larger. - -config FEATURE_ALLOW_EXEC - bool "Allow vi and awk to execute shell commands" - default y - depends on VI || AWK - help - Enables vi and awk features which allows user to execute - shell commands (using system() C call). - -endmenu diff --git a/editors/Config.src b/editors/Config.src new file mode 100644 index 000000000..5f9566f0a --- /dev/null +++ b/editors/Config.src @@ -0,0 +1,199 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Editors" + +config AWK + bool "awk" + default n + help + Awk is used as a pattern scanning and processing language. This is + the BusyBox implementation of that programming language. + +config FEATURE_AWK_LIBM + bool "Enable math functions (requires libm)" + default n + depends on AWK + help + Enable math functions of the Awk programming language. + NOTE: This will require libm to be present for linking. + +config CMP + bool "cmp" + default n + help + cmp is used to compare two files and returns the result + to standard output. + +config DIFF + bool "diff" + default n + help + diff compares two files or directories and outputs the + differences between them in a form that can be given to + the patch command. + +config FEATURE_DIFF_LONG_OPTIONS + bool "Enable long options" + default n + depends on DIFF && LONG_OPTS + help + Enable use of long options. + +config FEATURE_DIFF_DIR + bool "Enable directory support" + default y + depends on DIFF + help + This option enables support for directory and subdirectory + comparison. + +config ED + bool "ed" + default n + help + The original 1970's Unix text editor, from the days of teletypes. + Small, simple, evil. Part of SUSv3. If you're not already using + this, you don't need it. + +config PATCH + bool "patch" + default n + help + Apply a unified diff formatted patch. + +config SED + bool "sed" + default n + help + sed is used to perform text transformations on a file + or input from a pipeline. + +config VI + bool "vi" + default n + help + 'vi' is a text editor. More specifically, it is the One True + text editor . It does, however, have a rather steep + learning curve. If you are not already comfortable with 'vi' + you may wish to use something else. + +config FEATURE_VI_MAX_LEN + int "Maximum screen width in vi" + range 256 16384 + default 4096 + depends on VI + help + Contrary to what you may think, this is not eating much. + Make it smaller than 4k only if you are very limited on memory. + +config FEATURE_VI_8BIT + bool "Allow vi to display 8-bit chars (otherwise shows dots)" + default y + depends on VI + help + If your terminal can display characters with high bit set, + you may want to enable this. Note: vi is not Unicode-capable. + If your terminal combines several 8-bit bytes into one character + (as in Unicode mode), this will not work properly. + +config FEATURE_VI_COLON + bool "Enable \":\" colon commands (no \"ex\" mode)" + default y + depends on VI + help + Enable a limited set of colon commands for vi. This does not + provide an "ex" mode. + +config FEATURE_VI_YANKMARK + bool "Enable yank/put commands and mark cmds" + default y + depends on VI + help + This will enable you to use yank and put, as well as mark in + busybox vi. + +config FEATURE_VI_SEARCH + bool "Enable search and replace cmds" + default y + depends on VI + help + Select this if you wish to be able to do search and replace in + busybox vi. + +config FEATURE_VI_USE_SIGNALS + bool "Catch signals" + default y + depends on VI + help + Selecting this option will make busybox vi signal aware. This will + make busybox vi support SIGWINCH to deal with Window Changes, catch + Ctrl-Z and Ctrl-C and alarms. + +config FEATURE_VI_DOT_CMD + bool "Remember previous cmd and \".\" cmd" + default y + depends on VI + help + Make busybox vi remember the last command and be able to repeat it. + +config FEATURE_VI_READONLY + bool "Enable -R option and \"view\" mode" + default y + depends on VI + help + Enable the read-only command line option, which allows the user to + open a file in read-only mode. + +config FEATURE_VI_SETOPTS + bool "Enable set-able options, ai ic showmatch" + default y + depends on VI + help + Enable the editor to set some (ai, ic, showmatch) options. + +config FEATURE_VI_SET + bool "Support for :set" + default y + depends on VI + help + Support for ":set". + +config FEATURE_VI_WIN_RESIZE + bool "Handle window resize" + default y + depends on VI + help + Make busybox vi behave nicely with terminals that get resized. + +config FEATURE_VI_ASK_TERMINAL + bool "Use 'tell me cursor position' ESC sequence to measure window" + default n + depends on VI + help + If terminal size can't be retrieved and $LINES/$COLUMNS are not set, + this option makes vi perform a last-ditch effort to find it: + vi positions cursor to 999,999 and asks terminal to report real + cursor position using "ESC [ 6 n" escape sequence, then reads stdin. + + This is not clean but helps a lot on serial lines and such. + +config FEATURE_VI_OPTIMIZE_CURSOR + bool "Optimize cursor movement" + default y + depends on VI + help + This will make the cursor movement faster, but requires more memory + and it makes the applet a tiny bit larger. + +config FEATURE_ALLOW_EXEC + bool "Allow vi and awk to execute shell commands" + default y + depends on VI || AWK + help + Enables vi and awk features which allows user to execute + shell commands (using system() C call). + +endmenu diff --git a/editors/Kbuild b/editors/Kbuild deleted file mode 100644 index 76302aa76..000000000 --- a/editors/Kbuild +++ /dev/null @@ -1,14 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_AWK) += awk.o -lib-$(CONFIG_CMP) += cmp.o -lib-$(CONFIG_DIFF) += diff.o -lib-$(CONFIG_ED) += ed.o -lib-$(CONFIG_PATCH) += patch.o -lib-$(CONFIG_SED) += sed.o -lib-$(CONFIG_VI) += vi.o diff --git a/editors/Kbuild.src b/editors/Kbuild.src new file mode 100644 index 000000000..76302aa76 --- /dev/null +++ b/editors/Kbuild.src @@ -0,0 +1,14 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_AWK) += awk.o +lib-$(CONFIG_CMP) += cmp.o +lib-$(CONFIG_DIFF) += diff.o +lib-$(CONFIG_ED) += ed.o +lib-$(CONFIG_PATCH) += patch.o +lib-$(CONFIG_SED) += sed.o +lib-$(CONFIG_VI) += vi.o diff --git a/init/Config.in b/init/Config.in deleted file mode 100644 index 76d509207..000000000 --- a/init/Config.in +++ /dev/null @@ -1,137 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Init Utilities" - -config INIT - bool "init" - default n - select FEATURE_SYSLOG - help - init is the first program run when the system boots. - -config FEATURE_USE_INITTAB - bool "Support reading an inittab file" - default y - depends on INIT - help - Allow init to read an inittab file when the system boot. - -config FEATURE_KILL_REMOVED - bool "Support killing processes that have been removed from inittab" - default y - depends on FEATURE_USE_INITTAB - help - When respawn entries are removed from inittab and a SIGHUP is - sent to init, this feature will kill the processes that have - been removed. - -config FEATURE_KILL_DELAY - int "How long to wait between TERM and KILL (0 - send TERM only)" if FEATURE_KILL_REMOVED - range 0 1024 - default 0 - depends on FEATURE_KILL_REMOVED - help - With nonzero setting, init sends TERM, forks, child waits N - seconds, sends KILL and exits. Setting it too high is unwise - (child will hang around for too long and could actually kill - the wrong process!) - -config FEATURE_INIT_SCTTY - bool "Run commands with leading dash with controlling tty" - default n - depends on INIT - help - If this option is enabled, init will try to give a controlling - tty to any command which has leading hyphen (often it's "-/bin/sh"). - More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)". - If device attached to STDIN_FILENO can be a ctty but is not yet - a ctty for other session, it will become this process' ctty. - This is not the traditional init behavour, but is often what you want - in an embedded system where the console is only accessed during - development or for maintenance. - NB: using cttyhack applet may work better. - -config FEATURE_INIT_SYSLOG - bool "Enable init to write to syslog" - default n - depends on INIT - -config FEATURE_EXTRA_QUIET - bool "Be _extra_ quiet on boot" - default y - depends on INIT - help - Prevent init from logging some messages to the console during boot. - -config FEATURE_INIT_COREDUMPS - bool "Support dumping core for child processes (debugging only)" - default n - depends on INIT - help - If this option is enabled and the file /.init_enable_core - exists, then init will call setrlimit() to allow unlimited - core file sizes. If this option is disabled, processes - will not generate any core files. - -config FEATURE_INITRD - bool "Support running init from within an initrd (not initramfs)" - default y - depends on INIT - help - Legacy support for running init under the old-style initrd. Allows - the name linuxrc to act as init, and it doesn't assume init is PID 1. - - This does not apply to initramfs, which runs /init as PID 1 and - requires no special support. - -config HALT - bool "poweroff, halt, and reboot" - default n - help - Stop all processes and either halt, reboot, or power off the system. - -config FEATURE_CALL_TELINIT - bool "Call telinit on shutdown and reboot" - default n - depends on HALT && !INIT - help - Call an external program (normally telinit) to facilitate - a switch to a proper runlevel. - - This option is only available if you selected halt and friends, - but did not select init. - -config TELINIT_PATH - string "Path to telinit executable" - default "/sbin/telinit" - depends on FEATURE_CALL_TELINIT - help - When busybox halt and friends have to call external telinit - to facilitate proper shutdown, this path is to be used when - locating telinit executable. - -config MESG - bool "mesg" - default n - help - Mesg controls access to your terminal by others. It is typically - used to allow or disallow other users to write to your terminal - -config BOOTCHARTD - bool "bootchartd" - default n - help - bootchartd is commonly used to profile the boot process - for the purpose of speeding it up. In this case, it is started - by the kernel as the init process. This is configured by adding - the init=/sbin/bootchartd option to the kernel command line. - - It can also be used to monitor the resource usage of a specific - application or the running system in general. In this case, - bootchartd is started interactively by running bootchartd start - and stopped using bootchartd stop. - -endmenu diff --git a/init/Config.src b/init/Config.src new file mode 100644 index 000000000..76d509207 --- /dev/null +++ b/init/Config.src @@ -0,0 +1,137 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Init Utilities" + +config INIT + bool "init" + default n + select FEATURE_SYSLOG + help + init is the first program run when the system boots. + +config FEATURE_USE_INITTAB + bool "Support reading an inittab file" + default y + depends on INIT + help + Allow init to read an inittab file when the system boot. + +config FEATURE_KILL_REMOVED + bool "Support killing processes that have been removed from inittab" + default y + depends on FEATURE_USE_INITTAB + help + When respawn entries are removed from inittab and a SIGHUP is + sent to init, this feature will kill the processes that have + been removed. + +config FEATURE_KILL_DELAY + int "How long to wait between TERM and KILL (0 - send TERM only)" if FEATURE_KILL_REMOVED + range 0 1024 + default 0 + depends on FEATURE_KILL_REMOVED + help + With nonzero setting, init sends TERM, forks, child waits N + seconds, sends KILL and exits. Setting it too high is unwise + (child will hang around for too long and could actually kill + the wrong process!) + +config FEATURE_INIT_SCTTY + bool "Run commands with leading dash with controlling tty" + default n + depends on INIT + help + If this option is enabled, init will try to give a controlling + tty to any command which has leading hyphen (often it's "-/bin/sh"). + More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)". + If device attached to STDIN_FILENO can be a ctty but is not yet + a ctty for other session, it will become this process' ctty. + This is not the traditional init behavour, but is often what you want + in an embedded system where the console is only accessed during + development or for maintenance. + NB: using cttyhack applet may work better. + +config FEATURE_INIT_SYSLOG + bool "Enable init to write to syslog" + default n + depends on INIT + +config FEATURE_EXTRA_QUIET + bool "Be _extra_ quiet on boot" + default y + depends on INIT + help + Prevent init from logging some messages to the console during boot. + +config FEATURE_INIT_COREDUMPS + bool "Support dumping core for child processes (debugging only)" + default n + depends on INIT + help + If this option is enabled and the file /.init_enable_core + exists, then init will call setrlimit() to allow unlimited + core file sizes. If this option is disabled, processes + will not generate any core files. + +config FEATURE_INITRD + bool "Support running init from within an initrd (not initramfs)" + default y + depends on INIT + help + Legacy support for running init under the old-style initrd. Allows + the name linuxrc to act as init, and it doesn't assume init is PID 1. + + This does not apply to initramfs, which runs /init as PID 1 and + requires no special support. + +config HALT + bool "poweroff, halt, and reboot" + default n + help + Stop all processes and either halt, reboot, or power off the system. + +config FEATURE_CALL_TELINIT + bool "Call telinit on shutdown and reboot" + default n + depends on HALT && !INIT + help + Call an external program (normally telinit) to facilitate + a switch to a proper runlevel. + + This option is only available if you selected halt and friends, + but did not select init. + +config TELINIT_PATH + string "Path to telinit executable" + default "/sbin/telinit" + depends on FEATURE_CALL_TELINIT + help + When busybox halt and friends have to call external telinit + to facilitate proper shutdown, this path is to be used when + locating telinit executable. + +config MESG + bool "mesg" + default n + help + Mesg controls access to your terminal by others. It is typically + used to allow or disallow other users to write to your terminal + +config BOOTCHARTD + bool "bootchartd" + default n + help + bootchartd is commonly used to profile the boot process + for the purpose of speeding it up. In this case, it is started + by the kernel as the init process. This is configured by adding + the init=/sbin/bootchartd option to the kernel command line. + + It can also be used to monitor the resource usage of a specific + application or the running system in general. In this case, + bootchartd is started interactively by running bootchartd start + and stopped using bootchartd stop. + +endmenu diff --git a/init/Kbuild b/init/Kbuild deleted file mode 100644 index ce3f30256..000000000 --- a/init/Kbuild +++ /dev/null @@ -1,11 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_HALT) += halt.o -lib-$(CONFIG_INIT) += init.o -lib-$(CONFIG_MESG) += mesg.o -lib-$(CONFIG_BOOTCHARTD) += bootchartd.o diff --git a/init/Kbuild.src b/init/Kbuild.src new file mode 100644 index 000000000..ce3f30256 --- /dev/null +++ b/init/Kbuild.src @@ -0,0 +1,11 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_HALT) += halt.o +lib-$(CONFIG_INIT) += init.o +lib-$(CONFIG_MESG) += mesg.o +lib-$(CONFIG_BOOTCHARTD) += bootchartd.o diff --git a/libbb/Config.in b/libbb/Config.in deleted file mode 100644 index 55367b21b..000000000 --- a/libbb/Config.in +++ /dev/null @@ -1,176 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Busybox Library Tuning" - -config PASSWORD_MINLEN - int "Minimum password length" - default 6 - range 5 32 - help - Minimum allowable password length. - -config MD5_SIZE_VS_SPEED - int "MD5: Trade bytes for speed (0:fast, 3:slow)" - default 2 - range 0 3 - help - Trade binary size versus speed for the md5sum algorithm. - Approximate values running uClibc and hashing - linux-2.4.4.tar.bz2 were: - user times (sec) text size (386) - 0 (fastest) 1.1 6144 - 1 1.4 5392 - 2 3.0 5088 - 3 (smallest) 5.1 4912 - -config FEATURE_FAST_TOP - bool "Faster /proc scanning code (+100 bytes)" - default n - help - This option makes top (and ps) ~20% faster (or 20% less CPU hungry), - but code size is slightly bigger. - -config FEATURE_ETC_NETWORKS - bool "Support for /etc/networks" - default n - help - Enable support for network names in /etc/networks. This is - a rarely used feature which allows you to use names - instead of IP/mask pairs in route command. - -config FEATURE_EDITING - bool "Command line editing" - default n - help - Enable line editing (mainly for shell command line). - -config FEATURE_EDITING_MAX_LEN - int "Maximum length of input" - range 128 8192 - default 1024 - depends on FEATURE_EDITING - help - Line editing code uses on-stack buffers for storage. - You may want to decrease this parameter if your target machine - benefits from smaller stack usage. - -config FEATURE_EDITING_VI - bool "vi-style line editing commands" - default n - depends on FEATURE_EDITING - help - Enable vi-style line editing. In shells, this mode can be - turned on and off with "set -o vi" and "set +o vi". - -config FEATURE_EDITING_HISTORY - int "History size" - range 0 99999 - default 15 - depends on FEATURE_EDITING - help - Specify command history size. - -config FEATURE_EDITING_SAVEHISTORY - bool "History saving" - default n - depends on ASH && FEATURE_EDITING - help - Enable history saving in ash shell. - -config FEATURE_TAB_COMPLETION - bool "Tab completion" - default n - depends on FEATURE_EDITING - help - Enable tab completion. - -config FEATURE_USERNAME_COMPLETION - bool "Username completion" - default n - depends on FEATURE_TAB_COMPLETION - help - Enable username completion. - -config FEATURE_EDITING_FANCY_PROMPT - bool "Fancy shell prompts" - default n - depends on FEATURE_EDITING - help - Setting this option allows for prompts to use things like \w and - \$ and escape codes. - -config FEATURE_EDITING_ASK_TERMINAL - bool "Query cursor position from terminal" - default n - depends on FEATURE_EDITING - help - Allow usage of "ESC [ 6 n" sequence. Terminal answers back with - current cursor position. This information is used to make line - editing more robust in some cases. - If you are not sure whether your terminals respond to this code - correctly, or want to save on code size (about 400 bytes), - then do not turn this option on. - -config FEATURE_NON_POSIX_CP - bool "Non-POSIX, but safer, copying to special nodes" - default y - help - With this option, "cp file symlink" will delete symlink - and create a regular file. This does not conform to POSIX, - but prevents a symlink attack. - Similarly, "cp file device" will not send file's data - to the device. - -config FEATURE_VERBOSE_CP_MESSAGE - bool "Give more precise messages when copy fails (cp, mv etc)" - default n - help - Error messages with this feature enabled: - $ cp file /does_not_exist/file - cp: cannot create '/does_not_exist/file': Path does not exist - $ cp file /vmlinuz/file - cp: cannot stat '/vmlinuz/file': Path has non-directory component - If this feature is not enabled, they will be, respectively: - cp: cannot create '/does_not_exist/file': No such file or directory - cp: cannot stat '/vmlinuz/file': Not a directory - This will cost you ~60 bytes. - -config FEATURE_COPYBUF_KB - int "Copy buffer size, in kilobytes" - range 1 1024 - default 4 - help - Size of buffer used by cp, mv, install etc. - Buffers which are 4 kb or less will be allocated on stack. - Bigger buffers will be allocated with mmap, with fallback to 4 kb - stack buffer if mmap fails. - -config MONOTONIC_SYSCALL - bool "Use clock_gettime(CLOCK_MONOTONIC) syscall" - default y - help - Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring - time intervals (time, ping, traceroute etc need this). - Probably requires Linux 2.6+. If not selected, gettimeofday - will be used instead (which gives wrong results if date/time - is reset). - -config IOCTL_HEX2STR_ERROR - bool "Use ioctl names rather than hex values in error messages" - default y - help - Use ioctl names rather than hex values in error messages - (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this - saves about 1400 bytes. - -config FEATURE_HWIB - bool "Support infiniband HW" - default y - help - Support for printing infiniband addresses in - network applets. - -endmenu diff --git a/libbb/Config.src b/libbb/Config.src new file mode 100644 index 000000000..55367b21b --- /dev/null +++ b/libbb/Config.src @@ -0,0 +1,176 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Busybox Library Tuning" + +config PASSWORD_MINLEN + int "Minimum password length" + default 6 + range 5 32 + help + Minimum allowable password length. + +config MD5_SIZE_VS_SPEED + int "MD5: Trade bytes for speed (0:fast, 3:slow)" + default 2 + range 0 3 + help + Trade binary size versus speed for the md5sum algorithm. + Approximate values running uClibc and hashing + linux-2.4.4.tar.bz2 were: + user times (sec) text size (386) + 0 (fastest) 1.1 6144 + 1 1.4 5392 + 2 3.0 5088 + 3 (smallest) 5.1 4912 + +config FEATURE_FAST_TOP + bool "Faster /proc scanning code (+100 bytes)" + default n + help + This option makes top (and ps) ~20% faster (or 20% less CPU hungry), + but code size is slightly bigger. + +config FEATURE_ETC_NETWORKS + bool "Support for /etc/networks" + default n + help + Enable support for network names in /etc/networks. This is + a rarely used feature which allows you to use names + instead of IP/mask pairs in route command. + +config FEATURE_EDITING + bool "Command line editing" + default n + help + Enable line editing (mainly for shell command line). + +config FEATURE_EDITING_MAX_LEN + int "Maximum length of input" + range 128 8192 + default 1024 + depends on FEATURE_EDITING + help + Line editing code uses on-stack buffers for storage. + You may want to decrease this parameter if your target machine + benefits from smaller stack usage. + +config FEATURE_EDITING_VI + bool "vi-style line editing commands" + default n + depends on FEATURE_EDITING + help + Enable vi-style line editing. In shells, this mode can be + turned on and off with "set -o vi" and "set +o vi". + +config FEATURE_EDITING_HISTORY + int "History size" + range 0 99999 + default 15 + depends on FEATURE_EDITING + help + Specify command history size. + +config FEATURE_EDITING_SAVEHISTORY + bool "History saving" + default n + depends on ASH && FEATURE_EDITING + help + Enable history saving in ash shell. + +config FEATURE_TAB_COMPLETION + bool "Tab completion" + default n + depends on FEATURE_EDITING + help + Enable tab completion. + +config FEATURE_USERNAME_COMPLETION + bool "Username completion" + default n + depends on FEATURE_TAB_COMPLETION + help + Enable username completion. + +config FEATURE_EDITING_FANCY_PROMPT + bool "Fancy shell prompts" + default n + depends on FEATURE_EDITING + help + Setting this option allows for prompts to use things like \w and + \$ and escape codes. + +config FEATURE_EDITING_ASK_TERMINAL + bool "Query cursor position from terminal" + default n + depends on FEATURE_EDITING + help + Allow usage of "ESC [ 6 n" sequence. Terminal answers back with + current cursor position. This information is used to make line + editing more robust in some cases. + If you are not sure whether your terminals respond to this code + correctly, or want to save on code size (about 400 bytes), + then do not turn this option on. + +config FEATURE_NON_POSIX_CP + bool "Non-POSIX, but safer, copying to special nodes" + default y + help + With this option, "cp file symlink" will delete symlink + and create a regular file. This does not conform to POSIX, + but prevents a symlink attack. + Similarly, "cp file device" will not send file's data + to the device. + +config FEATURE_VERBOSE_CP_MESSAGE + bool "Give more precise messages when copy fails (cp, mv etc)" + default n + help + Error messages with this feature enabled: + $ cp file /does_not_exist/file + cp: cannot create '/does_not_exist/file': Path does not exist + $ cp file /vmlinuz/file + cp: cannot stat '/vmlinuz/file': Path has non-directory component + If this feature is not enabled, they will be, respectively: + cp: cannot create '/does_not_exist/file': No such file or directory + cp: cannot stat '/vmlinuz/file': Not a directory + This will cost you ~60 bytes. + +config FEATURE_COPYBUF_KB + int "Copy buffer size, in kilobytes" + range 1 1024 + default 4 + help + Size of buffer used by cp, mv, install etc. + Buffers which are 4 kb or less will be allocated on stack. + Bigger buffers will be allocated with mmap, with fallback to 4 kb + stack buffer if mmap fails. + +config MONOTONIC_SYSCALL + bool "Use clock_gettime(CLOCK_MONOTONIC) syscall" + default y + help + Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring + time intervals (time, ping, traceroute etc need this). + Probably requires Linux 2.6+. If not selected, gettimeofday + will be used instead (which gives wrong results if date/time + is reset). + +config IOCTL_HEX2STR_ERROR + bool "Use ioctl names rather than hex values in error messages" + default y + help + Use ioctl names rather than hex values in error messages + (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this + saves about 1400 bytes. + +config FEATURE_HWIB + bool "Support infiniband HW" + default y + help + Support for printing infiniband addresses in + network applets. + +endmenu diff --git a/libbb/Kbuild b/libbb/Kbuild deleted file mode 100644 index 1b11d5d39..000000000 --- a/libbb/Kbuild +++ /dev/null @@ -1,172 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= - -lib-y += appletlib.o -lib-y += ask_confirmation.o -lib-y += bb_askpass.o -lib-y += bb_basename.o -lib-y += bb_do_delay.o -lib-y += bb_pwd.o -lib-y += bb_qsort.o -#lib-y += bb_strtod.o -lib-y += bb_strtonum.o -lib-y += change_identity.o -lib-y += chomp.o -lib-y += compare_string_array.o -lib-y += concat_path_file.o -lib-y += concat_subpath_file.o -lib-y += copy_file.o -lib-y += copyfd.o -lib-y += crc32.o -lib-y += create_icmp6_socket.o -lib-y += create_icmp_socket.o -lib-y += default_error_retval.o -lib-y += device_open.o -lib-y += dump.o -lib-y += error_msg.o -lib-y += error_msg_and_die.o -lib-y += execable.o -lib-y += fclose_nonstdin.o -lib-y += fflush_stdout_and_exit.o -lib-y += fgets_str.o -lib-y += find_pid_by_name.o -lib-y += find_root_device.o -lib-y += full_write.o -lib-y += get_console.o -lib-y += get_last_path_component.o -lib-y += get_line_from_file.o -lib-y += getopt32.o -lib-y += getpty.o -lib-y += get_volsize.o -lib-y += herror_msg.o -lib-y += herror_msg_and_die.o -lib-y += human_readable.o -lib-y += inet_common.o -lib-y += info_msg.o -lib-y += inode_hash.o -lib-y += isdirectory.o -lib-y += kernel_version.o -lib-y += last_char_is.o -lib-y += lineedit.o lineedit_ptr_hack.o -lib-y += llist.o -lib-y += login.o -lib-y += make_directory.o -lib-y += makedev.o -lib-y += match_fstype.o -lib-y += md5.o -# Alternative (disabled) implementation -#lib-y += md5prime.o -lib-y += messages.o -lib-y += mode_string.o -lib-y += mtab_file.o -lib-y += obscure.o -lib-y += parse_mode.o -lib-y += parse_config.o -lib-y += perror_msg.o -lib-y += perror_msg_and_die.o -lib-y += perror_nomsg.o -lib-y += perror_nomsg_and_die.o -lib-y += pidfile.o -lib-y += platform.o -lib-y += printable.o -lib-y += printable_string.o -lib-y += print_flags.o -lib-y += process_escape_sequence.o -lib-y += procps.o -lib-y += progress.o -lib-y += ptr_to_globals.o -lib-y += read.o -lib-y += read_key.o -lib-y += recursive_action.o -lib-y += remove_file.o -lib-y += run_shell.o -lib-y += safe_gethostname.o -lib-y += safe_poll.o -lib-y += safe_strncpy.o -lib-y += safe_write.o -lib-y += setup_environment.o -lib-y += sha1.o -lib-y += signals.o -lib-y += simplify_path.o -lib-y += single_argv.o -lib-y += skip_whitespace.o -lib-y += speed_table.o -lib-y += str_tolower.o -lib-y += strrstr.o -lib-y += time.o -lib-y += trim.o -lib-y += u_signal_names.o -lib-y += udp_io.o -lib-y += uuencode.o -lib-y += vdprintf.o -lib-y += verror_msg.o -lib-y += vfork_daemon_rexec.o -lib-y += warn_ignoring_args.o -lib-y += wfopen.o -lib-y += wfopen_input.o -lib-y += write.o -lib-y += xatonum.o -lib-y += xconnect.o -lib-y += xfuncs.o -lib-y += xfuncs_printf.o -lib-y += xfunc_die.o -lib-y += xgetcwd.o -lib-y += xgethostbyname.o -lib-y += xreadlink.o -lib-y += xrealloc_vector.o - -lib-$(CONFIG_FEATURE_UTMP) += utmp.o - -# A mix of optimizations (why build stuff we know won't be used) -# and objects which may fail to build (SELinux on selinux-less system) -lib-$(CONFIG_SELINUX) += selinux_common.o -lib-$(CONFIG_FEATURE_MTAB_SUPPORT) += mtab.o -lib-$(CONFIG_UNICODE_SUPPORT) += unicode.o -lib-$(CONFIG_FEATURE_CHECK_NAMES) += die_if_bad_username.o - -lib-$(CONFIG_LOSETUP) += loop.o -lib-$(CONFIG_FEATURE_MOUNT_LOOP) += loop.o - -lib-$(CONFIG_ADDGROUP) += update_passwd.o -lib-$(CONFIG_ADDUSER) += update_passwd.o -lib-$(CONFIG_DELGROUP) += update_passwd.o -lib-$(CONFIG_DELUSER) += update_passwd.o - -lib-$(CONFIG_PASSWD) += pw_encrypt.o update_passwd.o -lib-$(CONFIG_CHPASSWD) += pw_encrypt.o update_passwd.o -lib-$(CONFIG_CRYPTPW) += pw_encrypt.o -lib-$(CONFIG_SULOGIN) += pw_encrypt.o -lib-$(CONFIG_VLOCK) += pw_encrypt.o correct_password.o -lib-$(CONFIG_SU) += pw_encrypt.o correct_password.o -lib-$(CONFIG_LOGIN) += pw_encrypt.o correct_password.o -lib-$(CONFIG_FEATURE_HTTPD_AUTH_MD5) += pw_encrypt.o - -lib-$(CONFIG_DF) += find_mount_point.o -lib-$(CONFIG_MKFS_MINIX) += find_mount_point.o -lib-$(CONFIG_MKFS_EXT2) += find_mount_point.o -lib-$(CONFIG_MKFS_REISER) += find_mount_point.o -lib-$(CONFIG_FSCK_MINIX) += find_mount_point.o -lib-$(CONFIG_MOUNT) += find_mount_point.o - -lib-$(CONFIG_HWCLOCK) += rtc.o -lib-$(CONFIG_RTCWAKE) += rtc.o - -# We shouldn't build xregcomp.c if we don't need it - this ensures we don't -# require regex.h to be in the include dir even if we don't need it thereby -# allowing us to build busybox even if uclibc regex support is disabled. - -lib-$(CONFIG_AWK) += xregcomp.o -lib-$(CONFIG_SED) += xregcomp.o -lib-$(CONFIG_GREP) += xregcomp.o -lib-$(CONFIG_EXPR) += xregcomp.o -lib-$(CONFIG_MDEV) += xregcomp.o -lib-$(CONFIG_LESS) += xregcomp.o -lib-$(CONFIG_PGREP) += xregcomp.o -lib-$(CONFIG_PKILL) += xregcomp.o -lib-$(CONFIG_DEVFSD) += xregcomp.o -lib-$(CONFIG_FEATURE_FIND_REGEX) += xregcomp.o diff --git a/libbb/Kbuild.src b/libbb/Kbuild.src new file mode 100644 index 000000000..1b11d5d39 --- /dev/null +++ b/libbb/Kbuild.src @@ -0,0 +1,172 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= + +lib-y += appletlib.o +lib-y += ask_confirmation.o +lib-y += bb_askpass.o +lib-y += bb_basename.o +lib-y += bb_do_delay.o +lib-y += bb_pwd.o +lib-y += bb_qsort.o +#lib-y += bb_strtod.o +lib-y += bb_strtonum.o +lib-y += change_identity.o +lib-y += chomp.o +lib-y += compare_string_array.o +lib-y += concat_path_file.o +lib-y += concat_subpath_file.o +lib-y += copy_file.o +lib-y += copyfd.o +lib-y += crc32.o +lib-y += create_icmp6_socket.o +lib-y += create_icmp_socket.o +lib-y += default_error_retval.o +lib-y += device_open.o +lib-y += dump.o +lib-y += error_msg.o +lib-y += error_msg_and_die.o +lib-y += execable.o +lib-y += fclose_nonstdin.o +lib-y += fflush_stdout_and_exit.o +lib-y += fgets_str.o +lib-y += find_pid_by_name.o +lib-y += find_root_device.o +lib-y += full_write.o +lib-y += get_console.o +lib-y += get_last_path_component.o +lib-y += get_line_from_file.o +lib-y += getopt32.o +lib-y += getpty.o +lib-y += get_volsize.o +lib-y += herror_msg.o +lib-y += herror_msg_and_die.o +lib-y += human_readable.o +lib-y += inet_common.o +lib-y += info_msg.o +lib-y += inode_hash.o +lib-y += isdirectory.o +lib-y += kernel_version.o +lib-y += last_char_is.o +lib-y += lineedit.o lineedit_ptr_hack.o +lib-y += llist.o +lib-y += login.o +lib-y += make_directory.o +lib-y += makedev.o +lib-y += match_fstype.o +lib-y += md5.o +# Alternative (disabled) implementation +#lib-y += md5prime.o +lib-y += messages.o +lib-y += mode_string.o +lib-y += mtab_file.o +lib-y += obscure.o +lib-y += parse_mode.o +lib-y += parse_config.o +lib-y += perror_msg.o +lib-y += perror_msg_and_die.o +lib-y += perror_nomsg.o +lib-y += perror_nomsg_and_die.o +lib-y += pidfile.o +lib-y += platform.o +lib-y += printable.o +lib-y += printable_string.o +lib-y += print_flags.o +lib-y += process_escape_sequence.o +lib-y += procps.o +lib-y += progress.o +lib-y += ptr_to_globals.o +lib-y += read.o +lib-y += read_key.o +lib-y += recursive_action.o +lib-y += remove_file.o +lib-y += run_shell.o +lib-y += safe_gethostname.o +lib-y += safe_poll.o +lib-y += safe_strncpy.o +lib-y += safe_write.o +lib-y += setup_environment.o +lib-y += sha1.o +lib-y += signals.o +lib-y += simplify_path.o +lib-y += single_argv.o +lib-y += skip_whitespace.o +lib-y += speed_table.o +lib-y += str_tolower.o +lib-y += strrstr.o +lib-y += time.o +lib-y += trim.o +lib-y += u_signal_names.o +lib-y += udp_io.o +lib-y += uuencode.o +lib-y += vdprintf.o +lib-y += verror_msg.o +lib-y += vfork_daemon_rexec.o +lib-y += warn_ignoring_args.o +lib-y += wfopen.o +lib-y += wfopen_input.o +lib-y += write.o +lib-y += xatonum.o +lib-y += xconnect.o +lib-y += xfuncs.o +lib-y += xfuncs_printf.o +lib-y += xfunc_die.o +lib-y += xgetcwd.o +lib-y += xgethostbyname.o +lib-y += xreadlink.o +lib-y += xrealloc_vector.o + +lib-$(CONFIG_FEATURE_UTMP) += utmp.o + +# A mix of optimizations (why build stuff we know won't be used) +# and objects which may fail to build (SELinux on selinux-less system) +lib-$(CONFIG_SELINUX) += selinux_common.o +lib-$(CONFIG_FEATURE_MTAB_SUPPORT) += mtab.o +lib-$(CONFIG_UNICODE_SUPPORT) += unicode.o +lib-$(CONFIG_FEATURE_CHECK_NAMES) += die_if_bad_username.o + +lib-$(CONFIG_LOSETUP) += loop.o +lib-$(CONFIG_FEATURE_MOUNT_LOOP) += loop.o + +lib-$(CONFIG_ADDGROUP) += update_passwd.o +lib-$(CONFIG_ADDUSER) += update_passwd.o +lib-$(CONFIG_DELGROUP) += update_passwd.o +lib-$(CONFIG_DELUSER) += update_passwd.o + +lib-$(CONFIG_PASSWD) += pw_encrypt.o update_passwd.o +lib-$(CONFIG_CHPASSWD) += pw_encrypt.o update_passwd.o +lib-$(CONFIG_CRYPTPW) += pw_encrypt.o +lib-$(CONFIG_SULOGIN) += pw_encrypt.o +lib-$(CONFIG_VLOCK) += pw_encrypt.o correct_password.o +lib-$(CONFIG_SU) += pw_encrypt.o correct_password.o +lib-$(CONFIG_LOGIN) += pw_encrypt.o correct_password.o +lib-$(CONFIG_FEATURE_HTTPD_AUTH_MD5) += pw_encrypt.o + +lib-$(CONFIG_DF) += find_mount_point.o +lib-$(CONFIG_MKFS_MINIX) += find_mount_point.o +lib-$(CONFIG_MKFS_EXT2) += find_mount_point.o +lib-$(CONFIG_MKFS_REISER) += find_mount_point.o +lib-$(CONFIG_FSCK_MINIX) += find_mount_point.o +lib-$(CONFIG_MOUNT) += find_mount_point.o + +lib-$(CONFIG_HWCLOCK) += rtc.o +lib-$(CONFIG_RTCWAKE) += rtc.o + +# We shouldn't build xregcomp.c if we don't need it - this ensures we don't +# require regex.h to be in the include dir even if we don't need it thereby +# allowing us to build busybox even if uclibc regex support is disabled. + +lib-$(CONFIG_AWK) += xregcomp.o +lib-$(CONFIG_SED) += xregcomp.o +lib-$(CONFIG_GREP) += xregcomp.o +lib-$(CONFIG_EXPR) += xregcomp.o +lib-$(CONFIG_MDEV) += xregcomp.o +lib-$(CONFIG_LESS) += xregcomp.o +lib-$(CONFIG_PGREP) += xregcomp.o +lib-$(CONFIG_PKILL) += xregcomp.o +lib-$(CONFIG_DEVFSD) += xregcomp.o +lib-$(CONFIG_FEATURE_FIND_REGEX) += xregcomp.o diff --git a/libpwdgrp/Kbuild b/libpwdgrp/Kbuild deleted file mode 100644 index f9f1ddbf3..000000000 --- a/libpwdgrp/Kbuild +++ /dev/null @@ -1,9 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y := uidgid_get.o - -lib-$(CONFIG_USE_BB_PWD_GRP) += pwd_grp.o diff --git a/libpwdgrp/Kbuild.src b/libpwdgrp/Kbuild.src new file mode 100644 index 000000000..f9f1ddbf3 --- /dev/null +++ b/libpwdgrp/Kbuild.src @@ -0,0 +1,9 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y := uidgid_get.o + +lib-$(CONFIG_USE_BB_PWD_GRP) += pwd_grp.o diff --git a/loginutils/Config.in b/loginutils/Config.in deleted file mode 100644 index a9b5f5a9f..000000000 --- a/loginutils/Config.in +++ /dev/null @@ -1,303 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Login/Password Management Utilities" - -config FEATURE_SHADOWPASSWDS - bool "Support for shadow passwords" - default n - help - Build support for shadow password in /etc/shadow. This file is only - readable by root and thus the encrypted passwords are no longer - publicly readable. - -config USE_BB_PWD_GRP - bool "Use internal password and group functions rather than system functions" - default n - help - If you leave this disabled, busybox will use the system's password - and group functions. And if you are using the GNU C library - (glibc), you will then need to install the /etc/nsswitch.conf - configuration file and the required /lib/libnss_* libraries in - order for the password and group functions to work. This generally - makes your embedded system quite a bit larger. - - Enabling this option will cause busybox to directly access the - system's /etc/password, /etc/group files (and your system will be - smaller, and I will get fewer emails asking about how glibc NSS - works). When this option is enabled, you will not be able to use - PAM to access remote LDAP password servers and whatnot. And if you - want hostname resolution to work with glibc, you still need the - /lib/libnss_* libraries. - - If you need to use glibc's nsswitch.conf mechanism - (e.g. if user/group database is NOT stored in /etc/passwd etc), - you must NOT use this option. - - If you enable this option, it will add about 1.5k. - -config USE_BB_SHADOW - bool "Use internal shadow password functions" - default y - depends on USE_BB_PWD_GRP && FEATURE_SHADOWPASSWDS - help - If you leave this disabled, busybox will use the system's shadow - password handling functions. And if you are using the GNU C library - (glibc), you will then need to install the /etc/nsswitch.conf - configuration file and the required /lib/libnss_* libraries in - order for the shadow password functions to work. This generally - makes your embedded system quite a bit larger. - - Enabling this option will cause busybox to directly access the - system's /etc/shadow file when handling shadow passwords. This - makes your system smaller (and I will get fewer emails asking about - how glibc NSS works). When this option is enabled, you will not be - able to use PAM to access shadow passwords from remote LDAP - password servers and whatnot. - -config USE_BB_CRYPT - bool "Use internal crypt functions" - default y - help - Busybox has internal DES and MD5 crypt functions. - They produce results which are identical to corresponding - standard C library functions. - - If you leave this disabled, busybox will use the system's - crypt functions. Most C libraries use large (~70k) - static buffers there, and also combine them with more general - DES encryption/decryption. - - For busybox, having large static buffers is undesirable, - especially on NOMMU machines. Busybox also doesn't need - DES encryption/decryption and can do with smaller code. - - If you enable this option, it will add about 4.8k of code - if you are building dynamically linked executable. - In static build, it makes code _smaller_ by about 1.2k, - and likely many kilobytes less of bss. - -config USE_BB_CRYPT_SHA - bool "Enable SHA256/512 crypt functions" - default n - depends on USE_BB_CRYPT - help - Enable this if you have passwords starting with "$5$" or "$6$" - in your /etc/passwd or /etc/shadow files. These passwords - are hashed using SHA256 and SHA512 algorithms. Support for them - was added to glibc in 2008. - With this option off, login will fail password check for any - user which has password encrypted with these algorithms. - -config ADDGROUP - bool "addgroup" - default n - help - Utility for creating a new group account. - -config FEATURE_ADDGROUP_LONG_OPTIONS - bool "Enable long options" - default n - depends on ADDGROUP && LONG_OPTS - help - Support long options for the addgroup applet. - -config FEATURE_ADDUSER_TO_GROUP - bool "Support for adding users to groups" - default n - depends on ADDGROUP - help - If called with two non-option arguments, - addgroup will add an existing user to an - existing group. - -config DELGROUP - bool "delgroup" - default n - help - Utility for deleting a group account. - -config FEATURE_DEL_USER_FROM_GROUP - bool "Support for removing users from groups" - default n - depends on DELGROUP - help - If called with two non-option arguments, deluser - or delgroup will remove an user from a specified group. - -config FEATURE_CHECK_NAMES - bool "Enable sanity check on user/group names in adduser and addgroup" - default n - depends on ADDUSER || ADDGROUP - help - Enable sanity check on user and group names in adduser and addgroup. - To avoid problems, the user or group name should consist only of - letters, digits, underscores, periods, at signs and dashes, - and not start with a dash (as defined by IEEE Std 1003.1-2001). - For compatibility with Samba machine accounts "$" is also supported - at the end of the user or group name. - -config ADDUSER - bool "adduser" - default n - help - Utility for creating a new user account. - -config FEATURE_ADDUSER_LONG_OPTIONS - bool "Enable long options" - default n - depends on ADDUSER && LONG_OPTS - help - Support long options for the adduser applet. - -config FIRST_SYSTEM_ID - int "First valid system uid or gid for adduser and addgroup" - depends on ADDUSER || ADDGROUP - range 0 64900 - default 100 - help - First valid system uid or gid for adduser and addgroup - -config LAST_SYSTEM_ID - int "Last valid system uid or gid for adduser and addgroup" - depends on ADDUSER || ADDGROUP - range 0 64900 - default 999 - help - Last valid system uid or gid for adduser and addgroup - -config DELUSER - bool "deluser" - default n - help - Utility for deleting a user account. - -config GETTY - bool "getty" - default n - select FEATURE_SYSLOG - help - getty lets you log in on a tty, it is normally invoked by init. - -config LOGIN - bool "login" - default n - select FEATURE_SUID - select FEATURE_SYSLOG - help - login is used when signing onto a system. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config PAM - bool "Support for PAM (Pluggable Authentication Modules)" - default n - depends on LOGIN - help - Use PAM in login(1) instead of direct access to password database. - -config LOGIN_SCRIPTS - bool "Support for login scripts" - depends on LOGIN - default n - help - Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT - just prior to switching from root to logged-in user. - -config FEATURE_NOLOGIN - bool "Support for /etc/nologin" - default y - depends on LOGIN - help - The file /etc/nologin is used by (some versions of) login(1). - If it exists, non-root logins are prohibited. - -config FEATURE_SECURETTY - bool "Support for /etc/securetty" - default y - depends on LOGIN - help - The file /etc/securetty is used by (some versions of) login(1). - The file contains the device names of tty lines (one per line, - without leading /dev/) on which root is allowed to login. - -config PASSWD - bool "passwd" - default n - select FEATURE_SUID - select FEATURE_SYSLOG - help - passwd changes passwords for user and group accounts. A normal user - may only change the password for his/her own account, the super user - may change the password for any account. The administrator of a group - may change the password for the group. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config FEATURE_PASSWD_WEAK_CHECK - bool "Check new passwords for weakness" - default y - depends on PASSWD - help - With this option passwd will refuse new passwords which are "weak". - -config CRYPTPW - bool "cryptpw" - default n - help - Encrypts the given password with the crypt(3) libc function - using the given salt. Debian has this utility under mkpasswd - name. Busybox provides mkpasswd as an alias for cryptpw. - -config CHPASSWD - bool "chpasswd" - default n - help - Reads a file of user name and password pairs from standard input - and uses this information to update a group of existing users. - -config SU - bool "su" - default n - select FEATURE_SUID - select FEATURE_SYSLOG - help - su is used to become another user during a login session. - Invoked without a username, su defaults to becoming the super user. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -config FEATURE_SU_SYSLOG - bool "Enable su to write to syslog" - default y - depends on SU - -config FEATURE_SU_CHECKS_SHELLS - bool "Enable su to check user's shell to be listed in /etc/shells" - depends on SU - default y - -config SULOGIN - bool "sulogin" - default n - select FEATURE_SYSLOG - help - sulogin is invoked when the system goes into single user - mode (this is done through an entry in inittab). - -config VLOCK - bool "vlock" - default n - select FEATURE_SUID - help - Build the "vlock" applet which allows you to lock (virtual) terminals. - - Note that Busybox binary must be setuid root for this applet to - work properly. - -endmenu diff --git a/loginutils/Config.src b/loginutils/Config.src new file mode 100644 index 000000000..a9b5f5a9f --- /dev/null +++ b/loginutils/Config.src @@ -0,0 +1,303 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Login/Password Management Utilities" + +config FEATURE_SHADOWPASSWDS + bool "Support for shadow passwords" + default n + help + Build support for shadow password in /etc/shadow. This file is only + readable by root and thus the encrypted passwords are no longer + publicly readable. + +config USE_BB_PWD_GRP + bool "Use internal password and group functions rather than system functions" + default n + help + If you leave this disabled, busybox will use the system's password + and group functions. And if you are using the GNU C library + (glibc), you will then need to install the /etc/nsswitch.conf + configuration file and the required /lib/libnss_* libraries in + order for the password and group functions to work. This generally + makes your embedded system quite a bit larger. + + Enabling this option will cause busybox to directly access the + system's /etc/password, /etc/group files (and your system will be + smaller, and I will get fewer emails asking about how glibc NSS + works). When this option is enabled, you will not be able to use + PAM to access remote LDAP password servers and whatnot. And if you + want hostname resolution to work with glibc, you still need the + /lib/libnss_* libraries. + + If you need to use glibc's nsswitch.conf mechanism + (e.g. if user/group database is NOT stored in /etc/passwd etc), + you must NOT use this option. + + If you enable this option, it will add about 1.5k. + +config USE_BB_SHADOW + bool "Use internal shadow password functions" + default y + depends on USE_BB_PWD_GRP && FEATURE_SHADOWPASSWDS + help + If you leave this disabled, busybox will use the system's shadow + password handling functions. And if you are using the GNU C library + (glibc), you will then need to install the /etc/nsswitch.conf + configuration file and the required /lib/libnss_* libraries in + order for the shadow password functions to work. This generally + makes your embedded system quite a bit larger. + + Enabling this option will cause busybox to directly access the + system's /etc/shadow file when handling shadow passwords. This + makes your system smaller (and I will get fewer emails asking about + how glibc NSS works). When this option is enabled, you will not be + able to use PAM to access shadow passwords from remote LDAP + password servers and whatnot. + +config USE_BB_CRYPT + bool "Use internal crypt functions" + default y + help + Busybox has internal DES and MD5 crypt functions. + They produce results which are identical to corresponding + standard C library functions. + + If you leave this disabled, busybox will use the system's + crypt functions. Most C libraries use large (~70k) + static buffers there, and also combine them with more general + DES encryption/decryption. + + For busybox, having large static buffers is undesirable, + especially on NOMMU machines. Busybox also doesn't need + DES encryption/decryption and can do with smaller code. + + If you enable this option, it will add about 4.8k of code + if you are building dynamically linked executable. + In static build, it makes code _smaller_ by about 1.2k, + and likely many kilobytes less of bss. + +config USE_BB_CRYPT_SHA + bool "Enable SHA256/512 crypt functions" + default n + depends on USE_BB_CRYPT + help + Enable this if you have passwords starting with "$5$" or "$6$" + in your /etc/passwd or /etc/shadow files. These passwords + are hashed using SHA256 and SHA512 algorithms. Support for them + was added to glibc in 2008. + With this option off, login will fail password check for any + user which has password encrypted with these algorithms. + +config ADDGROUP + bool "addgroup" + default n + help + Utility for creating a new group account. + +config FEATURE_ADDGROUP_LONG_OPTIONS + bool "Enable long options" + default n + depends on ADDGROUP && LONG_OPTS + help + Support long options for the addgroup applet. + +config FEATURE_ADDUSER_TO_GROUP + bool "Support for adding users to groups" + default n + depends on ADDGROUP + help + If called with two non-option arguments, + addgroup will add an existing user to an + existing group. + +config DELGROUP + bool "delgroup" + default n + help + Utility for deleting a group account. + +config FEATURE_DEL_USER_FROM_GROUP + bool "Support for removing users from groups" + default n + depends on DELGROUP + help + If called with two non-option arguments, deluser + or delgroup will remove an user from a specified group. + +config FEATURE_CHECK_NAMES + bool "Enable sanity check on user/group names in adduser and addgroup" + default n + depends on ADDUSER || ADDGROUP + help + Enable sanity check on user and group names in adduser and addgroup. + To avoid problems, the user or group name should consist only of + letters, digits, underscores, periods, at signs and dashes, + and not start with a dash (as defined by IEEE Std 1003.1-2001). + For compatibility with Samba machine accounts "$" is also supported + at the end of the user or group name. + +config ADDUSER + bool "adduser" + default n + help + Utility for creating a new user account. + +config FEATURE_ADDUSER_LONG_OPTIONS + bool "Enable long options" + default n + depends on ADDUSER && LONG_OPTS + help + Support long options for the adduser applet. + +config FIRST_SYSTEM_ID + int "First valid system uid or gid for adduser and addgroup" + depends on ADDUSER || ADDGROUP + range 0 64900 + default 100 + help + First valid system uid or gid for adduser and addgroup + +config LAST_SYSTEM_ID + int "Last valid system uid or gid for adduser and addgroup" + depends on ADDUSER || ADDGROUP + range 0 64900 + default 999 + help + Last valid system uid or gid for adduser and addgroup + +config DELUSER + bool "deluser" + default n + help + Utility for deleting a user account. + +config GETTY + bool "getty" + default n + select FEATURE_SYSLOG + help + getty lets you log in on a tty, it is normally invoked by init. + +config LOGIN + bool "login" + default n + select FEATURE_SUID + select FEATURE_SYSLOG + help + login is used when signing onto a system. + + Note that Busybox binary must be setuid root for this applet to + work properly. + +config PAM + bool "Support for PAM (Pluggable Authentication Modules)" + default n + depends on LOGIN + help + Use PAM in login(1) instead of direct access to password database. + +config LOGIN_SCRIPTS + bool "Support for login scripts" + depends on LOGIN + default n + help + Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT + just prior to switching from root to logged-in user. + +config FEATURE_NOLOGIN + bool "Support for /etc/nologin" + default y + depends on LOGIN + help + The file /etc/nologin is used by (some versions of) login(1). + If it exists, non-root logins are prohibited. + +config FEATURE_SECURETTY + bool "Support for /etc/securetty" + default y + depends on LOGIN + help + The file /etc/securetty is used by (some versions of) login(1). + The file contains the device names of tty lines (one per line, + without leading /dev/) on which root is allowed to login. + +config PASSWD + bool "passwd" + default n + select FEATURE_SUID + select FEATURE_SYSLOG + help + passwd changes passwords for user and group accounts. A normal user + may only change the password for his/her own account, the super user + may change the password for any account. The administrator of a group + may change the password for the group. + + Note that Busybox binary must be setuid root for this applet to + work properly. + +config FEATURE_PASSWD_WEAK_CHECK + bool "Check new passwords for weakness" + default y + depends on PASSWD + help + With this option passwd will refuse new passwords which are "weak". + +config CRYPTPW + bool "cryptpw" + default n + help + Encrypts the given password with the crypt(3) libc function + using the given salt. Debian has this utility under mkpasswd + name. Busybox provides mkpasswd as an alias for cryptpw. + +config CHPASSWD + bool "chpasswd" + default n + help + Reads a file of user name and password pairs from standard input + and uses this information to update a group of existing users. + +config SU + bool "su" + default n + select FEATURE_SUID + select FEATURE_SYSLOG + help + su is used to become another user during a login session. + Invoked without a username, su defaults to becoming the super user. + + Note that Busybox binary must be setuid root for this applet to + work properly. + +config FEATURE_SU_SYSLOG + bool "Enable su to write to syslog" + default y + depends on SU + +config FEATURE_SU_CHECKS_SHELLS + bool "Enable su to check user's shell to be listed in /etc/shells" + depends on SU + default y + +config SULOGIN + bool "sulogin" + default n + select FEATURE_SYSLOG + help + sulogin is invoked when the system goes into single user + mode (this is done through an entry in inittab). + +config VLOCK + bool "vlock" + default n + select FEATURE_SUID + help + Build the "vlock" applet which allows you to lock (virtual) terminals. + + Note that Busybox binary must be setuid root for this applet to + work properly. + +endmenu diff --git a/loginutils/Kbuild b/loginutils/Kbuild deleted file mode 100644 index 3d0d777e8..000000000 --- a/loginutils/Kbuild +++ /dev/null @@ -1,19 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_ADDGROUP) += addgroup.o -lib-$(CONFIG_ADDUSER) += adduser.o -lib-$(CONFIG_CRYPTPW) += cryptpw.o -lib-$(CONFIG_CHPASSWD) += chpasswd.o -lib-$(CONFIG_GETTY) += getty.o -lib-$(CONFIG_LOGIN) += login.o -lib-$(CONFIG_PASSWD) += passwd.o -lib-$(CONFIG_SU) += su.o -lib-$(CONFIG_SULOGIN) += sulogin.o -lib-$(CONFIG_VLOCK) += vlock.o -lib-$(CONFIG_DELUSER) += deluser.o -lib-$(CONFIG_DELGROUP) += deluser.o diff --git a/loginutils/Kbuild.src b/loginutils/Kbuild.src new file mode 100644 index 000000000..3d0d777e8 --- /dev/null +++ b/loginutils/Kbuild.src @@ -0,0 +1,19 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_ADDGROUP) += addgroup.o +lib-$(CONFIG_ADDUSER) += adduser.o +lib-$(CONFIG_CRYPTPW) += cryptpw.o +lib-$(CONFIG_CHPASSWD) += chpasswd.o +lib-$(CONFIG_GETTY) += getty.o +lib-$(CONFIG_LOGIN) += login.o +lib-$(CONFIG_PASSWD) += passwd.o +lib-$(CONFIG_SU) += su.o +lib-$(CONFIG_SULOGIN) += sulogin.o +lib-$(CONFIG_VLOCK) += vlock.o +lib-$(CONFIG_DELUSER) += deluser.o +lib-$(CONFIG_DELGROUP) += deluser.o diff --git a/mailutils/Config.in b/mailutils/Config.in deleted file mode 100644 index 519d562ae..000000000 --- a/mailutils/Config.in +++ /dev/null @@ -1,53 +0,0 @@ -menu "Mail Utilities" - -config MAKEMIME - bool "makemime" - default n - help - Create MIME-formatted messages. - -config FEATURE_MIME_CHARSET - string "Default charset" - default "us-ascii" - depends on MAKEMIME || REFORMIME || SENDMAIL - help - Default charset of the message. - -config POPMAILDIR - bool "popmaildir" - default n - help - Simple yet powerful POP3 mail popper. Delivers content - of remote mailboxes to local Maildir. - -config FEATURE_POPMAILDIR_DELIVERY - bool "Allow message filters and custom delivery program" - default n - depends on POPMAILDIR - help - Allow to use a custom program to filter the content - of the message before actual delivery (-F "prog [args...]"). - Allow to use a custom program for message actual delivery - (-M "prog [args...]"). - -config REFORMIME - bool "reformime" - default n - help - Parse MIME-formatted messages. - -config FEATURE_REFORMIME_COMPAT - bool "Accept and ignore options other than -x and -X" - default y - depends on REFORMIME - help - Accept (for compatibility only) and ignore options - other than -x and -X. - -config SENDMAIL - bool "sendmail" - default n - help - Barebones sendmail. - -endmenu diff --git a/mailutils/Config.src b/mailutils/Config.src new file mode 100644 index 000000000..519d562ae --- /dev/null +++ b/mailutils/Config.src @@ -0,0 +1,53 @@ +menu "Mail Utilities" + +config MAKEMIME + bool "makemime" + default n + help + Create MIME-formatted messages. + +config FEATURE_MIME_CHARSET + string "Default charset" + default "us-ascii" + depends on MAKEMIME || REFORMIME || SENDMAIL + help + Default charset of the message. + +config POPMAILDIR + bool "popmaildir" + default n + help + Simple yet powerful POP3 mail popper. Delivers content + of remote mailboxes to local Maildir. + +config FEATURE_POPMAILDIR_DELIVERY + bool "Allow message filters and custom delivery program" + default n + depends on POPMAILDIR + help + Allow to use a custom program to filter the content + of the message before actual delivery (-F "prog [args...]"). + Allow to use a custom program for message actual delivery + (-M "prog [args...]"). + +config REFORMIME + bool "reformime" + default n + help + Parse MIME-formatted messages. + +config FEATURE_REFORMIME_COMPAT + bool "Accept and ignore options other than -x and -X" + default y + depends on REFORMIME + help + Accept (for compatibility only) and ignore options + other than -x and -X. + +config SENDMAIL + bool "sendmail" + default n + help + Barebones sendmail. + +endmenu diff --git a/mailutils/Kbuild b/mailutils/Kbuild deleted file mode 100644 index 871e87981..000000000 --- a/mailutils/Kbuild +++ /dev/null @@ -1,11 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_MAKEMIME) += mime.o mail.o -lib-$(CONFIG_POPMAILDIR) += popmaildir.o mail.o -lib-$(CONFIG_REFORMIME) += mime.o mail.o -lib-$(CONFIG_SENDMAIL) += sendmail.o mail.o diff --git a/mailutils/Kbuild.src b/mailutils/Kbuild.src new file mode 100644 index 000000000..871e87981 --- /dev/null +++ b/mailutils/Kbuild.src @@ -0,0 +1,11 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_MAKEMIME) += mime.o mail.o +lib-$(CONFIG_POPMAILDIR) += popmaildir.o mail.o +lib-$(CONFIG_REFORMIME) += mime.o mail.o +lib-$(CONFIG_SENDMAIL) += sendmail.o mail.o diff --git a/miscutils/Config.in b/miscutils/Config.in deleted file mode 100644 index 7a69dd10f..000000000 --- a/miscutils/Config.in +++ /dev/null @@ -1,650 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Miscellaneous Utilities" - -config ADJTIMEX - bool "adjtimex" - default n - help - Adjtimex reads and optionally sets adjustment parameters for - the Linux clock adjustment algorithm. - -config BBCONFIG - bool "bbconfig" - default n - help - The bbconfig applet will print the config file with which - busybox was built. - -config BEEP - bool "beep" - default n - help - The beep applets beeps in a given freq/Hz. - -config FEATURE_BEEP_FREQ - int "default frequency" - range 0 2147483647 - default 4000 - depends on BEEP - help - Frequency for default beep. - -config FEATURE_BEEP_LENGTH_MS - int "default length" - range 0 2147483647 - default 30 - depends on BEEP - help - Length in ms for default beep. - -config CHAT - bool "chat" - default n - help - Simple chat utility. - -config FEATURE_CHAT_NOFAIL - bool "Enable NOFAIL expect strings" - depends on CHAT - default y - help - When enabled expect strings which are started with a dash trigger - no-fail mode. That is when expectation is not met within timeout - the script is not terminated but sends next SEND string and waits - for next EXPECT string. This allows to compose far more flexible - scripts. - -config FEATURE_CHAT_TTY_HIFI - bool "Force STDIN to be a TTY" - depends on CHAT - default n - help - Original chat always treats STDIN as a TTY device and sets for it - so-called raw mode. This option turns on such behaviour. - -config FEATURE_CHAT_IMPLICIT_CR - bool "Enable implicit Carriage Return" - depends on CHAT - default y - help - When enabled make chat to terminate all SEND strings with a "\r" - unless "\c" is met anywhere in the string. - -config FEATURE_CHAT_SWALLOW_OPTS - bool "Swallow options" - depends on CHAT - default n - help - Busybox chat require no options. To make it not fail when used - in place of original chat (which has a bunch of options) turn - this on. - -config FEATURE_CHAT_SEND_ESCAPES - bool "Support weird SEND escapes" - depends on CHAT - default n - help - Original chat uses some escape sequences in SEND arguments which - are not sent to device but rather performs special actions. - E.g. "\K" means to send a break sequence to device. - "\d" delays execution for a second, "\p" -- for a 1/100 of second. - Before turning this option on think twice: do you really need them? - -config FEATURE_CHAT_VAR_ABORT_LEN - bool "Support variable-length ABORT conditions" - depends on CHAT - default n - help - Original chat uses fixed 50-bytes length ABORT conditions. Say N here. - -config FEATURE_CHAT_CLR_ABORT - bool "Support revoking of ABORT conditions" - depends on CHAT - default n - help - Support CLR_ABORT directive. - -config CHRT - bool "chrt" - default n - help - manipulate real-time attributes of a process. - This requires sched_{g,s}etparam support in your libc. - -config CROND - bool "crond" - default n - select FEATURE_SUID - select FEATURE_SYSLOG - help - Crond is a background daemon that parses individual crontab - files and executes commands on behalf of the users in question. - This is a port of dcron from slackware. It uses files of the - format /var/spool/cron/crontabs/ files, for example: - $ cat /var/spool/cron/crontabs/root - # Run daily cron jobs at 4:40 every day: - 40 4 * * * /etc/cron/daily > /dev/null 2>&1 - -config FEATURE_CROND_D - bool "Support option -d to redirect output to stderr" - depends on CROND - default n - help - -d sets loglevel to 0 (most verbose) and directs all output to stderr. - -config FEATURE_CROND_CALL_SENDMAIL - bool "Report command output via email (using sendmail)" - default n - depends on CROND - help - Command output will be sent to corresponding user via email. - -config FEATURE_CROND_DIR - string "crond spool directory" - default "/var/spool/cron" - depends on CROND || CRONTAB - help - Location of crond spool. - -config CRONTAB - bool "crontab" - default n - select FEATURE_SUID - help - Crontab manipulates the crontab for a particular user. Only - the superuser may specify a different user and/or crontab directory. - Note that Busybox binary must be setuid root for this applet to - work properly. - -config DC - bool "dc" - default n - help - Dc is a reverse-polish desk calculator which supports unlimited - precision arithmetic. - -config FEATURE_DC_LIBM - bool "Enable power and exp functions (requires libm)" - default n - depends on DC - help - Enable power and exp functions. - NOTE: This will require libm to be present for linking. - -config DEVFSD - bool "devfsd (obsolete)" - default n - select FEATURE_SYSLOG - help - This is deprecated and should NOT be used anymore. - Use linux >= 2.6 (optionally with hotplug) and mdev instead! - See docs/mdev.txt for detailed instructions on how to use mdev - instead. - - Provides compatibility with old device names on a devfs systems. - You should set it to true if you have devfs enabled. - The following keywords in devsfd.conf are supported: - "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE", - "PERMISSIONS", "EXECUTE", "COPY", "IGNORE", - "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". - - But only if they are written UPPERCASE!!!!!!!! - -config DEVFSD_MODLOAD - bool "Adds support for MODLOAD keyword in devsfd.conf" - default n - depends on DEVFSD - help - This actually doesn't work with busybox modutils but needs - the external modutils. - -config DEVFSD_FG_NP - bool "Enables the -fg and -np options" - default n - depends on DEVFSD - help - -fg Run the daemon in the foreground. - -np Exit after parsing the configuration file. - Do not poll for events. - -config DEVFSD_VERBOSE - bool "Increases logging (and size)" - default n - depends on DEVFSD - help - Increases logging to stderr or syslog. - -config FEATURE_DEVFS - bool "Use devfs names for all devices (obsolete)" - default n - help - This is obsolete and should NOT be used anymore. - Use linux >= 2.6 (optionally with hotplug) and mdev instead! - - For legacy systems -- if there is no way around devfsd -- this - tells busybox to look for names like /dev/loop/0 instead of - /dev/loop0. If your /dev directory has normal names instead of - devfs names, you don't want this. - -config DEVMEM - bool "devmem" - default n - help - devmem is a small program that reads and writes from physical - memory using /dev/mem. - -config EJECT - bool "eject" - default n - help - Used to eject cdroms. (defaults to /dev/cdrom) - -config FEATURE_EJECT_SCSI - bool "SCSI support" - default n - depends on EJECT - help - Add the -s option to eject, this allows to eject SCSI-Devices and - usb-storage devices. - -config FBSPLASH - bool "fbsplash" - default n - help - Shows splash image and progress bar on framebuffer device. - Can be used during boot phase of an embedded device. ~2kb. - Usage: - - use kernel option 'vga=xxx' or otherwise enable fb device. - - put somewhere fbsplash.cfg file and an image in .ppm format. - - $ setsid fbsplash [params] & - -c: hide cursor - -d /dev/fbN: framebuffer device (if not /dev/fb0) - -s path_to_image_file (can be "-" for stdin) - -i path_to_cfg_file (can be "-" for stdin) - -f path_to_fifo (can be "-" for stdin) - - if you want to run it only in presence of kernel parameter: - grep -q "fbsplash=on" = 2.6.13 - -config INOTIFYD - bool "inotifyd" - default n - help - Simple inotify daemon. Reports filesystem changes. Requires - kernel >= 2.6.13 - -config LAST - bool "last" - default n - depends on FEATURE_WTMP - help - 'last' displays a list of the last users that logged into the system. - -choice - prompt "Choose last implementation" - depends on LAST - default FEATURE_LAST_SMALL - -config FEATURE_LAST_SMALL - bool "small" - help - This is a small version of last with just the basic set of - features. - -config FEATURE_LAST_FANCY - bool "huge" - help - 'last' displays detailed information about the last users that - logged into the system (mimics sysvinit last). +900 bytes. -endchoice - -config LESS - bool "less" - default n - help - 'less' is a pager, meaning that it displays text files. It possesses - a wide array of features, and is an improvement over 'more'. - -config FEATURE_LESS_MAXLINES - int "Max number of input lines less will try to eat" - default 9999999 - depends on LESS - -config FEATURE_LESS_BRACKETS - bool "Enable bracket searching" - default y - depends on LESS - help - This option adds the capability to search for matching left and right - brackets, facilitating programming. - -config FEATURE_LESS_FLAGS - bool "Enable extra flags" - default y - depends on LESS - help - The extra flags provided do the following: - - The -M flag enables a more sophisticated status line. - The -m flag enables a simpler status line with a percentage. - -config FEATURE_LESS_MARKS - bool "Enable marks" - default n - depends on LESS - help - Marks enable positions in a file to be stored for easy reference. - -config FEATURE_LESS_REGEXP - bool "Enable regular expressions" - default n - depends on LESS - help - Enable regular expressions, allowing complex file searches. - -config FEATURE_LESS_WINCH - bool "Enable automatic resizing on window size changes" - default n - depends on LESS - help - Makes less track window size changes. - -config FEATURE_LESS_DASHCMD - bool "Enable flag changes ('-' command)" - default n - depends on LESS - help - This enables the ability to change command-line flags within - less itself ('-' keyboard command). - -config FEATURE_LESS_LINENUMS - bool "Enable dynamic switching of line numbers" - default n - depends on FEATURE_LESS_DASHCMD - help - Enable "-N" command. - -config HDPARM - bool "hdparm" - default n - help - Get/Set hard drive parameters. Primarily intended for ATA - drives. Adds about 13k (or around 30k if you enable the - FEATURE_HDPARM_GET_IDENTITY option).... - -config FEATURE_HDPARM_GET_IDENTITY - bool "Support obtaining detailed information directly from drives" - default y - depends on HDPARM - help - Enables the -I and -i options to obtain detailed information - directly from drives about their capabilities and supported ATA - feature set. If no device name is specified, hdparm will read - identify data from stdin. Enabling this option will add about 16k... - -config FEATURE_HDPARM_HDIO_SCAN_HWIF - bool "Register an IDE interface (DANGEROUS)" - default n - depends on HDPARM - help - Enables the 'hdparm -R' option to register an IDE interface. - This is dangerous stuff, so you should probably say N. - -config FEATURE_HDPARM_HDIO_UNREGISTER_HWIF - bool "Un-register an IDE interface (DANGEROUS)" - default n - depends on HDPARM - help - Enables the 'hdparm -U' option to un-register an IDE interface. - This is dangerous stuff, so you should probably say N. - -config FEATURE_HDPARM_HDIO_DRIVE_RESET - bool "Perform device reset (DANGEROUS)" - default n - depends on HDPARM - help - Enables the 'hdparm -w' option to perform a device reset. - This is dangerous stuff, so you should probably say N. - -config FEATURE_HDPARM_HDIO_TRISTATE_HWIF - bool "Tristate device for hotswap (DANGEROUS)" - default n - depends on HDPARM - help - Enables the 'hdparm -x' option to tristate device for hotswap, - and the '-b' option to get/set bus state. This is dangerous - stuff, so you should probably say N. - -config FEATURE_HDPARM_HDIO_GETSET_DMA - bool "Get/set using_dma flag" - default n - depends on HDPARM - help - Enables the 'hdparm -d' option to get/set using_dma flag. - -config MAKEDEVS - bool "makedevs" - default n - help - 'makedevs' is a utility used to create a batch of devices with - one command. - . - There are two choices for command line behaviour, the interface - as used by LEAF/Linux Router Project, or a device table file. - . - 'leaf' is traditionally what busybox follows, it allows multiple - devices of a particluar type to be created per command. - e.g. /dev/hda[0-9] - Device properties are passed as command line arguments. - . - 'table' reads device properties from a file or stdin, allowing - a batch of unrelated devices to be made with one command. - User/group names are allowed as an alternative to uid/gid. - -choice - prompt "Choose makedevs behaviour" - depends on MAKEDEVS - default FEATURE_MAKEDEVS_TABLE - -config FEATURE_MAKEDEVS_LEAF - bool "leaf" - -config FEATURE_MAKEDEVS_TABLE - bool "table" - -endchoice - -config MAN - bool "man" - default n - help - Format and display manual pages. - -config MICROCOM - bool "microcom" - default n - help - The poor man's minicom utility for chatting with serial port devices. - -config MOUNTPOINT - bool "mountpoint" - default n - help - mountpoint checks if the directory is a mountpoint. - -config MT - bool "mt" - default n - help - mt is used to control tape devices. You can use the mt utility - to advance or rewind a tape past a specified number of archive - files on the tape. - -config RAIDAUTORUN - bool "raidautorun" - default n - help - raidautorun tells the kernel md driver to - search and start RAID arrays. - -config READAHEAD - bool "readahead" - default n - depends on LFS - help - Preload the files listed on the command line into RAM cache so that - subsequent reads on these files will not block on disk I/O. - - This applet just calls the readahead(2) system call on each file. - It is mainly useful in system startup scripts to preload files - or executables before they are used. When used at the right time - (in particular when a CPU bound process is running) it can - significantly speed up system startup. - - As readahead(2) blocks until each file has been read, it is best to - run this applet as a background job. - -config RFKILL - bool "rfkill" - default n - help - Enable/disable wireless devices. - - rfkill list : list all wireless devices - rfkill list bluetooth : list all bluetooth devices - rfkill list 1 : list device corresponding to the given index - rfkill block|unblock wlan : block/unblock all wlan(wifi) devices - -config RUNLEVEL - bool "runlevel" - default n - help - find the current and previous system runlevel. - - This applet uses utmp but does not rely on busybox supporing - utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc. - -config RX - bool "rx" - default n - help - Receive files using the Xmodem protocol. - -config SETSID - bool "setsid" - default n - help - setsid runs a program in a new session - -config STRINGS - bool "strings" - default n - help - strings prints the printable character sequences for each file - specified. - -config TASKSET - bool "taskset" - default n - help - Retrieve or set a processes's CPU affinity. - This requires sched_{g,s}etaffinity support in your libc. - -config FEATURE_TASKSET_FANCY - bool "Fancy output" - default y - depends on TASKSET - help - Add code for fancy output. This merely silences a compiler-warning - and adds about 135 Bytes. May be needed for machines with alot - of CPUs. - -config TIME - bool "time" - default n - help - The time command runs the specified program with the given arguments. - When the command finishes, time writes a message to standard output - giving timing statistics about this program run. - -config TIMEOUT - bool "timeout" - default n - help - Runs a program and watches it. If it does not terminate in - specified number of seconds, it is sent a signal. - -config TTYSIZE - bool "ttysize" - default n - help - A replacement for "stty size". Unlike stty, can report only width, - only height, or both, in any order. It also does not complain on - error, but returns default 80x24. - Usage in shell scripts: width=`ttysize w`. - -config VOLNAME - bool "volname" - default n - help - Prints a CD-ROM volume name. - -config WALL - bool "wall" - default n - help - Write a message to all users that are logged in. - -config WATCHDOG - bool "watchdog" - default n - help - The watchdog utility is used with hardware or software watchdog - device drivers. It opens the specified watchdog device special file - and periodically writes a magic character to the device. If the - watchdog applet ever fails to write the magic character within a - certain amount of time, the watchdog device assumes the system has - hung, and will cause the hardware to reboot. - -endmenu diff --git a/miscutils/Config.src b/miscutils/Config.src new file mode 100644 index 000000000..7a69dd10f --- /dev/null +++ b/miscutils/Config.src @@ -0,0 +1,650 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Miscellaneous Utilities" + +config ADJTIMEX + bool "adjtimex" + default n + help + Adjtimex reads and optionally sets adjustment parameters for + the Linux clock adjustment algorithm. + +config BBCONFIG + bool "bbconfig" + default n + help + The bbconfig applet will print the config file with which + busybox was built. + +config BEEP + bool "beep" + default n + help + The beep applets beeps in a given freq/Hz. + +config FEATURE_BEEP_FREQ + int "default frequency" + range 0 2147483647 + default 4000 + depends on BEEP + help + Frequency for default beep. + +config FEATURE_BEEP_LENGTH_MS + int "default length" + range 0 2147483647 + default 30 + depends on BEEP + help + Length in ms for default beep. + +config CHAT + bool "chat" + default n + help + Simple chat utility. + +config FEATURE_CHAT_NOFAIL + bool "Enable NOFAIL expect strings" + depends on CHAT + default y + help + When enabled expect strings which are started with a dash trigger + no-fail mode. That is when expectation is not met within timeout + the script is not terminated but sends next SEND string and waits + for next EXPECT string. This allows to compose far more flexible + scripts. + +config FEATURE_CHAT_TTY_HIFI + bool "Force STDIN to be a TTY" + depends on CHAT + default n + help + Original chat always treats STDIN as a TTY device and sets for it + so-called raw mode. This option turns on such behaviour. + +config FEATURE_CHAT_IMPLICIT_CR + bool "Enable implicit Carriage Return" + depends on CHAT + default y + help + When enabled make chat to terminate all SEND strings with a "\r" + unless "\c" is met anywhere in the string. + +config FEATURE_CHAT_SWALLOW_OPTS + bool "Swallow options" + depends on CHAT + default n + help + Busybox chat require no options. To make it not fail when used + in place of original chat (which has a bunch of options) turn + this on. + +config FEATURE_CHAT_SEND_ESCAPES + bool "Support weird SEND escapes" + depends on CHAT + default n + help + Original chat uses some escape sequences in SEND arguments which + are not sent to device but rather performs special actions. + E.g. "\K" means to send a break sequence to device. + "\d" delays execution for a second, "\p" -- for a 1/100 of second. + Before turning this option on think twice: do you really need them? + +config FEATURE_CHAT_VAR_ABORT_LEN + bool "Support variable-length ABORT conditions" + depends on CHAT + default n + help + Original chat uses fixed 50-bytes length ABORT conditions. Say N here. + +config FEATURE_CHAT_CLR_ABORT + bool "Support revoking of ABORT conditions" + depends on CHAT + default n + help + Support CLR_ABORT directive. + +config CHRT + bool "chrt" + default n + help + manipulate real-time attributes of a process. + This requires sched_{g,s}etparam support in your libc. + +config CROND + bool "crond" + default n + select FEATURE_SUID + select FEATURE_SYSLOG + help + Crond is a background daemon that parses individual crontab + files and executes commands on behalf of the users in question. + This is a port of dcron from slackware. It uses files of the + format /var/spool/cron/crontabs/ files, for example: + $ cat /var/spool/cron/crontabs/root + # Run daily cron jobs at 4:40 every day: + 40 4 * * * /etc/cron/daily > /dev/null 2>&1 + +config FEATURE_CROND_D + bool "Support option -d to redirect output to stderr" + depends on CROND + default n + help + -d sets loglevel to 0 (most verbose) and directs all output to stderr. + +config FEATURE_CROND_CALL_SENDMAIL + bool "Report command output via email (using sendmail)" + default n + depends on CROND + help + Command output will be sent to corresponding user via email. + +config FEATURE_CROND_DIR + string "crond spool directory" + default "/var/spool/cron" + depends on CROND || CRONTAB + help + Location of crond spool. + +config CRONTAB + bool "crontab" + default n + select FEATURE_SUID + help + Crontab manipulates the crontab for a particular user. Only + the superuser may specify a different user and/or crontab directory. + Note that Busybox binary must be setuid root for this applet to + work properly. + +config DC + bool "dc" + default n + help + Dc is a reverse-polish desk calculator which supports unlimited + precision arithmetic. + +config FEATURE_DC_LIBM + bool "Enable power and exp functions (requires libm)" + default n + depends on DC + help + Enable power and exp functions. + NOTE: This will require libm to be present for linking. + +config DEVFSD + bool "devfsd (obsolete)" + default n + select FEATURE_SYSLOG + help + This is deprecated and should NOT be used anymore. + Use linux >= 2.6 (optionally with hotplug) and mdev instead! + See docs/mdev.txt for detailed instructions on how to use mdev + instead. + + Provides compatibility with old device names on a devfs systems. + You should set it to true if you have devfs enabled. + The following keywords in devsfd.conf are supported: + "CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE", + "PERMISSIONS", "EXECUTE", "COPY", "IGNORE", + "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". + + But only if they are written UPPERCASE!!!!!!!! + +config DEVFSD_MODLOAD + bool "Adds support for MODLOAD keyword in devsfd.conf" + default n + depends on DEVFSD + help + This actually doesn't work with busybox modutils but needs + the external modutils. + +config DEVFSD_FG_NP + bool "Enables the -fg and -np options" + default n + depends on DEVFSD + help + -fg Run the daemon in the foreground. + -np Exit after parsing the configuration file. + Do not poll for events. + +config DEVFSD_VERBOSE + bool "Increases logging (and size)" + default n + depends on DEVFSD + help + Increases logging to stderr or syslog. + +config FEATURE_DEVFS + bool "Use devfs names for all devices (obsolete)" + default n + help + This is obsolete and should NOT be used anymore. + Use linux >= 2.6 (optionally with hotplug) and mdev instead! + + For legacy systems -- if there is no way around devfsd -- this + tells busybox to look for names like /dev/loop/0 instead of + /dev/loop0. If your /dev directory has normal names instead of + devfs names, you don't want this. + +config DEVMEM + bool "devmem" + default n + help + devmem is a small program that reads and writes from physical + memory using /dev/mem. + +config EJECT + bool "eject" + default n + help + Used to eject cdroms. (defaults to /dev/cdrom) + +config FEATURE_EJECT_SCSI + bool "SCSI support" + default n + depends on EJECT + help + Add the -s option to eject, this allows to eject SCSI-Devices and + usb-storage devices. + +config FBSPLASH + bool "fbsplash" + default n + help + Shows splash image and progress bar on framebuffer device. + Can be used during boot phase of an embedded device. ~2kb. + Usage: + - use kernel option 'vga=xxx' or otherwise enable fb device. + - put somewhere fbsplash.cfg file and an image in .ppm format. + - $ setsid fbsplash [params] & + -c: hide cursor + -d /dev/fbN: framebuffer device (if not /dev/fb0) + -s path_to_image_file (can be "-" for stdin) + -i path_to_cfg_file (can be "-" for stdin) + -f path_to_fifo (can be "-" for stdin) + - if you want to run it only in presence of kernel parameter: + grep -q "fbsplash=on" = 2.6.13 + +config INOTIFYD + bool "inotifyd" + default n + help + Simple inotify daemon. Reports filesystem changes. Requires + kernel >= 2.6.13 + +config LAST + bool "last" + default n + depends on FEATURE_WTMP + help + 'last' displays a list of the last users that logged into the system. + +choice + prompt "Choose last implementation" + depends on LAST + default FEATURE_LAST_SMALL + +config FEATURE_LAST_SMALL + bool "small" + help + This is a small version of last with just the basic set of + features. + +config FEATURE_LAST_FANCY + bool "huge" + help + 'last' displays detailed information about the last users that + logged into the system (mimics sysvinit last). +900 bytes. +endchoice + +config LESS + bool "less" + default n + help + 'less' is a pager, meaning that it displays text files. It possesses + a wide array of features, and is an improvement over 'more'. + +config FEATURE_LESS_MAXLINES + int "Max number of input lines less will try to eat" + default 9999999 + depends on LESS + +config FEATURE_LESS_BRACKETS + bool "Enable bracket searching" + default y + depends on LESS + help + This option adds the capability to search for matching left and right + brackets, facilitating programming. + +config FEATURE_LESS_FLAGS + bool "Enable extra flags" + default y + depends on LESS + help + The extra flags provided do the following: + + The -M flag enables a more sophisticated status line. + The -m flag enables a simpler status line with a percentage. + +config FEATURE_LESS_MARKS + bool "Enable marks" + default n + depends on LESS + help + Marks enable positions in a file to be stored for easy reference. + +config FEATURE_LESS_REGEXP + bool "Enable regular expressions" + default n + depends on LESS + help + Enable regular expressions, allowing complex file searches. + +config FEATURE_LESS_WINCH + bool "Enable automatic resizing on window size changes" + default n + depends on LESS + help + Makes less track window size changes. + +config FEATURE_LESS_DASHCMD + bool "Enable flag changes ('-' command)" + default n + depends on LESS + help + This enables the ability to change command-line flags within + less itself ('-' keyboard command). + +config FEATURE_LESS_LINENUMS + bool "Enable dynamic switching of line numbers" + default n + depends on FEATURE_LESS_DASHCMD + help + Enable "-N" command. + +config HDPARM + bool "hdparm" + default n + help + Get/Set hard drive parameters. Primarily intended for ATA + drives. Adds about 13k (or around 30k if you enable the + FEATURE_HDPARM_GET_IDENTITY option).... + +config FEATURE_HDPARM_GET_IDENTITY + bool "Support obtaining detailed information directly from drives" + default y + depends on HDPARM + help + Enables the -I and -i options to obtain detailed information + directly from drives about their capabilities and supported ATA + feature set. If no device name is specified, hdparm will read + identify data from stdin. Enabling this option will add about 16k... + +config FEATURE_HDPARM_HDIO_SCAN_HWIF + bool "Register an IDE interface (DANGEROUS)" + default n + depends on HDPARM + help + Enables the 'hdparm -R' option to register an IDE interface. + This is dangerous stuff, so you should probably say N. + +config FEATURE_HDPARM_HDIO_UNREGISTER_HWIF + bool "Un-register an IDE interface (DANGEROUS)" + default n + depends on HDPARM + help + Enables the 'hdparm -U' option to un-register an IDE interface. + This is dangerous stuff, so you should probably say N. + +config FEATURE_HDPARM_HDIO_DRIVE_RESET + bool "Perform device reset (DANGEROUS)" + default n + depends on HDPARM + help + Enables the 'hdparm -w' option to perform a device reset. + This is dangerous stuff, so you should probably say N. + +config FEATURE_HDPARM_HDIO_TRISTATE_HWIF + bool "Tristate device for hotswap (DANGEROUS)" + default n + depends on HDPARM + help + Enables the 'hdparm -x' option to tristate device for hotswap, + and the '-b' option to get/set bus state. This is dangerous + stuff, so you should probably say N. + +config FEATURE_HDPARM_HDIO_GETSET_DMA + bool "Get/set using_dma flag" + default n + depends on HDPARM + help + Enables the 'hdparm -d' option to get/set using_dma flag. + +config MAKEDEVS + bool "makedevs" + default n + help + 'makedevs' is a utility used to create a batch of devices with + one command. + . + There are two choices for command line behaviour, the interface + as used by LEAF/Linux Router Project, or a device table file. + . + 'leaf' is traditionally what busybox follows, it allows multiple + devices of a particluar type to be created per command. + e.g. /dev/hda[0-9] + Device properties are passed as command line arguments. + . + 'table' reads device properties from a file or stdin, allowing + a batch of unrelated devices to be made with one command. + User/group names are allowed as an alternative to uid/gid. + +choice + prompt "Choose makedevs behaviour" + depends on MAKEDEVS + default FEATURE_MAKEDEVS_TABLE + +config FEATURE_MAKEDEVS_LEAF + bool "leaf" + +config FEATURE_MAKEDEVS_TABLE + bool "table" + +endchoice + +config MAN + bool "man" + default n + help + Format and display manual pages. + +config MICROCOM + bool "microcom" + default n + help + The poor man's minicom utility for chatting with serial port devices. + +config MOUNTPOINT + bool "mountpoint" + default n + help + mountpoint checks if the directory is a mountpoint. + +config MT + bool "mt" + default n + help + mt is used to control tape devices. You can use the mt utility + to advance or rewind a tape past a specified number of archive + files on the tape. + +config RAIDAUTORUN + bool "raidautorun" + default n + help + raidautorun tells the kernel md driver to + search and start RAID arrays. + +config READAHEAD + bool "readahead" + default n + depends on LFS + help + Preload the files listed on the command line into RAM cache so that + subsequent reads on these files will not block on disk I/O. + + This applet just calls the readahead(2) system call on each file. + It is mainly useful in system startup scripts to preload files + or executables before they are used. When used at the right time + (in particular when a CPU bound process is running) it can + significantly speed up system startup. + + As readahead(2) blocks until each file has been read, it is best to + run this applet as a background job. + +config RFKILL + bool "rfkill" + default n + help + Enable/disable wireless devices. + + rfkill list : list all wireless devices + rfkill list bluetooth : list all bluetooth devices + rfkill list 1 : list device corresponding to the given index + rfkill block|unblock wlan : block/unblock all wlan(wifi) devices + +config RUNLEVEL + bool "runlevel" + default n + help + find the current and previous system runlevel. + + This applet uses utmp but does not rely on busybox supporing + utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc. + +config RX + bool "rx" + default n + help + Receive files using the Xmodem protocol. + +config SETSID + bool "setsid" + default n + help + setsid runs a program in a new session + +config STRINGS + bool "strings" + default n + help + strings prints the printable character sequences for each file + specified. + +config TASKSET + bool "taskset" + default n + help + Retrieve or set a processes's CPU affinity. + This requires sched_{g,s}etaffinity support in your libc. + +config FEATURE_TASKSET_FANCY + bool "Fancy output" + default y + depends on TASKSET + help + Add code for fancy output. This merely silences a compiler-warning + and adds about 135 Bytes. May be needed for machines with alot + of CPUs. + +config TIME + bool "time" + default n + help + The time command runs the specified program with the given arguments. + When the command finishes, time writes a message to standard output + giving timing statistics about this program run. + +config TIMEOUT + bool "timeout" + default n + help + Runs a program and watches it. If it does not terminate in + specified number of seconds, it is sent a signal. + +config TTYSIZE + bool "ttysize" + default n + help + A replacement for "stty size". Unlike stty, can report only width, + only height, or both, in any order. It also does not complain on + error, but returns default 80x24. + Usage in shell scripts: width=`ttysize w`. + +config VOLNAME + bool "volname" + default n + help + Prints a CD-ROM volume name. + +config WALL + bool "wall" + default n + help + Write a message to all users that are logged in. + +config WATCHDOG + bool "watchdog" + default n + help + The watchdog utility is used with hardware or software watchdog + device drivers. It opens the specified watchdog device special file + and periodically writes a magic character to the device. If the + watchdog applet ever fails to write the magic character within a + certain amount of time, the watchdog device assumes the system has + hung, and will cause the hardware to reboot. + +endmenu diff --git a/miscutils/Kbuild b/miscutils/Kbuild deleted file mode 100644 index 3c8ce42ba..000000000 --- a/miscutils/Kbuild +++ /dev/null @@ -1,48 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_ADJTIMEX) += adjtimex.o -lib-$(CONFIG_BBCONFIG) += bbconfig.o -lib-$(CONFIG_BEEP) += beep.o -lib-$(CONFIG_CHAT) += chat.o -lib-$(CONFIG_CHRT) += chrt.o -lib-$(CONFIG_CROND) += crond.o -lib-$(CONFIG_CRONTAB) += crontab.o -lib-$(CONFIG_DC) += dc.o -lib-$(CONFIG_DEVFSD) += devfsd.o -lib-$(CONFIG_DEVMEM) += devmem.o -lib-$(CONFIG_EJECT) += eject.o -lib-$(CONFIG_FBSPLASH) += fbsplash.o -lib-$(CONFIG_FLASHCP) += flashcp.o -lib-$(CONFIG_FLASH_ERASEALL) += flash_eraseall.o -lib-$(CONFIG_FLASH_LOCK) += flash_lock_unlock.o -lib-$(CONFIG_FLASH_UNLOCK) += flash_lock_unlock.o -lib-$(CONFIG_IONICE) += ionice.o -lib-$(CONFIG_HDPARM) += hdparm.o -lib-$(CONFIG_INOTIFYD) += inotifyd.o -lib-$(CONFIG_FEATURE_LAST_SMALL)+= last.o -lib-$(CONFIG_FEATURE_LAST_FANCY)+= last_fancy.o -lib-$(CONFIG_LESS) += less.o -lib-$(CONFIG_MAKEDEVS) += makedevs.o -lib-$(CONFIG_MAN) += man.o -lib-$(CONFIG_MICROCOM) += microcom.o -lib-$(CONFIG_MOUNTPOINT) += mountpoint.o -lib-$(CONFIG_MT) += mt.o -lib-$(CONFIG_RAIDAUTORUN) += raidautorun.o -lib-$(CONFIG_READAHEAD) += readahead.o -lib-$(CONFIG_RFKILL) += rfkill.o -lib-$(CONFIG_RUNLEVEL) += runlevel.o -lib-$(CONFIG_RX) += rx.o -lib-$(CONFIG_SETSID) += setsid.o -lib-$(CONFIG_STRINGS) += strings.o -lib-$(CONFIG_TASKSET) += taskset.o -lib-$(CONFIG_TIME) += time.o -lib-$(CONFIG_TIMEOUT) += timeout.o -lib-$(CONFIG_TTYSIZE) += ttysize.o -lib-$(CONFIG_VOLNAME) += volname.o -lib-$(CONFIG_WALL) += wall.o -lib-$(CONFIG_WATCHDOG) += watchdog.o diff --git a/miscutils/Kbuild.src b/miscutils/Kbuild.src new file mode 100644 index 000000000..3c8ce42ba --- /dev/null +++ b/miscutils/Kbuild.src @@ -0,0 +1,48 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_ADJTIMEX) += adjtimex.o +lib-$(CONFIG_BBCONFIG) += bbconfig.o +lib-$(CONFIG_BEEP) += beep.o +lib-$(CONFIG_CHAT) += chat.o +lib-$(CONFIG_CHRT) += chrt.o +lib-$(CONFIG_CROND) += crond.o +lib-$(CONFIG_CRONTAB) += crontab.o +lib-$(CONFIG_DC) += dc.o +lib-$(CONFIG_DEVFSD) += devfsd.o +lib-$(CONFIG_DEVMEM) += devmem.o +lib-$(CONFIG_EJECT) += eject.o +lib-$(CONFIG_FBSPLASH) += fbsplash.o +lib-$(CONFIG_FLASHCP) += flashcp.o +lib-$(CONFIG_FLASH_ERASEALL) += flash_eraseall.o +lib-$(CONFIG_FLASH_LOCK) += flash_lock_unlock.o +lib-$(CONFIG_FLASH_UNLOCK) += flash_lock_unlock.o +lib-$(CONFIG_IONICE) += ionice.o +lib-$(CONFIG_HDPARM) += hdparm.o +lib-$(CONFIG_INOTIFYD) += inotifyd.o +lib-$(CONFIG_FEATURE_LAST_SMALL)+= last.o +lib-$(CONFIG_FEATURE_LAST_FANCY)+= last_fancy.o +lib-$(CONFIG_LESS) += less.o +lib-$(CONFIG_MAKEDEVS) += makedevs.o +lib-$(CONFIG_MAN) += man.o +lib-$(CONFIG_MICROCOM) += microcom.o +lib-$(CONFIG_MOUNTPOINT) += mountpoint.o +lib-$(CONFIG_MT) += mt.o +lib-$(CONFIG_RAIDAUTORUN) += raidautorun.o +lib-$(CONFIG_READAHEAD) += readahead.o +lib-$(CONFIG_RFKILL) += rfkill.o +lib-$(CONFIG_RUNLEVEL) += runlevel.o +lib-$(CONFIG_RX) += rx.o +lib-$(CONFIG_SETSID) += setsid.o +lib-$(CONFIG_STRINGS) += strings.o +lib-$(CONFIG_TASKSET) += taskset.o +lib-$(CONFIG_TIME) += time.o +lib-$(CONFIG_TIMEOUT) += timeout.o +lib-$(CONFIG_TTYSIZE) += ttysize.o +lib-$(CONFIG_VOLNAME) += volname.o +lib-$(CONFIG_WALL) += wall.o +lib-$(CONFIG_WATCHDOG) += watchdog.o diff --git a/modutils/Config.in b/modutils/Config.in deleted file mode 100644 index 83c12b67f..000000000 --- a/modutils/Config.in +++ /dev/null @@ -1,242 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux Module Utilities" - -config MODPROBE_SMALL - bool "Simplified modutils" - default n - help - Simplified modutils. - - With this option modprobe does not require modules.dep file - and does not use /etc/modules.conf file. - It scans module files in /lib/modules/`uname -r` and - determines dependencies and module alias names on the fly. - This may make module loading slower, most notably - when one needs to load module by alias (this requires - scanning through module _bodies_). - - At the first attempt to load a module by alias modprobe - will try to generate modules.dep.bb file in order to speed up - future loads by alias. Failure to do so (read-only /lib/modules, - etc) is not reported, and future modprobes will be slow too. - - NB: modules.dep.bb file format is not compatible - with modules.dep file as created/used by standard module tools. - - Additional module parameters can be stored in - /etc/modules/$module_name files. - - Apart from modprobe, other utilities are also provided: - - insmod is an alias to modprobe - - rmmod is an alias to modprobe -r - - depmod generates modules.dep.bb - - As of 2008-07, this code is experimental. It is 14kb smaller - than "non-small" modutils. - -config FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE - bool "Accept module options on modprobe command line" - default n - depends on MODPROBE_SMALL - help - Allow insmod and modprobe take module options from command line. - -config FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED - bool "Skip loading of already loaded modules" - default n - depends on MODPROBE_SMALL - help - Check if the module is already loaded. - -config INSMOD - bool "insmod" - default n - depends on !MODPROBE_SMALL - help - insmod is used to load specified modules in the running kernel. - -config RMMOD - bool "rmmod" - default n - depends on !MODPROBE_SMALL - help - rmmod is used to unload specified modules from the kernel. - -config LSMOD - bool "lsmod" - default n - depends on !MODPROBE_SMALL - help - lsmod is used to display a list of loaded modules. - -config FEATURE_LSMOD_PRETTY_2_6_OUTPUT - bool "Pretty output" - default n - depends on LSMOD - help - This option makes output format of lsmod adjusted to - the format of module-init-tools for Linux kernel 2.6. - Increases size somewhat. - -config MODPROBE - bool "modprobe" - default n - depends on !MODPROBE_SMALL - help - Handle the loading of modules, and their dependencies on a high - level. - -config FEATURE_MODPROBE_BLACKLIST - bool "Blacklist support" - default n - depends on MODPROBE - help - Say 'y' here to enable support for the 'blacklist' command in - modprobe.conf. This prevents the alias resolver to resolve - blacklisted modules. This is useful if you want to prevent your - hardware autodetection scripts to load modules like evdev, frame - buffer drivers etc. - -config DEPMOD - bool "depmod" - default n - depends on !MODPROBE_SMALL - help - depmod generates modules.dep (and potentially modules.alias - and modules.symbols) that contain dependency information - for modprobe. - -comment "Options common to multiple modutils" - -config FEATURE_2_4_MODULES - bool "Support version 2.2/2.4 Linux kernels" - default n - depends on INSMOD || RMMOD || LSMOD - help - Support module loading for 2.2.x and 2.4.x Linux kernels. - This increases size considerably. Say N unless you plan - to run ancient kernels. - -config FEATURE_INSMOD_TRY_MMAP - bool "Try to load module from a mmap'ed area" - default n - depends on INSMOD || MODPROBE_SMALL - help - This option causes module loading code to try to mmap - module first. If it does not work (for example, - it does not work for compressed modules), module will be read - (and unpacked if needed) into a memory block allocated by malloc. - - The only case when mmap works but malloc does not is when - you are trying to load a big module on a very memory-constrained - machine. Malloc will momentarily need 2x as much memory as mmap. - - Choosing N saves about 250 bytes of code (on 32-bit x86). - -config FEATURE_INSMOD_VERSION_CHECKING - bool "Enable module version checking" - default n - depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE) - help - Support checking of versions for modules. This is used to - ensure that the kernel and module are made for each other. - -config FEATURE_INSMOD_KSYMOOPS_SYMBOLS - bool "Add module symbols to kernel symbol table" - default n - depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE) - help - By adding module symbols to the kernel symbol table, Oops messages - occuring within kernel modules can be properly debugged. By enabling - this feature, module symbols will always be added to the kernel symbol - table for proper debugging support. If you are not interested in - Oops messages from kernel modules, say N. - -config FEATURE_INSMOD_LOADINKMEM - bool "In kernel memory optimization (uClinux only)" - default n - depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE) - help - This is a special uClinux only memory optimization that lets insmod - load the specified kernel module directly into kernel space, reducing - memory usage by preventing the need for two copies of the module - being loaded into memory. - -config FEATURE_INSMOD_LOAD_MAP - bool "Enable insmod load map (-m) option" - default n - depends on FEATURE_2_4_MODULES && INSMOD - help - Enabling this, one would be able to get a load map - output on stdout. This makes kernel module debugging - easier. - If you don't plan to debug kernel modules, you - don't need this option. - -config FEATURE_INSMOD_LOAD_MAP_FULL - bool "Symbols in load map" - default y - depends on FEATURE_INSMOD_LOAD_MAP && !MODPROBE_SMALL - help - Without this option, -m will only output section - load map. With this option, -m will also output - symbols load map. - -config FEATURE_CHECK_TAINTED_MODULE - bool "Support tainted module checking with new kernels" - default y - depends on (LSMOD || FEATURE_2_4_MODULES) && !MODPROBE_SMALL - help - Support checking for tainted modules. These are usually binary - only modules that will make the linux-kernel list ignore your - support request. - This option is required to support GPLONLY modules. - -config FEATURE_MODUTILS_ALIAS - bool "Support for module.aliases file" - default y - depends on DEPMOD || MODPROBE - help - Generate and parse modules.alias containing aliases for bus - identifiers: - alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs - - and aliases for logical modules names e.g.: - alias padlock_aes aes - alias aes_i586 aes - alias aes_generic aes - - Say Y if unsure. - -config FEATURE_MODUTILS_SYMBOLS - bool "Support for module.symbols file" - default y - depends on DEPMOD || MODPROBE - help - Generate and parse modules.symbols containing aliases for - symbol_request() kernel calls, such as: - alias symbol:usb_sg_init usbcore - - Say Y if unsure. - -config DEFAULT_MODULES_DIR - string "Default directory containing modules" - default "/lib/modules" - depends on DEPMOD || MODPROBE || MODPROBE_SMALL - help - Directory that contains kernel modules. - Defaults to "/lib/modules" - -config DEFAULT_DEPMOD_FILE - string "Default name of modules.dep" - default "modules.dep" - depends on DEPMOD || MODPROBE || MODPROBE_SMALL - help - Filename that contains kernel modules dependencies. - Defaults to "modules.dep" - -endmenu diff --git a/modutils/Config.src b/modutils/Config.src new file mode 100644 index 000000000..83c12b67f --- /dev/null +++ b/modutils/Config.src @@ -0,0 +1,242 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Linux Module Utilities" + +config MODPROBE_SMALL + bool "Simplified modutils" + default n + help + Simplified modutils. + + With this option modprobe does not require modules.dep file + and does not use /etc/modules.conf file. + It scans module files in /lib/modules/`uname -r` and + determines dependencies and module alias names on the fly. + This may make module loading slower, most notably + when one needs to load module by alias (this requires + scanning through module _bodies_). + + At the first attempt to load a module by alias modprobe + will try to generate modules.dep.bb file in order to speed up + future loads by alias. Failure to do so (read-only /lib/modules, + etc) is not reported, and future modprobes will be slow too. + + NB: modules.dep.bb file format is not compatible + with modules.dep file as created/used by standard module tools. + + Additional module parameters can be stored in + /etc/modules/$module_name files. + + Apart from modprobe, other utilities are also provided: + - insmod is an alias to modprobe + - rmmod is an alias to modprobe -r + - depmod generates modules.dep.bb + + As of 2008-07, this code is experimental. It is 14kb smaller + than "non-small" modutils. + +config FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE + bool "Accept module options on modprobe command line" + default n + depends on MODPROBE_SMALL + help + Allow insmod and modprobe take module options from command line. + +config FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED + bool "Skip loading of already loaded modules" + default n + depends on MODPROBE_SMALL + help + Check if the module is already loaded. + +config INSMOD + bool "insmod" + default n + depends on !MODPROBE_SMALL + help + insmod is used to load specified modules in the running kernel. + +config RMMOD + bool "rmmod" + default n + depends on !MODPROBE_SMALL + help + rmmod is used to unload specified modules from the kernel. + +config LSMOD + bool "lsmod" + default n + depends on !MODPROBE_SMALL + help + lsmod is used to display a list of loaded modules. + +config FEATURE_LSMOD_PRETTY_2_6_OUTPUT + bool "Pretty output" + default n + depends on LSMOD + help + This option makes output format of lsmod adjusted to + the format of module-init-tools for Linux kernel 2.6. + Increases size somewhat. + +config MODPROBE + bool "modprobe" + default n + depends on !MODPROBE_SMALL + help + Handle the loading of modules, and their dependencies on a high + level. + +config FEATURE_MODPROBE_BLACKLIST + bool "Blacklist support" + default n + depends on MODPROBE + help + Say 'y' here to enable support for the 'blacklist' command in + modprobe.conf. This prevents the alias resolver to resolve + blacklisted modules. This is useful if you want to prevent your + hardware autodetection scripts to load modules like evdev, frame + buffer drivers etc. + +config DEPMOD + bool "depmod" + default n + depends on !MODPROBE_SMALL + help + depmod generates modules.dep (and potentially modules.alias + and modules.symbols) that contain dependency information + for modprobe. + +comment "Options common to multiple modutils" + +config FEATURE_2_4_MODULES + bool "Support version 2.2/2.4 Linux kernels" + default n + depends on INSMOD || RMMOD || LSMOD + help + Support module loading for 2.2.x and 2.4.x Linux kernels. + This increases size considerably. Say N unless you plan + to run ancient kernels. + +config FEATURE_INSMOD_TRY_MMAP + bool "Try to load module from a mmap'ed area" + default n + depends on INSMOD || MODPROBE_SMALL + help + This option causes module loading code to try to mmap + module first. If it does not work (for example, + it does not work for compressed modules), module will be read + (and unpacked if needed) into a memory block allocated by malloc. + + The only case when mmap works but malloc does not is when + you are trying to load a big module on a very memory-constrained + machine. Malloc will momentarily need 2x as much memory as mmap. + + Choosing N saves about 250 bytes of code (on 32-bit x86). + +config FEATURE_INSMOD_VERSION_CHECKING + bool "Enable module version checking" + default n + depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE) + help + Support checking of versions for modules. This is used to + ensure that the kernel and module are made for each other. + +config FEATURE_INSMOD_KSYMOOPS_SYMBOLS + bool "Add module symbols to kernel symbol table" + default n + depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE) + help + By adding module symbols to the kernel symbol table, Oops messages + occuring within kernel modules can be properly debugged. By enabling + this feature, module symbols will always be added to the kernel symbol + table for proper debugging support. If you are not interested in + Oops messages from kernel modules, say N. + +config FEATURE_INSMOD_LOADINKMEM + bool "In kernel memory optimization (uClinux only)" + default n + depends on FEATURE_2_4_MODULES && (INSMOD || MODPROBE) + help + This is a special uClinux only memory optimization that lets insmod + load the specified kernel module directly into kernel space, reducing + memory usage by preventing the need for two copies of the module + being loaded into memory. + +config FEATURE_INSMOD_LOAD_MAP + bool "Enable insmod load map (-m) option" + default n + depends on FEATURE_2_4_MODULES && INSMOD + help + Enabling this, one would be able to get a load map + output on stdout. This makes kernel module debugging + easier. + If you don't plan to debug kernel modules, you + don't need this option. + +config FEATURE_INSMOD_LOAD_MAP_FULL + bool "Symbols in load map" + default y + depends on FEATURE_INSMOD_LOAD_MAP && !MODPROBE_SMALL + help + Without this option, -m will only output section + load map. With this option, -m will also output + symbols load map. + +config FEATURE_CHECK_TAINTED_MODULE + bool "Support tainted module checking with new kernels" + default y + depends on (LSMOD || FEATURE_2_4_MODULES) && !MODPROBE_SMALL + help + Support checking for tainted modules. These are usually binary + only modules that will make the linux-kernel list ignore your + support request. + This option is required to support GPLONLY modules. + +config FEATURE_MODUTILS_ALIAS + bool "Support for module.aliases file" + default y + depends on DEPMOD || MODPROBE + help + Generate and parse modules.alias containing aliases for bus + identifiers: + alias pcmcia:m*c*f03fn*pfn*pa*pb*pc*pd* parport_cs + + and aliases for logical modules names e.g.: + alias padlock_aes aes + alias aes_i586 aes + alias aes_generic aes + + Say Y if unsure. + +config FEATURE_MODUTILS_SYMBOLS + bool "Support for module.symbols file" + default y + depends on DEPMOD || MODPROBE + help + Generate and parse modules.symbols containing aliases for + symbol_request() kernel calls, such as: + alias symbol:usb_sg_init usbcore + + Say Y if unsure. + +config DEFAULT_MODULES_DIR + string "Default directory containing modules" + default "/lib/modules" + depends on DEPMOD || MODPROBE || MODPROBE_SMALL + help + Directory that contains kernel modules. + Defaults to "/lib/modules" + +config DEFAULT_DEPMOD_FILE + string "Default name of modules.dep" + default "modules.dep" + depends on DEPMOD || MODPROBE || MODPROBE_SMALL + help + Filename that contains kernel modules dependencies. + Defaults to "modules.dep" + +endmenu diff --git a/modutils/Kbuild b/modutils/Kbuild deleted file mode 100644 index 31f7cbf93..000000000 --- a/modutils/Kbuild +++ /dev/null @@ -1,14 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_MODPROBE_SMALL) += modprobe-small.o -lib-$(CONFIG_DEPMOD) += depmod.o modutils.o -lib-$(CONFIG_INSMOD) += insmod.o modutils.o -lib-$(CONFIG_LSMOD) += lsmod.o modutils.o -lib-$(CONFIG_MODPROBE) += modprobe.o modutils.o -lib-$(CONFIG_RMMOD) += rmmod.o modutils.o -lib-$(CONFIG_FEATURE_2_4_MODULES) += modutils-24.o diff --git a/modutils/Kbuild.src b/modutils/Kbuild.src new file mode 100644 index 000000000..31f7cbf93 --- /dev/null +++ b/modutils/Kbuild.src @@ -0,0 +1,14 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_MODPROBE_SMALL) += modprobe-small.o +lib-$(CONFIG_DEPMOD) += depmod.o modutils.o +lib-$(CONFIG_INSMOD) += insmod.o modutils.o +lib-$(CONFIG_LSMOD) += lsmod.o modutils.o +lib-$(CONFIG_MODPROBE) += modprobe.o modutils.o +lib-$(CONFIG_RMMOD) += rmmod.o modutils.o +lib-$(CONFIG_FEATURE_2_4_MODULES) += modutils-24.o diff --git a/networking/Config.in b/networking/Config.in deleted file mode 100644 index ce7166f98..000000000 --- a/networking/Config.in +++ /dev/null @@ -1,1020 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Networking Utilities" - -config FEATURE_IPV6 - bool "Enable IPv6 support" - default n - help - Enable IPv6 support in busybox. - This adds IPv6 support in the networking applets. - -config FEATURE_UNIX_LOCAL - bool "Enable Unix domain socket support (usually not needed)" - default n - help - Enable Unix domain socket support in all busybox networking - applets. Address of the form local:/path/to/unix/socket - will be recognized. - - This extension is almost never used in real world usage. - You most likely want to say N. - -config FEATURE_PREFER_IPV4_ADDRESS - bool "Prefer IPv4 addresses from DNS queries" - default y - depends on FEATURE_IPV6 - help - Use IPv4 address of network host if it has one. - - If this option is off, the first returned address will be used. - This may cause problems when your DNS server is IPv6-capable and - is returning IPv6 host addresses too. If IPv6 address - precedes IPv4 one in DNS reply, busybox network applets - (e.g. wget) will use IPv6 address. On an IPv6-incapable host - or network applets will fail to connect to the host - using IPv6 address. - -config VERBOSE_RESOLUTION_ERRORS - bool "Verbose resolution errors" - default n - help - Enable if you are not satisfied with simplistic - "can't resolve 'hostname.com'" and want to know more. - This may increase size of your executable a bit. - -config ARP - bool "arp" - default n - help - Manipulate the system ARP cache. - -config ARPING - bool "arping" - default n - help - Ping hosts by ARP packets. - -config BRCTL - bool "brctl" - default n - help - Manage ethernet bridges. - Supports addbr/delbr and addif/delif. - -config FEATURE_BRCTL_FANCY - bool "Fancy options" - default n - depends on BRCTL - help - Add support for extended option like: - setageing, setfd, sethello, setmaxage, - setpathcost, setportprio, setbridgeprio, - stp - This adds about 600 bytes. - -config FEATURE_BRCTL_SHOW - bool "Support show, showmac and showstp" - default n - depends on BRCTL && FEATURE_BRCTL_FANCY - help - Add support for option which prints the current config: - showmacs, showstp, show - -config DNSD - bool "dnsd" - default n - help - Small and static DNS server daemon. - -config ETHER_WAKE - bool "ether-wake" - default n - help - Send a magic packet to wake up sleeping machines. - -config FAKEIDENTD - bool "fakeidentd" - default n - select FEATURE_SYSLOG - help - fakeidentd listens on the ident port and returns a predefined - fake value on any query. - -config FTPD - bool "ftpd" - default n - help - simple FTP daemon. You have to run it via inetd. - -config FEATURE_FTP_WRITE - bool "Enable upload commands" - default y - depends on FTPD - help - Enable all kinds of FTP upload commands (-w option) - -config FEATURE_FTPD_ACCEPT_BROKEN_LIST - bool "Enable workaround for RFC-violating clients" - default y - depends on FTPD - help - Some ftp clients (among them KDE's Konqueror) issue illegal - "LIST -l" requests. This option works around such problems. - It might prevent you from listing files starting with "-" and - it increases the code size by ~40 bytes. - Most other ftp servers seem to behave similar to this. - -config FTPGET - bool "ftpget" - default n - help - Retrieve a remote file via FTP. - -config FTPPUT - bool "ftpput" - default n - help - Store a remote file via FTP. - -config FEATURE_FTPGETPUT_LONG_OPTIONS - bool "Enable long options in ftpget/ftpput" - default n - depends on LONG_OPTS && (FTPGET || FTPPUT) - help - Support long options for the ftpget/ftpput applet. - -config HOSTNAME - bool "hostname" - default n - help - Show or set the system's host name. - -config HTTPD - bool "httpd" - default n - help - Serve web pages via an HTTP server. - -config FEATURE_HTTPD_RANGES - bool "Support 'Ranges:' header" - default n - depends on HTTPD - help - Makes httpd emit "Accept-Ranges: bytes" header and understand - "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted - downloads, seeking in multimedia players etc. - -config FEATURE_HTTPD_USE_SENDFILE - bool "Use sendfile system call" - default n - depends on HTTPD - help - When enabled, httpd will use the kernel sendfile() function - instead of read/write loop. - -config FEATURE_HTTPD_SETUID - bool "Enable -u option" - default n - depends on HTTPD - help - This option allows the server to run as a specific user - rather than defaulting to the user that starts the server. - Use of this option requires special privileges to change to a - different user. - -config FEATURE_HTTPD_BASIC_AUTH - bool "Enable Basic http Authentication" - default y - depends on HTTPD - help - Utilizes password settings from /etc/httpd.conf for basic - authentication on a per url basis. - -config FEATURE_HTTPD_AUTH_MD5 - bool "Support MD5 crypted passwords for http Authentication" - default n - depends on FEATURE_HTTPD_BASIC_AUTH - help - Enables basic per URL authentication from /etc/httpd.conf - using md5 passwords. - -config FEATURE_HTTPD_CGI - bool "Support Common Gateway Interface (CGI)" - default y - depends on HTTPD - help - This option allows scripts and executables to be invoked - when specific URLs are requested. - -config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR - bool "Support for running scripts through an interpreter" - default n - depends on FEATURE_HTTPD_CGI - help - This option enables support for running scripts through an - interpreter. Turn this on if you want PHP scripts to work - properly. You need to supply an additional line in your httpd - config file: - *.php:/path/to/your/php - -config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV - bool "Set REMOTE_PORT environment variable for CGI" - default n - depends on FEATURE_HTTPD_CGI - help - Use of this option can assist scripts in generating - references that contain a unique port number. - -config FEATURE_HTTPD_ENCODE_URL_STR - bool "Enable -e option (useful for CGIs written as shell scripts)" - default y - depends on HTTPD - help - This option allows html encoding of arbitrary strings for display - by the browser. Output goes to stdout. - For example, httpd -e "" produces - "<Hello World>". - -config FEATURE_HTTPD_ERROR_PAGES - bool "Support for custom error pages" - default n - depends on HTTPD - help - This option allows you to define custom error pages in - the configuration file instead of the default HTTP status - error pages. For instance, if you add the line: - E404:/path/e404.html - in the config file, the server will respond the specified - '/path/e404.html' file instead of the terse '404 NOT FOUND' - message. - -config FEATURE_HTTPD_PROXY - bool "Support for reverse proxy" - default n - depends on HTTPD - help - This option allows you to define URLs that will be forwarded - to another HTTP server. To setup add the following line to the - configuration file - P:/url/:http://hostname[:port]/new/path/ - Then a request to /url/myfile will be forwarded to - http://hostname[:port]/new/path/myfile. - -config IFCONFIG - bool "ifconfig" - default n - help - Ifconfig is used to configure the kernel-resident network interfaces. - -config FEATURE_IFCONFIG_STATUS - bool "Enable status reporting output (+7k)" - default y - depends on IFCONFIG - help - If ifconfig is called with no arguments it will display the status - of the currently active interfaces. - -config FEATURE_IFCONFIG_SLIP - bool "Enable slip-specific options \"keepalive\" and \"outfill\"" - default n - depends on IFCONFIG - help - Allow "keepalive" and "outfill" support for SLIP. If you're not - planning on using serial lines, leave this unchecked. - -config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ - bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" - default n - depends on IFCONFIG - help - Allow the start address for shared memory, start address for I/O, - and/or the interrupt line used by the specified device. - -config FEATURE_IFCONFIG_HW - bool "Enable option \"hw\" (ether only)" - default y - depends on IFCONFIG - help - Set the hardware address of this interface, if the device driver - supports this operation. Currently, we only support the 'ether' - class. - -config FEATURE_IFCONFIG_BROADCAST_PLUS - bool "Set the broadcast automatically" - default n - depends on IFCONFIG - help - Setting this will make ifconfig attempt to find the broadcast - automatically if the value '+' is used. - -config IFENSLAVE - bool "ifenslave" - default n - help - Userspace application to bind several interfaces - to a logical interface (use with kernel bonding driver). - -config IFPLUGD - bool "ifplugd" - default n - help - Network interface plug detection daemon. - -config IFUPDOWN - bool "ifupdown" - default n - help - Activate or deactivate the specified interfaces. This applet makes - use of either "ifconfig" and "route" or the "ip" command to actually - configure network interfaces. Therefore, you will probably also want - to enable either IFCONFIG and ROUTE, or enable - FEATURE_IFUPDOWN_IP and the various IP options. Of - course you could use non-busybox versions of these programs, so - against my better judgement (since this will surely result in plenty - of support questions on the mailing list), I do not force you to - enable these additional options. It is up to you to supply either - "ifconfig", "route" and "run-parts" or the "ip" command, either - via busybox or via standalone utilities. - -config IFUPDOWN_IFSTATE_PATH - string "Absolute path to ifstate file" - default "/var/run/ifstate" - depends on IFUPDOWN - help - ifupdown keeps state information in a file called ifstate. - Typically it is located in /var/run/ifstate, however - some distributions tend to put it in other places - (debian, for example, uses /etc/network/run/ifstate). - This config option defines location of ifstate. - -config FEATURE_IFUPDOWN_IP - bool "Use ip applet" - default n - depends on IFUPDOWN - help - Use the iproute "ip" command to implement "ifup" and "ifdown", rather - than the default of using the older 'ifconfig' and 'route' utilities. - -config FEATURE_IFUPDOWN_IP_BUILTIN - bool "Use busybox ip applet" - default y - depends on FEATURE_IFUPDOWN_IP - select IP - select FEATURE_IP_ADDRESS - select FEATURE_IP_LINK - select FEATURE_IP_ROUTE - help - Use the busybox iproute "ip" applet to implement "ifupdown". - - If left disabled, you must install the full-blown iproute2 - utility or the "ifup" and "ifdown" applets will not work. - -config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN - bool "Use busybox ifconfig and route applets" - default y - depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP - select IFCONFIG - select ROUTE - help - Use the busybox iproute "ifconfig" and "route" applets to - implement the "ifup" and "ifdown" utilities. - - If left disabled, you must install the full-blown ifconfig - and route utilities, or the "ifup" and "ifdown" applets will not - work. - -config FEATURE_IFUPDOWN_IPV4 - bool "Support for IPv4" - default y - depends on IFUPDOWN - help - If you want ifup/ifdown to talk IPv4, leave this on. - -config FEATURE_IFUPDOWN_IPV6 - bool "Support for IPv6" - default n - depends on IFUPDOWN && FEATURE_IPV6 - help - If you need support for IPv6, turn this option on. - -### UNUSED -###config FEATURE_IFUPDOWN_IPX -### bool "Support for IPX" -### default n -### depends on IFUPDOWN -### help -### If this option is selected you can use busybox to work with IPX -### networks. - -config FEATURE_IFUPDOWN_MAPPING - bool "Enable mapping support" - default n - depends on IFUPDOWN - help - This enables support for the "mapping" stanza, unless you have - a weird network setup you don't need it. - -config FEATURE_IFUPDOWN_EXTERNAL_DHCP - bool "Support for external dhcp clients" - default n - depends on IFUPDOWN - help - This enables support for the external dhcp clients. Clients are - tried in the following order: dhcpcd, dhclient, pump and udhcpc. - Otherwise, if udhcpc applet is enabled, it is used. - Otherwise, ifup/ifdown will have no support for DHCP. - -config INETD - bool "inetd" - default n - select FEATURE_SYSLOG - help - Internet superserver daemon - -config FEATURE_INETD_SUPPORT_BUILTIN_ECHO - bool "Support echo service" - default y - depends on INETD - help - Echo received data internal inetd service - -config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD - bool "Support discard service" - default y - depends on INETD - help - Internet /dev/null internal inetd service - -config FEATURE_INETD_SUPPORT_BUILTIN_TIME - bool "Support time service" - default y - depends on INETD - help - Return 32 bit time since 1900 internal inetd service - -config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME - bool "Support daytime service" - default y - depends on INETD - help - Return human-readable time internal inetd service - -config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN - bool "Support chargen service" - default y - depends on INETD - help - Familiar character generator internal inetd service - -config FEATURE_INETD_RPC - bool "Support RPC services" - default n - depends on INETD - select FEATURE_HAVE_RPC - help - Support Sun-RPC based services - -config IP - bool "ip" - default n - help - The "ip" applet is a TCP/IP interface configuration and routing - utility. You generally don't need "ip" to use busybox with - TCP/IP. - -config FEATURE_IP_ADDRESS - bool "ip address" - default y - depends on IP - help - Address manipulation support for the "ip" applet. - -config FEATURE_IP_LINK - bool "ip link" - default y - depends on IP - help - Configure network devices with "ip". - -config FEATURE_IP_ROUTE - bool "ip route" - default y - depends on IP - help - Add support for routing table management to "ip". - -config FEATURE_IP_TUNNEL - bool "ip tunnel" - default n - depends on IP - help - Add support for tunneling commands to "ip". - -config FEATURE_IP_RULE - bool "ip rule" - default n - depends on IP - help - Add support for rule commands to "ip". - -config FEATURE_IP_SHORT_FORMS - bool "Support short forms of ip commands" - default n - depends on IP - help - Also support short-form of ip commands: - ip addr -> ipaddr - ip link -> iplink - ip route -> iproute - ip tunnel -> iptunnel - ip rule -> iprule - - Say N unless you desparately need the short form of the ip - object commands. - -config FEATURE_IP_RARE_PROTOCOLS - bool "Support displaying rarely used link types" - default n - depends on IP - help - If you are not going to use links of type "frad", "econet", - "bif" etc, you probably don't need to enable this. - Ethernet, wireless, infrared, ppp/slip, ip tunnelling - link types are supported without this option selected. - -config IPADDR - bool - default y - depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ADDRESS - -config IPLINK - bool - default y - depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_LINK - -config IPROUTE - bool - default y - depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ROUTE - -config IPTUNNEL - bool - default y - depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_TUNNEL - -config IPRULE - bool - default y - depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_RULE - -config IPCALC - bool "ipcalc" - default n - help - ipcalc takes an IP address and netmask and calculates the - resulting broadcast, network, and host range. - -config FEATURE_IPCALC_FANCY - bool "Fancy IPCALC, more options, adds 1 kbyte" - default y - depends on IPCALC - help - Adds the options hostname, prefix and silent to the output of - "ipcalc". - -config FEATURE_IPCALC_LONG_OPTIONS - bool "Enable long options" - default n - depends on IPCALC && LONG_OPTS - help - Support long options for the ipcalc applet. - -config NAMEIF - bool "nameif" - default n - select FEATURE_SYSLOG - help - nameif is used to rename network interface by its MAC address. - Renamed interfaces MUST be in the down state. - It is possible to use a file (default: /etc/mactab) - with list of new interface names and MACs. - Maximum interface name length: IFNAMSIZ = 16 - File fields are separated by space or tab. - File format: - # Comment - new_interface_name XX:XX:XX:XX:XX:XX - -config FEATURE_NAMEIF_EXTENDED - bool "Extended nameif" - default n - depends on NAMEIF - help - This extends the nameif syntax to support the bus_info and driver - checks. The syntax is compatible to the normal nameif. - File format: - new_interface_name driver=asix bus=usb-0000:00:08.2-3 - new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 - new_interface_name mac=00:80:C8:38:91:B5 - new_interface_name 00:80:C8:38:91:B5 - -config NC - bool "nc" - default n - help - A simple Unix utility which reads and writes data across network - connections. - -config NC_SERVER - bool "Netcat server options (-l)" - default n - depends on NC - help - Allow netcat to act as a server. - -config NC_EXTRA - bool "Netcat extensions (-eiw and filename)" - default n - depends on NC - help - Add -e (support for executing the rest of the command line after - making or receiving a successful connection), -i (delay interval for - lines sent), -w (timeout for initial connection). - -config NETSTAT - bool "netstat" - default n - help - netstat prints information about the Linux networking subsystem. - -config FEATURE_NETSTAT_WIDE - bool "Enable wide netstat output" - default n - depends on NETSTAT - help - Add support for wide columns. Useful when displaying IPv6 addresses - (-W option). - -config FEATURE_NETSTAT_PRG - bool "Enable PID/Program name output" - default n - depends on NETSTAT - help - Add support for -p flag to print out PID and program name. - +700 bytes of code. - -config NSLOOKUP - bool "nslookup" - default n - help - nslookup is a tool to query Internet name servers. - -config NTPD - bool "ntpd" - default n - help - The NTP client/server daemon. - -config FEATURE_NTPD_SERVER - bool "Make ntpd usable as a NTP server" - default y - depends on NTPD - help - Make ntpd usable as a NTP server. If you disable this option - ntpd will be usable only as a NTP client. - -config PING - bool "ping" - default n - help - ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to - elicit an ICMP ECHO_RESPONSE from a host or gateway. - -config PING6 - bool "ping6" - default n - depends on FEATURE_IPV6 && PING - help - This will give you a ping that can talk IPv6. - -config FEATURE_FANCY_PING - bool "Enable fancy ping output" - default y - depends on PING - help - Make the output from the ping applet include statistics, and at the - same time provide full support for ICMP packets. - -config PSCAN - bool "pscan" - default n - help - Simple network port scanner. - -config ROUTE - bool "route" - default n - help - Route displays or manipulates the kernel's IP routing tables. - -config SLATTACH - bool "slattach" - default n - help - slattach is a small utility to attach network interfaces to serial - lines. - -#config TC -# bool "tc" -# default n -# help -# show / manipulate traffic control settings -# -#config FEATURE_TC_INGRESS -# def_bool n -# depends on TC - -config TCPSVD - bool "tcpsvd" - default n - help - tcpsvd listens on a TCP port and runs a program for each new - connection. - -config TELNET - bool "telnet" - default n - help - Telnet is an interface to the TELNET protocol, but is also commonly - used to test other simple protocols. - -config FEATURE_TELNET_TTYPE - bool "Pass TERM type to remote host" - default y - depends on TELNET - help - Setting this option will forward the TERM environment variable to the - remote host you are connecting to. This is useful to make sure that - things like ANSI colors and other control sequences behave. - -config FEATURE_TELNET_AUTOLOGIN - bool "Pass USER type to remote host" - default y - depends on TELNET - help - Setting this option will forward the USER environment variable to the - remote host you are connecting to. This is useful when you need to - log into a machine without telling the username (autologin). This - option enables `-a' and `-l USER' arguments. - -config TELNETD - bool "telnetd" - default n - select FEATURE_SYSLOG - help - A daemon for the TELNET protocol, allowing you to log onto the host - running the daemon. Please keep in mind that the TELNET protocol - sends passwords in plain text. If you can't afford the space for an - SSH daemon and you trust your network, you may say 'y' here. As a - more secure alternative, you should seriously consider installing the - very small Dropbear SSH daemon instead: - http://matt.ucc.asn.au/dropbear/dropbear.html - - Note that for busybox telnetd to work you need several things: - First of all, your kernel needs: - UNIX98_PTYS=y - DEVPTS_FS=y - - Next, you need a /dev/pts directory on your root filesystem: - - $ ls -ld /dev/pts - drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/ - - Next you need the pseudo terminal master multiplexer /dev/ptmx: - - $ ls -la /dev/ptmx - crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx - - Any /dev/ttyp[0-9]* files you may have can be removed. - Next, you need to mount the devpts filesystem on /dev/pts using: - - mount -t devpts devpts /dev/pts - - You need to be sure that Busybox has LOGIN and - FEATURE_SUID enabled. And finally, you should make - certain that Busybox has been installed setuid root: - - chown root.root /bin/busybox - chmod 4755 /bin/busybox - - with all that done, telnetd _should_ work.... - - -config FEATURE_TELNETD_STANDALONE - bool "Support standalone telnetd (not inetd only)" - default n - depends on TELNETD - help - Selecting this will make telnetd able to run standalone. - -config FEATURE_TELNETD_INETD_WAIT - bool "Support -w SEC option (inetd wait mode)" - default n - depends on FEATURE_TELNETD_STANDALONE - help - This option allows you to run telnetd in "inet wait" mode. - Example inetd.conf line (note "wait", not usual "nowait"): - - telnet stream tcp wait root /bin/telnetd telnetd -w10 - - In this example, inetd passes _listening_ socket_ as fd 0 - to telnetd when connection appears. - telnetd will wait for connections until all existing - connections are closed, and no new connections - appear during 10 seconds. Then it exits, and inetd continues - to listen for new connections. - - This option is rarely used. "tcp nowait" is much more usual - way of running tcp services, including telnetd. - You most probably want to say N here. - -config TFTP - bool "tftp" - default n - help - This enables the Trivial File Transfer Protocol client program. TFTP - is usually used for simple, small transfers such as a root image - for a network-enabled bootloader. - -config TFTPD - bool "tftpd" - default n - help - This enables the Trivial File Transfer Protocol server program. - It expects that stdin is a datagram socket and a packet - is already pending on it. It will exit after one transfer. - In other words: it should be run from inetd in nowait mode, - or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" - -config FEATURE_TFTP_GET - bool "Enable 'tftp get' and/or tftpd upload code" - default y - depends on TFTP || TFTPD - help - Add support for the GET command within the TFTP client. This allows - a client to retrieve a file from a TFTP server. - Also enable upload support in tftpd, if tftpd is selected. - - Note: this option does _not_ make tftpd capable of download - (the usual operation people need from it)! - -config FEATURE_TFTP_PUT - bool "Enable 'tftp put' and/or tftpd download code" - default y - depends on TFTP || TFTPD - help - Add support for the PUT command within the TFTP client. This allows - a client to transfer a file to a TFTP server. - Also enable download support in tftpd, if tftpd is selected. - -config FEATURE_TFTP_BLOCKSIZE - bool "Enable 'blksize' and 'tsize' protocol options" - default n - depends on TFTP || TFTPD - help - Allow tftp to specify block size, and tftpd to understand - "blksize" and "tsize" options. - -config FEATURE_TFTP_PROGRESS_BAR - bool "Enable tftp progress meter" - default n - depends on TFTP && FEATURE_TFTP_BLOCKSIZE - help - Show progress bar. - -config TFTP_DEBUG - bool "Enable debug" - default n - depends on TFTP || TFTPD - help - Make tftp[d] print debugging messages on stderr. - This is useful if you are diagnosing a bug in tftp[d]. - -config TRACEROUTE - bool "traceroute" - default n - help - Utility to trace the route of IP packets. - -config TRACEROUTE6 - bool "traceroute6" - default n - depends on FEATURE_IPV6 && TRACEROUTE - help - Utility to trace the route of IPv6 packets. - -config FEATURE_TRACEROUTE_VERBOSE - bool "Enable verbose output" - default n - depends on TRACEROUTE - help - Add some verbosity to traceroute. This includes among other things - hostnames and ICMP response types. - -config FEATURE_TRACEROUTE_SOURCE_ROUTE - bool "Enable loose source route" - default n - depends on TRACEROUTE - help - Add option to specify a loose source route gateway - (8 maximum). - -config FEATURE_TRACEROUTE_USE_ICMP - bool "Use ICMP instead of UDP" - default n - depends on TRACEROUTE - help - Add option -I to use ICMP ECHO instead of UDP datagrams. - -config TUNCTL - bool "tunctl" - default n - help - tunctl creates or deletes tun devices. - -config FEATURE_TUNCTL_UG - bool "Support owner:group assignment" - default n - depends on TUNCTL - help - Allow to specify owner and group of newly created interface. - 340 bytes of pure bloat. Say no here. - -source networking/udhcp/Config.in - -config IFUPDOWN_UDHCPC_CMD_OPTIONS - string "ifup udhcpc command line options" - default "-R -n" - depends on IFUPDOWN && UDHCPC - help - Command line options to pass to udhcpc from ifup. - Intended to alter options not available in /etc/network/interfaces. - (IE: --syslog --background etc...) - -config UDPSVD - bool "udpsvd" - default n - help - udpsvd listens on an UDP port and runs a program for each new - connection. - -config VCONFIG - bool "vconfig" - default n - help - Creates, removes, and configures VLAN interfaces - -config WGET - bool "wget" - default n - help - wget is a utility for non-interactive download of files from HTTP, - HTTPS, and FTP servers. - -config FEATURE_WGET_STATUSBAR - bool "Enable a nifty process meter (+2k)" - default y - depends on WGET - help - Enable the transfer progress bar for wget transfers. - -config FEATURE_WGET_AUTHENTICATION - bool "Enable HTTP authentication" - default y - depends on WGET - help - Support authenticated HTTP transfers. - -config FEATURE_WGET_LONG_OPTIONS - bool "Enable long options" - default n - depends on WGET && LONG_OPTS - help - Support long options for the wget applet. - -config ZCIP - bool "zcip" - default n - select FEATURE_SYSLOG - help - ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. - It's a daemon that allocates and defends a dynamically assigned - address on the 169.254/16 network, requiring no system administrator. - - See http://www.zeroconf.org for further details, and "zcip.script" - in the busybox examples. - -endmenu diff --git a/networking/Config.src b/networking/Config.src new file mode 100644 index 000000000..ce7166f98 --- /dev/null +++ b/networking/Config.src @@ -0,0 +1,1020 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Networking Utilities" + +config FEATURE_IPV6 + bool "Enable IPv6 support" + default n + help + Enable IPv6 support in busybox. + This adds IPv6 support in the networking applets. + +config FEATURE_UNIX_LOCAL + bool "Enable Unix domain socket support (usually not needed)" + default n + help + Enable Unix domain socket support in all busybox networking + applets. Address of the form local:/path/to/unix/socket + will be recognized. + + This extension is almost never used in real world usage. + You most likely want to say N. + +config FEATURE_PREFER_IPV4_ADDRESS + bool "Prefer IPv4 addresses from DNS queries" + default y + depends on FEATURE_IPV6 + help + Use IPv4 address of network host if it has one. + + If this option is off, the first returned address will be used. + This may cause problems when your DNS server is IPv6-capable and + is returning IPv6 host addresses too. If IPv6 address + precedes IPv4 one in DNS reply, busybox network applets + (e.g. wget) will use IPv6 address. On an IPv6-incapable host + or network applets will fail to connect to the host + using IPv6 address. + +config VERBOSE_RESOLUTION_ERRORS + bool "Verbose resolution errors" + default n + help + Enable if you are not satisfied with simplistic + "can't resolve 'hostname.com'" and want to know more. + This may increase size of your executable a bit. + +config ARP + bool "arp" + default n + help + Manipulate the system ARP cache. + +config ARPING + bool "arping" + default n + help + Ping hosts by ARP packets. + +config BRCTL + bool "brctl" + default n + help + Manage ethernet bridges. + Supports addbr/delbr and addif/delif. + +config FEATURE_BRCTL_FANCY + bool "Fancy options" + default n + depends on BRCTL + help + Add support for extended option like: + setageing, setfd, sethello, setmaxage, + setpathcost, setportprio, setbridgeprio, + stp + This adds about 600 bytes. + +config FEATURE_BRCTL_SHOW + bool "Support show, showmac and showstp" + default n + depends on BRCTL && FEATURE_BRCTL_FANCY + help + Add support for option which prints the current config: + showmacs, showstp, show + +config DNSD + bool "dnsd" + default n + help + Small and static DNS server daemon. + +config ETHER_WAKE + bool "ether-wake" + default n + help + Send a magic packet to wake up sleeping machines. + +config FAKEIDENTD + bool "fakeidentd" + default n + select FEATURE_SYSLOG + help + fakeidentd listens on the ident port and returns a predefined + fake value on any query. + +config FTPD + bool "ftpd" + default n + help + simple FTP daemon. You have to run it via inetd. + +config FEATURE_FTP_WRITE + bool "Enable upload commands" + default y + depends on FTPD + help + Enable all kinds of FTP upload commands (-w option) + +config FEATURE_FTPD_ACCEPT_BROKEN_LIST + bool "Enable workaround for RFC-violating clients" + default y + depends on FTPD + help + Some ftp clients (among them KDE's Konqueror) issue illegal + "LIST -l" requests. This option works around such problems. + It might prevent you from listing files starting with "-" and + it increases the code size by ~40 bytes. + Most other ftp servers seem to behave similar to this. + +config FTPGET + bool "ftpget" + default n + help + Retrieve a remote file via FTP. + +config FTPPUT + bool "ftpput" + default n + help + Store a remote file via FTP. + +config FEATURE_FTPGETPUT_LONG_OPTIONS + bool "Enable long options in ftpget/ftpput" + default n + depends on LONG_OPTS && (FTPGET || FTPPUT) + help + Support long options for the ftpget/ftpput applet. + +config HOSTNAME + bool "hostname" + default n + help + Show or set the system's host name. + +config HTTPD + bool "httpd" + default n + help + Serve web pages via an HTTP server. + +config FEATURE_HTTPD_RANGES + bool "Support 'Ranges:' header" + default n + depends on HTTPD + help + Makes httpd emit "Accept-Ranges: bytes" header and understand + "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted + downloads, seeking in multimedia players etc. + +config FEATURE_HTTPD_USE_SENDFILE + bool "Use sendfile system call" + default n + depends on HTTPD + help + When enabled, httpd will use the kernel sendfile() function + instead of read/write loop. + +config FEATURE_HTTPD_SETUID + bool "Enable -u option" + default n + depends on HTTPD + help + This option allows the server to run as a specific user + rather than defaulting to the user that starts the server. + Use of this option requires special privileges to change to a + different user. + +config FEATURE_HTTPD_BASIC_AUTH + bool "Enable Basic http Authentication" + default y + depends on HTTPD + help + Utilizes password settings from /etc/httpd.conf for basic + authentication on a per url basis. + +config FEATURE_HTTPD_AUTH_MD5 + bool "Support MD5 crypted passwords for http Authentication" + default n + depends on FEATURE_HTTPD_BASIC_AUTH + help + Enables basic per URL authentication from /etc/httpd.conf + using md5 passwords. + +config FEATURE_HTTPD_CGI + bool "Support Common Gateway Interface (CGI)" + default y + depends on HTTPD + help + This option allows scripts and executables to be invoked + when specific URLs are requested. + +config FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR + bool "Support for running scripts through an interpreter" + default n + depends on FEATURE_HTTPD_CGI + help + This option enables support for running scripts through an + interpreter. Turn this on if you want PHP scripts to work + properly. You need to supply an additional line in your httpd + config file: + *.php:/path/to/your/php + +config FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV + bool "Set REMOTE_PORT environment variable for CGI" + default n + depends on FEATURE_HTTPD_CGI + help + Use of this option can assist scripts in generating + references that contain a unique port number. + +config FEATURE_HTTPD_ENCODE_URL_STR + bool "Enable -e option (useful for CGIs written as shell scripts)" + default y + depends on HTTPD + help + This option allows html encoding of arbitrary strings for display + by the browser. Output goes to stdout. + For example, httpd -e "" produces + "<Hello World>". + +config FEATURE_HTTPD_ERROR_PAGES + bool "Support for custom error pages" + default n + depends on HTTPD + help + This option allows you to define custom error pages in + the configuration file instead of the default HTTP status + error pages. For instance, if you add the line: + E404:/path/e404.html + in the config file, the server will respond the specified + '/path/e404.html' file instead of the terse '404 NOT FOUND' + message. + +config FEATURE_HTTPD_PROXY + bool "Support for reverse proxy" + default n + depends on HTTPD + help + This option allows you to define URLs that will be forwarded + to another HTTP server. To setup add the following line to the + configuration file + P:/url/:http://hostname[:port]/new/path/ + Then a request to /url/myfile will be forwarded to + http://hostname[:port]/new/path/myfile. + +config IFCONFIG + bool "ifconfig" + default n + help + Ifconfig is used to configure the kernel-resident network interfaces. + +config FEATURE_IFCONFIG_STATUS + bool "Enable status reporting output (+7k)" + default y + depends on IFCONFIG + help + If ifconfig is called with no arguments it will display the status + of the currently active interfaces. + +config FEATURE_IFCONFIG_SLIP + bool "Enable slip-specific options \"keepalive\" and \"outfill\"" + default n + depends on IFCONFIG + help + Allow "keepalive" and "outfill" support for SLIP. If you're not + planning on using serial lines, leave this unchecked. + +config FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ + bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" + default n + depends on IFCONFIG + help + Allow the start address for shared memory, start address for I/O, + and/or the interrupt line used by the specified device. + +config FEATURE_IFCONFIG_HW + bool "Enable option \"hw\" (ether only)" + default y + depends on IFCONFIG + help + Set the hardware address of this interface, if the device driver + supports this operation. Currently, we only support the 'ether' + class. + +config FEATURE_IFCONFIG_BROADCAST_PLUS + bool "Set the broadcast automatically" + default n + depends on IFCONFIG + help + Setting this will make ifconfig attempt to find the broadcast + automatically if the value '+' is used. + +config IFENSLAVE + bool "ifenslave" + default n + help + Userspace application to bind several interfaces + to a logical interface (use with kernel bonding driver). + +config IFPLUGD + bool "ifplugd" + default n + help + Network interface plug detection daemon. + +config IFUPDOWN + bool "ifupdown" + default n + help + Activate or deactivate the specified interfaces. This applet makes + use of either "ifconfig" and "route" or the "ip" command to actually + configure network interfaces. Therefore, you will probably also want + to enable either IFCONFIG and ROUTE, or enable + FEATURE_IFUPDOWN_IP and the various IP options. Of + course you could use non-busybox versions of these programs, so + against my better judgement (since this will surely result in plenty + of support questions on the mailing list), I do not force you to + enable these additional options. It is up to you to supply either + "ifconfig", "route" and "run-parts" or the "ip" command, either + via busybox or via standalone utilities. + +config IFUPDOWN_IFSTATE_PATH + string "Absolute path to ifstate file" + default "/var/run/ifstate" + depends on IFUPDOWN + help + ifupdown keeps state information in a file called ifstate. + Typically it is located in /var/run/ifstate, however + some distributions tend to put it in other places + (debian, for example, uses /etc/network/run/ifstate). + This config option defines location of ifstate. + +config FEATURE_IFUPDOWN_IP + bool "Use ip applet" + default n + depends on IFUPDOWN + help + Use the iproute "ip" command to implement "ifup" and "ifdown", rather + than the default of using the older 'ifconfig' and 'route' utilities. + +config FEATURE_IFUPDOWN_IP_BUILTIN + bool "Use busybox ip applet" + default y + depends on FEATURE_IFUPDOWN_IP + select IP + select FEATURE_IP_ADDRESS + select FEATURE_IP_LINK + select FEATURE_IP_ROUTE + help + Use the busybox iproute "ip" applet to implement "ifupdown". + + If left disabled, you must install the full-blown iproute2 + utility or the "ifup" and "ifdown" applets will not work. + +config FEATURE_IFUPDOWN_IFCONFIG_BUILTIN + bool "Use busybox ifconfig and route applets" + default y + depends on IFUPDOWN && !FEATURE_IFUPDOWN_IP + select IFCONFIG + select ROUTE + help + Use the busybox iproute "ifconfig" and "route" applets to + implement the "ifup" and "ifdown" utilities. + + If left disabled, you must install the full-blown ifconfig + and route utilities, or the "ifup" and "ifdown" applets will not + work. + +config FEATURE_IFUPDOWN_IPV4 + bool "Support for IPv4" + default y + depends on IFUPDOWN + help + If you want ifup/ifdown to talk IPv4, leave this on. + +config FEATURE_IFUPDOWN_IPV6 + bool "Support for IPv6" + default n + depends on IFUPDOWN && FEATURE_IPV6 + help + If you need support for IPv6, turn this option on. + +### UNUSED +###config FEATURE_IFUPDOWN_IPX +### bool "Support for IPX" +### default n +### depends on IFUPDOWN +### help +### If this option is selected you can use busybox to work with IPX +### networks. + +config FEATURE_IFUPDOWN_MAPPING + bool "Enable mapping support" + default n + depends on IFUPDOWN + help + This enables support for the "mapping" stanza, unless you have + a weird network setup you don't need it. + +config FEATURE_IFUPDOWN_EXTERNAL_DHCP + bool "Support for external dhcp clients" + default n + depends on IFUPDOWN + help + This enables support for the external dhcp clients. Clients are + tried in the following order: dhcpcd, dhclient, pump and udhcpc. + Otherwise, if udhcpc applet is enabled, it is used. + Otherwise, ifup/ifdown will have no support for DHCP. + +config INETD + bool "inetd" + default n + select FEATURE_SYSLOG + help + Internet superserver daemon + +config FEATURE_INETD_SUPPORT_BUILTIN_ECHO + bool "Support echo service" + default y + depends on INETD + help + Echo received data internal inetd service + +config FEATURE_INETD_SUPPORT_BUILTIN_DISCARD + bool "Support discard service" + default y + depends on INETD + help + Internet /dev/null internal inetd service + +config FEATURE_INETD_SUPPORT_BUILTIN_TIME + bool "Support time service" + default y + depends on INETD + help + Return 32 bit time since 1900 internal inetd service + +config FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME + bool "Support daytime service" + default y + depends on INETD + help + Return human-readable time internal inetd service + +config FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN + bool "Support chargen service" + default y + depends on INETD + help + Familiar character generator internal inetd service + +config FEATURE_INETD_RPC + bool "Support RPC services" + default n + depends on INETD + select FEATURE_HAVE_RPC + help + Support Sun-RPC based services + +config IP + bool "ip" + default n + help + The "ip" applet is a TCP/IP interface configuration and routing + utility. You generally don't need "ip" to use busybox with + TCP/IP. + +config FEATURE_IP_ADDRESS + bool "ip address" + default y + depends on IP + help + Address manipulation support for the "ip" applet. + +config FEATURE_IP_LINK + bool "ip link" + default y + depends on IP + help + Configure network devices with "ip". + +config FEATURE_IP_ROUTE + bool "ip route" + default y + depends on IP + help + Add support for routing table management to "ip". + +config FEATURE_IP_TUNNEL + bool "ip tunnel" + default n + depends on IP + help + Add support for tunneling commands to "ip". + +config FEATURE_IP_RULE + bool "ip rule" + default n + depends on IP + help + Add support for rule commands to "ip". + +config FEATURE_IP_SHORT_FORMS + bool "Support short forms of ip commands" + default n + depends on IP + help + Also support short-form of ip commands: + ip addr -> ipaddr + ip link -> iplink + ip route -> iproute + ip tunnel -> iptunnel + ip rule -> iprule + + Say N unless you desparately need the short form of the ip + object commands. + +config FEATURE_IP_RARE_PROTOCOLS + bool "Support displaying rarely used link types" + default n + depends on IP + help + If you are not going to use links of type "frad", "econet", + "bif" etc, you probably don't need to enable this. + Ethernet, wireless, infrared, ppp/slip, ip tunnelling + link types are supported without this option selected. + +config IPADDR + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ADDRESS + +config IPLINK + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_LINK + +config IPROUTE + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_ROUTE + +config IPTUNNEL + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_TUNNEL + +config IPRULE + bool + default y + depends on FEATURE_IP_SHORT_FORMS && FEATURE_IP_RULE + +config IPCALC + bool "ipcalc" + default n + help + ipcalc takes an IP address and netmask and calculates the + resulting broadcast, network, and host range. + +config FEATURE_IPCALC_FANCY + bool "Fancy IPCALC, more options, adds 1 kbyte" + default y + depends on IPCALC + help + Adds the options hostname, prefix and silent to the output of + "ipcalc". + +config FEATURE_IPCALC_LONG_OPTIONS + bool "Enable long options" + default n + depends on IPCALC && LONG_OPTS + help + Support long options for the ipcalc applet. + +config NAMEIF + bool "nameif" + default n + select FEATURE_SYSLOG + help + nameif is used to rename network interface by its MAC address. + Renamed interfaces MUST be in the down state. + It is possible to use a file (default: /etc/mactab) + with list of new interface names and MACs. + Maximum interface name length: IFNAMSIZ = 16 + File fields are separated by space or tab. + File format: + # Comment + new_interface_name XX:XX:XX:XX:XX:XX + +config FEATURE_NAMEIF_EXTENDED + bool "Extended nameif" + default n + depends on NAMEIF + help + This extends the nameif syntax to support the bus_info and driver + checks. The syntax is compatible to the normal nameif. + File format: + new_interface_name driver=asix bus=usb-0000:00:08.2-3 + new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 + new_interface_name mac=00:80:C8:38:91:B5 + new_interface_name 00:80:C8:38:91:B5 + +config NC + bool "nc" + default n + help + A simple Unix utility which reads and writes data across network + connections. + +config NC_SERVER + bool "Netcat server options (-l)" + default n + depends on NC + help + Allow netcat to act as a server. + +config NC_EXTRA + bool "Netcat extensions (-eiw and filename)" + default n + depends on NC + help + Add -e (support for executing the rest of the command line after + making or receiving a successful connection), -i (delay interval for + lines sent), -w (timeout for initial connection). + +config NETSTAT + bool "netstat" + default n + help + netstat prints information about the Linux networking subsystem. + +config FEATURE_NETSTAT_WIDE + bool "Enable wide netstat output" + default n + depends on NETSTAT + help + Add support for wide columns. Useful when displaying IPv6 addresses + (-W option). + +config FEATURE_NETSTAT_PRG + bool "Enable PID/Program name output" + default n + depends on NETSTAT + help + Add support for -p flag to print out PID and program name. + +700 bytes of code. + +config NSLOOKUP + bool "nslookup" + default n + help + nslookup is a tool to query Internet name servers. + +config NTPD + bool "ntpd" + default n + help + The NTP client/server daemon. + +config FEATURE_NTPD_SERVER + bool "Make ntpd usable as a NTP server" + default y + depends on NTPD + help + Make ntpd usable as a NTP server. If you disable this option + ntpd will be usable only as a NTP client. + +config PING + bool "ping" + default n + help + ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to + elicit an ICMP ECHO_RESPONSE from a host or gateway. + +config PING6 + bool "ping6" + default n + depends on FEATURE_IPV6 && PING + help + This will give you a ping that can talk IPv6. + +config FEATURE_FANCY_PING + bool "Enable fancy ping output" + default y + depends on PING + help + Make the output from the ping applet include statistics, and at the + same time provide full support for ICMP packets. + +config PSCAN + bool "pscan" + default n + help + Simple network port scanner. + +config ROUTE + bool "route" + default n + help + Route displays or manipulates the kernel's IP routing tables. + +config SLATTACH + bool "slattach" + default n + help + slattach is a small utility to attach network interfaces to serial + lines. + +#config TC +# bool "tc" +# default n +# help +# show / manipulate traffic control settings +# +#config FEATURE_TC_INGRESS +# def_bool n +# depends on TC + +config TCPSVD + bool "tcpsvd" + default n + help + tcpsvd listens on a TCP port and runs a program for each new + connection. + +config TELNET + bool "telnet" + default n + help + Telnet is an interface to the TELNET protocol, but is also commonly + used to test other simple protocols. + +config FEATURE_TELNET_TTYPE + bool "Pass TERM type to remote host" + default y + depends on TELNET + help + Setting this option will forward the TERM environment variable to the + remote host you are connecting to. This is useful to make sure that + things like ANSI colors and other control sequences behave. + +config FEATURE_TELNET_AUTOLOGIN + bool "Pass USER type to remote host" + default y + depends on TELNET + help + Setting this option will forward the USER environment variable to the + remote host you are connecting to. This is useful when you need to + log into a machine without telling the username (autologin). This + option enables `-a' and `-l USER' arguments. + +config TELNETD + bool "telnetd" + default n + select FEATURE_SYSLOG + help + A daemon for the TELNET protocol, allowing you to log onto the host + running the daemon. Please keep in mind that the TELNET protocol + sends passwords in plain text. If you can't afford the space for an + SSH daemon and you trust your network, you may say 'y' here. As a + more secure alternative, you should seriously consider installing the + very small Dropbear SSH daemon instead: + http://matt.ucc.asn.au/dropbear/dropbear.html + + Note that for busybox telnetd to work you need several things: + First of all, your kernel needs: + UNIX98_PTYS=y + DEVPTS_FS=y + + Next, you need a /dev/pts directory on your root filesystem: + + $ ls -ld /dev/pts + drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/ + + Next you need the pseudo terminal master multiplexer /dev/ptmx: + + $ ls -la /dev/ptmx + crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx + + Any /dev/ttyp[0-9]* files you may have can be removed. + Next, you need to mount the devpts filesystem on /dev/pts using: + + mount -t devpts devpts /dev/pts + + You need to be sure that Busybox has LOGIN and + FEATURE_SUID enabled. And finally, you should make + certain that Busybox has been installed setuid root: + + chown root.root /bin/busybox + chmod 4755 /bin/busybox + + with all that done, telnetd _should_ work.... + + +config FEATURE_TELNETD_STANDALONE + bool "Support standalone telnetd (not inetd only)" + default n + depends on TELNETD + help + Selecting this will make telnetd able to run standalone. + +config FEATURE_TELNETD_INETD_WAIT + bool "Support -w SEC option (inetd wait mode)" + default n + depends on FEATURE_TELNETD_STANDALONE + help + This option allows you to run telnetd in "inet wait" mode. + Example inetd.conf line (note "wait", not usual "nowait"): + + telnet stream tcp wait root /bin/telnetd telnetd -w10 + + In this example, inetd passes _listening_ socket_ as fd 0 + to telnetd when connection appears. + telnetd will wait for connections until all existing + connections are closed, and no new connections + appear during 10 seconds. Then it exits, and inetd continues + to listen for new connections. + + This option is rarely used. "tcp nowait" is much more usual + way of running tcp services, including telnetd. + You most probably want to say N here. + +config TFTP + bool "tftp" + default n + help + This enables the Trivial File Transfer Protocol client program. TFTP + is usually used for simple, small transfers such as a root image + for a network-enabled bootloader. + +config TFTPD + bool "tftpd" + default n + help + This enables the Trivial File Transfer Protocol server program. + It expects that stdin is a datagram socket and a packet + is already pending on it. It will exit after one transfer. + In other words: it should be run from inetd in nowait mode, + or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" + +config FEATURE_TFTP_GET + bool "Enable 'tftp get' and/or tftpd upload code" + default y + depends on TFTP || TFTPD + help + Add support for the GET command within the TFTP client. This allows + a client to retrieve a file from a TFTP server. + Also enable upload support in tftpd, if tftpd is selected. + + Note: this option does _not_ make tftpd capable of download + (the usual operation people need from it)! + +config FEATURE_TFTP_PUT + bool "Enable 'tftp put' and/or tftpd download code" + default y + depends on TFTP || TFTPD + help + Add support for the PUT command within the TFTP client. This allows + a client to transfer a file to a TFTP server. + Also enable download support in tftpd, if tftpd is selected. + +config FEATURE_TFTP_BLOCKSIZE + bool "Enable 'blksize' and 'tsize' protocol options" + default n + depends on TFTP || TFTPD + help + Allow tftp to specify block size, and tftpd to understand + "blksize" and "tsize" options. + +config FEATURE_TFTP_PROGRESS_BAR + bool "Enable tftp progress meter" + default n + depends on TFTP && FEATURE_TFTP_BLOCKSIZE + help + Show progress bar. + +config TFTP_DEBUG + bool "Enable debug" + default n + depends on TFTP || TFTPD + help + Make tftp[d] print debugging messages on stderr. + This is useful if you are diagnosing a bug in tftp[d]. + +config TRACEROUTE + bool "traceroute" + default n + help + Utility to trace the route of IP packets. + +config TRACEROUTE6 + bool "traceroute6" + default n + depends on FEATURE_IPV6 && TRACEROUTE + help + Utility to trace the route of IPv6 packets. + +config FEATURE_TRACEROUTE_VERBOSE + bool "Enable verbose output" + default n + depends on TRACEROUTE + help + Add some verbosity to traceroute. This includes among other things + hostnames and ICMP response types. + +config FEATURE_TRACEROUTE_SOURCE_ROUTE + bool "Enable loose source route" + default n + depends on TRACEROUTE + help + Add option to specify a loose source route gateway + (8 maximum). + +config FEATURE_TRACEROUTE_USE_ICMP + bool "Use ICMP instead of UDP" + default n + depends on TRACEROUTE + help + Add option -I to use ICMP ECHO instead of UDP datagrams. + +config TUNCTL + bool "tunctl" + default n + help + tunctl creates or deletes tun devices. + +config FEATURE_TUNCTL_UG + bool "Support owner:group assignment" + default n + depends on TUNCTL + help + Allow to specify owner and group of newly created interface. + 340 bytes of pure bloat. Say no here. + +source networking/udhcp/Config.in + +config IFUPDOWN_UDHCPC_CMD_OPTIONS + string "ifup udhcpc command line options" + default "-R -n" + depends on IFUPDOWN && UDHCPC + help + Command line options to pass to udhcpc from ifup. + Intended to alter options not available in /etc/network/interfaces. + (IE: --syslog --background etc...) + +config UDPSVD + bool "udpsvd" + default n + help + udpsvd listens on an UDP port and runs a program for each new + connection. + +config VCONFIG + bool "vconfig" + default n + help + Creates, removes, and configures VLAN interfaces + +config WGET + bool "wget" + default n + help + wget is a utility for non-interactive download of files from HTTP, + HTTPS, and FTP servers. + +config FEATURE_WGET_STATUSBAR + bool "Enable a nifty process meter (+2k)" + default y + depends on WGET + help + Enable the transfer progress bar for wget transfers. + +config FEATURE_WGET_AUTHENTICATION + bool "Enable HTTP authentication" + default y + depends on WGET + help + Support authenticated HTTP transfers. + +config FEATURE_WGET_LONG_OPTIONS + bool "Enable long options" + default n + depends on WGET && LONG_OPTS + help + Support long options for the wget applet. + +config ZCIP + bool "zcip" + default n + select FEATURE_SYSLOG + help + ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. + It's a daemon that allocates and defends a dynamically assigned + address on the 169.254/16 network, requiring no system administrator. + + See http://www.zeroconf.org for further details, and "zcip.script" + in the busybox examples. + +endmenu diff --git a/networking/Kbuild b/networking/Kbuild deleted file mode 100644 index b0765bcf6..000000000 --- a/networking/Kbuild +++ /dev/null @@ -1,48 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_ARP) += arp.o interface.o -lib-$(CONFIG_ARPING) += arping.o -lib-$(CONFIG_BRCTL) += brctl.o -lib-$(CONFIG_DNSD) += dnsd.o -lib-$(CONFIG_ETHER_WAKE) += ether-wake.o -lib-$(CONFIG_FAKEIDENTD) += isrv_identd.o isrv.o -lib-$(CONFIG_FTPD) += ftpd.o -lib-$(CONFIG_FTPGET) += ftpgetput.o -lib-$(CONFIG_FTPPUT) += ftpgetput.o -lib-$(CONFIG_HOSTNAME) += hostname.o -lib-$(CONFIG_HTTPD) += httpd.o -lib-$(CONFIG_IFCONFIG) += ifconfig.o interface.o -lib-$(CONFIG_IFENSLAVE) += ifenslave.o interface.o -lib-$(CONFIG_IFPLUGD) += ifplugd.o -lib-$(CONFIG_IFUPDOWN) += ifupdown.o -lib-$(CONFIG_INETD) += inetd.o -lib-$(CONFIG_IP) += ip.o -lib-$(CONFIG_IPCALC) += ipcalc.o -lib-$(CONFIG_NAMEIF) += nameif.o -lib-$(CONFIG_NC) += nc.o -lib-$(CONFIG_NETSTAT) += netstat.o -lib-$(CONFIG_NSLOOKUP) += nslookup.o -lib-$(CONFIG_NTPD) += ntpd.o -lib-$(CONFIG_PING) += ping.o -lib-$(CONFIG_PING6) += ping.o -lib-$(CONFIG_PSCAN) += pscan.o -lib-$(CONFIG_ROUTE) += route.o -lib-$(CONFIG_SLATTACH) += slattach.o -lib-$(CONFIG_TC) += tc.o -lib-$(CONFIG_TELNET) += telnet.o -lib-$(CONFIG_TELNETD) += telnetd.o -lib-$(CONFIG_TFTP) += tftp.o -lib-$(CONFIG_TFTPD) += tftp.o -lib-$(CONFIG_TRACEROUTE) += traceroute.o -lib-$(CONFIG_TUNCTL) += tunctl.o -lib-$(CONFIG_VCONFIG) += vconfig.o -lib-$(CONFIG_WGET) += wget.o -lib-$(CONFIG_ZCIP) += zcip.o - -lib-$(CONFIG_TCPSVD) += tcpudp.o tcpudp_perhost.o -lib-$(CONFIG_UDPSVD) += tcpudp.o tcpudp_perhost.o diff --git a/networking/Kbuild.src b/networking/Kbuild.src new file mode 100644 index 000000000..b0765bcf6 --- /dev/null +++ b/networking/Kbuild.src @@ -0,0 +1,48 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_ARP) += arp.o interface.o +lib-$(CONFIG_ARPING) += arping.o +lib-$(CONFIG_BRCTL) += brctl.o +lib-$(CONFIG_DNSD) += dnsd.o +lib-$(CONFIG_ETHER_WAKE) += ether-wake.o +lib-$(CONFIG_FAKEIDENTD) += isrv_identd.o isrv.o +lib-$(CONFIG_FTPD) += ftpd.o +lib-$(CONFIG_FTPGET) += ftpgetput.o +lib-$(CONFIG_FTPPUT) += ftpgetput.o +lib-$(CONFIG_HOSTNAME) += hostname.o +lib-$(CONFIG_HTTPD) += httpd.o +lib-$(CONFIG_IFCONFIG) += ifconfig.o interface.o +lib-$(CONFIG_IFENSLAVE) += ifenslave.o interface.o +lib-$(CONFIG_IFPLUGD) += ifplugd.o +lib-$(CONFIG_IFUPDOWN) += ifupdown.o +lib-$(CONFIG_INETD) += inetd.o +lib-$(CONFIG_IP) += ip.o +lib-$(CONFIG_IPCALC) += ipcalc.o +lib-$(CONFIG_NAMEIF) += nameif.o +lib-$(CONFIG_NC) += nc.o +lib-$(CONFIG_NETSTAT) += netstat.o +lib-$(CONFIG_NSLOOKUP) += nslookup.o +lib-$(CONFIG_NTPD) += ntpd.o +lib-$(CONFIG_PING) += ping.o +lib-$(CONFIG_PING6) += ping.o +lib-$(CONFIG_PSCAN) += pscan.o +lib-$(CONFIG_ROUTE) += route.o +lib-$(CONFIG_SLATTACH) += slattach.o +lib-$(CONFIG_TC) += tc.o +lib-$(CONFIG_TELNET) += telnet.o +lib-$(CONFIG_TELNETD) += telnetd.o +lib-$(CONFIG_TFTP) += tftp.o +lib-$(CONFIG_TFTPD) += tftp.o +lib-$(CONFIG_TRACEROUTE) += traceroute.o +lib-$(CONFIG_TUNCTL) += tunctl.o +lib-$(CONFIG_VCONFIG) += vconfig.o +lib-$(CONFIG_WGET) += wget.o +lib-$(CONFIG_ZCIP) += zcip.o + +lib-$(CONFIG_TCPSVD) += tcpudp.o tcpudp_perhost.o +lib-$(CONFIG_UDPSVD) += tcpudp.o tcpudp_perhost.o diff --git a/networking/libiproute/Kbuild b/networking/libiproute/Kbuild deleted file mode 100644 index 5f9dd32b6..000000000 --- a/networking/libiproute/Kbuild +++ /dev/null @@ -1,64 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2004 by Erik Andersen -# -# Licensed under the GPL v2 or later, see the file LICENSE in this tarball. -# - -lib-y:= - -lib-$(CONFIG_SLATTACH) += \ - utils.o - -lib-$(CONFIG_IP) += \ - ip_parse_common_args.o \ - libnetlink.o \ - ll_addr.o \ - ll_map.o \ - ll_proto.o \ - ll_types.o \ - rt_names.o \ - rtm_map.o \ - utils.o - -lib-$(CONFIG_FEATURE_IP_ADDRESS) += \ - ip_parse_common_args.o \ - ipaddress.o \ - libnetlink.o \ - ll_addr.o \ - ll_map.o \ - ll_types.o \ - rt_names.o \ - utils.o - -lib-$(CONFIG_FEATURE_IP_LINK) += \ - ip_parse_common_args.o \ - ipaddress.o \ - iplink.o \ - libnetlink.o \ - ll_addr.o \ - ll_map.o \ - ll_types.o \ - rt_names.o \ - utils.o - -lib-$(CONFIG_FEATURE_IP_ROUTE) += \ - ip_parse_common_args.o \ - iproute.o \ - libnetlink.o \ - ll_map.o \ - rt_names.o \ - rtm_map.o \ - utils.o - -lib-$(CONFIG_FEATURE_IP_TUNNEL) += \ - ip_parse_common_args.o \ - iptunnel.o \ - rt_names.o \ - utils.o - -lib-$(CONFIG_FEATURE_IP_RULE) += \ - ip_parse_common_args.o \ - iprule.o \ - rt_names.o \ - utils.o diff --git a/networking/libiproute/Kbuild.src b/networking/libiproute/Kbuild.src new file mode 100644 index 000000000..5f9dd32b6 --- /dev/null +++ b/networking/libiproute/Kbuild.src @@ -0,0 +1,64 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2004 by Erik Andersen +# +# Licensed under the GPL v2 or later, see the file LICENSE in this tarball. +# + +lib-y:= + +lib-$(CONFIG_SLATTACH) += \ + utils.o + +lib-$(CONFIG_IP) += \ + ip_parse_common_args.o \ + libnetlink.o \ + ll_addr.o \ + ll_map.o \ + ll_proto.o \ + ll_types.o \ + rt_names.o \ + rtm_map.o \ + utils.o + +lib-$(CONFIG_FEATURE_IP_ADDRESS) += \ + ip_parse_common_args.o \ + ipaddress.o \ + libnetlink.o \ + ll_addr.o \ + ll_map.o \ + ll_types.o \ + rt_names.o \ + utils.o + +lib-$(CONFIG_FEATURE_IP_LINK) += \ + ip_parse_common_args.o \ + ipaddress.o \ + iplink.o \ + libnetlink.o \ + ll_addr.o \ + ll_map.o \ + ll_types.o \ + rt_names.o \ + utils.o + +lib-$(CONFIG_FEATURE_IP_ROUTE) += \ + ip_parse_common_args.o \ + iproute.o \ + libnetlink.o \ + ll_map.o \ + rt_names.o \ + rtm_map.o \ + utils.o + +lib-$(CONFIG_FEATURE_IP_TUNNEL) += \ + ip_parse_common_args.o \ + iptunnel.o \ + rt_names.o \ + utils.o + +lib-$(CONFIG_FEATURE_IP_RULE) += \ + ip_parse_common_args.o \ + iprule.o \ + rt_names.o \ + utils.o diff --git a/networking/udhcp/Config.in b/networking/udhcp/Config.in deleted file mode 100644 index 34adf35fe..000000000 --- a/networking/udhcp/Config.in +++ /dev/null @@ -1,128 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -config UDHCPD - bool "udhcp server (udhcpd)" - default n - help - udhcpd is a DHCP server geared primarily toward embedded systems, - while striving to be fully functional and RFC compliant. - -config DHCPRELAY - bool "dhcprelay" - default n - depends on UDHCPD - help - dhcprelay listens for dhcp requests on one or more interfaces - and forwards these requests to a different interface or dhcp - server. - -config DUMPLEASES - bool "Lease display utility (dumpleases)" - default n - depends on UDHCPD - help - dumpleases displays the leases written out by the udhcpd server. - Lease times are stored in the file by time remaining in lease, or - by the absolute time that it expires in seconds from epoch. - -config FEATURE_UDHCPD_WRITE_LEASES_EARLY - bool "Rewrite the lease file at every new acknowledge" - default n - depends on UDHCPD - help - If selected, udhcpd will write a new file with leases every - time a new lease has been accepted, thus eliminating the need - to send SIGUSR1 for the initial writing or updating. Any timed - rewriting remains undisturbed - -config DHCPD_LEASES_FILE - string "Absolute path to lease file" - default "/var/lib/misc/udhcpd.leases" - depends on UDHCPD - help - udhcpd stores addresses in a lease file. This is the absolute path - of the file. Normally it is safe to leave it untouched. - -config UDHCPC - bool "udhcp client (udhcpc)" - default n - help - udhcpc is a DHCP client geared primarily toward embedded systems, - while striving to be fully functional and RFC compliant. - - The udhcp client negotiates a lease with the DHCP server and - runs a script when a lease is obtained or lost. - -config FEATURE_UDHCPC_ARPING - bool "Verify that the offered address is free, using ARP ping" - default y - depends on UDHCPC - help - If selected, udhcpc will send ARP probes and make sure - the offered address is really not in use by anyone. The client - will DHCPDECLINE the offer if the address is in use, - and restart the discover process. - -config FEATURE_UDHCP_PORT - bool "Enable '-P port' option for udhcpd and udhcpc" - default n - depends on UDHCPD || UDHCPC - help - At the cost of ~300 bytes, enables -P port option. - This feature is typically not needed. - -config UDHCP_DEBUG - int "Maximum verbosity level for udhcp applets (0..9)" - default 0 - range 0 9 - depends on UDHCPD || UDHCPC || DHCPRELAY - help - Verbosity can be increased with multiple -v options. - This options controls how high it can be cranked up. - - Bigger values result in bigger code. Levels above 1 - are very verbose and useful for debugging only. - -config FEATURE_UDHCP_RFC3397 - bool "Support for RFC3397 domain search (experimental)" - default n - depends on UDHCPD || UDHCPC - help - If selected, both client and server will support passing of domain - search lists via option 119, specified in RFC 3397, - and SIP servers option 120, specified in RFC 3361. - -config UDHCPC_DEFAULT_SCRIPT - string "Absolute path to config script" - default "/usr/share/udhcpc/default.script" - depends on UDHCPC - help - This script is called after udhcpc receives an answer. See - examples/udhcp for a working example. Normally it is safe - to leave this untouched. - -config UDHCPC_SLACK_FOR_BUGGY_SERVERS - int "DHCP options slack buffer size" - default 80 - range 0 924 - depends on UDHCPD || UDHCPC - help - Some buggy DHCP servers send DHCP offer packets with option - field larger than we expect (which might also be considered a - buffer overflow attempt). These packets are normally discarded. - If circumstances beyond your control force you to support such - servers, this may help. The upper limit (924) makes dhcpc accept - even 1500 byte packets (maximum-sized ethernet packets). - - This option does not make dhcp[cd] emit non-standard - sized packets. - - Known buggy DHCP servers: - 3Com OfficeConnect Remote 812 ADSL Router: - seems to confuse maximum allowed UDP packet size with - maximum size of entire IP packet, and sends packets which are - 28 bytes too large. - Seednet (ISP) VDSL: sends packets 2 bytes too large. diff --git a/networking/udhcp/Config.src b/networking/udhcp/Config.src new file mode 100644 index 000000000..34adf35fe --- /dev/null +++ b/networking/udhcp/Config.src @@ -0,0 +1,128 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +config UDHCPD + bool "udhcp server (udhcpd)" + default n + help + udhcpd is a DHCP server geared primarily toward embedded systems, + while striving to be fully functional and RFC compliant. + +config DHCPRELAY + bool "dhcprelay" + default n + depends on UDHCPD + help + dhcprelay listens for dhcp requests on one or more interfaces + and forwards these requests to a different interface or dhcp + server. + +config DUMPLEASES + bool "Lease display utility (dumpleases)" + default n + depends on UDHCPD + help + dumpleases displays the leases written out by the udhcpd server. + Lease times are stored in the file by time remaining in lease, or + by the absolute time that it expires in seconds from epoch. + +config FEATURE_UDHCPD_WRITE_LEASES_EARLY + bool "Rewrite the lease file at every new acknowledge" + default n + depends on UDHCPD + help + If selected, udhcpd will write a new file with leases every + time a new lease has been accepted, thus eliminating the need + to send SIGUSR1 for the initial writing or updating. Any timed + rewriting remains undisturbed + +config DHCPD_LEASES_FILE + string "Absolute path to lease file" + default "/var/lib/misc/udhcpd.leases" + depends on UDHCPD + help + udhcpd stores addresses in a lease file. This is the absolute path + of the file. Normally it is safe to leave it untouched. + +config UDHCPC + bool "udhcp client (udhcpc)" + default n + help + udhcpc is a DHCP client geared primarily toward embedded systems, + while striving to be fully functional and RFC compliant. + + The udhcp client negotiates a lease with the DHCP server and + runs a script when a lease is obtained or lost. + +config FEATURE_UDHCPC_ARPING + bool "Verify that the offered address is free, using ARP ping" + default y + depends on UDHCPC + help + If selected, udhcpc will send ARP probes and make sure + the offered address is really not in use by anyone. The client + will DHCPDECLINE the offer if the address is in use, + and restart the discover process. + +config FEATURE_UDHCP_PORT + bool "Enable '-P port' option for udhcpd and udhcpc" + default n + depends on UDHCPD || UDHCPC + help + At the cost of ~300 bytes, enables -P port option. + This feature is typically not needed. + +config UDHCP_DEBUG + int "Maximum verbosity level for udhcp applets (0..9)" + default 0 + range 0 9 + depends on UDHCPD || UDHCPC || DHCPRELAY + help + Verbosity can be increased with multiple -v options. + This options controls how high it can be cranked up. + + Bigger values result in bigger code. Levels above 1 + are very verbose and useful for debugging only. + +config FEATURE_UDHCP_RFC3397 + bool "Support for RFC3397 domain search (experimental)" + default n + depends on UDHCPD || UDHCPC + help + If selected, both client and server will support passing of domain + search lists via option 119, specified in RFC 3397, + and SIP servers option 120, specified in RFC 3361. + +config UDHCPC_DEFAULT_SCRIPT + string "Absolute path to config script" + default "/usr/share/udhcpc/default.script" + depends on UDHCPC + help + This script is called after udhcpc receives an answer. See + examples/udhcp for a working example. Normally it is safe + to leave this untouched. + +config UDHCPC_SLACK_FOR_BUGGY_SERVERS + int "DHCP options slack buffer size" + default 80 + range 0 924 + depends on UDHCPD || UDHCPC + help + Some buggy DHCP servers send DHCP offer packets with option + field larger than we expect (which might also be considered a + buffer overflow attempt). These packets are normally discarded. + If circumstances beyond your control force you to support such + servers, this may help. The upper limit (924) makes dhcpc accept + even 1500 byte packets (maximum-sized ethernet packets). + + This option does not make dhcp[cd] emit non-standard + sized packets. + + Known buggy DHCP servers: + 3Com OfficeConnect Remote 812 ADSL Router: + seems to confuse maximum allowed UDP packet size with + maximum size of entire IP packet, and sends packets which are + 28 bytes too large. + Seednet (ISP) VDSL: sends packets 2 bytes too large. diff --git a/networking/udhcp/Kbuild b/networking/udhcp/Kbuild deleted file mode 100644 index 1803903f0..000000000 --- a/networking/udhcp/Kbuild +++ /dev/null @@ -1,19 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2004 by Erik Andersen -# -# Licensed under the GPL v2 or later, see the file LICENSE in this tarball. -# - -lib-y:= - -lib-$(CONFIG_UDHCPC) += common.o packet.o signalpipe.o socket.o -lib-$(CONFIG_UDHCPD) += common.o packet.o signalpipe.o socket.o - -lib-$(CONFIG_UDHCPC) += dhcpc.o -lib-$(CONFIG_UDHCPD) += dhcpd.o arpping.o files.o leases.o static_leases.o -lib-$(CONFIG_DUMPLEASES) += dumpleases.o -lib-$(CONFIG_DHCPRELAY) += dhcprelay.o - -lib-$(CONFIG_FEATURE_UDHCPC_ARPING) += arpping.o -lib-$(CONFIG_FEATURE_UDHCP_RFC3397) += domain_codec.o diff --git a/networking/udhcp/Kbuild.src b/networking/udhcp/Kbuild.src new file mode 100644 index 000000000..1803903f0 --- /dev/null +++ b/networking/udhcp/Kbuild.src @@ -0,0 +1,19 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2004 by Erik Andersen +# +# Licensed under the GPL v2 or later, see the file LICENSE in this tarball. +# + +lib-y:= + +lib-$(CONFIG_UDHCPC) += common.o packet.o signalpipe.o socket.o +lib-$(CONFIG_UDHCPD) += common.o packet.o signalpipe.o socket.o + +lib-$(CONFIG_UDHCPC) += dhcpc.o +lib-$(CONFIG_UDHCPD) += dhcpd.o arpping.o files.o leases.o static_leases.o +lib-$(CONFIG_DUMPLEASES) += dumpleases.o +lib-$(CONFIG_DHCPRELAY) += dhcprelay.o + +lib-$(CONFIG_FEATURE_UDHCPC_ARPING) += arpping.o +lib-$(CONFIG_FEATURE_UDHCP_RFC3397) += domain_codec.o diff --git a/printutils/Config.in b/printutils/Config.in deleted file mode 100644 index 6912ece6c..000000000 --- a/printutils/Config.in +++ /dev/null @@ -1,26 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Print Utilities" - -config LPD - bool "lpd" - default n - help - lpd is a print spooling daemon. - -config LPR - bool "lpr" - default n - help - lpr sends files (or standard input) to a print spooling daemon. - -config LPQ - bool "lpq" - default n - help - lpq is a print spool queue examination and manipulation program. - -endmenu diff --git a/printutils/Config.src b/printutils/Config.src new file mode 100644 index 000000000..6912ece6c --- /dev/null +++ b/printutils/Config.src @@ -0,0 +1,26 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Print Utilities" + +config LPD + bool "lpd" + default n + help + lpd is a print spooling daemon. + +config LPR + bool "lpr" + default n + help + lpr sends files (or standard input) to a print spooling daemon. + +config LPQ + bool "lpq" + default n + help + lpq is a print spool queue examination and manipulation program. + +endmenu diff --git a/printutils/Kbuild b/printutils/Kbuild deleted file mode 100644 index 008290ee9..000000000 --- a/printutils/Kbuild +++ /dev/null @@ -1,9 +0,0 @@ -# Makefile for busybox -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y := - -lib-$(CONFIG_LPD) += lpd.o -lib-$(CONFIG_LPR) += lpr.o -lib-$(CONFIG_LPQ) += lpr.o diff --git a/printutils/Kbuild.src b/printutils/Kbuild.src new file mode 100644 index 000000000..008290ee9 --- /dev/null +++ b/printutils/Kbuild.src @@ -0,0 +1,9 @@ +# Makefile for busybox +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y := + +lib-$(CONFIG_LPD) += lpd.o +lib-$(CONFIG_LPR) += lpr.o +lib-$(CONFIG_LPQ) += lpr.o diff --git a/procps/Config.in b/procps/Config.in deleted file mode 100644 index 6a9a36638..000000000 --- a/procps/Config.in +++ /dev/null @@ -1,213 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Process Utilities" - -config FREE - bool "free" - default n - help - free displays the total amount of free and used physical and swap - memory in the system, as well as the buffers used by the kernel. - The shared memory column should be ignored; it is obsolete. - -config FUSER - bool "fuser" - default n - help - fuser lists all PIDs (Process IDs) that currently have a given - file open. fuser can also list all PIDs that have a given network - (TCP or UDP) port open. - -config KILL - bool "kill" - default n - help - The command kill sends the specified signal to the specified - process or process group. If no signal is specified, the TERM - signal is sent. - -config KILLALL - bool "killall" - default n - depends on KILL - help - killall sends a signal to all processes running any of the - specified commands. If no signal name is specified, SIGTERM is - sent. - -config KILLALL5 - bool "killall5" - default n - depends on KILL - -config NMETER - bool "nmeter" - default n - help - Prints selected system stats continuously, one line per update. - -config PGREP - bool "pgrep" - default n - help - Look for processes by name. - -config PIDOF - bool "pidof" - default n - help - Pidof finds the process id's (pids) of the named programs. It prints - those id's on the standard output. - -config FEATURE_PIDOF_SINGLE - bool "Enable argument for single shot (-s)" - default n - depends on PIDOF - help - Support argument '-s' for returning only the first pid found. - -config FEATURE_PIDOF_OMIT - bool "Enable argument for omitting pids (-o)" - default n - depends on PIDOF - help - Support argument '-o' for omitting the given pids in output. - The special pid %PPID can be used to name the parent process - of the pidof, in other words the calling shell or shell script. - -config PKILL - bool "pkill" - default n - help - Send signals to processes by name. - -config PS - bool "ps" - default n - help - ps gives a snapshot of the current processes. - -config FEATURE_PS_WIDE - bool "Enable wide output option (-w)" - default n - depends on PS - help - Support argument 'w' for wide output. - If given once, 132 chars are printed, and if given more - than once, the length is unlimited. - -config FEATURE_PS_TIME - bool "Enable time and elapsed time output" - default n - depends on PS && DESKTOP - help - Support -o time and -o etime output specifiers. - -config FEATURE_PS_ADDITIONAL_COLUMNS - bool "Enable additional ps columns" - default n - depends on PS && DESKTOP - help - Support -o rgroup, -o ruser, -o nice output specifiers. - -config FEATURE_PS_UNUSUAL_SYSTEMS - bool "Support Linux prior to 2.4.0 and non-ELF systems" - default n - depends on FEATURE_PS_TIME - help - Include support for measuring HZ on old kernels and non-ELF systems - (if you are on Linux 2.4.0+ and use ELF, you don't need this) - -config RENICE - bool "renice" - default n - help - Renice alters the scheduling priority of one or more running - processes. - -config BB_SYSCTL - bool "sysctl" - default n - help - Configure kernel parameters at runtime. - -config TOP - bool "top" - default n - help - The top program provides a dynamic real-time view of a running - system. - -config FEATURE_TOP_CPU_USAGE_PERCENTAGE - bool "Show CPU per-process usage percentage" - default y - depends on TOP - help - Make top display CPU usage for each process. - This adds about 2k. - -config FEATURE_TOP_CPU_GLOBAL_PERCENTS - bool "Show CPU global usage percentage" - default y - depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE - help - Makes top display "CPU: NN% usr NN% sys..." line. - This adds about 0.5k. - -config FEATURE_TOP_SMP_CPU - bool "SMP CPU usage display ('c' key)" - default n - depends on FEATURE_TOP_CPU_GLOBAL_PERCENTS - help - Allow 'c' key to switch between individual/cumulative CPU stats - This adds about 0.5k. - -config FEATURE_TOP_DECIMALS - bool "Show 1/10th of a percent in CPU/mem statistics" - default n - depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE - help - Show 1/10th of a percent in CPU/mem statistics. - This adds about 0.3k. - -config FEATURE_TOP_SMP_PROCESS - bool "Show CPU process runs on ('j' field)" - default n - depends on TOP - help - Show CPU where process was last found running on. - This is the 'j' field. - -config FEATURE_TOPMEM - bool "Topmem command ('s' key)" - default n - depends on TOP - help - Enable 's' in top (gives lots of memory info). - -config FEATURE_SHOW_THREADS - bool "Support for showing threads in ps/top" - default n - depends on PS || TOP - help - Enables ps -T option and 'h' command in top - -config UPTIME - bool "uptime" - default n - help - uptime gives a one line display of the current time, how long - the system has been running, how many users are currently logged - on, and the system load averages for the past 1, 5, and 15 minutes. - -config WATCH - bool "watch" - default n - help - watch is used to execute a program periodically, showing - output to the screen. - -endmenu diff --git a/procps/Config.src b/procps/Config.src new file mode 100644 index 000000000..6a9a36638 --- /dev/null +++ b/procps/Config.src @@ -0,0 +1,213 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Process Utilities" + +config FREE + bool "free" + default n + help + free displays the total amount of free and used physical and swap + memory in the system, as well as the buffers used by the kernel. + The shared memory column should be ignored; it is obsolete. + +config FUSER + bool "fuser" + default n + help + fuser lists all PIDs (Process IDs) that currently have a given + file open. fuser can also list all PIDs that have a given network + (TCP or UDP) port open. + +config KILL + bool "kill" + default n + help + The command kill sends the specified signal to the specified + process or process group. If no signal is specified, the TERM + signal is sent. + +config KILLALL + bool "killall" + default n + depends on KILL + help + killall sends a signal to all processes running any of the + specified commands. If no signal name is specified, SIGTERM is + sent. + +config KILLALL5 + bool "killall5" + default n + depends on KILL + +config NMETER + bool "nmeter" + default n + help + Prints selected system stats continuously, one line per update. + +config PGREP + bool "pgrep" + default n + help + Look for processes by name. + +config PIDOF + bool "pidof" + default n + help + Pidof finds the process id's (pids) of the named programs. It prints + those id's on the standard output. + +config FEATURE_PIDOF_SINGLE + bool "Enable argument for single shot (-s)" + default n + depends on PIDOF + help + Support argument '-s' for returning only the first pid found. + +config FEATURE_PIDOF_OMIT + bool "Enable argument for omitting pids (-o)" + default n + depends on PIDOF + help + Support argument '-o' for omitting the given pids in output. + The special pid %PPID can be used to name the parent process + of the pidof, in other words the calling shell or shell script. + +config PKILL + bool "pkill" + default n + help + Send signals to processes by name. + +config PS + bool "ps" + default n + help + ps gives a snapshot of the current processes. + +config FEATURE_PS_WIDE + bool "Enable wide output option (-w)" + default n + depends on PS + help + Support argument 'w' for wide output. + If given once, 132 chars are printed, and if given more + than once, the length is unlimited. + +config FEATURE_PS_TIME + bool "Enable time and elapsed time output" + default n + depends on PS && DESKTOP + help + Support -o time and -o etime output specifiers. + +config FEATURE_PS_ADDITIONAL_COLUMNS + bool "Enable additional ps columns" + default n + depends on PS && DESKTOP + help + Support -o rgroup, -o ruser, -o nice output specifiers. + +config FEATURE_PS_UNUSUAL_SYSTEMS + bool "Support Linux prior to 2.4.0 and non-ELF systems" + default n + depends on FEATURE_PS_TIME + help + Include support for measuring HZ on old kernels and non-ELF systems + (if you are on Linux 2.4.0+ and use ELF, you don't need this) + +config RENICE + bool "renice" + default n + help + Renice alters the scheduling priority of one or more running + processes. + +config BB_SYSCTL + bool "sysctl" + default n + help + Configure kernel parameters at runtime. + +config TOP + bool "top" + default n + help + The top program provides a dynamic real-time view of a running + system. + +config FEATURE_TOP_CPU_USAGE_PERCENTAGE + bool "Show CPU per-process usage percentage" + default y + depends on TOP + help + Make top display CPU usage for each process. + This adds about 2k. + +config FEATURE_TOP_CPU_GLOBAL_PERCENTS + bool "Show CPU global usage percentage" + default y + depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE + help + Makes top display "CPU: NN% usr NN% sys..." line. + This adds about 0.5k. + +config FEATURE_TOP_SMP_CPU + bool "SMP CPU usage display ('c' key)" + default n + depends on FEATURE_TOP_CPU_GLOBAL_PERCENTS + help + Allow 'c' key to switch between individual/cumulative CPU stats + This adds about 0.5k. + +config FEATURE_TOP_DECIMALS + bool "Show 1/10th of a percent in CPU/mem statistics" + default n + depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE + help + Show 1/10th of a percent in CPU/mem statistics. + This adds about 0.3k. + +config FEATURE_TOP_SMP_PROCESS + bool "Show CPU process runs on ('j' field)" + default n + depends on TOP + help + Show CPU where process was last found running on. + This is the 'j' field. + +config FEATURE_TOPMEM + bool "Topmem command ('s' key)" + default n + depends on TOP + help + Enable 's' in top (gives lots of memory info). + +config FEATURE_SHOW_THREADS + bool "Support for showing threads in ps/top" + default n + depends on PS || TOP + help + Enables ps -T option and 'h' command in top + +config UPTIME + bool "uptime" + default n + help + uptime gives a one line display of the current time, how long + the system has been running, how many users are currently logged + on, and the system load averages for the past 1, 5, and 15 minutes. + +config WATCH + bool "watch" + default n + help + watch is used to execute a program periodically, showing + output to the screen. + +endmenu diff --git a/procps/Kbuild b/procps/Kbuild deleted file mode 100644 index 8e62fdfa6..000000000 --- a/procps/Kbuild +++ /dev/null @@ -1,21 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_FREE) += free.o -lib-$(CONFIG_FUSER) += fuser.o -lib-$(CONFIG_KILL) += kill.o -lib-$(CONFIG_ASH) += kill.o # used for built-in kill by ash -lib-$(CONFIG_NMETER) += nmeter.o -lib-$(CONFIG_PGREP) += pgrep.o -lib-$(CONFIG_PKILL) += pgrep.o -lib-$(CONFIG_PIDOF) += pidof.o -lib-$(CONFIG_PS) += ps.o -lib-$(CONFIG_RENICE) += renice.o -lib-$(CONFIG_BB_SYSCTL) += sysctl.o -lib-$(CONFIG_TOP) += top.o -lib-$(CONFIG_UPTIME) += uptime.o -lib-$(CONFIG_WATCH) += watch.o diff --git a/procps/Kbuild.src b/procps/Kbuild.src new file mode 100644 index 000000000..8e62fdfa6 --- /dev/null +++ b/procps/Kbuild.src @@ -0,0 +1,21 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_FREE) += free.o +lib-$(CONFIG_FUSER) += fuser.o +lib-$(CONFIG_KILL) += kill.o +lib-$(CONFIG_ASH) += kill.o # used for built-in kill by ash +lib-$(CONFIG_NMETER) += nmeter.o +lib-$(CONFIG_PGREP) += pgrep.o +lib-$(CONFIG_PKILL) += pgrep.o +lib-$(CONFIG_PIDOF) += pidof.o +lib-$(CONFIG_PS) += ps.o +lib-$(CONFIG_RENICE) += renice.o +lib-$(CONFIG_BB_SYSCTL) += sysctl.o +lib-$(CONFIG_TOP) += top.o +lib-$(CONFIG_UPTIME) += uptime.o +lib-$(CONFIG_WATCH) += watch.o diff --git a/runit/Config.in b/runit/Config.in deleted file mode 100644 index 422ca7517..000000000 --- a/runit/Config.in +++ /dev/null @@ -1,83 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Runit Utilities" - -config RUNSV - bool "runsv" - default n - help - runsv starts and monitors a service and optionally an appendant log - service. - -config RUNSVDIR - bool "runsvdir" - default n - help - runsvdir starts a runsv process for each subdirectory, or symlink to - a directory, in the services directory dir, up to a limit of 1000 - subdirectories, and restarts a runsv process if it terminates. - -config FEATURE_RUNSVDIR_LOG - bool "Enable scrolling argument log" - depends on RUNSVDIR - default n - help - Enable feature where second parameter of runsvdir holds last error - message (viewable via top/ps). Otherwise (feature is off - or no parameter), error messages go to stderr only. - -config SV - bool "sv" - default n - help - sv reports the current status and controls the state of services - monitored by the runsv supervisor. - -config SV_DEFAULT_SERVICE_DIR - string "Default directory for services" - default "/var/service" - depends on SV - help - Default directory for services. - Defaults to "/var/service" - -config SVLOGD - bool "svlogd" - default n - help - svlogd continuously reads log data from its standard input, optionally - filters log messages, and writes the data to one or more automatically - rotated logs. - -config CHPST - bool "chpst" - default n - help - chpst changes the process state according to the given options, and - execs specified program. - -config SETUIDGID - bool "setuidgid" - help - Sets soft resource limits as specified by options - -config ENVUIDGID - bool "envuidgid" - help - Sets $UID to account's uid and $GID to account's gid - -config ENVDIR - bool "envdir" - help - Sets various environment variables as specified by files - in the given directory - -config SOFTLIMIT - bool "softlimit" - help - Sets soft resource limits as specified by options - -endmenu diff --git a/runit/Config.src b/runit/Config.src new file mode 100644 index 000000000..422ca7517 --- /dev/null +++ b/runit/Config.src @@ -0,0 +1,83 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Runit Utilities" + +config RUNSV + bool "runsv" + default n + help + runsv starts and monitors a service and optionally an appendant log + service. + +config RUNSVDIR + bool "runsvdir" + default n + help + runsvdir starts a runsv process for each subdirectory, or symlink to + a directory, in the services directory dir, up to a limit of 1000 + subdirectories, and restarts a runsv process if it terminates. + +config FEATURE_RUNSVDIR_LOG + bool "Enable scrolling argument log" + depends on RUNSVDIR + default n + help + Enable feature where second parameter of runsvdir holds last error + message (viewable via top/ps). Otherwise (feature is off + or no parameter), error messages go to stderr only. + +config SV + bool "sv" + default n + help + sv reports the current status and controls the state of services + monitored by the runsv supervisor. + +config SV_DEFAULT_SERVICE_DIR + string "Default directory for services" + default "/var/service" + depends on SV + help + Default directory for services. + Defaults to "/var/service" + +config SVLOGD + bool "svlogd" + default n + help + svlogd continuously reads log data from its standard input, optionally + filters log messages, and writes the data to one or more automatically + rotated logs. + +config CHPST + bool "chpst" + default n + help + chpst changes the process state according to the given options, and + execs specified program. + +config SETUIDGID + bool "setuidgid" + help + Sets soft resource limits as specified by options + +config ENVUIDGID + bool "envuidgid" + help + Sets $UID to account's uid and $GID to account's gid + +config ENVDIR + bool "envdir" + help + Sets various environment variables as specified by files + in the given directory + +config SOFTLIMIT + bool "softlimit" + help + Sets soft resource limits as specified by options + +endmenu diff --git a/runit/Kbuild b/runit/Kbuild deleted file mode 100644 index ab9eef6ff..000000000 --- a/runit/Kbuild +++ /dev/null @@ -1,17 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_RUNSV) += runsv.o runit_lib.o -lib-$(CONFIG_RUNSVDIR) += runsvdir.o runit_lib.o -lib-$(CONFIG_SV) += sv.o runit_lib.o -lib-$(CONFIG_SVLOGD) += svlogd.o runit_lib.o -lib-$(CONFIG_CHPST) += chpst.o - -lib-$(CONFIG_ENVDIR) += chpst.o -lib-$(CONFIG_ENVUIDGID) += chpst.o -lib-$(CONFIG_SETUIDGID) += chpst.o -lib-$(CONFIG_SOFTLIMIT) += chpst.o diff --git a/runit/Kbuild.src b/runit/Kbuild.src new file mode 100644 index 000000000..ab9eef6ff --- /dev/null +++ b/runit/Kbuild.src @@ -0,0 +1,17 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_RUNSV) += runsv.o runit_lib.o +lib-$(CONFIG_RUNSVDIR) += runsvdir.o runit_lib.o +lib-$(CONFIG_SV) += sv.o runit_lib.o +lib-$(CONFIG_SVLOGD) += svlogd.o runit_lib.o +lib-$(CONFIG_CHPST) += chpst.o + +lib-$(CONFIG_ENVDIR) += chpst.o +lib-$(CONFIG_ENVUIDGID) += chpst.o +lib-$(CONFIG_SETUIDGID) += chpst.o +lib-$(CONFIG_SOFTLIMIT) += chpst.o diff --git a/scripts/Kbuild b/scripts/Kbuild deleted file mode 100644 index 83b423253..000000000 --- a/scripts/Kbuild +++ /dev/null @@ -1,7 +0,0 @@ -### -# scripts contains sources for various helper programs used throughout -# the kernel for the build process. -# --------------------------------------------------------------------------- - -# Let clean descend into subdirs -subdir- += basic kconfig diff --git a/scripts/Kbuild.src b/scripts/Kbuild.src new file mode 100644 index 000000000..83b423253 --- /dev/null +++ b/scripts/Kbuild.src @@ -0,0 +1,7 @@ +### +# scripts contains sources for various helper programs used throughout +# the kernel for the build process. +# --------------------------------------------------------------------------- + +# Let clean descend into subdirs +subdir- += basic kconfig diff --git a/selinux/Config.in b/selinux/Config.in deleted file mode 100644 index e46030adf..000000000 --- a/selinux/Config.in +++ /dev/null @@ -1,123 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "SELinux Utilities" - depends on SELINUX - -config CHCON - bool "chcon" - default n - depends on SELINUX - help - Enable support to change the security context of file. - -config FEATURE_CHCON_LONG_OPTIONS - bool "Enable long options" - default y - depends on CHCON && LONG_OPTS - help - Support long options for the chcon applet. - -config GETENFORCE - bool "getenforce" - default n - depends on SELINUX - help - Enable support to get the current mode of SELinux. - -config GETSEBOOL - bool "getsebool" - default n - depends on SELINUX - help - Enable support to get SELinux boolean values. - -config LOAD_POLICY - bool "load_policy" - default n - depends on SELINUX - help - Enable support to load SELinux policy. - -config MATCHPATHCON - bool "matchpathcon" - default n - depends on SELINUX - help - Enable support to get default security context of the - specified path from the file contexts configuration. - -config RESTORECON - bool "restorecon" - default n - depends on SELINUX - help - Enable support to relabel files. The feature is almost - the same as setfiles, but usage is a little different. - -config RUNCON - bool "runcon" - default n - depends on SELINUX - help - Enable support to run command in speficied security context. - -config FEATURE_RUNCON_LONG_OPTIONS - bool "Enable long options" - default y - depends on RUNCON && LONG_OPTS - help - Support long options for the runcon applet. - -config SELINUXENABLED - bool "selinuxenabled" - default n - depends on SELINUX - help - Enable support for this command to be used within shell scripts - to determine if selinux is enabled. - -config SETENFORCE - bool "setenforce" - default n - depends on SELINUX - help - Enable support to modify the mode SELinux is running in. - -config SETFILES - bool "setfiles" - default n - depends on SELINUX - help - Enable support to modify to relabel files. - Notice: If you built libselinux with -D_FILE_OFFSET_BITS=64, - (It is default in libselinux's Makefile), you _must_ enable - CONFIG_LFS. - -config FEATURE_SETFILES_CHECK_OPTION - bool "Enable check option" - default n - depends on SETFILES - help - Support "-c" option (check the validity of the contexts against - the specified binary policy) for setfiles. Requires libsepol. - -config SETSEBOOL - bool "setsebool" - default n - depends on SELINUX - help - Enable support for change boolean. - semanage and -P option is not supported yet. - -config SESTATUS - bool "sestatus" - default n - depends on SELINUX - help - Displays the status of SELinux. - -endmenu - diff --git a/selinux/Config.src b/selinux/Config.src new file mode 100644 index 000000000..e46030adf --- /dev/null +++ b/selinux/Config.src @@ -0,0 +1,123 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "SELinux Utilities" + depends on SELINUX + +config CHCON + bool "chcon" + default n + depends on SELINUX + help + Enable support to change the security context of file. + +config FEATURE_CHCON_LONG_OPTIONS + bool "Enable long options" + default y + depends on CHCON && LONG_OPTS + help + Support long options for the chcon applet. + +config GETENFORCE + bool "getenforce" + default n + depends on SELINUX + help + Enable support to get the current mode of SELinux. + +config GETSEBOOL + bool "getsebool" + default n + depends on SELINUX + help + Enable support to get SELinux boolean values. + +config LOAD_POLICY + bool "load_policy" + default n + depends on SELINUX + help + Enable support to load SELinux policy. + +config MATCHPATHCON + bool "matchpathcon" + default n + depends on SELINUX + help + Enable support to get default security context of the + specified path from the file contexts configuration. + +config RESTORECON + bool "restorecon" + default n + depends on SELINUX + help + Enable support to relabel files. The feature is almost + the same as setfiles, but usage is a little different. + +config RUNCON + bool "runcon" + default n + depends on SELINUX + help + Enable support to run command in speficied security context. + +config FEATURE_RUNCON_LONG_OPTIONS + bool "Enable long options" + default y + depends on RUNCON && LONG_OPTS + help + Support long options for the runcon applet. + +config SELINUXENABLED + bool "selinuxenabled" + default n + depends on SELINUX + help + Enable support for this command to be used within shell scripts + to determine if selinux is enabled. + +config SETENFORCE + bool "setenforce" + default n + depends on SELINUX + help + Enable support to modify the mode SELinux is running in. + +config SETFILES + bool "setfiles" + default n + depends on SELINUX + help + Enable support to modify to relabel files. + Notice: If you built libselinux with -D_FILE_OFFSET_BITS=64, + (It is default in libselinux's Makefile), you _must_ enable + CONFIG_LFS. + +config FEATURE_SETFILES_CHECK_OPTION + bool "Enable check option" + default n + depends on SETFILES + help + Support "-c" option (check the validity of the contexts against + the specified binary policy) for setfiles. Requires libsepol. + +config SETSEBOOL + bool "setsebool" + default n + depends on SELINUX + help + Enable support for change boolean. + semanage and -P option is not supported yet. + +config SESTATUS + bool "sestatus" + default n + depends on SELINUX + help + Displays the status of SELinux. + +endmenu + diff --git a/selinux/Kbuild b/selinux/Kbuild deleted file mode 100644 index d0c190ceb..000000000 --- a/selinux/Kbuild +++ /dev/null @@ -1,20 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# Copyright (C) 2007 by KaiGai Kohei -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_CHCON) += chcon.o -lib-$(CONFIG_GETENFORCE) += getenforce.o -lib-$(CONFIG_GETSEBOOL) += getsebool.o -lib-$(CONFIG_LOAD_POLICY) += load_policy.o -lib-$(CONFIG_MATCHPATHCON) += matchpathcon.o -lib-$(CONFIG_RUNCON) += runcon.o -lib-$(CONFIG_SELINUXENABLED) += selinuxenabled.o -lib-$(CONFIG_SETENFORCE) += setenforce.o -lib-$(CONFIG_SETFILES) += setfiles.o -lib-$(CONFIG_RESTORECON) += setfiles.o -lib-$(CONFIG_SETSEBOOL) += setsebool.o -lib-$(CONFIG_SESTATUS) += sestatus.o diff --git a/selinux/Kbuild.src b/selinux/Kbuild.src new file mode 100644 index 000000000..d0c190ceb --- /dev/null +++ b/selinux/Kbuild.src @@ -0,0 +1,20 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# Copyright (C) 2007 by KaiGai Kohei +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_CHCON) += chcon.o +lib-$(CONFIG_GETENFORCE) += getenforce.o +lib-$(CONFIG_GETSEBOOL) += getsebool.o +lib-$(CONFIG_LOAD_POLICY) += load_policy.o +lib-$(CONFIG_MATCHPATHCON) += matchpathcon.o +lib-$(CONFIG_RUNCON) += runcon.o +lib-$(CONFIG_SELINUXENABLED) += selinuxenabled.o +lib-$(CONFIG_SETENFORCE) += setenforce.o +lib-$(CONFIG_SETFILES) += setfiles.o +lib-$(CONFIG_RESTORECON) += setfiles.o +lib-$(CONFIG_SETSEBOOL) += setsebool.o +lib-$(CONFIG_SESTATUS) += sestatus.o diff --git a/shell/Config.in b/shell/Config.in deleted file mode 100644 index 286a3415e..000000000 --- a/shell/Config.in +++ /dev/null @@ -1,396 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Shells" - -choice - prompt "Choose which shell is aliased to 'sh' name" - default FEATURE_SH_IS_NONE - help - Choose which shell you want to be executed by 'sh' alias. - The ash shell is the most bash compatible and full featured one. - -config FEATURE_SH_IS_ASH - select ASH - bool "ash" - depends on !NOMMU - -config FEATURE_SH_IS_HUSH - select HUSH - bool "hush" - -config FEATURE_SH_IS_NONE - bool "none" - -endchoice - -choice - prompt "Choose which shell is aliased to 'bash' name" - default FEATURE_BASH_IS_NONE - help - Choose which shell you want to be executed by 'bash' alias. - The ash shell is the most bash compatible and full featured one. - - Note that selecting this option does not switch on any bash - compatibility code. It merely makes it possible to install - /bin/bash (sym)link and run scripts which start with - #!/bin/bash line. - - Many systems use it in scripts which use bash-specific features, - even simple ones like $RANDOM. Without this option, busybox - can't be used for running them because it won't recongnize - "bash" as a supported applet name. - -config FEATURE_BASH_IS_ASH - select ASH - bool "ash" - depends on !NOMMU - -config FEATURE_BASH_IS_HUSH - select HUSH - bool "hush" - -config FEATURE_BASH_IS_NONE - bool "none" - -endchoice - -config ASH - bool "ash" - default n - depends on !NOMMU - help - Tha 'ash' shell adds about 60k in the default configuration and is - the most complete and most pedantically correct shell included with - busybox. This shell is actually a derivative of the Debian 'dash' - shell (by Herbert Xu), which was created by porting the 'ash' shell - (written by Kenneth Almquist) from NetBSD. - -config ASH_BASH_COMPAT - bool "bash-compatible extensions" - default y - depends on ASH - help - Enable bash-compatible extensions. - -config ASH_JOB_CONTROL - bool "Job control" - default y - depends on ASH - help - Enable job control in the ash shell. - -config ASH_ALIAS - bool "alias support" - default y - depends on ASH - help - Enable alias support in the ash shell. - -config ASH_GETOPTS - bool "Builtin getopt to parse positional parameters" - default n - depends on ASH - help - Enable getopts builtin in the ash shell. - -config ASH_BUILTIN_ECHO - bool "Builtin version of 'echo'" - default y - depends on ASH - help - Enable support for echo, builtin to ash. - -config ASH_BUILTIN_PRINTF - bool "Builtin version of 'printf'" - default y - depends on ASH - help - Enable support for printf, builtin to ash. - -config ASH_BUILTIN_TEST - bool "Builtin version of 'test'" - default y - depends on ASH - help - Enable support for test, builtin to ash. - -config ASH_CMDCMD - bool "'command' command to override shell builtins" - default n - depends on ASH - help - Enable support for the ash 'command' builtin, which allows - you to run the specified command with the specified arguments, - even when there is an ash builtin command with the same name. - -config ASH_MAIL - bool "Check for new mail on interactive shells" - default y - depends on ASH - help - Enable "check for new mail" in the ash shell. - -config ASH_OPTIMIZE_FOR_SIZE - bool "Optimize for size instead of speed" - default y - depends on ASH - help - Compile ash for reduced size at the price of speed. - -config ASH_RANDOM_SUPPORT - bool "Pseudorandom generator and $RANDOM variable" - default n - depends on ASH - help - Enable pseudorandom generator and dynamic variable "$RANDOM". - Each read of "$RANDOM" will generate a new pseudorandom value. - You can reset the generator by using a specified start value. - After "unset RANDOM" the generator will switch off and this - variable will no longer have special treatment. - -config ASH_EXPAND_PRMT - bool "Expand prompt string" - default n - depends on ASH - help - "PS#" may contain volatile content, such as backquote commands. - This option recreates the prompt string from the environment - variable each time it is displayed. - -config HUSH - bool "hush" - default n - help - hush is a small shell (22k). It handles the normal flow control - constructs such as if/then/elif/else/fi, for/in/do/done, while loops, - case/esac. Redirections, here documents, $((arithmetic)) - and functions are supported. - - It will compile and work on no-mmu systems. - - It does not handle select, aliases, brace expansion, - tilde expansion, &>file and >&file redirection of stdout+stderr. - -config HUSH_BASH_COMPAT - bool "bash-compatible extensions" - default y - depends on HUSH - help - Enable bash-compatible extensions. - -config HUSH_HELP - bool "help builtin" - default n - depends on HUSH - help - Enable help builtin in hush. Code size + ~1 kbyte. - -config HUSH_INTERACTIVE - bool "Interactive mode" - default y - depends on HUSH - help - Enable interactive mode (prompt and command editing). - Without this, hush simply reads and executes commands - from stdin just like a shell script from a file. - No prompt, no PS1/PS2 magic shell variables. - -config HUSH_JOB - bool "Job control" - default n - depends on HUSH_INTERACTIVE - help - Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current - command (not entire shell), fg/bg builtins work. Without this option, - "cmd &" still works by simply spawning a process and immediately - prompting for next command (or executing next command in a script), - but no separate process group is formed. - -config HUSH_TICK - bool "Process substitution" - default n - depends on HUSH - help - Enable process substitution `command` and $(command) in hush. - -config HUSH_IF - bool "Support if/then/elif/else/fi" - default n - depends on HUSH - help - Enable if/then/elif/else/fi in hush. - -config HUSH_LOOPS - bool "Support for, while and until loops" - default n - depends on HUSH - help - Enable for, while and until loops in hush. - -config HUSH_CASE - bool "Support case ... esac statement" - default n - depends on HUSH - help - Enable case ... esac statement in hush. +400 bytes. - -config HUSH_FUNCTIONS - bool "Support funcname() { commands; } syntax" - default n - depends on HUSH - help - Enable support for shell functions in hush. +800 bytes. - -config HUSH_LOCAL - bool "Support local builtin" - default n - depends on HUSH_FUNCTIONS - help - Enable support for local variables in functions. - -config HUSH_EXPORT_N - bool "Support export '-n' option" - default n - depends on HUSH - help - Enable support for export '-n' option in hush. It is a bash extension. - -config HUSH_RANDOM_SUPPORT - bool "Pseudorandom generator and $RANDOM variable" - default n - depends on HUSH - help - Enable pseudorandom generator and dynamic variable "$RANDOM". - Each read of "$RANDOM" will generate a new pseudorandom value. - -config LASH - bool "lash (deprecated: aliased to hush)" - default n - select HUSH - help - lash is deprecated and will be removed, please migrate to hush. - -config MSH - bool "msh (deprecated: please use hush)" - default n - select HUSH - help - msh is deprecated and will be removed, please migrate to hush. - If there is a feature msh has but hush does not, please let us know. - -# The minix shell (adds just 30k) is quite complete and handles things -# like for/do/done, case/esac and all the things you expect a Bourne -# shell to do. It is not always pedantically correct about Bourne -# shell grammar (try running the shell testscript "tests/sh.testcases" -# on it and compare vs bash) but for most things it works quite well. -# It uses only vfork, so it can be used on uClinux systems. - - -config SH_MATH_SUPPORT - bool "POSIX math support" - default y - depends on ASH || HUSH - help - Enable math support in the shell via $((...)) syntax. - -config SH_MATH_SUPPORT_64 - bool "Extend POSIX math support to 64 bit" - default n - depends on SH_MATH_SUPPORT - help - Enable 64-bit math support in the shell. This will make the shell - slightly larger, but will allow computation with very large numbers. - This is not in POSIX, so do not rely on this in portable code. - -config FEATURE_SH_EXTRA_QUIET - bool "Hide message on interactive shell startup" - default n - depends on MSH || LASH || HUSH || ASH - help - Remove the busybox introduction when starting a shell. - -config FEATURE_SH_STANDALONE - bool "Standalone shell" - default n - depends on (MSH || LASH || HUSH || ASH) && FEATURE_PREFER_APPLETS - help - This option causes busybox shells to use busybox applets - in preference to executables in the PATH whenever possible. For - example, entering the command 'ifconfig' into the shell would cause - busybox to use the ifconfig busybox applet. Specifying the fully - qualified executable name, such as '/sbin/ifconfig' will still - execute the /sbin/ifconfig executable on the filesystem. This option - is generally used when creating a statically linked version of busybox - for use as a rescue shell, in the event that you screw up your system. - - This is implemented by re-execing /proc/self/exe (typically) - with right parameters. Some selected applets ("NOFORK" applets) - can even be executed without creating new process. - Instead, busybox will call _main() internally. - - However, this causes problems in chroot jails without mounted /proc - and with ps/top (command name can be shown as 'exe' for applets - started this way). -# untrue? -# Note that this will *also* cause applets to take precedence -# over shell builtins of the same name. So turning this on will -# eliminate any performance gained by turning on the builtin "echo" -# and "test" commands in ash. -# untrue? -# Note that when using this option, the shell will attempt to directly -# run '/bin/busybox'. If you do not have the busybox binary sitting in -# that exact location with that exact name, this option will not work at -# all. - -config FEATURE_SH_NOFORK - bool "Run 'nofork' applets directly" - default n - depends on (MSH || LASH || HUSH || ASH) && FEATURE_PREFER_APPLETS - help - This option causes busybox shells [currently only ash] - to not execute typical fork/exec/wait sequence, but call _main - directly, if possible. (Sometimes it is not possible: for example, - this is not possible in pipes). - - This will be done only for some applets (those which are marked - NOFORK in include/applets.h). - - This may significantly speed up some shell scripts. - - This feature is relatively new. Use with care. - -config CTTYHACK - bool "cttyhack" - default n - help - One common problem reported on the mailing list is "can't access tty; - job control turned off" error message which typically appears when - one tries to use shell with stdin/stdout opened to /dev/console. - This device is special - it cannot be a controlling tty. - - Proper solution is to use correct device instead of /dev/console. - - cttyhack provides "quick and dirty" solution to this problem. - It analyzes stdin with various ioctls, trying to determine whether - it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line). - If it detects one, it closes stdin/out/err and reopens that device. - Then it executes given program. Opening the device will make - that device a controlling tty. This may require cttyhack - to be a session leader. - - Example for /etc/inittab (for busybox init): - - ::respawn:/bin/cttyhack /bin/sh - - Giving controlling tty to shell running with PID 1: - - $ exec cttyhack sh - - Starting an interactive shell from boot shell script: - - setsid cttyhack sh - -endmenu diff --git a/shell/Config.src b/shell/Config.src new file mode 100644 index 000000000..286a3415e --- /dev/null +++ b/shell/Config.src @@ -0,0 +1,396 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Shells" + +choice + prompt "Choose which shell is aliased to 'sh' name" + default FEATURE_SH_IS_NONE + help + Choose which shell you want to be executed by 'sh' alias. + The ash shell is the most bash compatible and full featured one. + +config FEATURE_SH_IS_ASH + select ASH + bool "ash" + depends on !NOMMU + +config FEATURE_SH_IS_HUSH + select HUSH + bool "hush" + +config FEATURE_SH_IS_NONE + bool "none" + +endchoice + +choice + prompt "Choose which shell is aliased to 'bash' name" + default FEATURE_BASH_IS_NONE + help + Choose which shell you want to be executed by 'bash' alias. + The ash shell is the most bash compatible and full featured one. + + Note that selecting this option does not switch on any bash + compatibility code. It merely makes it possible to install + /bin/bash (sym)link and run scripts which start with + #!/bin/bash line. + + Many systems use it in scripts which use bash-specific features, + even simple ones like $RANDOM. Without this option, busybox + can't be used for running them because it won't recongnize + "bash" as a supported applet name. + +config FEATURE_BASH_IS_ASH + select ASH + bool "ash" + depends on !NOMMU + +config FEATURE_BASH_IS_HUSH + select HUSH + bool "hush" + +config FEATURE_BASH_IS_NONE + bool "none" + +endchoice + +config ASH + bool "ash" + default n + depends on !NOMMU + help + Tha 'ash' shell adds about 60k in the default configuration and is + the most complete and most pedantically correct shell included with + busybox. This shell is actually a derivative of the Debian 'dash' + shell (by Herbert Xu), which was created by porting the 'ash' shell + (written by Kenneth Almquist) from NetBSD. + +config ASH_BASH_COMPAT + bool "bash-compatible extensions" + default y + depends on ASH + help + Enable bash-compatible extensions. + +config ASH_JOB_CONTROL + bool "Job control" + default y + depends on ASH + help + Enable job control in the ash shell. + +config ASH_ALIAS + bool "alias support" + default y + depends on ASH + help + Enable alias support in the ash shell. + +config ASH_GETOPTS + bool "Builtin getopt to parse positional parameters" + default n + depends on ASH + help + Enable getopts builtin in the ash shell. + +config ASH_BUILTIN_ECHO + bool "Builtin version of 'echo'" + default y + depends on ASH + help + Enable support for echo, builtin to ash. + +config ASH_BUILTIN_PRINTF + bool "Builtin version of 'printf'" + default y + depends on ASH + help + Enable support for printf, builtin to ash. + +config ASH_BUILTIN_TEST + bool "Builtin version of 'test'" + default y + depends on ASH + help + Enable support for test, builtin to ash. + +config ASH_CMDCMD + bool "'command' command to override shell builtins" + default n + depends on ASH + help + Enable support for the ash 'command' builtin, which allows + you to run the specified command with the specified arguments, + even when there is an ash builtin command with the same name. + +config ASH_MAIL + bool "Check for new mail on interactive shells" + default y + depends on ASH + help + Enable "check for new mail" in the ash shell. + +config ASH_OPTIMIZE_FOR_SIZE + bool "Optimize for size instead of speed" + default y + depends on ASH + help + Compile ash for reduced size at the price of speed. + +config ASH_RANDOM_SUPPORT + bool "Pseudorandom generator and $RANDOM variable" + default n + depends on ASH + help + Enable pseudorandom generator and dynamic variable "$RANDOM". + Each read of "$RANDOM" will generate a new pseudorandom value. + You can reset the generator by using a specified start value. + After "unset RANDOM" the generator will switch off and this + variable will no longer have special treatment. + +config ASH_EXPAND_PRMT + bool "Expand prompt string" + default n + depends on ASH + help + "PS#" may contain volatile content, such as backquote commands. + This option recreates the prompt string from the environment + variable each time it is displayed. + +config HUSH + bool "hush" + default n + help + hush is a small shell (22k). It handles the normal flow control + constructs such as if/then/elif/else/fi, for/in/do/done, while loops, + case/esac. Redirections, here documents, $((arithmetic)) + and functions are supported. + + It will compile and work on no-mmu systems. + + It does not handle select, aliases, brace expansion, + tilde expansion, &>file and >&file redirection of stdout+stderr. + +config HUSH_BASH_COMPAT + bool "bash-compatible extensions" + default y + depends on HUSH + help + Enable bash-compatible extensions. + +config HUSH_HELP + bool "help builtin" + default n + depends on HUSH + help + Enable help builtin in hush. Code size + ~1 kbyte. + +config HUSH_INTERACTIVE + bool "Interactive mode" + default y + depends on HUSH + help + Enable interactive mode (prompt and command editing). + Without this, hush simply reads and executes commands + from stdin just like a shell script from a file. + No prompt, no PS1/PS2 magic shell variables. + +config HUSH_JOB + bool "Job control" + default n + depends on HUSH_INTERACTIVE + help + Enable job control: Ctrl-Z backgrounds, Ctrl-C interrupts current + command (not entire shell), fg/bg builtins work. Without this option, + "cmd &" still works by simply spawning a process and immediately + prompting for next command (or executing next command in a script), + but no separate process group is formed. + +config HUSH_TICK + bool "Process substitution" + default n + depends on HUSH + help + Enable process substitution `command` and $(command) in hush. + +config HUSH_IF + bool "Support if/then/elif/else/fi" + default n + depends on HUSH + help + Enable if/then/elif/else/fi in hush. + +config HUSH_LOOPS + bool "Support for, while and until loops" + default n + depends on HUSH + help + Enable for, while and until loops in hush. + +config HUSH_CASE + bool "Support case ... esac statement" + default n + depends on HUSH + help + Enable case ... esac statement in hush. +400 bytes. + +config HUSH_FUNCTIONS + bool "Support funcname() { commands; } syntax" + default n + depends on HUSH + help + Enable support for shell functions in hush. +800 bytes. + +config HUSH_LOCAL + bool "Support local builtin" + default n + depends on HUSH_FUNCTIONS + help + Enable support for local variables in functions. + +config HUSH_EXPORT_N + bool "Support export '-n' option" + default n + depends on HUSH + help + Enable support for export '-n' option in hush. It is a bash extension. + +config HUSH_RANDOM_SUPPORT + bool "Pseudorandom generator and $RANDOM variable" + default n + depends on HUSH + help + Enable pseudorandom generator and dynamic variable "$RANDOM". + Each read of "$RANDOM" will generate a new pseudorandom value. + +config LASH + bool "lash (deprecated: aliased to hush)" + default n + select HUSH + help + lash is deprecated and will be removed, please migrate to hush. + +config MSH + bool "msh (deprecated: please use hush)" + default n + select HUSH + help + msh is deprecated and will be removed, please migrate to hush. + If there is a feature msh has but hush does not, please let us know. + +# The minix shell (adds just 30k) is quite complete and handles things +# like for/do/done, case/esac and all the things you expect a Bourne +# shell to do. It is not always pedantically correct about Bourne +# shell grammar (try running the shell testscript "tests/sh.testcases" +# on it and compare vs bash) but for most things it works quite well. +# It uses only vfork, so it can be used on uClinux systems. + + +config SH_MATH_SUPPORT + bool "POSIX math support" + default y + depends on ASH || HUSH + help + Enable math support in the shell via $((...)) syntax. + +config SH_MATH_SUPPORT_64 + bool "Extend POSIX math support to 64 bit" + default n + depends on SH_MATH_SUPPORT + help + Enable 64-bit math support in the shell. This will make the shell + slightly larger, but will allow computation with very large numbers. + This is not in POSIX, so do not rely on this in portable code. + +config FEATURE_SH_EXTRA_QUIET + bool "Hide message on interactive shell startup" + default n + depends on MSH || LASH || HUSH || ASH + help + Remove the busybox introduction when starting a shell. + +config FEATURE_SH_STANDALONE + bool "Standalone shell" + default n + depends on (MSH || LASH || HUSH || ASH) && FEATURE_PREFER_APPLETS + help + This option causes busybox shells to use busybox applets + in preference to executables in the PATH whenever possible. For + example, entering the command 'ifconfig' into the shell would cause + busybox to use the ifconfig busybox applet. Specifying the fully + qualified executable name, such as '/sbin/ifconfig' will still + execute the /sbin/ifconfig executable on the filesystem. This option + is generally used when creating a statically linked version of busybox + for use as a rescue shell, in the event that you screw up your system. + + This is implemented by re-execing /proc/self/exe (typically) + with right parameters. Some selected applets ("NOFORK" applets) + can even be executed without creating new process. + Instead, busybox will call _main() internally. + + However, this causes problems in chroot jails without mounted /proc + and with ps/top (command name can be shown as 'exe' for applets + started this way). +# untrue? +# Note that this will *also* cause applets to take precedence +# over shell builtins of the same name. So turning this on will +# eliminate any performance gained by turning on the builtin "echo" +# and "test" commands in ash. +# untrue? +# Note that when using this option, the shell will attempt to directly +# run '/bin/busybox'. If you do not have the busybox binary sitting in +# that exact location with that exact name, this option will not work at +# all. + +config FEATURE_SH_NOFORK + bool "Run 'nofork' applets directly" + default n + depends on (MSH || LASH || HUSH || ASH) && FEATURE_PREFER_APPLETS + help + This option causes busybox shells [currently only ash] + to not execute typical fork/exec/wait sequence, but call _main + directly, if possible. (Sometimes it is not possible: for example, + this is not possible in pipes). + + This will be done only for some applets (those which are marked + NOFORK in include/applets.h). + + This may significantly speed up some shell scripts. + + This feature is relatively new. Use with care. + +config CTTYHACK + bool "cttyhack" + default n + help + One common problem reported on the mailing list is "can't access tty; + job control turned off" error message which typically appears when + one tries to use shell with stdin/stdout opened to /dev/console. + This device is special - it cannot be a controlling tty. + + Proper solution is to use correct device instead of /dev/console. + + cttyhack provides "quick and dirty" solution to this problem. + It analyzes stdin with various ioctls, trying to determine whether + it is a /dev/ttyN or /dev/ttySN (virtual terminal or serial line). + If it detects one, it closes stdin/out/err and reopens that device. + Then it executes given program. Opening the device will make + that device a controlling tty. This may require cttyhack + to be a session leader. + + Example for /etc/inittab (for busybox init): + + ::respawn:/bin/cttyhack /bin/sh + + Giving controlling tty to shell running with PID 1: + + $ exec cttyhack sh + + Starting an interactive shell from boot shell script: + + setsid cttyhack sh + +endmenu diff --git a/shell/Kbuild b/shell/Kbuild deleted file mode 100644 index 8bdb68b11..000000000 --- a/shell/Kbuild +++ /dev/null @@ -1,14 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_ASH) += ash.o ash_ptr_hack.o shell_common.o -lib-$(CONFIG_HUSH) += hush.o match.o shell_common.o -lib-$(CONFIG_CTTYHACK) += cttyhack.o - -lib-$(CONFIG_SH_MATH_SUPPORT) += math.o -lib-$(CONFIG_ASH_RANDOM_SUPPORT) += random.o -lib-$(CONFIG_HUSH_RANDOM_SUPPORT) += random.o diff --git a/shell/Kbuild.src b/shell/Kbuild.src new file mode 100644 index 000000000..8bdb68b11 --- /dev/null +++ b/shell/Kbuild.src @@ -0,0 +1,14 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_ASH) += ash.o ash_ptr_hack.o shell_common.o +lib-$(CONFIG_HUSH) += hush.o match.o shell_common.o +lib-$(CONFIG_CTTYHACK) += cttyhack.o + +lib-$(CONFIG_SH_MATH_SUPPORT) += math.o +lib-$(CONFIG_ASH_RANDOM_SUPPORT) += random.o +lib-$(CONFIG_HUSH_RANDOM_SUPPORT) += random.o diff --git a/sysklogd/Config.in b/sysklogd/Config.in deleted file mode 100644 index b500d5471..000000000 --- a/sysklogd/Config.in +++ /dev/null @@ -1,128 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "System Logging Utilities" - -config SYSLOGD - bool "syslogd" - default n - help - The syslogd utility is used to record logs of all the - significant events that occur on a system. Every - message that is logged records the date and time of the - event, and will generally also record the name of the - application that generated the message. When used in - conjunction with klogd, messages from the Linux kernel - can also be recorded. This is terribly useful, - especially for finding what happened when something goes - wrong. And something almost always will go wrong if - you wait long enough.... - -config FEATURE_ROTATE_LOGFILE - bool "Rotate message files" - default n - depends on SYSLOGD - help - This enables syslogd to rotate the message files - on his own. No need to use an external rotatescript. - -config FEATURE_REMOTE_LOG - bool "Remote Log support" - default n - depends on SYSLOGD - help - When you enable this feature, the syslogd utility can - be used to send system log messages to another system - connected via a network. This allows the remote - machine to log all the system messages, which can be - terribly useful for reducing the number of serial - cables you use. It can also be a very good security - measure to prevent system logs from being tampered with - by an intruder. - -config FEATURE_SYSLOGD_DUP - bool "Support -D (drop dups) option" - default n - depends on SYSLOGD - help - Option -D instructs syslogd to drop consecutive messages - which are totally the same. - -config FEATURE_SYSLOGD_READ_BUFFER_SIZE - int "Read buffer size in bytes" - default 256 - range 256 20000 - depends on SYSLOGD - help - This option sets the size of the syslog read buffer. - Actual memory usage increases around five times the - change done here. - -config FEATURE_IPC_SYSLOG - bool "Circular Buffer support" - default n - depends on SYSLOGD - help - When you enable this feature, the syslogd utility will - use a circular buffer to record system log messages. - When the buffer is filled it will continue to overwrite - the oldest messages. This can be very useful for - systems with little or no permanent storage, since - otherwise system logs can eventually fill up your - entire filesystem, which may cause your system to - break badly. - -config FEATURE_IPC_SYSLOG_BUFFER_SIZE - int "Circular buffer size in Kbytes (minimum 4KB)" - default 16 - range 4 2147483647 - depends on FEATURE_IPC_SYSLOG - help - This option sets the size of the circular buffer - used to record system log messages. - -config LOGREAD - bool "logread" - default y - depends on FEATURE_IPC_SYSLOG - help - If you enabled Circular Buffer support, you almost - certainly want to enable this feature as well. This - utility will allow you to read the messages that are - stored in the syslogd circular buffer. - -config FEATURE_LOGREAD_REDUCED_LOCKING - bool "Double buffering" - default n - depends on LOGREAD - help - 'logread' ouput to slow serial terminals can have - side effects on syslog because of the semaphore. - This option make logread to double buffer copy - from circular buffer, minimizing semaphore - contention at some minor memory expense. - -config KLOGD - bool "klogd" - default n - help - klogd is a utility which intercepts and logs all - messages from the Linux kernel and sends the messages - out to the 'syslogd' utility so they can be logged. If - you wish to record the messages produced by the kernel, - you should enable this option. - -config LOGGER - bool "logger" - default n - select FEATURE_SYSLOG - help - The logger utility allows you to send arbitrary text - messages to the system log (i.e. the 'syslogd' utility) so - they can be logged. This is generally used to help locate - problems that occur within programs and scripts. - -endmenu - diff --git a/sysklogd/Config.src b/sysklogd/Config.src new file mode 100644 index 000000000..b500d5471 --- /dev/null +++ b/sysklogd/Config.src @@ -0,0 +1,128 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "System Logging Utilities" + +config SYSLOGD + bool "syslogd" + default n + help + The syslogd utility is used to record logs of all the + significant events that occur on a system. Every + message that is logged records the date and time of the + event, and will generally also record the name of the + application that generated the message. When used in + conjunction with klogd, messages from the Linux kernel + can also be recorded. This is terribly useful, + especially for finding what happened when something goes + wrong. And something almost always will go wrong if + you wait long enough.... + +config FEATURE_ROTATE_LOGFILE + bool "Rotate message files" + default n + depends on SYSLOGD + help + This enables syslogd to rotate the message files + on his own. No need to use an external rotatescript. + +config FEATURE_REMOTE_LOG + bool "Remote Log support" + default n + depends on SYSLOGD + help + When you enable this feature, the syslogd utility can + be used to send system log messages to another system + connected via a network. This allows the remote + machine to log all the system messages, which can be + terribly useful for reducing the number of serial + cables you use. It can also be a very good security + measure to prevent system logs from being tampered with + by an intruder. + +config FEATURE_SYSLOGD_DUP + bool "Support -D (drop dups) option" + default n + depends on SYSLOGD + help + Option -D instructs syslogd to drop consecutive messages + which are totally the same. + +config FEATURE_SYSLOGD_READ_BUFFER_SIZE + int "Read buffer size in bytes" + default 256 + range 256 20000 + depends on SYSLOGD + help + This option sets the size of the syslog read buffer. + Actual memory usage increases around five times the + change done here. + +config FEATURE_IPC_SYSLOG + bool "Circular Buffer support" + default n + depends on SYSLOGD + help + When you enable this feature, the syslogd utility will + use a circular buffer to record system log messages. + When the buffer is filled it will continue to overwrite + the oldest messages. This can be very useful for + systems with little or no permanent storage, since + otherwise system logs can eventually fill up your + entire filesystem, which may cause your system to + break badly. + +config FEATURE_IPC_SYSLOG_BUFFER_SIZE + int "Circular buffer size in Kbytes (minimum 4KB)" + default 16 + range 4 2147483647 + depends on FEATURE_IPC_SYSLOG + help + This option sets the size of the circular buffer + used to record system log messages. + +config LOGREAD + bool "logread" + default y + depends on FEATURE_IPC_SYSLOG + help + If you enabled Circular Buffer support, you almost + certainly want to enable this feature as well. This + utility will allow you to read the messages that are + stored in the syslogd circular buffer. + +config FEATURE_LOGREAD_REDUCED_LOCKING + bool "Double buffering" + default n + depends on LOGREAD + help + 'logread' ouput to slow serial terminals can have + side effects on syslog because of the semaphore. + This option make logread to double buffer copy + from circular buffer, minimizing semaphore + contention at some minor memory expense. + +config KLOGD + bool "klogd" + default n + help + klogd is a utility which intercepts and logs all + messages from the Linux kernel and sends the messages + out to the 'syslogd' utility so they can be logged. If + you wish to record the messages produced by the kernel, + you should enable this option. + +config LOGGER + bool "logger" + default n + select FEATURE_SYSLOG + help + The logger utility allows you to send arbitrary text + messages to the system log (i.e. the 'syslogd' utility) so + they can be logged. This is generally used to help locate + problems that occur within programs and scripts. + +endmenu + diff --git a/sysklogd/Kbuild b/sysklogd/Kbuild deleted file mode 100644 index d802198e6..000000000 --- a/sysklogd/Kbuild +++ /dev/null @@ -1,11 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_KLOGD) += klogd.o -lib-$(CONFIG_LOGGER) += syslogd_and_logger.o -lib-$(CONFIG_LOGREAD) += logread.o -lib-$(CONFIG_SYSLOGD) += syslogd_and_logger.o diff --git a/sysklogd/Kbuild.src b/sysklogd/Kbuild.src new file mode 100644 index 000000000..d802198e6 --- /dev/null +++ b/sysklogd/Kbuild.src @@ -0,0 +1,11 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_KLOGD) += klogd.o +lib-$(CONFIG_LOGGER) += syslogd_and_logger.o +lib-$(CONFIG_LOGREAD) += logread.o +lib-$(CONFIG_SYSLOGD) += syslogd_and_logger.o diff --git a/util-linux/Config.in b/util-linux/Config.in deleted file mode 100644 index a59cc1ddf..000000000 --- a/util-linux/Config.in +++ /dev/null @@ -1,940 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -menu "Linux System Utilities" - -config ACPID - bool "acpid" - default n - help - acpid listens to ACPI events coming either in textual form from - /proc/acpi/event (though it is marked deprecated it is still widely - used and _is_ a standard) or in binary form from specified evdevs - (just use /dev/input/event*). - - It parses the event to retrieve ACTION and a possible PARAMETER. - It then spawns /etc/acpi/[/] either via run-parts - (if the resulting path is a directory) or directly as an executable. - - N.B. acpid relies on run-parts so have the latter installed. - -config FEATURE_ACPID_COMPAT - bool "Accept and ignore redundant options" - default n - depends on ACPID - help - Accept and ignore compatibility options -g -m -s -S -v. - -config BLKID - bool "blkid" - default n - select VOLUMEID - help - Lists labels and UUIDs of all filesystems. - WARNING: - With all submodules selected, it will add ~8k to busybox. - -config DMESG - bool "dmesg" - default n - help - dmesg is used to examine or control the kernel ring buffer. When the - Linux kernel prints messages to the system log, they are stored in - the kernel ring buffer. You can use dmesg to print the kernel's ring - buffer, clear the kernel ring buffer, change the size of the kernel - ring buffer, and change the priority level at which kernel messages - are also logged to the system console. Enable this option if you - wish to enable the 'dmesg' utility. - -config FEATURE_DMESG_PRETTY - bool "Pretty dmesg output" - default y - depends on DMESG - help - If you wish to scrub the syslog level from the output, say 'Y' here. - The syslog level is a string prefixed to every line with the form - "<#>". - - With this option you will see: - # dmesg - Linux version 2.6.17.4 ..... - BIOS-provided physical RAM map: - BIOS-e820: 0000000000000000 - 000000000009f000 (usable) - - Without this option you will see: - # dmesg - <5>Linux version 2.6.17.4 ..... - <6>BIOS-provided physical RAM map: - <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) - -config FBSET - bool "fbset" - default n - help - fbset is used to show or change the settings of a Linux frame buffer - device. The frame buffer device provides a simple and unique - interface to access a graphics display. Enable this option - if you wish to enable the 'fbset' utility. - -config FEATURE_FBSET_FANCY - bool "Turn on extra fbset options" - default n - depends on FBSET - help - This option enables extended fbset options, allowing one to set the - framebuffer size, color depth, etc. interface to access a graphics - display. Enable this option if you wish to enable extended fbset - options. - -config FEATURE_FBSET_READMODE - bool "Turn on fbset readmode support" - default n - depends on FBSET - help - This option allows fbset to read the video mode database stored by - default as /etc/fb.modes, which can be used to set frame buffer - device to pre-defined video modes. - -config FDFLUSH - bool "fdflush" - default n - help - fdflush is only needed when changing media on slightly-broken - removable media drives. It is used to make Linux believe that a - hardware disk-change switch has been actuated, which causes Linux to - forget anything it has cached from the previous media. If you have - such a slightly-broken drive, you will need to run fdflush every time - you change a disk. Most people have working hardware and can safely - leave this disabled. - -config FDFORMAT - bool "fdformat" - default n - help - fdformat is used to low-level format a floppy disk. - -config FDISK - bool "fdisk" - default n - help - The fdisk utility is used to divide hard disks into one or more - logical disks, which are generally called partitions. This utility - can be used to list and edit the set of partitions or BSD style - 'disk slices' that are defined on a hard drive. - -config FDISK_SUPPORT_LARGE_DISKS - bool "Support over 4GB disks" - default y - depends on FDISK - help - Enable this option to support large disks > 4GB. - -config FEATURE_FDISK_WRITABLE - bool "Write support" - default y - depends on FDISK - help - Enabling this option allows you to create or change a partition table - and write those changes out to disk. If you leave this option - disabled, you will only be able to view the partition table. - -config FEATURE_AIX_LABEL - bool "Support AIX disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change AIX disklabels. - Most people can safely leave this option disabled. - -config FEATURE_SGI_LABEL - bool "Support SGI disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change SGI disklabels. - Most people can safely leave this option disabled. - -config FEATURE_SUN_LABEL - bool "Support SUN disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change SUN disklabels. - Most people can safely leave this option disabled. - -config FEATURE_OSF_LABEL - bool "Support BSD disklabels" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to create or change BSD disklabels - and define and edit BSD disk slices. - -config FEATURE_FDISK_ADVANCED - bool "Support expert mode" - default n - depends on FDISK && FEATURE_FDISK_WRITABLE - help - Enabling this option allows you to do terribly unsafe things like - define arbitrary drive geometry, move the beginning of data in a - partition, and similarly evil things. Unless you have a very good - reason you would be wise to leave this disabled. - -config FINDFS - bool "findfs" - default n - select VOLUMEID - help - Prints the name of a filesystem with given label or UUID. - WARNING: - With all submodules selected, it will add ~8k to busybox. - -config FLOCK - bool "flock" - default n - help - Manage locks from shell scripts - -config FREERAMDISK - bool "freeramdisk" - default n - help - Linux allows you to create ramdisks. This utility allows you to - delete them and completely free all memory that was used for the - ramdisk. For example, if you boot Linux into a ramdisk and later - pivot_root, you may want to free the memory that is allocated to the - ramdisk. If you have no use for freeing memory from a ramdisk, leave - this disabled. - -config FSCK_MINIX - bool "fsck_minix" - default n - help - The minix filesystem is a nice, small, compact, read-write filesystem - with little overhead. It is not a journaling filesystem however and - can experience corruption if it is not properly unmounted or if the - power goes off in the middle of a write. This utility allows you to - check for and attempt to repair any corruption that occurs to a minix - filesystem. - -config MKFS_EXT2 - bool "mkfs_ext2" - default n - help - Utility to create EXT2 filesystems. - -config MKFS_MINIX - bool "mkfs_minix" - default n - help - The minix filesystem is a nice, small, compact, read-write filesystem - with little overhead. If you wish to be able to create minix - filesystems this utility will do the job for you. - -comment "Minix filesystem support" - depends on FSCK_MINIX || MKFS_MINIX - -config FEATURE_MINIX2 - bool "Support Minix fs v2 (fsck_minix/mkfs_minix)" - default y - depends on FSCK_MINIX || MKFS_MINIX - help - If you wish to be able to create version 2 minix filesystems, enable - this. If you enabled 'mkfs_minix' then you almost certainly want to - be using the version 2 filesystem support. - -config MKFS_REISER - bool "mkfs_reiser" - default n - help - Utility to create ReiserFS filesystems. - -config MKFS_VFAT - bool "mkfs_vfat" - default n - help - Utility to create FAT32 filesystems. - -config GETOPT - bool "getopt" - default n - help - The getopt utility is used to break up (parse) options in command - lines to make it easy to write complex shell scripts that also check - for legal (and illegal) options. If you want to write horribly - complex shell scripts, or use some horribly complex shell script - written by others, this utility may be for you. Most people will - wisely leave this disabled. - -config FEATURE_GETOPT_LONG - bool "Support option -l" - default y if LONG_OPTS - depends on GETOPT - help - Enable support for long options (option -l). - -config HEXDUMP - bool "hexdump" - default n - help - The hexdump utility is used to display binary data in a readable - way that is comparable to the output from most hex editors. - -config FEATURE_HEXDUMP_REVERSE - bool "Support -R, reverse of 'hexdump -Cv'" - default n - depends on HEXDUMP - help - The hexdump utility is used to display binary data in an ascii - readable way. This option creates binary data from an ascii input. - NB: this option is non-standard. It's unwise to use it in scripts - aimed to be portable. - -config HD - bool "hd" - default n - select HEXDUMP - help - hd is an alias to hexdump -C. - -config HWCLOCK - bool "hwclock" - default n - help - The hwclock utility is used to read and set the hardware clock - on a system. This is primarily used to set the current time on - shutdown in the hardware clock, so the hardware will keep the - correct time when Linux is _not_ running. - -config FEATURE_HWCLOCK_LONG_OPTIONS - bool "Support long options (--hctosys,...)" - default n - depends on HWCLOCK && LONG_OPTS - help - By default, the hwclock utility only uses short options. If you - are overly fond of its long options, such as --hctosys, --utc, etc) - then enable this option. - -config FEATURE_HWCLOCK_ADJTIME_FHS - bool "Use FHS /var/lib/hwclock/adjtime" - default y - depends on HWCLOCK - help - Starting with FHS 2.3, the adjtime state file is supposed to exist - at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish - to use the FHS behavior, answer Y here, otherwise answer N for the - classic /etc/adjtime path. - - pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO - -config IPCRM - bool "ipcrm" - default n - select FEATURE_SUID - help - The ipcrm utility allows the removal of System V interprocess - communication (IPC) objects and the associated data structures - from the system. - -config IPCS - bool "ipcs" - default n - select FEATURE_SUID - help - The ipcs utility is used to provide information on the currently - allocated System V interprocess (IPC) objects in the system. - -config LOSETUP - bool "losetup" - default n - help - losetup is used to associate or detach a loop device with a regular - file or block device, and to query the status of a loop device. This - version does not currently support enabling data encryption. - -config LSPCI - bool "lspci" - default n - help - lspci is a utility for displaying information about PCI buses in the - system and devices connected to them. - - This version uses sysfs (/sys/bus/pci/devices) only. - -config LSUSB - bool "lsusb" - default n - help - lsusb is a utility for displaying information about USB buses in the - system and devices connected to them. - - This version uses sysfs (/sys/bus/usb/devices) only. - -config MDEV - bool "mdev" - default n - help - mdev is a mini-udev implementation for dynamically creating device - nodes in the /dev directory. - - For more information, please see docs/mdev.txt - -config FEATURE_MDEV_CONF - bool "Support /etc/mdev.conf" - default n - depends on MDEV - help - Add support for the mdev config file to control ownership and - permissions of the device nodes. - - For more information, please see docs/mdev.txt - -config FEATURE_MDEV_RENAME - bool "Support subdirs/symlinks" - default n - depends on FEATURE_MDEV_CONF - help - Add support for renaming devices and creating symlinks. - - For more information, please see docs/mdev.txt - -config FEATURE_MDEV_RENAME_REGEXP - bool "Support regular expressions substitutions when renaming device" - default n - depends on FEATURE_MDEV_RENAME - help - Add support for regular expressions substitutions when renaming - device. - -config FEATURE_MDEV_EXEC - bool "Support command execution at device addition/removal" - default n - depends on FEATURE_MDEV_CONF - help - This adds support for an optional field to /etc/mdev.conf for - executing commands when devices are created/removed. - - For more information, please see docs/mdev.txt - -config FEATURE_MDEV_LOAD_FIRMWARE - bool "Support loading of firmwares" - default n - depends on MDEV - help - Some devices need to load firmware before they can be usable. - - These devices will request userspace look up the files in - /lib/firmware/ and if it exists, send it to the kernel for - loading into the hardware. - -config MKSWAP - bool "mkswap" - default n - help - The mkswap utility is used to configure a file or disk partition as - Linux swap space. This allows Linux to use the entire file or - partition as if it were additional RAM, which can greatly increase - the capability of low-memory machines. This additional memory is - much slower than real RAM, but can be very helpful at preventing your - applications being killed by the Linux out of memory (OOM) killer. - Once you have created swap space using 'mkswap' you need to enable - the swap space using the 'swapon' utility. - -config FEATURE_MKSWAP_UUID - bool "UUID support" - default n - depends on MKSWAP - help - Generate swap spaces with universally unique identifiers. - -config MORE - bool "more" - default n - help - more is a simple utility which allows you to read text one screen - sized page at a time. If you want to read text that is larger than - the screen, and you are using anything faster than a 300 baud modem, - you will probably find this utility very helpful. If you don't have - any need to reading text files, you can leave this disabled. - -config FEATURE_USE_TERMIOS - bool "Use termios to manipulate the screen" - default y - depends on MORE || TOP - help - This option allows utilities such as 'more' and 'top' to determine - the size of the screen. If you leave this disabled, your utilities - that display things on the screen will be especially primitive and - will be unable to determine the current screen size, and will be - unable to move the cursor. - -config VOLUMEID - bool #No description makes it a hidden option - default n - -config FEATURE_VOLUMEID_EXT - bool "Ext filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_BTRFS - bool "btrfs filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_REISERFS - bool "Reiser filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_FAT - bool "fat filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_HFS - bool "hfs filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_JFS - bool "jfs filesystem" - default n - depends on VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_UFS -### bool "ufs filesystem" -### default n -### depends on VOLUMEID -### help -### TODO - -config FEATURE_VOLUMEID_XFS - bool "xfs filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_NTFS - bool "ntfs filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_ISO9660 - bool "iso9660 filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_UDF - bool "udf filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_LUKS - bool "luks filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_LINUXSWAP - bool "linux swap filesystem" - default n - depends on VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_LVM -### bool "lvm" -### default n -### depends on VOLUMEID -### help -### TODO - -config FEATURE_VOLUMEID_CRAMFS - bool "cramfs filesystem" - default n - depends on VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_HPFS -### bool "hpfs filesystem" -### default n -### depends on VOLUMEID -### help -### TODO - -config FEATURE_VOLUMEID_ROMFS - bool "romfs filesystem" - default n - depends on VOLUMEID - help - TODO - -config FEATURE_VOLUMEID_SYSV - bool "sysv filesystem" - default n - depends on VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_MINIX -### bool "minix filesystem" -### default n -### depends on VOLUMEID -### help -### TODO - -### These only detect partition tables - not used (yet?) -### config FEATURE_VOLUMEID_MAC -### bool "mac filesystem" -### default n -### depends on VOLUMEID -### help -### TODO -### -### config FEATURE_VOLUMEID_MSDOS -### bool "msdos filesystem" -### default n -### depends on VOLUMEID -### help -### TODO - -config FEATURE_VOLUMEID_OCFS2 - bool "ocfs2 filesystem" - default n - depends on VOLUMEID - help - TODO - -### config FEATURE_VOLUMEID_HIGHPOINTRAID -### bool "highpoint raid" -### default n -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_ISWRAID -### bool "intel raid" -### default n -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_LSIRAID -### bool "lsi raid" -### default n -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_VIARAID -### bool "via raid" -### default n -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_SILICONRAID -### bool "silicon raid" -### default n -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_NVIDIARAID -### bool "nvidia raid" -### default n -### depends on VOLUMEID -### help -### TODO - -### config FEATURE_VOLUMEID_PROMISERAID -### bool "promise raid" -### default n -### depends on VOLUMEID -### help -### TODO - -config FEATURE_VOLUMEID_LINUXRAID - bool "linuxraid" - default n - depends on VOLUMEID - help - TODO - -config MOUNT - bool "mount" - default n - help - All files and filesystems in Unix are arranged into one big directory - tree. The 'mount' utility is used to graft a filesystem onto a - particular part of the tree. A filesystem can either live on a block - device, or it can be accessible over the network, as is the case with - NFS filesystems. Most people using BusyBox will also want to enable - the 'mount' utility. - -config FEATURE_MOUNT_FAKE - bool "Support option -f" - default n - depends on MOUNT - help - Enable support for faking a file system mount. - -config FEATURE_MOUNT_VERBOSE - bool "Support option -v" - default n - depends on MOUNT - help - Enable multi-level -v[vv...] verbose messages. Useful if you - debug mount problems and want to see what is exactly passed - to the kernel. - -config FEATURE_MOUNT_HELPERS - bool "Support mount helpers" - default n - depends on MOUNT - help - Enable mounting of virtual file systems via external helpers. - E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call - "obexfs -b00.11.22.33.44.55 /mnt" - Also "mount -t sometype [-o opts] fs /mnt" will try - "sometype [-o opts] fs /mnt" if simple mount syscall fails. - The idea is to use such virtual filesystems in /etc/fstab. - -config FEATURE_MOUNT_LABEL - bool "Support specifiying devices by label or UUID" - default n - depends on MOUNT - select VOLUMEID - help - This allows for specifying a device by label or uuid, rather than by - name. This feature utilizes the same functionality as blkid/findfs. - This also enables label or uuid support for swapon. - -config FEATURE_MOUNT_NFS - bool "Support mounting NFS file systems" - default n - depends on MOUNT - select FEATURE_HAVE_RPC - select FEATURE_SYSLOG - help - Enable mounting of NFS file systems. - -config FEATURE_MOUNT_CIFS - bool "Support mounting CIFS/SMB file systems" - default n - depends on MOUNT - help - Enable support for samba mounts. - -config FEATURE_MOUNT_FLAGS - depends on MOUNT - bool "Support lots of -o flags in mount" - default y - help - Without this, mount only supports ro/rw/remount. With this, it - supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime, - noatime, diratime, nodiratime, loud, bind, move, shared, slave, - private, unbindable, rshared, rslave, rprivate, and runbindable. - -config FEATURE_MOUNT_FSTAB - depends on MOUNT - bool "Support /etc/fstab and -a" - default y - help - Support mount all and looking for files in /etc/fstab. - -config PIVOT_ROOT - bool "pivot_root" - default n - help - The pivot_root utility swaps the mount points for the root filesystem - with some other mounted filesystem. This allows you to do all sorts - of wild and crazy things with your Linux system and is far more - powerful than 'chroot'. - - Note: This is for initrd in linux 2.4. Under initramfs (introduced - in linux 2.6) use switch_root instead. - -config RDATE - bool "rdate" - default n - help - The rdate utility allows you to synchronize the date and time of your - system clock with the date and time of a remote networked system using - the RFC868 protocol, which is built into the inetd daemon on most - systems. - -config RDEV - bool "rdev" - default n - help - Print the device node associated with the filesystem mounted at '/'. - -config READPROFILE - bool "readprofile" - default n - help - This allows you to parse /proc/profile for basic profiling. - -config RTCWAKE - bool "rtcwake" - default n - help - Enter a system sleep state until specified wakeup time. - -config SCRIPT - bool "script" - default n - help - The script makes typescript of terminal session. - -config SCRIPTREPLAY - bool "scriptreplay" - default n - help - This program replays a typescript, using timing information - given by script -t. - -config SETARCH - bool "setarch" - default n - help - The linux32 utility is used to create a 32bit environment for the - specified program (usually a shell). It only makes sense to have - this util on a system that supports both 64bit and 32bit userland - (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...). - -config SWAPONOFF - bool "swaponoff" - default n - help - This option enables both the 'swapon' and the 'swapoff' utilities. - Once you have created some swap space using 'mkswap', you also need - to enable your swap space with the 'swapon' utility. The 'swapoff' - utility is used, typically at system shutdown, to disable any swap - space. If you are not using any swap space, you can leave this - option disabled. - -config FEATURE_SWAPON_PRI - bool "Support priority option -p" - default n - depends on SWAPONOFF - help - Enable support for setting swap device priority in swapon. - -config SWITCH_ROOT - bool "switch_root" - default n - help - The switch_root utility is used from initramfs to select a new - root device. Under initramfs, you have to use this instead of - pivot_root. (Stop reading here if you don't care why.) - - Booting with initramfs extracts a gzipped cpio archive into rootfs - (which is a variant of ramfs/tmpfs). Because rootfs can't be moved - or unmounted*, pivot_root will not work from initramfs. Instead, - switch_root deletes everything out of rootfs (including itself), - does a mount --move that overmounts rootfs with the new root, and - then execs the specified init program. - - * Because the Linux kernel uses rootfs internally as the starting - and ending point for searching through the kernel's doubly linked - list of active mount points. That's why. - -config UMOUNT - bool "umount" - default n - help - When you want to remove a mounted filesystem from its current mount - point, for example when you are shutting down the system, the - 'umount' utility is the tool to use. If you enabled the 'mount' - utility, you almost certainly also want to enable 'umount'. - -config FEATURE_UMOUNT_ALL - bool "Support option -a" - default n - depends on UMOUNT - help - Support -a option to unmount all currently mounted filesystems. - -comment "Common options for mount/umount" - depends on MOUNT || UMOUNT - -config FEATURE_MOUNT_LOOP - bool "Support loopback mounts" - default n - depends on MOUNT || UMOUNT - help - Enabling this feature allows automatic mounting of files (containing - filesystem images) via the linux kernel's loopback devices. - The mount command will detect you are trying to mount a file instead - of a block device, and transparently associate the file with a - loopback device. The umount command will also free that loopback - device. - - You can still use the 'losetup' utility (to manually associate files - with loop devices) if you need to do something advanced, such as - specify an offset or cryptographic options to the loopback device. - (If you don't want umount to free the loop device, use "umount -D".) - -config FEATURE_MOUNT_LOOP_CREATE - bool "Create new loopback devices if needed" - default n - depends on FEATURE_MOUNT_LOOP - help - Linux kernels >= 2.6.24 support unlimited loopback devices. They are - allocated for use when trying to use a loop device. The loop device - must however exist. - - This feature lets mount to try to create next /dev/loopN device - if it does not find a free one. - -config FEATURE_MTAB_SUPPORT - bool "Support for the old /etc/mtab file" - default n - depends on MOUNT || UMOUNT - select FEATURE_MOUNT_FAKE - help - Historically, Unix systems kept track of the currently mounted - partitions in the file "/etc/mtab". These days, the kernel exports - the list of currently mounted partitions in "/proc/mounts", rendering - the old mtab file obsolete. (In modern systems, /etc/mtab should be - a symlink to /proc/mounts.) - - The only reason to have mount maintain an /etc/mtab file itself is if - your stripped-down embedded system does not have a /proc directory. - If you must use this, keep in mind it's inherently brittle (for - example a mount under chroot won't update it), can't handle modern - features like separate per-process filesystem namespaces, requires - that your /etc directory be writeable, tends to get easily confused - by --bind or --move mounts, won't update if you rename a directory - that contains a mount point, and so on. (In brief: avoid.) - - About the only reason to use this is if you've removed /proc from - your kernel. - -endmenu diff --git a/util-linux/Config.src b/util-linux/Config.src new file mode 100644 index 000000000..a59cc1ddf --- /dev/null +++ b/util-linux/Config.src @@ -0,0 +1,940 @@ +# +# For a description of the syntax of this configuration file, +# see scripts/kbuild/config-language.txt. +# + +menu "Linux System Utilities" + +config ACPID + bool "acpid" + default n + help + acpid listens to ACPI events coming either in textual form from + /proc/acpi/event (though it is marked deprecated it is still widely + used and _is_ a standard) or in binary form from specified evdevs + (just use /dev/input/event*). + + It parses the event to retrieve ACTION and a possible PARAMETER. + It then spawns /etc/acpi/[/] either via run-parts + (if the resulting path is a directory) or directly as an executable. + + N.B. acpid relies on run-parts so have the latter installed. + +config FEATURE_ACPID_COMPAT + bool "Accept and ignore redundant options" + default n + depends on ACPID + help + Accept and ignore compatibility options -g -m -s -S -v. + +config BLKID + bool "blkid" + default n + select VOLUMEID + help + Lists labels and UUIDs of all filesystems. + WARNING: + With all submodules selected, it will add ~8k to busybox. + +config DMESG + bool "dmesg" + default n + help + dmesg is used to examine or control the kernel ring buffer. When the + Linux kernel prints messages to the system log, they are stored in + the kernel ring buffer. You can use dmesg to print the kernel's ring + buffer, clear the kernel ring buffer, change the size of the kernel + ring buffer, and change the priority level at which kernel messages + are also logged to the system console. Enable this option if you + wish to enable the 'dmesg' utility. + +config FEATURE_DMESG_PRETTY + bool "Pretty dmesg output" + default y + depends on DMESG + help + If you wish to scrub the syslog level from the output, say 'Y' here. + The syslog level is a string prefixed to every line with the form + "<#>". + + With this option you will see: + # dmesg + Linux version 2.6.17.4 ..... + BIOS-provided physical RAM map: + BIOS-e820: 0000000000000000 - 000000000009f000 (usable) + + Without this option you will see: + # dmesg + <5>Linux version 2.6.17.4 ..... + <6>BIOS-provided physical RAM map: + <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable) + +config FBSET + bool "fbset" + default n + help + fbset is used to show or change the settings of a Linux frame buffer + device. The frame buffer device provides a simple and unique + interface to access a graphics display. Enable this option + if you wish to enable the 'fbset' utility. + +config FEATURE_FBSET_FANCY + bool "Turn on extra fbset options" + default n + depends on FBSET + help + This option enables extended fbset options, allowing one to set the + framebuffer size, color depth, etc. interface to access a graphics + display. Enable this option if you wish to enable extended fbset + options. + +config FEATURE_FBSET_READMODE + bool "Turn on fbset readmode support" + default n + depends on FBSET + help + This option allows fbset to read the video mode database stored by + default as /etc/fb.modes, which can be used to set frame buffer + device to pre-defined video modes. + +config FDFLUSH + bool "fdflush" + default n + help + fdflush is only needed when changing media on slightly-broken + removable media drives. It is used to make Linux believe that a + hardware disk-change switch has been actuated, which causes Linux to + forget anything it has cached from the previous media. If you have + such a slightly-broken drive, you will need to run fdflush every time + you change a disk. Most people have working hardware and can safely + leave this disabled. + +config FDFORMAT + bool "fdformat" + default n + help + fdformat is used to low-level format a floppy disk. + +config FDISK + bool "fdisk" + default n + help + The fdisk utility is used to divide hard disks into one or more + logical disks, which are generally called partitions. This utility + can be used to list and edit the set of partitions or BSD style + 'disk slices' that are defined on a hard drive. + +config FDISK_SUPPORT_LARGE_DISKS + bool "Support over 4GB disks" + default y + depends on FDISK + help + Enable this option to support large disks > 4GB. + +config FEATURE_FDISK_WRITABLE + bool "Write support" + default y + depends on FDISK + help + Enabling this option allows you to create or change a partition table + and write those changes out to disk. If you leave this option + disabled, you will only be able to view the partition table. + +config FEATURE_AIX_LABEL + bool "Support AIX disklabels" + default n + depends on FDISK && FEATURE_FDISK_WRITABLE + help + Enabling this option allows you to create or change AIX disklabels. + Most people can safely leave this option disabled. + +config FEATURE_SGI_LABEL + bool "Support SGI disklabels" + default n + depends on FDISK && FEATURE_FDISK_WRITABLE + help + Enabling this option allows you to create or change SGI disklabels. + Most people can safely leave this option disabled. + +config FEATURE_SUN_LABEL + bool "Support SUN disklabels" + default n + depends on FDISK && FEATURE_FDISK_WRITABLE + help + Enabling this option allows you to create or change SUN disklabels. + Most people can safely leave this option disabled. + +config FEATURE_OSF_LABEL + bool "Support BSD disklabels" + default n + depends on FDISK && FEATURE_FDISK_WRITABLE + help + Enabling this option allows you to create or change BSD disklabels + and define and edit BSD disk slices. + +config FEATURE_FDISK_ADVANCED + bool "Support expert mode" + default n + depends on FDISK && FEATURE_FDISK_WRITABLE + help + Enabling this option allows you to do terribly unsafe things like + define arbitrary drive geometry, move the beginning of data in a + partition, and similarly evil things. Unless you have a very good + reason you would be wise to leave this disabled. + +config FINDFS + bool "findfs" + default n + select VOLUMEID + help + Prints the name of a filesystem with given label or UUID. + WARNING: + With all submodules selected, it will add ~8k to busybox. + +config FLOCK + bool "flock" + default n + help + Manage locks from shell scripts + +config FREERAMDISK + bool "freeramdisk" + default n + help + Linux allows you to create ramdisks. This utility allows you to + delete them and completely free all memory that was used for the + ramdisk. For example, if you boot Linux into a ramdisk and later + pivot_root, you may want to free the memory that is allocated to the + ramdisk. If you have no use for freeing memory from a ramdisk, leave + this disabled. + +config FSCK_MINIX + bool "fsck_minix" + default n + help + The minix filesystem is a nice, small, compact, read-write filesystem + with little overhead. It is not a journaling filesystem however and + can experience corruption if it is not properly unmounted or if the + power goes off in the middle of a write. This utility allows you to + check for and attempt to repair any corruption that occurs to a minix + filesystem. + +config MKFS_EXT2 + bool "mkfs_ext2" + default n + help + Utility to create EXT2 filesystems. + +config MKFS_MINIX + bool "mkfs_minix" + default n + help + The minix filesystem is a nice, small, compact, read-write filesystem + with little overhead. If you wish to be able to create minix + filesystems this utility will do the job for you. + +comment "Minix filesystem support" + depends on FSCK_MINIX || MKFS_MINIX + +config FEATURE_MINIX2 + bool "Support Minix fs v2 (fsck_minix/mkfs_minix)" + default y + depends on FSCK_MINIX || MKFS_MINIX + help + If you wish to be able to create version 2 minix filesystems, enable + this. If you enabled 'mkfs_minix' then you almost certainly want to + be using the version 2 filesystem support. + +config MKFS_REISER + bool "mkfs_reiser" + default n + help + Utility to create ReiserFS filesystems. + +config MKFS_VFAT + bool "mkfs_vfat" + default n + help + Utility to create FAT32 filesystems. + +config GETOPT + bool "getopt" + default n + help + The getopt utility is used to break up (parse) options in command + lines to make it easy to write complex shell scripts that also check + for legal (and illegal) options. If you want to write horribly + complex shell scripts, or use some horribly complex shell script + written by others, this utility may be for you. Most people will + wisely leave this disabled. + +config FEATURE_GETOPT_LONG + bool "Support option -l" + default y if LONG_OPTS + depends on GETOPT + help + Enable support for long options (option -l). + +config HEXDUMP + bool "hexdump" + default n + help + The hexdump utility is used to display binary data in a readable + way that is comparable to the output from most hex editors. + +config FEATURE_HEXDUMP_REVERSE + bool "Support -R, reverse of 'hexdump -Cv'" + default n + depends on HEXDUMP + help + The hexdump utility is used to display binary data in an ascii + readable way. This option creates binary data from an ascii input. + NB: this option is non-standard. It's unwise to use it in scripts + aimed to be portable. + +config HD + bool "hd" + default n + select HEXDUMP + help + hd is an alias to hexdump -C. + +config HWCLOCK + bool "hwclock" + default n + help + The hwclock utility is used to read and set the hardware clock + on a system. This is primarily used to set the current time on + shutdown in the hardware clock, so the hardware will keep the + correct time when Linux is _not_ running. + +config FEATURE_HWCLOCK_LONG_OPTIONS + bool "Support long options (--hctosys,...)" + default n + depends on HWCLOCK && LONG_OPTS + help + By default, the hwclock utility only uses short options. If you + are overly fond of its long options, such as --hctosys, --utc, etc) + then enable this option. + +config FEATURE_HWCLOCK_ADJTIME_FHS + bool "Use FHS /var/lib/hwclock/adjtime" + default y + depends on HWCLOCK + help + Starting with FHS 2.3, the adjtime state file is supposed to exist + at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish + to use the FHS behavior, answer Y here, otherwise answer N for the + classic /etc/adjtime path. + + pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO + +config IPCRM + bool "ipcrm" + default n + select FEATURE_SUID + help + The ipcrm utility allows the removal of System V interprocess + communication (IPC) objects and the associated data structures + from the system. + +config IPCS + bool "ipcs" + default n + select FEATURE_SUID + help + The ipcs utility is used to provide information on the currently + allocated System V interprocess (IPC) objects in the system. + +config LOSETUP + bool "losetup" + default n + help + losetup is used to associate or detach a loop device with a regular + file or block device, and to query the status of a loop device. This + version does not currently support enabling data encryption. + +config LSPCI + bool "lspci" + default n + help + lspci is a utility for displaying information about PCI buses in the + system and devices connected to them. + + This version uses sysfs (/sys/bus/pci/devices) only. + +config LSUSB + bool "lsusb" + default n + help + lsusb is a utility for displaying information about USB buses in the + system and devices connected to them. + + This version uses sysfs (/sys/bus/usb/devices) only. + +config MDEV + bool "mdev" + default n + help + mdev is a mini-udev implementation for dynamically creating device + nodes in the /dev directory. + + For more information, please see docs/mdev.txt + +config FEATURE_MDEV_CONF + bool "Support /etc/mdev.conf" + default n + depends on MDEV + help + Add support for the mdev config file to control ownership and + permissions of the device nodes. + + For more information, please see docs/mdev.txt + +config FEATURE_MDEV_RENAME + bool "Support subdirs/symlinks" + default n + depends on FEATURE_MDEV_CONF + help + Add support for renaming devices and creating symlinks. + + For more information, please see docs/mdev.txt + +config FEATURE_MDEV_RENAME_REGEXP + bool "Support regular expressions substitutions when renaming device" + default n + depends on FEATURE_MDEV_RENAME + help + Add support for regular expressions substitutions when renaming + device. + +config FEATURE_MDEV_EXEC + bool "Support command execution at device addition/removal" + default n + depends on FEATURE_MDEV_CONF + help + This adds support for an optional field to /etc/mdev.conf for + executing commands when devices are created/removed. + + For more information, please see docs/mdev.txt + +config FEATURE_MDEV_LOAD_FIRMWARE + bool "Support loading of firmwares" + default n + depends on MDEV + help + Some devices need to load firmware before they can be usable. + + These devices will request userspace look up the files in + /lib/firmware/ and if it exists, send it to the kernel for + loading into the hardware. + +config MKSWAP + bool "mkswap" + default n + help + The mkswap utility is used to configure a file or disk partition as + Linux swap space. This allows Linux to use the entire file or + partition as if it were additional RAM, which can greatly increase + the capability of low-memory machines. This additional memory is + much slower than real RAM, but can be very helpful at preventing your + applications being killed by the Linux out of memory (OOM) killer. + Once you have created swap space using 'mkswap' you need to enable + the swap space using the 'swapon' utility. + +config FEATURE_MKSWAP_UUID + bool "UUID support" + default n + depends on MKSWAP + help + Generate swap spaces with universally unique identifiers. + +config MORE + bool "more" + default n + help + more is a simple utility which allows you to read text one screen + sized page at a time. If you want to read text that is larger than + the screen, and you are using anything faster than a 300 baud modem, + you will probably find this utility very helpful. If you don't have + any need to reading text files, you can leave this disabled. + +config FEATURE_USE_TERMIOS + bool "Use termios to manipulate the screen" + default y + depends on MORE || TOP + help + This option allows utilities such as 'more' and 'top' to determine + the size of the screen. If you leave this disabled, your utilities + that display things on the screen will be especially primitive and + will be unable to determine the current screen size, and will be + unable to move the cursor. + +config VOLUMEID + bool #No description makes it a hidden option + default n + +config FEATURE_VOLUMEID_EXT + bool "Ext filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_BTRFS + bool "btrfs filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_REISERFS + bool "Reiser filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_FAT + bool "fat filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_HFS + bool "hfs filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_JFS + bool "jfs filesystem" + default n + depends on VOLUMEID + help + TODO + +### config FEATURE_VOLUMEID_UFS +### bool "ufs filesystem" +### default n +### depends on VOLUMEID +### help +### TODO + +config FEATURE_VOLUMEID_XFS + bool "xfs filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_NTFS + bool "ntfs filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_ISO9660 + bool "iso9660 filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_UDF + bool "udf filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_LUKS + bool "luks filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_LINUXSWAP + bool "linux swap filesystem" + default n + depends on VOLUMEID + help + TODO + +### config FEATURE_VOLUMEID_LVM +### bool "lvm" +### default n +### depends on VOLUMEID +### help +### TODO + +config FEATURE_VOLUMEID_CRAMFS + bool "cramfs filesystem" + default n + depends on VOLUMEID + help + TODO + +### config FEATURE_VOLUMEID_HPFS +### bool "hpfs filesystem" +### default n +### depends on VOLUMEID +### help +### TODO + +config FEATURE_VOLUMEID_ROMFS + bool "romfs filesystem" + default n + depends on VOLUMEID + help + TODO + +config FEATURE_VOLUMEID_SYSV + bool "sysv filesystem" + default n + depends on VOLUMEID + help + TODO + +### config FEATURE_VOLUMEID_MINIX +### bool "minix filesystem" +### default n +### depends on VOLUMEID +### help +### TODO + +### These only detect partition tables - not used (yet?) +### config FEATURE_VOLUMEID_MAC +### bool "mac filesystem" +### default n +### depends on VOLUMEID +### help +### TODO +### +### config FEATURE_VOLUMEID_MSDOS +### bool "msdos filesystem" +### default n +### depends on VOLUMEID +### help +### TODO + +config FEATURE_VOLUMEID_OCFS2 + bool "ocfs2 filesystem" + default n + depends on VOLUMEID + help + TODO + +### config FEATURE_VOLUMEID_HIGHPOINTRAID +### bool "highpoint raid" +### default n +### depends on VOLUMEID +### help +### TODO + +### config FEATURE_VOLUMEID_ISWRAID +### bool "intel raid" +### default n +### depends on VOLUMEID +### help +### TODO + +### config FEATURE_VOLUMEID_LSIRAID +### bool "lsi raid" +### default n +### depends on VOLUMEID +### help +### TODO + +### config FEATURE_VOLUMEID_VIARAID +### bool "via raid" +### default n +### depends on VOLUMEID +### help +### TODO + +### config FEATURE_VOLUMEID_SILICONRAID +### bool "silicon raid" +### default n +### depends on VOLUMEID +### help +### TODO + +### config FEATURE_VOLUMEID_NVIDIARAID +### bool "nvidia raid" +### default n +### depends on VOLUMEID +### help +### TODO + +### config FEATURE_VOLUMEID_PROMISERAID +### bool "promise raid" +### default n +### depends on VOLUMEID +### help +### TODO + +config FEATURE_VOLUMEID_LINUXRAID + bool "linuxraid" + default n + depends on VOLUMEID + help + TODO + +config MOUNT + bool "mount" + default n + help + All files and filesystems in Unix are arranged into one big directory + tree. The 'mount' utility is used to graft a filesystem onto a + particular part of the tree. A filesystem can either live on a block + device, or it can be accessible over the network, as is the case with + NFS filesystems. Most people using BusyBox will also want to enable + the 'mount' utility. + +config FEATURE_MOUNT_FAKE + bool "Support option -f" + default n + depends on MOUNT + help + Enable support for faking a file system mount. + +config FEATURE_MOUNT_VERBOSE + bool "Support option -v" + default n + depends on MOUNT + help + Enable multi-level -v[vv...] verbose messages. Useful if you + debug mount problems and want to see what is exactly passed + to the kernel. + +config FEATURE_MOUNT_HELPERS + bool "Support mount helpers" + default n + depends on MOUNT + help + Enable mounting of virtual file systems via external helpers. + E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call + "obexfs -b00.11.22.33.44.55 /mnt" + Also "mount -t sometype [-o opts] fs /mnt" will try + "sometype [-o opts] fs /mnt" if simple mount syscall fails. + The idea is to use such virtual filesystems in /etc/fstab. + +config FEATURE_MOUNT_LABEL + bool "Support specifiying devices by label or UUID" + default n + depends on MOUNT + select VOLUMEID + help + This allows for specifying a device by label or uuid, rather than by + name. This feature utilizes the same functionality as blkid/findfs. + This also enables label or uuid support for swapon. + +config FEATURE_MOUNT_NFS + bool "Support mounting NFS file systems" + default n + depends on MOUNT + select FEATURE_HAVE_RPC + select FEATURE_SYSLOG + help + Enable mounting of NFS file systems. + +config FEATURE_MOUNT_CIFS + bool "Support mounting CIFS/SMB file systems" + default n + depends on MOUNT + help + Enable support for samba mounts. + +config FEATURE_MOUNT_FLAGS + depends on MOUNT + bool "Support lots of -o flags in mount" + default y + help + Without this, mount only supports ro/rw/remount. With this, it + supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime, + noatime, diratime, nodiratime, loud, bind, move, shared, slave, + private, unbindable, rshared, rslave, rprivate, and runbindable. + +config FEATURE_MOUNT_FSTAB + depends on MOUNT + bool "Support /etc/fstab and -a" + default y + help + Support mount all and looking for files in /etc/fstab. + +config PIVOT_ROOT + bool "pivot_root" + default n + help + The pivot_root utility swaps the mount points for the root filesystem + with some other mounted filesystem. This allows you to do all sorts + of wild and crazy things with your Linux system and is far more + powerful than 'chroot'. + + Note: This is for initrd in linux 2.4. Under initramfs (introduced + in linux 2.6) use switch_root instead. + +config RDATE + bool "rdate" + default n + help + The rdate utility allows you to synchronize the date and time of your + system clock with the date and time of a remote networked system using + the RFC868 protocol, which is built into the inetd daemon on most + systems. + +config RDEV + bool "rdev" + default n + help + Print the device node associated with the filesystem mounted at '/'. + +config READPROFILE + bool "readprofile" + default n + help + This allows you to parse /proc/profile for basic profiling. + +config RTCWAKE + bool "rtcwake" + default n + help + Enter a system sleep state until specified wakeup time. + +config SCRIPT + bool "script" + default n + help + The script makes typescript of terminal session. + +config SCRIPTREPLAY + bool "scriptreplay" + default n + help + This program replays a typescript, using timing information + given by script -t. + +config SETARCH + bool "setarch" + default n + help + The linux32 utility is used to create a 32bit environment for the + specified program (usually a shell). It only makes sense to have + this util on a system that supports both 64bit and 32bit userland + (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...). + +config SWAPONOFF + bool "swaponoff" + default n + help + This option enables both the 'swapon' and the 'swapoff' utilities. + Once you have created some swap space using 'mkswap', you also need + to enable your swap space with the 'swapon' utility. The 'swapoff' + utility is used, typically at system shutdown, to disable any swap + space. If you are not using any swap space, you can leave this + option disabled. + +config FEATURE_SWAPON_PRI + bool "Support priority option -p" + default n + depends on SWAPONOFF + help + Enable support for setting swap device priority in swapon. + +config SWITCH_ROOT + bool "switch_root" + default n + help + The switch_root utility is used from initramfs to select a new + root device. Under initramfs, you have to use this instead of + pivot_root. (Stop reading here if you don't care why.) + + Booting with initramfs extracts a gzipped cpio archive into rootfs + (which is a variant of ramfs/tmpfs). Because rootfs can't be moved + or unmounted*, pivot_root will not work from initramfs. Instead, + switch_root deletes everything out of rootfs (including itself), + does a mount --move that overmounts rootfs with the new root, and + then execs the specified init program. + + * Because the Linux kernel uses rootfs internally as the starting + and ending point for searching through the kernel's doubly linked + list of active mount points. That's why. + +config UMOUNT + bool "umount" + default n + help + When you want to remove a mounted filesystem from its current mount + point, for example when you are shutting down the system, the + 'umount' utility is the tool to use. If you enabled the 'mount' + utility, you almost certainly also want to enable 'umount'. + +config FEATURE_UMOUNT_ALL + bool "Support option -a" + default n + depends on UMOUNT + help + Support -a option to unmount all currently mounted filesystems. + +comment "Common options for mount/umount" + depends on MOUNT || UMOUNT + +config FEATURE_MOUNT_LOOP + bool "Support loopback mounts" + default n + depends on MOUNT || UMOUNT + help + Enabling this feature allows automatic mounting of files (containing + filesystem images) via the linux kernel's loopback devices. + The mount command will detect you are trying to mount a file instead + of a block device, and transparently associate the file with a + loopback device. The umount command will also free that loopback + device. + + You can still use the 'losetup' utility (to manually associate files + with loop devices) if you need to do something advanced, such as + specify an offset or cryptographic options to the loopback device. + (If you don't want umount to free the loop device, use "umount -D".) + +config FEATURE_MOUNT_LOOP_CREATE + bool "Create new loopback devices if needed" + default n + depends on FEATURE_MOUNT_LOOP + help + Linux kernels >= 2.6.24 support unlimited loopback devices. They are + allocated for use when trying to use a loop device. The loop device + must however exist. + + This feature lets mount to try to create next /dev/loopN device + if it does not find a free one. + +config FEATURE_MTAB_SUPPORT + bool "Support for the old /etc/mtab file" + default n + depends on MOUNT || UMOUNT + select FEATURE_MOUNT_FAKE + help + Historically, Unix systems kept track of the currently mounted + partitions in the file "/etc/mtab". These days, the kernel exports + the list of currently mounted partitions in "/proc/mounts", rendering + the old mtab file obsolete. (In modern systems, /etc/mtab should be + a symlink to /proc/mounts.) + + The only reason to have mount maintain an /etc/mtab file itself is if + your stripped-down embedded system does not have a /proc directory. + If you must use this, keep in mind it's inherently brittle (for + example a mount under chroot won't update it), can't handle modern + features like separate per-process filesystem namespaces, requires + that your /etc directory be writeable, tends to get easily confused + by --bind or --move mounts, won't update if you rename a directory + that contains a mount point, and so on. (In brief: avoid.) + + About the only reason to use this is if you've removed /proc from + your kernel. + +endmenu diff --git a/util-linux/Kbuild b/util-linux/Kbuild deleted file mode 100644 index 4fa392398..000000000 --- a/util-linux/Kbuild +++ /dev/null @@ -1,45 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= -lib-$(CONFIG_ACPID) += acpid.o -lib-$(CONFIG_BLKID) += blkid.o -lib-$(CONFIG_DMESG) += dmesg.o -lib-$(CONFIG_FBSET) += fbset.o -lib-$(CONFIG_FDFLUSH) += freeramdisk.o -lib-$(CONFIG_FDFORMAT) += fdformat.o -lib-$(CONFIG_FDISK) += fdisk.o -lib-$(CONFIG_FINDFS) += findfs.o -lib-$(CONFIG_FLOCK) += flock.o -lib-$(CONFIG_FREERAMDISK) += freeramdisk.o -lib-$(CONFIG_FSCK_MINIX) += fsck_minix.o -lib-$(CONFIG_GETOPT) += getopt.o -lib-$(CONFIG_HEXDUMP) += hexdump.o -lib-$(CONFIG_HWCLOCK) += hwclock.o -lib-$(CONFIG_IPCRM) += ipcrm.o -lib-$(CONFIG_IPCS) += ipcs.o -lib-$(CONFIG_LOSETUP) += losetup.o -lib-$(CONFIG_LSPCI) += lspci.o -lib-$(CONFIG_LSUSB) += lsusb.o -lib-$(CONFIG_MDEV) += mdev.o -lib-$(CONFIG_MKFS_EXT2) += mkfs_ext2.o -lib-$(CONFIG_MKFS_MINIX) += mkfs_minix.o -lib-$(CONFIG_MKFS_REISER) += mkfs_reiser.o -lib-$(CONFIG_MKFS_VFAT) += mkfs_vfat.o -lib-$(CONFIG_MKSWAP) += mkswap.o -lib-$(CONFIG_MORE) += more.o -lib-$(CONFIG_MOUNT) += mount.o -lib-$(CONFIG_PIVOT_ROOT) += pivot_root.o -lib-$(CONFIG_RDATE) += rdate.o -lib-$(CONFIG_RDEV) += rdev.o -lib-$(CONFIG_READPROFILE) += readprofile.o -lib-$(CONFIG_RTCWAKE) += rtcwake.o -lib-$(CONFIG_SCRIPT) += script.o -lib-$(CONFIG_SCRIPTREPLAY) += scriptreplay.o -lib-$(CONFIG_SETARCH) += setarch.o -lib-$(CONFIG_SWAPONOFF) += swaponoff.o -lib-$(CONFIG_SWITCH_ROOT) += switch_root.o -lib-$(CONFIG_UMOUNT) += umount.o diff --git a/util-linux/Kbuild.src b/util-linux/Kbuild.src new file mode 100644 index 000000000..4fa392398 --- /dev/null +++ b/util-linux/Kbuild.src @@ -0,0 +1,45 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= +lib-$(CONFIG_ACPID) += acpid.o +lib-$(CONFIG_BLKID) += blkid.o +lib-$(CONFIG_DMESG) += dmesg.o +lib-$(CONFIG_FBSET) += fbset.o +lib-$(CONFIG_FDFLUSH) += freeramdisk.o +lib-$(CONFIG_FDFORMAT) += fdformat.o +lib-$(CONFIG_FDISK) += fdisk.o +lib-$(CONFIG_FINDFS) += findfs.o +lib-$(CONFIG_FLOCK) += flock.o +lib-$(CONFIG_FREERAMDISK) += freeramdisk.o +lib-$(CONFIG_FSCK_MINIX) += fsck_minix.o +lib-$(CONFIG_GETOPT) += getopt.o +lib-$(CONFIG_HEXDUMP) += hexdump.o +lib-$(CONFIG_HWCLOCK) += hwclock.o +lib-$(CONFIG_IPCRM) += ipcrm.o +lib-$(CONFIG_IPCS) += ipcs.o +lib-$(CONFIG_LOSETUP) += losetup.o +lib-$(CONFIG_LSPCI) += lspci.o +lib-$(CONFIG_LSUSB) += lsusb.o +lib-$(CONFIG_MDEV) += mdev.o +lib-$(CONFIG_MKFS_EXT2) += mkfs_ext2.o +lib-$(CONFIG_MKFS_MINIX) += mkfs_minix.o +lib-$(CONFIG_MKFS_REISER) += mkfs_reiser.o +lib-$(CONFIG_MKFS_VFAT) += mkfs_vfat.o +lib-$(CONFIG_MKSWAP) += mkswap.o +lib-$(CONFIG_MORE) += more.o +lib-$(CONFIG_MOUNT) += mount.o +lib-$(CONFIG_PIVOT_ROOT) += pivot_root.o +lib-$(CONFIG_RDATE) += rdate.o +lib-$(CONFIG_RDEV) += rdev.o +lib-$(CONFIG_READPROFILE) += readprofile.o +lib-$(CONFIG_RTCWAKE) += rtcwake.o +lib-$(CONFIG_SCRIPT) += script.o +lib-$(CONFIG_SCRIPTREPLAY) += scriptreplay.o +lib-$(CONFIG_SETARCH) += setarch.o +lib-$(CONFIG_SWAPONOFF) += swaponoff.o +lib-$(CONFIG_SWITCH_ROOT) += switch_root.o +lib-$(CONFIG_UMOUNT) += umount.o diff --git a/util-linux/volume_id/Kbuild b/util-linux/volume_id/Kbuild deleted file mode 100644 index 3520f2480..000000000 --- a/util-linux/volume_id/Kbuild +++ /dev/null @@ -1,43 +0,0 @@ -# Makefile for busybox -# -# Copyright (C) 1999-2005 by Erik Andersen -# -# Licensed under the GPL v2, see the file LICENSE in this tarball. - -lib-y:= - -lib-$(CONFIG_BLKID) += get_devname.o -lib-$(CONFIG_FINDFS) += get_devname.o -lib-$(CONFIG_FEATURE_MOUNT_LABEL) += get_devname.o - -lib-$(CONFIG_VOLUMEID) += volume_id.o util.o -lib-$(CONFIG_FEATURE_VOLUMEID_BTRFS) += btrfs.o -lib-$(CONFIG_FEATURE_VOLUMEID_EXT) += ext.o -lib-$(CONFIG_FEATURE_VOLUMEID_FAT) += fat.o -lib-$(CONFIG_FEATURE_VOLUMEID_HFS) += hfs.o -### lib-$(CONFIG_FEATURE_VOLUMEID_HIGHPOINTRAID) += highpoint.o -### lib-$(CONFIG_FEATURE_VOLUMEID_ISWRAID) += isw_raid.o -### lib-$(CONFIG_FEATURE_VOLUMEID_LSIRAID) += lsi_raid.o -### lib-$(CONFIG_FEATURE_VOLUMEID_VIARAID) += via_raid.o -### lib-$(CONFIG_FEATURE_VOLUMEID_SILICONRAID) += silicon_raid.o -### lib-$(CONFIG_FEATURE_VOLUMEID_NVIDIARAID) += nvidia_raid.o -### lib-$(CONFIG_FEATURE_VOLUMEID_PROMISERAID) += promise_raid.o -lib-$(CONFIG_FEATURE_VOLUMEID_ISO9660) += iso9660.o -lib-$(CONFIG_FEATURE_VOLUMEID_JFS) += jfs.o -lib-$(CONFIG_FEATURE_VOLUMEID_LINUXRAID) += linux_raid.o -lib-$(CONFIG_FEATURE_VOLUMEID_LINUXSWAP) += linux_swap.o -### lib-$(CONFIG_FEATURE_VOLUMEID_LVM) += lvm.o -### lib-$(CONFIG_FEATURE_VOLUMEID_MAC) += mac.o -### lib-$(CONFIG_FEATURE_VOLUMEID_MSDOS) += msdos.o -lib-$(CONFIG_FEATURE_VOLUMEID_NTFS) += ntfs.o -lib-$(CONFIG_FEATURE_VOLUMEID_REISERFS) += reiserfs.o -lib-$(CONFIG_FEATURE_VOLUMEID_UDF) += udf.o -### lib-$(CONFIG_FEATURE_VOLUMEID_UFS) += ufs.o -lib-$(CONFIG_FEATURE_VOLUMEID_XFS) += xfs.o -lib-$(CONFIG_FEATURE_VOLUMEID_CRAMFS) += cramfs.o -### lib-$(CONFIG_FEATURE_VOLUMEID_HPFS) += hpfs.o -lib-$(CONFIG_FEATURE_VOLUMEID_ROMFS) += romfs.o -lib-$(CONFIG_FEATURE_VOLUMEID_SYSV) += sysv.o -### lib-$(CONFIG_FEATURE_VOLUMEID_MINIX) += minix.o -lib-$(CONFIG_FEATURE_VOLUMEID_LUKS) += luks.o -lib-$(CONFIG_FEATURE_VOLUMEID_OCFS2) += ocfs2.o diff --git a/util-linux/volume_id/Kbuild.src b/util-linux/volume_id/Kbuild.src new file mode 100644 index 000000000..3520f2480 --- /dev/null +++ b/util-linux/volume_id/Kbuild.src @@ -0,0 +1,43 @@ +# Makefile for busybox +# +# Copyright (C) 1999-2005 by Erik Andersen +# +# Licensed under the GPL v2, see the file LICENSE in this tarball. + +lib-y:= + +lib-$(CONFIG_BLKID) += get_devname.o +lib-$(CONFIG_FINDFS) += get_devname.o +lib-$(CONFIG_FEATURE_MOUNT_LABEL) += get_devname.o + +lib-$(CONFIG_VOLUMEID) += volume_id.o util.o +lib-$(CONFIG_FEATURE_VOLUMEID_BTRFS) += btrfs.o +lib-$(CONFIG_FEATURE_VOLUMEID_EXT) += ext.o +lib-$(CONFIG_FEATURE_VOLUMEID_FAT) += fat.o +lib-$(CONFIG_FEATURE_VOLUMEID_HFS) += hfs.o +### lib-$(CONFIG_FEATURE_VOLUMEID_HIGHPOINTRAID) += highpoint.o +### lib-$(CONFIG_FEATURE_VOLUMEID_ISWRAID) += isw_raid.o +### lib-$(CONFIG_FEATURE_VOLUMEID_LSIRAID) += lsi_raid.o +### lib-$(CONFIG_FEATURE_VOLUMEID_VIARAID) += via_raid.o +### lib-$(CONFIG_FEATURE_VOLUMEID_SILICONRAID) += silicon_raid.o +### lib-$(CONFIG_FEATURE_VOLUMEID_NVIDIARAID) += nvidia_raid.o +### lib-$(CONFIG_FEATURE_VOLUMEID_PROMISERAID) += promise_raid.o +lib-$(CONFIG_FEATURE_VOLUMEID_ISO9660) += iso9660.o +lib-$(CONFIG_FEATURE_VOLUMEID_JFS) += jfs.o +lib-$(CONFIG_FEATURE_VOLUMEID_LINUXRAID) += linux_raid.o +lib-$(CONFIG_FEATURE_VOLUMEID_LINUXSWAP) += linux_swap.o +### lib-$(CONFIG_FEATURE_VOLUMEID_LVM) += lvm.o +### lib-$(CONFIG_FEATURE_VOLUMEID_MAC) += mac.o +### lib-$(CONFIG_FEATURE_VOLUMEID_MSDOS) += msdos.o +lib-$(CONFIG_FEATURE_VOLUMEID_NTFS) += ntfs.o +lib-$(CONFIG_FEATURE_VOLUMEID_REISERFS) += reiserfs.o +lib-$(CONFIG_FEATURE_VOLUMEID_UDF) += udf.o +### lib-$(CONFIG_FEATURE_VOLUMEID_UFS) += ufs.o +lib-$(CONFIG_FEATURE_VOLUMEID_XFS) += xfs.o +lib-$(CONFIG_FEATURE_VOLUMEID_CRAMFS) += cramfs.o +### lib-$(CONFIG_FEATURE_VOLUMEID_HPFS) += hpfs.o +lib-$(CONFIG_FEATURE_VOLUMEID_ROMFS) += romfs.o +lib-$(CONFIG_FEATURE_VOLUMEID_SYSV) += sysv.o +### lib-$(CONFIG_FEATURE_VOLUMEID_MINIX) += minix.o +lib-$(CONFIG_FEATURE_VOLUMEID_LUKS) += luks.o +lib-$(CONFIG_FEATURE_VOLUMEID_OCFS2) += ocfs2.o -- cgit v1.2.3