From df65dc89b428c8f66ee2203f4a14eb2592d89ee0 Mon Sep 17 00:00:00 2001
From: Denys Vlasenko <vda.linux@googlemail.com>
Date: Fri, 30 Mar 2018 20:49:16 +0200
Subject: examples/var_service: new example: dnsmasq service

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
---
 examples/var_service/dnsmasq/dnsmasq.conf | 76 +++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 examples/var_service/dnsmasq/dnsmasq.conf

(limited to 'examples/var_service/dnsmasq/dnsmasq.conf')

diff --git a/examples/var_service/dnsmasq/dnsmasq.conf b/examples/var_service/dnsmasq/dnsmasq.conf
new file mode 100644
index 000000000..2cfb0fe81
--- /dev/null
+++ b/examples/var_service/dnsmasq/dnsmasq.conf
@@ -0,0 +1,76 @@
+keep-in-foreground
+
+# "-" is stderr:
+log-facility=-
+
+# May also try log-queries=extra
+log-queries
+
+# No param = pidfile disabled:
+pid-file
+
+interface=lo
+listen-address=127.0.0.1
+bind-interfaces
+
+cache-size=999
+
+servers-file=/etc/dnsmasq_servers.conf
+
+# Don’t read /etc/resolv.conf and /etc/hosts:
+no-resolv
+#no-hosts
+
+# All reverse lookups for private IP ranges (ie 192.168.x.x, etc)
+# which are not found in /etc/hosts or the DHCP leases file are
+# answered with "no such domain" rather than being forwarded
+# upstream. The set of prefixes affected is the list given in
+# RFC6303.
+#bogus-priv
+
+#−T, --local-ttl=<time>
+# When replying with information from /etc/hosts or configuration
+# or the DHCP leases file dnsmasq by default sets the time-to-live
+# field to zero, meaning that the requester should not itself
+# cache the information. This is the correct thing to do in almost
+# all situations. This option allows a time-to-live (in seconds)
+# to be given for these replies. This will reduce the load on the
+# server at the expense of clients using stale data under some
+# circumstances.
+local-ttl=67
+
+#--dhcp-ttl=<time>
+# As for --local-ttl, but affects only replies with information
+# from DHCP leases. If both are given, --dhcp-ttl applies for DHCP
+# information, and --local-ttl for others. Setting this to zero
+# eliminates the effect of --local-ttl for DHCP.
+#
+#--neg-ttl=<time>
+# Negative replies from upstream servers normally contain time-to-
+# live information in SOA records which dnsmasq uses for caching.
+# If the replies from upstream servers omit this information, dns-
+# masq does not cache the reply. This option gives a default value
+# for time-to-live (in seconds) which dnsmasq uses to cache nega-
+# tive replies even in the absence of an SOA record.
+neg-ttl=67
+
+#--max-ttl=<time>
+# Set a maximum TTL value that will be handed out to clients. The
+# specified maximum TTL will be given to clients instead of the
+# true TTL value if it is lower. The true TTL value is however
+# kept in the cache to avoid flooding the upstream DNS servers.
+#
+#--max-cache-ttl=<time>
+# Set a maximum TTL value for entries in the cache.
+#
+#--min-cache-ttl=<time>
+# Extend short TTL values to the time given when caching them.
+# Note that artificially extending TTL values is in general a bad
+# idea, do not do it unless you have a good reason, and understand
+# what you are doing. Dnsmasq limits the value of this option to
+# one hour, unless recompiled.
+min-cache-ttl=67
+
+#--auth-ttl=<time>
+# Set the TTL value returned in answers from the authoritative
+# server.
-- 
cgit v1.2.3