From 72089cf6b4a77214ec4fd21d5ee5bf56958781cb Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Fri, 21 Jul 2017 09:50:55 +0200 Subject: config: deindent all help texts Those two spaces after tab have no effect, and always a nuisance when editing. Signed-off-by: Denys Vlasenko --- init/bootchartd.c | 42 +++++++++++++-------------- init/halt.c | 20 ++++++------- init/init.c | 86 +++++++++++++++++++++++++++---------------------------- 3 files changed, 74 insertions(+), 74 deletions(-) (limited to 'init') diff --git a/init/bootchartd.c b/init/bootchartd.c index d7d6f1483..b5dd17439 100644 --- a/init/bootchartd.c +++ b/init/bootchartd.c @@ -11,40 +11,40 @@ //config: bool "bootchartd (10 kb)" //config: default y //config: help -//config: bootchartd is commonly used to profile the boot process -//config: for the purpose of speeding it up. In this case, it is started -//config: by the kernel as the init process. This is configured by adding -//config: the init=/sbin/bootchartd option to the kernel command line. +//config: bootchartd is commonly used to profile the boot process +//config: for the purpose of speeding it up. In this case, it is started +//config: by the kernel as the init process. This is configured by adding +//config: the init=/sbin/bootchartd option to the kernel command line. //config: -//config: It can also be used to monitor the resource usage of a specific -//config: application or the running system in general. In this case, -//config: bootchartd is started interactively by running bootchartd start -//config: and stopped using bootchartd stop. +//config: It can also be used to monitor the resource usage of a specific +//config: application or the running system in general. In this case, +//config: bootchartd is started interactively by running bootchartd start +//config: and stopped using bootchartd stop. //config: //config:config FEATURE_BOOTCHARTD_BLOATED_HEADER //config: bool "Compatible, bloated header" //config: default y //config: depends on BOOTCHARTD //config: help -//config: Create extended header file compatible with "big" bootchartd. -//config: "Big" bootchartd is a shell script and it dumps some -//config: "convenient" info int the header, such as: -//config: title = Boot chart for `hostname` (`date`) -//config: system.uname = `uname -srvm` -//config: system.release = `cat /etc/DISTRO-release` -//config: system.cpu = `grep '^model name' /proc/cpuinfo | head -1` ($cpucount) -//config: system.kernel.options = `cat /proc/cmdline` -//config: This data is not mandatory for bootchart graph generation, -//config: and is considered bloat. Nevertheless, this option -//config: makes bootchartd applet to dump a subset of it. +//config: Create extended header file compatible with "big" bootchartd. +//config: "Big" bootchartd is a shell script and it dumps some +//config: "convenient" info int the header, such as: +//config: title = Boot chart for `hostname` (`date`) +//config: system.uname = `uname -srvm` +//config: system.release = `cat /etc/DISTRO-release` +//config: system.cpu = `grep '^model name' /proc/cpuinfo | head -1` ($cpucount) +//config: system.kernel.options = `cat /proc/cmdline` +//config: This data is not mandatory for bootchart graph generation, +//config: and is considered bloat. Nevertheless, this option +//config: makes bootchartd applet to dump a subset of it. //config: //config:config FEATURE_BOOTCHARTD_CONFIG_FILE //config: bool "Support bootchartd.conf" //config: default y //config: depends on BOOTCHARTD //config: help -//config: Enable reading and parsing of $PWD/bootchartd.conf -//config: and /etc/bootchartd.conf files. +//config: Enable reading and parsing of $PWD/bootchartd.conf +//config: and /etc/bootchartd.conf files. #include "libbb.h" #include "common_bufsiz.h" diff --git a/init/halt.c b/init/halt.c index e6eb28fc9..632c6cc56 100644 --- a/init/halt.c +++ b/init/halt.c @@ -11,39 +11,39 @@ //config: bool "halt (3.7 kb)" //config: default y //config: help -//config: Stop all processes and halt the system. +//config: Stop all processes and halt the system. //config: //config:config POWEROFF //config: bool "poweroff (3.7 kb)" //config: default y //config: help -//config: Stop all processes and power off the system. +//config: Stop all processes and power off the system. //config: //config:config REBOOT //config: bool "reboot (3.7 kb)" //config: default y //config: help -//config: Stop all processes and reboot the system. +//config: Stop all processes and reboot the system. //config: //config:config FEATURE_CALL_TELINIT //config: bool "Call telinit on shutdown and reboot" //config: default y //config: depends on (HALT || POWEROFF || REBOOT) && !INIT //config: help -//config: Call an external program (normally telinit) to facilitate -//config: a switch to a proper runlevel. +//config: Call an external program (normally telinit) to facilitate +//config: a switch to a proper runlevel. //config: -//config: This option is only available if you selected halt and friends, -//config: but did not select init. +//config: This option is only available if you selected halt and friends, +//config: but did not select init. //config: //config:config TELINIT_PATH //config: string "Path to telinit executable" //config: default "/sbin/telinit" //config: depends on FEATURE_CALL_TELINIT //config: help -//config: When busybox halt and friends have to call external telinit -//config: to facilitate proper shutdown, this path is to be used when -//config: locating telinit executable. +//config: When busybox halt and friends have to call external telinit +//config: to facilitate proper shutdown, this path is to be used when +//config: locating telinit executable. //applet:IF_HALT(APPLET(halt, BB_DIR_SBIN, BB_SUID_DROP)) // APPLET_ODDNAME:name main location suid_type help diff --git a/init/init.c b/init/init.c index 3427e1cc8..ab137a981 100644 --- a/init/init.c +++ b/init/init.c @@ -14,34 +14,34 @@ //config: default y //config: select FEATURE_SYSLOG //config: help -//config: init is the first program run when the system boots. +//config: init is the first program run when the system boots. //config: //config:config LINUXRC //config: bool "linuxrc: support running init from initrd (not initramfs)" //config: default y //config: select FEATURE_SYSLOG //config: help -//config: Legacy support for running init under the old-style initrd. Allows -//config: the name linuxrc to act as init, and it doesn't assume init is PID 1. +//config: Legacy support for running init under the old-style initrd. Allows +//config: the name linuxrc to act as init, and it doesn't assume init is PID 1. //config: -//config: This does not apply to initramfs, which runs /init as PID 1 and -//config: requires no special support. +//config: This does not apply to initramfs, which runs /init as PID 1 and +//config: requires no special support. //config: //config:config FEATURE_USE_INITTAB //config: bool "Support reading an inittab file" //config: default y //config: depends on INIT || LINUXRC //config: help -//config: Allow init to read an inittab file when the system boot. +//config: Allow init to read an inittab file when the system boot. //config: //config:config FEATURE_KILL_REMOVED //config: bool "Support killing processes that have been removed from inittab" //config: default n //config: depends on FEATURE_USE_INITTAB //config: help -//config: When respawn entries are removed from inittab and a SIGHUP is -//config: sent to init, this option will make init kill the processes -//config: that have been removed. +//config: When respawn entries are removed from inittab and a SIGHUP is +//config: sent to init, this option will make init kill the processes +//config: that have been removed. //config: //config:config FEATURE_KILL_DELAY //config: int "How long to wait between TERM and KILL (0 - send TERM only)" if FEATURE_KILL_REMOVED @@ -49,34 +49,34 @@ //config: default 0 //config: depends on FEATURE_KILL_REMOVED //config: help -//config: With nonzero setting, init sends TERM, forks, child waits N -//config: seconds, sends KILL and exits. Setting it too high is unwise -//config: (child will hang around for too long and could actually kill -//config: the wrong process!) +//config: With nonzero setting, init sends TERM, forks, child waits N +//config: seconds, sends KILL and exits. Setting it too high is unwise +//config: (child will hang around for too long and could actually kill +//config: the wrong process!) //config: //config:config FEATURE_INIT_SCTTY //config: bool "Run commands with leading dash with controlling tty" //config: default y //config: depends on INIT || LINUXRC //config: help -//config: If this option is enabled, init will try to give a controlling -//config: tty to any command which has leading hyphen (often it's "-/bin/sh"). -//config: More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)". -//config: If device attached to STDIN_FILENO can be a ctty but is not yet -//config: a ctty for other session, it will become this process' ctty. -//config: This is not the traditional init behavour, but is often what you want -//config: in an embedded system where the console is only accessed during -//config: development or for maintenance. -//config: NB: using cttyhack applet may work better. +//config: If this option is enabled, init will try to give a controlling +//config: tty to any command which has leading hyphen (often it's "-/bin/sh"). +//config: More precisely, init will do "ioctl(STDIN_FILENO, TIOCSCTTY, 0)". +//config: If device attached to STDIN_FILENO can be a ctty but is not yet +//config: a ctty for other session, it will become this process' ctty. +//config: This is not the traditional init behavour, but is often what you want +//config: in an embedded system where the console is only accessed during +//config: development or for maintenance. +//config: NB: using cttyhack applet may work better. //config: //config:config FEATURE_INIT_SYSLOG //config: bool "Enable init to write to syslog" //config: default y //config: depends on INIT || LINUXRC //config: help -//config: If selected, some init messages are sent to syslog. -//config: Otherwise, they are sent to VT #5 if linux virtual tty is detected -//config: (if not, no separate logging is done). +//config: If selected, some init messages are sent to syslog. +//config: Otherwise, they are sent to VT #5 if linux virtual tty is detected +//config: (if not, no separate logging is done). //config: //config:config FEATURE_INIT_QUIET //config: bool "Be quiet on boot (no 'init started:' message)" @@ -88,37 +88,37 @@ //config: default n # not Y because this is a debug option //config: depends on INIT || LINUXRC //config: help -//config: If this option is enabled and the file /.init_enable_core -//config: exists, then init will call setrlimit() to allow unlimited -//config: core file sizes. If this option is disabled, processes -//config: will not generate any core files. +//config: If this option is enabled and the file /.init_enable_core +//config: exists, then init will call setrlimit() to allow unlimited +//config: core file sizes. If this option is disabled, processes +//config: will not generate any core files. //config: //config:config INIT_TERMINAL_TYPE //config: string "Initial terminal type" //config: default "linux" //config: depends on INIT || LINUXRC //config: help -//config: This is the initial value set by init for the TERM environment -//config: variable. This variable is used by programs which make use of -//config: extended terminal capabilities. +//config: This is the initial value set by init for the TERM environment +//config: variable. This variable is used by programs which make use of +//config: extended terminal capabilities. //config: -//config: Note that on Linux, init attempts to detect serial terminal and -//config: sets TERM to "vt102" if one is found. +//config: Note that on Linux, init attempts to detect serial terminal and +//config: sets TERM to "vt102" if one is found. //config: //config:config FEATURE_INIT_MODIFY_CMDLINE //config: bool "Clear init's command line" //config: default y //config: depends on INIT || LINUXRC //config: help -//config: When launched as PID 1 and after parsing its arguments, init -//config: wipes all the arguments but argv[0] and rewrites argv[0] to -//config: contain only "init", so that its command line appears solely as -//config: "init" in tools such as ps. -//config: If this option is set to Y, init will keep its original behavior, -//config: otherwise, all the arguments including argv[0] will be preserved, -//config: be they parsed or ignored by init. -//config: The original command-line used to launch init can then be -//config: retrieved in /proc/1/cmdline on Linux, for example. +//config: When launched as PID 1 and after parsing its arguments, init +//config: wipes all the arguments but argv[0] and rewrites argv[0] to +//config: contain only "init", so that its command line appears solely as +//config: "init" in tools such as ps. +//config: If this option is set to Y, init will keep its original behavior, +//config: otherwise, all the arguments including argv[0] will be preserved, +//config: be they parsed or ignored by init. +//config: The original command-line used to launch init can then be +//config: retrieved in /proc/1/cmdline on Linux, for example. //applet:IF_INIT(APPLET(init, BB_DIR_SBIN, BB_SUID_DROP)) //applet:IF_LINUXRC(APPLET_ODDNAME(linuxrc, init, BB_DIR_ROOT, BB_SUID_DROP, linuxrc)) -- cgit v1.2.3