From 5cf7c2df668d25c41a05670edd08558226f0bfdf Mon Sep 17 00:00:00 2001 From: Rob Landley Date: Tue, 21 Feb 2006 06:44:43 +0000 Subject: Patch from Devin Bayer to split up hash_fd.c into md5.c and sha1.c. (I tweaked md5_sha1_sum.c to convert some #ifdef CONFIG to if(ENABLE).) --- libbb/hash_fd.c | 851 -------------------------------------------------------- 1 file changed, 851 deletions(-) delete mode 100644 libbb/hash_fd.c (limited to 'libbb/hash_fd.c') diff --git a/libbb/hash_fd.c b/libbb/hash_fd.c deleted file mode 100644 index 39825b378..000000000 --- a/libbb/hash_fd.c +++ /dev/null @@ -1,851 +0,0 @@ -/* - * Based on shasum from http://www.netsw.org/crypto/hash/ - * Majorly hacked up to use Dr Brian Gladman's sha1 code - * - * Copyright (C) 2003 Glenn L. McGrath - * Copyright (C) 2003 Erik Andersen - * - * Licensed under the GPL v2 or later, see the file LICENSE in this tarball. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "busybox.h" - - -#ifdef CONFIG_SHA1SUM -/* - --------------------------------------------------------------------------- - Begin Dr. Gladman's sha1 code - --------------------------------------------------------------------------- -*/ - -/* - --------------------------------------------------------------------------- - Copyright (c) 2002, Dr Brian Gladman , Worcester, UK. - All rights reserved. - - LICENSE TERMS - - The free distribution and use of this software in both source and binary - form is allowed (with or without changes) provided that: - - 1. distributions of this source code include the above copyright - notice, this list of conditions and the following disclaimer; - - 2. distributions in binary form include the above copyright - notice, this list of conditions and the following disclaimer - in the documentation and/or other associated materials; - - 3. the copyright holder's name is not used to endorse products - built using this software without specific written permission. - - ALTERNATIVELY, provided that this notice is retained in full, this product - may be distributed under the terms of the GNU General Public License (GPL), - in which case the provisions of the GPL apply INSTEAD OF those given above. - - DISCLAIMER - - This software is provided 'as is' with no explicit or implied warranties - in respect of its properties, including, but not limited to, correctness - and/or fitness for purpose. - --------------------------------------------------------------------------- - Issue Date: 10/11/2002 - - This is a byte oriented version of SHA1 that operates on arrays of bytes - stored in memory. It runs at 22 cycles per byte on a Pentium P4 processor -*/ - -# define SHA1_BLOCK_SIZE 64 -# define SHA1_DIGEST_SIZE 20 -# define SHA1_HASH_SIZE SHA1_DIGEST_SIZE -# define SHA2_GOOD 0 -# define SHA2_BAD 1 - -# define rotl32(x,n) (((x) << n) | ((x) >> (32 - n))) - -# if __BYTE_ORDER == __BIG_ENDIAN -# define swap_b32(x) (x) -# elif defined(bswap_32) -# define swap_b32(x) bswap_32(x) -# else -# define swap_b32(x) ((rotl32((x), 8) & 0x00ff00ff) | (rotl32((x), 24) & 0xff00ff00)) -# endif /* __BYTE_ORDER */ - -# define SHA1_MASK (SHA1_BLOCK_SIZE - 1) - -/* reverse byte order in 32-bit words */ -#define ch(x,y,z) ((z) ^ ((x) & ((y) ^ (z)))) -#define parity(x,y,z) ((x) ^ (y) ^ (z)) -#define maj(x,y,z) (((x) & (y)) | ((z) & ((x) | (y)))) - -/* A normal version as set out in the FIPS. This version uses */ -/* partial loop unrolling and is optimised for the Pentium 4 */ -# define rnd(f,k) \ - t = a; a = rotl32(a,5) + f(b,c,d) + e + k + w[i]; \ - e = d; d = c; c = rotl32(b, 30); b = t - -/* type to hold the SHA1 context */ -struct sha1_ctx_t { - uint32_t count[2]; - uint32_t hash[5]; - uint32_t wbuf[16]; -}; - -static void sha1_compile(struct sha1_ctx_t *ctx) -{ - uint32_t w[80], i, a, b, c, d, e, t; - - /* note that words are compiled from the buffer into 32-bit */ - /* words in big-endian order so an order reversal is needed */ - /* here on little endian machines */ - for (i = 0; i < SHA1_BLOCK_SIZE / 4; ++i) - w[i] = swap_b32(ctx->wbuf[i]); - - for (i = SHA1_BLOCK_SIZE / 4; i < 80; ++i) - w[i] = rotl32(w[i - 3] ^ w[i - 8] ^ w[i - 14] ^ w[i - 16], 1); - - a = ctx->hash[0]; - b = ctx->hash[1]; - c = ctx->hash[2]; - d = ctx->hash[3]; - e = ctx->hash[4]; - - for (i = 0; i < 20; ++i) { - rnd(ch, 0x5a827999); - } - - for (i = 20; i < 40; ++i) { - rnd(parity, 0x6ed9eba1); - } - - for (i = 40; i < 60; ++i) { - rnd(maj, 0x8f1bbcdc); - } - - for (i = 60; i < 80; ++i) { - rnd(parity, 0xca62c1d6); - } - - ctx->hash[0] += a; - ctx->hash[1] += b; - ctx->hash[2] += c; - ctx->hash[3] += d; - ctx->hash[4] += e; -} - -static void sha1_begin(struct sha1_ctx_t *ctx) -{ - ctx->count[0] = ctx->count[1] = 0; - ctx->hash[0] = 0x67452301; - ctx->hash[1] = 0xefcdab89; - ctx->hash[2] = 0x98badcfe; - ctx->hash[3] = 0x10325476; - ctx->hash[4] = 0xc3d2e1f0; -} - -/* SHA1 hash data in an array of bytes into hash buffer and call the */ -/* hash_compile function as required. */ -static void sha1_hash(const void *data, size_t len, void *ctx_v) -{ - struct sha1_ctx_t *ctx = (struct sha1_ctx_t *) ctx_v; - uint32_t pos = (uint32_t) (ctx->count[0] & SHA1_MASK); - uint32_t freeb = SHA1_BLOCK_SIZE - pos; - const unsigned char *sp = data; - - if ((ctx->count[0] += len) < len) - ++(ctx->count[1]); - - while (len >= freeb) { /* tranfer whole blocks while possible */ - memcpy(((unsigned char *) ctx->wbuf) + pos, sp, freeb); - sp += freeb; - len -= freeb; - freeb = SHA1_BLOCK_SIZE; - pos = 0; - sha1_compile(ctx); - } - - memcpy(((unsigned char *) ctx->wbuf) + pos, sp, len); -} - -/* SHA1 Final padding and digest calculation */ -# if __BYTE_ORDER == __LITTLE_ENDIAN -static uint32_t mask[4] = { 0x00000000, 0x000000ff, 0x0000ffff, 0x00ffffff }; -static uint32_t bits[4] = { 0x00000080, 0x00008000, 0x00800000, 0x80000000 }; -# else -static uint32_t mask[4] = { 0x00000000, 0xff000000, 0xffff0000, 0xffffff00 }; -static uint32_t bits[4] = { 0x80000000, 0x00800000, 0x00008000, 0x00000080 }; -# endif /* __BYTE_ORDER */ - -static void sha1_end(unsigned char hval[], struct sha1_ctx_t *ctx) -{ - uint32_t i, cnt = (uint32_t) (ctx->count[0] & SHA1_MASK); - - /* mask out the rest of any partial 32-bit word and then set */ - /* the next byte to 0x80. On big-endian machines any bytes in */ - /* the buffer will be at the top end of 32 bit words, on little */ - /* endian machines they will be at the bottom. Hence the AND */ - /* and OR masks above are reversed for little endian systems */ - ctx->wbuf[cnt >> 2] = - (ctx->wbuf[cnt >> 2] & mask[cnt & 3]) | bits[cnt & 3]; - - /* we need 9 or more empty positions, one for the padding byte */ - /* (above) and eight for the length count. If there is not */ - /* enough space pad and empty the buffer */ - if (cnt > SHA1_BLOCK_SIZE - 9) { - if (cnt < 60) - ctx->wbuf[15] = 0; - sha1_compile(ctx); - cnt = 0; - } else /* compute a word index for the empty buffer positions */ - cnt = (cnt >> 2) + 1; - - while (cnt < 14) /* and zero pad all but last two positions */ - ctx->wbuf[cnt++] = 0; - - /* assemble the eight byte counter in the buffer in big-endian */ - /* format */ - - ctx->wbuf[14] = swap_b32((ctx->count[1] << 3) | (ctx->count[0] >> 29)); - ctx->wbuf[15] = swap_b32(ctx->count[0] << 3); - - sha1_compile(ctx); - - /* extract the hash value as bytes in case the hash buffer is */ - /* misaligned for 32-bit words */ - - for (i = 0; i < SHA1_DIGEST_SIZE; ++i) - hval[i] = (unsigned char) (ctx->hash[i >> 2] >> 8 * (~i & 3)); -} - -/* - --------------------------------------------------------------------------- - End of Dr. Gladman's sha1 code - --------------------------------------------------------------------------- -*/ -#endif /* CONFIG_SHA1 */ - - - - - -#ifdef CONFIG_MD5SUM -/* - * md5sum.c - Compute MD5 checksum of files or strings according to the - * definition of MD5 in RFC 1321 from April 1992. - * - * Copyright (C) 1995-1999 Free Software Foundation, Inc. - * Written by Ulrich Drepper , 1995. - * - * - * June 29, 2001 Manuel Novoa III - * - * Added MD5SUM_SIZE_VS_SPEED configuration option. - * - * Current valid values, with data from my system for comparison, are: - * (using uClibc and running on linux-2.4.4.tar.bz2) - * user times (sec) text size (386) - * 0 (fastest) 1.1 6144 - * 1 1.4 5392 - * 2 3.0 5088 - * 3 (smallest) 5.1 4912 - */ - -# if CONFIG_MD5SUM_SIZE_VS_SPEED < 0 || CONFIG_MD5SUM_SIZE_VS_SPEED > 3 -# define MD5SUM_SIZE_VS_SPEED 2 -# else -# define MD5SUM_SIZE_VS_SPEED CONFIG_MD5SUM_SIZE_VS_SPEED -# endif - -/* Handle endian-ness */ -# if __BYTE_ORDER == __LITTLE_ENDIAN -# define SWAP(n) (n) -# elif defined(bswap_32) -# define SWAP(n) bswap_32(n) -# else -# define SWAP(n) ((n << 24) | ((n&65280)<<8) | ((n&16711680)>>8) | (n>>24)) -# endif - -# if MD5SUM_SIZE_VS_SPEED == 0 -/* This array contains the bytes used to pad the buffer to the next - 64-byte boundary. (RFC 1321, 3.1: Step 1) */ -static const unsigned char fillbuf[64] = { 0x80, 0 /* , 0, 0, ... */ }; -# endif /* MD5SUM_SIZE_VS_SPEED == 0 */ - -/* Structure to save state of computation between the single steps. */ -struct md5_ctx_t { - uint32_t A; - uint32_t B; - uint32_t C; - uint32_t D; - uint32_t total[2]; - uint32_t buflen; - char buffer[128]; -}; - -/* Initialize structure containing state of computation. - * (RFC 1321, 3.3: Step 3) - */ -static void md5_begin(struct md5_ctx_t *ctx) -{ - ctx->A = 0x67452301; - ctx->B = 0xefcdab89; - ctx->C = 0x98badcfe; - ctx->D = 0x10325476; - - ctx->total[0] = ctx->total[1] = 0; - ctx->buflen = 0; -} - -/* These are the four functions used in the four steps of the MD5 algorithm - * and defined in the RFC 1321. The first function is a little bit optimized - * (as found in Colin Plumbs public domain implementation). - * #define FF(b, c, d) ((b & c) | (~b & d)) - */ -# define FF(b, c, d) (d ^ (b & (c ^ d))) -# define FG(b, c, d) FF (d, b, c) -# define FH(b, c, d) (b ^ c ^ d) -# define FI(b, c, d) (c ^ (b | ~d)) - -/* Starting with the result of former calls of this function (or the - * initialization function update the context for the next LEN bytes - * starting at BUFFER. - * It is necessary that LEN is a multiple of 64!!! - */ -static void md5_hash_block(const void *buffer, size_t len, struct md5_ctx_t *ctx) -{ - uint32_t correct_words[16]; - const uint32_t *words = buffer; - size_t nwords = len / sizeof(uint32_t); - const uint32_t *endp = words + nwords; - -# if MD5SUM_SIZE_VS_SPEED > 0 - static const uint32_t C_array[] = { - /* round 1 */ - 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee, - 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501, - 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be, - 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821, - /* round 2 */ - 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa, - 0xd62f105d, 0x2441453, 0xd8a1e681, 0xe7d3fbc8, - 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed, - 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a, - /* round 3 */ - 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c, - 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70, - 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05, - 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665, - /* round 4 */ - 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039, - 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1, - 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1, - 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391 - }; - - static const char P_array[] = { -# if MD5SUM_SIZE_VS_SPEED > 1 - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, /* 1 */ -# endif /* MD5SUM_SIZE_VS_SPEED > 1 */ - 1, 6, 11, 0, 5, 10, 15, 4, 9, 14, 3, 8, 13, 2, 7, 12, /* 2 */ - 5, 8, 11, 14, 1, 4, 7, 10, 13, 0, 3, 6, 9, 12, 15, 2, /* 3 */ - 0, 7, 14, 5, 12, 3, 10, 1, 8, 15, 6, 13, 4, 11, 2, 9 /* 4 */ - }; - -# if MD5SUM_SIZE_VS_SPEED > 1 - static const char S_array[] = { - 7, 12, 17, 22, - 5, 9, 14, 20, - 4, 11, 16, 23, - 6, 10, 15, 21 - }; -# endif /* MD5SUM_SIZE_VS_SPEED > 1 */ -# endif - - uint32_t A = ctx->A; - uint32_t B = ctx->B; - uint32_t C = ctx->C; - uint32_t D = ctx->D; - - /* First increment the byte count. RFC 1321 specifies the possible - length of the file up to 2^64 bits. Here we only compute the - number of bytes. Do a double word increment. */ - ctx->total[0] += len; - if (ctx->total[0] < len) - ++ctx->total[1]; - - /* Process all bytes in the buffer with 64 bytes in each round of - the loop. */ - while (words < endp) { - uint32_t *cwp = correct_words; - uint32_t A_save = A; - uint32_t B_save = B; - uint32_t C_save = C; - uint32_t D_save = D; - -# if MD5SUM_SIZE_VS_SPEED > 1 -# define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s))) - - const uint32_t *pc; - const char *pp; - const char *ps; - int i; - uint32_t temp; - - for (i = 0; i < 16; i++) { - cwp[i] = SWAP(words[i]); - } - words += 16; - -# if MD5SUM_SIZE_VS_SPEED > 2 - pc = C_array; - pp = P_array; - ps = S_array - 4; - - for (i = 0; i < 64; i++) { - if ((i & 0x0f) == 0) - ps += 4; - temp = A; - switch (i >> 4) { - case 0: - temp += FF(B, C, D); - break; - case 1: - temp += FG(B, C, D); - break; - case 2: - temp += FH(B, C, D); - break; - case 3: - temp += FI(B, C, D); - } - temp += cwp[(int) (*pp++)] + *pc++; - CYCLIC(temp, ps[i & 3]); - temp += B; - A = D; - D = C; - C = B; - B = temp; - } -# else - pc = C_array; - pp = P_array; - ps = S_array; - - for (i = 0; i < 16; i++) { - temp = A + FF(B, C, D) + cwp[(int) (*pp++)] + *pc++; - CYCLIC(temp, ps[i & 3]); - temp += B; - A = D; - D = C; - C = B; - B = temp; - } - - ps += 4; - for (i = 0; i < 16; i++) { - temp = A + FG(B, C, D) + cwp[(int) (*pp++)] + *pc++; - CYCLIC(temp, ps[i & 3]); - temp += B; - A = D; - D = C; - C = B; - B = temp; - } - ps += 4; - for (i = 0; i < 16; i++) { - temp = A + FH(B, C, D) + cwp[(int) (*pp++)] + *pc++; - CYCLIC(temp, ps[i & 3]); - temp += B; - A = D; - D = C; - C = B; - B = temp; - } - ps += 4; - for (i = 0; i < 16; i++) { - temp = A + FI(B, C, D) + cwp[(int) (*pp++)] + *pc++; - CYCLIC(temp, ps[i & 3]); - temp += B; - A = D; - D = C; - C = B; - B = temp; - } - -# endif /* MD5SUM_SIZE_VS_SPEED > 2 */ -# else - /* First round: using the given function, the context and a constant - the next context is computed. Because the algorithms processing - unit is a 32-bit word and it is determined to work on words in - little endian byte order we perhaps have to change the byte order - before the computation. To reduce the work for the next steps - we store the swapped words in the array CORRECT_WORDS. */ - -# define OP(a, b, c, d, s, T) \ - do \ - { \ - a += FF (b, c, d) + (*cwp++ = SWAP (*words)) + T; \ - ++words; \ - CYCLIC (a, s); \ - a += b; \ - } \ - while (0) - - /* It is unfortunate that C does not provide an operator for - cyclic rotation. Hope the C compiler is smart enough. */ - /* gcc 2.95.4 seems to be --aaronl */ -# define CYCLIC(w, s) (w = (w << s) | (w >> (32 - s))) - - /* Before we start, one word to the strange constants. - They are defined in RFC 1321 as - - T[i] = (int) (4294967296.0 * fabs (sin (i))), i=1..64 - */ - -# if MD5SUM_SIZE_VS_SPEED == 1 - const uint32_t *pc; - const char *pp; - int i; -# endif /* MD5SUM_SIZE_VS_SPEED */ - - /* Round 1. */ -# if MD5SUM_SIZE_VS_SPEED == 1 - pc = C_array; - for (i = 0; i < 4; i++) { - OP(A, B, C, D, 7, *pc++); - OP(D, A, B, C, 12, *pc++); - OP(C, D, A, B, 17, *pc++); - OP(B, C, D, A, 22, *pc++); - } -# else - OP(A, B, C, D, 7, 0xd76aa478); - OP(D, A, B, C, 12, 0xe8c7b756); - OP(C, D, A, B, 17, 0x242070db); - OP(B, C, D, A, 22, 0xc1bdceee); - OP(A, B, C, D, 7, 0xf57c0faf); - OP(D, A, B, C, 12, 0x4787c62a); - OP(C, D, A, B, 17, 0xa8304613); - OP(B, C, D, A, 22, 0xfd469501); - OP(A, B, C, D, 7, 0x698098d8); - OP(D, A, B, C, 12, 0x8b44f7af); - OP(C, D, A, B, 17, 0xffff5bb1); - OP(B, C, D, A, 22, 0x895cd7be); - OP(A, B, C, D, 7, 0x6b901122); - OP(D, A, B, C, 12, 0xfd987193); - OP(C, D, A, B, 17, 0xa679438e); - OP(B, C, D, A, 22, 0x49b40821); -# endif /* MD5SUM_SIZE_VS_SPEED == 1 */ - - /* For the second to fourth round we have the possibly swapped words - in CORRECT_WORDS. Redefine the macro to take an additional first - argument specifying the function to use. */ -# undef OP -# define OP(f, a, b, c, d, k, s, T) \ - do \ - { \ - a += f (b, c, d) + correct_words[k] + T; \ - CYCLIC (a, s); \ - a += b; \ - } \ - while (0) - - /* Round 2. */ -# if MD5SUM_SIZE_VS_SPEED == 1 - pp = P_array; - for (i = 0; i < 4; i++) { - OP(FG, A, B, C, D, (int) (*pp++), 5, *pc++); - OP(FG, D, A, B, C, (int) (*pp++), 9, *pc++); - OP(FG, C, D, A, B, (int) (*pp++), 14, *pc++); - OP(FG, B, C, D, A, (int) (*pp++), 20, *pc++); - } -# else - OP(FG, A, B, C, D, 1, 5, 0xf61e2562); - OP(FG, D, A, B, C, 6, 9, 0xc040b340); - OP(FG, C, D, A, B, 11, 14, 0x265e5a51); - OP(FG, B, C, D, A, 0, 20, 0xe9b6c7aa); - OP(FG, A, B, C, D, 5, 5, 0xd62f105d); - OP(FG, D, A, B, C, 10, 9, 0x02441453); - OP(FG, C, D, A, B, 15, 14, 0xd8a1e681); - OP(FG, B, C, D, A, 4, 20, 0xe7d3fbc8); - OP(FG, A, B, C, D, 9, 5, 0x21e1cde6); - OP(FG, D, A, B, C, 14, 9, 0xc33707d6); - OP(FG, C, D, A, B, 3, 14, 0xf4d50d87); - OP(FG, B, C, D, A, 8, 20, 0x455a14ed); - OP(FG, A, B, C, D, 13, 5, 0xa9e3e905); - OP(FG, D, A, B, C, 2, 9, 0xfcefa3f8); - OP(FG, C, D, A, B, 7, 14, 0x676f02d9); - OP(FG, B, C, D, A, 12, 20, 0x8d2a4c8a); -# endif /* MD5SUM_SIZE_VS_SPEED == 1 */ - - /* Round 3. */ -# if MD5SUM_SIZE_VS_SPEED == 1 - for (i = 0; i < 4; i++) { - OP(FH, A, B, C, D, (int) (*pp++), 4, *pc++); - OP(FH, D, A, B, C, (int) (*pp++), 11, *pc++); - OP(FH, C, D, A, B, (int) (*pp++), 16, *pc++); - OP(FH, B, C, D, A, (int) (*pp++), 23, *pc++); - } -# else - OP(FH, A, B, C, D, 5, 4, 0xfffa3942); - OP(FH, D, A, B, C, 8, 11, 0x8771f681); - OP(FH, C, D, A, B, 11, 16, 0x6d9d6122); - OP(FH, B, C, D, A, 14, 23, 0xfde5380c); - OP(FH, A, B, C, D, 1, 4, 0xa4beea44); - OP(FH, D, A, B, C, 4, 11, 0x4bdecfa9); - OP(FH, C, D, A, B, 7, 16, 0xf6bb4b60); - OP(FH, B, C, D, A, 10, 23, 0xbebfbc70); - OP(FH, A, B, C, D, 13, 4, 0x289b7ec6); - OP(FH, D, A, B, C, 0, 11, 0xeaa127fa); - OP(FH, C, D, A, B, 3, 16, 0xd4ef3085); - OP(FH, B, C, D, A, 6, 23, 0x04881d05); - OP(FH, A, B, C, D, 9, 4, 0xd9d4d039); - OP(FH, D, A, B, C, 12, 11, 0xe6db99e5); - OP(FH, C, D, A, B, 15, 16, 0x1fa27cf8); - OP(FH, B, C, D, A, 2, 23, 0xc4ac5665); -# endif /* MD5SUM_SIZE_VS_SPEED == 1 */ - - /* Round 4. */ -# if MD5SUM_SIZE_VS_SPEED == 1 - for (i = 0; i < 4; i++) { - OP(FI, A, B, C, D, (int) (*pp++), 6, *pc++); - OP(FI, D, A, B, C, (int) (*pp++), 10, *pc++); - OP(FI, C, D, A, B, (int) (*pp++), 15, *pc++); - OP(FI, B, C, D, A, (int) (*pp++), 21, *pc++); - } -# else - OP(FI, A, B, C, D, 0, 6, 0xf4292244); - OP(FI, D, A, B, C, 7, 10, 0x432aff97); - OP(FI, C, D, A, B, 14, 15, 0xab9423a7); - OP(FI, B, C, D, A, 5, 21, 0xfc93a039); - OP(FI, A, B, C, D, 12, 6, 0x655b59c3); - OP(FI, D, A, B, C, 3, 10, 0x8f0ccc92); - OP(FI, C, D, A, B, 10, 15, 0xffeff47d); - OP(FI, B, C, D, A, 1, 21, 0x85845dd1); - OP(FI, A, B, C, D, 8, 6, 0x6fa87e4f); - OP(FI, D, A, B, C, 15, 10, 0xfe2ce6e0); - OP(FI, C, D, A, B, 6, 15, 0xa3014314); - OP(FI, B, C, D, A, 13, 21, 0x4e0811a1); - OP(FI, A, B, C, D, 4, 6, 0xf7537e82); - OP(FI, D, A, B, C, 11, 10, 0xbd3af235); - OP(FI, C, D, A, B, 2, 15, 0x2ad7d2bb); - OP(FI, B, C, D, A, 9, 21, 0xeb86d391); -# endif /* MD5SUM_SIZE_VS_SPEED == 1 */ -# endif /* MD5SUM_SIZE_VS_SPEED > 1 */ - - /* Add the starting values of the context. */ - A += A_save; - B += B_save; - C += C_save; - D += D_save; - } - - /* Put checksum in context given as argument. */ - ctx->A = A; - ctx->B = B; - ctx->C = C; - ctx->D = D; -} - -/* Starting with the result of former calls of this function (or the - * initialization function update the context for the next LEN bytes - * starting at BUFFER. - * It is NOT required that LEN is a multiple of 64. - */ - -static void md5_hash_bytes(const void *buffer, size_t len, struct md5_ctx_t *ctx) -{ - /* When we already have some bits in our internal buffer concatenate - both inputs first. */ - if (ctx->buflen != 0) { - size_t left_over = ctx->buflen; - size_t add = 128 - left_over > len ? len : 128 - left_over; - - memcpy(&ctx->buffer[left_over], buffer, add); - ctx->buflen += add; - - if (left_over + add > 64) { - md5_hash_block(ctx->buffer, (left_over + add) & ~63, ctx); - /* The regions in the following copy operation cannot overlap. */ - memcpy(ctx->buffer, &ctx->buffer[(left_over + add) & ~63], - (left_over + add) & 63); - ctx->buflen = (left_over + add) & 63; - } - - buffer = (const char *) buffer + add; - len -= add; - } - - /* Process available complete blocks. */ - if (len > 64) { - md5_hash_block(buffer, len & ~63, ctx); - buffer = (const char *) buffer + (len & ~63); - len &= 63; - } - - /* Move remaining bytes in internal buffer. */ - if (len > 0) { - memcpy(ctx->buffer, buffer, len); - ctx->buflen = len; - } -} - -static void md5_hash(const void *buffer, size_t length, void *md5_ctx) -{ - if (length % 64 == 0) { - md5_hash_block(buffer, length, md5_ctx); - } else { - md5_hash_bytes(buffer, length, md5_ctx); - } -} - -/* Process the remaining bytes in the buffer and put result from CTX - * in first 16 bytes following RESBUF. The result is always in little - * endian byte order, so that a byte-wise output yields to the wanted - * ASCII representation of the message digest. - * - * IMPORTANT: On some systems it is required that RESBUF is correctly - * aligned for a 32 bits value. - */ -static void *md5_end(void *resbuf, struct md5_ctx_t *ctx) -{ - /* Take yet unprocessed bytes into account. */ - uint32_t bytes = ctx->buflen; - size_t pad; - - /* Now count remaining bytes. */ - ctx->total[0] += bytes; - if (ctx->total[0] < bytes) - ++ctx->total[1]; - - pad = bytes >= 56 ? 64 + 56 - bytes : 56 - bytes; -# if MD5SUM_SIZE_VS_SPEED > 0 - memset(&ctx->buffer[bytes], 0, pad); - ctx->buffer[bytes] = 0x80; -# else - memcpy(&ctx->buffer[bytes], fillbuf, pad); -# endif /* MD5SUM_SIZE_VS_SPEED > 0 */ - - /* Put the 64-bit file length in *bits* at the end of the buffer. */ - *(uint32_t *) & ctx->buffer[bytes + pad] = SWAP(ctx->total[0] << 3); - *(uint32_t *) & ctx->buffer[bytes + pad + 4] = - SWAP(((ctx->total[1] << 3) | (ctx->total[0] >> 29))); - - /* Process last bytes. */ - md5_hash_block(ctx->buffer, bytes + pad + 8, ctx); - - /* Put result from CTX in first 16 bytes following RESBUF. The result is - * always in little endian byte order, so that a byte-wise output yields - * to the wanted ASCII representation of the message digest. - * - * IMPORTANT: On some systems it is required that RESBUF is correctly - * aligned for a 32 bits value. - */ - ((uint32_t *) resbuf)[0] = SWAP(ctx->A); - ((uint32_t *) resbuf)[1] = SWAP(ctx->B); - ((uint32_t *) resbuf)[2] = SWAP(ctx->C); - ((uint32_t *) resbuf)[3] = SWAP(ctx->D); - - return resbuf; -} -#endif /* CONFIG_MD5SUM */ - - - - -extern int hash_fd(int src_fd, const size_t size, const uint8_t hash_algo, - uint8_t * hashval) -{ - int result = EXIT_SUCCESS; -// size_t hashed_count = 0; - size_t blocksize = 0; - size_t remaining = size; - unsigned char *buffer = NULL; - void (*hash_fn_ptr)(const void *, size_t, void *) = NULL; - void *cx = NULL; - -#ifdef CONFIG_SHA1SUM - struct sha1_ctx_t sha1_cx; -#endif -#ifdef CONFIG_MD5SUM - struct md5_ctx_t md5_cx; -#endif - - -#ifdef CONFIG_SHA1SUM - if (hash_algo == HASH_SHA1) { - /* Ensure that BLOCKSIZE is a multiple of 64. */ - blocksize = 65536; - buffer = xmalloc(blocksize); - hash_fn_ptr = sha1_hash; - cx = &sha1_cx; - } -#endif -#ifdef CONFIG_MD5SUM - if (hash_algo == HASH_MD5) { - blocksize = 4096; - buffer = xmalloc(blocksize + 72); - hash_fn_ptr = md5_hash; - cx = &md5_cx; - } -#endif - - /* Initialize the computation context. */ -#ifdef CONFIG_SHA1SUM - if (hash_algo == HASH_SHA1) { - sha1_begin(&sha1_cx); - } -#endif -#ifdef CONFIG_MD5SUM - if (hash_algo == HASH_MD5) { - md5_begin(&md5_cx); - } -#endif - /* Iterate over full file contents. */ - while ((remaining == (size_t) -1) || (remaining > 0)) { - size_t read_try; - ssize_t read_got; - - if (remaining > blocksize) { - read_try = blocksize; - } else { - read_try = remaining; - } - read_got = bb_full_read(src_fd, buffer, read_try); - if (read_got < 1) { - /* count == 0 means short read - * count == -1 means read error */ - result = read_got - 1; - break; - } - if (remaining != (size_t) -1) { - remaining -= read_got; - } - - /* Process buffer */ - hash_fn_ptr(buffer, read_got, cx); - } - - /* Finalize and write the hash into our buffer. */ -#ifdef CONFIG_SHA1SUM - if (hash_algo == HASH_SHA1) { - sha1_end(hashval, &sha1_cx); - } -#endif -#ifdef CONFIG_MD5SUM - if (hash_algo == HASH_MD5) { - md5_end(hashval, &md5_cx); - } -#endif - - free(buffer); - return result; -} -- cgit v1.2.3