From 07085855adab37271ad24022cf6a64cde464036a Mon Sep 17 00:00:00 2001 From: Glenn L McGrath Date: Thu, 9 Oct 2003 07:28:22 +0000 Subject: Patch from Tito, size optimisation and fix error in exit code of -V option --- miscutils/hdparm.c | 2321 ++++++++++++++++++++++++++++------------------------ 1 file changed, 1265 insertions(+), 1056 deletions(-) (limited to 'miscutils') diff --git a/miscutils/hdparm.c b/miscutils/hdparm.c index abc3f387f..017d5bf19 100644 --- a/miscutils/hdparm.c +++ b/miscutils/hdparm.c @@ -3,7 +3,9 @@ * hdparm implementation for busybox * * - * Copyright (C) [2003] by [Matteo Croce] <3297627799@wind.it> + * Copyright (C) [2003] by [Matteo Croce] + * + * Hacked by Tito for size optimization. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,7 +27,7 @@ * hdparm.c - Command line interface to get/set hard disk parameters * - by Mark Lord (C) 1994-2002 -- freely distributable */ - + #include #include #include @@ -116,7 +118,7 @@ #define ERASE_TIME 89 /* - ordinary */ #define ENH_ERASE_TIME 90 /* - enhanced */ #define ADV_PWR 91 /* current advanced power management level - in low byte, 0x40 in high byte. */ + in low byte, 0x40 in high byte. */ #define PSWD_CODE 92 /* master password revision code */ #define HWRST_RSLT 93 /* hardware reset result */ #define ACOUSTIC 94 /* acoustic mgmt values ( >= ATA-6) */ @@ -144,7 +146,7 @@ #define NOVAL_1 0xffff /* word 0: gen_config */ -#define NOT_ATA 0x8000 +#define NOT_ATA 0x8000 #define NOT_ATAPI 0x4000 /* (check only if bit 15 == 1) */ #define MEDIA_REMOVABLE 0x0080 #define DRIVE_NOT_REMOVABLE 0x0040 /* bit obsoleted in ATA 6 */ @@ -220,7 +222,7 @@ static const char *ata1_cfg_str[] = { /* word 0 in ATA-1 mode */ /* word 1: number of logical cylinders */ #define LCYLS_MAX 0x3fff /* maximum allowable value */ -/* word 2: specific configureation +/* word 2: specific configureation * (a) require SET FEATURES to spin-up * (b) require spin-up to fully reply to IDENTIFY DEVICE */ @@ -309,7 +311,7 @@ static const char *minor_str[] = { /* word 81 value: */ "reserved" /* 0x001f-0xfffe*/ }; #endif -static const char actual_ver[] = { +static const char actual_ver[] = { /* word 81 value: */ 0, /* 0x0000 WARNING: */ 1, /* 0x0001 WARNING: */ @@ -347,7 +349,7 @@ static const char actual_ver[] = { #define CMDS_W82 0x77ff /* word 82: defined command locations*/ #define CMDS_W83 0x3fff /* word 83: defined command locations*/ #define CMDS_W84 0x002f /* word 83: defined command locations*/ -#define SUPPORT_48_BIT 0x0400 +#define SUPPORT_48_BIT 0x0400 #define NUM_CMD_FEAT_STR 48 #ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY @@ -408,7 +410,7 @@ static const char *cmd_feat_str[] = { /* words 85-87: cmds/feats enabled */ /* use cmd_feat_str[] to display what commands and features have - * been enabled with words 85-87 + * been enabled with words 85-87 */ /* words 89, 90, SECU ERASE TIME */ @@ -427,7 +429,7 @@ static const char *cmd_feat_str[] = { /* word 127: removable media status notification feature set support */ #define RM_STAT_BITS 0x0003 #define RM_STAT_SUP 0x0001 - + /* word 128: security */ #define SECU_ENABLED 0x0002 #define SECU_LEVEL 0x0010 @@ -453,39 +455,174 @@ static const char *secu_str[] = { #define SIG 0x00ff /* signature location */ #define SIG_VAL 0x00A5 /* signature value */ +#define VERSION "v5.4" + +#define TIMING_MB 64 +#define TIMING_BUF_MB 1 +#define TIMING_BUF_BYTES (TIMING_BUF_MB * 1024 * 1024) +#define TIMING_BUF_COUNT (timing_MB / TIMING_BUF_MB) +#define BUFCACHE_FACTOR 2 + +#undef DO_FLUSHCACHE /* under construction: force cache flush on -W0 */ + +/* Busybox messages and functions */ + +const char * const bb_msg_shared_mem ="could not %s sharedmem buf"; +const char * const bb_msg_op_not_supp =" operation not supported on %s disks"; + +static void bb_ioctl(int fd, int request, void *argp, const char *string) +{ + if (ioctl (fd, request, argp) != 0) + bb_error_msg(" %s", string); +} + +static void if_printf(unsigned long i, char *fmt, ... ) +{ + va_list ap; + va_start(ap, fmt); + if (i) + vprintf(fmt, ap); + va_end(ap); +} + +static void on_off (unsigned int value); + +static void if_printf_on_off(unsigned long get_arg,const char *fmt, unsigned long arg) +{ + if (get_arg) + { + printf(fmt, arg); + on_off(arg); + } +} + +static void bb_ioctl_on_off(int fd, int request, void *argp, const char *string, + const char * fmt) +{ + if (ioctl (fd, request, &argp) != 0) + bb_error_msg(" %s", string); + else + { + printf(fmt, (unsigned long) argp); + on_off((unsigned long) argp); + } +} +static void if_else_printf(unsigned long i, char *fmt1, char *fmt2, ... ) +{ + va_list ap; + va_start(ap, fmt2); + if (i) + vprintf(fmt1, ap); + else + vprintf(fmt2, ap); + va_end(ap); +} + +static void print_ascii(uint16_t *p, uint8_t length); + +static void xprint_ascii(uint16_t *val ,int i, char * string, int n) +{ + if(val[i]) + { + printf("\t%-20s",string); + print_ascii(&val[i], n); + } +} + +static void sync_and_sleep(int i) +{ + sync(); + sleep(i); +} + +static void check_if_min_and_set_val(uint16_t a, uint16_t b) +{ + if( a < b) + a = b; +} + +static void check_if_maj_and_set_val(uint16_t a, uint16_t b) +{ + if( a > b) + a = b; +} + +char * check_ptr(char *p, int argc, char **argv) +{ + if (!*p && argc && isdigit(**argv)) + p = *argv++, --argc; + return p; +} + +char * check_ptr_v2(char *p, int argc, char **argv) +{ + if (!*p && argc && isalnum(**argv)) + p = *argv++, --argc; + return p; +} + +unsigned long int set_flag(char *p, char max) +{ + if (*p >= '0' && *p <= max ) + return 1; + return 0; +} + +static void if_strcat(unsigned long test, char *modes, char *string) +{ + if (test) + strcat(modes,string); +} + +/* end of busybox specific stuff */ + #ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY -static uint8_t mode_loop(uint16_t mode_sup, uint16_t mode_sel, int cc, uint8_t *have_mode) { +static uint8_t mode_loop(uint16_t mode_sup, uint16_t mode_sel, int cc, uint8_t *have_mode) +{ uint16_t ii; uint8_t err_dma = 0; - for(ii = 0; ii <= MODE_MAX; ii++) { - if(mode_sel & 0x0001) { + + for(ii = 0; ii <= MODE_MAX; ii++) + { + if(mode_sel & 0x0001) + { printf("*%cdma%u ",cc,ii); - if(*have_mode) err_dma = 1; + if(*have_mode) + err_dma = 1; *have_mode = 1; - } else if(mode_sup & 0x0001) { - printf("%cdma%u ",cc,ii); } - mode_sup >>=1; mode_sel >>=1; + else if(mode_sup & 0x0001) + printf("%cdma%u ",cc,ii); + + mode_sup >>=1; + mode_sel >>=1; } return err_dma; } + static void print_ascii(uint16_t *p, uint8_t length) { uint8_t ii; char cl; /* find first non-space & print it */ - for(ii = 0; ii< length; ii++) { - if(((char) 0x00ff&((*p)>>8)) != ' ') break; - if((cl = (char) 0x00ff&(*p)) != ' ') { - if(cl != '\0') printf("%c",cl); - p++; ii++; + for(ii = 0; ii< length; ii++) + { + if(((char) 0x00ff&((*p)>>8)) != ' ') + break; + if((cl = (char) 0x00ff&(*p)) != ' ') + { + if_printf((cl != '\0'),"%c",cl); + p++; + ii++; break; } p++; } /* print the rest */ - for(; ii< length; ii++) { - if(!(*p)) break; /* some older devices have NULLs */ + for(; ii< length; ii++) + { + if(!(*p)) + break; /* some older devices have NULLs */ printf("%c%c",(char)0x00ff&((*p)>>8),(char)(*p)&0x00ff); p++; } @@ -499,7 +636,7 @@ static void print_ascii(uint16_t *p, uint8_t length) { static void identify (uint16_t *id_supplied, const char *devname) { - char *id_file = NULL, fmt[]="/proc/ide/%s/identify"; + char *id_file = NULL; FILE *fl; uint16_t val[256], ii, jj, kk; uint16_t like_std = 1, std = 0, min_std = 0xffff; @@ -509,29 +646,35 @@ static void identify (uint16_t *id_supplied, const char *devname) uint32_t ll, mm, nn, oo; __u64 bbbig; /* (:) */ - if (id_supplied) { + if (id_supplied) + { #if __BYTE_ORDER == __BIG_ENDIAN swab(id_supplied, val, sizeof(val)); #else memcpy(val, id_supplied, sizeof(val)); #endif - } else { - id_file = xcalloc(1, strlen(devname)+1+strlen(fmt)); - sprintf(id_file, fmt, devname); - + } + else + { + id_file = xcalloc(1, strlen(devname)+22); + sprintf(id_file, "/proc/ide/%s/identify", devname); /* open the file, read in all the info and close it */ - if (id_file == NULL) { + if (id_file == NULL) fl = stdin; - } else if(NULL == (fl = fopen(id_file, "r"))) - bb_perror_msg_and_die(id_file); + else + fl = bb_xfopen(id_file, "r"); + /* calculate checksum over all bytes */ - for(ii = GEN_CONFIG; ii<=INTEGRITY; ii++) { + for(ii = GEN_CONFIG; ii<=INTEGRITY; ii++) + { unsigned int scratch; - if(1 != fscanf(fl,"%04x",&scratch)) break; + if(1 != fscanf(fl,"%04x",&scratch)) + break; val[ii] = (uint16_t)scratch; chksum += val[ii] + (val[ii] >> 8); } - fclose(fl); + fclose(fl); + /*bb_fclose_nonstdin(fl);*/ if(ii < (INTEGRITY+1)) bb_error_msg_and_die("Input file wrong format or length"); } @@ -539,358 +682,407 @@ static void identify (uint16_t *id_supplied, const char *devname) /* check if we recognise the device type */ printf("\n"); - if(!(val[GEN_CONFIG] & NOT_ATA)) { + if(!(val[GEN_CONFIG] & NOT_ATA)) + { dev = ATA_DEV; printf("ATA device, with "); - } else if(val[GEN_CONFIG]==CFA_SUPPORT_VAL) { + } + else if(val[GEN_CONFIG]==CFA_SUPPORT_VAL) + { dev = ATA_DEV; like_std = 4; printf("CompactFlash ATA device, with "); - } else if(!(val[GEN_CONFIG] & NOT_ATAPI)) { + } + else if(!(val[GEN_CONFIG] & NOT_ATAPI)) + { dev = ATAPI_DEV; eqpt = (val[GEN_CONFIG] & EQPT_TYPE) >> SHIFT_EQPT; printf("ATAPI %s, with ", pkt_str[eqpt]); like_std = 3; - } else { - bb_error_msg_and_die("Unknown device type:\n\tbits 15&14 of general configuration word 0 both set to 1.\n"); } - if(!(val[GEN_CONFIG] & MEDIA_REMOVABLE)) - printf("non-"); - printf("removable media\n"); + else + /*"Unknown device type:\n\tbits 15&14 of general configuration word 0 both set to 1.\n"*/ + bb_error_msg_and_die("Unknown device type"); + if_printf(!(val[GEN_CONFIG] & MEDIA_REMOVABLE),"non-"); + printf("removable media\n"); /* Info from the specific configuration word says whether or not the * ID command completed correctly. It is only defined, however in - * ATA/ATAPI-5 & 6; it is reserved (value theoretically 0) in prior + * ATA/ATAPI-5 & 6; it is reserved (value theoretically 0) in prior * standards. Since the values allowed for this word are extremely * specific, it should be safe to check it now, even though we don't * know yet what standard this device is using. */ if((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==STBY_ID_VAL) || - (val[CONFIG]==PWRD_NID_VAL) || (val[CONFIG]==PWRD_ID_VAL) ) { - like_std = 5; - if((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==STBY_ID_VAL)) - printf("powers-up in standby; SET FEATURES subcmd spins-up.\n"); - if(((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==PWRD_NID_VAL)) && - (val[GEN_CONFIG] & INCOMPLETE)) - printf("\n\tWARNING: ID response incomplete.\n\tWARNING: Following data may be incorrect.\n\n"); + (val[CONFIG]==PWRD_NID_VAL) || (val[CONFIG]==PWRD_ID_VAL) ) + { + like_std = 5; + if_printf(((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==STBY_ID_VAL)), + "powers-up in standby; SET FEATURES subcmd spins-up.\n"); + if_printf((((val[CONFIG]==STBY_NID_VAL) || (val[CONFIG]==PWRD_NID_VAL)) && (val[GEN_CONFIG] & INCOMPLETE)), + "\n\tWARNING: ID response incomplete.\n\tFollowing data may be incorrect.\n\n"); } /* output the model and serial numbers and the fw revision */ - if(val[START_MODEL]) { - printf("\t%-20s","Model Number:"); - print_ascii(&val[START_MODEL], LENGTH_MODEL); - } - if(val[START_SERIAL]) { - printf("\t%-20s","Serial Number:"); - print_ascii( &val[START_SERIAL], LENGTH_SERIAL); - } - if(val[START_FW_REV]) { - printf("\t%-20s","Firmware Revision:"); - print_ascii(&val[START_FW_REV], LENGTH_FW_REV); - } - if(val[START_MEDIA]) { - printf("\t%-20s","Media Serial Num:"); - print_ascii(&val[START_MEDIA], LENGTH_MEDIA); - } - if(val[START_MANUF]) { - printf("\t%-20s","Media Manufacturer:"); - print_ascii(&val[START_MANUF], LENGTH_MANUF); - } + xprint_ascii(val, START_MODEL, "Model Number:", LENGTH_MODEL); + xprint_ascii(val, START_SERIAL, "Serial Number:", LENGTH_SERIAL); + xprint_ascii(val, START_FW_REV, "Firmware Revision:", LENGTH_FW_REV); + xprint_ascii(val, START_MEDIA, "Media Serial Num:", LENGTH_MEDIA); + xprint_ascii(val, START_MANUF, "Media Manufacturer:", LENGTH_MANUF); /* major & minor standards version number (Note: these words were not * defined until ATA-3 & the CDROM std uses different words.) */ printf("Standards:"); - if(eqpt != CDROM) { - if(val[MINOR] && (val[MINOR] <= MINOR_MAX)){ - if(like_std < 3) like_std = 3; + if(eqpt != CDROM) + { + if(val[MINOR] && (val[MINOR] <= MINOR_MAX)) + { + check_if_min_and_set_val( like_std, 3); std = actual_ver[val[MINOR]]; - if(std) { - printf("\n\tUsed: "); - printf("%s ",minor_str[val[MINOR]]); - } + if_printf(std,"\n\tUsed: %s ",minor_str[val[MINOR]]); + } /* looks like when they up-issue the std, they obsolete one; - * thus, only the newest 4 issues need be supported. (That's + * thus, only the newest 4 issues need be supported. (That's * what "kk" and "min_std" are all about.) */ - if(val[MAJOR] && (val[MAJOR] !=NOVAL_1)) { + if(val[MAJOR] && (val[MAJOR] !=NOVAL_1)) + { printf("\n\tSupported: "); jj = val[MAJOR] << 1; kk = like_std >4 ? like_std-4: 0; - for(ii = 14; (ii >0)&&(ii>kk); ii--) { - if(jj & 0x8000) { + for(ii = 14; (ii >0)&&(ii>kk); ii--) + { + if(jj & 0x8000) + { printf("%u ", ii); - if(like_std < ii) { + if(like_std < ii) + { like_std = ii; kk = like_std >4 ? like_std-4: 0; } - if(min_std > ii) min_std = ii; + check_if_maj_and_set_val(min_std, ii); } jj <<= 1; } - if(like_std < 3) like_std = 3; + check_if_min_and_set_val( like_std, 3); } /* Figure out what standard the device is using if it hasn't told * us. If we know the std, check if the device is using any of * the words from the next level up. It happens. */ - if(like_std < std) like_std = std; + check_if_min_and_set_val( like_std, std); + if(((std == 5) || (!std && (like_std < 6))) && - ( (((val[CMDS_SUPP_1] & VALID) == VALID_VAL) && - ((val[CMDS_SUPP_1] & CMDS_W83) > 0x00ff)) || - (((val[CMDS_SUPP_2] & VALID) == VALID_VAL) && - (val[CMDS_SUPP_2] & CMDS_W84) ) ) ) { + ((((val[CMDS_SUPP_1] & VALID) == VALID_VAL) && + (( val[CMDS_SUPP_1] & CMDS_W83) > 0x00ff)) || + ((( val[CMDS_SUPP_2] & VALID) == VALID_VAL) && + ( val[CMDS_SUPP_2] & CMDS_W84) ) ) ) + { like_std = 6; - } else if(((std == 4) || (!std && (like_std < 5))) && - ((((val[INTEGRITY] & SIG) == SIG_VAL) && !chksum) || - ((val[HWRST_RSLT] & VALID) == VALID_VAL) || - (((val[CMDS_SUPP_1] & VALID) == VALID_VAL) && - ((val[CMDS_SUPP_1] & CMDS_W83) > 0x001f)) ) ) { + } + else if(((std == 4) || (!std && (like_std < 5))) && + ((((val[INTEGRITY] & SIG) == SIG_VAL) && !chksum) || + (( val[HWRST_RSLT] & VALID) == VALID_VAL) || + ((( val[CMDS_SUPP_1] & VALID) == VALID_VAL) && + (( val[CMDS_SUPP_1] & CMDS_W83) > 0x001f)) ) ) + { like_std = 5; - } else if(((std == 3) || (!std && (like_std < 4))) && - ((((val[CMDS_SUPP_1] & VALID) == VALID_VAL) && - (((val[CMDS_SUPP_1] & CMDS_W83) > 0x0000) || - ((val[CMDS_SUPP_0] & CMDS_W82) > 0x000f))) || - ((val[CAPAB_1] & VALID) == VALID_VAL) || - ((val[WHATS_VALID] & OK_W88) && val[ULTRA_DMA]) || - ((val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP) ) ) { + } + else if(((std == 3) || (!std && (like_std < 4))) && + ((((val[CMDS_SUPP_1] & VALID) == VALID_VAL) && + ((( val[CMDS_SUPP_1] & CMDS_W83) > 0x0000) || + (( val[CMDS_SUPP_0] & CMDS_W82) > 0x000f))) || + (( val[CAPAB_1] & VALID) == VALID_VAL) || + (( val[WHATS_VALID] & OK_W88) && val[ULTRA_DMA]) || + (( val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP) ) ) + { like_std = 4; - } else if(((std == 2) || (!std && (like_std < 3))) && - ((val[CMDS_SUPP_1] & VALID) == VALID_VAL) ) { + } + else if(((std == 2) || (!std && (like_std < 3))) && + ((val[CMDS_SUPP_1] & VALID) == VALID_VAL) ) + { like_std = 3; - } else if(((std == 1) || (!std && (like_std < 2))) && - ((val[CAPAB_0] & (IORDY_SUP | IORDY_OFF)) || - (val[WHATS_VALID] & OK_W64_70)) ) { + } + else if(((std == 1) || (!std && (like_std < 2))) && + ((val[CAPAB_0] & (IORDY_SUP | IORDY_OFF)) || + (val[WHATS_VALID] & OK_W64_70)) ) + { like_std = 2; } - if(!std) { + if(!std) printf("\n\tLikely used: %u\n",like_std); - } else if(like_std > std) { - printf("& some of %u\n",like_std); - } else printf("\n"); - } else { + else if(like_std > std) + printf("& some of %u\n",like_std); + else + printf("\n"); + } + else + { /* TBD: do CDROM stuff more thoroughly. For now... */ kk = 0; - if(val[CDR_MINOR] == 9) { + if(val[CDR_MINOR] == 9) + { kk = 1; printf("\n\tUsed: ATAPI for CD-ROMs, SFF-8020i, r2.5"); } - if(val[CDR_MAJOR] && (val[CDR_MAJOR] !=NOVAL_1)) { + if(val[CDR_MAJOR] && (val[CDR_MAJOR] !=NOVAL_1)) + { kk = 1; printf("\n\tSupported: CD-ROM ATAPI"); jj = val[CDR_MAJOR] >> 1; - for(ii = 1; ii <15; ii++) { - if(jj & 0x0001) { - printf("-%u ", ii); - } + for(ii = 1; ii <15; ii++) + { + if_printf((jj & 0x0001),"-%u ", ii); jj >>= 1; } } - if(!kk) printf("\n\tLikely used CD-ROM ATAPI-1\n"); - else printf("\n"); + if_else_printf((!kk),"\n\tLikely used CD-ROM ATAPI-1\n","\n"); /* the cdrom stuff is more like ATA-2 than anything else, so: */ like_std = 2; } - if(min_std == 0xffff) min_std = like_std > 4 ? like_std - 3 : 1; + if(min_std == 0xffff) + min_std = like_std > 4 ? like_std - 3 : 1; printf("Configuration:\n"); /* more info from the general configuration word */ - if((eqpt != CDROM) && (like_std == 1)) { + if((eqpt != CDROM) && (like_std == 1)) + { jj = val[GEN_CONFIG] >> 1; - for(ii = 1; ii < 15; ii++) { - if(jj & 0x0001) printf("\t%s\n",ata1_cfg_str[ii]); + for(ii = 1; ii < 15; ii++) + { + if_printf((jj & 0x0001),"\t%s\n",ata1_cfg_str[ii]); jj >>=1; } } - if(dev == ATAPI_DEV) { + if(dev == ATAPI_DEV) + { printf("\tDRQ response: "); /* Data Request (DRQ) */ - switch(val[GEN_CONFIG] & DRQ_RESPONSE_TIME) { - case DRQ_3MS_VAL : printf("3ms.\n"); break; - case DRQ_INTR_VAL : printf("<=10ms with INTRQ\n"); break; - case DRQ_50US_VAL : printf("50us.\n"); break; - default : printf("unknown.\n"); break; + switch(val[GEN_CONFIG] & DRQ_RESPONSE_TIME) + { + case DRQ_3MS_VAL : + printf("3ms.\n"); + break; + case DRQ_INTR_VAL : + printf("<=10ms with INTRQ\n"); + break; + case DRQ_50US_VAL : + printf("50us.\n"); + break; + default : + printf("unknown.\n"); + break; } printf("\tPacket size: "); - switch(val[GEN_CONFIG] & PKT_SIZE_SUPPORTED) { - case PKT_SIZE_12_VAL : printf("12 bytes\n"); break; - case PKT_SIZE_16_VAL : printf("16 bytes\n"); break; - default : printf("Unknown\n"); break; + switch(val[GEN_CONFIG] & PKT_SIZE_SUPPORTED) + { + case PKT_SIZE_12_VAL : + printf("12 bytes\n"); + break; + case PKT_SIZE_16_VAL : + printf("16 bytes\n"); + break; + default : + printf("Unknown\n"); + break; } - } else { - /* addressing...CHS? See section 6.2 of ATA specs 4 or 5 */ + } + else + { + /* addressing...CHS? See section 6.2 of ATA specs 4 or 5 */ ll = (uint32_t)val[LBA_SECTS_MSB] << 16 | val[LBA_SECTS_LSB]; mm = 0; bbbig = 0; - if ( (ll > 0x00FBFC10) && (!val[LCYLS])) { + if ( (ll > 0x00FBFC10) && (!val[LCYLS])) printf("\tCHS addressing not supported\n"); - } else { + else + { jj = val[WHATS_VALID] & OK_W54_58; - printf("\tLogical\t\tmax\tcurrent\n"); - printf("\tcylinders\t%u\t%u\n",val[LCYLS],jj?val[LCYLS_CUR]:0); - printf("\theads\t\t%u\t%u\n",val[LHEADS],jj?val[LHEADS_CUR]:0); - printf("\tsectors/track\t%u\t%u\n",val[LSECTS],jj?val[LSECTS_CUR]:0); - printf("\t--\n"); - if((min_std == 1) && (val[TRACK_BYTES] || val[SECT_BYTES])) { - printf("\tbytes/track: %u",val[TRACK_BYTES]); - printf("\tbytes/sector: %u\n",val[SECT_BYTES]); - } - if(jj) { + printf("\tLogical\t\tmax\tcurrent\n\tcylinders\t%u\t%u\n\theads\t\t%u\t%u\n\tsectors/track\t%u\t%u\n\t--\n", + val[LCYLS],jj?val[LCYLS_CUR]:0, val[LHEADS],jj?val[LHEADS_CUR]:0, val[LSECTS],jj?val[LSECTS_CUR]:0); + + if_printf(((min_std == 1) && (val[TRACK_BYTES] || val[SECT_BYTES])), + "\tbytes/track: %u\tbytes/sector: %u\n",val[TRACK_BYTES], val[SECT_BYTES]); + + if(jj) + { mm = (uint32_t)val[CAPACITY_MSB] << 16 | val[CAPACITY_LSB]; - if(like_std < 3) { /* check Endian of capacity bytes */ + if(like_std < 3) + { + /* check Endian of capacity bytes */ nn = val[LCYLS_CUR] * val[LHEADS_CUR] * val[LSECTS_CUR]; oo = (uint32_t)val[CAPACITY_LSB] << 16 | val[CAPACITY_MSB]; if(abs(mm - nn) > abs(oo - nn)) mm = oo; } printf("\tCHS current addressable sectors:%11u\n",mm); - } + } } /* LBA addressing */ printf("\tLBA user addressable sectors:%11u\n",ll); if( ((val[CMDS_SUPP_1] & VALID) == VALID_VAL) && - (val[CMDS_SUPP_1] & SUPPORT_48_BIT) ) { - bbbig = (__u64)val[LBA_64_MSB] << 48 | - (__u64)val[LBA_48_MSB] << 32 | - (__u64)val[LBA_MID] << 16 | - val[LBA_LSB] ; + (val[CMDS_SUPP_1] & SUPPORT_48_BIT) ) + { + bbbig = (__u64)val[LBA_64_MSB] << 48 | + (__u64)val[LBA_48_MSB] << 32 | + (__u64)val[LBA_MID] << 16 | + val[LBA_LSB] ; printf("\tLBA48 user addressable sectors:%11llu\n",bbbig); } - if (!bbbig) bbbig = (__u64)(ll>mm ? ll : mm); /* # 512 byte blocks */ + + if (!bbbig) + bbbig = (__u64)(ll>mm ? ll : mm); /* # 512 byte blocks */ printf("\tdevice size with M = 1024*1024: %11llu MBytes\n",bbbig>>11); bbbig = (bbbig<<9)/1000000; printf("\tdevice size with M = 1000*1000: %11llu MBytes ",bbbig); - if(bbbig > 1000) printf("(%llu GB)\n",bbbig/1000); - else printf("\n"); + + if_else_printf((bbbig > 1000),"(%llu GB)\n","\n",bbbig/1000); } /* hw support of commands (capabilities) */ - printf("Capabilities:\n"); - printf("\t"); - if(dev == ATAPI_DEV) { - if(eqpt != CDROM) { - if(val[CAPAB_0] & CMD_Q_SUP) printf("Cmd queuing, "); - } - if(val[CAPAB_0] & OVLP_SUP) printf("Cmd overlap, "); + printf("Capabilities:\n\t"); + + if(dev == ATAPI_DEV) + { + if(eqpt != CDROM) + if_printf((val[CAPAB_0] & CMD_Q_SUP),"Cmd queuing, "); + + if_printf((val[CAPAB_0] & OVLP_SUP),"Cmd overlap, "); } - if(val[CAPAB_0] & LBA_SUP) printf("LBA, "); - if(like_std != 1) { + if_printf((val[CAPAB_0] & LBA_SUP),"LBA, "); + + if(like_std != 1) + { printf("IORDY"); - if(!(val[CAPAB_0] & IORDY_SUP)) printf("(may be)"); - if(val[CAPAB_0] & IORDY_OFF) printf("(can"); - else printf("(cannot"); - printf(" be disabled)"); - } else printf("no IORDY"); - printf("\n"); - if((like_std == 1) && val[BUF_TYPE]) { + if_printf((!(val[CAPAB_0] & IORDY_SUP)),"(may be)"); + if_else_printf((val[CAPAB_0] & IORDY_OFF),"(can","(cannot"); + printf(" be disabled)\n"); + } + else + printf("no IORDY\n"); + + if((like_std == 1) && val[BUF_TYPE]) + { kk = val[BUF_TYPE]; printf("\tBuffer type: %04x: ",kk); - if (kk < 2) printf("single port, single-sector"); - else printf("dual port, multi-sector"); - if (kk > 2) printf(" with read caching ability"); + if_else_printf((kk < 2),"single port, single-sector","dual port, multi-sector"); + if_printf((kk > 2)," with read caching ability"); printf("\n"); } jj = 0; - if((min_std == 1) && (val[BUFFER__SIZE] && (val[BUFFER__SIZE] != NOVAL_1))) { + if((min_std == 1) && (val[BUFFER__SIZE] && (val[BUFFER__SIZE] != NOVAL_1))) + { printf("\tBuffer size: %.1fkB",(float)val[BUFFER__SIZE]/2); jj = 1; } - if((min_std < 4) && (val[RW_LONG])) { + if((min_std < 4) && (val[RW_LONG])) + { printf("\tbytes avail on r/w long: %u",val[RW_LONG]); jj = 1; } - if((eqpt != CDROM) && (like_std > 3)) { + if((eqpt != CDROM) && (like_std > 3)) + { printf("\tQueue depth: %u",(val[QUEUE_DEPTH] & DEPTH_BITS)+1); jj = 1; } - if(jj) printf("\n"); - if(dev == ATA_DEV) { - if(like_std == 1) { - printf("\tCan"); - if(!val[DWORD_IO]) printf("not"); - printf(" perform double-word IO\n"); - } else { + if_printf(jj,"\n"); + + if(dev == ATA_DEV) + { + if(like_std == 1) + printf("\tCan%s perform double-word IO\n",(!val[DWORD_IO]) ?"not":""); + else + { printf("\tStandby timer values: spec'd by "); - if(val[CAPAB_0] & STD_STBY) printf("Standard"); - else printf("Vendor"); - if((like_std > 3) && ((val[CAPAB_1] & VALID) == VALID_VAL)) { - if(val[CAPAB_1] & MIN_STANDBY_TIMER) printf(", with "); - else printf(", no "); - printf("device specific minimum\n"); - } else printf("\n"); + if_else_printf((val[CAPAB_0] & STD_STBY),"Standard","Vendor"); + if((like_std > 3) && ((val[CAPAB_1] & VALID) == VALID_VAL)) + printf(", %s device specific minimum\n",(val[CAPAB_1] & MIN_STANDBY_TIMER)?"with":"no"); + else + printf("\n"); } printf("\tR/W multiple sector transfer: "); - if((like_std < 3) && !(val[SECTOR_XFER_MAX] & SECTOR_XFER)) { + if((like_std < 3) && !(val[SECTOR_XFER_MAX] & SECTOR_XFER)) printf("not supported\n"); - } else { - printf("Max = %u\t",val[SECTOR_XFER_MAX] & SECTOR_XFER); - printf("Current = "); - if(val[SECTOR_XFER_CUR] & MULTIPLE_SETTING_VALID) - printf("%u\n",val[SECTOR_XFER_CUR] & SECTOR_XFER); - else printf("?\n"); + else + { + printf("Max = %u\tCurrent = ",val[SECTOR_XFER_MAX] & SECTOR_XFER); + if_else_printf((val[SECTOR_XFER_CUR] & MULTIPLE_SETTING_VALID), + "%u\n","?\n",val[SECTOR_XFER_CUR] & SECTOR_XFER); } - if((like_std > 3) && (val[CMDS_SUPP_1] & 0x0008)) { + if((like_std > 3) && (val[CMDS_SUPP_1] & 0x0008)) + { /* We print out elsewhere whether the APM feature is enabled or not. If it's not enabled, let's not repeat the info; just print nothing here. */ - printf("\tAdvanced power management level: "); - if ( (val[ADV_PWR] & 0xFF00) == 0x4000 ) { + printf("\tAdvancedPM level: "); + if ( (val[ADV_PWR] & 0xFF00) == 0x4000 ) + { uint8_t apm_level = val[ADV_PWR] & 0x00FF; - printf("%u (0x%x)\n", apm_level, apm_level); - } else { - printf("unknown setting (0x%04x)\n", val[ADV_PWR]); - } - } - if(like_std > 5) { - if(val[ACOUSTIC]) { - printf("\tRecommended acoustic management value: %u, current value: %u\n", (val[ACOUSTIC] >> 8) & 0x00ff, val[ACOUSTIC] & 0x00ff); } + else + printf("unknown setting (0x%04x)\n", val[ADV_PWR]); } - } else { /* ATAPI */ - if(eqpt != CDROM) { - if(val[CAPAB_0] & SWRST_REQ) printf("\tATA sw reset required\n"); + if(like_std > 5) + { + if_printf(val[ACOUSTIC],"\tRecommended acoustic management value: %u, current value: %u\n", + (val[ACOUSTIC] >> 8) & 0x00ff, val[ACOUSTIC] & 0x00ff); } - if(val[PKT_REL] || val[SVC_NBSY]) { + } + else + { + /* ATAPI */ + if(eqpt != CDROM) + if_printf((val[CAPAB_0] & SWRST_REQ),"\tATA sw reset required\n"); + + if(val[PKT_REL] || val[SVC_NBSY]) + { printf("\tOverlap support:"); - if(val[PKT_REL]) printf(" %uus to release bus.",val[PKT_REL]); - if(val[SVC_NBSY]) printf(" %uus to clear BSY after SERVICE cmd.",val[SVC_NBSY]); + if_printf(val[PKT_REL]," %uus to release bus.",val[PKT_REL]); + if_printf(val[SVC_NBSY]," %uus to clear BSY after SERVICE cmd.",val[SVC_NBSY]); printf("\n"); } } /* DMA stuff. Check that only one DMA mode is selected. */ printf("\tDMA: "); - if(!(val[CAPAB_0] & DMA_SUP)) { + if(!(val[CAPAB_0] & DMA_SUP)) printf("not supported\n"); - } else { - if(val[DMA_MODE] && !val[SINGLE_DMA] && !val[MULTI_DMA]) - printf(" sdma%u\n",(val[DMA_MODE] & MODE) >> 8); - if(val[SINGLE_DMA]) { - jj = val[SINGLE_DMA]; kk = val[SINGLE_DMA] >> 8; + else + { + if_printf((val[DMA_MODE] && !val[SINGLE_DMA] && !val[MULTI_DMA]), + " sdma%u\n",(val[DMA_MODE] & MODE) >> 8); + if(val[SINGLE_DMA]) + { + jj = val[SINGLE_DMA]; + kk = val[SINGLE_DMA] >> 8; err_dma += mode_loop(jj,kk,'s',&have_mode); } - if(val[MULTI_DMA]) { - jj = val[MULTI_DMA]; kk = val[MULTI_DMA] >> 8; + if(val[MULTI_DMA]) + { + jj = val[MULTI_DMA]; + kk = val[MULTI_DMA] >> 8; err_dma += mode_loop(jj,kk,'m',&have_mode); } - if((val[WHATS_VALID] & OK_W88) && val[ULTRA_DMA]) { - jj = val[ULTRA_DMA]; kk = val[ULTRA_DMA] >> 8; + if((val[WHATS_VALID] & OK_W88) && val[ULTRA_DMA]) + { + jj = val[ULTRA_DMA]; + kk = val[ULTRA_DMA] >> 8; err_dma += mode_loop(jj,kk,'u',&have_mode); } - if(err_dma || !have_mode) printf("(?)"); + if_printf((err_dma || !have_mode),"(?)"); printf("\n"); - if((dev == ATAPI_DEV) && (eqpt != CDROM) && (val[CAPAB_0] & DMA_IL_SUP)) - printf("\t Interleaved DMA support\n"); + if_printf(((dev == ATAPI_DEV) && (eqpt != CDROM) && (val[CAPAB_0] & DMA_IL_SUP)), + "\t Interleaved DMA support\n"); if((val[WHATS_VALID] & OK_W64_70) && - (val[DMA_TIME_MIN] || val[DMA_TIME_NORM])) { + (val[DMA_TIME_MIN] || val[DMA_TIME_NORM])) + { printf("\t Cycle time:"); - if(val[DMA_TIME_MIN]) - printf(" min=%uns",val[DMA_TIME_MIN]); - if(val[DMA_TIME_NORM]) - printf(" recommended=%uns",val[DMA_TIME_NORM]); + if_printf(val[DMA_TIME_MIN]," min=%uns",val[DMA_TIME_MIN]); + if_printf(val[DMA_TIME_NORM]," recommended=%uns",val[DMA_TIME_NORM]); printf("\n"); } } @@ -899,98 +1091,115 @@ static void identify (uint16_t *id_supplied, const char *devname) printf("\tPIO: "); /* If a drive supports mode n (e.g. 3), it also supports all modes less * than n (e.g. 3, 2, 1 and 0). Print all the modes. */ - if((val[WHATS_VALID] & OK_W64_70) && (val[ADV_PIO_MODES] & PIO_SUP)) { + if((val[WHATS_VALID] & OK_W64_70) && (val[ADV_PIO_MODES] & PIO_SUP)) + { jj = ((val[ADV_PIO_MODES] & PIO_SUP) << 3) | 0x0007; - for(ii = 0; ii <= PIO_MODE_MAX ; ii++) { - if(jj & 0x0001) - printf("pio%d ",ii); + for(ii = 0; ii <= PIO_MODE_MAX ; ii++) + { + if_printf((jj & 0x0001),"pio%d ",ii); jj >>=1; } printf("\n"); - } else if(((min_std < 5) || (eqpt == CDROM)) && (val[PIO_MODE] & MODE) ) { - for(ii = 0; ii <= val[PIO_MODE]>>8; ii++) { + } + else if(((min_std < 5) || (eqpt == CDROM)) && (val[PIO_MODE] & MODE) ) + { + for(ii = 0; ii <= val[PIO_MODE]>>8; ii++) printf("pio%d ",ii); - } printf("\n"); - } else printf("unknown\n"); - if(val[WHATS_VALID] & OK_W64_70) { - if(val[PIO_NO_FLOW] || val[PIO_FLOW]) { + } + else + printf("unknown\n"); + + if(val[WHATS_VALID] & OK_W64_70) + { + if(val[PIO_NO_FLOW] || val[PIO_FLOW]) + { printf("\t Cycle time:"); - if(val[PIO_NO_FLOW]) - printf(" no flow control=%uns", val[PIO_NO_FLOW]); - if(val[PIO_FLOW]) - printf(" IORDY flow control=%uns", val[PIO_FLOW]); + if_printf(val[PIO_NO_FLOW]," no flow control=%uns", val[PIO_NO_FLOW]); + if_printf(val[PIO_FLOW]," IORDY flow control=%uns", val[PIO_FLOW]); printf("\n"); } } - if((val[CMDS_SUPP_1] & VALID) == VALID_VAL){ + if((val[CMDS_SUPP_1] & VALID) == VALID_VAL) + { printf("Commands/features:\n\tEnabled\tSupported:\n"); jj = val[CMDS_SUPP_0]; kk = val[CMDS_EN_0]; - for(ii = 0; ii < NUM_CMD_FEAT_STR; ii++) { - if((jj & 0x8000) && (*cmd_feat_str[ii] != '\0')) { - if(kk & 0x8000) printf("\t *"); - else printf("\t"); + for(ii = 0; ii < NUM_CMD_FEAT_STR; ii++) + { + if((jj & 0x8000) && (*cmd_feat_str[ii] != '\0')) + { + if_else_printf((kk & 0x8000),"\t *","\t"); printf("\t%s\n",cmd_feat_str[ii]); } jj <<=1; kk<<=1; - if(ii%16 == 15) { + if(ii%16 == 15) + { jj = val[CMDS_SUPP_0+1+(ii/16)]; kk = val[CMDS_EN_0+1+(ii/16)]; } - if(ii == 31) { - if((val[CMDS_SUPP_2] & VALID) != VALID_VAL) ii +=16; + if(ii == 31) + { + if((val[CMDS_SUPP_2] & VALID) != VALID_VAL) + ii +=16; } } } - if((val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP) - printf("\tRemovable Media Status Notification feature set supported\n"); - - + if_printf(((val[RM_STAT] & RM_STAT_BITS) == RM_STAT_SUP), + "\tRemovable Media Status Notification feature set supported\n"); + + /* security */ - if((eqpt != CDROM) && (like_std > 3) && - (val[SECU_STATUS] || val[ERASE_TIME] || val[ENH_ERASE_TIME])) { + if((eqpt != CDROM) && (like_std > 3) && + (val[SECU_STATUS] || val[ERASE_TIME] || val[ENH_ERASE_TIME])) + { printf("Security: \n"); - if(val[PSWD_CODE] && (val[PSWD_CODE] != NOVAL_1)) - printf("\tMaster password revision code = %u\n",val[PSWD_CODE]); + if_printf((val[PSWD_CODE] && (val[PSWD_CODE] != NOVAL_1)), + "\tMaster password revision code = %u\n",val[PSWD_CODE]); jj = val[SECU_STATUS]; - if(jj) { - for(ii = 0; ii < NUM_SECU_STR; ii++) { - if(!(jj & 0x0001)) printf("\tnot\t"); - else printf("\t\t"); - printf("%s\n",secu_str[ii]); + if(jj) + { + for(ii = 0; ii < NUM_SECU_STR; ii++) + { + if_else_printf((!(jj & 0x0001)),"\tnot\t%s\n", "\t\t%s\n", secu_str[ii]); jj >>=1; } - if(val[SECU_STATUS] & SECU_ENABLED) { + if(val[SECU_STATUS] & SECU_ENABLED) + { printf("\tSecurity level "); - if(val[SECU_STATUS] & SECU_LEVEL) printf("maximum\n"); - else printf("high\n"); + if_else_printf((val[SECU_STATUS] & SECU_LEVEL),"maximum\n","high\n"); } } jj = val[ERASE_TIME] & ERASE_BITS; kk = val[ENH_ERASE_TIME] & ERASE_BITS; - if(jj || kk) { + if(jj || kk) + { printf("\t"); - if(jj) printf("%umin for SECURITY ERASE UNIT. ", jj==ERASE_BITS ? 508 : jj<<1); - if(kk) printf("%umin for ENHANCED SECURITY ERASE UNIT.", kk==ERASE_BITS ? 508 : kk<<1); + if_printf(jj,"%umin for SECURITY ERASE UNIT. ", jj==ERASE_BITS ? 508 : jj<<1); + if_printf(kk,"%umin for ENHANCED SECURITY ERASE UNIT.", kk==ERASE_BITS ? 508 : kk<<1); printf("\n"); } } /* reset result */ - if((val[HWRST_RSLT] & VALID) == VALID_VAL) { + if((val[HWRST_RSLT] & VALID) == VALID_VAL) + { printf("HW reset results:\n"); - if(val[HWRST_RSLT] & CBLID) printf("\tCBLID- above Vih\n"); - else printf("\tCBLID- below Vih\n"); - if(val[HWRST_RSLT] & RST0) { + if_else_printf((val[HWRST_RSLT] & CBLID),"\tCBLID- above Vih\n","\tCBLID- below Vih\n"); + + if(val[HWRST_RSLT] & RST0) + { printf("\tDevice num = 0"); jj = val[HWRST_RSLT]; - } else { + } + else + { printf("\tDevice num = 1"); jj = val[HWRST_RSLT] >> 8; } - if((jj & DEV_DET) == JUMPER_VAL) + + if((jj & DEV_DET) == JUMPER_VAL) printf(" determined by the jumper"); else if((jj & DEV_DET) == CSEL_VAL) printf(" determined by CSEL"); @@ -998,21 +1207,22 @@ static void identify (uint16_t *id_supplied, const char *devname) } /* more stuff from std 5 */ - if((like_std > 4) && (eqpt != CDROM)) { - if(val[CFA_PWR_MODE] & VALID_W160) { + if((like_std > 4) && (eqpt != CDROM)) + { + if(val[CFA_PWR_MODE] & VALID_W160) + { printf("CFA power mode 1:\n\t"); - if(val[CFA_PWR_MODE] & PWR_MODE_OFF) printf("dis"); - else printf("en"); - printf("abled"); - if(val[CFA_PWR_MODE] & PWR_MODE_REQ) - printf(" and required by some commands"); + if_else_printf((val[CFA_PWR_MODE] & PWR_MODE_OFF),"disabled","enabled"); + + if_printf((val[CFA_PWR_MODE] & PWR_MODE_REQ)," and required by some commands"); printf("\n"); - if(val[CFA_PWR_MODE] & MAX_AMPS) - printf("\tMaximum current = %uma\n",val[CFA_PWR_MODE] & MAX_AMPS); + + if_printf((val[CFA_PWR_MODE] & MAX_AMPS),"\tMaximum current = %uma\n",val[CFA_PWR_MODE] & MAX_AMPS); } - if((val[INTEGRITY] & SIG) == SIG_VAL) { + if((val[INTEGRITY] & SIG) == SIG_VAL) + { printf("Checksum: "); - if(chksum) printf("in"); + if_printf(chksum,"in"); printf("correct\n"); } } @@ -1021,23 +1231,13 @@ static void identify (uint16_t *id_supplied, const char *devname) } #endif -#define VERSION "v5.4" - -#define TIMING_MB 64 -#define TIMING_BUF_MB 1 -#define TIMING_BUF_BYTES (TIMING_BUF_MB * 1024 * 1024) -#define TIMING_BUF_COUNT (timing_MB / TIMING_BUF_MB) -#define BUFCACHE_FACTOR 2 - -#undef DO_FLUSHCACHE /* under construction: force cache flush on -W0 */ - static int verbose = 0, get_identity = 0, get_geom = 0, noisy = 1, quiet = 0; static int flagcount = 0, do_flush = 0, is_scsi_hd = 0, is_xt_hd = 0; static int do_ctimings, do_timings = 0; -static unsigned long set_readahead= 0, get_readahead= 0, readahead= 0; +static unsigned long set_readahead= 0, get_readahead= 0, readahead= 0; static unsigned long set_readonly = 0, get_readonly = 0, readonly = 0; -static unsigned long set_unmask = 0, get_unmask = 0, unmask = 0; +static unsigned long set_unmask = 0, get_unmask = 0, unmask = 0; static unsigned long set_mult = 0, get_mult = 0, mult = 0; #ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA static unsigned long set_dma = 0, get_dma = 0, dma = 0; @@ -1110,16 +1310,6 @@ static const char *cfg_str[] = static const char *BuffType[] = {"unknown", "1Sect", "DualPort", "DualPortCache"}; -#define YN(b) (((b)==0)?"no":"yes") - -static void dmpstr (const char *prefix, unsigned int i, const char *s[], unsigned int maxi) -{ - if (i > maxi) - printf("%s%u", prefix, i); - else - printf("%s%s", prefix, s[i]); -} - static void dump_identity (const struct hd_driveid *id) { int i; @@ -1127,20 +1317,23 @@ static void dump_identity (const struct hd_driveid *id) const unsigned short int *id_regs= (const void*) id; unsigned long capacity; - printf("\n Model=%.40s, FwRev=%.8s, SerialNo=%.20s", - id->model, id->fw_rev, id->serial_no); - printf("\n Config={"); - for (i=0; i<=15; i++) { - if (id->config & (1<cyls, id->heads, id->sectors, - id->track_bytes, id->sector_bytes, id->ecc_bytes); - dmpstr(" BuffType=",id->buf_type,BuffType,3); + printf("\n Model=%.40s, FwRev=%.8s, SerialNo=%.20s\n Config={", + id->model, id->fw_rev, id->serial_no); + for (i=0; i<=15; i++) + if_printf((id->config & (1<cyls, id->heads, id->sectors, id->track_bytes, + id->sector_bytes, id->ecc_bytes); + + if (id->buf_type > 3) + printf("%s%u", " BuffType=", id->buf_type); + else + printf("%s%s", " BuffType=", BuffType[id->buf_type]); + printf(", BuffSize=%ukB, MaxMultSect=%u", id->buf_size/2, id->max_multsect); - if (id->max_multsect) { + if (id->max_multsect) + { printf(", MultSect="); if (!(id->multsect_valid&1)) printf("?%u?", id->multsect); @@ -1149,42 +1342,46 @@ static void dump_identity (const struct hd_driveid *id) else printf("off"); } - putchar('\n'); - if (id->tPIO <= 5) { + printf("\n"); + if (id->tPIO <= 5) + { strcat(pmodes, "pio0 "); - if (id->tPIO >= 1) strcat(pmodes, "pio1 "); - if (id->tPIO >= 2) strcat(pmodes, "pio2 "); + if_strcat((id->tPIO >= 1), pmodes, "pio1 "); + if_strcat((id->tPIO >= 2), pmodes, "pio2 "); + } - if (!(id->field_valid&1)) - printf(" (maybe):"); + if_printf((!(id->field_valid&1))," (maybe):"); #if __BYTE_ORDER == __BIG_ENDIAN capacity = (id->cur_capacity0 << 16) | id->cur_capacity1; #else capacity = (id->cur_capacity1 << 16) | id->cur_capacity0; #endif - printf(" CurCHS=%u/%u/%u, CurSects=%lu", id->cur_cyls, id->cur_heads, id->cur_sectors, capacity); - printf(", LBA=%s", YN(id->capability&2)); - if (id->capability&2) - printf(", LBAsects=%u", id->lba_capacity); - - if (id->capability&1) { - if (id->dma_1word | id->dma_mword) { - if (id->dma_1word & 0x100) strcat(dmodes,"*"); - if (id->dma_1word & 1) strcat(dmodes,"sdma0 "); - if (id->dma_1word & 0x200) strcat(dmodes,"*"); - if (id->dma_1word & 2) strcat(dmodes,"sdma1 "); - if (id->dma_1word & 0x400) strcat(dmodes,"*"); - if (id->dma_1word & 4) strcat(dmodes,"sdma2 "); - if (id->dma_1word & 0xf800) strcat(dmodes,"*"); - if (id->dma_1word & 0xf8) strcat(dmodes,"sdma? "); - if (id->dma_mword & 0x100) strcat(dmodes,"*"); - if (id->dma_mword & 1) strcat(dmodes,"mdma0 "); - if (id->dma_mword & 0x200) strcat(dmodes,"*"); - if (id->dma_mword & 2) strcat(dmodes,"mdma1 "); - if (id->dma_mword & 0x400) strcat(dmodes,"*"); - if (id->dma_mword & 4) strcat(dmodes,"mdma2 "); - if (id->dma_mword & 0xf800) strcat(dmodes,"*"); - if (id->dma_mword & 0xf8) strcat(dmodes,"mdma? "); + printf(" CurCHS=%u/%u/%u, CurSects=%lu, LBA=%s",id->cur_cyls, id->cur_heads, + id->cur_sectors, capacity , + ((id->capability&2)==0)?"no":"yes"); + + if_printf((id->capability&2),", LBAsects=%u", id->lba_capacity); + + if (id->capability&1) + { + if (id->dma_1word | id->dma_mword) + { + if_strcat((id->dma_1word & 0x100), dmodes, "*"); + if_strcat((id->dma_1word & 1), dmodes, "sdma0 "); + if_strcat((id->dma_1word & 0x200), dmodes, "*"); + if_strcat((id->dma_1word & 2), dmodes, "sdma1 "); + if_strcat((id->dma_1word & 0x400), dmodes, "*"); + if_strcat((id->dma_1word & 4), dmodes, "sdma2 "); + if_strcat((id->dma_1word & 0xf800), dmodes, "*"); + if_strcat((id->dma_1word & 0xf8), dmodes, "sdma? "); + if_strcat((id->dma_mword & 0x100), dmodes, "*"); + if_strcat((id->dma_mword & 1), dmodes, "mdma0 "); + if_strcat((id->dma_mword & 0x200), dmodes, "*"); + if_strcat((id->dma_mword & 2), dmodes, "mdma1 "); + if_strcat((id->dma_mword & 0x400), dmodes, "*"); + if_strcat((id->dma_mword & 4), dmodes, "mdma2 "); + if_strcat((id->dma_mword & 0xf800), dmodes, "*"); + if_strcat((id->dma_mword & 0xf8), dmodes, "mdma? "); } } printf("\n IORDY="); @@ -1192,116 +1389,117 @@ static void dump_identity (const struct hd_driveid *id) printf((id->capability&4) ? "on/off" : "yes"); else printf("no"); - if ((id->capability&8) || (id->field_valid&2)) { - if (id->field_valid&2) { + + if ((id->capability&8) || (id->field_valid&2)) + { + if (id->field_valid&2) + { printf(", tPIO={min:%u,w/IORDY:%u}", id->eide_pio, id->eide_pio_iordy); - if (id->eide_pio_modes & 1) strcat(pmodes, "pio3 "); - if (id->eide_pio_modes & 2) strcat(pmodes, "pio4 "); - if (id->eide_pio_modes &~3) strcat(pmodes, "pio? "); - } - if (id->field_valid&4) { - if (id->dma_ultra & 0x100) strcat(umodes,"*"); - if (id->dma_ultra & 0x001) strcat(umodes,"udma0 "); - if (id->dma_ultra & 0x200) strcat(umodes,"*"); - if (id->dma_ultra & 0x002) strcat(umodes,"udma1 "); - if (id->dma_ultra & 0x400) strcat(umodes,"*"); - if (id->dma_ultra & 0x004) strcat(umodes,"udma2 "); + if_strcat((id->eide_pio_modes & 1), pmodes, "pio3 "); + if_strcat((id->eide_pio_modes & 2), pmodes, "pio4 "); + if_strcat((id->eide_pio_modes &~3), pmodes, "pio? "); + } + if (id->field_valid&4) + { + if_strcat((id->dma_ultra & 0x100),umodes,"*"); + if_strcat((id->dma_ultra & 0x001),umodes,"udma0 "); + if_strcat((id->dma_ultra & 0x200),umodes,"*"); + if_strcat((id->dma_ultra & 0x002),umodes,"udma1 "); + if_strcat((id->dma_ultra & 0x400),umodes,"*"); + if_strcat((id->dma_ultra & 0x004),umodes,"udma2 "); #ifdef __NEW_HD_DRIVE_ID - if (id->hw_config & 0x2000) { + if (id->hw_config & 0x2000) + { #else /* !__NEW_HD_DRIVE_ID */ - if (id->word93 & 0x2000) { + if (id->word93 & 0x2000) + { #endif /* __NEW_HD_DRIVE_ID */ - if (id->dma_ultra & 0x0800) strcat(umodes,"*"); - if (id->dma_ultra & 0x0008) strcat(umodes,"udma3 "); - if (id->dma_ultra & 0x1000) strcat(umodes,"*"); - if (id->dma_ultra & 0x0010) strcat(umodes,"udma4 "); - if (id->dma_ultra & 0x2000) strcat(umodes,"*"); - if (id->dma_ultra & 0x0020) strcat(umodes,"udma5 "); - if (id->dma_ultra & 0x4000) strcat(umodes,"*"); - if (id->dma_ultra & 0x0040) strcat(umodes,"udma6 "); - if (id->dma_ultra & 0x8000) strcat(umodes,"*"); - if (id->dma_ultra & 0x0080) strcat(umodes,"udma7 "); + if_strcat((id->dma_ultra & 0x0800),umodes,"*"); + if_strcat((id->dma_ultra & 0x0008),umodes,"udma3 "); + if_strcat((id->dma_ultra & 0x1000),umodes,"*"); + if_strcat((id->dma_ultra & 0x0010),umodes,"udma4 "); + if_strcat((id->dma_ultra & 0x2000),umodes,"*"); + if_strcat((id->dma_ultra & 0x0020),umodes,"udma5 "); + if_strcat((id->dma_ultra & 0x4000),umodes,"*"); + if_strcat((id->dma_ultra & 0x0040),umodes,"udma6 "); + if_strcat((id->dma_ultra & 0x8000),umodes,"*"); + if_strcat((id->dma_ultra & 0x0080),umodes,"udma7 "); } } } - if ((id->capability&1) && (id->field_valid&2)) - printf(", tDMA={min:%u,rec:%u}", id->eide_dma_min, id->eide_dma_time); + if_printf(((id->capability&1) && (id->field_valid&2)), + ", tDMA={min:%u,rec:%u}", id->eide_dma_min, id->eide_dma_time); printf("\n PIO modes: %s", pmodes); - if (*dmodes) - printf("\n DMA modes: %s", dmodes); - if (*umodes) - printf("\n UDMA modes: %s", umodes); - - printf("\n AdvancedPM=%s",YN(id_regs[83]&8)); - if (id_regs[83] & 8) { - if (!(id_regs[86]&8)) - printf(": disabled (255)"); - else if ((id_regs[91]&0xFF00)!=0x4000) - printf(": unknown setting"); - else - printf(": mode=0x%02X (%u)",id_regs[91]&0xFF,id_regs[91]&0xFF); - } - if (id_regs[82]&0x20) - printf(" WriteCache=%s",(id_regs[85]&0x20) ? "enabled" : "disabled"); + if_printf((*dmodes),"\n DMA modes: %s", dmodes); + if_printf((*umodes),"\n UDMA modes: %s", umodes); + + printf("\n AdvancedPM=%s",((id_regs[83]&8)==0)?"no":"yes"); + if (id_regs[83] & 8) + { + if (!(id_regs[86]&8)) + printf(": disabled (255)"); + else if ((id_regs[91]&0xFF00)!=0x4000) + printf(": unknown setting"); + else + printf(": mode=0x%02X (%u)",id_regs[91]&0xFF,id_regs[91]&0xFF); + } + if_printf( (id_regs[82]&0x20)," WriteCache=%s",(id_regs[85]&0x20) ? "enabled" : "disabled"); #ifdef __NEW_HD_DRIVE_ID - if ((id->minor_rev_num && id->minor_rev_num <= 31) || (id->major_rev_num && id->minor_rev_num <= 31)) { + if ((id->minor_rev_num && id->minor_rev_num <= 31) || (id->major_rev_num && id->minor_rev_num <= 31)) + { printf("\n Drive conforms to: "); - if (id->minor_rev_num <= 31) - printf("%s: ", minor_str[id->minor_rev_num]); - else - printf("unknown: "); - if (id->major_rev_num < 31) { - for (i=0; i <= 15; i++) { - if (id->major_rev_num & (1<minor_rev_num <= 31),"%s: ","unknown: ", minor_str[id->minor_rev_num]); + if (id->major_rev_num < 31) + { + for (i=0; i <= 15; i++) + if_printf((id->major_rev_num & (1< 0; --i) { - if (seek_to_zero (fd)) goto quit; - if (read_big_block (fd, buf)) goto quit; - } - getitimer(ITIMER_REAL, &e2); - correction = (e1.it_value.tv_sec - e2.it_value.tv_sec) - + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0); - - /* Now remove the lseek() from the correction factor */ - getitimer(ITIMER_REAL, &e1); - for (i = (BUFCACHE_FACTOR * TIMING_BUF_COUNT) ; i > 0; --i) { - if (seek_to_zero (fd)) goto quit; - } - getitimer(ITIMER_REAL, &e2); - correction -= (e1.it_value.tv_sec - e2.it_value.tv_sec) - + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0); - - if ((BUFCACHE_FACTOR * timing_MB) >= correction) /* more than 1MB/s */ - printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n", - (BUFCACHE_FACTOR * timing_MB), correction, - (BUFCACHE_FACTOR * timing_MB) / correction); - else - printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n", - (BUFCACHE_FACTOR * timing_MB), correction, - (BUFCACHE_FACTOR * timing_MB) / correction * 1024); - correction /= BUFCACHE_FACTOR; - - flush_buffer_cache(fd); - sleep(1); -quit: - if (-1 == shmdt(buf)) - bb_perror_msg ("could not detach sharedmem buf"); -} - -void time_device (int fd) -{ - int i; - char *buf; - double elapsed; - struct itimerval e1, e2; - int shmid; - int timing_MB = TIMING_MB; + sync_and_sleep(3); + + if(flag == 0) /* Time cache */ + { + /* Calculate a correction factor for the basic + * overhead of doing a read() from the buffer cache. + * To do this, we read the data once to "cache it" and + * to force full preallocation of our timing buffer, + * and then we re-read it 10 times while timing it. + * + * getitimer() is used rather than gettimeofday() because + * it is much more consistent (on my machine, at least). + */ + setitimer(ITIMER_REAL, &(struct itimerval){{1000,0},{1000,0}}, NULL); + if (seek_to_zero (fd)) + return; + if (read_big_block (fd, buf)) + return; + printf(" Timing buffer-cache reads: "); + fflush(stdout); + + /* Clear out the device request queues & give them time to complete */ + sync_and_sleep(1); + + /* Time re-reading from the buffer-cache */ + getitimer(ITIMER_REAL, &e1); + for (i = (BUFCACHE_FACTOR * TIMING_BUF_COUNT) ; i > 0; --i) + { + if (seek_to_zero (fd)) + goto quit; + if (read_big_block (fd, buf)) + goto quit; + } + getitimer(ITIMER_REAL, &e2); + correction = (e1.it_value.tv_sec - e2.it_value.tv_sec) + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0); + + /* Now remove the lseek() from the correction factor */ + getitimer(ITIMER_REAL, &e1); + for (i = (BUFCACHE_FACTOR * TIMING_BUF_COUNT) ; i > 0; --i) + { + if (seek_to_zero (fd)) + goto quit; + } + getitimer(ITIMER_REAL, &e2); + correction -= (e1.it_value.tv_sec - e2.it_value.tv_sec) + + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0); + + if ((BUFCACHE_FACTOR * timing_MB) >= correction) /* more than 1MB/s */ + printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n", + (BUFCACHE_FACTOR * timing_MB), correction, + (BUFCACHE_FACTOR * timing_MB) / correction); + else + printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n", + (BUFCACHE_FACTOR * timing_MB), correction, + (BUFCACHE_FACTOR * timing_MB) / correction * 1024); + correction /= BUFCACHE_FACTOR; - if ((shmid = shmget(IPC_PRIVATE, TIMING_BUF_BYTES, 0600)) == -1) { - bb_perror_msg ("could not allocate sharedmem buf"); - return; - } - if (shmctl(shmid, SHM_LOCK, NULL) == -1) { - bb_perror_msg ("could not lock sharedmem buf"); - (void) shmctl(shmid, IPC_RMID, NULL); - return; - } - if ((buf = shmat(shmid, (char *) 0, 0)) == (char *) -1) { - bb_perror_msg ("could not attach sharedmem buf"); - (void) shmctl(shmid, IPC_RMID, NULL); - return; + flush_buffer_cache(fd); + sleep(1); } - if (shmctl(shmid, IPC_RMID, NULL) == -1) - bb_perror_msg ("shmctl(,IPC_RMID,) failed"); + else /* Time device */ + { + printf(" Timing buffered disk reads: "); + fflush(stdout); - /* Clear out the device request queues & give them time to complete */ - sync(); - sleep(3); + /* + * getitimer() is used rather than gettimeofday() because + * it is much more consistent (on my machine, at least). + */ + setitimer(ITIMER_REAL, &(struct itimerval){{1000,0},{1000,0}}, NULL); - printf(" Timing buffered disk reads: "); - fflush(stdout); + /* Now do the timings for real */ + getitimer(ITIMER_REAL, &e1); + for (i = TIMING_BUF_COUNT; i > 0; --i) + { + if (read_big_block (fd, buf)) + goto quit; + } + getitimer(ITIMER_REAL, &e2); - /* - * getitimer() is used rather than gettimeofday() because - * it is much more consistent (on my machine, at least). - */ - setitimer(ITIMER_REAL, &(struct itimerval){{1000,0},{1000,0}}, NULL); + elapsed = (e1.it_value.tv_sec - e2.it_value.tv_sec) + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0); - /* Now do the timings for real */ - getitimer(ITIMER_REAL, &e1); - for (i = TIMING_BUF_COUNT; i > 0; --i) { - if (read_big_block (fd, buf)) goto quit; - } - getitimer(ITIMER_REAL, &e2); + if (timing_MB >= elapsed) /* more than 1MB/s */ + printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n",timing_MB, elapsed, timing_MB / elapsed); + else + printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n",timing_MB, elapsed, timing_MB / elapsed * 1024); - elapsed = (e1.it_value.tv_sec - e2.it_value.tv_sec) - + ((e1.it_value.tv_usec - e2.it_value.tv_usec) / 1000000.0); - if (timing_MB >= elapsed) /* more than 1MB/s */ - printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n", - timing_MB, elapsed, timing_MB / elapsed); - else - printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n", - timing_MB, elapsed, timing_MB / elapsed * 1024); + /*"Hmm.. suspicious results: probably not enough free memory for a proper test.");*/ + if (elapsed <= (correction * 2)) + bb_error_msg(bb_msg_memory_exhausted); - if (elapsed <= (correction * 2)) - printf("Hmm.. suspicious results: probably not enough free memory for a proper test.\n"); #if 0 /* the "estimate" is just plain wrong for many systems.. */ - else if (correction != 0.0) { - printf(" Estimating raw driver speed: "); - elapsed -= correction; - if (timing_MB >= elapsed) /* more than 1MB/s */ - printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n", - timing_MB, elapsed, timing_MB / elapsed); - else - printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n", - timing_MB, elapsed, timing_MB / elapsed * 1024); - } + else if (correction != 0.0) { + printf(" Estimating raw driver speed: "); + elapsed -= correction; + if (timing_MB >= elapsed) /* more than 1MB/s */ + printf("%2d MB in %5.2f seconds =%6.2f MB/sec\n", + timing_MB, elapsed, timing_MB / elapsed); + else + printf("%2d MB in %5.2f seconds =%6.2f kB/sec\n", + timing_MB, elapsed, timing_MB / elapsed * 1024); + } #endif + } quit: if (-1 == shmdt(buf)) - bb_perror_msg ("could not detach sharedmem buf"); + bb_error_msg (bb_msg_shared_mem,"detach"); /*"could not detach sharedmem buf"*/ } + static void no_scsi (void) { - if (is_scsi_hd) { - bb_error_msg_and_die(" operation not supported on SCSI disks\n"); - } + /*" operation not supported on SCSI disks"*/ + if (is_scsi_hd) + bb_error_msg_and_die(bb_msg_op_not_supp,"SCSI"); } static void no_xt (void) { - if (is_xt_hd) { - bb_error_msg_and_die (" operation not supported on XT disks\n"); - } + if (is_xt_hd) + bb_error_msg_and_die(bb_msg_op_not_supp,"XT"); } static void on_off (unsigned int value) @@ -1492,19 +1675,20 @@ static void bus_state_value (unsigned int value) { const char *string; - switch (value) { - case BUSSTATE_ON: - string = " (on)\n"; - break; - case BUSSTATE_OFF: - string = " (off)\n"; - break; - case BUSSTATE_TRISTATE: - string = " (tristate)\n"; - break; - default: - string = " (unknown: %d)\n"; - break; + switch (value) + { + case BUSSTATE_ON: + string = " (on)\n"; + break; + case BUSSTATE_OFF: + string = " (off)\n"; + break; + case BUSSTATE_TRISTATE: + string = " (tristate)\n"; + break; + default: + string = " (unknown: %d)\n"; + break; } printf(string, value); } @@ -1514,33 +1698,43 @@ static void bus_state_value (unsigned int value) static void interpret_standby (unsigned int standby) { printf(" ("); - switch(standby) { - case 0: printf("off"); - break; - case 252: printf("21 minutes"); - break; - case 253: printf("vendor-specific"); - break; - case 254: printf("?reserved"); - break; - case 255: printf("21 minutes + 15 seconds"); - break; + switch(standby) + { + case 0: + printf("off"); + break; + case 252: + printf("21 minutes"); + break; + case 253: + printf("vendor-specific"); + break; + case 254: + printf("?reserved"); + break; + case 255: + printf("21 minutes + 15 seconds"); + break; default: - if (standby <= 240) { + if (standby <= 240) + { unsigned int secs = standby * 5; unsigned int mins = secs / 60; secs %= 60; - if (mins) printf("%u minutes", mins); - if (mins && secs) printf(" + "); - if (secs) printf("%u seconds", secs); - } else if (standby <= 251) { + if_printf(mins,"%u minutes", mins); + if_printf((mins && secs)," + "); + if_printf(secs,"%u seconds", secs); + } + else if (standby <= 251) + { unsigned int mins = (standby - 240) * 30; unsigned int hrs = mins / 60; mins %= 60; - if (hrs) printf("%u hours", hrs); - if (hrs && mins) printf(" + "); - if (mins) printf("%u minutes", mins); - } else + if_printf(hrs,"%u hours", hrs); + if_printf((hrs && mins)," + "); + if_printf(mins,"%u minutes", mins); + } + else printf("illegal value"); break; } @@ -1590,31 +1784,35 @@ static const struct xfermode_entry xfermode_table[] = { static int translate_xfermode(char * name) { - const struct xfermode_entry *tmp; - char *endptr; - int val = -1; + const struct xfermode_entry *tmp; + char *endptr; + int val = -1; + + for (tmp = xfermode_table; tmp->name != NULL; ++tmp) + { + if (!strcmp(name, tmp->name)) + return tmp->val; - for (tmp = xfermode_table; tmp->name != NULL; ++tmp) { - if (!strcmp(name, tmp->name)) - return tmp->val; - } + } - val = strtol(name, &endptr, 10); - if (*endptr == '\0') - return val; + val = strtol(name, &endptr, 10); + if (*endptr == '\0') + return val; - return -1; + return -1; } static void interpret_xfermode (unsigned int xfermode) { printf(" ("); switch(xfermode) { - case 0: printf("default PIO mode"); - break; - case 1: printf("default PIO mode, disable IORDY"); - break; + case 0: + printf("default PIO mode"); + break; + case 1: + printf("default PIO mode, disable IORDY"); + break; case 8: case 9: case 10: @@ -1622,8 +1820,9 @@ static void interpret_xfermode (unsigned int xfermode) case 12: case 13: case 14: - case 15: printf("PIO flow control mode%u", xfermode-8); - break; + case 15: + printf("PIO flow control mode%u", xfermode-8); + break; case 16: case 17: case 18: @@ -1631,8 +1830,9 @@ static void interpret_xfermode (unsigned int xfermode) case 20: case 21: case 22: - case 23: printf("singleword DMA mode%u", xfermode-16); - break; + case 23: + printf("singleword DMA mode%u", xfermode-16); + break; case 32: case 33: case 34: @@ -1640,8 +1840,9 @@ static void interpret_xfermode (unsigned int xfermode) case 36: case 37: case 38: - case 39: printf("multiword DMA mode%u", xfermode-32); - break; + case 39: + printf("multiword DMA mode%u", xfermode-32); + break; case 64: case 65: case 66: @@ -1649,11 +1850,12 @@ static void interpret_xfermode (unsigned int xfermode) case 68: case 69: case 70: - case 71: printf("UltraDMA mode%u", xfermode-64); - break; + case 71: + printf("UltraDMA mode%u", xfermode-64); + break; default: - printf("unknown, probably not valid"); - break; + printf("unknown, probably not valid"); + break; } printf(")\n"); } @@ -1678,280 +1880,260 @@ static void process_dev (char *devname) if (stat(devname,&stat_buf)) bb_perror_msg_and_die(devname); - switch(major(stat_buf.st_rdev)) { + switch(major(stat_buf.st_rdev)) + { #ifdef SCSI_DISK0_MAJOR - case (SCSI_DISK0_MAJOR): - case (SCSI_DISK1_MAJOR): - case (SCSI_DISK2_MAJOR): - case (SCSI_DISK3_MAJOR): - case (SCSI_DISK4_MAJOR): - case (SCSI_DISK5_MAJOR): - case (SCSI_DISK6_MAJOR): - case (SCSI_DISK7_MAJOR): + case (SCSI_DISK0_MAJOR): + case (SCSI_DISK1_MAJOR): + case (SCSI_DISK2_MAJOR): + case (SCSI_DISK3_MAJOR): + case (SCSI_DISK4_MAJOR): + case (SCSI_DISK5_MAJOR): + case (SCSI_DISK6_MAJOR): + case (SCSI_DISK7_MAJOR): #else - case (SCSI_DISK_MAJOR): + case (SCSI_DISK_MAJOR): #endif #ifdef MD_MAJOR - case (MD_MAJOR): + case (MD_MAJOR): #endif - case (VXVM_MAJOR): + case (VXVM_MAJOR): #ifdef LVM_BLK_MAJOR - case (LVM_BLK_MAJOR): + case (LVM_BLK_MAJOR): #endif - case (CCISS_MAJOR): - is_scsi_hd = 1; - break; + case (CCISS_MAJOR): + is_scsi_hd = 1; + break; #ifdef XT_DISK_MAJOR - case (XT_DISK_MAJOR): - is_xt_hd = 1; - break; + case (XT_DISK_MAJOR): + is_xt_hd = 1; + break; #endif - case IDE0_MAJOR: - case IDE1_MAJOR: + case IDE0_MAJOR: + case IDE1_MAJOR: #ifdef IDE2_MAJOR - case IDE2_MAJOR: + case IDE2_MAJOR: #endif #ifdef IDE3_MAJOR - case IDE3_MAJOR: + case IDE3_MAJOR: #endif #ifdef IDE4_MAJOR - case IDE4_MAJOR: + case IDE4_MAJOR: #endif #ifdef IDE5_MAJOR - case IDE5_MAJOR: + case IDE5_MAJOR: #endif #ifdef IDE6_MAJOR - case IDE6_MAJOR: + case IDE6_MAJOR: #endif #ifdef IDE7_MAJOR - case IDE7_MAJOR: + case IDE7_MAJOR: #endif #ifdef IDE8_MAJOR - case IDE8_MAJOR: + case IDE8_MAJOR: #endif #ifdef IDE9_MAJOR - case IDE9_MAJOR: + case IDE9_MAJOR: #endif - break; /* do nothing */ - default: - bb_error_msg_and_die("%s not supported by hdparm",devname); + break; /* do nothing */ + default: + bb_error_msg_and_die("%s not supported",devname); } - fd = open (devname, O_RDONLY|O_NONBLOCK); - if (fd < 0) - bb_perror_msg_and_die(devname); - if (!quiet) - printf("\n%s:\n", devname); + fd = bb_xopen (devname, O_RDONLY|O_NONBLOCK); + if_printf( (!quiet),"\n%s:\n", devname); - if (set_readahead) { - if (get_readahead) - printf(" setting fs readahead to %ld\n", readahead); - if (ioctl(fd, BLKRASET, readahead)) - bb_perror_msg(" BLKRASET failed"); + if (set_readahead) + { + if_printf(get_readahead," setting fs readahead to %ld\n", readahead); + bb_ioctl(fd, BLKRASET,(int *)readahead,"BLKRASET"); } #ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF - if (unregister_hwif) { + if (unregister_hwif) + { no_scsi(); printf(" attempting to unregister hwif#%u\n", hwif); - if (ioctl(fd, HDIO_UNREGISTER_HWIF, hwif)) - bb_perror_msg(" HDIO_UNREGISTER_HWIF failed"); + bb_ioctl(fd, HDIO_UNREGISTER_HWIF,(int *)hwif,"HDIO_UNREGISTER_HWIF"); } #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF - if (scan_hwif) { + if (scan_hwif) + { int args[3]; no_scsi(); printf(" attempting to scan hwif (0x%x, 0x%x, %u)\n", hwif_data, hwif_ctrl, hwif_irq); args[0] = hwif_data; args[1] = hwif_ctrl; args[2] = hwif_irq; - if (ioctl(fd, HDIO_SCAN_HWIF, args)) - bb_perror_msg(" HDIO_SCAN_HWIF failed"); + bb_ioctl(fd, HDIO_SCAN_HWIF, args, "HDIO_SCAN_HWIF"); } #endif - if (set_piomode) { + if (set_piomode) + { no_scsi(); no_xt(); - if (noisy_piomode) { + + if (noisy_piomode) + { + printf(" attempting to "); if (piomode == 255) - printf(" attempting to auto-tune PIO mode\n"); + printf("auto-tune PIO mode\n"); else if (piomode < 100) - printf(" attempting to set PIO mode to %d\n", piomode); + printf("set PIO mode to %d\n", piomode); else if (piomode < 200) - printf(" attempting to set MDMA mode to %d\n", (piomode-100)); + printf("set MDMA mode to %d\n", (piomode-100)); else - printf(" attempting to set UDMA mode to %d\n", (piomode-200)); + printf("set UDMA mode to %d\n", (piomode-200)); } - if (ioctl(fd, HDIO_SET_PIO_MODE, piomode)) - bb_perror_msg(" HDIO_SET_PIO_MODE failed"); + bb_ioctl(fd, HDIO_SET_PIO_MODE, (int *)piomode, "HDIO_SET_PIO_MODE"); } - if (set_io32bit) { + if (set_io32bit) + { no_scsi(); no_xt(); - if (get_io32bit) - printf(" setting 32-bit IO_support flag to %ld\n", io32bit); - if (ioctl(fd, HDIO_SET_32BIT, io32bit)) - bb_perror_msg(" HDIO_SET_32BIT failed"); + if_printf(get_io32bit," setting 32-bit IO_support flag to %ld\n", io32bit); + bb_ioctl(fd, HDIO_SET_32BIT, (int *)io32bit, "HDIO_SET_32BIT"); } - if (set_mult) { + if (set_mult) + { no_scsi(); no_xt(); - if (get_mult) - printf(" setting multcount to %ld\n", mult); - if (ioctl(fd, HDIO_SET_MULTCOUNT, mult)) - bb_perror_msg(" HDIO_SET_MULTCOUNT failed"); + if_printf(get_mult, " setting multcount to %ld\n", mult); + if(ioctl(fd, HDIO_SET_MULTCOUNT, mult)) + bb_error_msg("HDIO_SET_MULTCOUNT"); #ifndef HDIO_DRIVE_CMD - else force_operation = 1; + else + force_operation = 1; #endif } - if (set_readonly) { - if (get_readonly) { - printf(" setting readonly to %ld", readonly); - on_off(readonly); - } - if (ioctl(fd, BLKROSET, &readonly)) - bb_perror_msg(" BLKROSET failed"); + if (set_readonly) + { + if_printf_on_off(get_readonly," setting readonly to %ld", readonly); + bb_ioctl(fd, BLKROSET, &readonly, "BLKROSET"); } - if (set_unmask) { + if (set_unmask) + { no_scsi(); no_xt(); - if (get_unmask) { - printf(" setting unmaskirq to %ld", unmask); - on_off(unmask); - } - if (ioctl(fd, HDIO_SET_UNMASKINTR, unmask)) - bb_perror_msg(" HDIO_SET_UNMASKINTR failed"); + if_printf_on_off(get_unmask," setting unmaskirq to %ld", unmask); + bb_ioctl(fd, HDIO_SET_UNMASKINTR, (int *)unmask, "HDIO_SET_UNMASKINTR"); } #ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA - if (set_dma) { + if (set_dma) + { no_scsi(); - if (get_dma) { - printf(" setting using_dma to %ld", dma); - on_off(dma); - } - if (ioctl(fd, HDIO_SET_DMA, dma)) - bb_perror_msg(" HDIO_SET_DMA failed"); + if_printf_on_off(get_dma," setting using_dma to %ld", dma); + bb_ioctl(fd, HDIO_SET_DMA, (int *)dma, "HDIO_SET_DMA"); } #endif /* CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA */ - if (set_dma_q) { + if (set_dma_q) + { no_scsi(); - if (get_dma_q) { - printf(" setting DMA queue_depth to %ld", dma_q); - on_off(dma_q); - } - if (ioctl(fd, HDIO_SET_QDMA, dma_q)) - bb_perror_msg(" HDIO_SET_QDMA failed"); + if_printf_on_off(get_dma_q," setting DMA queue_depth to %ld", dma_q); + bb_ioctl(fd, HDIO_SET_QDMA, (int *)dma_q, "HDIO_SET_QDMA"); } - if (set_nowerr) { + if (set_nowerr) + { no_scsi(); no_xt(); - if (get_nowerr) { - printf(" setting nowerr to %ld", nowerr); - on_off(nowerr); - } - if (ioctl(fd, HDIO_SET_NOWERR, nowerr)) - bb_perror_msg(" HDIO_SET_NOWERR failed"); + if_printf_on_off(get_nowerr," setting nowerr to %ld", nowerr); + bb_ioctl(fd, HDIO_SET_NOWERR, (int *)nowerr,"HDIO_SET_NOWERR"); } - if (set_keep) { + if (set_keep) + { no_scsi(); no_xt(); - if (get_keep) { - printf(" setting keep_settings to %ld", keep); - on_off(keep); - } - if (ioctl(fd, HDIO_SET_KEEPSETTINGS, keep)) - bb_perror_msg(" HDIO_SET_KEEPSETTINGS failed"); + if_printf_on_off(get_keep," setting keep_settings to %ld", keep); + bb_ioctl(fd, HDIO_SET_KEEPSETTINGS, (int *)keep,"HDIO_SET_KEEPSETTINGS"); } #ifdef HDIO_DRIVE_CMD - if (set_doorlock) { + if (set_doorlock) + { unsigned char args[4] = {0,0,0,0}; no_scsi(); no_xt(); + args[0] = doorlock ? WIN_DOORLOCK : WIN_DOORUNLOCK; - if (get_doorlock) { - printf(" setting drive doorlock to %ld", doorlock); - on_off(doorlock); - } - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(doorlock) failed"); + if_printf_on_off(get_doorlock," setting drive doorlock to %ld", doorlock); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD(doorlock)"); } - if (set_dkeep) { + if (set_dkeep) + { /* lock/unlock the drive's "feature" settings */ unsigned char args[4] = {WIN_SETFEATURES,0,0,0}; no_scsi(); no_xt(); - if (get_dkeep) { - printf(" setting drive keep features to %ld", dkeep); - on_off(dkeep); - } + + if_printf_on_off(get_dkeep," setting drive keep features to %ld", dkeep); args[2] = dkeep ? 0x66 : 0xcc; - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(keepsettings) failed"); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD(keepsettings)"); } - if (set_defects) { + if (set_defects) + { unsigned char args[4] = {WIN_SETFEATURES,0,0x04,0}; no_scsi(); args[2] = defects ? 0x04 : 0x84; - if (get_defects) - printf(" setting drive defect-mgmt to %ld\n", defects); - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(defectmgmt) failed"); + if_printf(get_defects," setting drive defect-mgmt to %ld\n", defects); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD(defectmgmt)"); } - if (set_prefetch) { + if (set_prefetch) + { unsigned char args[4] = {WIN_SETFEATURES,0,0xab,0}; no_scsi(); no_xt(); + args[1] = prefetch; - if (get_prefetch) - printf(" setting drive prefetch to %ld\n", prefetch); - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(setprefetch) failed"); + if_printf(get_prefetch," setting drive prefetch to %ld\n", prefetch); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(setprefetch)"); } - if (set_xfermode) { + if (set_xfermode) + { unsigned char args[4] = {WIN_SETFEATURES,0,3,0}; no_scsi(); no_xt(); + args[1] = xfermode_requested; - if (get_xfermode) { + if (get_xfermode) + { printf(" setting xfermode to %d", xfermode_requested); interpret_xfermode(xfermode_requested); } - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(setxfermode) failed"); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD(setxfermode)"); } - if (set_lookahead) { + if (set_lookahead) + { unsigned char args[4] = {WIN_SETFEATURES,0,0,0}; no_scsi(); no_xt(); + args[2] = lookahead ? 0xaa : 0x55; - if (get_lookahead) { - printf(" setting drive read-lookahead to %ld", lookahead); - on_off(lookahead); - } - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(setreadahead) failed"); + if_printf_on_off(get_lookahead," setting drive read-lookahead to %ld", lookahead); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(setreadahead)"); } - if (set_apmmode) { + if (set_apmmode) + { unsigned char args[4] = {WIN_SETFEATURES,0,0,0}; no_scsi(); - if (apmmode<1) apmmode=1; - if (apmmode>255) apmmode=255; - if (get_apmmode) - printf(" setting Advanced Power Management level to"); - if (apmmode==255) { + check_if_min_and_set_val(apmmode,1); + check_if_maj_and_set_val(apmmode,255); + if_printf(get_apmmode," setting APM level to"); + if (apmmode==255) + { /* disable Advanced Power Management */ - args[2] = 0x85; /* feature register */ - if (get_apmmode) printf(" disabled\n"); - } else { + args[2] = 0x85; /* feature register */ + if_printf(get_apmmode," disabled\n"); + } + else + { /* set Advanced Power Management mode */ - args[2] = 0x05; /* feature register */ + args[2] = 0x05; /* feature register */ args[1] = apmmode; /* sector count register */ - if (get_apmmode) printf(" 0x%02lX (%ld)\n",apmmode,apmmode); - } - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD failed"); + if_printf(get_apmmode," 0x%02lX (%ld)\n",apmmode,apmmode); + } + bb_ioctl(fd, HDIO_DRIVE_CMD, &args,"HDIO_DRIVE_CMD"); } - if (set_wcache) { + if (set_wcache) + { #ifdef DO_FLUSHCACHE #ifndef WIN_FLUSHCACHE #define WIN_FLUSHCACHE 0xe7 @@ -1962,22 +2144,19 @@ static void process_dev (char *devname) no_scsi(); no_xt(); args[2] = wcache ? 0x02 : 0x82; - if (get_wcache) { - printf(" setting drive write-caching to %ld", wcache); - on_off(wcache); - } + if_printf_on_off(get_wcache," setting drive write-caching to %ld", wcache); #ifdef DO_FLUSHCACHE if (!wcache && ioctl(fd, HDIO_DRIVE_CMD, &flushcache)) - bb_perror_msg (" HDIO_DRIVE_CMD(flushcache) failed"); + bb_error_msg ("HDIO_DRIVE_CMD(flushcache)"); #endif /* DO_FLUSHCACHE */ - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(setcache) failed"); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(setcache)"); #ifdef DO_FLUSHCACHE if (!wcache && ioctl(fd, HDIO_DRIVE_CMD, &flushcache)) - bb_perror_msg (" HDIO_DRIVE_CMD(flushcache) failed"); + bb_error_msg ("HDIO_DRIVE_CMD(flushcache)"); #endif /* DO_FLUSHCACHE */ } - if (set_standbynow) { + if (set_standbynow) + { #ifndef WIN_STANDBYNOW1 #define WIN_STANDBYNOW1 0xE0 #endif @@ -1987,13 +2166,13 @@ static void process_dev (char *devname) unsigned char args1[4] = {WIN_STANDBYNOW1,0,0,0}; unsigned char args2[4] = {WIN_STANDBYNOW2,0,0,0}; no_scsi(); - if (get_standbynow) - printf(" issuing standby command\n"); + if_printf(get_standbynow," issuing standby command\n"); if (ioctl(fd, HDIO_DRIVE_CMD, &args1) && ioctl(fd, HDIO_DRIVE_CMD, &args2)) - bb_perror_msg(" HDIO_DRIVE_CMD(standby) failed"); + bb_error_msg("HDIO_DRIVE_CMD(standby)"); } - if (set_sleepnow) { + if (set_sleepnow) + { #ifndef WIN_SLEEPNOW1 #define WIN_SLEEPNOW1 0xE6 #endif @@ -2003,93 +2182,106 @@ static void process_dev (char *devname) unsigned char args1[4] = {WIN_SLEEPNOW1,0,0,0}; unsigned char args2[4] = {WIN_SLEEPNOW2,0,0,0}; no_scsi(); - if (get_sleepnow) - printf(" issuing sleep command\n"); + if_printf(get_sleepnow," issuing sleep command\n"); if (ioctl(fd, HDIO_DRIVE_CMD, &args1) && ioctl(fd, HDIO_DRIVE_CMD, &args2)) - bb_perror_msg(" HDIO_DRIVE_CMD(sleep) failed"); + bb_error_msg("HDIO_DRIVE_CMD(sleep)"); } - if (set_seagate) { + if (set_seagate) + { unsigned char args[4] = {0xfb,0,0,0}; no_scsi(); no_xt(); - if (get_seagate) - printf(" disabling Seagate auto powersaving mode\n"); - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(seagatepwrsave) failed"); + if_printf(get_seagate," disabling Seagate auto powersaving mode\n"); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(seagatepwrsave)"); } - if (set_standby) { + if (set_standby) + { unsigned char args[4] = {WIN_SETIDLE1,standby_requested,0,0}; no_scsi(); no_xt(); - if (get_standby) { + if (get_standby) + { printf(" setting standby to %lu", standby_requested); interpret_standby(standby_requested); } - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) - bb_perror_msg(" HDIO_DRIVE_CMD(setidle1) failed"); + bb_ioctl(fd, HDIO_DRIVE_CMD, &args, "HDIO_DRIVE_CMD(setidle1)"); } #else /* HDIO_DRIVE_CMD */ - if (force_operation) { + if (force_operation) + { char buf[512]; flush_buffer_cache(fd); if (-1 == read(fd, buf, sizeof(buf))) - bb_perror_msg(" access failed"); + bb_error_msg("access failed"); } #endif /* HDIO_DRIVE_CMD */ if (!flagcount) verbose = 1; - if ((verbose && !is_scsi_hd && !is_xt_hd) || get_mult || get_identity) { + if ((verbose && !is_scsi_hd && !is_xt_hd) || get_mult || get_identity) + { no_scsi(); multcount = -1; - if (ioctl(fd, HDIO_GET_MULTCOUNT, &multcount)) { + if (ioctl(fd, HDIO_GET_MULTCOUNT, &multcount)) + { if ((verbose && !is_xt_hd) || get_mult) - bb_perror_msg(" HDIO_GET_MULTCOUNT failed"); - } else if (verbose | get_mult) { + bb_error_msg("HDIO_GET_MULTCOUNT"); + } + else if (verbose | get_mult) + { printf(" multcount = %2ld", multcount); on_off(multcount); } } - if ((verbose && !is_scsi_hd && !is_xt_hd) || get_io32bit) { + if ((verbose && !is_scsi_hd && !is_xt_hd) || get_io32bit) + { no_scsi(); no_xt(); - if (ioctl(fd, HDIO_GET_32BIT, &parm)) - bb_perror_msg(" HDIO_GET_32BIT failed"); - else { + if(ioctl(fd, HDIO_GET_32BIT, &parm)) + bb_error_msg("HDIO_GET_32BIT"); + else + { printf(" IO_support =%3ld (", parm); - switch (parm) { - case 0: printf("default "); - case 2: printf("16-bit)\n"); + switch (parm) + { + case 0: + printf("default "); + case 2: + printf("16-bit)\n"); break; - case 1: printf("32-bit)\n"); + case 1: + printf("32-bit)\n"); break; - case 3: printf("32-bit w/sync)\n"); + case 3: + printf("32-bit w/sync)\n"); break; - case 8: printf("Request-Queue-Bypass)\n"); + case 8: + printf("Request-Queue-Bypass)\n"); break; - default:printf("\?\?\?)\n"); + default: + printf("\?\?\?)\n"); + /*esac*/ } } } - if ((verbose && !is_scsi_hd && !is_xt_hd) || get_unmask) { + if ((verbose && !is_scsi_hd && !is_xt_hd) || get_unmask) + { no_scsi(); no_xt(); - if (ioctl(fd, HDIO_GET_UNMASKINTR, &parm)) - bb_perror_msg(" HDIO_GET_UNMASKINTR failed"); - else { - printf(" unmaskirq = %2ld", parm); - on_off(parm); - } + bb_ioctl_on_off(fd, HDIO_GET_UNMASKINTR,(unsigned long *)parm, + "HDIO_GET_UNMASKINTR"," unmaskirq = %2ld"); } + #ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA if ((verbose && !is_scsi_hd) || get_dma) { no_scsi(); - if (ioctl(fd, HDIO_GET_DMA, &parm)) - bb_perror_msg(" HDIO_GET_DMA failed"); - else { + if(ioctl(fd, HDIO_GET_DMA, &parm)) + bb_error_msg("HDIO_GET_DMA"); + else + { printf(" using_dma = %2ld", parm); if (parm == 8) printf(" (DMA-Assisted-PIO)\n"); @@ -2098,53 +2290,39 @@ static void process_dev (char *devname) } } #endif - if (get_dma_q) { + if (get_dma_q) + { no_scsi(); - if(ioctl(fd, HDIO_GET_QDMA, &parm)) { - bb_perror_msg(" HDIO_GET_QDMA failed"); - } else { - printf(" queue_depth = %2ld", parm); - on_off(parm); - } + bb_ioctl_on_off (fd, HDIO_GET_QDMA,(unsigned long *)parm, + "HDIO_GET_QDMA"," queue_depth = %2ld"); } - if ((verbose && !is_scsi_hd && !is_xt_hd) || get_keep) { + if ((verbose && !is_scsi_hd && !is_xt_hd) || get_keep) + { no_scsi(); no_xt(); - if (ioctl(fd, HDIO_GET_KEEPSETTINGS, &parm)) - bb_perror_msg(" HDIO_GET_KEEPSETTINGS failed"); - else { - printf(" keepsettings = %2ld", parm); - on_off(parm); - } + bb_ioctl_on_off (fd, HDIO_GET_KEEPSETTINGS,(unsigned long *)parm, + "HDIO_GET_KEEPSETTINGS"," keepsettings = %2ld"); } - if (get_nowerr) { + if (get_nowerr) + { no_scsi(); no_xt(); - if (ioctl(fd, HDIO_GET_NOWERR, &parm)) - bb_perror_msg(" HDIO_GET_NOWERR failed"); - else { - printf(" nowerr = %2ld", parm); - on_off(parm); - } + bb_ioctl_on_off (fd, HDIO_GET_NOWERR,(unsigned long *)&parm, + " HDIO_GET_NOWERR"," nowerr = %2ld"); } - if (verbose || get_readonly) { - if (ioctl(fd, BLKROGET, &parm)) - bb_perror_msg(" BLKROGET failed"); - else { - printf(" readonly = %2ld", parm); - on_off(parm); - } + if (verbose || get_readonly) + { + bb_ioctl_on_off(fd, BLKROGET,(unsigned long *)parm, + " BLKROGET"," readonly = %2ld"); } - if ((verbose && !is_scsi_hd) || get_readahead) { - if (ioctl(fd, BLKRAGET, &parm)) - bb_perror_msg(" BLKRAGET failed"); - else { - printf(" readahead = %2ld", parm); - on_off(parm); - } + if ((verbose && !is_scsi_hd) || get_readahead) + { + bb_ioctl_on_off (fd, BLKRAGET, (unsigned long *) parm, + " BLKRAGET"," readahead = %2ld"); } - if (verbose || get_geom) { + if (verbose || get_geom) + { static const char msg[] = " geometry = %u/%u/%u, sectors = %ld, start = %ld\n"; static struct hd_geometry g; #ifdef HDIO_GETGEO_BIG @@ -2152,17 +2330,19 @@ static void process_dev (char *devname) #endif if (ioctl(fd, BLKGETSIZE, &parm)) - bb_perror_msg(" BLKGETSIZE failed"); + bb_error_msg("BLKGETSIZE"); #ifdef HDIO_GETGEO_BIG else if (!ioctl(fd, HDIO_GETGEO_BIG, &bg)) printf(msg, bg.cylinders, bg.heads, bg.sectors, parm, bg.start); #endif else if (ioctl(fd, HDIO_GETGEO, &g)) - bb_perror_msg(" HDIO_GETGEO failed"); - else printf(msg, g.cylinders, g.heads, g.sectors, parm, g.start); + bb_error_msg("HDIO_GETGEO"); + else + printf(msg, g.cylinders, g.heads, g.sectors, parm, g.start); } #ifdef HDIO_DRIVE_CMD - if (get_powermode) { + if (get_powermode) + { #ifndef WIN_CHECKPOWERMODE1 #define WIN_CHECKPOWERMODE1 0xE5 #endif @@ -2173,133 +2353,125 @@ static void process_dev (char *devname) const char *state; no_scsi(); if (ioctl(fd, HDIO_DRIVE_CMD, &args) - && (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */ - && ioctl(fd, HDIO_DRIVE_CMD, &args)) { + && (args[0] = WIN_CHECKPOWERMODE2) /* try again with 0x98 */ + && ioctl(fd, HDIO_DRIVE_CMD, &args)) + { if (errno != EIO || args[0] != 0 || args[1] != 0) state = "unknown"; else state = "sleeping"; - } else { - state = (args[2] == 255) ? "active/idle" : "standby"; } + else + state = (args[2] == 255) ? "active/idle" : "standby"; + printf(" drive state is: %s\n", state); } #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET - if (perform_reset) { + if (perform_reset) + { no_scsi(); no_xt(); - if (ioctl(fd, HDIO_DRIVE_RESET, NULL)) - bb_perror_msg(" HDIO_DRIVE_RESET failed"); + bb_ioctl(fd, HDIO_DRIVE_RESET, NULL, "HDIO_DRIVE_RESET"); } #endif /* CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET */ #ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF - if (perform_tristate) { + if (perform_tristate) + { unsigned char args[4] = {0,tristate,0,0}; no_scsi(); no_xt(); - if (ioctl(fd, HDIO_TRISTATE_HWIF, &args)) - bb_perror_msg(" HDIO_TRISTATE_HWIF failed"); + bb_ioctl(fd, HDIO_TRISTATE_HWIF, &args, "HDIO_TRISTATE_HWIF"); } #endif /* CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF */ #ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY - if (get_identity) { + if (get_identity) + { static struct hd_driveid id; no_scsi(); no_xt(); - if (!ioctl(fd, HDIO_GET_IDENTITY, &id)) { - if (multcount != -1) { + if (!ioctl(fd, HDIO_GET_IDENTITY, &id)) + { + if (multcount != -1) + { id.multsect = multcount; id.multsect_valid |= 1; - } else + } + else id.multsect_valid &= ~1; dump_identity(&id); - } else if (errno == -ENOMSG) + } + else if (errno == -ENOMSG) printf(" no identification info available\n"); else - bb_perror_msg(" HDIO_GET_IDENTITY failed"); + bb_error_msg("HDIO_GET_IDENTITY"); } - if (get_IDentity) { + + if (get_IDentity) + { unsigned char args[4+512] = {WIN_IDENTIFY,0,0,1,}; unsigned i; + no_scsi(); no_xt(); - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) { + + if (ioctl(fd, HDIO_DRIVE_CMD, &args)) + { args[0] = WIN_PIDENTIFY; - if (ioctl(fd, HDIO_DRIVE_CMD, &args)) { - bb_perror_msg(" HDIO_DRIVE_CMD(identify) failed"); + if (ioctl(fd, HDIO_DRIVE_CMD, &args)) + { + bb_error_msg("HDIO_DRIVE_CMD(identify)"); goto identify_abort; } } - for(i=0; i<(sizeof args)/2; i+=2) { + for(i=0; i<(sizeof args)/2; i+=2) __le16_to_cpus((uint16_t *)(&args[i])); - } + identify((void *)&args[4], NULL); -identify_abort: ; +identify_abort: + /* VOID */; } #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF - if (set_busstate) { + if (set_busstate) + { no_scsi(); - if (get_busstate) { + if (get_busstate) + { printf(" setting bus state to %d", busstate); bus_state_value(busstate); } - if (ioctl(fd, HDIO_SET_BUSSTATE, busstate)) - bb_perror_msg(" HDIO_SET_BUSSTATE failed"); + bb_ioctl(fd, HDIO_SET_BUSSTATE, (int *)busstate, "HDIO_SET_BUSSTATE"); } #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF - if (get_busstate) { + if (get_busstate) + { no_scsi(); if (ioctl(fd, HDIO_GET_BUSSTATE, &parm)) - bb_perror_msg(" HDIO_GET_BUSSTATE failed"); - else { + bb_error_msg("HDIO_GET_BUSSTATE"); + else + { printf(" busstate = %2ld", parm); bus_state_value(parm); } } #endif - if (reread_partn) { - if (ioctl(fd, BLKRRPART, NULL)) { - bb_perror_msg(" BLKRRPART failed"); - } - } + if (reread_partn) + bb_ioctl(fd, BLKRRPART, NULL, "BLKRRPART"); + if (do_ctimings) - time_cache (fd); + do_time(0,fd); /*time cache */ if (do_timings) - time_device (fd); + do_time(1,fd); /*time device */ if (do_flush) flush_buffer_cache (fd); close (fd); } -#define GET_NUMBER(flag,num) num = 0; \ - if (!*p && argc && isdigit(**argv)) \ - p = *argv++, --argc; \ - while (isdigit(*p)) { \ - flag = 1; \ - num = (num * 10) + (*p++ - '0'); \ - } - -#define GET_STRING(flag, num) tmpstr = name; \ - tmpstr[0] = '\0'; \ - if (!*p && argc && isalnum(**argv)) \ - p = *argv++, --argc; \ - while (isalnum(*p) && (tmpstr - name) < 31) { \ - tmpstr[0] = *p++; \ - tmpstr[1] = '\0'; \ - ++tmpstr; \ - } \ - num = translate_xfermode(name); \ - if (num == -1) \ - flag = 0; \ - else \ - flag = 1; - #ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY static int fromhex (unsigned char c) { @@ -2318,7 +2490,8 @@ static int identify_from_stdin (void) if (count != 1280) bb_error_msg_and_die("read(1280 bytes) failed (rc=%d)", count); - for (i = 0; count >= 4; ++i) { + for (i = 0; count >= 4; ++i) + { sbuf[i] = (fromhex(b[0]) << 12) | (fromhex(b[1]) << 8) | (fromhex(b[2]) << 4) | fromhex(b[3]); __le16_to_cpus((uint16_t *)(&sbuf[i])); b += 5; @@ -2332,29 +2505,39 @@ static int identify_from_stdin (void) /* our main() routine: */ int hdparm_main(int argc, char **argv) { + const char * const bb_msg_missing_value ="missing value"; char c, *p; char *tmpstr; char name[32]; - int neg; + /*int neg;*/ ++argv; if (!--argc) bb_show_usage(); - while (argc--) { + + while (argc--) + { #ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY - if (!strcmp("-Istdin", *argv)) { + if (!strcmp("-Istdin", *argv)) + { exit(identify_from_stdin()); } #endif p = *argv++; - if (*p == '-') { + if (*p == '-') + { if (!*++p) bb_show_usage(); - while ((c = *p++)) { + while ((c = *p++)) + { ++flagcount; - switch (c) { + switch (c) + { case 'V': - bb_error_msg_and_die("%s", VERSION); + /*bb_error_msg_and_die("%s", VERSION);*/ + /* We have to return 0 here and not 1 */ + printf("%s %s\n",bb_applet_name, VERSION); + exit(EXIT_SUCCESS); case 'v': verbose = 1; break; @@ -2379,138 +2562,169 @@ int hdparm_main(int argc, char **argv) case 'u': get_unmask = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - set_unmask = 1; - unmask = *p++ - '0'; - } + p = check_ptr(p,argc,argv); + if((set_unmask = set_flag(p,'1'))==1) + unmask = *p++ - '0'; break; #ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA case 'd': get_dma = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p >= '0' && *p <= '9') { - set_dma = 1; + p = check_ptr(p,argc,argv); + if((set_dma = set_flag(p,'9'))==1) dma = *p++ - '0'; - } break; #endif /* CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA */ case 'n': get_nowerr = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - set_nowerr = 1; - nowerr = *p++ - '0'; - } + p = check_ptr(p,argc,argv); + if((set_nowerr = set_flag(p,'1'))==1) + nowerr = *p++ - '0'; break; case 'p': noisy_piomode = noisy; noisy = 1; - GET_STRING(set_piomode,piomode); + p = check_ptr_v2(p,argc,argv); + tmpstr = name; + tmpstr[0] = '\0'; + while (isalnum(*p) && (tmpstr - name) < 31) + { + tmpstr[0] = *p++; + tmpstr[1] = '\0'; + ++tmpstr; + } + piomode = translate_xfermode(name); + if (piomode == -1) + set_piomode = 0; + else + set_piomode = 1; break; case 'r': get_readonly = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - set_readonly = 1; - readonly = *p++ - '0'; - } + p = check_ptr(p,argc,argv); + if((set_readonly = set_flag(p,'1'))==1) + readonly = *p++ - '0'; break; case 'm': get_mult = noisy; noisy = 1; - GET_NUMBER(set_mult,mult); + p = check_ptr(p,argc,argv); + while (isdigit(*p)) + { + set_mult = 1; + mult = (mult * 10) + (*p++ - '0'); + } break; case 'c': get_io32bit = noisy; noisy = 1; - GET_NUMBER(set_io32bit,io32bit); + p = check_ptr(p,argc,argv); + while (isdigit(*p)) + { + set_io32bit = 1; + io32bit = (io32bit * 10) + (*p++ - '0'); + } break; #ifdef HDIO_DRIVE_CMD case 'S': get_standby = noisy; noisy = 1; - GET_NUMBER(set_standby,standby_requested); + p = check_ptr(p,argc,argv); + while (isdigit(*p)) + { + set_standby = 1; + standby_requested = (standby_requested * 10) + (*p++ - '0'); + } if (!set_standby) - bb_error_msg("-S: missing value"); + bb_error_msg("-S: %s", bb_msg_missing_value); break; case 'D': get_defects = noisy; noisy = 1; - GET_NUMBER(set_defects,defects); + p = check_ptr(p,argc,argv); + while (isdigit(*p)) + { + set_defects = 1; + defects = (defects * 10) + (*p++ - '0'); + } if (!set_defects) - bb_error_msg("-D: missing value"); + bb_error_msg("-D: %s", bb_msg_missing_value); break; case 'P': get_prefetch = noisy; noisy = 1; - GET_NUMBER(set_prefetch,prefetch); + p = check_ptr(p,argc,argv); + while (isdigit(*p)) + { + set_prefetch = 1; + prefetch = (prefetch * 10) + (*p++ - '0'); + } if (!set_prefetch) - bb_error_msg("-P: missing value"); + bb_error_msg("-P: %s", bb_msg_missing_value); break; case 'X': get_xfermode = noisy; noisy = 1; - GET_STRING(set_xfermode,xfermode_requested); + p = check_ptr_v2(p,argc,argv); + tmpstr = name; + tmpstr[0] = '\0'; + while (isalnum(*p) && (tmpstr - name) < 31) + { + tmpstr[0] = *p++; + tmpstr[1] = '\0'; + ++tmpstr; + } + xfermode_requested = translate_xfermode(name); + if (xfermode_requested == -1) + set_xfermode = 0; + else + set_xfermode = 1; if (!set_xfermode) - bb_error_msg("-X: missing value"); + bb_error_msg("-X: %s", bb_msg_missing_value); break; case 'K': get_dkeep = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - set_dkeep = 1; - dkeep = *p++ - '0'; - } else - bb_error_msg("-K: missing value (0/1)"); + p = check_ptr(p,argc,argv); + if((set_dkeep = set_flag(p,'1'))==1) + dkeep = *p++ - '0'; + else + bb_error_msg("-K: %s (0/1)", bb_msg_missing_value); break; case 'A': get_lookahead = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - set_lookahead = 1; - lookahead = *p++ - '0'; - } else - bb_error_msg("-A: missing value (0/1)"); + p = check_ptr(p,argc,argv); + if((set_lookahead = set_flag(p,'1'))==1) + lookahead = *p++ - '0'; + else + bb_error_msg("-A: %s (0/1)", bb_msg_missing_value); break; case 'L': get_doorlock = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - set_doorlock = 1; - doorlock = *p++ - '0'; - } else - bb_error_msg("-L: missing value (0/1)"); + p = check_ptr(p,argc,argv); + if((set_doorlock = set_flag(p,'1'))==1) + doorlock = *p++ - '0'; + else + bb_error_msg("-L: %s (0/1)", bb_msg_missing_value); break; case 'W': get_wcache = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - set_wcache = 1; - wcache = *p++ - '0'; - } else - bb_error_msg("-W: missing value (0/1)"); + p = check_ptr(p,argc,argv); + if((set_wcache = set_flag(p,'1'))==1) + wcache = *p++ - '0'; + else + bb_error_msg("-W: %s (0/1)", bb_msg_missing_value); break; case 'C': @@ -2543,21 +2757,15 @@ int hdparm_main(int argc, char **argv) case 'k': get_keep = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - set_keep = 1; - keep = *p++ - '0'; - } + p = check_ptr(p,argc,argv); + if((set_keep = set_flag(p,'1'))==1) + keep = *p++ - '0'; break; #ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF case 'U': - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - - if(! p) { - bb_error_msg_and_die("expected hwif_nr"); - } + p = check_ptr(p,argc,argv); + if(! p) + goto error; /* "expected hwif_nr" */ sscanf(p++, "%i", &hwif); @@ -2566,28 +2774,24 @@ int hdparm_main(int argc, char **argv) #endif /* CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF */ #ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF case 'R': - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - - if(! p) { - bb_error_msg_and_die("expected hwif_data"); - } + p = check_ptr(p,argc,argv); + if(! p) + goto error; /* "expected hwif_data" */ sscanf(p++, "%i", &hwif_data); if (argc && isdigit(**argv)) p = *argv++, --argc; - else { - bb_error_msg_and_die("expected hwif_ctrl"); - } + else + goto error; /* "expected hwif_ctrl" */ sscanf(p, "%i", &hwif_ctrl); if (argc && isdigit(**argv)) p = *argv++, --argc; - else { - bb_error_msg_and_die("expected hwif_irq"); - } + else +error: + bb_error_msg_and_die("expected hwif value"); /* "expected hwif_irq" */ sscanf(p, "%i", &hwif_irq); @@ -2599,10 +2803,16 @@ int hdparm_main(int argc, char **argv) case 'Q': get_dma_q = noisy; noisy = 1; - neg = 0; - GET_NUMBER(set_dma_q, dma_q); - if (neg) - dma_q = -dma_q; + /* neg = 0; */ + p = check_ptr(p,argc,argv); + while (isdigit(*p)) + { + set_dma_q = 1; + dma_q = (dma_q * 10) + (*p++ - '0'); + } + /* what is this for ? as neg = 0 (see above) it seems to do nothing */ + /*if (neg) + dma_q = -dma_q;*/ break; #ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET case 'w': @@ -2611,27 +2821,35 @@ int hdparm_main(int argc, char **argv) #endif /* CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET */ #ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF case 'x': - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - if (*p == '0' || *p == '1') { - perform_tristate = 1; - tristate = *p++ - '0'; - } else - bb_error_msg("-x: missing value (0/1)"); + p = check_ptr(p,argc,argv); + if((perform_tristate = set_flag(p,'1'))==1) + tristate = *p++ - '0'; + else + bb_error_msg("-x: %s (0/1)", bb_msg_missing_value); break; #endif /* CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF */ case 'a': get_readahead = noisy; noisy = 1; - GET_NUMBER(set_readahead,readahead); + p = check_ptr(p,argc,argv); + while (isdigit(*p)) + { + set_readahead = 1; + readahead = (readahead * 10) + (*p++ - '0'); + } break; case 'B': get_apmmode = noisy; noisy = 1; - GET_NUMBER(set_apmmode,apmmode); + p = check_ptr(p,argc,argv); + while (isdigit(*p)) + { + set_apmmode = 1; + apmmode = (io32bit * 10) + (*p++ - '0'); + } if (!set_apmmode) - printf("-B: missing value (1-255)"); + printf("-B: %s (1-255)", bb_msg_missing_value); break; case 't': do_timings = 1; @@ -2645,18 +2863,9 @@ int hdparm_main(int argc, char **argv) case 'b': get_busstate = noisy; noisy = 1; - if (!*p && argc && isdigit(**argv)) - p = *argv++, --argc; - switch (*p) { - case '0': - case '1': - case '2': - set_busstate = 1; - busstate = *p++ - '0'; - break; - default: - break; - } + p = check_ptr(p,argc,argv); + if((set_busstate = set_flag(p,'2'))==1) + busstate = *p++ - '0'; break; #endif case 'h': @@ -2666,9 +2875,9 @@ int hdparm_main(int argc, char **argv) } if (!argc) bb_show_usage(); - } else { - process_dev (p); } + else + process_dev (p); } return 0 ; } -- cgit v1.2.3