From b4f3d7f5948f94203687031a3cb0b123104a6516 Mon Sep 17 00:00:00 2001 From: Glenn L McGrath Date: Sat, 8 Feb 2003 23:11:19 +0000 Subject: Rewrite by Manuel Novoa III, very compact implimentation. --- networking/vconfig.c | 294 +++++++++++++++++++++++---------------------------- 1 file changed, 134 insertions(+), 160 deletions(-) (limited to 'networking/vconfig.c') diff --git a/networking/vconfig.c b/networking/vconfig.c index 0ad759e69..3bd9c3040 100644 --- a/networking/vconfig.c +++ b/networking/vconfig.c @@ -1,166 +1,140 @@ -#include -#include #include #include #include -#include #include +#include #include -#include #include -#include -#include -#include "busybox.h" - - - -int vconfig_main(int argc, char** argv) { - int fd; - struct vlan_ioctl_args if_request; - - char* cmd = NULL; - char* if_name = NULL; - unsigned int vid = 0; - unsigned int skb_priority; - unsigned short vlan_qos; - unsigned int nm_type = VLAN_NAME_TYPE_PLUS_VID; - - char* conf_file_name = "/proc/net/vlan/config"; - - memset(&if_request, 0, sizeof(struct vlan_ioctl_args)); - - if ((argc < 3) || (argc > 5)) { - error_msg_and_die("Expecting argc to be 3-5, inclusive. Was: %d\n",argc); - } - else { - cmd = argv[1]; - - if (strcasecmp(cmd, "set_name_type") == 0) { - if (strcasecmp(argv[2], "VLAN_PLUS_VID") == 0) { - nm_type = VLAN_NAME_TYPE_PLUS_VID; - } - else if (strcasecmp(argv[2], "VLAN_PLUS_VID_NO_PAD") == 0) { - nm_type = VLAN_NAME_TYPE_PLUS_VID_NO_PAD; - } - else if (strcasecmp(argv[2], "DEV_PLUS_VID") == 0) { - nm_type = VLAN_NAME_TYPE_RAW_PLUS_VID; - } - else if (strcasecmp(argv[2], "DEV_PLUS_VID_NO_PAD") == 0) { - nm_type = VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD; - } - else { - error_msg_and_die("Invalid name type.\n"); - } - if_request.u.name_type = nm_type; - } - else { - if_name = argv[2]; - if (strlen(if_name) > 15) { - error_msg_and_die("ERROR: if_name must be 15 characters or less.\n"); - } - strcpy(if_request.device1, if_name); - } - - if (argc == 4) { - vid = atoi(argv[3]); - if_request.u.VID = vid; - } - - if (argc == 5) { - skb_priority = atoi(argv[3]); - vlan_qos = atoi(argv[4]); - if_request.u.skb_priority = skb_priority; - if_request.vlan_qos = vlan_qos; - } - } - - // Open up the /proc/vlan/config - if ((fd = open(conf_file_name, O_RDONLY)) < 0) { - error_msg("WARNING: Could not open /proc/net/vlan/config. Maybe you need to load the 8021q module, or maybe you are not using PROCFS??\n"); - } - else { - close(fd); - } - - /* We use sockets now, instead of the file descriptor */ - if ((fd = socket(AF_INET, SOCK_STREAM, 0)) < 0) { - error_msg_and_die("FATAL: Couldn't open a socket..go figure!\n"); - } - - /* add */ - if (strcasecmp(cmd, "add") == 0) { - if_request.cmd = ADD_VLAN_CMD; - if (ioctl(fd, SIOCSIFVLAN, &if_request) < 0) { - error_msg("ERROR: trying to add VLAN #%u to IF -:%s:- error: %s\n", - vid, if_name, strerror(errno)); - } - else { - printf("Added VLAN with VID == %u to IF -:%s:-\n", vid, if_name); - if (vid == 1) { - error_msg("WARNING: VLAN 1 does not work with many switches,\nconsider another number if you have problems.\n"); - } - } - }//if - else if (strcasecmp(cmd, "rem") == 0) { - if_request.cmd = DEL_VLAN_CMD; - if (ioctl(fd, SIOCSIFVLAN, &if_request) < 0) { - error_msg("ERROR: trying to remove VLAN -:%s:- error: %s\n", - if_name, strerror(errno)); - } - else { - printf("Removed VLAN -:%s:-\n", if_name); - } - }//if - else if (strcasecmp(cmd, "set_egress_map") == 0) { - if_request.cmd = SET_VLAN_EGRESS_PRIORITY_CMD; - if (ioctl(fd, SIOCSIFVLAN, &if_request) < 0) { - error_msg("ERROR: trying to set egress map on device -:%s:- error: %s\n", - if_name, strerror(errno)); - } - else { - printf("Set egress mapping on device -:%s:- " - "Should be visible in /proc/net/vlan/%s\n", - if_name, if_name); - } - } - else if (strcasecmp(cmd, "set_ingress_map") == 0) { - if_request.cmd = SET_VLAN_INGRESS_PRIORITY_CMD; - if (ioctl(fd, SIOCSIFVLAN, &if_request) < 0) { - error_msg("ERROR: trying to set ingress map on device -:%s:- error: %s\n", - if_name, strerror(errno)); - } - else { - printf("Set ingress mapping on device -:%s:- " - "Should be visible in /proc/net/vlan/%s\n", - if_name, if_name); - } - } - else if (strcasecmp(cmd, "set_flag") == 0) { - if_request.cmd = SET_VLAN_FLAG_CMD; - if (ioctl(fd, SIOCSIFVLAN, &if_request) < 0) { - error_msg("ERROR: trying to set flag on device -:%s:- error: %s\n", - if_name, strerror(errno)); - } - else { - printf("Set flag on device -:%s:- " - "Should be visible in /proc/net/vlan/%s\n", - if_name, if_name); - } - } - else if (strcasecmp(cmd, "set_name_type") == 0) { - if_request.cmd = SET_VLAN_NAME_TYPE_CMD; - if (ioctl(fd, SIOCSIFVLAN, &if_request) < 0) { - error_msg("ERROR: trying to set name type for VLAN subsystem, error: %s\n", - strerror(errno)); - } - else { - printf("Set name-type for VLAN subsystem." - " Should be visible in /proc/net/vlan/config\n"); - } - } - else { - error_msg_and_die("Unknown command -:%s:-\n", cmd); - } - - return 0; -}/* main */ +#include +#include "busybox.h" + +#define VLAN_GROUP_ARRAY_LEN 4096 +#define SIOCSIFVLAN 0x8983 /* Set 802.1Q VLAN options */ + +/* This is rather specialized in that we're passing a 'char **' in + * order to avoid the pointer dereference multiple times in the + * actual calls below. */ +static unsigned long xstrtoul10(char **str, unsigned long max_val) +{ + char *endptr; + unsigned long r; + + r = strtoul(str[2], &endptr, 10); + if ((r > max_val) || (*endptr != 0)) { + show_usage(); + } + return r; +} + +/* On entry, table points to the length of the current string plus + * nul terminator plus data lenght for the subsequent entry. The + * return value is the last data entry for the matching string. */ +static const char *xfind_str(const char *table, const char *str) +{ + while (strcasecmp(str, table+1) != 0) { + if (!*(table += table[0])) { + show_usage(); + } + } + return table - 1; +} + +static const char cmds[] = { + 4, ADD_VLAN_CMD, 7, + 'a', 'd', 'd', 0, + 3, DEL_VLAN_CMD, 7, + 'r', 'e', 'm', 0, + 3, SET_VLAN_NAME_TYPE_CMD, 17, + 's', 'e', 't', '_', + 'n', 'a', 'm', 'e', '_', + 't', 'y', 'p', 'e', 0, + 4, SET_VLAN_FLAG_CMD, 12, + 's', 'e', 't', '_', + 'f', 'l', 'a', 'g', 0, + 5, SET_VLAN_EGRESS_PRIORITY_CMD, 18, + 's', 'e', 't', '_', + 'e', 'g', 'r', 'e', 's', 's', '_', + 'm', 'a', 'p', 0, + 5, SET_VLAN_INGRESS_PRIORITY_CMD, 16, + 's', 'e', 't', '_', + 'i', 'n', 'g', 'r', 'e', 's', 's', '_', + 'm', 'a', 'p', 0, +}; + +static const char name_types[] = { + VLAN_NAME_TYPE_PLUS_VID, 16, + 'V', 'L', 'A', 'N', + '_', 'P', 'L', 'U', 'S', '_', 'V', 'I', 'D', + 0, + VLAN_NAME_TYPE_PLUS_VID_NO_PAD, 22, + 'V', 'L', 'A', 'N', + '_', 'P', 'L', 'U', 'S', '_', 'V', 'I', 'D', + '_', 'N', 'O', '_', 'P', 'A', 'D', 0, + VLAN_NAME_TYPE_RAW_PLUS_VID, 15, + 'D', 'E', 'V', + '_', 'P', 'L', 'U', 'S', '_', 'V', 'I', 'D', + 0, + VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, 20, + 'D', 'E', 'V', + '_', 'P', 'L', 'U', 'S', '_', 'V', 'I', 'D', + '_', 'N', 'O', '_', 'P', 'A', 'D', 0, +}; + +static const char conf_file_name[] = "/proc/net/vlan/config"; + +int vconfig_main(int argc, char **argv) +{ + struct vlan_ioctl_args ifr; + const char *p; + int fd; + + if (argc < 3) { + show_usage(); + } + + /* Don't bother closing the filedes. It will be closed on cleanup. */ + if (open(conf_file_name, O_RDONLY) < 0) { /* Is 802.1q is present? */ + perror_msg_and_die("open %s", conf_file_name); + } + + memset(&ifr, 0, sizeof(struct vlan_ioctl_args)); + + ++argv; + p = xfind_str(cmds+2, *argv); + ifr.cmd = *p; + if (argc != p[-1]) { + show_usage(); + } + + if (ifr.cmd == SET_VLAN_NAME_TYPE_CMD) { /* set_name_type */ + ifr.u.name_type = *xfind_str(name_types+1, argv[1]); + } else { + if (strlen(argv[1]) >= IF_NAMESIZE) { + error_msg_and_die("if_name >= %d chars\n", IF_NAMESIZE); + } + strcpy(ifr.device1, argv[1]); + + /* I suppose one could try to combine some of the function calls below, + * since ifr.u.flag, ifr.u.VID, and ifr.u.skb_priority are all same-sized + * (unsigned) int members of a unions. But because of the range checking, + * doing so wouldn't save that much space and would also make maintainence + * more of a pain. */ + if (ifr.cmd == SET_VLAN_FLAG_CMD) { /* set_flag */ + ifr.u.flag = xstrtoul10(argv, 1); + } else if (ifr.cmd == ADD_VLAN_CMD) { /* add */ + ifr.u.VID = xstrtoul10(argv, VLAN_GROUP_ARRAY_LEN-1); + } else if (ifr.cmd != DEL_VLAN_CMD) { /* set_{egress|ingress}_map */ + ifr.u.skb_priority = xstrtoul10(argv, ULONG_MAX); + ifr.vlan_qos = xstrtoul10(argv+1, 7); + } + } + + if (((fd = socket(AF_INET, SOCK_STREAM, 0)) < 0) + || (ioctl(fd, SIOCSIFVLAN, &ifr) < 0) + ) { + perror_msg_and_die("socket or ioctl error for %s", *argv); + } + + return 0; +} + -- cgit v1.2.3