From a4d76ea1373a7cf06d3d0a3c8905646638e97a13 Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Sat, 27 Apr 2019 21:01:35 +0200 Subject: ash,hush: fix ulimit to be more bash-compat, closes 11791 function old new delta shell_builtin_ulimit 486 651 +165 limit_chars - 14 +14 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/0 up/down: 179/0) Total: 179 bytes Signed-off-by: Denys Vlasenko --- shell/shell_common.c | 265 +++++++++++++++++++++++++++++++++++---------------- 1 file changed, 181 insertions(+), 84 deletions(-) (limited to 'shell/shell_common.c') diff --git a/shell/shell_common.c b/shell/shell_common.c index f2bf5ab65..686c18f54 100644 --- a/shell/shell_common.c +++ b/shell/shell_common.c @@ -335,62 +335,93 @@ shell_builtin_read(struct builtin_read_params *params) struct limits { uint8_t cmd; /* RLIMIT_xxx fit into it */ uint8_t factor_shift; /* shift by to get rlim_{cur,max} values */ - char option; const char *name; }; static const struct limits limits_tbl[] = { -#ifdef RLIMIT_FSIZE - { RLIMIT_FSIZE, 9, 'f', "file size (blocks)" }, -#endif +/* No RLIMIT_FSIZE define guard since -f is the default limit and this must exist */ + { RLIMIT_FSIZE, 9, "file size (blocks)" }, // -f #ifdef RLIMIT_CPU - { RLIMIT_CPU, 0, 't', "cpu time (seconds)" }, + { RLIMIT_CPU, 0, "cpu time (seconds)" }, // -t #endif #ifdef RLIMIT_DATA - { RLIMIT_DATA, 10, 'd', "data seg size (kb)" }, + { RLIMIT_DATA, 10, "data seg size (kb)" }, // -d #endif #ifdef RLIMIT_STACK - { RLIMIT_STACK, 10, 's', "stack size (kb)" }, + { RLIMIT_STACK, 10, "stack size (kb)" }, // -s #endif #ifdef RLIMIT_CORE - { RLIMIT_CORE, 9, 'c', "core file size (blocks)" }, + { RLIMIT_CORE, 9, "core file size (blocks)" }, // -c #endif #ifdef RLIMIT_RSS - { RLIMIT_RSS, 10, 'm', "resident set size (kb)" }, + { RLIMIT_RSS, 10, "resident set size (kb)" }, // -m #endif #ifdef RLIMIT_MEMLOCK - { RLIMIT_MEMLOCK, 10, 'l', "locked memory (kb)" }, + { RLIMIT_MEMLOCK, 10, "locked memory (kb)" }, // -l #endif #ifdef RLIMIT_NPROC - { RLIMIT_NPROC, 0, 'p', "processes" }, + { RLIMIT_NPROC, 0, "processes" }, // -p #endif #ifdef RLIMIT_NOFILE - { RLIMIT_NOFILE, 0, 'n', "file descriptors" }, + { RLIMIT_NOFILE, 0, "file descriptors" }, // -n #endif #ifdef RLIMIT_AS - { RLIMIT_AS, 10, 'v', "address space (kb)" }, + { RLIMIT_AS, 10, "address space (kb)" }, // -v #endif #ifdef RLIMIT_LOCKS - { RLIMIT_LOCKS, 0, 'w', "locks" }, + { RLIMIT_LOCKS, 0, "locks" }, // -w #endif #ifdef RLIMIT_NICE - { RLIMIT_NICE, 0, 'e', "scheduling priority" }, + { RLIMIT_NICE, 0, "scheduling priority" }, // -e #endif #ifdef RLIMIT_RTPRIO - { RLIMIT_RTPRIO, 0, 'r', "real-time priority" }, + { RLIMIT_RTPRIO, 0, "real-time priority" }, // -r #endif }; -enum { - OPT_hard = (1 << 0), - OPT_soft = (1 << 1), -}; +static const char limit_chars[] ALIGN1 = + "f" +#ifdef RLIMIT_CPU + "t" +#endif +#ifdef RLIMIT_DATA + "d" +#endif +#ifdef RLIMIT_STACK + "s" +#endif +#ifdef RLIMIT_CORE + "c" +#endif +#ifdef RLIMIT_RSS + "m" +#endif +#ifdef RLIMIT_MEMLOCK + "l" +#endif +#ifdef RLIMIT_NPROC + "p" +#endif +#ifdef RLIMIT_NOFILE + "n" +#endif +#ifdef RLIMIT_AS + "v" +#endif +#ifdef RLIMIT_LOCKS + "w" +#endif +#ifdef RLIMIT_NICE + "e" +#endif +#ifdef RLIMIT_RTPRIO + "r" +#endif +; /* "-": treat args as parameters of option with ASCII code 1 */ static const char ulimit_opt_string[] ALIGN1 = "-HSa" -#ifdef RLIMIT_FSIZE "f::" -#endif #ifdef RLIMIT_CPU "t::" #endif @@ -429,13 +460,19 @@ static const char ulimit_opt_string[] ALIGN1 = "-HSa" #endif ; +enum { + OPT_hard = (1 << 0), + OPT_soft = (1 << 1), + OPT_all = (1 << 2), +}; + static void printlim(unsigned opts, const struct rlimit *limit, const struct limits *l) { rlim_t val; val = limit->rlim_max; - if (!(opts & OPT_hard)) + if (opts & OPT_soft) val = limit->rlim_cur; if (val == RLIM_INFINITY) @@ -449,8 +486,11 @@ static void printlim(unsigned opts, const struct rlimit *limit, int FAST_FUNC shell_builtin_ulimit(char **argv) { + struct rlimit limit; + unsigned opt_cnt; unsigned opts; unsigned argc; + unsigned i; /* We can't use getopt32: need to handle commands like * ulimit 123 -c2 -l 456 @@ -461,12 +501,48 @@ shell_builtin_ulimit(char **argv) */ GETOPT_RESET(); +// bash 4.4.23: +// +// -H and/or -S change meaning even of options *before* them: ulimit -f 2000 -H +// sets hard limit, ulimit -a -H prints hard limits. +// +// -a is equivalent for requesting all limits to be shown. +// +// If -a is specified, attempts to set limits are ignored: +// ulimit -m 1000; ulimit -m 2000 -a +// shows 1000, not 2000. HOWEVER, *implicit* -f form "ulimit 2000 -a" +// DOES set -f limit [we don't implement this quirk], "ulimit -a 2000" does not. +// Options are still parsed: ulimit -az complains about unknown -z opt. +// +// -a is not cumulative: "ulimit -a -a" = "ulimit -a -f -m" = "ulimit -a" +// +// -HSa can be combined in one argument and with one other option (example: -Sm), +// but other options can't: limit value is an optional argument, +// thus "-mf" means "-m f", f is the parameter of -m. +// +// Limit can be set and then printed: ulimit -m 2000 -m +// If set more than once, they are set and printed in order: +// try ulimit -m -m 1000 -m -m 2000 -m -m 3000 -m +// +// Limits are shown in the order of options given: +// ulimit -m -f is not the same as ulimit -f -m. +// +// If both -S and -H are given, show soft limit. +// +// Short printout (limit value only) is printed only if just one option +// is given: ulimit -m. ulimit -f -m prints verbose lines. +// ulimit -f -f prints same verbose line twice. +// ulimit -m 10000 -f prints verbose line for -f. + argc = string_array_len(argv); + /* First pass over options: detect -H/-S/-a status, + * and "bare ulimit" and "only one option" cases + * by counting other opts. + */ + opt_cnt = 0; opts = 0; while (1) { - struct rlimit limit; - const struct limits *l; int opt_char = getopt(argc, argv, ulimit_opt_string); if (opt_char == -1) @@ -479,72 +555,93 @@ shell_builtin_ulimit(char **argv) opts |= OPT_soft; continue; } - if (opt_char == 'a') { - for (l = limits_tbl; l != &limits_tbl[ARRAY_SIZE(limits_tbl)]; l++) { - getrlimit(l->cmd, &limit); - printf("-%c: %-30s ", l->option, l->name); - printlim(opts, &limit, l); - } + opts |= OPT_all; continue; } + if (opt_char == '?') { + /* bad option. getopt already complained. */ + return EXIT_FAILURE; + } + opt_cnt++; + } /* while (there are options) */ - if (opt_char == 1) - opt_char = 'f'; - for (l = limits_tbl; l != &limits_tbl[ARRAY_SIZE(limits_tbl)]; l++) { - if (opt_char == l->option) { - char *val_str; - - getrlimit(l->cmd, &limit); - - val_str = optarg; - if (!val_str && argv[optind] && argv[optind][0] != '-') - val_str = argv[optind++]; /* ++ skips NN in "-c NN" case */ - if (val_str) { - rlim_t val; - - if (strcmp(val_str, "unlimited") == 0) - val = RLIM_INFINITY; - else { - if (sizeof(val) == sizeof(int)) - val = bb_strtou(val_str, NULL, 10); - else if (sizeof(val) == sizeof(long)) - val = bb_strtoul(val_str, NULL, 10); - else - val = bb_strtoull(val_str, NULL, 10); - if (errno) { - bb_error_msg("invalid number '%s'", val_str); - return EXIT_FAILURE; - } - val <<= l->factor_shift; - } -//bb_error_msg("opt %c val_str:'%s' val:%lld", opt_char, val_str, (long long)val); - /* from man bash: "If neither -H nor -S - * is specified, both the soft and hard - * limits are set. */ - if (!opts) - opts = OPT_hard + OPT_soft; - if (opts & OPT_hard) - limit.rlim_max = val; - if (opts & OPT_soft) - limit.rlim_cur = val; -//bb_error_msg("setrlimit(%d, %lld, %lld)", l->cmd, (long long)limit.rlim_cur, (long long)limit.rlim_max); - if (setrlimit(l->cmd, &limit) < 0) { - bb_perror_msg("error setting limit"); - return EXIT_FAILURE; - } - } else { - printlim(opts, &limit, l); - } - break; - } - } /* for (every possible opt) */ + if (!(opts & (OPT_hard | OPT_soft))) + opts |= (OPT_hard | OPT_soft); + if (opts & OPT_all) { + for (i = 0; i < ARRAY_SIZE(limits_tbl); i++) { + getrlimit(limits_tbl[i].cmd, &limit); + printf("-%c: %-30s ", limit_chars[i], limits_tbl[i].name); + printlim(opts, &limit, &limits_tbl[i]); + } + return EXIT_SUCCESS; + } - if (l == &limits_tbl[ARRAY_SIZE(limits_tbl)]) { - /* bad option. getopt already complained. */ + /* Second pass: set or print limits, in order */ + GETOPT_RESET(); + while (1) { + char *val_str; + int opt_char = getopt(argc, argv, ulimit_opt_string); + + if (opt_char == -1) break; + if (opt_char == 'H') + continue; + if (opt_char == 'S') + continue; + //if (opt_char == 'a') - impossible + + i = 0; /* if "ulimit NNN", -f is assumed */ + if (opt_char != 1) { + i = strchrnul(limit_chars, opt_char) - limit_chars; + //if (i >= ARRAY_SIZE(limits_tbl)) - bad option, impossible + } + + val_str = optarg; + if (!val_str && argv[optind] && argv[optind][0] != '-') + val_str = argv[optind++]; /* ++ skips NN in "-c NN" case */ + + getrlimit(limits_tbl[i].cmd, &limit); + if (!val_str) { + if (opt_cnt > 1) + printf("-%c: %-30s ", limit_chars[i], limits_tbl[i].name); + printlim(opts, &limit, &limits_tbl[i]); + } else { + rlim_t val = RLIM_INFINITY; + if (strcmp(val_str, "unlimited") != 0) { + if (sizeof(val) == sizeof(int)) + val = bb_strtou(val_str, NULL, 10); + else if (sizeof(val) == sizeof(long)) + val = bb_strtoul(val_str, NULL, 10); + else + val = bb_strtoull(val_str, NULL, 10); + if (errno) { + bb_error_msg("invalid number '%s'", val_str); + return EXIT_FAILURE; + } + val <<= limits_tbl[i].factor_shift; + } +//bb_error_msg("opt %c val_str:'%s' val:%lld", opt_char, val_str, (long long)val); + /* from man bash: "If neither -H nor -S + * is specified, both the soft and hard + * limits are set. */ + if (opts & OPT_hard) + limit.rlim_max = val; + if (opts & OPT_soft) + limit.rlim_cur = val; +//bb_error_msg("setrlimit(%d, %lld, %lld)", limits_tbl[i].cmd, (long long)limit.rlim_cur, (long long)limit.rlim_max); + if (setrlimit(limits_tbl[i].cmd, &limit) < 0) { + bb_perror_msg("error setting limit"); + return EXIT_FAILURE; + } } } /* while (there are options) */ - return 0; + if (opt_cnt == 0) { + /* "bare ulimit": treat it as if it was -f */ + getrlimit(limits_tbl[0].cmd, &limit); + printlim(opts, &limit, &limits_tbl[0]); + } + + return EXIT_SUCCESS; } -- cgit v1.2.3