From 7a43bd07e64e6db795d4661321da1cab14d9c4f6 Mon Sep 17 00:00:00 2001 From: Rob Landley Date: Fri, 20 Jan 2006 17:47:09 +0000 Subject: Zap sysdeps directory, moving Config.in and defconfig to top of tree. (Busybox should not be system dependent enough to have different default configurations for different platforms. We're not a kernel.) --- sysdeps/linux/Config.in | 397 --------------------------------------------- sysdeps/linux/defconfig | 423 ------------------------------------------------ 2 files changed, 820 deletions(-) delete mode 100644 sysdeps/linux/Config.in delete mode 100644 sysdeps/linux/defconfig (limited to 'sysdeps/linux') diff --git a/sysdeps/linux/Config.in b/sysdeps/linux/Config.in deleted file mode 100644 index 1858b6081..000000000 --- a/sysdeps/linux/Config.in +++ /dev/null @@ -1,397 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see scripts/kbuild/config-language.txt. -# - -mainmenu "BusyBox Configuration" - -config HAVE_DOT_CONFIG - bool - default y - -config MODULES - bool - default y - -menu "General Configuration" - -choice - prompt "Buffer allocation policy" - default CONFIG_FEATURE_BUFFERS_USE_MALLOC - help - There are 3 ways BusyBox can handle buffer allocations: - - Use malloc. This costs code size for the call to xmalloc. - - Put them on stack. For some very small machines with limited stack - space, this can be deadly. For most folks, this works just fine. - - Put them in BSS. This works beautifully for computers with a real - MMU (and OS support), but wastes runtime RAM for uCLinux. This - behavior was the only one available for BusyBox versions 0.48 and - earlier. - -config CONFIG_FEATURE_BUFFERS_USE_MALLOC - bool "Allocate with Malloc" - -config CONFIG_FEATURE_BUFFERS_GO_ON_STACK - bool "Allocate on the Stack" - -config CONFIG_FEATURE_BUFFERS_GO_IN_BSS - bool "Allocate in the .bss section" - -endchoice - -config CONFIG_FEATURE_VERBOSE_USAGE - bool "Show verbose applet usage messages" - default n - help - All BusyBox applets will show more verbose help messages when - busybox is invoked with --help. This will add a lot of text to the - busybox binary. In the default configuration, this will add about - 13k, but it can add much more depending on your configuration. - -config CONFIG_FEATURE_INSTALLER - bool "Support --install [-s] to install applet links at runtime" - default n - help - Enable 'busybox --install [-s]' support. This will allow you to use - busybox at runtime to create hard links or symlinks for all the - applets that are compiled into busybox. This feature requires the - /proc filesystem. - -config CONFIG_LOCALE_SUPPORT - bool "Enable locale support (system needs locale for this to work)" - default n - help - Enable this if your system has locale support and you would like - busybox to support locale settings. - -config CONFIG_FEATURE_DEVFS - bool "Support for devfs" - default n - help - Enable if you want BusyBox to work with devfs. - -config CONFIG_FEATURE_DEVPTS - bool "Use the devpts filesystem for Unix98 PTYs" - default y if CONFIG_FEATURE_DEVFS - help - Enable if you want BusyBox to use Unix98 PTY support. If enabled, - busybox will use /dev/ptmx for the master side of the pseudoterminal - and /dev/pts/ for the slave side. Otherwise, BSD style - /dev/ttyp will be used. To use this option, you should have - devpts or devfs mounted. - -config CONFIG_FEATURE_CLEAN_UP - bool "Clean up all memory before exiting (usually not needed)" - default n - help - As a size optimization, busybox by default does not cleanup memory - that is dynamically allocated or close files before exiting. This - saves space and is usually not needed since the OS will clean up for - us. Don't enable this unless you have a really good reason to clean - things up manually. - -config CONFIG_FEATURE_SUID - bool "Support for SUID/SGID handling" - default n - help - Support SUID and SGID binaries. - -config CONFIG_FEATURE_SUID_CONFIG - bool "Runtime SUID/SGID configuration via /etc/busybox.conf" - default n if CONFIG_FEATURE_SUID - depends on CONFIG_FEATURE_SUID - help - Allow the SUID / SGID state of an applet to be determined runtime by - checking /etc/busybox.conf. The format of this file is as follows: - - = [Ssx-][Ssx-][x-] (|).(|) - - An example might help: - - [SUID] - su = ssx root.0 # applet su can be run by anyone and runs with euid=0/egid=0 - su = ssx # exactly the same - - mount = sx- root.disk # applet mount can be run by root and members of group disk - # and runs with euid=0 - - cp = --- # disable applet cp for everyone - - The file has to be owned by user root, group root and has to be - writeable only by root: - (chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf) - The busybox executable has to be owned by user root, group - root and has to be setuid root for this to work: - (chown 0.0 /bin/busybox; chmod 4755 /bin/busybox) - - Robert 'sandman' Griebl has more information here: - . - -config CONFIG_FEATURE_SUID_CONFIG_QUIET - bool "Suppress warning message if /etc/busybox.conf is not readable" - default n - depends on CONFIG_FEATURE_SUID_CONFIG - help - /etc/busybox.conf should be readable by the user needing the SUID, check - this option to avoid users to be notified about missing permissions. - -config CONFIG_SELINUX - bool "Support NSA Security Enhanced Linux" - default n - help - Enable support for SE Linux in applets ls, ps, and id. Also provide - the option of compiling in SE Linux applets. - - If you do not have a complete SE Linux Full Userland installed, this - stuff will not compile. Go visit - http://www.nsa.gov/selinux/index.html - to download the necessary stuff to allow busybox to compile with this - option enabled. - - Most people will leave this set to 'N'. - -endmenu - -menu 'Build Options' - -config CONFIG_STATIC - bool "Build BusyBox as a static binary (no shared libs)" - default n - help - If you want to build a static BusyBox binary, which does not - use or require any shared libraries, then enable this option. - This can cause BusyBox to be considerably larger, so you should - leave this option false unless you have a good reason (i.e. - your target platform does not support shared libraries, or - you are building an initrd which doesn't need anything but - BusyBox, etc). - - Most people will leave this set to 'N'. - -config CONFIG_BUILD_LIBBUSYBOX - bool "Build shared libbusybox" - default y - help - Build a shared library libbusybox.so which contains all - libraries used inside busybox. - -config CONFIG_FEATURE_FULL_LIBBUSYBOX - bool "Feature-complete libbusybox" - default n if !CONFIG_FEATURE_SHARED_BUSYBOX - depends on CONFIG_BUILD_LIBBUSYBOX - help - Build a libbusybox with the complete feature-set, disregarding - the actually selected config. - - Normally, libbusybox will only contain the features which are - used by busybox itself. If you plan to write a separate - standalone application which uses libbusybox say 'Y'. - - Say 'N' if in doubt. - -config CONFIG_FEATURE_SHARED_BUSYBOX - bool "Use shared libbusybox for busybox" - default y if CONFIG_BUILD_LIBBUSYBOX - depends on !CONFIG_STATIC && CONFIG_BUILD_LIBBUSYBOX - help - Use libbusybox.so also for busybox itself. - You need to have a working dynamic linker to use this variant. - -config CONFIG_LFS - bool "Build with Large File Support (for accessing files > 2 GB)" - default n - select FDISK_SUPPORT_LARGE_DISKS - help - If you want to build BusyBox with large file support, then enable - this option. This will have no effect if your kernel or your C - library lacks large file support for large files. Some of the - programs that can benefit from large file support include dd, gzip, - cp, mount, tar, and many others. If you want to access files larger - than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'. - -config USING_CROSS_COMPILER - bool "Do you want to build BusyBox with a Cross Compiler?" - default n - help - Do you want to build BusyBox with a Cross Compiler? If so, - then enable this option. Otherwise leave it set to 'N'. - -config CROSS_COMPILER_PREFIX - string "Cross Compiler prefix" - default "/usr/i386-linux-uclibc/bin/i386-uclibc-" - depends on USING_CROSS_COMPILER - help - If you want to build BusyBox with a cross compiler, then you - will need to set this to the cross-compiler prefix. For example, - if my cross-compiler is /usr/i386-linux-uclibc/bin/i386-uclibc-gcc - then I would enter '/usr/i386-linux-uclibc/bin/i386-uclibc-' here, - which will ensure the correct compiler is used. - -config EXTRA_CFLAGS_OPTIONS - string "Any extra CFLAGS options for the compiler?" - default "" - help - Do you want to pass any extra CFLAGS options to the compiler as - you build BusyBox? If so, this is the option for you... For example, - if you want to add some simple compiler switches (like -march=i686), - or check for warnings using -Werror, just those options here. - -config CONFIG_BUILD_AT_ONCE - bool "Compile all sources at once" - default n - help - Normally each source-file is compiled with one invocation of - the compiler. - If you set this option, all sources are compiled at once. - This gives the compiler more opportunities to optimize which can - result in smaller and/or faster binaries. - - Setting this option will consume alot of memory, e.g. if you - enable all applets with all features, gcc uses more than 300MB - RAM during compilation of busybox. - - This option is most likely only beneficial for newer compilers - such as gcc-4.1 and above. - - Say 'N' unless you know what you are doing. - -config CONFIG_FEATURE_SUSv2 - bool "Enable features that are in SuSv2 but not SuSv3?" - default y - help - This option will enable backwards compatability with SuSv2, - specifically, numeric options such as 'head -1 ' will be - supported. - -config CONFIG_FEATURE_SUSv2_OBSOLETE - bool "Enable features that are obsolete in SuSv2" - depends on CONFIG_FEATURE_SUSv2 - default y - help - Enable pre- SuSv2 features which are deprecated in SuSv2 and - above. - Disables support for e.g. numeric arguments in fold. - -endmenu - -menu 'Installation Options' - -config CONFIG_INSTALL_NO_USR - bool "Don't use /usr" - default n - help - Disable use of /usr. Don't activate this option if you don't know - that you really want this behaviour. - -choice - prompt "Applets links" - default CONFIG_INSTALL_APPLET_SYMLINKS - help - Choose how you install applets links. - -config CONFIG_INSTALL_APPLET_SYMLINKS - bool "as soft-links" - help - Install applets as soft-links to the busybox binary. This needs some - free inodes on the filesystem, but might help with filesystem - generators that can't cope with hard-links. - -config CONFIG_INSTALL_APPLET_HARDLINKS - bool "as hard-links" - help - Install applets as hard-links to the busybox binary. This might count - on a filesystem with few inodes. - -config CONFIG_INSTALL_APPLET_DONT - bool - prompt "not installed" - depends on CONFIG_FEATURE_INSTALLER || CONFIG_FEATURE_SH_STANDALONE_SHELL - help - Do not install applets links. Usefull when using the -install feature - or a standalone shell for rescue pruposes. - -endchoice - -config PREFIX - string "BusyBox installation prefix" - default "./_install" - help - Define your directory to install BusyBox files/subdirs in. - -endmenu - -source archival/Config.in -source coreutils/Config.in -source console-tools/Config.in -source debianutils/Config.in -source editors/Config.in -source findutils/Config.in -source init/Config.in -source loginutils/Config.in -source e2fsprogs/Config.in -source modutils/Config.in -source util-linux/Config.in -source miscutils/Config.in -source networking/Config.in -source procps/Config.in -source shell/Config.in -source sysklogd/Config.in - -menu 'Debugging Options' - -config CONFIG_DEBUG - bool "Build BusyBox with Debugging symbols" - default n - help - Say Y here if you wish to compile BusyBox with debugging symbols. - This will allow you to use a debugger to examine BusyBox internals - while applets are running. This increases the size of the binary - considerably and should only be used when doing development. - If you are doing development and want to debug BusyBox, answer Y. - - Most people should answer N. - -choice - prompt "Additional debugging library" - default CONFIG_NO_DEBUG_LIB - depends on CONFIG_DEBUG - help - Using an additional debugging library will make BusyBox become - considerable larger and will cause it to run more slowly. You - should always leave this option disabled for production use. - - dmalloc support: - ---------------- - This enables compiling with dmalloc ( http://dmalloc.com/ ) - which is an excellent public domain mem leak and malloc problem - detector. To enable dmalloc, before running busybox you will - want to properly set your environment, for example: - export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile - The 'debug=' value is generated using the following command - dmalloc -p log-stats -p log-non-free -p log-bad-space -p log-elapsed-time \ - -p check-fence -p check-heap -p check-lists -p check-blank \ - -p check-funcs -p realloc-copy -p allow-free-null - - Electric-fence support: - ----------------------- - This enables compiling with Electric-fence support. Electric - fence is another very useful malloc debugging library which uses - your computer's virtual memory hardware to detect illegal memory - accesses. This support will make BusyBox be considerable larger - and run slower, so you should leave this option disabled unless - you are hunting a hard to find memory problem. - - -config CONFIG_NO_DEBUG_LIB - bool "None" - -config CONFIG_DMALLOC - bool "Dmalloc" - -config CONFIG_EFENCE - bool "Electric-fence" - -endchoice - - -endmenu diff --git a/sysdeps/linux/defconfig b/sysdeps/linux/defconfig deleted file mode 100644 index 51582d1ae..000000000 --- a/sysdeps/linux/defconfig +++ /dev/null @@ -1,423 +0,0 @@ -# -# Automatically generated make config: don't edit -# -HAVE_DOT_CONFIG=y - -# -# General Configuration -# -# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set -CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y -# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set -CONFIG_FEATURE_VERBOSE_USAGE=y -# CONFIG_FEATURE_INSTALLER is not set -# CONFIG_LOCALE_SUPPORT is not set -# CONFIG_FEATURE_DEVFS is not set -CONFIG_FEATURE_DEVPTS=y -# CONFIG_FEATURE_CLEAN_UP is not set -# CONFIG_FEATURE_SUID is not set -# CONFIG_SELINUX is not set - -# -# Build Options -# -# CONFIG_STATIC is not set -# CONFIG_LFS is not set -# USING_CROSS_COMPILER is not set -EXTRA_CFLAGS_OPTIONS="" - -# -# Installation Options -# -# CONFIG_INSTALL_NO_USR is not set -PREFIX="./_install" - -# -# Archival Utilities -# -# CONFIG_AR is not set -CONFIG_BUNZIP2=y -# CONFIG_CPIO is not set -# CONFIG_DPKG is not set -# CONFIG_DPKG_DEB is not set -CONFIG_GUNZIP=y -# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set -CONFIG_GZIP=y -# CONFIG_RPM2CPIO is not set -# CONFIG_RPM is not set -CONFIG_TAR=y -CONFIG_FEATURE_TAR_CREATE=y -CONFIG_FEATURE_TAR_BZIP2=y -# CONFIG_FEATURE_TAR_FROM is not set -CONFIG_FEATURE_TAR_GZIP=y -# CONFIG_FEATURE_TAR_COMPRESS is not set -CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY=y -CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y -# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set -# CONFIG_UNCOMPRESS is not set -CONFIG_UNZIP=y - -# -# Common options for cpio and tar -# -# CONFIG_FEATURE_UNARCHIVE_TAPE is not set - -# -# Coreutils -# -CONFIG_BASENAME=y -# CONFIG_CAL is not set -CONFIG_CAT=y -CONFIG_CHGRP=y -CONFIG_CHMOD=y -CONFIG_CHOWN=y -CONFIG_CHROOT=y -CONFIG_CMP=y -CONFIG_CP=y -CONFIG_CUT=y -CONFIG_DATE=y -CONFIG_FEATURE_DATE_ISOFMT=y -CONFIG_DD=y -CONFIG_DF=y -CONFIG_DIRNAME=y -# CONFIG_DOS2UNIX is not set -CONFIG_DU=y -CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y -CONFIG_ECHO=y -CONFIG_FEATURE_FANCY_ECHO=y -CONFIG_ENV=y -CONFIG_EXPR=y -CONFIG_FALSE=y -# CONFIG_FOLD is not set -CONFIG_HEAD=y -# CONFIG_FEATURE_FANCY_HEAD is not set -# CONFIG_HOSTID is not set -CONFIG_ID=y -CONFIG_INSTALL=y -# CONFIG_LENGTH is not set -CONFIG_LN=y -# CONFIG_LOGNAME is not set -CONFIG_LS=y -CONFIG_FEATURE_LS_FILETYPES=y -CONFIG_FEATURE_LS_FOLLOWLINKS=y -CONFIG_FEATURE_LS_RECURSIVE=y -CONFIG_FEATURE_LS_SORTFILES=y -CONFIG_FEATURE_LS_TIMESTAMPS=y -CONFIG_FEATURE_LS_USERNAME=y -CONFIG_FEATURE_LS_COLOR=y -# CONFIG_MD5SUM is not set -CONFIG_MKDIR=y -# CONFIG_MKFIFO is not set -CONFIG_MKNOD=y -CONFIG_MV=y -# CONFIG_OD is not set -# CONFIG_PRINTF is not set -CONFIG_PWD=y -# CONFIG_REALPATH is not set -CONFIG_RM=y -CONFIG_RMDIR=y -# CONFIG_SEQ is not set -# CONFIG_SHA1SUM is not set -CONFIG_SLEEP=y -# CONFIG_FEATURE_FANCY_SLEEP is not set -CONFIG_SORT=y -CONFIG_FEATURE_SORT_BIG=y -# CONFIG_STTY is not set -CONFIG_SYNC=y -CONFIG_TAIL=y -CONFIG_FEATURE_FANCY_TAIL=y -CONFIG_TEE=y -CONFIG_FEATURE_TEE_USE_BLOCK_IO=y -CONFIG_TEST=y - -# -# test (forced enabled for use with shell) -# -CONFIG_TOUCH=y -CONFIG_TR=y -CONFIG_TRUE=y -CONFIG_TTY=y -CONFIG_UNAME=y -CONFIG_UNIQ=y -CONFIG_USLEEP=y -# CONFIG_UUDECODE is not set -# CONFIG_UUENCODE is not set -# CONFIG_WATCH is not set -CONFIG_WC=y -# CONFIG_WHO is not set -CONFIG_WHOAMI=y -CONFIG_YES=y - -# -# Common options for cp and mv -# -CONFIG_FEATURE_PRESERVE_HARDLINKS=y - -# -# Common options for ls and more -# -CONFIG_FEATURE_AUTOWIDTH=y - -# -# Common options for df, du, ls -# -CONFIG_FEATURE_HUMAN_READABLE=y - -# -# Console Utilities -# -CONFIG_CHVT=y -CONFIG_CLEAR=y -CONFIG_DEALLOCVT=y -# CONFIG_DUMPKMAP is not set -# CONFIG_LOADFONT is not set -# CONFIG_LOADKMAP is not set -CONFIG_OPENVT=y -CONFIG_RESET=y -# CONFIG_SETKEYCODES is not set - -# -# Debian Utilities -# -CONFIG_MKTEMP=y -# CONFIG_PIPE_PROGRESS is not set -CONFIG_READLINK=y -# CONFIG_RUN_PARTS is not set -# CONFIG_START_STOP_DAEMON is not set -CONFIG_WHICH=y - -# -# Editors -# -# CONFIG_AWK is not set -# CONFIG_PATCH is not set -CONFIG_SED=y -CONFIG_VI=y -CONFIG_FEATURE_VI_COLON=y -CONFIG_FEATURE_VI_YANKMARK=y -CONFIG_FEATURE_VI_SEARCH=y -CONFIG_FEATURE_VI_USE_SIGNALS=y -CONFIG_FEATURE_VI_DOT_CMD=y -CONFIG_FEATURE_VI_READONLY=y -CONFIG_FEATURE_VI_SETOPTS=y -CONFIG_FEATURE_VI_SET=y -CONFIG_FEATURE_VI_WIN_RESIZE=y -CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y - -# -# Finding Utilities -# -CONFIG_FIND=y -CONFIG_FEATURE_FIND_MTIME=y -CONFIG_FEATURE_FIND_PERM=y -CONFIG_FEATURE_FIND_TYPE=y -CONFIG_FEATURE_FIND_XDEV=y -# CONFIG_FEATURE_FIND_NEWER is not set -# CONFIG_FEATURE_FIND_INUM is not set -CONFIG_GREP=y -CONFIG_FEATURE_GREP_EGREP_ALIAS=y -CONFIG_FEATURE_GREP_FGREP_ALIAS=y -CONFIG_FEATURE_GREP_CONTEXT=y -CONFIG_XARGS=y -# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set -CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y -CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y -CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y - -# -# Init Utilities -# -CONFIG_INIT=y -CONFIG_FEATURE_USE_INITTAB=y -CONFIG_FEATURE_INITRD=y -# CONFIG_FEATURE_INIT_COREDUMPS is not set -CONFIG_FEATURE_EXTRA_QUIET=y -CONFIG_HALT=y -CONFIG_POWEROFF=y -CONFIG_REBOOT=y -# CONFIG_MESG is not set - -# -# Login/Password Management Utilities -# -# CONFIG_USE_BB_PWD_GRP is not set -# CONFIG_ADDGROUP is not set -# CONFIG_DELGROUP is not set -# CONFIG_ADDUSER is not set -# CONFIG_DELUSER is not set -# CONFIG_GETTY is not set -# CONFIG_LOGIN is not set -# CONFIG_PASSWD is not set -# CONFIG_SU is not set -# CONFIG_SULOGIN is not set -# CONFIG_VLOCK is not set - -# -# Miscellaneous Utilities -# -# CONFIG_ADJTIMEX is not set -# CONFIG_CROND is not set -# CONFIG_CRONTAB is not set -# CONFIG_DC is not set -# CONFIG_DEVFSD is not set -# CONFIG_LAST is not set -# CONFIG_HDPARM is not set -# CONFIG_MAKEDEVS is not set -# CONFIG_MT is not set -# CONFIG_RX is not set -CONFIG_STRINGS=y -CONFIG_TIME=y -# CONFIG_WATCHDOG is not set - -# -# Linux Module Utilities -# -# CONFIG_INSMOD is not set -# CONFIG_LSMOD is not set -# CONFIG_MODPROBE is not set -# CONFIG_RMMOD is not set - -# -# Networking Utilities -# -# CONFIG_FEATURE_IPV6 is not set -# CONFIG_ARPING is not set -# CONFIG_FTPGET is not set -# CONFIG_FTPPUT is not set -CONFIG_HOSTNAME=y -# CONFIG_HTTPD is not set -CONFIG_IFCONFIG=y -CONFIG_FEATURE_IFCONFIG_STATUS=y -# CONFIG_FEATURE_IFCONFIG_SLIP is not set -# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set -# CONFIG_FEATURE_IFCONFIG_HW is not set -# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set -# CONFIG_IFUPDOWN is not set -# CONFIG_INETD is not set -# CONFIG_IP is not set -# CONFIG_IPCALC is not set -# CONFIG_IPADDR is not set -# CONFIG_IPLINK is not set -# CONFIG_IPROUTE is not set -# CONFIG_IPTUNNEL is not set -# CONFIG_NAMEIF is not set -# CONFIG_NC is not set -# CONFIG_NETSTAT is not set -# CONFIG_NSLOOKUP is not set -CONFIG_PING=y -CONFIG_FEATURE_FANCY_PING=y -CONFIG_ROUTE=y -# CONFIG_TELNET is not set -# CONFIG_TELNETD is not set -# CONFIG_TFTP is not set -# CONFIG_TRACEROUTE is not set -# CONFIG_VCONFIG is not set -CONFIG_WGET=y -CONFIG_FEATURE_WGET_STATUSBAR=y -CONFIG_FEATURE_WGET_AUTHENTICATION=y -# CONFIG_FEATURE_WGET_IP6_LITERAL is not set - -# -# udhcp Server/Client -# -# CONFIG_UDHCPD is not set -# CONFIG_UDHCPC is not set - -# -# Process Utilities -# -CONFIG_FREE=y -CONFIG_KILL=y -CONFIG_KILLALL=y -CONFIG_PIDOF=y -CONFIG_PS=y -# CONFIG_RENICE is not set -# CONFIG_TOP is not set -CONFIG_UPTIME=y -# CONFIG_BB_SYSCTL is not set - -# -# Another Bourne-like Shell -# -CONFIG_FEATURE_SH_IS_ASH=y -# CONFIG_FEATURE_SH_IS_HUSH is not set -# CONFIG_FEATURE_SH_IS_LASH is not set -# CONFIG_FEATURE_SH_IS_MSH is not set -# CONFIG_FEATURE_SH_IS_NONE is not set -CONFIG_ASH=y - -# -# Ash Shell Options -# -CONFIG_ASH_JOB_CONTROL=y -CONFIG_ASH_ALIAS=y -CONFIG_ASH_MATH_SUPPORT=y -CONFIG_ASH_MATH_SUPPORT_64=y -# CONFIG_ASH_GETOPTS is not set -# CONFIG_ASH_CMDCMD is not set -# CONFIG_ASH_MAIL is not set -CONFIG_ASH_OPTIMIZE_FOR_SIZE=y -# CONFIG_ASH_RANDOM_SUPPORT is not set -# CONFIG_HUSH is not set -# CONFIG_LASH is not set -# CONFIG_MSH is not set - -# -# Bourne Shell Options -# -# CONFIG_FEATURE_SH_EXTRA_QUIET is not set -# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set -CONFIG_FEATURE_COMMAND_EDITING=y -CONFIG_FEATURE_COMMAND_HISTORY=15 -CONFIG_FEATURE_COMMAND_SAVEHISTORY=y -CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y -# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set -CONFIG_FEATURE_SH_FANCY_PROMPT=y - -# -# System Logging Utilities -# -CONFIG_SYSLOGD=y -CONFIG_FEATURE_ROTATE_LOGFILE=y -# CONFIG_FEATURE_REMOTE_LOG is not set -# CONFIG_FEATURE_IPC_SYSLOG is not set -CONFIG_KLOGD=y -CONFIG_LOGGER=y - -# -# Linux System Utilities -# -CONFIG_DMESG=y -# CONFIG_FBSET is not set -# CONFIG_FDFLUSH is not set -# CONFIG_FDFORMAT is not set -# CONFIG_FDISK is not set -# CONFIG_FREERAMDISK is not set -# CONFIG_FSCK_MINIX is not set -# CONFIG_MKFS_MINIX is not set -# CONFIG_GETOPT is not set -CONFIG_HEXDUMP=y -# CONFIG_HWCLOCK is not set -# CONFIG_IPCRM is not set -# CONFIG_IPCS is not set -# CONFIG_LOSETUP is not set -# CONFIG_MKSWAP is not set -CONFIG_MORE=y -CONFIG_FEATURE_USE_TERMIOS=y -CONFIG_PIVOT_ROOT=y -# CONFIG_RDATE is not set -CONFIG_SWAPONOFF=y -CONFIG_MOUNT=y -# CONFIG_FEATURE_MOUNT_NFS is not set -CONFIG_UMOUNT=y - -# -# Common options for mount/umount -# -CONFIG_FEATURE_MOUNT_LOOP=y -# CONFIG_FEATURE_MTAB_SUPPORT is not set - -# -# Debugging Options -# -# CONFIG_DEBUG is not set -- cgit v1.2.3