If you just want to try out busybox without installing it, download the tarball, extract it, run "make allyesconfig", and then run "make".
This will create a busybox binary with all features enabled. To try out a busybox applet, type "./busybox [appletname] [options]", for example "./busybox ls -l" or "./busybox cat LICENSE". Type "./busybox" to see a command list, and "busybox appletname --help" to see a brief usage message for a given applet.
BusyBox uses the name it was invoked under to determine which applet is being invoked. (Try "mv busybox ls" and then "./ls -l".) Installing busybox consists of creating symlinks (or hardlinks) to the busybox binary for each applet in busybox, and making sure these symlinks are in the shell's command $PATH. ("make install" creates these symlinks, and "make install-hardlinks" creates hardlinks instead.) The special applet name "busybox" (or with any optional suffix, such as "busybox-static") uses the first argument to determine which applet to run, as shown above.
BusyBox also has a feature called the "standalone shell", where the busybox shell runs any built-in applets before checking the command path. This feature is also enabled by "make allyesconfig", and to try it out run the command line "PATH= ./busybox ash". This will blank your command path and run busybox as your command shell, so the only commands it can find (without an explicit path such as /bin/ls) are the built-in busybox ones. This is another good way to see what's built into busybox. (Note that the standalone shell is dependent on the existence of /proc/self/exe, so before using it in a chroot environment you must mount /proc.)
To build a smaller busybox binary, run "make menuconfig" and disable the features you don't need. (Or run "make allnoconfig" and then use menuconfig to add just the features you need. Don't forget to recompile with "make" once you've finished configuring.)
BusyBox is a package that replaces a dozen standard packages, but it is not by itself a complete bootable system. Building an entire Linux distribution from source is a bit beyond the scope of this FAQ, but it understandably keeps cropping up on the mailing list, so here are some pointers.
Start by learning how to strip a working system down to the bare essentials needed to run one or two commands, so you know what it is you actually need. An excellent practical place to do this is the Linux BootDisk Howto, or for a more theoretical approach try From PowerUp to Bash Prompt.
To learn how to build a working Linux system entirely from source code, the place to go is the Linux From Scratch project. They have an entire book of step-by-step instructions you can read online or download. Be sure to check out the other sections of their main page, including Beyond Linux From Scratch, Hardened Linux From Scratch, their Hints directory, and their LiveCD project. (They also have mailing lists which are better sources of answers to Linux-system building questions than the busybox list.)
If you want an automated yet customizable system builder which produces a BusyBox and uClibc based system, try buildroot, which is another project by the maintainer of the uClibc and BusyBox projects (Erik Andersen). Download the tarball, extract it, unset CC, make. For more instructions, see the website.
Full functionality requires Linux 2.4.x or better. (Earlier versions may still work, but are no longer regularly tested.) A large fraction of the code should run on just about anything. While the current code is fairly Linux specific, it should be fairly easy to port the majority of the code to support, say, FreeBSD or Solaris, or Mac OS X, or even Windows (if you are into that sort of thing).
BusyBox in general will build on any architecture supported by gcc. Kernel module loading for 2.4 Linux kernels is currently limited to ARM, CRIS, H8/300, x86, ia64, x86_64, m68k, MIPS, PowerPC, S390, SH3/4/5, Sparc, v850e, and x86_64 for 2.4.x kernels.
With 2.6.x kernels, module loading support should work on all architectures.
On Linux, BusyBox releases are tested against uClibc (0.9.27 or later) and glibc (2.2 or later). Both should provide full functionality with busybox, and if you find a bug we want to hear about it.
Linux-libc5 is no longer maintained (and has no known advantages over uClibc), dietlibc is known to have numerous unfixed bugs, and klibc is missing too many features to build BusyBox. If you require a small C library for Linux, the busybox developers recommend uClibc.Some BusyBox applets have been built and run under a combination of newlib and libgloss (see this thread). This is still experimental, but may be supported in a future release.
If you simply need help with using or configuring BusyBox, please submit a detailed description of your problem to the BusyBox mailing list at busybox@mail.busybox.net. Please do not send private email to Erik (the maintainer of BusyBox) asking for private help unless you are planning on paying for consulting services. When we answer questions on the BusyBox mailing list, it helps everyone, while private answers help only you...
The developers of BusyBox are busy people, and have only so much they can keep in their brains at a time. As a result, bug reports sometimes get lost when posted to the mailing list. To prevent your bug report from getting lost, if you find a bug in BusyBox, please use the BusyBox Bug and Patch Tracking System to submit a detailed bug report.
The same also applies to patches... Regardless of whether your patch is a bug fix or adds shiney new features, please post your patch to the BusyBox Bug and Patch Tracking System to make certain it is properly considered.
Job control will be turned off since your shell can not obtain a controlling terminal. This typically happens when you run your shell on /dev/console. The kernel will not provide a controlling terminal on the /dev/console device. Your should run your shell on a normal tty such as tty1 or ttyS0 and everything will work perfectly. If you REALLY want your shell to run on /dev/console, then you can hack your kernel (if you are into that sortof thing) by changing drivers/char/tty_io.c to change the lines where it sets "noctty = 1;" to instead set it to "0". I recommend you instead run your shell on a real console...
You have not paid us a single cent and yet you still have the product of many years of our work. We are not your slaves! We work on BusyBox because we find it useful and interesting. If you go off flaming us, we will ignore you.
If you find that you need help with BusyBox, you can ask for help on the BusyBox mailing list at busybox@mail.busybox.net. In addition to the BusyBox mailing list, Erik (andersee), Manuel (mjn3) and others are known to hang out on the uClibc IRC channel: #uclibc on irc.freenode.net.
Please do not send private email to Erik, Manuel, or the other BusyBox contributors asking for private help unless you are planning on paying for consulting services.
When we answer questions on the BusyBox mailing list, it helps everyone since people with similar problems in the future will be able to get help by searching the mailing list archives. Private help is reserved as a paid service. If you need to use private communication, or if you are serious about getting timely assistance with BusyBox, you should seriously consider paying for consulting services.
Sure! Now you have our attention! What you should do is contact Erik Andersen of CodePoet Consulting to bid on your project. If Erik is too busy to personally add your feature, there are many other active BusyBox contributors who will almost certainly be able to help you out. Erik can contact them privately, and may even let you to post your request for services on the mailing list.
We maintain such a list on this site!
Wow, that would be great! If you would like to make a donation to help support BusyBox, and/or request features, you can click here:
To conserve bytes it's good to know where they're being used, and the size of the final executable isn't always a reliable indicator of the size of the components (since various structures are rounded up, so a small change may not even be visible by itself, but many small savings add up).
The busybox Makefile can generate a report of how much space is actually being used by each function and variable. Run "make sizes" (preferably with CONFIG_DEBUG off) to get a list of symbols and the amount of space allocated for each one, sorted by size.