/* vi: set sw=8 ts=8: */ /* * This file suffers from chronically incorrect tabification * of messages. Before editing this file: * 1. Switch you editor to 8-space tab mode. * 2. Do not use \t in messages, use real tab character. * 3. Start each source line with message as follows: * |<7 spaces>"text with tabs".... */ #ifndef __BB_USAGE_H__ #define __BB_USAGE_H__ #define addgroup_trivial_usage \ "[-g GID] group_name [user_name]" #define addgroup_full_usage \ "Add a group to the system" \ "\n\nOptions:\n" \ " -g GID Specify gid" #define adduser_trivial_usage \ "[OPTIONS] user_name" #define adduser_full_usage \ "Add a user to the system" \ "\n\nOptions:\n" \ " -h DIR Assign home directory DIR\n" \ " -g GECOS Assign gecos field GECOS\n" \ " -s SHELL Assign login shell SHELL\n" \ " -G Add the user to existing group GROUP\n" \ " -S Create a system user (ignored)\n" \ " -D Do not assign a password (logins still possible via ssh)\n" \ " -H Do not create the home directory" #define adjtimex_trivial_usage \ "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" #define adjtimex_full_usage \ "Read and optionally set system timebase parameters.\n" \ "See adjtimex(2)." \ "\n\nOptions:\n" \ " -q Quiet mode - do not print\n" \ " -o offset Time offset, microseconds\n" \ " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \ " (positive values make the system clock run fast)\n" \ " -t tick Microseconds per tick, usually 10000\n" \ " -p timeconstant" #define ar_trivial_usage \ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" #define ar_full_usage \ "Extract or list FILES from an ar archive" \ "\n\nOptions:\n" \ " -o Preserve original dates\n" \ " -p Extract to stdout\n" \ " -t List\n" \ " -x Extract\n" \ " -v Verbosely list files processed" #define arp_trivial_usage \ "\n" \ "[-vn] [-H type] [-i if] -a [hostname]\n" \ "[-v] [-i if] -d hostname [pub]\n" \ "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \ "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \ "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n" #define arp_full_usage \ "Manipulate the system ARP cache" \ "\n\nOptions:" \ "\n -a Display (all) hosts" \ "\n -s Set a new ARP entry" \ "\n -d Delete a specified entry" \ "\n -v Verbose" \ "\n -n Don't resolve names" \ "\n -i if Specify network interface (e.g. eth0)" \ "\n -D Read from given device" \ "\n -A, -p Specify protocol family" \ "\n -H hwtype Specify hardware address type" #define arping_trivial_usage \ "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target" #define arping_full_usage \ "Ping hosts by ARP requests/replies" \ "\n\nOptions:\n" \ " -f Quit on first ARP reply\n" \ " -q Be quiet\n" \ " -b Keep broadcasting, don't go unicast\n" \ " -D Duplicated address detection mode\n" \ " -U Unsolicited ARP mode, update your neighbours\n" \ " -A ARP answer mode, update your neighbours\n" \ " -c count Stop after sending count ARP request packets\n" \ " -w timeout Time to wait for ARP reply, in seconds\n" \ " -i device Outgoing interface name, default is eth0\n" \ " -s sender Set specific sender IP address\n" \ " target Target IP address of ARP request" #define ash_trivial_usage \ "[FILE]...\n" \ "or: ash -c command [args]..." #define ash_full_usage \ "The ash shell (command interpreter)" #define awk_trivial_usage \ "[OPTION]... [program-text] [FILE ...]" #define awk_full_usage \ "Options:\n" \ " -v var=val Assign value 'val' to variable 'var'\n" \ " -F sep Use 'sep' as field separator\n" \ " -f progname Read program source from file 'progname'" #define basename_trivial_usage \ "FILE [SUFFIX]" #define basename_full_usage \ "Strip directory path and suffixes from FILE.\n" \ "If specified, also remove any trailing SUFFIX." #define basename_example_usage \ "$ basename /usr/local/bin/foo\n" \ "foo\n" \ "$ basename /usr/local/bin/\n" \ "bin\n" \ "$ basename /foo/bar.txt .txt\n" \ "bar" #define bunzip2_trivial_usage \ "[OPTION]... [FILE]" #define bunzip2_full_usage \ "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ "\n\nOptions:\n" \ " -c Write output to standard output\n" \ " -f Force" #define busybox_notes_usage \ "Hello world!\n" #define bzcat_trivial_usage \ "FILE" #define bzcat_full_usage \ "Uncompress to stdout" #define unlzma_trivial_usage \ "[OPTION]... [FILE]" #define unlzma_full_usage \ "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ "\n\nOptions:\n" \ " -c Write output to standard output\n" \ " -f Force" #define lzmacat_trivial_usage \ "FILE" #define lzmacat_full_usage \ "Uncompress to stdout" #define cal_trivial_usage \ "[-jy] [[month] year]" #define cal_full_usage \ "Display a calendar" \ "\n\nOptions:" \ "\n -j Use julian dates" \ "\n -y Display the entire year" #define cat_trivial_usage \ "[-u] [FILE]..." #define cat_full_usage \ "Concatenate FILE(s) and print them to stdout" \ "\n\nOptions:" \ "\n -u Ignored since unbuffered i/o is always used" #define cat_example_usage \ "$ cat /proc/uptime\n" \ "110716.72 17.67" #define catv_trivial_usage \ "[-etv] [FILE]..." #define catv_full_usage \ "Display nonprinting characters as ^x or M-x" \ "\n\nOptions:\n" \ " -e End each line with $\n" \ " -t Show tabs as ^I\n" \ " -v Don't use ^x or M-x escapes" #define chattr_trivial_usage \ "[-R] [-+=AacDdijsStTu] [-v version] files..." #define chattr_full_usage \ "Change file attributes on an ext2 fs\n\n" \ "Modifiers:\n" \ " - Remove attributes\n" \ " + Add attributes\n" \ " = Set attributes\n" \ "Attributes:\n" \ " A Don't track atime\n" \ " a Append mode only\n" \ " c Enable compress\n" \ " D Write dir contents synchronously\n" \ " d Do not backup with dump\n" \ " i Cannot be modified (immutable)\n" \ " j Write all data to journal first\n" \ " s Zero disk storage when deleted\n" \ " S Write file contents synchronously\n" \ " t Disable tail-merging of partial blocks with other files\n" \ " u Allow file to be undeleted\n" \ "Options:\n" \ " -R Recursively list subdirectories\n" \ " -v Set the file's version/generation number" #define chcon_trivial_usage \ "[OPTIONS] CONTEXT FILE...\n" \ " chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE...\n" \ " chcon [OPTIONS] --reference=RFILE FILE...\n" #define chcon_full_usage \ "Change the security context of each FILE to CONTEXT\n" \ "\n -v, --verbose Verbose" \ "\n -c, --changes Report changes made" \ "\n -h, --no-dereference Affect symlinks instead of their targets" \ "\n -f, --silent, --quiet Suppress most error messages" \ "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \ "\n -u, --user=USER Set user USER in the target security context" \ "\n -r, --role=ROLE Set role ROLE in the target security context" \ "\n -t, --type=TYPE Set type TYPE in the target security context" \ "\n -l, --range=RANGE Set range RANGE in the target security context" \ "\n -R, --recursive Recurse subdirectories" \ #define chmod_trivial_usage \ "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..." #define chmod_full_usage \ "Each MODE is one or more of the letters ugoa, one of the\n" \ "symbols +-= and one or more of the letters rwxst" \ "\n\nOptions:" \ "\n -R Changes files and directories recursively" \ USE_DESKTOP( \ "\n -c List changed files" \ "\n -v List all files" \ "\n -f Hide errors" \ ) #define chmod_example_usage \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ "$ chmod u+x /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ "$ chmod 444 /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" #define chgrp_trivial_usage \ "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..." #define chgrp_full_usage \ "Change the group membership of each FILE to GROUP" \ "\n\nOptions:" \ "\n -R Recurse directories" \ "\n -h Affect symlinks instead of symlink targets" \ "\n -L Traverse all symlinks to directories" \ "\n -H Traverse symlinks on command line only" \ "\n -P Do not traverse symlinks (default)" \ USE_DESKTOP( \ "\n -c List changed files" \ "\n -v Verbose" \ "\n -f Hide errors" \ ) #define chgrp_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chgrp root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" #define chown_trivial_usage \ "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." #define chown_full_usage \ "Change the owner and/or group of each FILE to OWNER and/or GROUP" \ "\n\nOptions:" \ "\n -R Recurse directories" \ "\n -h Affect symlinks instead of symlink targets" \ "\n -L Traverse all symlinks to directories" \ "\n -H Traverse symlinks on command line only" \ "\n -P Do not traverse symlinks (default)" \ USE_DESKTOP( \ "\n -c List changed files" \ "\n -v List all files" \ "\n -f Hide errors" \ ) #define chown_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root.root /tmp/foo\n" \ "ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" #define chpst_trivial_usage \ "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \ "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \ "[-p processes] [-f bytes] [-c bytes] prog args" #define chpst_full_usage \ "Change the process state and run specified program" \ "\n\nOptions:\n" \ " -u user[:grp] Set uid and gid\n" \ " -U user[:grp] Set environment variables UID and GID\n" \ " -e dir Set environment variables as specified by files\n" \ " in the directory: file=1st_line_of_file\n" \ " -/ dir Chroot to dir\n" \ " -n inc Add inc to nice value\n" \ " -m bytes Limit data segment, stack segment, locked physical pages,\n" \ " and total of all segment per process to bytes bytes each\n" \ " -d bytes Limit data segment\n" \ " -o n Limit the number of open file descriptors per process to n\n" \ " -p n Limit number of processes per uid to n\n" \ " -f bytes Limit output file size to bytes bytes\n" \ " -c bytes Limit core file size to bytes bytes\n" \ " -v Verbose\n" \ " -P Run prog in a new process group\n" \ " -0 Close standard input\n" \ " -1 Close standard output\n" \ " -2 Close standard error" #define setuidgid_trivial_usage \ "account prog args" #define setuidgid_full_usage \ "Set uid and gid to account's uid and gid, removing all supplementary\n" \ "groups, then run prog" #define envuidgid_trivial_usage \ "account prog args" #define envuidgid_full_usage \ "Set $UID to account's uid and $GID to account's gid, then run prog" #define envdir_trivial_usage \ "dir prog args" #define envdir_full_usage \ "Set various environment variables as specified by files\n" \ "in the directory dir, then run prog" #define softlimit_trivial_usage \ "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \ "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \ "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args" #define softlimit_full_usage \ "Set soft resource limits, then run prog" \ "\n\nOptions:\n" \ " -m n Same as -d n -s n -l n -a n\n" \ " -d n Limit the data segment per process to n bytes\n" \ " -s n Limit the stack segment per process to n bytes\n" \ " -l n Limit the locked physical pages per process to n bytes\n" \ " -a n Limit the total of all segments per process to n bytes\n" \ " -o n Limit the number of open file descriptors per process to n\n" \ " -p n Limit the number of processes per uid to n\n" \ "Options controlling file sizes:\n" \ " -f n Limit output file sizes to n bytes\n" \ " -c n Limit core file sizes to n bytes\n" \ "Efficiency opts:\n" \ " -r n Limit the resident set size to n bytes. This limit is not\n" \ " enforced unless physical memory is full\n" \ " -t n Limit the CPU time to n seconds. This limit is not enforced\n" \ " except that the process receives a SIGXCPU signal after n seconds\n" \ "\n" \ "Some options may have no effect on some operating systems\n" \ "n may be =, indicating that soft limit should be set equal to hard limit" #define chroot_trivial_usage \ "NEWROOT [COMMAND...]" #define chroot_full_usage \ "Run COMMAND with root directory set to NEWROOT" #define chroot_example_usage \ "$ ls -l /bin/ls\n" \ "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ "# mount /dev/hdc1 /mnt -t minix\n" \ "# chroot /mnt\n" \ "# ls -l /bin/ls\n" \ "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" #define chvt_trivial_usage \ "N" #define chvt_full_usage \ "Change the foreground virtual terminal to /dev/ttyN" #define cksum_trivial_usage \ "FILES..." #define cksum_full_usage \ "Calculate the CRC32 checksums of FILES" #define clear_trivial_usage \ "" #define clear_full_usage \ "Clear screen" #define cmp_trivial_usage \ "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]" #define cmp_full_usage \ "Compares FILE1 vs stdin if FILE2 is not specified" \ "\n\nOptions:\n" \ " -l Write the byte numbers (decimal) and values (octal)\n" \ " for all differing bytes\n" \ " -s Quiet mode - do not print" #define comm_trivial_usage \ "[-123] FILE1 FILE2" #define comm_full_usage \ "Compare FILE1 to FILE2, or to stdin if - is specified" \ "\n\nOptions:\n" \ " -1 Suppress lines unique to FILE1\n" \ " -2 Suppress lines unique to FILE2\n" \ " -3 Suppress lines common to both files" #define bbconfig_trivial_usage \ "" #define bbconfig_full_usage \ "Print the config file which built busybox" #define bbsh_trivial_usage \ "[FILE]...\n" \ "or: bbsh -c command [args]..." #define bbsh_full_usage \ "The bbsh shell (command interpreter)" #define chrt_trivial_usage \ "[OPTION]... [prio] [pid | command [arg]...]" #define chrt_full_usage \ "manipulate real-time attributes of a process" \ "\n\nOptions:\n" \ " -p operate on pid\n" \ " -r set scheduling policy to SCHED_RR\n" \ " -f set scheduling policy to SCHED_FIFO\n" \ " -o set scheduling policy to SCHED_OTHER\n" \ " -m show min and max priorities" #define chrt_example_usage \ "$ chrt -r 4 sleep 900 ; x=$!\n" \ "$ chrt -f -p 3 $x\n" \ "You need CAP_SYS_NICE privileges to set scheduling attributes of a process" #define cp_trivial_usage \ "[OPTION]... SOURCE DEST" #define cp_full_usage \ "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \ "\n\nOptions:" \ "\n -a Same as -dpR" \ USE_SELINUX( \ "\n -c Preserves security context" \ ) \ "\n -d,-P Preserve links" \ "\n -H,-L Dereference all symlinks (default)" \ "\n -p Preserve file attributes if possible" \ "\n -f Force overwrite" \ "\n -i Prompt before overwrite" \ "\n -R,-r Recurse directories" \ "\n -l,-s Create (sym)links" #define cpio_trivial_usage \ "-[dimtuv][F cpiofile]" #define cpio_full_usage \ "Extract or list files from a cpio archive\n" \ "Main operation mode:\n" \ " d Make leading directories\n" \ " i Extract\n" \ " m Preserve mtime\n" \ " t List\n" \ " v Verbose\n" \ " u Unconditional overwrite\n" \ " F Input from file" #define crond_trivial_usage \ "-d[#] -c -f -b" #define crond_full_usage \ " -d [#] -l [#] -S -L logfile -f -b -c dir\n" \ " -d num Debug level\n" \ " -l num Log level (8 - default)\n" \ " -S Log to syslogd (default)\n" \ " -L file Log to file\n" \ " -f Run in foreground\n" \ " -b Run in background (default)\n" \ " -c dir Working dir" #define crontab_trivial_usage \ "[-c dir] {file|-}|[-u|-l|-e|-d user]" #define crontab_full_usage \ " File replace crontab from file\n" \ " - replace crontab from stdin\n" \ " -u user specify user\n" \ " -l [user] list crontab for user\n" \ " -e [user] edit crontab for user\n" \ " -d [user] delete crontab for user\n" \ " -c dir specify crontab directory" #define cut_trivial_usage \ "[OPTION]... [FILE]..." #define cut_full_usage \ "Print selected fields from each input FILE to standard output" \ "\n\nOptions:\n" \ " -b LIST Output only bytes from LIST\n" \ " -c LIST Output only characters from LIST\n" \ " -d CHAR Use CHAR instead of tab as the field delimiter\n" \ " -s Output only the lines containing delimiter\n" \ " -f N Print only these fields\n" \ " -n Ignored" #define cut_example_usage \ "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ "Hello\n" \ "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ "world\n" #define date_trivial_usage \ "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]" #define date_full_usage \ "Display current time in the given FORMAT, or set system date" \ "\n\nOptions:\n" \ " -R Outputs RFC-822 compliant date string\n" \ " -d STRING Displays time described by STRING, not 'now'\n" \ USE_FEATURE_DATE_ISOFMT( \ " -I[TIMESPEC] Outputs an ISO-8601 compliant date/time string\n" \ " TIMESPEC='date' (or missing) for date only,\n" \ " 'hours', 'minutes', or 'seconds' for date and,\n" \ " time to the indicated precision\n" \ " -D hint Use 'hint' as date format, via strptime()\n" \ ) \ " -s Sets time described by STRING\n" \ " -r FILE Displays the last modification time of FILE\n" \ " -u Prints or sets Coordinated Universal Time" #define date_example_usage \ "$ date\n" \ "Wed Apr 12 18:52:41 MDT 2000\n" #define dc_trivial_usage \ "expression ..." #define dc_full_usage \ "This is a Tiny RPN calculator that understands the\n" \ "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \ "**, exp, and, or, not, eor.\n" \ "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \ "\n\nOptions:\n" \ "p - Prints the value on the top of the stack, without altering the stack\n" \ "f - Prints the entire contents of the stack without altering anything\n" \ "o - Pops the value off the top of the stack and uses it to set the output radix\n" \ " Only 10 and 16 are supported" #define dc_example_usage \ "$ dc 2 2 + p\n" \ "4\n" \ "$ dc 8 8 \\* 2 2 + / p\n" \ "16\n" \ "$ dc 0 1 and p\n" \ "0\n" \ "$ dc 0 1 or p\n" \ "1\n" \ "$ echo 72 9 div 8 mul p | dc\n" \ "64\n" #define dd_trivial_usage \ "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]") #define dd_full_usage \ "Copy a file with converting and formatting" \ "\n\nOptions:\n" \ " if=FILE Read from FILE instead of stdin\n" \ " of=FILE Write to FILE instead of stdout\n" \ " bs=N Read and write N bytes at a time\n" \ USE_FEATURE_DD_IBS_OBS( \ " ibs=N Read N bytes at a time\n") \ USE_FEATURE_DD_IBS_OBS( \ " obs=N Write N bytes at a time\n") \ " count=N Copy only N input blocks\n" \ " skip=N Skip N input blocks\n" \ " seek=N Skip N output blocks\n" \ USE_FEATURE_DD_IBS_OBS( \ " conv=notrunc Don't truncate output file\n" \ " conv=noerror Continue after read errors\n" \ " conv=sync Pad blocks with zeros\n") \ "\n" \ "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \ "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" #define dd_example_usage \ "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ "4+0 records in\n" \ "4+0 records out\n" #define deallocvt_trivial_usage \ "[N]" #define deallocvt_full_usage \ "Deallocate unused virtual terminal /dev/ttyN" #define delgroup_trivial_usage \ "GROUP" #define delgroup_full_usage \ "Delete group GROUP from the system" #define deluser_trivial_usage \ "USER" #define deluser_full_usage \ "Delete user USER from the system" #define devfsd_trivial_usage \ "mntpnt [-v]" \ USE_DEVFSD_FG_NP("[-fg][-np]" ) #define devfsd_full_usage \ "Manage devfs permissions and old device name symlinks" \ "\n\nOptions:" \ "\n mntpnt The mount point where devfs is mounted" \ "\n -v Print the protocol version numbers for devfsd" \ "\n and the kernel-side protocol version and exits" \ USE_DEVFSD_FG_NP( \ "\n -fg Run the daemon in the foreground" \ "\n -np Exit after parsing the configuration file" \ "\n and processing synthetic REGISTER events," \ "\n do not poll for events") #define df_trivial_usage \ "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]" #define df_full_usage \ "Print the filesystem space used and space available" \ "\n\nOptions:\n" \ USE_FEATURE_HUMAN_READABLE( \ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \ " -m Print sizes in megabytes\n" \ " -k Print sizes in kilobytes(default)") \ SKIP_FEATURE_HUMAN_READABLE( \ "\n -k Ignored") #define df_example_usage \ "$ df\n" \ "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" \ "/dev/sda1 64216 36364 27852 57% /boot\n" \ "$ df /dev/sda3\n" \ "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" #define dhcprelay_trivial_usage \ "[client_device_list] [server_device]" #define dhcprelay_full_usage \ "Relay dhcp requests from client devices to server device" #define dhcprelay_trivial_usage \ "[client_device_list] [server_device]" #define dhcprelay_full_usage \ "Relay dhcp requests from client devices to server device" #define diff_trivial_usage \ "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" #define diff_full_usage \ "Compare files line by line and output the differences between them.\n" \ "This diff implementation only supports unified diffs." \ "\n\nOptions:\n" \ " -a Treat all files as text\n" \ " -b Ignore changes in the amount of whitespace\n" \ " -d Try hard to find a smaller set of changes\n" \ " -i Ignore case differences\n" \ " -L Use LABEL instead of the filename in the unified header\n" \ " -N Treat absent files as empty\n" \ " -q Output only whether files differ\n" \ " -r Recursively compare subdirectories\n" \ " -S Start with FILE when comparing directories\n" \ " -T Make tabs line up by prefixing a tab when necessary\n" \ " -s Report when two files are the same\n" \ " -t Expand tabs to spaces in output\n" \ " -U Output LINES lines of context\n" \ " -w Ignore all whitespace" #define dirname_trivial_usage \ "FILENAME" #define dirname_full_usage \ "Strip non-directory suffix from FILENAME" #define dirname_example_usage \ "$ dirname /tmp/foo\n" \ "/tmp\n" \ "$ dirname /tmp/foo/\n" \ "/tmp\n" #define dmesg_trivial_usage \ "[-c] [-n LEVEL] [-s SIZE]" #define dmesg_full_usage \ "Print or control the kernel ring buffer" \ "\n\nOptions:\n" \ " -c Clears the ring buffer's contents after printing\n" \ " -n LEVEL Sets console logging level\n" \ " -s SIZE Use a buffer of size SIZE" #define dnsd_trivial_usage \ "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" #define dnsd_full_usage \ "Small and static DNS server daemon" \ "\n\nOptions:\n" \ " -c Config filename\n" \ " -t TTL in seconds\n" \ " -p Listening port\n" \ " -i Listening ip (default all)\n" \ " -d Daemonize" #define dos2unix_trivial_usage \ "[option] [FILE]" #define dos2unix_full_usage \ "Convert FILE from dos format to unix format. When no option\n" \ "is given, the input is converted to the opposite output format.\n" \ "When no file is given, use stdin for input and stdout for output." \ "\n\nOptions:\n" \ " -u Output will be in UNIX format\n" \ " -d Output will be in DOS format" #define dpkg_trivial_usage \ "[-ilCPru] [-F option] package_name" #define dpkg_full_usage \ "Install, remove and manage Debian packages" \ "\n\nOptions:\n" \ " -i Install the package\n" \ " -l List of installed packages\n" \ " -C Configure an unpackaged package\n" \ " -F depends Ignore dependency problems\n" \ " -P Purge all files of a package\n" \ " -r Remove all but the configuration files for a package\n" \ " -u Unpack a package, but don't configure it" #define dpkg_deb_trivial_usage \ "[-cefxX] FILE [argument]" #define dpkg_deb_full_usage \ "Perform actions on Debian packages (.debs)" \ "\n\nOptions:\n" \ " -c List contents of filesystem tree\n" \ " -e Extract control files to [argument] directory\n" \ " -f Display control field name starting with [argument]\n" \ " -x Extract packages filesystem tree to directory\n" \ " -X Verbose extract" #define dpkg_deb_example_usage \ "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" #define du_trivial_usage \ "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..." #define du_full_usage \ "Summarize disk space used for each FILE and/or directory.\n" \ "Disk space is printed in units of " \ USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \ SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \ " bytes." \ "\n\nOptions:\n" \ " -a Show sizes of files in addition to directories\n" \ " -H Follow symlinks that are FILE command line args\n" \ " -L Follow all symlinks encountered\n" \ " -d N Limit output to directories (and files with -a) of depth < N\n" \ " -c Output a grand total\n" \ " -l Count sizes many times if hard linked\n" \ " -s Display only a total for each argument\n" \ " -x Skip directories on different filesystems\n" \ USE_FEATURE_HUMAN_READABLE( \ " -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \ " -m Print sizes in megabytes\n" \ ) \ " -k Print sizes in kilobytes" \ USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)") #define du_example_usage \ "$ du\n" \ "16 ./CVS\n" \ "12 ./kernel-patches/CVS\n" \ "80 ./kernel-patches\n" \ "12 ./tests/CVS\n" \ "36 ./tests\n" \ "12 ./scripts/CVS\n" \ "16 ./scripts\n" \ "12 ./docs/CVS\n" \ "104 ./docs\n" \ "2417 .\n" #define dumpkmap_trivial_usage \ "> keymap" #define dumpkmap_full_usage \ "Print out a binary keyboard translation table to standard output" #define dumpkmap_example_usage \ "$ dumpkmap > keymap\n" #define dumpleases_trivial_usage \ "[-r|-a] [-f LEASEFILE]" #define dumpleases_full_usage \ "Display DHCP leases granted by udhcpd" \ "\n\nOptions:\n" \ " -f, --file=FILENAME Leases file to load\n" \ " -r, --remaining Interpret lease times as time remaining\n" \ " -a, --absolute Interpret lease times as expire time" #define e2fsck_trivial_usage \ "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \ "[-I inode_buffer_blocks] [-P process_inode_size] " \ "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ "[-E extended-options] device" #define e2fsck_full_usage \ "Check ext2/ext3 file system" \ "\n\nOptions:\n" \ " -p Automatic repair (no questions)\n" \ " -n Make no changes to the filesystem\n" \ " -y Assume 'yes' to all questions\n" \ " -c Check for bad blocks and add them to the badblock list\n" \ " -f Force checking even if filesystem is marked clean\n" \ " -v Be verbose\n" \ " -b superblock Use alternative superblock\n" \ " -B blocksize Force blocksize when looking for superblock\n" \ " -j journal Set location of the external journal\n" \ " -l file Add to badblocks list\n" \ " -L file Set badblocks list" #define echo_trivial_usage \ USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]" #define echo_full_usage \ "Print the specified ARGs to stdout" \ USE_FEATURE_FANCY_ECHO( \ "\n\nOptions:\n" \ " -n Suppress trailing newline\n" \ " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \ " -E Disable interpretation of backslash-escaped characters" \ ) #define echo_example_usage \ "$ echo \"Erik is cool\"\n" \ "Erik is cool\n" \ USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ "Erik\n" \ "is\n" \ "cool\n" \ "$ echo \"Erik\\nis\\ncool\"\n" \ "Erik\\nis\\ncool\n") #define eject_trivial_usage \ "[-t] [-T] [DEVICE]" #define eject_full_usage \ "Eject specified DEVICE (or default /dev/cdrom)" \ "\n\nOptions:\n" \ " -t Close tray\n" \ " -T Open/close tray (toggle)" #define ed_trivial_usage "" #define ed_full_usage "" #define env_trivial_usage \ "[-iu] [-] [name=value]... [command]" #define env_full_usage \ "Print the current environment or run a program after setting\n" \ "up the specified environment" \ "\n\nOptions:\n" \ " -, -i Start with an empty environment\n" \ " -u Remove variable from the environment" #define ether_wake_trivial_usage \ "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" #define ether_wake_full_usage \ "Send a magic packet to wake up sleeping machines.\n" \ "MAC must be a station address (00:11:22:33:44:55) or\n" \ "a hostname with a known 'ethers' entry." \ "\n\nOptions:\n" \ " -b Send wake-up packet to the broadcast address\n" \ " -i iface Use interface ifname instead of the default \"eth0\"\n" \ " -p pass Append the four or six byte password PW to the packet" #define expr_trivial_usage \ "EXPRESSION" #define expr_full_usage \ "Print the value of EXPRESSION to standard output.\n\n" \ "EXPRESSION may be:\n" \ " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ " ARG1 < ARG2 ARG1 is less than ARG2\n" \ " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \ " ARG1 = ARG2 ARG1 is equal to ARG2\n" \ " ARG1 != ARG2 ARG1 is unequal to ARG2\n" \ " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \ " ARG1 > ARG2 ARG1 is greater than ARG2\n" \ " ARG1 + ARG2 Sum of ARG1 and ARG2\n" \ " ARG1 - ARG2 Difference of ARG1 and ARG2\n" \ " ARG1 * ARG2 Product of ARG1 and ARG2\n" \ " ARG1 / ARG2 Quotient of ARG1 divided by ARG2\n" \ " ARG1 % ARG2 Remainder of ARG1 divided by ARG2\n" \ " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \ " match STRING REGEXP Same as STRING : REGEXP\n" \ " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \ " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \ " length STRING Length of STRING\n" \ " quote TOKEN Interpret TOKEN as a string, even if\n" \ " it is a keyword like 'match' or an\n" \ " operator like '/'\n" \ " (EXPRESSION) Value of EXPRESSION\n\n" \ "Beware that many operators need to be escaped or quoted for shells.\n" \ "Comparisons are arithmetic if both ARGs are numbers, else\n" \ "lexicographical. Pattern matches return the string matched between\n" \ "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \ "of characters matched or 0." #define fakeidentd_trivial_usage \ "[-fiw] [-b ADDR] [STRING]" #define fakeidentd_full_usage \ "Provide fake ident (auth) service" \ "\n\nOptions:" \ "\n -f Run in foreground" \ "\n -i Inetd mode" \ "\n -w Inetd 'wait' mode" \ "\n -b ADDR Bind to specified address" \ "\n STRING Ident answer string (default is 'nobody')" #define false_trivial_usage \ "" #define false_full_usage \ "Return an exit code of FALSE (1)" #define false_example_usage \ "$ false\n" \ "$ echo $?\n" \ "1\n" #define fbset_trivial_usage \ "[options] [mode]" #define fbset_full_usage \ "Show and modify frame buffer settings" #define fbset_example_usage \ "$ fbset\n" \ "mode \"1024x768-76\"\n" \ " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ " geometry 1024 768 1024 768 16\n" \ " timings 12714 128 32 16 4 128 4\n" \ " accel false\n" \ " rgba 5/11,6/5,5/0,0/0\n" \ "endmode\n" #define fdflush_trivial_usage \ "DEVICE" #define fdflush_full_usage \ "Force floppy disk drive to detect disk change" #define fdformat_trivial_usage \ "[-n] DEVICE" #define fdformat_full_usage \ "Format floppy disk" \ "\n\nOptions:\n" \ " -n Don't verify after format" #define fdisk_trivial_usage \ "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" #define fdisk_full_usage \ "Change partition table" \ "\n\nOptions:\n" \ " -l List partition table(s)\n" \ " -u Give Start and End in sector (instead of cylinder) units\n" \ " -s PARTITION Give partition size(s) in blocks\n" \ " -b 2048 (for certain MO disks) use 2048-byte sectors\n" \ " -C CYLINDERS Set the number of cylinders\n" \ " -H HEADS Set the number of heads\n" \ " -S SECTORS Set the number of sectors\n" \ " -v Give fdisk version" #define find_trivial_usage \ "[PATH...] [EXPRESSION]" #define find_full_usage \ "Search for files in a directory hierarchy. The default PATH is\n" \ "the current directory; default EXPRESSION is '-print'\n" \ "\nEXPRESSION may consist of:\n" \ " -follow Dereference symlinks\n" \ " -name PATTERN File name (leading directories removed) matches PATTERN\n" \ " -print Print (default and assumed)" \ USE_FEATURE_FIND_PRINT0( \ "\n -print0 Delimit output with null characters rather than" \ "\n newlines" \ ) USE_FEATURE_FIND_TYPE( \ "\n -type X Filetype matches X (where X is one of: f,d,l,b,c,...)" \ ) USE_FEATURE_FIND_PERM( \ "\n -perm PERMS Permissions match any of (+NNN); all of (-NNN);" \ "\n or exactly (NNN)" \ ) USE_FEATURE_FIND_MTIME( \ "\n -mtime DAYS Modified time is greater than (+N); less than (-N);" \ "\n Or exactly (N) days" \ ) USE_FEATURE_FIND_MMIN( \ "\n -mmin MINS Modified time is greater than (+N); less than (-N);" \ "\n or exactly (N) minutes" \ ) USE_FEATURE_FIND_NEWER( \ "\n -newer FILE Modified time is more recent than FILE's" \ ) USE_FEATURE_FIND_INUM( \ "\n -inum N File has inode number N" \ ) USE_FEATURE_FIND_EXEC( \ "\n -exec CMD Execute CMD with all instances of {} replaced by the" \ "\n files matching EXPRESSION" \ ) USE_DESKTOP( \ "\n -size N File size is N" \ "\n -prune Stop traversing current subtree" \ "\n (expr) Group" \ ) #define find_example_usage \ "$ find / -name passwd\n" \ "/etc/passwd\n" #define fold_trivial_usage \ "[-bs] [-w WIDTH] [FILE]" #define fold_full_usage \ "Wrap input lines in each FILE (standard input by default), writing to\n" \ "standard output" \ "\n\nOptions:\n" \ " -b Count bytes rather than columns\n" \ " -s Break at spaces\n" \ " -w Use WIDTH columns instead of 80" #define free_trivial_usage \ "" #define free_full_usage \ "Display the amount of free and used system memory" #define free_example_usage \ "$ free\n" \ " total used free shared buffers\n" \ " Mem: 257628 248724 8904 59644 93124\n" \ " Swap: 128516 8404 120112\n" \ "Total: 386144 257128 129016\n" \ #define freeramdisk_trivial_usage \ "DEVICE" #define freeramdisk_full_usage \ "Free all memory used by the specified ramdisk" #define freeramdisk_example_usage \ "$ freeramdisk /dev/ram2\n" #define fsck_trivial_usage \ "[-ANPRTV] [ -C fd ] [-t fstype] [fs-options] [filesys ...]" #define fsck_full_usage \ "Check and repair filesystems" \ "\n\nOptions:\n" \ " -A Walk /etc/fstab and check all filesystems\n" \ " -N Don't execute, just show what would be done\n" \ " -P When using -A, check filesystems in parallel\n" \ " -R When using -A, skip the root filesystem\n" \ " -T Don't show title on startup\n" \ " -V Verbose\n" \ " -C n Write status information to specified filedescriptor\n" \ " -t type List of filesystem types to check" #define fsck_minix_trivial_usage \ "[-larvsmf] /dev/name" #define fsck_minix_full_usage \ "Perform a consistency check for MINIX filesystems" \ "\n\nOptions:\n" \ " -l Lists all filenames\n" \ " -r Perform interactive repairs\n" \ " -a Perform automatic repairs\n" \ " -v Verbose\n" \ " -s Outputs super-block information\n" \ " -m Activates MINIX-like \"mode not cleared\" warnings\n" \ " -f Force file system check" #define ftpget_trivial_usage \ "[options] remote-host local-file remote-file" #define ftpget_full_usage \ "Retrieve a remote file via FTP" \ "\n\nOptions:\n" \ " -c, --continue Continue a previous transfer\n" \ " -v, --verbose Verbose\n" \ " -u, --username Username to be used\n" \ " -p, --password Password to be used\n" \ " -P, --port Port number to be used" #define ftpput_trivial_usage \ "[options] remote-host remote-file local-file" #define ftpput_full_usage \ "Store a local file on a remote machine via FTP" \ "\n\nOptions:\n" \ " -v, --verbose Verbose\n" \ " -u, --username Username to be used\n" \ " -p, --password Password to be used\n" \ " -P, --port Port number to be used" #define fuser_trivial_usage \ "[options] file OR port/proto" #define fuser_full_usage \ "Options:\n" \ " -m Show all processes on the same mounted fs\n" \ " -k Kill all processes that match\n" \ " -s Don't print or kill anything\n" \ " -4 When using port/proto only search IPv4 space\n" \ " -6 When using port/proto only search IPv6 space\n" \ " -SIGNAL When used with -k, this signal will be used to kill" #define getenforce_trivial_usage #define getenforce_full_usage #define getopt_trivial_usage \ "[OPTIONS]..." #define getopt_full_usage \ "Parse command options\n" \ " -a, --alternative Allow long options starting with single -\n" \ " -l, --longoptions=longopts Long options to be recognized\n" \ " -n, --name=progname The name under which errors are reported\n" \ " -o, --options=optstring Short options to be recognized\n" \ " -q, --quiet Disable error reporting by getopt(3)\n" \ " -Q, --quiet-output No normal output\n" \ " -s, --shell=shell Set shell quoting conventions\n" \ " -T, --test Test for getopt(1) version\n" \ " -u, --unquoted Do not quote the output" #define getopt_example_usage \ "$ cat getopt.test\n" \ "#!/bin/sh\n" \ "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ " -n 'example.busybox' -- \"$@\"`\n" \ "if [ $? != 0 ] ; then exit 1 ; fi\n" \ "eval set -- \"$GETOPT\"\n" \ "while true ; do\n" \ " case $1 in\n" \ " -a|--a-long) echo \"Option a\" ; shift ;;\n" \ " -b|--b-long) echo \"Option b, argument '$2'\" ; shift 2 ;;\n" \ " -c|--c-long)\n" \ " case \"$2\" in\n" \ " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \ " *) echo \"Option c, argument '$2'\" ; shift 2 ;;\n" \ " esac ;;\n" \ " --) shift ; break ;;\n" \ " *) echo \"Internal error!\" ; exit 1 ;;\n" \ " esac\n" \ "done\n" #define getsebool_trivial_usage \ "-a or getsebool boolean..." #define getsebool_full_usage \ " -a Show all SELinux booleans" #define getty_trivial_usage \ "[OPTIONS]... baud_rate,... line [termtype]" #define getty_full_usage \ "Open a tty, prompt for a login name, then invoke /bin/login" \ "\n\nOptions:\n" \ " -h Enable hardware (RTS/CTS) flow control\n" \ " -i Do not display /etc/issue before running login\n" \ " -L Local line, so do not do carrier detect\n" \ " -m Get baud rate from modem's CONNECT status message\n" \ " -w Wait for a CR or LF before sending /etc/issue\n" \ " -n Do not prompt the user for a login name\n" \ " -f issue_file Display issue_file instead of /etc/issue\n" \ " -l login_app Invoke login_app instead of /bin/login\n" \ " -t timeout Terminate after timeout if no username is read\n" \ " -I initstring Sets the init string to send before anything else\n" \ " -H login_host Log login_host into the utmp file as the hostname" #define grep_trivial_usage \ "[-HhrilLnqvso" \ USE_DESKTOP("w") \ "eF" \ USE_FEATURE_GREP_EGREP_ALIAS("E") \ USE_FEATURE_GREP_CONTEXT("ABC") \ "] PATTERN [FILEs...]" #define grep_full_usage \ "Search for PATTERN in each FILE or standard input" \ "\n\nOptions:" \ "\n -H Prefix output lines with filename where match was found" \ "\n -h Suppress the prefixing filename on output" \ "\n -r Recurse subdirectories" \ "\n -i Ignore case distinctions" \ "\n -l List names of files that match" \ "\n -L List names of files that do not match" \ "\n -n Print line number with output lines" \ "\n -q Be quiet. Returns 0 if PATTERN was found, 1 otherwise" \ "\n -v Select non-matching lines" \ "\n -s Suppress file open/read error messages" \ "\n -c Only print count of matching lines" \ "\n -f Read PATTERN from file" \ "\n -o Show only the part of a line that matches PATTERN" \ USE_DESKTOP( \ "\n -w Match whole words only") \ "\n -e PATTERN is a regular expression" \ "\n -F PATTERN is a set of newline-separated strings" \ USE_FEATURE_GREP_EGREP_ALIAS( \ "\n -E PATTERN is an extended regular expression") \ USE_FEATURE_GREP_CONTEXT( \ "\n -A Print NUM lines of trailing context" \ "\n -B Print NUM lines of leading context" \ "\n -C Print NUM lines of output context") \ #define grep_example_usage \ "$ grep root /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "$ grep ^[rR]oo. /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" #define gunzip_trivial_usage \ "[OPTION]... FILE" #define gunzip_full_usage \ "Uncompress FILE (or standard input if FILE is '-')" \ "\n\nOptions:\n" \ " -c Write output to standard output\n" \ " -f Force read when source is a terminal\n" \ " -t Test compressed file integrity" #define gunzip_example_usage \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" #define gzip_trivial_usage \ "[OPTION]... [FILE]..." #define gzip_full_usage \ "Compress FILE(s) with maximum compression.\n" \ "When FILE is '-' or unspecified, reads standard input. Implies -c." \ "\n\nOptions:\n" \ " -c Write output to standard output instead of FILE.gz\n" \ " -d Decompress\n" \ " -f Force write when destination is a terminal" #define gzip_example_usage \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ "$ gzip /tmp/busybox.tar\n" \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" #define halt_trivial_usage \ "[-d] [-n] [-f]" #define halt_full_usage \ "Halt the system" \ "\n\nOptions:\n" \ " -d Delay interval for halting\n" \ " -n No call to sync()\n" \ " -f Force halt (don't go through init)" #define hdparm_trivial_usage \ "[options] [device] .." #define hdparm_full_usage \ USE_FEATURE_HDPARM_GET_IDENTITY( \ "If no device name is specified try to read from stdin.\n\n") \ "Options:\n" \ " -a Get/set fs readahead\n" \ " -A Set drive read-lookahead flag (0/1)\n" \ " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ " -B Set Advanced Power Management setting (1-255)\n" \ " -c Get/set IDE 32-bit IO setting\n" \ " -C Check IDE power mode status\n" \ USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \ " -d Get/set using_dma flag\n") \ " -D Enable/disable drive defect-mgmt\n" \ " -f Flush buffer cache for device on exit\n" \ " -g Display drive geometry\n" \ " -h Display terse usage information\n" \ USE_FEATURE_HDPARM_GET_IDENTITY( \ " -i Display drive identification\n") \ USE_FEATURE_HDPARM_GET_IDENTITY( \ " -I Detailed/current information directly from drive\n") \ " -k Get/set keep_settings_over_reset flag (0/1)\n" \ " -K Set drive keep_features_over_reset flag (0/1)\n" \ " -L Set drive doorlock (0/1) (removable harddisks only)\n" \ " -m Get/set multiple sector count\n" \ " -n Get/set ignore-write-errors flag (0/1)\n" \ " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ " -P Set drive prefetch count\n" \ " -q Change next setting quietly\n" \ " -Q Get/set DMA tagged-queuing depth (if supported)\n" \ " -r Get/set readonly flag (DANGEROUS to set)\n" \ USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ " -R Register an IDE interface (DANGEROUS)\n") \ " -S Set standby (spindown) timeout\n" \ " -t Perform device read timings\n" \ " -T Perform cache read timings\n" \ " -u Get/set unmaskirq flag (0/1)\n" \ USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ " -U Un-register an IDE interface (DANGEROUS)\n") \ " -v Defaults; same as -mcudkrag for IDE drives\n" \ " -V Display program version and exit immediately\n" \ USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ " -w Perform device reset (DANGEROUS)\n") \ " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \ USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \ " -X Set IDE xfer mode (DANGEROUS)\n" \ " -y Put IDE drive in standby mode\n" \ " -Y Put IDE drive to sleep\n" \ " -Z Disable Seagate auto-powersaving mode\n" \ " -z Re-read partition table" #define head_trivial_usage \ "[OPTION]... [FILE]..." #define head_full_usage \ "Print first 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ "file name. With no FILE, or when FILE is -, read standard input." \ "\n\nOptions:" \ "\n -n NUM Print first NUM lines instead of first 10" \ USE_FEATURE_FANCY_HEAD( \ "\n -c NUM Output the first NUM bytes" \ "\n -q Never output headers giving file names" \ "\n -v Always output headers giving file names") #define head_example_usage \ "$ head -n 2 /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" #define hexdump_trivial_usage \ "[-[bcCdefnosvx]] [OPTION] FILE" #define hexdump_full_usage \ "Display file(s) or standard input in a user specified format" \ "\n\nOptions:\n" \ " -b One-byte octal display\n" \ " -c One-byte character display\n" \ " -C Canonical hex+ASCII, 16 bytes per line\n" \ " -d Two-byte decimal display\n" \ " -e FORMAT STRING\n" \ " -f FORMAT FILE\n" \ " -n LENGTH Interpret only length bytes of input\n" \ " -o Two-byte octal display\n" \ " -s OFFSET Skip offset bytes\n" \ " -v Display all input data\n" \ " -x Two-byte hexadecimal display" #define hostid_trivial_usage \ "" #define hostid_full_usage \ "Print out a unique 32-bit identifier for the machine" #define hostname_trivial_usage \ "[OPTION] {hostname | -F FILE}" #define hostname_full_usage \ "Get or set the hostname or DNS domain name. If a hostname is given\n" \ "(or FILE with the -F parameter), the host name will be set." \ "\n\nOptions:\n" \ " -s Short\n" \ " -i Addresses for the hostname\n" \ " -d DNS domain name\n" \ " -f Fully qualified domain name\n" \ " -F FILE Use the contents of FILE to specify the hostname" #define hostname_example_usage \ "$ hostname\n" \ "sage\n" #define httpd_trivial_usage \ "[-c ]" \ " [-p ]" \ " [-i] [-f]" \ USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \ USE_FEATURE_HTTPD_BASIC_AUTH(" [-r ]") \ USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \ " [-h home]" \ " [-d/-e ]" #define httpd_full_usage \ "Listen for incoming http server requests" \ "\n\nOptions:\n" \ " -c FILE Specifies configuration file. (default httpd.conf)\n" \ " -p PORT Server port (default 80)\n" \ " -i Assume that we are started from inetd\n" \ " -f Do not daemonize\n" \ USE_FEATURE_HTTPD_SETUID( \ " -u USER[:GRP] Set uid/gid after binding to port\n") \ USE_FEATURE_HTTPD_BASIC_AUTH( \ " -r REALM Authentication Realm for Basic Authentication\n") \ USE_FEATURE_HTTPD_AUTH_MD5( \ " -m PASS Crypt PASS with md5 algorithm\n") \ " -h HOME Specifies http HOME directory (default ./)\n" \ " -e STRING HTML encode STRING\n" \ " -d STRING URL decode STRING" #define hwclock_trivial_usage \ "[-r|--show] [-s|--hctosys] [-w|--systohc]" \ " [-l|--localtime] [-u|--utc]" \ " [-f FILE]" #define hwclock_full_usage \ "Query and set a hardware clock (RTC)" \ "\n\nOptions:\n" \ " -r Read hardware clock and print result\n" \ " -s Set the system time from the hardware clock\n" \ " -w Set the hardware clock to the current system time\n" \ " -u The hardware clock is kept in coordinated universal time\n" \ " -l The hardware clock is kept in local time\n" \ " -f FILE Use the specified clock (e.g. /dev/rtc2)" #define id_trivial_usage \ "[OPTIONS]... [USERNAME]" #define id_full_usage \ "Print information for USERNAME or the current user" \ "\n\nOptions:\n" \ USE_SELINUX( \ " -Z prints only the security context\n" \ ) \ " -g Prints only the group ID\n" \ " -u Prints only the user ID\n" \ " -n Print a name instead of a number\n" \ " -r Prints the real user ID instead of the effective ID" #define id_example_usage \ "$ id\n" \ "uid=1000(andersen) gid=1000(andersen)\n" #define ifconfig_trivial_usage \ USE_FEATURE_IFCONFIG_STATUS("[-a]") " [
]" #define ifconfig_full_usage \ "Configure a network interface" \ "\n\nOptions:\n" \ USE_FEATURE_IPV6( \ " [add
[/]]\n") \ USE_FEATURE_IPV6( \ " [del
[/]]\n") \ " [[-]broadcast [
]] [[-]pointopoint [
]]\n" \ " [netmask
] [dstaddr
]\n" \ USE_FEATURE_IFCONFIG_SLIP( \ " [outfill ] [keepalive ]\n") \ " " USE_FEATURE_IFCONFIG_HW("[hw ether
] ") "[metric ] [mtu ]\n" \ " [[-]trailers] [[-]arp] [[-]allmulti]\n" \ " [multicast] [[-]promisc] [txqueuelen ] [[-]dynamic]\n" \ USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \ " [mem_start ] [io_addr ] [irq ]\n") \ " [up|down] ..." #define ifup_trivial_usage \ "<-ahinv> " #define ifup_full_usage \ "Options:\n" \ " -a De/configure all interfaces automatically\n" \ " -i FILE Use FILE for interface definitions\n" \ " -n Print out what would happen, but don't do it\n" \ " (note that this option doesn't disable mappings)\n" \ " -v Print out what would happen before doing it\n" \ " -m Don't run any mappings\n" \ " -f Force de/configuration" #define ifdown_trivial_usage \ "<-ahinv> " #define ifdown_full_usage \ "Options:\n" \ " -a De/configure all interfaces automatically\n" \ " -i FILE Use FILE for interface definitions\n" \ " -n Print out what would happen, but don't do it\n" \ " (note that this option doesn't disable mappings)\n" \ " -v Print out what would happen before doing it\n" \ " -m Don't run any mappings\n" \ " -f Force de/configuration" #define inetd_trivial_usage \ "[-f] [-q len] [conf]" #define inetd_full_usage \ "Listen for network connections and launch programs" \ "\n\nOptions:\n" \ " -f Run in foreground\n" \ " -q N Set the size of the socket listen queue to N\n" \ " (default: 128)" #define init_trivial_usage \ "" #define init_full_usage \ "Init is the parent of all processes" #define init_notes_usage \ "This version of init is designed to be run only by the kernel.\n" \ "\n" \ "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \ "runlevels, use sysvinit.\n" \ "\n" \ "BusyBox init works just fine without an inittab. If no inittab is found,\n" \ "it has the following default behavior:\n" \ "\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " ::askfirst:/bin/sh\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/sbin/swapoff -a\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::restart:/sbin/init\n" \ "\n" \ "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \ "\n" \ " tty2::askfirst:/bin/sh\n" \ " tty3::askfirst:/bin/sh\n" \ " tty4::askfirst:/bin/sh\n" \ "\n" \ "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ "\n" \ " :::\n" \ "\n" \ " :\n" \ "\n" \ " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ " The id field is used by BusyBox init to specify the controlling tty for\n" \ " the specified process to run on. The contents of this field are\n" \ " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \ " be unique, although if it isn't you may have strange results. If this\n" \ " field is left blank, the controlling tty is set to the console. Also\n" \ " note that if BusyBox detects that a serial console is in use, then only\n" \ " entries whose controlling tty is either the serial console or /dev/null\n" \ " will be run. BusyBox init does nothing with utmp. We don't need no\n" \ " stinkin' utmp.\n" \ "\n" \ " :\n" \ "\n" \ " The runlevels field is completely ignored.\n" \ "\n" \ " :\n" \ "\n" \ " Valid actions include: sysinit, respawn, askfirst, wait,\n" \ " once, restart, ctrlaltdel, and shutdown.\n" \ "\n" \ " The available actions can be classified into two groups: actions\n" \ " that are run only once, and actions that are re-run when the specified\n" \ " process exits.\n" \ "\n" \ " Run only-once actions:\n" \ "\n" \ " 'sysinit' is the first item run on boot. init waits until all\n" \ " sysinit actions are completed before continuing. Following the\n" \ " completion of all sysinit actions, all 'wait' actions are run.\n" \ " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ " the specified task completes. 'once' actions are asynchronous,\n" \ " therefore, init does not wait for them to complete. 'restart' is\n" \ " the action taken to restart the init process. By default this should\n" \ " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ " actions are run when the system detects that someone on the system\n" \ " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ " wants to run 'reboot' at this point to cause the system to reboot.\n" \ " Finally the 'shutdown' action specifies the actions to taken when\n" \ " init is told to reboot. Unmounting filesystems and disabling swap\n" \ " is a very good here.\n" \ "\n" \ " Run repeatedly actions:\n" \ "\n" \ " 'respawn' actions are run after the 'once' actions. When a process\n" \ " started with a 'respawn' action exits, init automatically restarts\n" \ " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ " respawning out of control. The 'askfirst' actions acts just like\n" \ " respawn, except that before running the specified process it\n" \ " displays the line \"Please press Enter to activate this console.\"\n" \ " and then waits for the user to press enter before starting the\n" \ " specified process.\n" \ "\n" \ " Unrecognized actions (like initdefault) will cause init to emit an\n" \ " error message, and then go along with its business. All actions are\n" \ " run in the order they appear in /etc/inittab.\n" \ "\n" \ " :\n" \ "\n" \ " Specifies the process to be executed and its command line.\n" \ "\n" \ "Example /etc/inittab file:\n" \ "\n" \ " # This is run first except when booting in single-user mode\n" \ " #\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " \n" \ " # /bin/sh invocations on selected ttys\n" \ " #\n" \ " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \ " ::askfirst:-/bin/sh\n" \ " # Start an \"askfirst\" shell on /dev/tty2-4\n" \ " tty2::askfirst:-/bin/sh\n" \ " tty3::askfirst:-/bin/sh\n" \ " tty4::askfirst:-/bin/sh\n" \ " \n" \ " # /sbin/getty invocations for selected ttys\n" \ " #\n" \ " tty4::respawn:/sbin/getty 38400 tty4\n" \ " tty5::respawn:/sbin/getty 38400 tty5\n" \ " \n" \ " \n" \ " # Example of how to put a getty on a serial line (for a terminal)\n" \ " #\n" \ " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ " #\n" \ " # Example how to put a getty on a modem line\n" \ " #::respawn:/sbin/getty 57600 ttyS2\n" \ " \n" \ " # Stuff to do when restarting the init process\n" \ " ::restart:/sbin/init\n" \ " \n" \ " # Stuff to do before rebooting\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::shutdown:/sbin/swapoff -a\n" #define insmod_trivial_usage \ "[OPTION]... MODULE [symbol=value]..." #define insmod_full_usage \ "Load the specified kernel modules into the kernel" \ "\n\nOptions:\n" \ " -f Force module to load into the wrong kernel version\n" \ " -k Make module autoclean-able\n" \ " -v Verbose output\n" \ " -q Quiet output\n" \ " -L Lock to prevent simultaneous loads of a module\n" \ USE_FEATURE_INSMOD_LOAD_MAP( \ " -m Output load map to stdout\n") \ " -o NAME Set internal module name to NAME\n" \ " -x Do not export externs" #define install_trivial_usage \ "[-cgmops] [sources] " #define install_full_usage \ "Copy files and set attributes" \ "\n\nOptions:\n" \ " -c Copy the file, default\n" \ " -d Create directories\n" \ " -g Set group ownership\n" \ " -m Set permission modes\n" \ " -o Set ownership\n" \ " -p Preserve date\n" \ " -s Strip symbol tables" \ USE_SELINUX( \ "\n -Z Set security context of copy" \ ) #define ip_trivial_usage \ "[OPTIONS] {address | link | route | tunnel | rule} {COMMAND}" #define ip_full_usage \ "ip [OPTIONS] OBJECT {COMMAND}\n" \ "where OBJECT := {link | addr | route | tunnel |rule}\n" \ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" #define ipaddr_trivial_usage \ "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ " [ dev STRING ] [ to PREFIX ] }" #define ipaddr_full_usage \ "ipaddr {add|delete} IFADDR dev STRING\n" \ "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \ " [ to PREFIX ] [ label PATTERN ]\n" \ " IFADDR := PREFIX | ADDR peer PREFIX\n" \ " [ broadcast ADDR ] [ anycast ADDR ]\n" \ " [ label STRING ] [ scope SCOPE-ID ]\n" \ " SCOPE-ID := [ host | link | global | NUMBER ]" #define ipcalc_trivial_usage \ "[OPTION]...
[[/]] [NETMASK]" #define ipcalc_full_usage \ "Calculate IP network settings from a IP address" \ "\n\nOptions:" \ "\n -b --broadcast Display calculated broadcast address" \ "\n -n --network Display calculated network address" \ "\n -m --netmask Display default netmask for IP" \ USE_FEATURE_IPCALC_FANCY( \ "\n -p --prefix Display the prefix for IP/NETMASK" \ "\n -h --hostname Display first resolved host name" \ "\n -s --silent Don't ever display error messages") #define ipcrm_trivial_usage \ "[-[MQS] key] [-[mqs] id]" #define ipcrm_full_usage \ "The upper-case options MQS are used to remove a shared memory segment by a\n" \ "segment by a shmkey value. The lower-case options mqs are used\n" \ "to remove a segment by shmid value.\n" \ "\n\nOptions:\n" \ " -[mM] Remove the memory segment after the last detach\n" \ " -[qQ] Remove the message queue\n" \ " -[sS] Remove the semaphore" #define ipcs_trivial_usage \ "[[-smq] -i shmid] | [[-asmq] [-tcplu]]" #define ipcs_full_usage \ " -i Specify a specific resource id\n" \ "Resource specification:\n" \ " -m Shared memory segments\n" \ " -q Message queues\n" \ " -s Semaphore arrays\n" \ " -a All (default)\n" \ "Output format:\n" \ " -t Time\n" \ " -c Creator\n" \ " -p Pid\n" \ " -l Limits\n" \ " -u Summary" #define iplink_trivial_usage \ "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }" #define iplink_full_usage \ "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \ " dynamic { on | off } |\n" \ " mtu MTU }\n" \ "iplink show [ DEVICE ]" #define iproute_trivial_usage \ "{ list | flush | { add | del | change | append |\n" \ " replace | monitor } ROUTE }" #define iproute_full_usage \ "iproute { list | flush } SELECTOR\n" \ "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \ " [ oif STRING ] [ tos TOS ]\n" \ "iproute { add | del | change | append | replace | monitor } ROUTE\n" \ " SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \ " ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]" #define iprule_trivial_usage \ "{[ list | add | del ] RULE}" #define iprule_full_usage \ "iprule [ list | add | del ] SELECTOR ACTION\n" \ " SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark FWMARK ]\n" \ " [ dev STRING ] [ pref NUMBER ]\n" \ " ACTION := [ table TABLE_ID ] [ nat ADDRESS ]\n" \ " [ prohibit | reject | unreachable ]\n" \ " [ realms [SRCREALM/]DSTREALM ]\n" \ " TABLE_ID := [ local | main | default | NUMBER ]" #define iptunnel_trivial_usage \ "{ add | change | del | show } [ NAME ]\n" \ " [ mode { ipip | gre | sit } ]\n" \ " [ remote ADDR ] [ local ADDR ] [ ttl TTL ]" #define iptunnel_full_usage \ "iptunnel { add | change | del | show } [ NAME ]\n" \ " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \ " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \ " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]" #define kill_trivial_usage \ "[-l] [-signal] process-id [process-id ...]" #define kill_full_usage \ "Send a signal (default is TERM) to the specified process(es)" \ "\n\nOptions:\n" \ " -l List all signal names and numbers" #define kill_example_usage \ "$ ps | grep apache\n" \ "252 root root S [apache]\n" \ "263 www-data www-data S [apache]\n" \ "264 www-data www-data S [apache]\n" \ "265 www-data www-data S [apache]\n" \ "266 www-data www-data S [apache]\n" \ "267 www-data www-data S [apache]\n" \ "$ kill 252\n" #define killall_trivial_usage \ "[-l] [-q] [-signal] process-name [process-name ...]" #define killall_full_usage \ "Send a signal (default is TERM) to the specified process(es)" \ "\n\nOptions:\n" \ " -l List all signal names and numbers\n" \ " -q Do not complain if no processes were killed" #define killall_example_usage \ "$ killall apache\n" #define killall5_trivial_usage \ "[-l] [-signal]" #define killall5_full_usage \ "Send a signal (default is TERM) to all processes outside current session" \ "\n\nOptions:\n" \ " -l List all signal names and numbers\n" \ #define klogd_trivial_usage \ "[-c n] [-n]" #define klogd_full_usage \ "Kernel logger" \ "\n\nOptions:\n" \ " -c n Sets the default log level of console messages to n\n" \ " -n Run as foreground process" #define length_trivial_usage \ "STRING" #define length_full_usage \ "Print out the length of the specified STRING" #define length_example_usage \ "$ length Hello\n" \ "5\n" #define less_trivial_usage \ "[-EMNmh~?] FILE1 FILE2..." #define less_full_usage \ "View a file or list of files. The position within files can be\n" \ "changed, and files can be manipulated in various ways." \ "\n\nOptions:\n" \ " -E Quit once the end of a file is reached\n" \ " -M Display a status line containing the current line numbers\n" \ " and the percentage through the file\n" \ " -N Prefix line numbers to each line\n" \ " -m Display a status line containing the percentage through the\n" \ " file\n" \ " -~ Suppress ~s displayed when input past the end of the file is\n" \ " reached" #define setarch_trivial_usage \ " [args ...]" #define setarch_full_usage \ "Personality may be:\n" \ " linux32 Set 32bit uname emulation\n" \ " linux64 Set 64bit uname emulation" #define ln_trivial_usage \ "[OPTION] TARGET... LINK_NAME|DIRECTORY" #define ln_full_usage \ "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \ "You may use '--' to indicate that all following arguments are non-options." \ "\n\nOptions:\n" \ " -s Make symlinks instead of hardlinks\n" \ " -f Remove existing destination files\n" \ " -n No dereference symlinks - treat like normal file\n" \ " -b Make a backup of the target (if exists) before link operation\n" \ " -S suf Use suffix instead of ~ when making backup files" #define ln_example_usage \ "$ ln -s BusyBox /tmp/ls\n" \ "$ ls -l /tmp/ls\n" \ "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" #define load_policy_trivial_usage \ "[FILE]" #define load_policy_full_usage #define loadfont_trivial_usage \ "< font" #define loadfont_full_usage \ "Load a console font from standard input" #define loadfont_example_usage \ "$ loadfont < /etc/i18n/fontname\n" #define loadkmap_trivial_usage \ "< keymap" #define loadkmap_full_usage \ "Load a binary keyboard translation table from standard input" #define loadkmap_example_usage \ "$ loadkmap < /etc/i18n/lang-keymap\n" #define logger_trivial_usage \ "[OPTION]... [MESSAGE]" #define logger_full_usage \ "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \ "\n\nOptions:\n" \ " -s Log to stderr as well as the system log\n" \ " -t TAG Log using the specified tag (defaults to user name)\n" \ " -p PRIO Enter the message with the specified priority.\n" \ " This may be numerical or a 'facility.level' pair." #define logger_example_usage \ "$ logger \"hello\"\n" #define login_trivial_usage \ "[OPTION]... [username] [ENV=VAR ...]" #define login_full_usage \ "Begin a new session on the system" \ "\n\nOptions:\n" \ " -f Do not authenticate (user already authenticated)\n" \ " -h Name of the remote host for this login\n" \ " -p Preserve environment" #define logname_trivial_usage \ "" #define logname_full_usage \ "Print the name of the current user" #define logname_example_usage \ "$ logname\n" \ "root\n" #define logread_trivial_usage \ "[OPTION]..." #define logread_full_usage \ "Show the messages from syslogd (using circular buffer)" \ "\n\nOptions:\n" \ " -f Output data as the log grows" #define losetup_trivial_usage \ "[-o OFFSET] [-d] LOOPDEVICE [FILE]]" #define losetup_full_usage \ "(Dis)associate LOOPDEVICE with FILE, or display current associations" \ "\n\nOptions:\n" \ " -d Disassociate LOOPDEVICE\n" \ " -o OFFSET Start OFFSET bytes into FILE" #define losetup_notes_usage \ "No arguments will display all current associations.\n" \ "One argument (losetup /dev/loop1) will display the current association\n" \ "(if any), or disassociate it (with -d). The display shows the offset\n" \ "and filename of the file the loop device is currently bound to.\n\n" \ "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ "with an optional offset (-o 12345). Encryption is not yet supported.\n\n" #define ls_trivial_usage \ "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \ USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \ USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \ USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \ USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \ USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \ USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \ USE_SELINUX("K") "] [filenames...]" #define ls_full_usage \ "List directory contents" \ "\n\nOptions:" \ "\n -1 List files in a single column" \ "\n -A Do not list implied . and .." \ "\n -a Do not hide entries starting with ." \ "\n -C List entries by columns" \ USE_FEATURE_LS_TIMESTAMPS( \ "\n -c With -l: show ctime") \ USE_FEATURE_LS_COLOR( \ "\n --color[={always,never,auto}] Control coloring") \ "\n -d List directory entries instead of contents" \ USE_FEATURE_LS_TIMESTAMPS( \ "\n -e List both full date and full time") \ USE_FEATURE_LS_FILETYPES( \ "\n -F Append indicator (one of */=@|) to entries") \ "\n -i List the i-node for each file" \ "\n -l Use a long listing format" \ "\n -n List numeric UIDs and GIDs instead of names" \ USE_FEATURE_LS_FILETYPES( \ "\n -p Append indicator (one of /=@|) to entries") \ USE_FEATURE_LS_FOLLOWLINKS( \ "\n -L List entries pointed to by symlinks") \ USE_FEATURE_LS_RECURSIVE( \ "\n -R List subdirectories recursively") \ USE_FEATURE_LS_SORTFILES( \ "\n -r Sort the listing in reverse order") \ USE_FEATURE_LS_SORTFILES( \ "\n -S Sort the listing by file size") \ "\n -s List the size of each file, in blocks" \ USE_FEATURE_AUTOWIDTH( \ "\n -T NUM Assume Tabstop every NUM columns") \ USE_FEATURE_LS_TIMESTAMPS( \ "\n -t With -l: show modification time") \ USE_FEATURE_LS_TIMESTAMPS( \ "\n -u With -l: show access time") \ USE_FEATURE_LS_SORTFILES( \ "\n -v Sort the listing by version") \ USE_FEATURE_AUTOWIDTH( \ "\n -w NUM Assume the terminal is NUM columns wide") \ "\n -x List entries by lines instead of by columns" \ USE_FEATURE_LS_SORTFILES( \ "\n -X Sort the listing by extension") \ USE_FEATURE_HUMAN_READABLE( \ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \ USE_SELINUX( \ "\n -k Print security context") \ USE_SELINUX( \ "\n -K Print security context in long format") \ USE_SELINUX( \ "\n -Z Print security context and permission") #define lsattr_trivial_usage \ "[-Radlv] [files...]" #define lsattr_full_usage \ "List file attributes on an ext2 fs" \ "\n\nOptions:\n" \ " -R Recursively list subdirectories\n" \ " -a Do not hide entries starting with .\n" \ " -d List directory entries instead of contents\n" \ " -l Print long flag names\n" \ " -v List the file's version/generation number" #define lsmod_trivial_usage \ "" #define lsmod_full_usage \ "List the currently loaded kernel modules" #ifdef CONFIG_FEATURE_MAKEDEVS_LEAF #define makedevs_trivial_usage \ "NAME TYPE MAJOR MINOR FIRST LAST [s]" #define makedevs_full_usage \ "Create a range of block or character special files\n\n" \ "TYPEs include:\n" \ " b: Make a block (buffered) device\n" \ " c or u: Make a character (un-buffered) device\n" \ " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes\n" \ "\n" \ "FIRST specifies the number appended to NAME to create the first device.\n" \ "LAST specifies the number of the last item that should be created\n" \ "If 's' is the last argument, the base device is created as well.\n\n" \ "For example:\n" \ " makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \ " makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" #define makedevs_example_usage \ "# makedevs /dev/ttyS c 4 66 2 63\n" \ "[creates ttyS2-ttyS63]\n" \ "# makedevs /dev/hda b 3 0 0 8 s\n" \ "[creates hda,hda1-hda8]\n" #endif #ifdef CONFIG_FEATURE_MAKEDEVS_TABLE #define makedevs_trivial_usage \ "[-d device_table] rootdir" #define makedevs_full_usage \ "Create a range of special files as specified in a device table.\n" \ "Device table entries take the form of:\n" \ " \n" \ "Where name is the file name, type can be one of:\n" \ " f A regular file\n" \ " d Directory\n" \ " c Character special device file\n" \ " b Block special device file\n" \ " p Fifo (named pipe)\n" \ "uid is the user id for the target file, gid is the group id for the\n" \ "target file. The rest of the entries (major, minor, etc) apply to\n" \ "to device special files. A '-' may be used for blank entries." #define makedevs_example_usage \ "For example:\n" \ " \n" \ "/dev d 755 0 0 - - - - -\n" \ "/dev/console c 666 0 0 5 1 - - -\n" \ "/dev/null c 666 0 0 1 3 0 0 -\n" \ "/dev/zero c 666 0 0 1 5 0 0 -\n" \ "/dev/hda b 640 0 0 3 0 0 0 -\n" \ "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ "Will Produce:\n" \ "/dev\n" \ "/dev/console\n" \ "/dev/null\n" \ "/dev/zero\n" \ "/dev/hda\n" \ "/dev/hda[0-15]\n" #endif #define matchpathcon_trivial_usage \ "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]" #define matchpathcon_full_usage \ " -n Do not display path" \ "\n -N Do not use translations" \ "\n -f Use alternate file_context file" \ "\n -p Use prefix to speed translations" \ "\n -V Verify file context on disk matches defaults" #define md5sum_trivial_usage \ "[OPTION] [FILEs...]" \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") #define md5sum_full_usage \ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ "\n\nOptions:\n" \ "With no FILE, or when FILE is -, read standard input." \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \ " -c Check MD5 sums against given list\n" \ "\nThe following two options are useful only when verifying checksums:\n" \ " -s Don't output anything, status code shows success\n" \ " -w Warn about improperly formatted MD5 checksum lines") #define md5sum_example_usage \ "$ md5sum < busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003\n" \ "$ md5sum busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "$ md5sum -c -\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "busybox: OK\n" \ "^D\n" #define mdev_trivial_usage \ "[-s]" #define mdev_full_usage \ " -s Scan /sys and populate /dev during system boot\n\n" \ "Called with no options (via hotplug) it uses environment variables\n" \ "to determine which device to add/remove." #define mdev_notes_usage "" \ USE_FEATURE_MDEV_CONFIG( \ "The mdev config file contains lines that look like:\n" \ " hd[a-z][0-9]* 0:3 660\n\n" \ "That's device name (with regex match), uid:gid, and permissions.\n\n" \ USE_FEATURE_MDEV_EXEC( \ "Optionally, that can be followed (on the same line) by a special character\n" \ "and a command line to run after creating/before deleting the corresponding\n" \ "device(s). The environment variable $MDEV indicates the active device node\n" \ "(which is useful if it's a regex match). For example:\n\n" \ " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \ "The special characters are @ (run after creating), $ (run before deleting),\n" \ "and * (run both after creating and before deleting). The commands run in\n" \ "the /dev directory, and use system() which calls /bin/sh.\n\n" \ ) \ "Config file parsing stops on the first matching line. If no config\n"\ "entry is matched, devices are created with default 0:0 660. (Make\n"\ "the last line match .* to override this.)\n\n" \ ) #define mesg_trivial_usage \ "[y|n]" #define mesg_full_usage \ "Control write access to your terminal\n" \ " y Allow write access to your terminal\n" \ " n Disallow write access to your terminal" #define mkdir_trivial_usage \ "[OPTION] DIRECTORY..." #define mkdir_full_usage \ "Create the DIRECTORY(ies) if they do not already exist" \ "\n\nOptions:\n" \ " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \ " -p No error if existing, make parent directories as needed" \ USE_SELINUX( \ "\n -Z Set security context" \ ) #define mkdir_example_usage \ "$ mkdir /tmp/foo\n" \ "$ mkdir /tmp/foo\n" \ "/tmp/foo: File exists\n" \ "$ mkdir /tmp/foo/bar/baz\n" \ "/tmp/foo/bar/baz: No such file or directory\n" \ "$ mkdir -p /tmp/foo/bar/baz\n" #define mke2fs_trivial_usage \ "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \ "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \ "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \ "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \ "[-M last-mounted-directory] [-S] [-T filesystem-type] " \ "device [blocks-count]" #define mke2fs_full_usage \ " -b size Block size in bytes\n" \ " -c Check for bad blocks before creating\n" \ " -E opts Set extended options\n" \ " -f size Fragment size in bytes\n" \ " -F Force (ignore sanity checks)\n" \ " -g num Number of blocks in a block group\n" \ " -i ratio The bytes/inode ratio\n" \ " -j Create a journal (ext3)\n" \ " -J opts Set journal options (size/device)\n" \ " -l file Read bad blocks list from file\n" \ " -L lbl Set the volume label\n" \ " -m percent Percent of fs blocks to reserve for admin\n" \ " -M dir Set last mounted directory\n" \ " -n Do not actually create anything\n" \ " -N num Number of inodes to create\n" \ " -o os Set the 'creator os' field\n" \ " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \ " -q Quiet execution\n" \ " -r rev Set filesystem revision\n" \ " -S Write superblock and group descriptors only\n" \ " -T fs-type Set usage type (news/largefile/largefile4)\n" \ " -v Verbose execution" #define mkfifo_trivial_usage \ "[OPTIONS] name" #define mkfifo_full_usage \ "Create a named pipe (identical to 'mknod name p')" \ "\n\nOptions:\n" \ " -m Create the pipe using the specified mode (default a=rw)" \ USE_SELINUX( \ "\n -Z Set security context" \ ) #define mkfs_minix_trivial_usage \ "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" #define mkfs_minix_full_usage \ "Make a MINIX filesystem" \ "\n\nOptions:\n" \ " -c Check the device for bad blocks\n" \ " -n [14|30] Specify the maximum length of filenames\n" \ " -i INODES Specify the number of inodes for the filesystem\n" \ " -l FILENAME Read the bad blocks list from FILENAME\n" \ " -v Make a Minix version 2 filesystem" #define mknod_trivial_usage \ "[OPTIONS] NAME TYPE MAJOR MINOR" #define mknod_full_usage \ "Create a special file (block, character, or pipe)" \ "\n\nOptions:\n" \ " -m Create the special file using the specified mode (default a=rw)" \ "\n\nTYPEs include:\n" \ " b: Make a block (buffered) device\n" \ " c or u: Make a character (un-buffered) device\n" \ " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" \ USE_SELINUX( \ "\n -Z Set security context" \ ) #define mknod_example_usage \ "$ mknod /dev/fd0 b 2 0\n" \ "$ mknod -m 644 /tmp/pipe p\n" #define mkswap_trivial_usage \ "[-c] [-v0|-v1] device [block-count]" #define mkswap_full_usage \ "Prepare a disk partition to be used as swap partition" \ "\n\nOptions:\n" \ " -c Check for read-ability\n" \ " -v0 Make version 0 swap [max 128 Megs]\n" \ " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \ " block-count Number of block to use (default is entire partition)" #define mktemp_trivial_usage \ "[-dq] TEMPLATE" #define mktemp_full_usage \ "Create a temporary file with its name based on TEMPLATE.\n" \ "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \ "\n\nOptions:\n" \ " -d Make a directory instead of a file\n" \ " -q Fail silently if an error occurs" #define mktemp_example_usage \ "$ mktemp /tmp/temp.XXXXXX\n" \ "/tmp/temp.mWiLjM\n" \ "$ ls -la /tmp/temp.mWiLjM\n" \ "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" #define modprobe_trivial_usage \ "[-knqrsv] MODULE [symbol=value ...]" #define modprobe_full_usage \ "Options:\n" \ " -k Make module autoclean-able\n" \ " -n Just show what would be done\n" \ " -q Quiet output\n" \ " -r Remove module (stacks) or do autoclean\n" \ " -s Report via syslog instead of stderr\n" \ " -v Verbose output" #define modprobe_notes_usage \ "modprobe can (un)load a stack of modules, passing each module options (when\n" \ "loading). modprobe uses a configuration file to determine what option(s) to\n" \ "pass each module it loads.\n" \ "\n" \ "The configuration file is searched (in order) amongst:\n" \ "\n" \ " /etc/modprobe.conf (2.6 only)\n" \ " /etc/modules.conf\n" \ " /etc/conf.modules (deprecated)\n" \ "\n" \ "They all have the same syntax (see below). If none is present, it is\n" \ "_not_ an error; each loaded module is then expected to load without\n" \ "options. Once a file is found, the others are tested for.\n" \ "\n" \ "/etc/modules.conf entry format:\n" \ "\n" \ " alias \n" \ " Makes it possible to modprobe alias_name, when there is no such module.\n" \ " It makes sense if your mod_name is long, or you want a more representative\n" \ " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \ " This makes it also possible to use a different set of options (below) for\n" \ " the module and the alias.\n" \ " A module can be aliased more than once.\n" \ "\n" \ " options \n" \ " When loading module mod_name (or the module aliased by alias_name), pass\n" \ " the \"symbol=value\" pairs as option to that module.\n" \ "\n" \ "Sample /etc/modules.conf file:\n" \ "\n" \ " options tulip irq=3\n" \ " alias tulip tulip2\n" \ " options tulip2 irq=4 io=0x308\n" \ "\n" \ "Other functionality offered by 'classic' modprobe is not available in\n" \ "this implementation.\n" \ "\n" \ "If module options are present both in the config file, and on the command line,\n" \ "then the options from the command line will be passed to the module _after_\n" \ "the options from the config file. That way, you can have defaults in the config\n" \ "file, and override them for a specific usage from the command line.\n" #define modprobe_example_usage \ "(with the above /etc/modules.conf):\n\n" \ "$ modprobe tulip\n" \ " will load the module 'tulip' with default option 'irq=3'\n\n" \ "$ modprobe tulip irq=5\n" \ " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ "$ modprobe tulip2\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ " which are the default for alias 'tulip2'\n\n" \ "$ modprobe tulip2 irq=8\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \ " from the command line\n\n" \ "$ modprobe tulip2 irq=2 io=0x210\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \ " from the command line\n" #define more_trivial_usage \ "[FILE ...]" #define more_full_usage \ "View FILE or standard input one screenful at a time" #define more_example_usage \ "$ dmesg | more\n" #define mount_trivial_usage \ "[flags] DEVICE NODE [-o options,more-options]" #define mount_full_usage \ "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \ "\n\nOptions:\n" \ " -a Mount all filesystems in fstab\n" \ USE_FEATURE_MTAB_SUPPORT( \ " -f \"Fake\" Add entry to mount table but don't mount it\n" \ " -n Don't write a mount table entry\n" \ ) \ " -o option One of many filesystem options, listed below\n" \ " -r Mount the filesystem read-only\n" \ " -t fs-type Specify the filesystem type\n" \ " -w Mount for reading and writing (default)\n" \ "\n" \ "Options for use with the \"-o\" flag:\n" \ USE_FEATURE_MOUNT_LOOP( \ " loop Ignored (loop devices are autodetected)\n" \ ) \ USE_FEATURE_MOUNT_FLAGS( \ " [a]sync Writes are asynchronous / synchronous\n" \ " [no]atime Disable / enable updates to inode access times\n" \ " [no]diratime Disable / enable atime updates to directories\n" \ " [no]dev Allow use of special device files / disallow them\n" \ " [no]exec Allow use of executable files / disallow them\n" \ " [no]suid Allow set-user-id-root programs / disallow them\n" \ " [r]shared Convert [recursively] to a shared subtree\n" \ " [r]slave Convert [recursively] to a slave subtree\n" \ " [r]private Convert [recursively] to a private subtree\n" \ " [un]bindable Make mount point [un]able to be bind mounted\n" \ " bind Bind a directory to an additional location\n" \ " move Relocate an existing mount point\n" \ ) \ " remount Remount a mounted filesystem, changing its flags\n" \ " ro/rw Mount for read-only / read-write\n" \ "\n" \ "There are EVEN MORE flags that are specific to each filesystem\n" \ "You'll have to see the written documentation for those filesystems" #define mount_example_usage \ "$ mount\n" \ "/dev/hda3 on / type minix (rw)\n" \ "proc on /proc type proc (rw)\n" \ "devpts on /dev/pts type devpts (rw)\n" \ "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ "$ mount cd_image.iso mydir\n" #define mount_notes_usage \ "Returns 0 for success, number of failed mounts for -a, or errno for one mount." #define mountpoint_trivial_usage \ "[-q] <[-d] DIR | -x DEVICE>" #define mountpoint_full_usage \ "mountpoint checks if the directory is a mountpoint" \ "\n\nOptions:\n" \ " -q Be more quiet\n" \ " -d Print major/minor device number of the filesystem\n" \ " -x Print major/minor device number of the blockdevice" #define mountpoint_example_usage \ "$ mountpoint /proc\n" \ "/proc is not a mountpoint\n" \ "$ mountpoint /sys\n" \ "/sys is a mountpoint\n" #define mt_trivial_usage \ "[-f device] opcode value" #define mt_full_usage \ "Control magnetic tape drive operation\n" \ "\nAvailable Opcodes:\n\n" \ "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ "setpart tell unload unlock weof wset" #define mv_trivial_usage \ "[OPTION]... SOURCE DEST\n" \ "or: mv [OPTION]... SOURCE... DIRECTORY" #define mv_full_usage \ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \ "\n\nOptions:\n" \ " -f Don't prompt before overwriting\n" \ " -i Interactive, prompt before overwrite" #define mv_example_usage \ "$ mv /tmp/foo /bin/bar\n" #define nameif_trivial_usage \ "[-s] [-c FILE] [{IFNAME MACADDR}]" #define nameif_full_usage \ "Rename network interface while it in the down state" \ "\n\nOptions:\n" \ " -c FILE Use configuration file (default is /etc/mactab)\n" \ " -s Use syslog (LOCAL0 facility)\n" \ " IFNAME MACADDR new_interface_name interface_mac_address" #define nameif_example_usage \ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ " or\n" \ "$ nameif -c /etc/my_mactab_file\n" \ #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA #define NC_OPTIONS_STR "\n\nOptions:" #else #define NC_OPTIONS_STR #endif #define nc_trivial_usage \ USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \ "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]") #define nc_full_usage \ "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \ NC_OPTIONS_STR \ USE_NC_EXTRA( \ "\n -e Exec rest of command line after connect" \ "\n -i SECS Delay interval for lines sent" \ "\n -w SECS Timeout for connect" \ "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \ ) \ USE_NC_SERVER( \ "\n -l Listen mode, for inbound connects" \ USE_NC_EXTRA( \ "\n (use -l twice with -e for persistent server)") \ "\n -p PORT Local port number" \ ) #define nc_notes_usage "" \ USE_NC_EXTRA( \ "To use netcat as a terminal emulator on a serial port:\n\n" \ "$ stty 115200 -F /dev/ttyS0\n" \ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ ) #define nc_example_usage \ "$ nc foobar.somedomain.com 25\n" \ "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ "help\n" \ "214-Commands supported:\n" \ "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ "214 NOOP QUIT RSET HELP\n" \ "quit\n" \ "221 foobar closing connection\n" #define netstat_trivial_usage \ "[-laenrtuwx]" #define netstat_full_usage \ "Display networking information" \ "\n\nOptions:\n" \ " -l Display listening server sockets\n" \ " -a Display all sockets (default: connected)\n" \ " -e Display other/more information\n" \ " -n Don't resolve names\n" \ " -r Display routing table\n" \ " -t Tcp sockets\n" \ " -u Udp sockets\n" \ " -w Raw sockets\n" \ " -x Unix sockets" #define nice_trivial_usage \ "[-n ADJUST] [COMMAND [ARG] ...]" #define nice_full_usage \ "Run a program with modified scheduling priority" \ "\n\nOptions:\n" \ " -n ADJUST Adjust the scheduling priority by ADJUST" #define nmeter_trivial_usage \ "format_string" #define nmeter_full_usage \ "Monitor system in real time\n\n" \ "Format specifiers:\n" \ "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \ " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \ "%[niface] Monitor network interface 'iface'\n" \ "%m Monitor allocated memory\n" \ "%[mf] Monitor free memory\n" \ "%[mt] Monitor total memory\n" \ "%s Monitor allocated swap\n" \ "%f Monitor number of used file descriptors\n" \ "%Ni Monitor total/specific IRQ rate\n" \ "%x Monitor context switch rate\n" \ "%p Monitor forks\n" \ "%[pn] Monitor # of processes\n" \ "%b Monitor block io\n" \ "%Nt Show time (with N decimal points)\n" \ "%Nd Milliseconds between updates (default=1000)\n" \ "%r Print instead of at EOL" #define nmeter_example_usage \ "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'" #define nohup_trivial_usage \ "COMMAND [ARGS]" #define nohup_full_usage \ "Run a command immune to hangups, with output to a non-tty" #define nohup_example_usage \ "$ nohup make &" #define nslookup_trivial_usage \ "[HOST] [SERVER]" #define nslookup_full_usage \ "Query the nameserver for the IP address of the given HOST\n" \ "optionally using a specified DNS server" #define nslookup_example_usage \ "$ nslookup localhost\n" \ "Server: default\n" \ "Address: default\n" \ "\n" \ "Name: debian\n" \ "Address: 127.0.0.1\n" #define od_trivial_usage \ "[-aBbcDdeFfHhIiLlOovXx] [FILE]" #define od_full_usage \ "Write an unambiguous representation, octal bytes by default, of FILE\n" \ "to standard output. With no FILE, or when FILE is -, read standard input." #define openvt_trivial_usage \ " [ARGS...]" #define openvt_full_usage \ "Start a command on a new virtual terminal" #define openvt_example_usage \ "openvt 2 /bin/ash\n" #define passwd_trivial_usage \ "[OPTION] [name]" #define passwd_full_usage \ "Change a user password. If no name is specified,\n" \ "changes the password for the current user." \ "\n\nOptions:\n" \ " -a Define which algorithm shall be used for the password\n" \ " (choices: des, md5)\n" /* ", sha1)" */ \ " -d Delete the password for the specified user account\n" \ " -l Locks (disables) the specified user account\n" \ " -u Unlocks (re-enables) the specified user account" #define patch_trivial_usage \ "[-p] [-i ]" #define patch_full_usage \ " -p NUM Strip NUM leading components from file names\n" \ " -i DIFF Read DIFF instead of stdin" #define patch_example_usage \ "$ patch -p1 < example.diff\n" \ "$ patch -p0 -i example.diff" #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) #define USAGE_PIDOF "Options:" #else #define USAGE_PIDOF "\nThis version of pidof accepts no options." #endif #define pidof_trivial_usage \ "process-name [OPTION] [process-name ...]" #define pidof_full_usage \ "List the PIDs of all processes with names that match the\n" \ "names on the command line\n" \ USAGE_PIDOF \ USE_FEATURE_PIDOF_SINGLE( \ "\n -s Display only a single PID") \ USE_FEATURE_PIDOF_OMIT( \ "\n -o Omit given pid") \ USE_FEATURE_PIDOF_OMIT( \ "\n Use %PPID to omit the parent pid of pidof itself") #define pidof_example_usage \ "$ pidof init\n" \ "1\n" \ USE_FEATURE_PIDOF_OMIT( \ "$ pidof /bin/sh\n20351 5973 5950\n") \ USE_FEATURE_PIDOF_OMIT( \ "$ pidof /bin/sh -o %PPID\n20351 5950") #ifndef CONFIG_FEATURE_FANCY_PING #define ping_trivial_usage \ "host" #define ping_full_usage \ "Send ICMP ECHO_REQUEST packets to network hosts" #define ping6_trivial_usage \ "host" #define ping6_full_usage \ "Send ICMP ECHO_REQUEST packets to network hosts" #else #define ping_trivial_usage \ "[OPTION]... host" #define ping_full_usage \ "Send ICMP ECHO_REQUEST packets to network hosts" \ "\n\nOptions:\n" \ " -4, -6 Force IPv4 or IPv6 hostname resolution\n" \ " -c CNT Send only CNT pings\n" \ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \ " -I iface/IP Use interface or IP address as source\n" \ " -q Quiet mode, only displays output at start\n" \ " and when finished" #define ping6_trivial_usage \ "[OPTION]... host" #define ping6_full_usage \ "Send ICMP ECHO_REQUEST packets to network hosts" \ "\n\nOptions:\n" \ " -c CNT Send only CNT pings\n" \ " -s SIZE Send SIZE data bytes in packets (default=56)\n" \ " -I iface/IP Use interface or IP address as source\n" \ " -q Quiet mode, only displays output at start\n" \ " and when finished" #endif #define ping_example_usage \ "$ ping localhost\n" \ "PING slag (127.0.0.1): 56 data bytes\n" \ "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \ "\n" \ "--- debian ping statistics ---\n" \ "1 packets transmitted, 1 packets received, 0% packet loss\n" \ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" #define ping6_example_usage \ "$ ping6 ip6-localhost\n" \ "PING ip6-localhost (::1): 56 data bytes\n" \ "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \ "\n" \ "--- ip6-localhost ping statistics ---\n" \ "1 packets transmitted, 1 packets received, 0% packet loss\n" \ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" #define pivot_root_trivial_usage \ "NEW_ROOT PUT_OLD" #define pivot_root_full_usage \ "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \ "the new root file system" #define poweroff_trivial_usage \ "[-d] [-n] [-f]" #define poweroff_full_usage \ "Halt and shut off power" \ "\n\nOptions:\n" \ " -d Delay interval for halting\n" \ " -n No call to sync()\n" \ " -f Force power off (don't go through init)" #define printenv_trivial_usage \ "[VARIABLES...]" #define printenv_full_usage \ "Print all or part of environment.\n" \ "If no environment VARIABLE specified, print them all." #define printf_trivial_usage \ "FORMAT [ARGUMENT...]" #define printf_full_usage \ "Format and print ARGUMENT(s) according to FORMAT,\n" \ "where FORMAT controls the output exactly as in C printf" #define printf_example_usage \ "$ printf \"Val=%d\\n\" 5\n" \ "Val=5\n" #if ENABLE_DESKTOP #define ps_trivial_usage \ "" #define ps_full_usage \ "Report process status" \ "\n\nOptions:" \ "\n -o col1,col2=header Select columns for display" \ #else /* !ENABLE_DESKTOP */ #if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE #define USAGE_PS "\nThis version of ps accepts no options" #else #define USAGE_PS "\nOptions:" #endif #define ps_trivial_usage \ "" #define ps_full_usage \ "Report process status\n" \ USAGE_PS \ USE_SELINUX( \ "\n -Z Show SE Linux context") \ USE_FEATURE_PS_WIDE( \ "\n w Wide output") #endif /* ENABLE_DESKTOP */ #define ps_example_usage \ "$ ps\n" \ " PID Uid Gid State Command\n" \ " 1 root root S init\n" \ " 2 root root S [kflushd]\n" \ " 3 root root S [kupdate]\n" \ " 4 root root S [kpiod]\n" \ " 5 root root S [kswapd]\n" \ " 742 andersen andersen S [bash]\n" \ " 743 andersen andersen S -bash\n" \ " 745 root root S [getty]\n" \ " 2990 andersen andersen R ps\n" #define pwd_trivial_usage \ "" #define pwd_full_usage \ "Print the full filename of the current working directory" #define pwd_example_usage \ "$ pwd\n" \ "/root\n" #define raidautorun_trivial_usage \ "DEVICE" #define raidautorun_full_usage \ "Tell the kernel to automatically search and start RAID arrays" #define raidautorun_example_usage \ "$ raidautorun /dev/md0" #define rdate_trivial_usage \ "[-sp] HOST" #define rdate_full_usage \ "Get and possibly set the system date and time from a remote HOST" \ "\n\nOptions:\n" \ " -s Set the system date and time (default)\n" \ " -p Print the date and time" #define readahead_trivial_usage \ "[FILE]..." #define readahead_full_usage \ "Preload FILE(s) in RAM cache so that subsequent reads for those" \ "files do not block on disk I/O" #define readlink_trivial_usage \ USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE" #define readlink_full_usage \ "Display the value of a symlink" \ USE_FEATURE_READLINK_FOLLOW( \ "\n\nOptions:\n" \ " -f Canonicalize by following all symlinks") #define readprofile_trivial_usage \ "[OPTIONS]..." #define readprofile_full_usage \ "Options:\n" \ " -m (Default: /boot/System.map)\n" \ " -p (Default: /proc/profile)\n" \ " -M Set the profiling multiplier to \n" \ " -i Print only info about the sampling step\n" \ " -v Print verbose data\n" \ " -a Print all symbols, even if count is 0\n" \ " -b Print individual histogram-bin counts\n" \ " -s Print individual counters within functions\n" \ " -r Reset all the counters (root only)\n" \ " -n Disable byte order auto-detection" #define realpath_trivial_usage \ "pathname ..." #define realpath_full_usage \ "Return the absolute pathnames of given argument" #define reboot_trivial_usage \ "[-d] [-n] [-f]" #define reboot_full_usage \ "Reboot the system" \ "\n\nOptions:\n" \ " -d Delay interval for rebooting\n" \ " -n No call to sync()\n" \ " -f Force reboot (don't go through init)" #define renice_trivial_usage \ "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]" #define renice_full_usage \ "Change priority of running processes" \ "\n\nOptions:\n" \ " -n Adjusts current nice value (smaller is faster)\n" \ " -p Process id(s) (default)\n" \ " -g Process group id(s)\n" \ " -u Process user name(s) and/or id(s)" #define reset_trivial_usage \ "" #define reset_full_usage \ "Reset the screen" #define resize_trivial_usage \ "" #define resize_full_usage \ "Resize the screen" #define rm_trivial_usage \ "[OPTION]... FILE..." #define rm_full_usage \ "Remove (unlink) the FILE(s). You may use '--' to\n" \ "indicate that all following arguments are non-options." \ "\n\nOptions:\n" \ " -i Always prompt before removing each destination\n" \ " -f Remove existing destinations, never prompt\n" \ " -r,-R Remove the contents of directories recursively" #define rm_example_usage \ "$ rm -rf /tmp/foo\n" #define rmdir_trivial_usage \ "[OPTION]... DIRECTORY..." #define rmdir_full_usage \ "Remove the DIRECTORY, if it is empty" #define rmdir_example_usage \ "# rmdir /tmp/foo\n" #define rmmod_trivial_usage \ "[OPTION]... [MODULE]..." #define rmmod_full_usage \ "Unload the specified kernel modules from the kernel" \ "\n\nOptions:\n" \ " -a Remove all unused modules (recursively)" #define rmmod_example_usage \ "$ rmmod tulip\n" #define route_trivial_usage \ "[{add|del|delete}]" #define route_full_usage \ "Edit the kernel's routing tables" \ "\n\nOptions:\n" \ " -n Dont resolve names\n" \ " -e Display other/more information\n" \ " -A inet" USE_FEATURE_IPV6("{6}") " Select address family" #define rpm_trivial_usage \ "-i -q[ildc]p package.rpm" #define rpm_full_usage \ "Manipulate RPM packages" \ "\n\nOptions:" \ "\n -i Install package" \ "\n -q Query package" \ "\n -p Query uninstalled package" \ "\n -i Show information" \ "\n -l List contents" \ "\n -d List documents" \ "\n -c List config files" #define rpm2cpio_trivial_usage \ "package.rpm" #define rpm2cpio_full_usage \ "Output a cpio archive of the rpm file" #define runcon_trivial_usage \ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \ " runcon CONTEXT COMMAND [args]" #define runcon_full_usage \ "runcon [-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \ "runcon CONTEXT COMMAND [args]\n" \ "Run a program in a different security context\n\n" \ " CONTEXT Complete security context\n" \ " -c, --compute Compute process transition context before modifying\n" \ " -t, --type=TYPE Type (for same role as parent)\n" \ " -u, --user=USER User identity\n" \ " -r, --role=ROLE Role\n" \ " -l, --range=RNG Levelrange" \ #define run_parts_trivial_usage \ "[-t] [-a ARG] [-u MASK] DIRECTORY" #define run_parts_full_usage \ "Run a bunch of scripts in a directory" \ "\n\nOptions:\n" \ " -t Prints what would be run, but does not actually run anything\n" \ " -a ARG Pass ARG as an argument for every program invoked\n" \ " -u MASK Set the umask to MASK before executing every program" #define runlevel_trivial_usage \ "[utmp]" #define runlevel_full_usage \ "Find the current and previous system runlevel.\n\n" \ "If no utmp file exists or if no runlevel record can be found,\n" \ "print \"unknown\"" #define runlevel_example_usage \ "$ runlevel /var/run/utmp\n" \ "N 2" #define runsv_trivial_usage \ "dir" #define runsv_full_usage \ "Start and monitor a service and optionally an appendant log service" #define runsvdir_trivial_usage \ "[-P] dir" #define runsvdir_full_usage \ "Start a runsv process for each subdirectory" #define rx_trivial_usage \ "FILE" #define rx_full_usage \ "Receive a file using the xmodem protocol" #define rx_example_usage \ "$ rx /tmp/foo\n" #define sed_trivial_usage \ "[-efinr] pattern [files...]" #define sed_full_usage \ "Options:\n" \ " -e script Add the script to the commands to be executed\n" \ " -f scriptfile Add script-file contents to the\n" \ " commands to be executed\n" \ " -i Edit files in-place\n" \ " -n Suppress automatic printing of pattern space\n" \ " -r Use extended regular expression syntax\n" \ "\n" \ "If no -e or -f is given, the first non-option argument is taken as the sed\n" \ "script to interpret. All remaining arguments are names of input files; if no\n" \ "input files are specified, then the standard input is read. Source files\n" \ "will not be modified unless -i option is given." #define sed_example_usage \ "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ "bar\n" #define selinuxenabled_trivial_usage #define selinuxenabled_full_usage #define seq_trivial_usage \ "[first [increment]] last" #define seq_full_usage \ "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \ "FIRST, INCREMENT default to 1" \ "\n\nArguments:\n" \ " LAST\n" \ " FIRST LAST\n" \ " FIRST INCREMENT LAST" #define setconsole_trivial_usage \ "[-r|--reset] [DEVICE]" #define setconsole_full_usage \ "Redirect system console output to DEVICE (default: /dev/tty)" \ "\n\nOptions:\n" \ " -r Reset output to /dev/console" #define setenforce_trivial_usage \ "[ Enforcing | Permissive | 1 | 0 ]" #define setenforce_full_usage #define setkeycodes_trivial_usage \ "SCANCODE KEYCODE ..." #define setkeycodes_full_usage \ "Set entries into the kernel's scancode-to-keycode map,\n" \ "allowing unusual keyboards to generate usable keycodes.\n\n" \ "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ "and KEYCODE is given in decimal" #define setkeycodes_example_usage \ "$ setkeycodes e030 127\n" #define setlogcons_trivial_usage \ "N" #define setlogcons_full_usage \ "Redirect the kernel output to console N (0 for current)" #define setsid_trivial_usage \ "program [arg ...]" #define setsid_full_usage \ "Run any program in a new session by calling setsid() before\n" \ "exec'ing the rest of its arguments. See setsid(2) for details." #define lash_trivial_usage \ "[FILE]...\n" \ "or: sh -c command [args]..." #define lash_full_usage \ "The BusyBox LAme SHell (command interpreter)" #define lash_notes_usage \ "This command does not yet have proper documentation.\n\n" \ "Use lash just as you would use any other shell. It properly handles pipes,\n" \ "redirects, job control, can be used as the shell for scripts, and has a\n" \ "sufficient set of builtins to do what is needed. It does not (yet) support\n" \ "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \ "use ash or bash. If you just need a very simple and extremely small shell,\n" \ "this will do the job." #define last_trivial_usage \ "" #define last_full_usage \ "Show listing of the last users that logged into the system" #define sha1sum_trivial_usage \ "[OPTION] [FILEs...]" \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") #define sha1sum_full_usage \ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \ "With no FILE, or when FILE is -, read standard input." \ "\n\nOptions:\n" \ USE_FEATURE_MD5_SHA1_SUM_CHECK( \ " -c Check SHA1 sums against given list\n" \ "\nThe following two options are useful only when verifying checksums:\n" \ " -s Don't output anything, status code shows success\n" \ " -w Warn about improperly formatted SHA1 checksum lines") #define sleep_trivial_usage \ USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...") #define sleep_full_usage \ SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \ USE_FEATURE_FANCY_SLEEP( \ "Pause for a time equal to the total of the args given, where each arg can\n" \ "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays") #define sleep_example_usage \ "$ sleep 2\n" \ "[2 second delay results]\n" \ USE_FEATURE_FANCY_SLEEP( \ "$ sleep 1d 3h 22m 8s\n" \ "[98528 second delay results]\n") #define sort_trivial_usage \ "[-nru" \ USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") \ "] [FILE]..." #define sort_full_usage \ "Sort lines of text in the specified files" \ "\n\nOptions:\n" \ USE_FEATURE_SORT_BIG( \ " -b Ignore leading blanks\n" \ " -c Check whether input is sorted\n" \ " -d Dictionary order (blank or alphanumeric only)\n" \ " -f Ignore case\n" \ " -g General numerical sort\n" \ " -i Ignore unprintable characters\n" \ " -k Specify sort key\n" \ " -M Sort month\n") \ " -n Sort numbers\n" \ USE_FEATURE_SORT_BIG( \ " -o Output to file\n" \ " -k Sort by key\n" \ " -t Use key separator other than whitespace\n") \ " -r Reverse sort order\n" \ USE_FEATURE_SORT_BIG( \ " -s Stable (don't sort ties alphabetically)\n") \ " -u Suppress duplicate lines" \ USE_FEATURE_SORT_BIG( \ "\n -z Input terminated by nulls, not newlines\n") \ USE_FEATURE_SORT_BIG( \ " -mST Ignored for GNU compatibility") \ "" #define sort_example_usage \ "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ "a\n" \ "b\n" \ "c\n" \ "d\n" \ "e\n" \ "f\n" \ USE_FEATURE_SORT_BIG( \ "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \ "d 2\n" \ "b 2\n" \ "c 3\n" \ ) \ "" #define split_trivial_usage \ "[OPTION] [INPUT [PREFIX]]" #define split_full_usage \ "Options:" \ "\n -blah XXX: Fixme: usage.h" #define start_stop_daemon_trivial_usage \ "[OPTIONS] [--start|--stop] ... [-- arguments...]" #define start_stop_daemon_full_usage \ "Start and stop services" \ "\n\nOptions:" \ "\n -S|--start Start" \ "\n -K|--stop Stop" \ "\n -a|--startas Starts process specified by pathname" \ "\n -b|--background Force process into background" \ "\n -u|--user | Stop this user's processes" \ "\n -x|--exec Program to either start or check" \ "\n -m|--make-pidfile Create the -p file and enter pid in it" \ "\n -n|--name Stop processes with this name" \ "\n -p|--pidfile Save or load pid using a pid-file" \ "\n -q|--quiet Be quiet" \ USE_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -o|--oknodo Exit status 0 if nothing done" \ "\n -v|--verbose Be verbose" \ "\n -N|--nicelevel Add N to process's nice level" \ ) \ "\n -s|--signal Signal to send (default TERM)" \ "\n -c|--chuid [:[]] Change to specified user/group" #define stat_trivial_usage \ "[OPTION] FILE..." #define stat_full_usage \ "Display file (default) or filesystem status" \ "\n\nOptions:\n" \ USE_FEATURE_STAT_FORMAT( \ " -c fmt Use the specified format\n") \ " -f Display filesystem status\n" \ " -L,-l Dereference links\n" \ " -t Display info in terse form" \ USE_SELINUX( \ "\n -Z Print security context" \ ) \ USE_FEATURE_STAT_FORMAT( \ "\n\nValid format sequences for files:\n" \ " %a Access rights in octal\n" \ " %A Access rights in human readable form\n" \ " %b Number of blocks allocated (see %B)\n" \ " %B The size in bytes of each block reported by %b\n" \ " %d Device number in decimal\n" \ " %D Device number in hex\n" \ " %f Raw mode in hex\n" \ " %F File type\n" \ " %g Group ID of owner\n" \ " %G Group name of owner\n" \ " %h Number of hard links\n" \ " %i Inode number\n" \ " %n File name\n" \ " %N Quoted file name with dereference if symlink\n" \ " %o I/O block size\n" \ " %s Total size, in bytes\n" \ " %t Major device type in hex\n" \ " %T Minor device type in hex\n" \ " %u User ID of owner\n" \ " %U User name of owner\n" \ " %x Time of last access\n" \ " %X Time of last access as seconds since Epoch\n" \ " %y Time of last modification\n" \ " %Y Time of last modification as seconds since Epoch\n" \ " %z Time of last change\n" \ " %Z Time of last change as seconds since Epoch\n" \ "\nValid format sequences for file systems:\n" \ " %a Free blocks available to non-superuser\n" \ " %b Total data blocks in file system\n" \ " %c Total file nodes in file system\n" \ " %d Free file nodes in file system\n" \ " %f Free blocks in file system\n" \ USE_SELINUX( \ " %C Security context in SELinux\n" \ ) \ " %i File System ID in hex\n" \ " %l Maximum length of filenames\n" \ " %n File name\n" \ " %s Block size (for faster transfers)\n" \ " %S Fundamental block size (for block counts)\n" \ " %t Type in hex\n" \ " %T Type in human readable form" \ ) #define strings_trivial_usage \ "[-afo] [-n length] [file ... ]" #define strings_full_usage \ "Display printable strings in a binary file" \ "\n\nOptions:" \ "\n -a Scan the whole files (this is the default)" \ "\n -f Precede each string with the name of the file where it was found" \ "\n -n N Specifies that at least N characters forms a sequence (default 4)" \ "\n -o Each string is preceded by its decimal offset in the file" #define stty_trivial_usage \ "[-a|g] [-F DEVICE] [SETTING]..." #define stty_full_usage \ "Without arguments, prints baud rate, line discipline,\n" \ "and deviations from stty sane" \ "\n\nOptions:" \ "\n -F DEVICE Open device instead of stdin" \ "\n -a Print all current settings in human-readable form" \ "\n -g Print in stty-readable form" \ "\n [SETTING] See manpage" #define su_trivial_usage \ "[OPTION]... [-] [username]" #define su_full_usage \ "Change user id or become root" \ "\n\nOptions:" \ "\n -p, -m Preserve environment" \ "\n -c Command to pass to 'sh -c'" \ "\n -s Shell to use instead of default shell" #define sulogin_trivial_usage \ "[OPTION]... [tty-device]" #define sulogin_full_usage \ "Single user login" \ "\n\nOptions:" \ "\n -t Timeout" #define sum_trivial_usage \ "[rs] [files...]" #define sum_full_usage \ "Checksum and count the blocks in a file" \ "\n\nOptions:\n" \ " -r Use BSD sum algorithm (1K blocks)\n" \ " -s Use System V sum algorithm (512byte blocks)" #define sv_trivial_usage \ "[-v] [-w sec] command service..." #define sv_full_usage \ "Report the current status and control the state of services " \ "monitored by the runsv supervisor" #define svlogd_trivial_usage \ "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..." #define svlogd_full_usage \ "Continuously read log data from standard input, optionally " \ "filter log messages, and write the data to one or more automatically " \ "rotated logs" #define swapoff_trivial_usage \ "[-a] [DEVICE]" #define swapoff_full_usage \ "Stop swapping virtual memory pages on DEVICE" \ "\n\nOptions:\n" \ " -a Stop swapping on all swap devices" #define swapon_trivial_usage \ "[-a] [DEVICE]" #define swapon_full_usage \ "Start swapping virtual memory pages on DEVICE" \ "\n\nOptions:\n" \ " -a Start swapping on all swap devices" #define switch_root_trivial_usage \ "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" #define switch_root_full_usage \ "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ "and exec NEW_INIT" \ "\n\nOptions:\n" \ " -c Redirect console to device on new root" #define sync_trivial_usage \ "" #define sync_full_usage \ "Write all buffered filesystem blocks to disk" #define sysctl_trivial_usage \ "[OPTIONS]... [VALUE]..." #define sysctl_full_usage \ "Configure kernel parameters at runtime" \ "\n\nOptions:\n" \ " -n Use this option to disable printing of the key name when printing values\n" \ " -w Use this option when you want to change a sysctl setting\n" \ " -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \ " -a Display all values currently available\n" \ " -A Display all values currently available in table form" #define sysctl_example_usage \ "sysctl [-n] variable ...\n" \ "sysctl [-n] -w variable=value ...\n" \ "sysctl [-n] -a\n" \ "sysctl [-n] -p (default /etc/sysctl.conf)\n" \ "sysctl [-n] -A\n" #define syslogd_trivial_usage \ "[OPTION]..." #define syslogd_full_usage \ "System logging utility.\n" \ "Note that this version of syslogd ignores /etc/syslog.conf." \ "\n\nOptions:" \ "\n -n Run as foreground process" \ "\n -O FILE Use an alternate log file (default=/var/log/messages)" \ "\n -l n Sets the local log level of messages to n" \ "\n -S Make logging output smaller" \ USE_FEATURE_ROTATE_LOGFILE( \ "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \ "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \ USE_FEATURE_REMOTE_LOG( \ "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \ "\n -L Log locally and via network logging (default is network only)") \ USE_FEATURE_IPC_SYSLOG( \ "\n -C[size(KiB)] Log to a shared mem buffer (read the buffer using logread)") /* NB: -Csize shouldn't have space (because size is optional) */ /* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */ #define syslogd_example_usage \ "$ syslogd -R masterlog:514\n" \ "$ syslogd -R 192.168.1.1:601\n" #define tail_trivial_usage \ "[OPTION]... [FILE]..." #define tail_full_usage \ "Print last 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ "file name. With no FILE, or when FILE is -, read standard input." \ "\n\nOptions:" \ USE_FEATURE_FANCY_TAIL( \ "\n -c N[kbm] Output the last N bytes") \ "\n -n N[kbm] Print last N lines instead of last 10" \ "\n -f Output data as the file grows" \ USE_FEATURE_FANCY_TAIL( \ "\n -q Never output headers giving file names" \ "\n -s SEC Wait SEC seconds between reads with -f" \ "\n -v Always output headers giving file names" \ "\n\n" \ "If the first character of N (bytes or lines) is a '+', output begins with\n" \ "the Nth item from the start of each file, otherwise, print the last N items\n" \ "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) #define tail_example_usage \ "$ tail -n 1 /etc/resolv.conf\n" \ "nameserver 10.0.0.1\n" #define tar_trivial_usage \ "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \ USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \ USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \ USE_FEATURE_TAR_FROM("[-X FILE] ") \ "[-f TARFILE] [-C DIR] [FILE(s)] ..." #define tar_full_usage \ "Create, extract, or list files from a tar file" \ "\n\nOptions:\n" \ USE_FEATURE_TAR_CREATE( \ " c Create\n") \ " x Extract\n" \ " t List\n" \ "\nArchive format selection:\n" \ USE_FEATURE_TAR_GZIP( \ " z Filter the archive through gzip\n") \ USE_FEATURE_TAR_BZIP2( \ " j Filter the archive through bzip2\n") \ USE_FEATURE_TAR_LZMA( \ " a Filter the archive through lzma\n") \ USE_FEATURE_TAR_COMPRESS( \ " Z Filter the archive through compress\n") \ "\nFile selection:\n" \ " f Name of TARFILE or \"-\" for stdin\n" \ " O Extract to stdout\n" \ USE_FEATURE_TAR_FROM( \ " exclude File to exclude\n" \ " X File with names to exclude\n") \ " C Change to directory DIR before operation\n" \ " v Verbosely list files processed" #define tar_example_usage \ "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ "$ tar -cf /tmp/tarball.tar /usr/local\n" #define taskset_trivial_usage \ "[OPTIONS] [mask] [pid | command [arg]...]" #define taskset_full_usage \ "Set or get CPU affinity" \ "\n\nOptions:\n" \ " -p Operate on an existing PID" #define taskset_example_usage \ "$ taskset 0x7 ./dgemm_test&\n" \ "$ taskset -p 0x1 $!\n" \ "pid 4790's current affinity mask: 7\n" \ "pid 4790's new affinity mask: 1\n" \ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ "pid 6671's current affinity mask: 1\n" \ "pid 6671's new affinity mask: 1\n" \ "$ taskset -p 1\n" \ "pid 1's current affinity mask: 3\n" #define tee_trivial_usage \ "[OPTION]... [FILE]..." #define tee_full_usage \ "Copy standard input to each FILE, and also to standard output" \ "\n\nOptions:\n" \ " -a Append to the given FILEs, do not overwrite\n" \ " -i Ignore interrupt signals (SIGINT)" #define tee_example_usage \ "$ echo \"Hello\" | tee /tmp/foo\n" \ "$ cat /tmp/foo\n" \ "Hello\n" #ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN #define telnet_trivial_usage \ "[-a] [-l USER] HOST [PORT]" #define telnet_full_usage \ "Connect to remote telnet server" \ "\n\nOptions:\n" \ " -a Attempt an automatic login with the USER variable\n" \ " -l USER Attempt an automatic login with the USER argument\n" \ " HOST The official name, alias or the IP address of the\n" \ " remote host\n" \ " PORT The remote port number to connect to. If it is not\n" \ " specified, the default telnet (23) port is used." #else #define telnet_trivial_usage \ "HOST [PORT]" #define telnet_full_usage \ "Connect to remote telnet server" #endif #define telnetd_trivial_usage \ "[OPTION]" #define telnetd_full_usage \ "Handle incoming telnet connections" \ SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \ "\n\nOptions:" \ "\n -l LOGIN Exec LOGIN on connect" \ "\n -f issue_file Display issue_file instead of /etc/issue" \ USE_FEATURE_TELNETD_STANDALONE( \ "\n -p PORT Port to listen to" \ "\n -b ADDR Address to bind to" \ "\n -F Stay in foreground" \ "\n -i Run as inetd subservice" \ ) #define test_trivial_usage \ "EXPRESSION\n or [ EXPRESSION ]" #define test_full_usage \ "Check file types and compares values returning an exit code\n" \ "determined by the value of EXPRESSION" #define test_example_usage \ "$ test 1 -eq 2\n" \ "$ echo $?\n" \ "1\n" \ "$ test 1 -eq 1\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /etc ]\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /junk ]\n" \ "$ echo $?\n" \ "1\n" #define tftp_trivial_usage \ "[OPTION]... HOST [PORT]" #define tftp_full_usage \ "Transfer a file from/to tftp server using \"octet\" mode" \ "\n\nOptions:" \ "\n -l FILE Local FILE" \ "\n -r FILE Remote FILE" \ USE_FEATURE_TFTP_GET( \ "\n -g Get file" \ ) \ USE_FEATURE_TFTP_PUT( \ "\n -p Put file" \ ) \ USE_FEATURE_TFTP_BLOCKSIZE( \ "\n -b SIZE Transfer blocks of SIZE octets" \ ) #define time_trivial_usage \ "[OPTION]... COMMAND [ARGS...]" #define time_full_usage \ "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ "COMMAND's resource usage information is displayed." \ "\n\nOptions:\n" \ " -v Display verbose resource usage information" #define top_trivial_usage \ "[-b] [-n count] [-d seconds]" #define top_full_usage \ "Provide a view of process activity in real time.\n" \ "Read the status of all processes from /proc each \n" \ "and show the status for however many processes will fit on the screen." #define touch_trivial_usage \ "[-c] FILE [FILE ...]" #define touch_full_usage \ "Update the last-modified date on the given FILE[s]" \ "\n\nOptions:\n" \ " -c Do not create any files" #define touch_example_usage \ "$ ls -l /tmp/foo\n" \ "/bin/ls: /tmp/foo: No such file or directory\n" \ "$ touch /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" #define tr_trivial_usage \ "[-cds] STRING1 [STRING2]" #define tr_full_usage \ "Translate, squeeze, and/or delete characters from\n" \ "standard input, writing to standard output" \ "\n\nOptions:\n" \ " -c Take complement of STRING1\n" \ " -d Delete input characters coded STRING1\n" \ " -s Squeeze multiple output characters of STRING2 into one character" #define tr_example_usage \ "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ "hello world\n" #define traceroute_trivial_usage \ "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \ " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ " [-z pausemsecs] host [data size]" #define traceroute_full_usage \ "Trace the route ip packets follow going to \"host\"" \ "\n\nOptions:\n" \ " -F Set the don't fragment bit\n" \ " -I Use ICMP ECHO instead of UDP datagrams\n" \ " -l Display the ttl value of the returned packet\n" \ " -d Set SO_DEBUG options to socket\n" \ " -n Print hop addresses numerically rather than symbolically\n" \ " -r Bypass the normal routing tables and send directly to a host\n" \ " -v Verbose output\n" \ " -m max_ttl Set the max time-to-live (max number of hops)\n" \ " -p port# Set the base UDP port number used in probes\n" \ " (default is 33434)\n" \ " -q nqueries Set the number of probes per 'ttl' to nqueries\n" \ " (default is 3)\n" \ " -s src_addr Use the following IP address as the source address\n" \ " -t tos Set the type-of-service in probe packets to the following value\n" \ " (default 0)\n" \ " -w wait Set the time (in seconds) to wait for a response to a probe\n" \ " (default 3 sec)\n" \ " -g Specify a loose source route gateway (8 maximum)" #define true_trivial_usage \ "" #define true_full_usage \ "Return an exit code of TRUE (0)" #define true_example_usage \ "$ true\n" \ "$ echo $?\n" \ "0\n" #define tty_trivial_usage \ "" #define tty_full_usage \ "Print the file name of the terminal connected to standard input" \ USE_INCLUDE_SUSv2( \ "\n\nOptions:\n" \ " -s Print nothing, only return an exit status") #define tty_example_usage \ "$ tty\n" \ "/dev/tty2\n" #define tune2fs_trivial_usage \ "[-c max-mounts-count] [-e errors-behavior] [-g group] " \ "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \ "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \ "[-r reserved-blocks-count] [-u user] [-C mount-count] " \ "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \ "[-T last-check-time] [-U UUID] device" #define tune2fs_full_usage \ "Adjust filesystem options on ext[23] filesystems" #define udhcpc_trivial_usage \ "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]" #define udhcpc_full_usage \ " -V,--vendorclass=CLASSID Set vendor class identifier\n" \ " -i,--interface=INTERFACE Interface to use (default: eth0)\n" \ " -H,-h,--hostname=HOSTNAME Client hostname\n" \ " -c,--clientid=CLIENTID Set client identifier\n" \ " -C,--clientid-none Suppress default client identifier\n" \ " -p,--pidfile=file Store process ID of daemon in file\n" \ " -r,--request=IP IP address to request (default: none)\n" \ " -s,--script=file Run file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \ " -t,--retries=NUM Send up to NUM request packets\n"\ " -f,--foreground Do not fork after getting lease\n" \ " -b,--background Fork to background if lease cannot be immediately negotiated\n" \ " -n,--now Exit with failure if lease cannot be immediately negotiated\n" \ " -q,--quit Quit after obtaining lease\n" \ " -R,--release Release IP on quit\n" \ " -v,--version Display version" \ #define udhcpd_trivial_usage \ "[configfile]\n" \ #define udhcpd_full_usage \ "" #define umount_trivial_usage \ "[flags] FILESYSTEM|DIRECTORY" #define umount_full_usage \ "Unmount file systems" \ "\n\nOptions:\n" \ USE_FEATURE_UMOUNT_ALL( \ "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab")) \ USE_FEATURE_MTAB_SUPPORT( \ "\n -n Don't erase /etc/mtab entries") \ "\n -r Try to remount devices as read-only if mount is busy" \ "\n -l Lazy umount (detach filesystem)" \ "\n -f Force umount (i.e., unreachable NFS server)" \ USE_FEATURE_MOUNT_LOOP( \ "\n -D Do not free loop device (if a loop device has been used)") #define umount_example_usage \ "$ umount /dev/hdc1\n" #define uname_trivial_usage \ "[OPTION]..." #define uname_full_usage \ "Print certain system information. With no OPTION, same as -s." \ "\n\nOptions:\n" \ " -a Print all information\n" \ " -m The machine (hardware) type\n" \ " -n Print the machine's network node hostname\n" \ " -r Print the operating system release\n" \ " -s Print the operating system name\n" \ " -p Print the host processor type\n" \ " -v Print the operating system version" #define uname_example_usage \ "$ uname -a\n" \ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" #define uncompress_trivial_usage \ "[-c] [-f] [ name ... ]" #define uncompress_full_usage \ "Uncompress .Z file[s]" \ "\n\nOptions:\n" \ " -c Extract to stdout\n" \ " -f Force overwrite an existing file" #define uniq_trivial_usage \ "[-fscdu]... [INPUT [OUTPUT]]" #define uniq_full_usage \ "Discard all but one of successive identical lines from INPUT\n" \ "(or standard input), writing to OUTPUT (or standard output)" \ "\n\nOptions:\n" \ " -c Prefix lines by the number of occurrences\n" \ " -d Only print duplicate lines\n" \ " -u Only print unique lines\n" \ " -f N Skip the first N fields\n" \ " -s N Skip the first N chars (after any skipped fields)" #define uniq_example_usage \ "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ "a\n" \ "b\n" \ "c\n" #define unix2dos_trivial_usage \ "[option] [FILE]" #define unix2dos_full_usage \ "Convert FILE from unix format to dos format. When no option\n" \ "is given, the input is converted to the opposite output format.\n" \ "When no file is given, use stdin for input and stdout for output." \ "\n\nOptions:\n" \ " -u Output will be in UNIX format\n" \ " -d Output will be in DOS format" #define unzip_trivial_usage \ "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" #define unzip_full_usage \ "Extract files from ZIP archives" \ "\n\nOptions:\n" \ " -l List archive contents (short form)\n" \ " -n Never overwrite existing files (default)\n" \ " -o Overwrite files without prompting\n" \ " -p Send output to stdout\n" \ " -q Be quiet\n" \ " -x Exclude these files\n" \ " -d Extract files into this directory" #define uptime_trivial_usage \ "" #define uptime_full_usage \ "Display the time since the last boot" #define uptime_example_usage \ "$ uptime\n" \ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" #define usleep_trivial_usage \ "N" #define usleep_full_usage \ "Pause for N microseconds" #define usleep_example_usage \ "$ usleep 1000000\n" \ "[pauses for 1 second]\n" #define uudecode_trivial_usage \ "[FILE]..." #define uudecode_full_usage \ "Uudecode a file" \ "\n\nOptions:\n" \ " -o FILE Direct output to FILE" #define uudecode_example_usage \ "$ uudecode -o busybox busybox.uu\n" \ "$ ls -l busybox\n" \ "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" #define uuencode_trivial_usage \ "[OPTION] [INFILE] REMOTEFILE" #define uuencode_full_usage \ "Uuencode a file" \ "\n\nOptions:\n" \ " -m Use base64 encoding per RFC1521" #define uuencode_example_usage \ "$ uuencode busybox busybox\n" \ "begin 755 busybox\n" \ "\n" \ "$ uudecode busybox busybox > busybox.uu\n" \ "$\n" #define vconfig_trivial_usage \ "COMMAND [OPTIONS] ..." #define vconfig_full_usage \ "Create and remove virtual ethernet devices" \ "\n\nOptions:\n" \ " add [interface-name] [vlan_id]\n" \ " rem [vlan-name]\n" \ " set_flag [interface-name] [flag-num] [0 | 1]\n" \ " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ " set_name_type [name-type]" #define vi_trivial_usage \ "[OPTION] [FILE]..." #define vi_full_usage \ "Edit FILE" \ "\n\nOptions:\n" \ " -R Read-only - do not write to the file" #define vlock_trivial_usage \ "[OPTIONS]" #define vlock_full_usage \ "Lock a virtual terminal. A password is required to unlock." \ "\n\nOptions:\n" \ " -a Lock all VTs" #define watch_trivial_usage \ "[-n ] [-t] COMMAND..." #define watch_full_usage \ "Execute a program periodically" \ "\n\nOptions:\n" \ " -n Loop period in seconds - default is 2\n" \ " -t Don't print header" #define watch_example_usage \ "$ watch date\n" \ "Mon Dec 17 10:31:40 GMT 2000\n" \ "Mon Dec 17 10:31:42 GMT 2000\n" \ "Mon Dec 17 10:31:44 GMT 2000" #define watchdog_trivial_usage \ "[-t ] [-F] DEV" #define watchdog_full_usage \ "Periodically write to watchdog device DEV" \ "\n\nOptions:\n" \ " -t Timer period in seconds - default is 30\n" \ " -F Stay in the foreground and don't fork" #define wc_trivial_usage \ "[OPTION]... [FILE]..." #define wc_full_usage \ "Print line, word, and byte counts for each FILE, and a total line if\n" \ "more than one FILE is specified. With no FILE, read standard input." \ "\n\nOptions:\n" \ " -c Print the byte counts\n" \ " -l Print the newline counts\n" \ " -L Print the length of the longest line\n" \ " -w Print the word counts" #define wc_example_usage \ "$ wc /etc/passwd\n" \ " 31 46 1365 /etc/passwd\n" #define wget_trivial_usage \ "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \ " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \ " [-U|--user-agent agent] url" #define wget_full_usage \ "Retrieve files via HTTP or FTP" \ "\n\nOptions:\n" \ " -c Continue retrieval of aborted transfers\n" \ " -q Quiet mode - do not print\n" \ " -P Set directory prefix to DIR\n" \ " -O Save to filename ('-' for stdout)\n" \ " -U Adjust 'User-Agent' field\n" \ " -Y Use proxy ('on' or 'off')" #define which_trivial_usage \ "[COMMAND ...]" #define which_full_usage \ "Locate a COMMAND" #define which_example_usage \ "$ which login\n" \ "/bin/login\n" #define who_trivial_usage \ " " #define who_full_usage \ "Print the current user names and related information" #define whoami_trivial_usage \ "" #define whoami_full_usage \ "Print the user name associated with the current effective user id" #define xargs_trivial_usage \ "[OPTIONS] [COMMAND] [ARGS...]" #define xargs_full_usage \ "Execute COMMAND on every item given by standard input" \ "\n\nOptions:\n" \ USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ " -p Prompt the user about whether to run each command\n") \ " -r Do not run command for empty read lines\n" \ USE_FEATURE_XARGS_SUPPORT_TERMOPT( \ " -x Exit if the size is exceeded\n") \ USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \ " -0 Input filenames are terminated by a null character\n") \ " -t Print the command line on stderr before executing it" #define xargs_example_usage \ "$ ls | xargs gzip\n" \ "$ find . -name '*.c' -print | xargs rm\n" #define yes_trivial_usage \ "[OPTION]... [STRING]..." #define yes_full_usage \ "Repeatedly output a line with all specified STRING(s), or 'y'" #define zcat_trivial_usage \ "FILE" #define zcat_full_usage \ "Uncompress to stdout" #define zcip_trivial_usage \ "[OPTIONS] ifname script" #define zcip_full_usage \ "Manage a ZeroConf IPv4 link-local address" \ "\n\nOptions:\n" \ " -f Foreground mode\n" \ " -q Quit after address (no daemon)\n" \ " -r 169.254.x.x Request this address first\n" \ " -v Verbose" #endif /* __BB_USAGE_H__ */