#define addgroup_trivial_usage \ "[OPTIONS] group_name [user_name]" #define addgroup_full_usage \ "Adds a group to the system" \ "Options:\n" \ "\t-g\t\tspecify gid\n" #define adduser_trivial_usage \ "[OPTIONS] user_name" #define adduser_full_usage \ "Adds a user to the system" \ "Options:\n" \ "\t-h DIR\t\tAssign home directory DIR\n" \ "\t-g GECOS\t\tAssign gecos field GECOS\n" \ "\t-s SHELL\t\tAssign login shell SHELL\n" \ "\t-G\t\tAdd the user to existing group GROUP\n" \ "\t-S\t\tcreate a system user (ignored)\n" \ "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \ "\t-H\t\tDo not create the home directory\n" #define adjtimex_trivial_usage \ "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" #define adjtimex_full_usage \ "Reads and optionally sets system timebase parameters.\n" \ "See adjtimex(2).\n\n" \ "Options:\n" \ "\t-q\t\tquiet mode - do not print\n" \ "\t-o offset\ttime offset, microseconds\n" \ "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \ "\t\t\t(positive values make the system clock run fast)\n" \ "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \ "\t-p timeconstant\n" #define ar_trivial_usage \ "-[ov][ptx] ARCHIVE FILES" #define ar_full_usage \ "Extract or list FILES from an ar archive.\n\n" \ "Options:\n" \ "\t-o\t\tpreserve original dates\n" \ "\t-p\t\textract to stdout\n" \ "\t-t\t\tlist\n" \ "\t-x\t\textract\n" \ "\t-v\t\tverbosely list files processed\n" #define arping_trivial_usage \ "[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n" #define arping_full_usage \ "Ping hosts by ARP requests/replies.\n\n" \ "Options:\n" \ "\t-f\t\tQuit on first ARP reply\n" \ "\t-q\t\tBe quiet\n" \ "\t-b\t\tKeep broadcasting, don't go unicast\n" \ "\t-D\t\tDuplicated address detection mode\n" \ "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \ "\t-A\t\tARP answer mode, update your neighbours\n" \ "\t-c count\tStop after sending count ARP request packets\n" \ "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \ "\t-I device\tOutgoing interface name, default is eth0\n" \ "\t-s sender\tSet specific sender IP address\n" \ "\ttarget\t\tTarget IP address of ARP request\n" #define awk_trivial_usage \ "[-v var=val][-F sep] { -f progname | 'programtext' } [FILE ...]" #define awk_full_usage \ "Options:\n" \ "\t-v var=val\tassign value 'val' to variable 'var'\n" \ "\t-F sep\t\tuse 'sep' as field separator\n" \ "\t-f progname\tread program source from file 'progname'\n" #define basename_trivial_usage \ "FILE [SUFFIX]" #define basename_full_usage \ "Strips directory path and suffixes from FILE.\n" \ "If specified, also removes any trailing SUFFIX." #define basename_example_usage \ "$ basename /usr/local/bin/foo\n" \ "foo\n" \ "$ basename /usr/local/bin/\n" \ "bin\n" \ "$ basename /foo/bar.txt .txt\n" \ "bar" #define bunzip2_trivial_usage \ "[OPTION]... [FILE]" #define bunzip2_full_usage \ "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \ "Options:\n" \ "\t-c\tWrite output to standard output\n" \ "\t-f\tForce" #define bzcat_trivial_usage \ "FILE" #define bzcat_full_usage \ "Uncompress to stdout." #define cal_trivial_usage \ "[-jy] [[month] year]" #define cal_full_usage \ "Display a calendar.\n" \ "\nOptions:\n" \ "\t-j\tUse julian dates.\n" \ "\t-y\tDisplay the entire year." #define cat_trivial_usage \ "[-u] [FILE]..." #define cat_full_usage \ "Concatenates FILE(s) and prints them to stdout.\n\n" \ "Options:\n" \ "\t-u\tignored since unbuffered i/o is always used" #define cat_example_usage \ "$ cat /proc/uptime\n" \ "110716.72 17.67" #define chgrp_trivial_usage \ "[OPTION]... GROUP FILE..." #define chgrp_full_usage \ "Change the group membership of each FILE to GROUP.\n" \ "\nOptions:\n" \ "\t-R\tChanges files and directories recursively." #define chgrp_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chgrp root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" #define chmod_trivial_usage \ "[-R] MODE[,MODE]... FILE..." #define chmod_full_usage \ "Each MODE is one or more of the letters ugoa, one of the\n" \ "symbols +-= and one or more of the letters rwxst.\n\n" \ "Options:\n" \ "\t-R\tChanges files and directories recursively." #define chmod_example_usage \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ "$ chmod u+x /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ "$ chmod 444 /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" #define chown_trivial_usage \ "[ -Rh ]... OWNER[<.|:>[GROUP]] FILE..." #define chown_full_usage \ "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \ "\nOptions:\n" \ "\t-R\tChanges files and directories recursively.\n" \ "\t-h\tDo not dereference symbolic links." #define chown_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root.root /tmp/foo\n" \ "ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" #define chroot_trivial_usage \ "NEWROOT [COMMAND...]" #define chroot_full_usage \ "Run COMMAND with root directory set to NEWROOT." #define chroot_example_usage \ "$ ls -l /bin/ls\n" \ "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ "$ mount /dev/hdc1 /mnt -t minix\n" \ "$ chroot /mnt\n" \ "$ ls -l /bin/ls\n" \ "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" #define chvt_trivial_usage \ "N" #define chvt_full_usage \ "Changes the foreground virtual terminal to /dev/ttyN" #define clear_trivial_usage \ "" #define clear_full_usage \ "Clear screen." #define cmp_trivial_usage \ "[OPTION]... FILE1 [FILE2]" #define cmp_full_usage \ "Compare files.\n\n" \ "Options:\n" \ "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \ "\t\t for all differing bytes.\n" \ "\t-s\tquiet mode - do not print" #define cp_trivial_usage \ "[OPTION]... SOURCE DEST" #define cp_full_usage \ "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \ "\n" \ "\t-a\tSame as -dpR\n" \ "\t-d\tPreserves links\n" \ "\t-p\tPreserves file attributes if possible\n" \ "\t-f\tforce (implied; ignored) - always set\n" \ "\t-i\tinteractive, prompt before overwrite\n" \ "\t-R,-r\tCopies directories recursively" #define cpio_trivial_usage \ "-[dimtuv][F cpiofile]" #define cpio_full_usage \ "Extract or list files from a cpio archive\n" \ "Main operation mode:\n" \ "\td\t\tmake leading directories\n" \ "\ti\t\textract\n" \ "\tm\t\tpreserve mtime\n" \ "\tt\t\tlist\n" \ "\tu\t\tunconditional overwrite\n" \ "\tF\t\tinput from file" #define crond_trivial_usage \ "-d[#] -c -f -b" #define crond_full_usage \ "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \ "\t-d num\tdebug level\n" \ "\t-l num\tlog level (8 - default)\n" \ "\t-S\tlog to syslod (default)\n" \ "\t-L file\tlog to file\n" \ "\t-f\trun in fordeground\n" \ "\t-b\trun in background (default)\n" \ "\t-c dir\tworking dir" #define crontab_trivial_usage \ "crontab [-c dir] {file|-}|[-u|-l|-e|-d user]" #define crontab_full_usage \ "\tfile replace crontab from file\n" \ "\t- replace crontab from stdin\n" \ "\t-u user specify user\n" \ "\t-l [user] list crontab for user\n" \ "\t-e [user] edit crontab for user\n" \ "\t-d [user] delete crontab for user\n" \ "\t-c dir specify crontab directory" #define cut_trivial_usage \ "[OPTION]... [FILE]..." #define cut_full_usage \ "Prints selected fields from each input FILE to standard output.\n\n" \ "Options:\n" \ "\t-b LIST\t\tOutput only bytes from LIST\n" \ "\t-c LIST\t\tOutput only characters from LIST\n" \ "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \ "\t-s\t\tOutput only the lines containing delimiter\n" \ "\t-f N\t\tPrint only these fields\n" \ "\t-n\t\tIgnored" #define cut_example_usage \ "$ echo "Hello world" | cut -f 1 -d ' '\n" \ "Hello\n" \ "$ echo "Hello world" | cut -f 2 -d ' '\n" \ "world\n" #ifdef CONFIG_FEATURE_DATE_ISOFMT #define USAGE_DATE_ISOFMT(a) a #else #define USAGE_DATE_ISOFMT(a) #endif #define date_trivial_usage \ "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]" #define date_full_usage \ "Displays the current time in the given FORMAT, or sets the system date.\n" \ "\nOptions:\n" \ "\t-R\t\tOutputs RFC-822 compliant date string\n" \ "\t-d STRING\tDisplays time described by STRING, not `now'\n" \ USAGE_DATE_ISOFMT("\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string.\n" \ "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \ "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \ "\t\t\ttime to the indicated precision.\n") \ "\t-s\t\tSets time described by STRING\n" \ "\t-u\t\tPrints or sets Coordinated Universal Time" #define date_example_usage \ "$ date\n" \ "Wed Apr 12 18:52:41 MDT 2000\n" #define dc_trivial_usage \ "expression ..." #define dc_full_usage \ "This is a Tiny RPN calculator that understands the\n" \ "following operations: +, add, -, sub, *, mul, /, div, %, mod, "\ "**, exp, and, or, not, eor.\n" \ "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \ "\nOptions:\n" \ "p - Prints the value on the top of the stack, without altering the stack.\n" \ "f - Prints the entire contents of the stack without altering anything.\n" \ "o - Pops the value off the top of the stack and uses it to set the output radix.\n" \ " Only 10 and 16 are supported.\n" #define dc_example_usage \ "$ dc 2 2 +\n" \ "4\n" \ "$ dc 8 8 * 2 2 + /\n" \ "16\n" \ "$ dc 0 1 and\n" \ "0\n" \ "$ dc 0 1 or\n" \ "1\n" \ "$ echo 72 9 div 8 mul | dc\n" \ "64\n" #define dd_trivial_usage \ "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \ "\t [seek=N] [conv=notrunc|noerror|sync]" #define dd_full_usage \ "Copy a file, converting and formatting according to options\n\n" \ "\tif=FILE\t\tread from FILE instead of stdin\n" \ "\tof=FILE\t\twrite to FILE instead of stdout\n" \ "\tbs=N\t\tread and write N bytes at a time\n" \ "\tcount=N\t\tcopy only N input blocks\n" \ "\tskip=N\t\tskip N input blocks\n" \ "\tseek=N\t\tskip N output blocks\n" \ "\tconv=notrunc\tdon't truncate output file\n" \ "\tconv=noerror\tcontinue after read errors\n" \ "\tconv=sync\tpad blocks with zeros\n" \ "\n" \ "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \ "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)." #define dd_example_usage \ "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ "4+0 records in\n" \ "4+0 records out\n" #define deallocvt_trivial_usage \ "[N]" #define deallocvt_full_usage \ "Deallocate unused virtual terminal /dev/ttyN" #define delgroup_trivial_usage \ "GROUP" #define delgroup_full_usage \ "Deletes group GROUP from the system" #define deluser_trivial_usage \ "USER" #define deluser_full_usage \ "Deletes user USER from the system" #ifdef CONFIG_DEVFSD_FG_NP #define USAGE_DEVFSD_FG_NP(a) a #else #define USAGE_DEVFSD_FG_NP(a) #endif #define devfsd_trivial_usage \ "mntpnt [-v]"\ USAGE_DEVFSD_FG_NP("[-fg][-np]" ) #define devfsd_full_usage \ "Optional daemon for managing devfs (the Linux Device Filesystem).\n" \ "\nOptions:\n" \ "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \ "\t-v\tPrint the protocol version numbers for devfsd\n" \ "\t\tand the kernel-side protocol version and exits." \ USAGE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \ "\t-np\tExit after parsing the configuration file\n" \ "\t\tand processing synthetic REGISTER events.\n" \ "\t\tDo not poll for events.") #ifdef CONFIG_FEATURE_HUMAN_READABLE #define USAGE_HUMAN_READABLE(a) a #define USAGE_NOT_HUMAN_READABLE(a) #else #define USAGE_HUMAN_READABLE(a) #define USAGE_NOT_HUMAN_READABLE(a) a #endif #define df_trivial_usage \ "[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]" #define df_full_usage \ "Print the filesystem space used and space available.\n\n" \ "Options:\n" \ USAGE_HUMAN_READABLE( \ "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ "\t-m\tprint sizes in megabytes\n" \ "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \ "\n\t-k\tprint sizes in kilobytes(compatibility)") #define df_example_usage \ "$ df\n" \ "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" \ "/dev/sda1 64216 36364 27852 57% /boot\n" \ "$ df /dev/sda3\n" \ "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" #define dirname_trivial_usage \ "[FILENAME ...]" #define dirname_full_usage \ "Strips non-directory suffix from FILENAME" #define dirname_example_usage \ "$ dirname /tmp/foo\n" \ "/tmp\n" \ "$ dirname /tmp/foo/\n" \ "/tmp\n" #define dmesg_trivial_usage \ "[-c] [-n LEVEL] [-s SIZE]" #define dmesg_full_usage \ "Prints or controls the kernel ring buffer\n\n" \ "Options:\n" \ "\t-c\t\tClears the ring buffer's contents after printing\n" \ "\t-n LEVEL\tSets console logging level\n" \ "\t-s SIZE\t\tUse a buffer of size SIZE" #define dos2unix_trivial_usage \ "[option] [FILE]" #define dos2unix_full_usage \ "Converts FILE from dos format to unix format. When no option\n" \ "is given, the input is converted to the opposite output format.\n" \ "When no file is given, uses stdin for input and stdout for output.\n\n" \ "Options:\n" \ "\t-u\toutput will be in UNIX format\n" \ "\t-d\toutput will be in DOS format" #define dpkg_trivial_usage \ "-i package_file\n" \ "[-CPru] package_name" #define dpkg_full_usage \ "\t-i\tInstall the package\n" \ "\t-C\tConfigure an unpackaged package\n" \ "\t-P\tPurge all files of a package\n" \ "\t-r\tRemove all but the configuration files for a package\n" \ "\t-u\tUnpack a package, but dont configure it\n" #define dpkg_deb_trivial_usage \ "[-cefItxX] FILE [argument]" #define dpkg_deb_full_usage \ "Perform actions on debian packages (.debs)\n\n" \ "Options:\n" \ "\t-c\tList contents of filesystem tree\n" \ "\t-e\tExtract control files to [argument] directory\n" \ "\t-f\tDisplay control field name starting with [argument]\n" \ "\t-I\tDisplay the control filenamed [argument]\n" \ "\t-t\tExtract filesystem tree to stdout in tar format\n" \ "\t-x\tExtract packages filesystem tree to directory\n" \ "\t-X\tVerbose extract" #define dpkg_deb_example_usage \ "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" #define dpkg_divert_trivial_usage \ "blah" #define dpkg_divert_full_usage \ "blah blah" #ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K #define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a #define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) #else #define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) #define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a #endif #define du_trivial_usage \ "[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..." #define du_full_usage \ "Summarizes disk space used for each FILE and/or directory.\n" \ "Disk space is printed in units of " \ USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \ " bytes.\n\n" \ "Options:\n" \ "\t-a\tshow sizes of files in addition to directories\n" \ "\t-H\tfollow symbolic links that are FILE command line args\n" \ "\t-L\tfollow all symbolic links encountered\n" \ "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \ "\t-c\toutput a grand total\n" \ "\t-l\tcount sizes many times if hard linked\n" \ "\t-s\tdisplay only a total for each argument\n" \ "\t-x\tskip directories on different filesystems\n" \ USAGE_HUMAN_READABLE( \ "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ "\t-m\tprint sizes in megabytes\n" ) \ "\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)") #define du_example_usage \ "$ du\n" \ "16 ./CVS\n" \ "12 ./kernel-patches/CVS\n" \ "80 ./kernel-patches\n" \ "12 ./tests/CVS\n" \ "36 ./tests\n" \ "12 ./scripts/CVS\n" \ "16 ./scripts\n" \ "12 ./docs/CVS\n" \ "104 ./docs\n" \ "2417 .\n" #define dumpkmap_trivial_usage \ "> keymap" #define dumpkmap_full_usage \ "Prints out a binary keyboard translation table to standard output." #define dumpkmap_example_usage \ "$ dumpkmap > keymap\n" #define dumpleases_trivial_usage \ "[-r|-a] [-f LEASEFILE]" #define dumpleases_full_usage \ "\t-f,\t--file=FILENAME\tLeases file to load\n" \ "\t-r,\t--remaining\tInterepret lease times as time remaing\n" \ "\t-a,\t--absolute\tInterepret lease times as expire time\n" #ifdef CONFIG_FEATURE_FANCY_ECHO #define USAGE_FANCY_ECHO(a) a #else #define USAGE_FANCY_ECHO(a) #endif #define echo_trivial_usage \ USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]" #define echo_full_usage \ "Prints the specified ARGs to stdout\n\n" \ USAGE_FANCY_ECHO("Options:\n" \ "\t-n\tsuppress trailing newline\n" \ "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \ "\t-E\tdisable interpretation of backslash-escaped characters") #define echo_example_usage \ "$ echo "Erik is cool"\n" \ "Erik is cool\n" \ USAGE_FANCY_ECHO("$ echo -e "Erik\\nis\\ncool"\n" \ "Erik\n" \ "is\n" \ "cool\n" \ "$ echo "Erik\\nis\\ncool"\n" \ "Erik\\nis\\ncool\n") #define env_trivial_usage \ "[-iu] [-] [name=value]... [command]" #define env_full_usage \ "Prints the current environment or runs a program after setting\n" \ "up the specified environment.\n\n" \ "Options:\n" \ "\t-, -i\tstart with an empty environment\n" \ "\t-u\tremove variable from the environment\n" #define expr_trivial_usage \ "EXPRESSION" #define expr_full_usage \ "Prints the value of EXPRESSION to standard output.\n\n" \ "EXPRESSION may be:\n" \ "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ "\tARG1 < ARG2 ARG1 is less than ARG2\n" \ "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \ "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \ "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \ "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \ "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \ "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \ "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \ "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \ "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \ "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \ "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \ "\tmatch STRING REGEXP same as STRING : REGEXP\n" \ "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \ "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \ "\t or 0\n" \ "\tlength STRING length of STRING\n" \ "\tquote TOKEN interpret TOKEN as a string, even if\n" \ "\t it is a keyword like `match' or an\n" \ "\t operator like `/'\n" \ "\t( EXPRESSION ) value of EXPRESSION\n\n" \ "Beware that many operators need to be escaped or quoted for shells.\n" \ "Comparisons are arithmetic if both ARGs are numbers, else\n" \ "lexicographical. Pattern matches return the string matched between \n" \ "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \ "of characters matched or 0." #define false_trivial_usage \ "" #define false_full_usage \ "Return an exit code of FALSE (1)." #define false_example_usage \ "$ false\n" \ "$ echo $?\n" \ "1\n" #define fbset_trivial_usage \ "[options] [mode]" #define fbset_full_usage \ "Show and modify frame buffer settings" #define fbset_example_usage \ "$ fbset\n" \ "mode "1024x768-76"\n" \ "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ "\tgeometry 1024 768 1024 768 16\n" \ "\ttimings 12714 128 32 16 4 128 4\n" \ "\taccel false\n" \ "\trgba 5/11,6/5,5/0,0/0\n" \ "endmode\n" #define fdflush_trivial_usage \ "DEVICE" #define fdflush_full_usage \ "Forces floppy disk drive to detect disk change" #define fdformat_trivial_usage \ "[-n] DEVICE" #define fdformat_full_usage \ "Low-level formats a floppy disk\n\n" \ "Options:\n" \ "\t-n\tDon't verify after format" #define fdisk_trivial_usage \ "[-l] [-v] [-b SSZ] [-u] DISK" #define fdisk_full_usage \ "Change partition table\n" \ "Options:\n" \ "-l List partition table(s)\n" \ "-u Give Start and End in sector (instead of cylinder) units\n" \ "-s PARTITION Give partition size(s) in blocks\n" \ "-b 2048: (for certain MO disks) use 2048-byte sectors\n" \ "-v Give fdisk version" #ifdef CONFIG_FEATURE_FIND_TYPE #define USAGE_FIND_TYPE(a) a #else #define USAGE_FIND_TYPE(a) #endif #ifdef CONFIG_FEATURE_FIND_PERM #define USAGE_FIND_PERM(a) a #else #define USAGE_FIND_PERM(a) #endif #ifdef CONFIG_FEATURE_FIND_MTIME #define USAGE_FIND_MTIME(a) a #else #define USAGE_FIND_MTIME(a) #endif #ifdef CONFIG_FEATURE_FIND_NEWER #define USAGE_FIND_NEWER(a) a #else #define USAGE_FIND_NEWER(a) #endif #ifdef CONFIG_FEATURE_FIND_INUM #define USAGE_FIND_INUM(a) a #else #define USAGE_FIND_INUM(a) #endif #define find_trivial_usage \ "[PATH...] [EXPRESSION]" #define find_full_usage \ "Search for files in a directory hierarchy. The default PATH is\n" \ "the current directory; default EXPRESSION is '-print'\n" \ "\nEXPRESSION may consist of:\n" \ "\t-follow\t\tDereference symbolic links.\n" \ "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN.\n" \ "\t-print\t\tPrint (default and assumed).\n" \ USAGE_FIND_TYPE( \ "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \ ) USAGE_FIND_PERM( \ "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \ ) USAGE_FIND_MTIME( \ "\n\t-mtime TIME\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \ ) USAGE_FIND_NEWER( \ "\n\t-newer FILE\tModified time is more recent than FILE's" \ ) USAGE_FIND_INUM( \ "\n\t-inum N\t\tFile has inode number N") #define find_example_usage \ "$ find / -name /etc/passwd\n" \ "/etc/passwd\n" #define fold_trivial_usage \ "[bsw] [FILE]" #define fold_full_usage \ "Wrap input lines in each FILE (standard input by default), writing to\n" \ "standard output.\n\n" \ "Options:\n" \ "\t-b\tcount bytes rather than columns\n" \ "\t-s\tbreak at spaces\n" \ "\t-w\tuse WIDTH columns instead of 80\n" #define free_trivial_usage \ "" #define free_full_usage \ "Displays the amount of free and used system memory" #define free_example_usage \ "$ free\n" \ " total used free shared buffers\n" \ " Mem: 257628 248724 8904 59644 93124\n" \ " Swap: 128516 8404 120112\n" \ "Total: 386144 257128 129016\n" \ #define freeramdisk_trivial_usage \ "DEVICE" #define freeramdisk_full_usage \ "Frees all memory used by the specified ramdisk." #define freeramdisk_example_usage \ "$ freeramdisk /dev/ram2\n" #define fsck_minix_trivial_usage \ "[-larvsmf] /dev/name" #define fsck_minix_full_usage \ "Performs a consistency check for MINIX filesystems.\n\n" \ "Options:\n" \ "\t-l\tLists all filenames\n" \ "\t-r\tPerform interactive repairs\n" \ "\t-a\tPerform automatic repairs\n" \ "\t-v\tverbose\n" \ "\t-s\tOutputs super-block information\n" \ "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \ "\t-f\tForce file system check." #define ftpget_trivial_usage \ "[options] remote-host local-directory remote-file" #define ftpget_full_usage \ "Retrieve a remote file via FTP.\n\n" \ "Options:\n" \ "\t-c, --continue Continue a previous transfer\n" \ "\t-v, --verbose Verbose\n" \ "\t-u, --username Username to be used\n" \ "\t-p, --password Password to be used\n" \ "\t-P, --port Port number to be used\n" #define ftpput_trivial_usage \ "[options] remote-host remote-directory local-file" #define ftpput_full_usage \ "Store a local file on a remote machine via FTP.\n\n" \ "Options:\n" \ "\t-v, --verbose Verbose\n" \ "\t-u, --username Username to be used\n" \ "\t-p, --password Password to be used\n" \ "\t-P, --port Port number to be used\n" #define getopt_trivial_usage \ "[OPTIONS]..." #define getopt_full_usage \ "Parse command options\n" \ "\t-a, --alternative Allow long options starting with single -\n" \ "\t-l, --longoptions=longopts Long options to be recognized\n" \ "\t-n, --name=progname The name under which errors are reported\n" \ "\t-o, --options=optstring Short options to be recognized\n" \ "\t-q, --quiet Disable error reporting by getopt(3)\n" \ "\t-Q, --quiet-output No normal output\n" \ "\t-s, --shell=shell Set shell quoting conventions\n" \ "\t-T, --test Test for getopt(1) version\n" \ "\t-u, --unqote Do not quote the output" #define getopt_example_usage \ "$ cat getopt.test\n" \ "#!/bin/sh\n" \ "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ " -n 'example.busybox' -- "$@"`\n" \ "if [ $? != 0 ] ; then exit 1 ; fi\n" \ "eval set -- "$GETOPT"\n" \ "while true ; do\n" \ " case $1 in\n" \ " -a|--a-long) echo \"Option a\" ; shift ;;\n" \ " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \ " -c|--c-long)\n" \ " case "$2" in\n" \ " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \ " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \ " esac ;;\n" \ " --) shift ; break ;;\n" \ " *) echo \"Internal error!\" ; exit 1 ;;\n" \ " esac\n" \ "done\n" #define getty_trivial_usage \ "getty [OPTIONS]... baud_rate,... line [termtype]" #define getty_full_usage \ "\nOpens a tty, prompts for a login name, then invokes /bin/login\n\n" \ "Options:\n" \ "\t-h\t\tEnable hardware (RTS/CTS) flow control.\n" \ "\t-i\t\tDo not display /etc/issue before running login.\n" \ "\t-L\t\tLocal line, so do not do carrier detect.\n" \ "\t-m\t\tGet baud rate from modem's CONNECT status message.\n" \ "\t-w\t\tWait for a CR or LF before sending /etc/issue.\n" \ "\t-n\t\tDo not prompt the user for a login name.\n" \ "\t-f issue_file\tDisplay issue_file instead of /etc/issue.\n" \ "\t-l login_app\tInvoke login_app instead of /bin/login.\n" \ "\t-t timeout\tTerminate after timeout if no username is read.\n" \ "\t-I initstring\tSets the init string to send before anything else.\n" \ "\t-H login_host\tLog login_host into the utmp file as the hostname." #define grep_trivial_usage \ "[-ihHnqvs] PATTERN [FILEs...]" #define grep_full_usage \ "Search for PATTERN in each FILE or standard input.\n\n" \ "Options:\n" \ "\t-H\tprefix output lines with filename where match was found\n" \ "\t-h\tsuppress the prefixing filename on output\n" \ "\t-i\tignore case distinctions\n" \ "\t-l\tlist names of files that match\n" \ "\t-n\tprint line number with output lines\n" \ "\t-q\tbe quiet. Returns 0 if result was found, 1 otherwise\n" \ "\t-v\tselect non-matching lines\n" \ "\t-s\tsuppress file open/read error messages" #define grep_example_usage \ "$ grep root /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "$ grep ^[rR]oo. /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" #define gunzip_trivial_usage \ "[OPTION]... FILE" #define gunzip_full_usage \ "Uncompress FILE (or standard input if FILE is '-').\n\n" \ "Options:\n" \ "\t-c\tWrite output to standard output\n" \ "\t-t\tTest compressed file integrity" #define gunzip_example_usage \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" #define gzip_trivial_usage \ "[OPTION]... [FILE]..." #define gzip_full_usage \ "Compress FILE(s) with maximum compression.\n" \ "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \ "Options:\n" \ "\t-c\tWrite output to standard output instead of FILE.gz\n" \ "\t-d\tdecompress" #define gzip_example_usage \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ "$ gzip /tmp/busybox.tar\n" \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" #define halt_trivial_usage \ "" #define halt_full_usage \ "Halt the system." #ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY #define USAGE_HDPARM_IDENT(a) a #else #define USAGE_HDPARM_IDENT(a) #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF #define USAGE_SCAN_HWIF(a) a #else #define USAGE_SCAN_HWIF(a) #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF #define USAGE_UNREGISTER_HWIF(a) a #else #define USAGE_UNREGISTER_HWIF(a) #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET #define USAGE_DRIVE_RESET(a) a #else #define USAGE_DRIVE_RESET(a) #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF #define USAGE_TRISTATE_HWIF(a) a #else #define USAGE_TRISTATE_HWIF(a) #endif #ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA #define USAGE_GETSET_DMA(a) a #else #define USAGE_GETSET_DMA(a) #endif #define hdparm_trivial_usage \ "[options] [device] .." #define hdparm_full_usage \ "Options:" \ " -a get/set fs readahead\n" \ " -A set drive read-lookahead flag (0/1)\n" \ " -b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ " -B set Advanced Power Management setting (1-255)\n" \ " -c get/set IDE 32-bit IO setting\n" \ " -C check IDE power mode status\n" \ USAGE_GETSET_DMA(" -d get/set using_dma flag\n") \ " -D enable/disable drive defect-mgmt\n" \ " -f flush buffer cache for device on exit\n" \ " -g display drive geometry\n" \ " -h display terse usage information\n" \ " -i display drive identification\n" \ USAGE_HDPARM_IDENT(" -I detailed/current information directly from drive\n") \ USAGE_HDPARM_IDENT(" -Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \ " -k get/set keep_settings_over_reset flag (0/1)\n" \ " -K set drive keep_features_over_reset flag (0/1)\n" \ " -L set drive doorlock (0/1) (removable harddisks only)\n" \ " -m get/set multiple sector count\n" \ " -n get/set ignore-write-errors flag (0/1)\n" \ " -p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ " -P set drive prefetch count\n" \ " -q change next setting quietly\n" \ " -Q get/set DMA tagged-queuing depth (if supported)\n" \ " -r get/set readonly flag (DANGEROUS to set)\n" \ USAGE_SCAN_HWIF(" -R register an IDE interface (DANGEROUS)\n") \ " -S set standby (spindown) timeout\n" \ " -t perform device read timings\n" \ " -T perform cache read timings\n" \ " -u get/set unmaskirq flag (0/1)\n" \ USAGE_UNREGISTER_HWIF(" -U un-register an IDE interface (DANGEROUS)\n") \ " -v defaults; same as -mcudkrag for IDE drives\n" \ " -V display program version and exit immediately\n" \ USAGE_DRIVE_RESET(" -w perform device reset (DANGEROUS)\n") \ " -W set drive write-caching flag (0/1) (DANGEROUS)\n" \ USAGE_TRISTATE_HWIF(" -x tristate device for hotswap (0/1) (DANGEROUS)\n") \ " -X set IDE xfer mode (DANGEROUS)\n" \ " -y put IDE drive in standby mode\n" \ " -Y put IDE drive to sleep\n" \ " -Z disable Seagate auto-powersaving mode\n" \ " -z re-read partition table\n" #ifdef CONFIG_FEATURE_FANCY_HEAD #define USAGE_FANCY_HEAD(a) a #else #define USAGE_FANCY_HEAD(a) #endif #define head_trivial_usage \ "[OPTION]... [FILE]..." #define head_full_usage \ "Print first 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ "Options:\n" \ "\t-n NUM\t\tPrint first NUM lines instead of first 10" \ USAGE_FANCY_HEAD( \ "\n\t-c NUM\t\toutput the first NUM bytes\n" \ "\t-q\t\tnever output headers giving file names\n" \ "\t-v\t\talways output headers giving file names" ) #define head_example_usage \ "$ head -n 2 /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" #define hexdump_trivial_usage \ "[-[bcdefnosvx]] [OPTION] FILE" #define hexdump_full_usage \ "The hexdump utility is a filter which displays the specified files,\n" \ "or the standard input, if no files are specified, in a user specified\n"\ "format\n" \ "\t-b\t\tOne-byte octal display\n" \ "\t-c\t\tOne-byte character display\n" \ "\t-d\t\tTwo-byte decimal display\n" \ "\t-e FORMAT STRING\n" \ "\t-f FORMAT FILE\n" \ "\t-n LENGTH\tInterpret only length bytes of input\n" \ "\t-o\t\tTwo-byte octal display\n" \ "\t-s OFFSET\tSkip offset byte\n" \ "\t-v\t\tdisplay all input data\n" \ "\t-x\t\tTwo-byte hexadecimal display\n" #define hostid_trivial_usage \ "" #define hostid_full_usage \ "Print out a unique 32-bit identifier for the machine." #define hostname_trivial_usage \ "[OPTION] {hostname | -F FILE}" #define hostname_full_usage \ "Get or set the hostname or DNS domain name. If a hostname is given\n" \ "(or FILE with the -F parameter), the host name will be set.\n\n" \ "Options:\n" \ "\t-s\tShort\n" \ "\t-i\tAddresses for the hostname\n" \ "\t-d\tDNS domain name\n" \ "\t-f\tFully qualified domain name\n" \ "\t-F FILE\tUse the contents of FILE to specify the hostname" #define hostname_example_usage \ "$ hostname\n" \ "sage \n" #ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH #define USAGE_HTTPD_BASIC_AUTH(a) a #ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5 #define USAGE_HTTPD_AUTH_MD5(a) a #else #define USAGE_HTTPD_AUTH_MD5(a) #endif #else #define USAGE_HTTPD_BASIC_AUTH(a) #define USAGE_HTTPD_AUTH_MD5(a) #endif #ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY #define USAGE_HTTPD_STANDALONE(a) #define USAGE_HTTPD_SETUID(a) #else #define USAGE_HTTPD_STANDALONE(a) a #ifdef CONFIG_FEATURE_HTTPD_SETUID #define USAGE_HTTPD_SETUID(a) a #else #define USAGE_HTTPD_SETUID(a) #endif #endif #define httpd_trivial_usage \ "[-c ]" \ USAGE_HTTPD_STANDALONE(" [-p ]") \ USAGE_HTTPD_SETUID(" [-u user]") \ USAGE_HTTPD_BASIC_AUTH(" [-r ]") \ USAGE_HTTPD_AUTH_MD5(" [-m pass]") \ " [-d/-e ]" #define httpd_full_usage \ "Listens for incoming http server requests.\n"\ "Options:\n" \ "\t-c FILE\tSpecifies configuration file. (default httpd.conf)\n" \ USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \ USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privilegies port\n") \ USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \ USAGE_HTTPD_AUTH_MD5("\t-m PASS\tCrypt PASS with md5 algorithm\n") \ "\t-e STRING\tHtml encode STRING\n" \ "\t-d STRING\tURL decode STRING" #define hwclock_trivial_usage \ "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]" #define hwclock_full_usage \ "Query and set the hardware clock (RTC)\n\n" \ "Options:\n" \ "\t-r\tread hardware clock and print result\n" \ "\t-s\tset the system time from the hardware clock\n" \ "\t-w\tset the hardware clock to the current system time\n" \ "\t-u\tthe hardware clock is kept in coordinated universal time\n" \ "\t-l\tthe hardware clock is kept in local time" #ifdef CONFIG_SELINUX #define USAGE_SELINUX(a, b) a #else #define USAGE_SELINUX(a, b) b #endif #define id_trivial_usage \ "[OPTIONS]... [USERNAME]" #define id_full_usage \ "Print information for USERNAME or the current user\n\n" \ "Options:\n" \ "\t-g\tprints only the group ID\n" \ "\t-u\tprints only the user ID\n" \ USAGE_SELINUX("\t-c\tprints only the security context\n", "") \ "\t-n\tprint a name instead of a number (with for -ug)\n" \ "\t-r\tprints the real user ID instead of the effective ID (with -ug)" #define id_example_usage \ "$ id\n" \ "uid=1000(andersen) gid=1000(andersen)\n" #ifdef CONFIG_FEATURE_IFCONFIG_SLIP #define USAGE_SIOCSKEEPALIVE(a) a #else #define USAGE_SIOCSKEEPALIVE(a) #endif #ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ #define USAGE_IFCONFIG_MII(a) a #else #define USAGE_IFCONFIG_MII(a) #endif #ifdef CONFIG_FEATURE_IFCONFIG_HW #define USAGE_IFCONFIG_HW(a) a #else #define USAGE_IFCONFIG_HW(a) #endif #ifdef CONFIG_FEATURE_IFCONFIG_STATUS #define USAGE_IFCONFIG_OPT_A(a) a #else #define USAGE_IFCONFIG_OPT_A(a) #endif #ifdef CONFIG_FEATURE_IPV6 #define USAGE_IPV6(a) a #else #define USAGE_IPV6(a) #endif #define ifconfig_trivial_usage \ USAGE_IFCONFIG_OPT_A("[-a]") " [
]" #define ifconfig_full_usage \ "configure a network interface\n\n" \ "Options:\n" \ USAGE_IPV6("[add
[/]]\n") \ USAGE_IPV6("[del
[/]]\n") \ "\t[[-]broadcast [
]] [[-]pointopoint [
]]\n" \ "\t[netmask
] [dstaddr
]\n" \ USAGE_SIOCSKEEPALIVE("\t[outfill ] [keepalive ]\n") \ "\t" USAGE_IFCONFIG_HW("[hw ether
] ") \ "[metric ] [mtu ]\n" \ "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \ "\t[multicast] [[-]promisc] [txqueuelen ] [[-]dynamic]\n" \ USAGE_IFCONFIG_MII("\t[mem_start ] [io_addr ] [irq ]\n") \ "\t[up|down] ..." #define ifup_trivial_usage \ "<-ahinv> " #define ifup_full_usage \ "Usage: ifup \n\n" \ "Options:\n" \ "\t-h\tthis help\n" \ "\t-a\tde/configure all interfaces automatically\n" \ "\t-i FILE\tuse FILE for interface definitions\n" \ "\t-n\tprint out what would happen, but don't do it\n" \ "\t\t\t(note that this option doesn't disable mappings)\n" \ "\t-v\tprint out what would happen before doing it\n" \ "\t-m\tdon't run any mappings\n" \ "\t-f\tforce de/configuration\n" #define ifdown_trivial_usage \ "<-ahinv> " #define ifdown_full_usage \ "Usage: ifdown \n\n" \ "Options:\n" \ "\t-h\tthis help\n" \ "\t-a\tde/configure all interfaces automatically\n" \ "\t-i FILE\tuse FILE for interface definitions\n" \ "\t-n\tprint out what would happen, but don't do it\n" \ "\t\t(note that this option doesn't disable mappings)\n" \ "\t-v\tprint out what would happen before doing it\n" \ "\t-m\tdon't run any mappings\n" \ "\t-f\tforce de/configuration\n" #define inetd_trivial_usage \ "[-q len] [conf]" #define inetd_full_usage \ "Usage: [-q len] [conf]\n\n" \ "Option:\n" \ "\t-q\tSets the size of the socket listen queue to\n" \ "the specified value. Default is 128." #define init_trivial_usage \ "" #define init_full_usage \ "Init is the parent of all processes." #define init_notes_usage \ "This version of init is designed to be run only by the kernel.\n" \ "\n" \ "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ "the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \ "runlevels, use sysvinit.\n" \ "\n" \ "BusyBox init works just fine without an inittab. If no inittab is found, \n" \ "it has the following default behavior:\n" \ "\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " ::askfirst:/bin/sh\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/sbin/swapoff -a\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::restart:/sbin/init\n" \ "\n" \ "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \ "\n" \ " tty2::askfirst:/bin/sh\n" \ " tty3::askfirst:/bin/sh\n" \ " tty4::askfirst:/bin/sh\n" \ "\n" \ "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ "\n" \ " :::\n" \ "\n" \ " : \n" \ "\n" \ " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ " The id field is used by BusyBox init to specify the controlling tty for\n" \ " the specified process to run on. The contents of this field are\n" \ " appended to "/dev/" and used as-is. There is no need for this field to\n" \ " be unique, although if it isn't you may have strange results. If this\n" \ " field is left blank, the controlling tty is set to the console. Also\n" \ " note that if BusyBox detects that a serial console is in use, then only\n" \ " entries whose controlling tty is either the serial console or /dev/null\n" \ " will be run. BusyBox init does nothing with utmp. We don't need no\n" \ " stinkin' utmp.\n" \ "\n" \ " : \n" \ "\n" \ " The runlevels field is completely ignored.\n" \ "\n" \ " : \n" \ "\n" \ " Valid actions include: sysinit, respawn, askfirst, wait, \n" \ " once, restart, ctrlaltdel, and shutdown.\n" \ "\n" \ " The available actions can be classified into two groups: actions\n" \ " that are run only once, and actions that are re-run when the specified\n" \ " process exits.\n" \ "\n" \ " Run only-once actions:\n" \ "\n" \ " 'sysinit' is the first item run on boot. init waits until all\n" \ " sysinit actions are completed before continuing. Following the\n" \ " completion of all sysinit actions, all 'wait' actions are run.\n" \ " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ " the specified task completes. 'once' actions are asynchronous,\n" \ " therefore, init does not wait for them to complete. 'restart' is\n" \ " the action taken to restart the init process. By default this should\n" \ " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ " actions are run when the system detects that someone on the system\n" \ " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ " wants to run 'reboot' at this point to cause the system to reboot.\n" \ " Finally the 'shutdown' action specifies the actions to taken when\n" \ " init is told to reboot. Unmounting filesystems and disabling swap\n" \ " is a very good here\n" \ "\n" \ " Run repeatedly actions:\n" \ "\n" \ " 'respawn' actions are run after the 'once' actions. When a process\n" \ " started with a 'respawn' action exits, init automatically restarts\n" \ " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ " respawning out of control. The 'askfirst' actions acts just like\n" \ " respawn, except that before running the specified process it\n" \ " displays the line "Please press Enter to activate this console."\n" \ " and then waits for the user to press enter before starting the\n" \ " specified process. \n" \ "\n" \ " Unrecognized actions (like initdefault) will cause init to emit an\n" \ " error message, and then go along with its business. All actions are\n" \ " run in the order they appear in /etc/inittab.\n" \ "\n" \ " : \n" \ "\n" \ " Specifies the process to be executed and it's command line.\n" \ "\n" \ "Example /etc/inittab file:\n" \ "\n" \ " # This is run first except when booting in single-user mode.\n" \ " #\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " \n" \ " # /bin/sh invocations on selected ttys\n" \ " #\n" \ " # Start an "askfirst" shell on the console (whatever that may be)\n" \ " ::askfirst:-/bin/sh\n" \ " # Start an "askfirst" shell on /dev/tty2-4\n" \ " tty2::askfirst:-/bin/sh\n" \ " tty3::askfirst:-/bin/sh\n" \ " tty4::askfirst:-/bin/sh\n" \ " \n" \ " # /sbin/getty invocations for selected ttys\n" \ " #\n" \ " tty4::respawn:/sbin/getty 38400 tty4\n" \ " tty5::respawn:/sbin/getty 38400 tty5\n" \ " \n" \ " \n" \ " # Example of how to put a getty on a serial line (for a terminal)\n" \ " #\n" \ " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ " #\n" \ " # Example how to put a getty on a modem line.\n" \ " #::respawn:/sbin/getty 57600 ttyS2\n" \ " \n" \ " # Stuff to do when restarting the init process\n" \ " ::restart:/sbin/init\n" \ " \n" \ " # Stuff to do before rebooting\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::shutdown:/sbin/swapoff -a\n" #ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP #define USAGE_INSMOD_MAP(a) a #else #define USAGE_INSMOD_MAP(a) #endif #define insmod_trivial_usage \ "[OPTION]... MODULE [symbol=value]..." #define insmod_full_usage \ "Loads the specified kernel modules into the kernel.\n\n" \ "Options:\n" \ "\t-f\tForce module to load into the wrong kernel version.\n" \ "\t-k\tMake module autoclean-able.\n" \ "\t-v\tverbose output\n" \ "\t-L\tLock to prevent simultaneous loads of a module\n" \ USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout") \ "\t-x\tdo not export externs\n" #define install_trivial_usage \ "[cgmops] [sources] " #define install_full_usage \ "copy files and set attributes\n\n" \ "Options:\n" \ "\t-c\tcopy the file, default\n" \ "\t-g\tset group ownership\n" \ "\t-m\tset permission modes\n" \ "\t-o\tset ownership\n" \ "\t-p\tpreserve date\n" \ "\t-s\tstrip symbol tables\n" #define ip_trivial_usage \ "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }" #define ip_full_usage \ "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \ "where OBJECT := { link | addr | route | tunnel }\n" \ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }\n" #define ipaddr_trivial_usage \ "{ {add|del} IFADDR dev STRING | {show|flush} [ dev STRING ] [ to PREFIX ] }" #define ipaddr_full_usage \ "ipaddr {add|del} IFADDR dev STRING\n" \ "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \ " [ to PREFIX ] [ label PATTERN ]\n" \ "IFADDR := PREFIX | ADDR peer PREFIX\n" \ " [ broadcast ADDR ] [ anycast ADDR ]\n" \ " [ label STRING ] [ scope SCOPE-ID ]\n" \ "SCOPE-ID := [ host | link | global | NUMBER ]\n" #ifndef CONFIG_FEATURE_IPCALC_FANCY #define ipcalc_trivial_usage \ "[--broadcast] [--netmask] [--network] ipaddr " #define ipcalc_full_usage \ "Calculate IP network settings from a IP address\n\n" \ "Options:\n" \ "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \ "\t-n\t--netmask\tDisplay default netmask for IP.\n" \ "\t-w\t--network\tDisplay calculated network address." #else #define ipcalc_trivial_usage \ "[OPTION]... ipaddr " #define ipcalc_full_usage \ "Calculate IP network settings from a IP address\n\n" \ "Options:\n" \ "\t-b\t--broadcast\tDisplay calculated broadcast address.\n" \ "\t-n\t--netmask\tDisplay default netmask for IP.\n" \ "\t-w\t--network\tDisplay calculated network address.\n" \ "\t-h\t--hostname\tDisplay first resolved host name.\n" \ "\t-s\t--silent\tDon't ever display error messages." #endif #define ipcalc_notes_usage \ "ipcalc provides a simple way to calculate IP information for\n" \ "a host. The various options specify what information ipcalc\n" \ "should display on standard out. Multiple options may be\n" \ "specified.\n" #define iplink_trivial_usage \ "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }" #define iplink_full_usage \ "iplink set DEVICE { up | down | arp { on | off } |\n" \ " dynamic { on | off } |\n" \ " mtu MTU }\n" \ "iplink show [ DEVICE ]\n" #define iproute_trivial_usage \ "{ list | flush | { add | del | change | append | replace | monitor } ROUTE }" #define iproute_full_usage \ "iproute { list | flush } SELECTOR\n" \ "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \ " [ oif STRING ] [ tos TOS ]\n" \ "iproute { add | del | change | append | replace | monitor } ROUTE\n" \ "SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \ "ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]\n" #define iptunnel_trivial_usage \ "{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ] [ ttl TTL ]" #define iptunnel_full_usage \ "iptunnel { add | change | del | show } [ NAME ]\n" \ " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \ " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \ " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n" #define insmod_ng_trivial_usage \ "MODULE [symbol=value]..." #define insmod_ng_full_usage \ "Loads the specified kernel modules into the kernel." #define kill_trivial_usage \ "[-signal] process-id [process-id ...]" #define kill_full_usage \ "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\ "Options:\n" \ "\t-l\tList all signal names and numbers." #define kill_example_usage \ "$ ps | grep apache\n" \ "252 root root S [apache]\n" \ "263 www-data www-data S [apache]\n" \ "264 www-data www-data S [apache]\n" \ "265 www-data www-data S [apache]\n" \ "266 www-data www-data S [apache]\n" \ "267 www-data www-data S [apache]\n" \ "$ kill 252\n" #define killall_trivial_usage \ "[-signal] process-name [process-name ...]" #define killall_full_usage \ "Send a signal (default is SIGTERM) to the specified process(es).\n\n"\ "Options:\n" \ "\t-l\tList all signal names and numbers." #define killall_example_usage \ "$ killall apache\n" #define klogd_trivial_usage \ "[-c n] [-n]" #define klogd_full_usage \ "Kernel logger.\n"\ "Options:\n"\ "\t-c n\tSets the default log level of console messages to n.\n"\ "\t-n\tRun as a foreground process." #define length_trivial_usage \ "STRING" #define length_full_usage \ "Prints out the length of the specified STRING." #define length_example_usage \ "$ length Hello\n" \ "5\n" #define ln_trivial_usage \ "[OPTION] TARGET... LINK_NAME|DIRECTORY" #define ln_full_usage \ "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n"\ "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \ "Options:\n" \ "\t-s\tmake symbolic links instead of hard links\n" \ "\t-f\tremove existing destination files\n" \ "\t-n\tno dereference symlinks - treat like normal file" #define ln_example_usage \ "$ ln -s BusyBox /tmp/ls\n" \ "$ ls -l /tmp/ls\n" \ "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" #define loadfont_trivial_usage \ "< font" #define loadfont_full_usage \ "Loads a console font from standard input." #define loadfont_example_usage \ "$ loadfont < /etc/i18n/fontname\n" #define loadkmap_trivial_usage \ "< keymap" #define loadkmap_full_usage \ "Loads a binary keyboard translation table from standard input." #define loadkmap_example_usage \ "$ loadkmap < /etc/i18n/lang-keymap\n" #define logger_trivial_usage \ "[OPTION]... [MESSAGE]" #define logger_full_usage \ "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \ "Options:\n" \ "\t-s\tLog to stderr as well as the system log.\n" \ "\t-t\tLog using the specified tag (defaults to user name).\n" \ "\t-p\tEnter the message with the specified priority.\n" \ "\t\tThis may be numerical or a ``facility.level'' pair." #define logger_example_usage \ "$ logger "hello"\n" #define login_trivial_usage \ "[OPTION]... [username] [ENV=VAR ...]" #define login_full_usage \ "Begin a new session on the system\n\n" \ "Options:\n" \ "\t-f\tDo not authenticate (user already authenticated)\n" \ "\t-h\tName of the remote host for this login.\n" \ "\t-p\tPreserve environment." #define logname_trivial_usage \ "" #define logname_full_usage \ "Print the name of the current user." #define logname_example_usage \ "$ logname\n" \ "root\n" #define logread_trivial_usage \ "[OPTION]..." #define logread_full_usage \ "Shows the messages from syslogd (using circular buffer).\n\n" "Options:\n" \ "\t-f\t\toutput data as the log grows" #define losetup_trivial_usage \ "[OPTION]... LOOPDEVICE FILE\n" \ "or: losetup [OPTION]... -d LOOPDEVICE" #define losetup_full_usage \ "Associate LOOPDEVICE with FILE.\n\n" \ "Options:\n" \ "\t-d\t\tDisassociate LOOPDEVICE.\n" \ "\t-o OFFSET\tStart OFFSET bytes into FILE.\n" #ifdef CONFIG_FEATURE_LS_TIMESTAMPS #define USAGE_LS_TIMESTAMPS(a) a #else #define USAGE_LS_TIMESTAMPS(a) #endif #ifdef CONFIG_FEATURE_LS_FILETYPES #define USAGE_LS_FILETYPES(a) a #else #define USAGE_LS_FILETYPES(a) #endif #ifdef CONFIG_FEATURE_LS_FOLLOWLINKS #define USAGE_LS_FOLLOWLINKS(a) a #else #define USAGE_LS_FOLLOWLINKS(a) #endif #ifdef CONFIG_FEATURE_LS_RECURSIVE #define USAGE_LS_RECURSIVE(a) a #else #define USAGE_LS_RECURSIVE(a) #endif #ifdef CONFIG_FEATURE_LS_SORTFILES #define USAGE_LS_SORTFILES(a) a #else #define USAGE_LS_SORTFILES(a) #endif #ifdef CONFIG_FEATURE_AUTOWIDTH #define USAGE_AUTOWIDTH(a) a #else #define USAGE_AUTOWIDTH(a) #endif #define ls_trivial_usage \ "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K", "") "] [filenames...]" #define ls_full_usage \ "List directory contents\n\n" \ "Options:\n" \ "\t-1\tlist files in a single column\n" \ "\t-A\tdo not list implied . and ..\n" \ "\t-a\tdo not hide entries starting with .\n" \ "\t-C\tlist entries by columns\n" \ USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \ "\t-d\tlist directory entries instead of contents\n" \ USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \ USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \ "\t-i\tlist the i-node for each file\n" \ "\t-l\tuse a long listing format\n" \ "\t-n\tlist numeric UIDs and GIDs instead of names\n" \ USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \ USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \ USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \ USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \ USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \ "\t-s\tlist the size of each file, in blocks\n" \ USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \ USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \ USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \ USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \ USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \ "\t-x\tlist entries by lines instead of by columns\n" \ USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \ USAGE_HUMAN_READABLE( \ "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ USAGE_SELINUX("\t-k\tprint security context\n\t-K\tprint security context in long format\n", "")) #define lsmod_trivial_usage \ "" #define lsmod_full_usage \ "List the currently loaded kernel modules." #define makedevs_trivial_usage \ "NAME TYPE MAJOR MINOR FIRST LAST [s]" #define makedevs_full_usage \ "Creates a range of block or character special files\n\n" \ "TYPEs include:\n" \ "\tb:\tMake a block (buffered) device.\n" \ "\tc or u:\tMake a character (un-buffered) device.\n" \ "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \ "FIRST specifies the number appended to NAME to create the first device.\n" \ "LAST specifies the number of the last item that should be created.\n" \ "If 's' is the last argument, the base device is created as well.\n\n" \ "For example:\n" \ "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \ "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" #define makedevs_example_usage \ "$ makedevs /dev/ttyS c 4 66 2 63\n" \ "[creates ttyS2-ttyS63]\n" \ "$ makedevs /dev/hda b 3 0 0 8 s\n" \ "[creates hda,hda1-hda8]\n" #ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK #define USAGE_MD5_SHA1_SUM_CHECK(a) a #else #define USAGE_MD5_SHA1_SUM_CHECK(a) #endif #define md5sum_trivial_usage \ "[OPTION] [FILEs...]" \ USAGE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") #define md5sum_full_usage \ "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \ "Options:\n" \ "With no FILE, or when FILE is -, read standard input." \ USAGE_MD5_SHA1_SUM_CHECK("\n\n" \ "\t-c\tcheck MD5 sums against given list\n" \ "\nThe following two options are useful only when verifying checksums:\n" \ "\t-s\tdon't output anything, status code shows success\n" \ "\t-w\twarn about improperly formated MD5 checksum lines") #define md5sum_example_usage \ "$ md5sum < busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003\n" \ "$ md5sum busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "$ md5sum -c -\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "busybox: OK\n" \ "^D\n" #define mesg_trivial_usage \ "mesg [y|n]" #define mesg_full_usage \ "mesg [Y|N], controls write access to your terminal\n" \ "\ty\tAllow write access to your terminal.\n" \ "\tn\tDisallow write access to your terminal.\n" #define minit_trivial_usage \ "[-spPrRC]" #define minit_full_usage \ "[-spPrRC]" #define mkdir_trivial_usage \ "[OPTION] DIRECTORY..." #define mkdir_full_usage \ "Create the DIRECTORY(ies) if they do not already exist\n\n" \ "Options:\n" \ "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \ "\t-p\tno error if existing, make parent directories as needed" #define mkdir_example_usage \ "$ mkdir /tmp/foo\n" \ "$ mkdir /tmp/foo\n" \ "/tmp/foo: File exists\n" \ "$ mkdir /tmp/foo/bar/baz\n" \ "/tmp/foo/bar/baz: No such file or directory\n" \ "$ mkdir -p /tmp/foo/bar/baz\n" #define mkfifo_trivial_usage \ "[OPTIONS] name" #define mkfifo_full_usage \ "Creates a named pipe (identical to 'mknod name p')\n\n" \ "Options:\n" \ "\t-m\tcreate the pipe using the specified mode (default a=rw)" #define mkfs_minix_trivial_usage \ "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" #define mkfs_minix_full_usage \ "Make a MINIX filesystem.\n\n" \ "Options:\n" \ "\t-c\t\tCheck the device for bad blocks\n" \ "\t-n [14|30]\tSpecify the maximum length of filenames\n" \ "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \ "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \ "\t-v\t\tMake a Minix version 2 filesystem" #define mknod_trivial_usage \ "[OPTIONS] NAME TYPE MAJOR MINOR" #define mknod_full_usage \ "Create a special file (block, character, or pipe).\n\n" \ "Options:\n" \ "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \ "TYPEs include:\n" \ "\tb:\tMake a block (buffered) device.\n" \ "\tc or u:\tMake a character (un-buffered) device.\n" \ "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes." #define mknod_example_usage \ "$ mknod /dev/fd0 b 2 0 \n" \ "$ mknod -m 644 /tmp/pipe p\n" #define mkswap_trivial_usage \ "[-c] [-v0|-v1] device [block-count]" #define mkswap_full_usage \ "Prepare a disk partition to be used as a swap partition.\n\n" \ "Options:\n" \ "\t-c\t\tCheck for read-ability.\n" \ "\t-v0\t\tMake version 0 swap [max 128 Megs].\n" \ "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117).\n" \ "\tblock-count\tNumber of block to use (default is entire partition)." #define mktemp_trivial_usage \ "[-q] TEMPLATE" #define mktemp_full_usage \ "Creates a temporary file with its name based on TEMPLATE.\n" \ "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX)." #define mktemp_example_usage \ "$ mktemp /tmp/temp.XXXXXX\n" \ "/tmp/temp.mWiLjM\n" \ "$ ls -la /tmp/temp.mWiLjM\n" \ "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" #define modprobe_trivial_usage \ "[FILE ...]" #define modprobe_full_usage \ "Used for high level module loading and unloading." #define modprobe_example_usage \ "$ modprobe cdrom\n" #define more_trivial_usage \ "[FILE ...]" #define more_full_usage \ "More is a filter for viewing FILE one screenful at a time." #define more_example_usage \ "$ dmesg | more\n" #ifdef CONFIG_FEATURE_MOUNT_LOOP #define USAGE_MOUNT_LOOP(a) a #else #define USAGE_MOUNT_LOOP(a) #endif #ifdef CONFIG_FEATURE_MTAB_SUPPORT #define USAGE_MTAB(a) a #else #define USAGE_MTAB(a) #endif #define mount_trivial_usage \ "[flags] DEVICE NODE [-o options,more-options]" #define mount_full_usage \ "Mount a filesystem\n\n" \ "Flags:\n" \ "\t-a:\t\tMount all filesystems in fstab.\n" \ USAGE_MTAB( \ "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it.\n" \ "\t-n:\t\tDon't write a mount table entry.\n" \ ) \ "\t-o option:\tOne of many filesystem options, listed below.\n" \ "\t-r:\t\tMount the filesystem read-only.\n" \ "\t-t fs-type:\tSpecify the filesystem type.\n" \ "\t-w:\t\tMount for reading and writing (default).\n" \ "\n" \ "Options for use with the \"-o\" flag:\n" \ "\tasync/sync:\tWrites are asynchronous / synchronous.\n" \ "\tatime/noatime:\tEnable / disable updates to inode access times.\n" \ "\tdev/nodev:\tAllow use of special device files / disallow them.\n" \ "\texec/noexec:\tAllow use of executable files / disallow them.\n" \ USAGE_MOUNT_LOOP( \ "\tloop:\t\tMounts a file via loop device.\n" \ ) \ "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them.\n" \ "\tremount:\tRe-mount a mounted filesystem, changing its flags.\n" \ "\tro/rw:\t\tMount for read-only / read-write.\n" \ "\tbind:\t\tUse the linux 2.4.x \"bind\" feature.\n" \ "\nThere are EVEN MORE flags that are specific to each filesystem.\n" \ "You'll have to see the written documentation for those filesystems." #define mount_example_usage \ "$ mount\n" \ "/dev/hda3 on / type minix (rw)\n" \ "proc on /proc type proc (rw)\n" \ "devpts on /dev/pts type devpts (rw)\n" \ "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" #define msvc_trivial_usage \ "-[udorspchaitkx] service" #define msvc_full_usage \ "[option] service\n" \ "Where option is one of\n" \ "\t-u\tUp. If the service is not running, start it. If the service stops, restart it.\n" \ "\t-d\tDown. If the service is running, stop it, do not restart it.\n" \ "\t-o\tOnce. If the service is not running, start it. Do not restart it if it stops.\n" \ "\t-r\tTell supervise that the service is normally running; this affects status messages.\n" \ "\t-s\tTell supervise that the service is normally stopped; this affects status messages.\n" \ "\t-p\tPause. Send the service a STOP signal.\n" \ "\t-c\tContinue. Send the service a CONT signal.\n" \ "\t-h\tHangup. Send the service a HUP signal.\n" \ "\t-a\tAlarm. Send the service an ALRM signal.\n" \ "\t-i\tInterrupt. Send the service an INT signal.\n" \ "\t-t\tTerminate. Send the service a TERM signal.\n" \ "\t-k\tKill. Send the service a KILL signal.\n" \ "\t-x\tExit. supervise will quit as soon as the service is down.\n" #define mt_trivial_usage \ "[-f device] opcode value" #define mt_full_usage \ "Control magnetic tape drive operation\n" \ "\nAvailable Opcodes:\n\n" \ "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ "setpart tell unload unlock weof wset" #define mv_trivial_usage \ "SOURCE DEST\n" \ "or: mv SOURCE... DIRECTORY" #define mv_full_usage \ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY." #define mv_example_usage \ "$ mv /tmp/foo /bin/bar\n" #define nameif_trivial_usage \ "[-s] [-c FILE] [{IFNAME MACADDR}]" #define nameif_full_usage \ "Nameif renaming network interface while it in the down state.\n\n" \ "Options:\n" \ "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \ "\t-s\t\tUse syslog (LOCAL0 facility).\n" \ "\tIFNAME MACADDR\tnew_interface_name interface_mac_address\n" #define nameif_example_usage \ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ " or\n" \ "$ nameif -c /etc/my_mactab_file\n" \ #define nc_trivial_usage \ "[OPTIONS] [IP] [port]" #define nc_full_usage \ "Netcat opens a pipe to IP:port\n\n" \ "Options:\n" \ "\t-l\t\tlisten mode, for inbound connects\n" \ "\t-p PORT\t\tlocal port number\n" \ "\t-i SECS\t\tdelay interval for lines sent\n" \ "\t-e PROG\t\tprogram to exec after connect (dangerous!)" #define nc_example_usage \ "$ nc foobar.somedomain.com 25\n" \ "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ "help\n" \ "214-Commands supported:\n" \ "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ "214 NOOP QUIT RSET HELP\n" \ "quit\n" \ "221 foobar closing connection\n" #define netstat_trivial_usage \ "[-laenrtuwx]" #define netstat_full_usage \ "-l display listening server sockets\n" \ "-a display all sockets (default: connected)\n" \ "-e display other/more information\n" \ "-n don't resolve names\n" \ "-r display routing table\n" \ "-t tcp sockets\n" \ "-u udp sockets\n" \ "-w raw sockets\n" \ "-x unix sockets\n" #define nslookup_trivial_usage \ "[HOST] [SERVER]" #define nslookup_full_usage \ "Queries the nameserver for the IP address of the given HOST\n" \ "optionally using a specified DNS server" #define nslookup_example_usage \ "$ nslookup localhost\n" \ "Server: default\n" \ "Address: default\n" \ "\n" \ "Name: debian\n" \ "Address: 127.0.0.1\n" #define od_trivial_usage \ "[-aBbcDdeFfHhIiLlOovXx] [FILE]" #define od_full_usage \ "Write an unambiguous representation, octal bytes by default, of FILE\n"\ "to standard output. With no FILE, or when FILE is -, read standard input." #define openvt_trivial_usage \ " [ARGS...]" #define openvt_full_usage \ "Start a command on a new virtual terminal" #define openvt_example_usage \ "openvt 2 /bin/ash\n" #ifdef CONFIG_FEATURE_SHA1_PASSWORDS #define PASSWORD_ALG_TYPES(a) a #else #define PASSWORD_ALG_TYPES(a) #endif #define passwd_trivial_usage \ "[OPTION] [name]" #define passwd_full_usage \ "Change a user password. If no name is specified,\n" \ "changes the password for the current user.\n" \ "Options:\n" \ "\t-a\tDefine which algorithm shall be used for the password.\n" \ "\t\t\t(Choices: des, md5" \ PASSWORD_ALG_TYPES(", sha1") \ ")\n\t-d\tDelete the password for the specified user account.\n" \ "\t-l\tLocks (disables) the specified user account.\n" \ "\t-u\tUnlocks (re-enables) the specified user account." #define patch_trivial_usage \ "[-p]" #define patch_full_usage \ "[-p]" #define patch_example_usage \ "$ patch -p1 \t\tprogram to start/check if it is running\n"\ "-u |\tstop this user's processes\n"\ "-n \tstop processes with this name\n"\ "-s \t\tsignal to send (default 15)\n"\ "-a \t\tprogram to start (default )\n" #define strings_trivial_usage \ "[-afo] [-n length] [file ... ]" #define strings_full_usage \ "Display printable strings in a binary file." \ "\n\nOptions:" \ "\n\t-f\tPrecede each string with the name of the file where it was found." \ "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \ "\n\t-o\tEach string is preceded by its decimal offset in the file." #define stty_trivial_usage \ "[-a|g] [-F DEVICE] [SETTING]..." #define stty_full_usage \ "Without arguments, prints baud rate, line discipline," \ "\nand deviations from stty sane." \ "\n\nOptions:" \ "\n\t-F DEVICE\topen device instead of stdin" \ "\n\t-a\t\tprint all current settings in human-readable form" \ "\n\t-g\t\tprint in stty-readable form" \ "\n\t[SETTING]\tsee manpage" #define su_trivial_usage \ "[OPTION]... [-] [username]" #define su_full_usage \ "Change user id or become root.\n" \ "Options:\n" \ "\t-p\tPreserve environment" #define sulogin_trivial_usage \ "[OPTION]... [tty-device]" #define sulogin_full_usage \ "Single user login\n" \ "Options:\n" \ "\t-f\tDo not authenticate (user already authenticated)\n" \ "\t-h\tName of the remote host for this login.\n" \ "\t-p\tPreserve environment." #define swapoff_trivial_usage \ "[OPTION] [DEVICE]" #define swapoff_full_usage \ "Stop swapping virtual memory pages on DEVICE.\n\n" \ "Options:\n" \ "\t-a\tStop swapping on all swap devices" #define swapon_trivial_usage \ "[OPTION] [DEVICE]" #define swapon_full_usage \ "Start swapping virtual memory pages on DEVICE.\n\n" \ "Options:\n" \ "\t-a\tStart swapping on all swap devices" #define sync_trivial_usage \ "" #define sync_full_usage \ "Write all buffered filesystem blocks to disk." #ifdef CONFIG_FEATURE_ROTATE_LOGFILE #define USAGE_ROTATE_LOGFILE(a) a #else #define USAGE_ROTATE_LOGFILE(a) #endif #ifdef CONFIG_FEATURE_REMOTE_LOG #define USAGE_REMOTE_LOG(a) a #else #define USAGE_REMOTE_LOG(a) #endif #ifdef CONFIG_FEATURE_IPC_SYSLOG #define USAGE_IPC_LOG(a) a #else #define USAGE_IPC_LOG(a) #endif #ifdef CONFIG_SYSCTL #define sysctl_trivial_usage \ "[OPTIONS]... [VALUE]...\n" #define sysctl_full_usage "sysctl - configure kernel parameters at runtime\n\n" \ "Options:\n" \ "\t-n\tUse this option to disable printing of the key name when printing values.\n" \ "\t-e\tUse this option to ignore errors about unknown keys.\n" \ "\t-w\tUse this option when you want to change a sysctl setting.\n" \ "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given.\n" \ "\t-a\tDisplay all values currently available.\n" \ "\t-A\tDisplay all values currently available in table form." #define sysctl_example_usage "sysctl [-n] [-e] variable ...\n" \ "sysctl [-n] [-e] -w variable=value ...\n" \ "sysctl [-n] [-e] -a\n" \ "sysctl [-n] [-e] -p \t(default /etc/sysctl.conf)\n" \ "sysctl [-n] [-e] -A\n" #endif #define syslogd_trivial_usage \ "[OPTION]..." #define syslogd_full_usage \ "Linux system and kernel logging utility.\n" \ "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \ "Options:\n" \ "\t-m NUM\t\tInterval between MARK lines (default=20min, 0=off)\n" \ "\t-n\t\tRun as a foreground process\n" \ "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \ USAGE_ROTATE_LOGFILE( \ "\n\t-s SIZE\t\tMax size (KB) bevor rotate (default=200KB, 0=off)\n" \ "\t-b NUM\t\tNumber of rotated log files (default=1, 0=purge log)") \ USAGE_REMOTE_LOG( \ "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \ "\t-L\t\tLog locally and via network logging (default is network only)") \ USAGE_IPC_LOG( \ "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)") #define syslogd_example_usage \ "$ syslogd -R masterlog:514\n" \ "$ syslogd -R 192.168.1.1:601\n" #ifndef CONFIG_FEATURE_FANCY_TAIL #define USAGE_UNSIMPLE_TAIL(a) #else #define USAGE_UNSIMPLE_TAIL(a) a #endif #define tail_trivial_usage \ "[OPTION]... [FILE]..." #define tail_full_usage \ "Print last 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ "Options:\n" \ USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \ "\t-n N[kbm]\tprint last N lines instead of last 10\n" \ "\t-f\t\toutput data as the file grows" \ USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \ "\t-s SEC\t\twait SEC seconds between reads with -f\n" \ "\t-v\t\talways output headers giving file names\n\n" \ "If the first character of N (bytes or lines) is a '+', output begins with \n" \ "the Nth item from the start of each file, otherwise, print the last N items\n" \ "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) #define tail_example_usage \ "$ tail -n 1 /etc/resolv.conf\n" \ "nameserver 10.0.0.1\n" #ifdef CONFIG_FEATURE_TAR_CREATE #define USAGE_TAR_CREATE(a) a #else #define USAGE_TAR_CREATE(a) #endif #ifdef CONFIG_FEATURE_TAR_EXCLUDE #define USAGE_TAR_EXCLUDE(a) a #else #define USAGE_TAR_EXCLUDE(a) #endif #ifdef CONFIG_FEATURE_TAR_GZIP #define USAGE_TAR_GZIP(a) a #else #define USAGE_TAR_GZIP(a) #endif #ifdef CONFIG_FEATURE_TAR_BZIP2 #define USAGE_TAR_BZIP2(a) a #else #define USAGE_TAR_BZIP2(a) #endif #ifdef CONFIG_FEATURE_TAR_COMPRESS #define USAGE_TAR_COMPRESS(a) a #else #define USAGE_TAR_COMPRESS(a) #endif #define tar_trivial_usage \ "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_COMPRESS("Z") "xtvO] " \ USAGE_TAR_EXCLUDE("[-X FILE]") \ "[-f TARFILE] [-C DIR] [FILE(s)] ..." #define tar_full_usage \ "Create, extract, or list files from a tar file.\n\n" \ "Options:\n" \ USAGE_TAR_CREATE("\tc\t\tcreate\n") \ "\tx\t\textract\n" \ "\tt\t\tlist\n" \ "\nArchive format selection:\n" \ USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \ USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \ USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \ "\nFile selection:\n" \ "\tf\t\tname of TARFILE or \"-\" for stdin\n" \ "\tO\t\textract to stdout\n" \ USAGE_TAR_EXCLUDE( \ "\texclude\t\tfile to exclude\n" \ "\tX\t\tfile with names to exclude\n" \ ) \ "\tC\t\tchange to directory DIR before operation\n" \ "\tv\t\tverbosely list files processed" #define tar_example_usage \ "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ "$ tar -cf /tmp/tarball.tar /usr/local\n" #define tee_trivial_usage \ "[OPTION]... [FILE]..." #define tee_full_usage \ "Copy standard input to each FILE, and also to standard output.\n\n" \ "Options:\n" \ "\t-a\tappend to the given FILEs, do not overwrite\n" \ "\t-i\tignore interrupt signals (SIGINT)" #define tee_example_usage \ "$ echo "Hello" | tee /tmp/foo\n" \ "$ cat /tmp/foo\n" \ "Hello\n" #define telnet_trivial_usage \ "HOST [PORT]" #define telnet_full_usage \ "Telnet is used to establish interactive communication with another\n"\ "computer over a network using the TELNET protocol." #ifdef CONFIG_FEATURE_TELNETD_INETD #define telnetd_trivial_usage \ "(inetd mode) [OPTION]" #define telnetd_full_usage \ "Telnetd uses incoming TELNET connections via inetd.\n"\ "Options:\n" \ "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)" #else #define telnetd_trivial_usage \ "[OPTION]" #define telnetd_full_usage \ "Telnetd listens for incoming TELNET connections on PORT.\n"\ "Options:\n" \ "\t-p PORT\tlisten for connections on PORT (default 23)\n"\ "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)" #endif #define test_trivial_usage \ "EXPRESSION\n or [ EXPRESSION ]" #define test_full_usage \ "Checks file types and compares values returning an exit\n" \ "code determined by the value of EXPRESSION." #define test_example_usage \ "$ test 1 -eq 2\n" \ "$ echo $?\n" \ "1\n" \ "$ test 1 -eq 1\n" \ "$ echo $? \n" \ "0\n" \ "$ [ -d /etc ]\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /junk ]\n" \ "$ echo $?\n" \ "1\n" #ifdef CONFIG_FEATURE_TFTP_GET #define USAGE_TFTP_GET(a) a #else #define USAGE_TFTP_GET(a) #endif #ifdef CONFIG_FEATURE_TFTP_PUT #define USAGE_TFTP_PUT(a) a #else #define USAGE_TFTP_PUT(a) #endif #ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE #define USAGE_TFTP_BS(a) a #else #define USAGE_TFTP_BS(a) #endif #define tftp_trivial_usage \ "[OPTION]... HOST [PORT]" #define tftp_full_usage \ "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \ "Options:\n" \ "\t-l FILE\tLocal FILE.\n" \ "\t-r FILE\tRemote FILE.\n" \ USAGE_TFTP_GET( \ "\t-g\tGet file.\n" \ ) \ USAGE_TFTP_PUT( \ "\t-p\tPut file.\n" \ ) \ USAGE_TFTP_BS( \ "\t-b SIZE\tTransfer blocks of SIZE octets.\n" \ ) #define time_trivial_usage \ "[OPTION]... COMMAND [ARGS...]" #define time_full_usage \ "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ "COMMAND's resource usage information is displayed\n\n" \ "Options:\n" \ "\t-v\tDisplays verbose resource usage information." #define top_trivial_usage \ "[-d ]" #define top_full_usage \ "top provides an view of processor activity in real time.\n" \ "This utility reads the status for all processes in /proc each \n" \ "and shows the status for however many processes will fit on the screen.\n" \ "This utility will not show processes that are started after program startup,\n" \ "but it will show the EXIT status for and PIDs that exit while it is running." #define touch_trivial_usage \ "[-c] FILE [FILE ...]" #define touch_full_usage \ "Update the last-modified date on the given FILE[s].\n\n" \ "Options:\n" \ "\t-c\tDo not create any files" #define touch_example_usage \ "$ ls -l /tmp/foo\n" \ "/bin/ls: /tmp/foo: No such file or directory\n" \ "$ touch /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" #define tr_trivial_usage \ "[-cds] STRING1 [STRING2]" #define tr_full_usage \ "Translate, squeeze, and/or delete characters from\n" \ "standard input, writing to standard output.\n\n" \ "Options:\n" \ "\t-c\ttake complement of STRING1\n" \ "\t-d\tdelete input characters coded STRING1\n" \ "\t-s\tsqueeze multiple output characters of STRING2 into one character" #define tr_example_usage \ "$ echo "gdkkn vnqkc" | tr [a-y] [b-z]\n" \ "hello world\n" #define traceroute_trivial_usage \ "[-dnrv] [-m max_ttl] [-p port#] [-q nqueries]\n\ [-s src_addr] [-t tos] [-w wait] host [data size]" #define traceroute_full_usage \ "trace the route ip packets follow going to \"host\"\n" \ "Options:\n" \ "\t-d\tset SO_DEBUG options to socket\n" \ "\t-n\tPrint hop addresses numerically rather than symbolically\n" \ "\t-r\tBypass the normal routing tables and send directly to a host\n" \ "\t-v\tVerbose output\n" \ "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \ "\t-p port#\tSet the base UDP port number used in probes\n" \ "\t\t(default is 33434)\n" \ "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \ "\t\t(default is 3)\n" \ "\t-s src_addr\tUse the following IP address as the source address\n" \ "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \ "\t\t(default 0)\n" \ "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \ "\t\t(default 3 sec.)." #define true_trivial_usage \ "" #define true_full_usage \ "Return an exit code of TRUE (0)." #define true_example_usage \ "$ true\n" \ "$ echo $?\n" \ "0\n" #define tty_trivial_usage \ "" #define tty_full_usage \ "Print the file name of the terminal connected to standard input.\n\n"\ "Options:\n" \ "\t-s\tprint nothing, only return an exit status" #define tty_example_usage \ "$ tty\n" \ "/dev/tty2\n" #define udhcpc_trivial_usage \ "[-fbnqv] [-c CLIENTID] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]" #define udhcpc_full_usage \ "\t-c,\t--clientid=CLIENTID\tClient identifier\n" \ "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \ "\t-h,\t \tAlias for -H\n" \ "\t-f,\t--foreground\tDo not fork after getting lease\n" \ "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated.\n" \ "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \ "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated.\n" \ "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \ "\t-q,\t--quit\tQuit after obtaining lease\n" \ "\t-r,\t--request=IP\tIP address to request (default: none)\n" \ "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \ "\t-v,\t--version\tDisplay version" #define udhcpd_trivial_usage \ "[configfile]\n" \ #define udhcpd_full_usage \ "" #ifdef CONFIG_FEATURE_MOUNT_FORCE #define USAGE_MOUNT_FORCE(a) a #else #define USAGE_MOUNT_FORCE(a) #endif #define umount_trivial_usage \ "[flags] FILESYSTEM|DIRECTORY" #define umount_full_usage \ "Unmount file systems\n" \ "\nFlags:\n" "\t-a\tUnmount all file systems" \ USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \ "\n\t-r\tTry to remount devices as read-only if mount is busy" \ USAGE_MOUNT_FORCE("\n\t-f\tForce umount (i.e., unreachable NFS server)") \ USAGE_MOUNT_LOOP("\n\t-l\tDo not free loop device (if a loop device has been used)") #define umount_example_usage \ "$ umount /dev/hdc1 \n" #define uname_trivial_usage \ "[OPTION]..." #define uname_full_usage \ "Print certain system information. With no OPTION, same as -s.\n\n" \ "Options:\n" \ "\t-a\tprint all information\n" \ "\t-m\tthe machine (hardware) type\n" \ "\t-n\tprint the machine's network node hostname\n" \ "\t-r\tprint the operating system release\n" \ "\t-s\tprint the operating system name\n" \ "\t-p\tprint the host processor type\n" \ "\t-v\tprint the operating system version" #define uname_example_usage \ "$ uname -a\n" \ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" #define uncompress_trivial_usage \ "[-c] [-f] [ name ... ]" #define uncompress_full_usage \ "Uncompress .Z file[s]\n" \ "Options:\n" \ "\t-c\textract to stdout\n" \ "\t-f\tforce overwrite an existing file\n" #define uniq_trivial_usage \ "[OPTION]... [INPUT [OUTPUT]]" #define uniq_full_usage \ "Discard all but one of successive identical lines from INPUT\n" \ "(or standard input), writing to OUTPUT (or standard output).\n\n" \ "Options:\n" \ "\t-c\tprefix lines by the number of occurrences\n" \ "\t-d\tonly print duplicate lines\n" \ "\t-u\tonly print unique lines\n" \ "\t-f N\tskip the first N fields\n" \ "\t-s N\tskip the first N chars (after any skipped fields)" #define uniq_example_usage \ "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ "a\n" \ "b\n" \ "c\n" #define unix2dos_trivial_usage \ "[option] [FILE]" #define unix2dos_full_usage \ "Converts FILE from unix format to dos format. When no option\n" \ "is given, the input is converted to the opposite output format.\n" \ "When no file is given, uses stdin for input and stdout for output.\n" \ "Options:\n" \ "\t-u\toutput will be in UNIX format\n" \ "\t-d\toutput will be in DOS format" #define unzip_trivial_usage \ "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" #define unzip_full_usage \ "Extracts files from ZIP archives.\n\n" \ "Options:\n" \ "\t-l\tlist archive contents (short form)\n" \ "\t-n\tnever overwrite existing files (default)\n" \ "\t-o\toverwrite files without prompting\n" \ "\t-p\tsend output to stdout\n" \ "\t-q\tbe quiet\n" \ "\t-x\texclude these files\n" \ "\t-d\textract files into this directory" #define uptime_trivial_usage \ "" #define uptime_full_usage \ "Display the time since the last boot." #define uptime_example_usage \ "$ uptime\n" \ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" #define usleep_trivial_usage \ "N" #define usleep_full_usage \ "Pause for N microseconds." #define usleep_example_usage \ "$ usleep 1000000\n" \ "[pauses for 1 second]\n" #define uudecode_trivial_usage \ "[FILE]..." #define uudecode_full_usage \ "Uudecode a file that is uuencoded.\n\n" \ "Options:\n" \ "\t-o FILE\tdirect output to FILE" #define uudecode_example_usage \ "$ uudecode -o busybox busybox.uu\n" \ "$ ls -l busybox\n" \ "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" #define uuencode_trivial_usage \ "[OPTION] [INFILE] REMOTEFILE" #define uuencode_full_usage \ "Uuencode a file.\n\n" \ "Options:\n" \ "\t-m\tuse base64 encoding per RFC1521" #define uuencode_example_usage \ "$ uuencode busybox busybox\n" \ "begin 755 busybox\n" \ "\n" \ "$ uudecode busybox busybox > busybox.uu\n" \ "$\n" #define vconfig_trivial_usage \ "COMMAND [OPTIONS] ..." #define vconfig_full_usage \ "Usage: add [interface-name] [vlan_id] \n" \ " rem [vlan-name] \n" \ " set_flag [interface-name] [flag-num] [0 | 1] \n" \ " set_egress_map [vlan-name] [skb_priority] [vlan_qos] \n" \ " set_ingress_map [vlan-name] [skb_priority] [vlan_qos] \n" \ " set_name_type [name-type] \n" #define vi_trivial_usage \ "[OPTION] [FILE]..." #define vi_full_usage \ "edit FILE.\n\n" \ "Options:\n" \ "\t-R\tRead-only- do not write to the file." #define vlock_trivial_usage \ "[OPTIONS]" #define vlock_full_usage \ "Lock a virtual terminal. A password is required to unlock\n" \ "Options:\n" \ "\t-a\tLock all VTs" #define watch_trivial_usage \ "[-n ] COMMAND..." #define watch_full_usage \ "Executes a program periodically.\n" \ "Options:\n" \ "\t-n\tLoop period in seconds - default is 2." #define watch_example_usage \ "$ watch date\n" \ "Mon Dec 17 10:31:40 GMT 2000\n" \ "Mon Dec 17 10:31:42 GMT 2000\n" \ "Mon Dec 17 10:31:44 GMT 2000" #define watchdog_trivial_usage \ "[-t ] DEV" #define watchdog_full_usage \ "Periodically write to watchdog device DEV.\n" \ "Options:\n" \ "\t-t\tTimer period in seconds - default is 30." #define wc_trivial_usage \ "[OPTION]... [FILE]..." #define wc_full_usage \ "Print line, word, and byte counts for each FILE, and a total line if\n" \ "more than one FILE is specified. With no FILE, read standard input.\n\n" \ "Options:\n" \ "\t-c\tprint the byte counts\n" \ "\t-l\tprint the newline counts\n" \ "\t-L\tprint the length of the longest line\n" \ "\t-w\tprint the word counts" #define wc_example_usage \ "$ wc /etc/passwd\n" \ " 31 46 1365 /etc/passwd\n" #define wget_trivial_usage \ "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url" #define wget_full_usage \ "wget retrieves files via HTTP or FTP\n\n" \ "Options:\n" \ "\t-c\tcontinue retrieval of aborted transfers\n" \ "\t-q\tquiet mode - do not print\n" \ "\t-P\tSet directory prefix to DIR\n" \ "\t-O\tsave to filename ('-' for stdout)\n" \ "\t-Y\tuse proxy ('on' or 'off')" #define which_trivial_usage \ "[COMMAND ...]" #define which_full_usage \ "Locates a COMMAND." #define which_example_usage \ "$ which login\n" \ "/bin/login\n" #define who_trivial_usage \ " " #define who_full_usage \ "Prints the current user names and related information" #define whoami_trivial_usage \ "" #define whoami_full_usage \ "Prints the user name associated with the current effective user id." #ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION #define USAGE_XARGS_CONFIRMATION(a) a #else #define USAGE_XARGS_CONFIRMATION(a) #endif #ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT #define USAGE_XARGS_TERMOPT(a) a #else #define USAGE_XARGS_TERMOPT(a) #endif #ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM #define USAGE_XARGS_ZERO_TERM(a) a #else #define USAGE_XARGS_ZERO_TERM(a) #endif #define xargs_trivial_usage \ "[COMMAND] [OPTIONS] [ARGS...]" #define xargs_full_usage \ "Executes COMMAND on every item given by standard input.\n\n" \ "Options:\n" \ USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \ "\t-r\tDo not run command for empty readed lines\n" \ USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \ USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \ "\t-t\tPrint the command line on stderr before executing it." #define xargs_example_usage \ "$ ls | xargs gzip\n" \ "$ find . -name '*.c' -print | xargs rm\n" #define yes_trivial_usage \ "[OPTION]... [STRING]..." #define yes_full_usage \ "Repeatedly outputs a line with all specified STRING(s), or 'y'." #define zcat_trivial_usage \ "FILE" #define zcat_full_usage \ "Uncompress to stdout."