/* vi: set sw=8 ts=8: */ /* * This file suffers from chronically incorrect tabification * of messages. Before editing this file: * 1. Switch you editor to 8-space tab mode. * 2. Do not use \t in messages, use real tab character. * 3. Start each source line with message as follows: * |<7 spaces>"text with tabs".... * or * |<5 spaces>"\ntext with tabs".... */ #ifndef __BB_USAGE_H__ #define __BB_USAGE_H__ #define NOUSAGE_STR "\b" #define addgroup_trivial_usage \ "[-g GID] " USE_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name" #define addgroup_full_usage "\n\n" \ "Add a group " USE_FEATURE_ADDUSER_TO_GROUP("or add an user to a group") "\n" \ "\nOptions:" \ "\n -g GID Group id" \ #define adduser_trivial_usage \ "[OPTIONS] user_name" #define adduser_full_usage "\n\n" \ "Add an user\n" \ "\nOptions:" \ "\n -h DIR Home directory" \ "\n -g GECOS GECOS field" \ "\n -s SHELL Login shell" \ "\n -G GROUP Add user to existing group" \ "\n -S Create a system user" \ "\n -D Do not assign a password" \ "\n -H Do not create home directory" \ #define adjtimex_trivial_usage \ "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" #define adjtimex_full_usage "\n\n" \ "Read and optionally set system timebase parameters. See adjtimex(2).\n" \ "\nOptions:" \ "\n -q Quiet" \ "\n -o offset Time offset, microseconds" \ "\n -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)" \ "\n (positive values make clock run faster)" \ "\n -t tick Microseconds per tick, usually 10000" \ "\n -p timeconstant" \ #define ar_trivial_usage \ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" #define ar_full_usage "\n\n" \ "Extract or list FILES from an ar archive\n" \ "\nOptions:" \ "\n -o Preserve original dates" \ "\n -p Extract to stdout" \ "\n -t List" \ "\n -x Extract" \ "\n -v Verbose" \ #define arp_trivial_usage \ "\n" \ "[-vn] [-H type] [-i if] -a [hostname]\n" \ "[-v] [-i if] -d hostname [pub]\n" \ "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \ "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \ "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n" #define arp_full_usage "\n\n" \ "Manipulate ARP cache\n" \ "\nOptions:" \ "\n -a Display (all) hosts" \ "\n -s Set new ARP entry" \ "\n -d Delete a specified entry" \ "\n -v Verbose" \ "\n -n Don't resolve names" \ "\n -i IF Network interface" \ "\n -D Read from given device" \ "\n -A, -p AF Protocol family" \ "\n -H HWTYPE Hardware address type" \ #define arping_trivial_usage \ "[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target" #define arping_full_usage "\n\n" \ "Send ARP requests/replies\n" \ "\nOptions:" \ "\n -f Quit on first ARP reply" \ "\n -q Quiet" \ "\n -b Keep broadcasting, don't go unicast" \ "\n -D Duplicated address detection mode" \ "\n -U Unsolicited ARP mode, update your neighbors" \ "\n -A ARP answer mode, update your neighbors" \ "\n -c N Stop after sending N ARP requests" \ "\n -w timeout Time to wait for ARP reply, in seconds" \ "\n -I dev Interface to use (default eth0)" \ "\n -s sender Sender IP address" \ "\n target Target IP address" \ #define sh_trivial_usage NOUSAGE_STR #define sh_full_usage "" #define ash_trivial_usage NOUSAGE_STR #define ash_full_usage "" #define hush_trivial_usage NOUSAGE_STR #define hush_full_usage "" #define msh_trivial_usage NOUSAGE_STR #define msh_full_usage "" #define awk_trivial_usage \ "[OPTION]... [program-text] [FILE...]" #define awk_full_usage "\n\n" \ "Options:" \ "\n -v var=val Set variable" \ "\n -F sep Use sep as field separator" \ "\n -f file Read program from file" \ #define basename_trivial_usage \ "FILE [SUFFIX]" #define basename_full_usage "\n\n" \ "Strip directory path and suffixes from FILE.\n" \ "If specified, also remove any trailing SUFFIX." #define basename_example_usage \ "$ basename /usr/local/bin/foo\n" \ "foo\n" \ "$ basename /usr/local/bin/\n" \ "bin\n" \ "$ basename /foo/bar.txt .txt\n" \ "bar" #define fbsplash_trivial_usage \ "-s IMGFILE [-c] [-d DEV] [-i INIFILE] [-f CMD]" #define fbsplash_full_usage "\n\n" \ "Options:\n" \ "\n -s Image" \ "\n -c Hide cursor" \ "\n -d Framebuffer device (default /dev/fb0)" \ "\n -i Config file (var=value):" \ "\n BAR_LEFT,BAR_TOP,BAR_WIDTH,BAR_HEIGHT" \ "\n BAR_R,BAR_G,BAR_B" \ "\n -f Control pipe (else exit after drawing image)" \ "\n commands: 'NN' (% for progress bar) or 'exit'" \ #define brctl_trivial_usage \ "COMMAND [BRIDGE [INTERFACE]]" #define brctl_full_usage "\n\n" \ "Manage ethernet bridges.\n" \ "\nCommands:" \ USE_FEATURE_BRCTL_SHOW( \ "\n show Show a list of bridges" \ ) \ "\n addbr BRIDGE Create BRIDGE" \ "\n delbr BRIDGE Delete BRIDGE" \ "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \ "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \ USE_FEATURE_BRCTL_FANCY( \ "\n setageing BRIDGE TIME Set ageing time" \ "\n setfd BRIDGE TIME Set bridge forward delay" \ "\n sethello BRIDGE TIME Set hello time" \ "\n setmaxage BRIDGE TIME Set max message age" \ "\n setpathcost BRIDGE COST Set path cost" \ "\n setportprio BRIDGE PRIO Set port priority" \ "\n setbridgeprio BRIDGE PRIO Set bridge priority" \ "\n stp BRIDGE [1|0] STP on/off" \ ) \ #define bunzip2_trivial_usage \ "[OPTION]... [FILE]" #define bunzip2_full_usage "\n\n" \ "Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \ "\nOptions:" \ "\n -c Write to standard output" \ "\n -f Force" \ #define bzip2_trivial_usage \ "[OPTION]... [FILE]..." #define bzip2_full_usage "\n\n" \ "Compress FILE(s) with bzip2 algorithm.\n" \ "When FILE is '-' or unspecified, reads standard input. Implies -c.\n" \ "\nOptions:" \ "\n -c Write to standard output" \ "\n -d Decompress" \ "\n -f Force" \ "\n -1..-9 Compression level" \ #define busybox_notes_usage \ "Hello world!\n" #define bzcat_trivial_usage \ "FILE" #define bzcat_full_usage "\n\n" \ "Uncompress to stdout" #define unlzma_trivial_usage \ "[OPTION]... [FILE]" #define unlzma_full_usage "\n\n" \ "Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \ "\nOptions:" \ "\n -c Write to standard output" \ "\n -f Force" \ #define lzmacat_trivial_usage \ "FILE" #define lzmacat_full_usage "\n\n" \ "Uncompress to stdout" #define cal_trivial_usage \ "[-jy] [[month] year]" #define cal_full_usage "\n\n" \ "Display a calendar\n" \ "\nOptions:" \ "\n -j Use julian dates" \ "\n -y Display the entire year" \ #define cat_trivial_usage \ "[-u] [FILE]..." #define cat_full_usage "\n\n" \ "Concatenate FILE(s) and print them to stdout\n" \ "\nOptions:" \ "\n -u Use unbuffered i/o (ignored)" \ #define cat_example_usage \ "$ cat /proc/uptime\n" \ "110716.72 17.67" #define catv_trivial_usage \ "[-etv] [FILE]..." #define catv_full_usage "\n\n" \ "Display nonprinting characters as ^x or M-x\n" \ "\nOptions:" \ "\n -e End each line with $" \ "\n -t Show tabs as ^I" \ "\n -v Don't use ^x or M-x escapes" \ #define chat_trivial_usage \ "EXPECT [SEND [EXPECT [SEND...]]]" #define chat_full_usage "\n\n" \ "Useful for interacting with a modem connected to stdin/stdout.\n" \ "A script consists of one or more \"expect-send\" pairs of strings,\n" \ "each pair is a pair of arguments. Example:\n" \ "chat '' ATZ OK ATD123456 CONNECT '' ogin: pppuser word: ppppass '~'" \ #define chattr_trivial_usage \ "[-R] [-+=AacDdijsStTu] [-v version] files..." #define chattr_full_usage "\n\n" \ "Change file attributes on an ext2 fs\n" \ "\nModifiers:" \ "\n - Remove attributes" \ "\n + Add attributes" \ "\n = Set attributes" \ "\nAttributes:" \ "\n A Don't track atime" \ "\n a Append mode only" \ "\n c Enable compress" \ "\n D Write dir contents synchronously" \ "\n d Do not backup with dump" \ "\n i Cannot be modified (immutable)" \ "\n j Write all data to journal first" \ "\n s Zero disk storage when deleted" \ "\n S Write file contents synchronously" \ "\n t Disable tail-merging of partial blocks with other files" \ "\n u Allow file to be undeleted" \ "\nOptions:" \ "\n -R Recursively list subdirectories" \ "\n -v Set the file's version/generation number" \ #define chcon_trivial_usage \ "[OPTIONS] CONTEXT FILE..." \ "\n chcon [OPTIONS] [-u USER] [-r ROLE] [-l RANGE] [-t TYPE] FILE..." \ USE_FEATURE_CHCON_LONG_OPTIONS( \ "\n chcon [OPTIONS] --reference=RFILE FILE..." \ ) #define chcon_full_usage "\n\n" \ "Change the security context of each FILE to CONTEXT\n" \ USE_FEATURE_CHCON_LONG_OPTIONS( \ "\n -v,--verbose Verbose" \ "\n -c,--changes Report changes made" \ "\n -h,--no-dereference Affect symlinks instead of their targets" \ "\n -f,--silent,--quiet Suppress most error messages" \ "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \ "\n -u,--user=USER Set user/role/type/range in the target" \ "\n -r,--role=ROLE security context" \ "\n -t,--type=TYPE" \ "\n -l,--range=RANGE" \ "\n -R,--recursive Recurse subdirectories" \ ) \ SKIP_FEATURE_CHCON_LONG_OPTIONS( \ "\n -v Verbose" \ "\n -c Report changes made" \ "\n -h Affect symlinks instead of their targets" \ "\n -f Suppress most error messages" \ "\n -u USER Set user/role/type/range in the target security context" \ "\n -r ROLE" \ "\n -t TYPE" \ "\n -l RNG" \ "\n -R Recurse subdirectories" \ ) #define chmod_trivial_usage \ "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..." #define chmod_full_usage "\n\n" \ "Each MODE is one or more of the letters ugoa, one of the\n" \ "symbols +-= and one or more of the letters rwxst\n" \ "\nOptions:" \ "\n -R Recurse directories" \ USE_DESKTOP( \ "\n -c List changed files" \ "\n -v List all files" \ "\n -f Hide errors" \ ) #define chmod_example_usage \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ "$ chmod u+x /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ "$ chmod 444 /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" #define chgrp_trivial_usage \ "[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..." #define chgrp_full_usage "\n\n" \ "Change the group membership of each FILE to GROUP\n" \ "\nOptions:" \ "\n -R Recurse directories" \ "\n -h Affect symlinks instead of symlink targets" \ "\n -L Traverse all symlinks to directories" \ "\n -H Traverse symlinks on command line only" \ "\n -P Do not traverse symlinks (default)" \ USE_DESKTOP( \ "\n -c List changed files" \ "\n -v Verbose" \ "\n -f Hide errors" \ ) #define chgrp_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chgrp root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" #define chown_trivial_usage \ "[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." #define chown_full_usage "\n\n" \ "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \ "\nOptions:" \ "\n -R Recurse directories" \ "\n -h Affect symlinks instead of symlink targets" \ "\n -L Traverse all symlinks to directories" \ "\n -H Traverse symlinks on command line only" \ "\n -P Do not traverse symlinks (default)" \ USE_DESKTOP( \ "\n -c List changed files" \ "\n -v List all files" \ "\n -f Hide errors" \ ) #define chown_example_usage \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ "$ chown root.root /tmp/foo\n" \ "ls -l /tmp/foo\n" \ "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" #define chpst_trivial_usage \ "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \ "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \ "[-p processes] [-f bytes] [-c bytes] prog args" #define chpst_full_usage "\n\n" \ "Change the process state and run specified program\n" \ "\nOptions:" \ "\n -u USER[:GRP] Set uid and gid" \ "\n -U USER[:GRP] Set $UID and $GID in environment" \ "\n -e DIR Set environment variables as specified by files" \ "\n in DIR: file=1st_line_of_file" \ "\n -/ DIR Chroot to DIR" \ "\n -n INC Add INC to nice value" \ "\n -m BYTES Limit data segment, stack segment, locked physical pages," \ "\n and total of all segment per process to BYTES each" \ "\n -d BYTES Limit data segment" \ "\n -o N Limit the number of open file descriptors per process to N" \ "\n -p N Limit number of processes per uid to N" \ "\n -f BYTES Limit output file size to BYTES" \ "\n -c BYTES Limit core file size to BYTES" \ "\n -v Verbose" \ "\n -P Run prog in a new process group" \ "\n -0 Close standard input" \ "\n -1 Close standard output" \ "\n -2 Close standard error" \ #define setuidgid_trivial_usage \ "account prog args" #define setuidgid_full_usage "\n\n" \ "Set uid and gid to account's uid and gid, removing all supplementary\n" \ "groups, then run prog" #define envuidgid_trivial_usage \ "account prog args" #define envuidgid_full_usage "\n\n" \ "Set $UID to account's uid and $GID to account's gid, then run prog" #define envdir_trivial_usage \ "dir prog args" #define envdir_full_usage "\n\n" \ "Set various environment variables as specified by files\n" \ "in the directory dir, then run prog" #define softlimit_trivial_usage \ "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \ "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \ "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args" #define softlimit_full_usage "\n\n" \ "Set soft resource limits, then run prog\n" \ "\nOptions:" \ "\n -m n Same as -d n -s n -l n -a n" \ "\n -d n Limit the data segment per process to n bytes" \ "\n -s n Limit the stack segment per process to n bytes" \ "\n -l n Limit the locked physical pages per process to n bytes" \ "\n -a n Limit the total of all segments per process to n bytes" \ "\n -o n Limit the number of open file descriptors per process to n" \ "\n -p n Limit the number of processes per uid to n" \ "\nOptions controlling file sizes:" \ "\n -f n Limit output file sizes to n bytes" \ "\n -c n Limit core file sizes to n bytes" \ "\nEfficiency opts:" \ "\n -r n Limit the resident set size to n bytes. This limit is not" \ "\n enforced unless physical memory is full" \ "\n -t n Limit the CPU time to n seconds. This limit is not enforced" \ "\n except that the process receives a SIGXCPU signal after n seconds" \ "\n" \ "\nSome options may have no effect on some operating systems" \ "\nn may be =, indicating that soft limit should be set equal to hard limit" \ #define chroot_trivial_usage \ "NEWROOT [COMMAND...]" #define chroot_full_usage "\n\n" \ "Run COMMAND with root directory set to NEWROOT" #define chroot_example_usage \ "$ ls -l /bin/ls\n" \ "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ "# mount /dev/hdc1 /mnt -t minix\n" \ "# chroot /mnt\n" \ "# ls -l /bin/ls\n" \ "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" #define chvt_trivial_usage \ "N" #define chvt_full_usage "\n\n" \ "Change the foreground virtual terminal to /dev/ttyN" #define cksum_trivial_usage \ "FILES..." #define cksum_full_usage "\n\n" \ "Calculate the CRC32 checksums of FILES" #define clear_trivial_usage \ "" #define clear_full_usage "\n\n" \ "Clear screen" #define cmp_trivial_usage \ "[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]" #define cmp_full_usage "\n\n" \ "Compares FILE1 vs stdin if FILE2 is not specified\n" \ "\nOptions:" \ "\n -l Write the byte numbers (decimal) and values (octal)" \ "\n for all differing bytes" \ "\n -s Quiet" \ #define comm_trivial_usage \ "[-123] FILE1 FILE2" #define comm_full_usage "\n\n" \ "Compare FILE1 to FILE2, or to stdin if - is specified\n" \ "\nOptions:" \ "\n -1 Suppress lines unique to FILE1" \ "\n -2 Suppress lines unique to FILE2" \ "\n -3 Suppress lines common to both files" \ #define bbconfig_trivial_usage \ "" #define bbconfig_full_usage "\n\n" \ "Print the config file which built busybox" #define bbsh_trivial_usage \ "[FILE]...\n" \ "or: bbsh -c command [args]..." #define bbsh_full_usage "\n\n" \ "The bbsh shell (command interpreter)" #define chrt_trivial_usage \ "[OPTION]... [prio] [pid | command [arg]...]" #define chrt_full_usage "\n\n" \ "Manipulate real-time attributes of a process\n" \ "\nOptions:" \ "\n -p Operate on pid" \ "\n -r Set scheduling policy to SCHED_RR" \ "\n -f Set scheduling policy to SCHED_FIFO" \ "\n -o Set scheduling policy to SCHED_OTHER" \ "\n -m Show min and max priorities" \ #define chrt_example_usage \ "$ chrt -r 4 sleep 900; x=$!\n" \ "$ chrt -f -p 3 $x\n" \ "You need CAP_SYS_NICE privileges to set scheduling attributes of a process" #define cp_trivial_usage \ "[OPTION]... SOURCE DEST" #define cp_full_usage "\n\n" \ "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \ "\nOptions:" \ "\n -a Same as -dpR" \ USE_SELINUX( \ "\n -c Preserve security context" \ ) \ "\n -d,-P Preserve links" \ "\n -H,-L Dereference all symlinks (default)" \ "\n -p Preserve file attributes if possible" \ "\n -f Force overwrite" \ "\n -i Prompt before overwrite" \ "\n -R,-r Recurse directories" \ "\n -l,-s Create (sym)links" \ #define cpio_trivial_usage \ "-[dim" USE_FEATURE_CPIO_O("o") "tuv][F cpiofile]" \ USE_FEATURE_CPIO_O( "[H newc]" ) #define cpio_full_usage "\n\n" \ "Extract or list files from a cpio archive" \ USE_FEATURE_CPIO_O( ", or create a cpio archive" ) \ "\n" \ "Main operation mode:" \ "\n d Make leading directories" \ "\n i Extract" \ "\n m Preserve mtime" \ USE_FEATURE_CPIO_O( \ "\n o Create" \ "\n H newc Define format" \ ) \ "\n t List" \ "\n v Verbose" \ "\n u Unconditional overwrite" \ "\n F Input from file" \ #define crond_trivial_usage \ "-fbS -l N " USE_DEBUG_CROND_OPTION("-d N ") "-L LOGFILE -c DIR" #define crond_full_usage "\n\n" \ " -f Foreground" \ "\n -b Background (default)" \ "\n -S Log to syslog (default)" \ "\n -l Set log level. 0 is the most verbose, default 8" \ USE_DEBUG_CROND_OPTION( \ "\n -d Set log level, log to stderr" \ ) \ "\n -L Log to file" \ "\n -c Working dir" \ #define crontab_trivial_usage \ "[-c DIR] [-u USER] [-ler]|[FILE]" #define crontab_full_usage "\n\n" \ " -c Crontab directory" \ "\n -u User" \ "\n -l List crontab" \ "\n -e Edit crontab" \ "\n -r Delete crontab" \ "\n FILE Replace crontab by FILE ('-': stdin)" \ #define cryptpw_trivial_usage \ "[-a des|md5] [string]" #define cryptpw_full_usage "\n\n" \ "Output crypted string.\n" \ "If string isn't supplied on cmdline, read it from stdin.\n" \ "\nOptions:" \ "\n -a Algorithm to use (default: md5)" \ #define cttyhack_trivial_usage NOUSAGE_STR #define cttyhack_full_usage "" #define cut_trivial_usage \ "[OPTION]... [FILE]..." #define cut_full_usage "\n\n" \ "Print selected fields from each input FILE to standard output\n" \ "\nOptions:" \ "\n -b LIST Output only bytes from LIST" \ "\n -c LIST Output only characters from LIST" \ "\n -d CHAR Use CHAR instead of tab as the field delimiter" \ "\n -s Output only the lines containing delimiter" \ "\n -f N Print only these fields" \ "\n -n Ignored" \ #define cut_example_usage \ "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ "Hello\n" \ "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ "world\n" #define date_trivial_usage \ "[OPTION]... [+FMT] [TIME]" #define date_full_usage "\n\n" \ "Display time (using +FMT), or set time\n" \ "\nOptions:" \ "\n -u Work in UTC (don't convert to local time)" \ "\n -R Output RFC-822 compliant date string" \ USE_FEATURE_DATE_ISOFMT( \ "\n -I[SPEC] Output ISO-8601 compliant date string" \ "\n SPEC='date' (default) for date only," \ "\n 'hours', 'minutes', or 'seconds' for date and" \ "\n time to the indicated precision" \ ) \ "\n -d TIME Display TIME, not 'now'" \ "\n -r FILE Display last modification time of FILE" \ "\n [-s] TIME Set time to TIME" \ USE_FEATURE_DATE_ISOFMT( \ "\n -D FMT Use FMT for str->date conversion" \ ) \ "\n" \ "\nRecognized formats for TIME:" \ "\n hh:mm[:ss]" \ "\n [YYYY.]MM.DD-hh:mm[:ss]" \ "\n YYYY-MM-DD hh:mm[:ss]" \ "\n MMDDhhmm[[YY]YY][.ss]" \ #define date_example_usage \ "$ date\n" \ "Wed Apr 12 18:52:41 MDT 2000\n" #define dc_trivial_usage \ "expression..." #define dc_full_usage "\n\n" \ "Tiny RPN calculator. Operations:\n" \ "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor,\n" \ "p - print top of the stack (without altering the stack),\n" \ "f - print entire stack, o - pop the value and set output radix\n" \ "(value must be 10 or 16).\n" \ "Examples: 'dc 2 2 add' -> 4, 'dc 8 8 * 2 2 + /' -> 16.\n" \ #define dc_example_usage \ "$ dc 2 2 + p\n" \ "4\n" \ "$ dc 8 8 \\* 2 2 + / p\n" \ "16\n" \ "$ dc 0 1 and p\n" \ "0\n" \ "$ dc 0 1 or p\n" \ "1\n" \ "$ echo 72 9 div 8 mul p | dc\n" \ "64\n" #define dd_trivial_usage \ "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync|fsync]") #define dd_full_usage "\n\n" \ "Copy a file with converting and formatting\n" \ "\nOptions:" \ "\n if=FILE Read from FILE instead of stdin" \ "\n of=FILE Write to FILE instead of stdout" \ "\n bs=N Read and write N bytes at a time" \ USE_FEATURE_DD_IBS_OBS( \ "\n ibs=N Read N bytes at a time" \ ) \ USE_FEATURE_DD_IBS_OBS( \ "\n obs=N Write N bytes at a time" \ ) \ "\n count=N Copy only N input blocks" \ "\n skip=N Skip N input blocks" \ "\n seek=N Skip N output blocks" \ USE_FEATURE_DD_IBS_OBS( \ "\n conv=notrunc Don't truncate output file" \ "\n conv=noerror Continue after read errors" \ "\n conv=sync Pad blocks with zeros" \ "\n conv=fsync Physically write data out before finishing" \ ) \ "\n" \ "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \ "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \ #define dd_example_usage \ "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ "4+0 records in\n" \ "4+0 records out\n" #define deallocvt_trivial_usage \ "[N]" #define deallocvt_full_usage "\n\n" \ "Deallocate unused virtual terminal /dev/ttyN" #define delgroup_trivial_usage \ USE_FEATURE_DEL_USER_FROM_GROUP("[USER] ")"GROUP" #define delgroup_full_usage "\n\n" \ "Delete group GROUP from the system" \ USE_FEATURE_DEL_USER_FROM_GROUP(" or user USER from group GROUP") #define deluser_trivial_usage \ "USER" #define deluser_full_usage "\n\n" \ "Delete user USER from the system" #define depmod_trivial_usage \ "" #define depmod_full_usage \ "\n" \ "\n" #define devfsd_trivial_usage \ "mntpnt [-v]" USE_DEVFSD_FG_NP("[-fg][-np]") #define devfsd_full_usage "\n\n" \ "Manage devfs permissions and old device name symlinks\n" \ "\nOptions:" \ "\n mntpnt The mount point where devfs is mounted" \ "\n -v Print the protocol version numbers for devfsd" \ "\n and the kernel-side protocol version and exit" \ USE_DEVFSD_FG_NP( \ "\n -fg Run in foreground" \ "\n -np Exit after parsing the configuration file" \ "\n and processing synthetic REGISTER events," \ "\n do not poll for events" \ ) /* -k is accepted but ignored for !HUMAN_READABLE, * but we won't mention this (unimportant) */ #if ENABLE_FEATURE_HUMAN_READABLE || ENABLE_FEATURE_DF_INODE #define DF_HAS_OPTIONS(x) x #else #define DF_HAS_OPTIONS(x) #endif #define df_trivial_usage \ DF_HAS_OPTIONS("[-") \ USE_FEATURE_HUMAN_READABLE("hmk") USE_FEATURE_DF_INODE("i") \ DF_HAS_OPTIONS("] ") "[FILESYSTEM...]" #define df_full_usage "\n\n" \ "Print filesystem usage statistics\n" \ DF_HAS_OPTIONS("\nOptions:") \ USE_FEATURE_HUMAN_READABLE( \ "\n -h Human readable (e.g. 1K 243M 2G)" \ "\n -m 1024*1024 blocks" \ "\n -k 1024 blocks" \ ) \ USE_FEATURE_DF_INODE( \ "\n -i Inodes" \ ) #define df_example_usage \ "$ df\n" \ "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" \ "/dev/sda1 64216 36364 27852 57% /boot\n" \ "$ df /dev/sda3\n" \ "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ "/dev/sda3 8690864 8553540 137324 98% /\n" #define dhcprelay_trivial_usage \ "[client1,client2,...] [server_device]" #define dhcprelay_full_usage "\n\n" \ "Relay dhcp requests from client devices to server device.\n" \ "Pass clients as CSV" #define diff_trivial_usage \ "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" #define diff_full_usage "\n\n" \ "Compare files line by line and output the differences between them.\n" \ "This implementation supports unified diffs only.\n" \ "\nOptions:" \ "\n -a Treat all files as text" \ "\n -b Ignore changes in the amount of whitespace" \ "\n -d Try hard to find a smaller set of changes" \ "\n -i Ignore case differences" \ "\n -L Use LABEL instead of the filename in the unified header" \ "\n -N Treat absent files as empty" \ "\n -q Output only whether files differ" \ "\n -r Recursively compare subdirectories" \ "\n -S Start with FILE when comparing directories" \ "\n -T Make tabs line up by prefixing a tab when necessary" \ "\n -s Report when two files are the same" \ "\n -t Expand tabs to spaces in output" \ "\n -U Output LINES lines of context" \ "\n -w Ignore all whitespace" \ #define dirname_trivial_usage \ "FILENAME" #define dirname_full_usage "\n\n" \ "Strip non-directory suffix from FILENAME" #define dirname_example_usage \ "$ dirname /tmp/foo\n" \ "/tmp\n" \ "$ dirname /tmp/foo/\n" \ "/tmp\n" #define dmesg_trivial_usage \ "[-c] [-n LEVEL] [-s SIZE]" #define dmesg_full_usage "\n\n" \ "Print or control the kernel ring buffer\n" \ "\nOptions:" \ "\n -c Clear ring buffer after printing" \ "\n -n LEVEL Set console logging level" \ "\n -s SIZE Buffer size" \ #define dnsd_trivial_usage \ "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" #define dnsd_full_usage "\n\n" \ "Small static DNS server daemon\n" \ "\nOptions:" \ "\n -c Config filename" \ "\n -t TTL in seconds" \ "\n -p Listening port" \ "\n -i Listening ip (default all)" \ "\n -d Daemonize" \ #define dos2unix_trivial_usage \ "[option] [FILE]" #define dos2unix_full_usage "\n\n" \ "Convert FILE from dos to unix format.\n" \ "When no file is given, use stdin/stdout.\n" \ "\nOptions:" \ "\n -u dos2unix" \ "\n -d unix2dos" \ #define dpkg_trivial_usage \ "[-ilCPru] [-F option] package_name" #define dpkg_full_usage "\n\n" \ "Install, remove and manage Debian packages\n" \ "\nOptions:" \ "\n -i Install the package" \ "\n -l List of installed packages" \ "\n -C Configure an unpackaged package" \ "\n -F depends Ignore dependency problems" \ "\n -P Purge all files of a package" \ "\n -r Remove all but the configuration files for a package" \ "\n -u Unpack a package, but don't configure it" \ #define dpkg_deb_trivial_usage \ "[-cefxX] FILE [argument]" #define dpkg_deb_full_usage "\n\n" \ "Perform actions on Debian packages (.debs)\n" \ "\nOptions:" \ "\n -c List contents of filesystem tree" \ "\n -e Extract control files to [argument] directory" \ "\n -f Display control field name starting with [argument]" \ "\n -x Extract packages filesystem tree to directory" \ "\n -X Verbose extract" \ #define dpkg_deb_example_usage \ "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" #define du_trivial_usage \ "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..." #define du_full_usage "\n\n" \ "Summarize disk space used for each FILE and/or directory.\n" \ "Disk space is printed in units of " \ USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \ SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \ " bytes.\n" \ "\nOptions:" \ "\n -a Show file sizes too" \ "\n -H Follow symlinks on command line" \ "\n -L Follow all symlinks" \ "\n -d N Limit output to directories (and files with -a) of depth < N" \ "\n -c Show grand total" \ "\n -l Count sizes many times if hard linked" \ "\n -s Display only a total for each argument" \ "\n -x Skip directories on different filesystems" \ USE_FEATURE_HUMAN_READABLE( \ "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \ "\n -m Sizes in megabytes" \ ) \ "\n -k Sizes in kilobytes" \ USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \ #define du_example_usage \ "$ du\n" \ "16 ./CVS\n" \ "12 ./kernel-patches/CVS\n" \ "80 ./kernel-patches\n" \ "12 ./tests/CVS\n" \ "36 ./tests\n" \ "12 ./scripts/CVS\n" \ "16 ./scripts\n" \ "12 ./docs/CVS\n" \ "104 ./docs\n" \ "2417 .\n" #define dumpkmap_trivial_usage \ "> keymap" #define dumpkmap_full_usage "\n\n" \ "Print a binary keyboard translation table to standard output" #define dumpkmap_example_usage \ "$ dumpkmap > keymap\n" #define dumpleases_trivial_usage \ "[-r|-a] [-f LEASEFILE]" #define dumpleases_full_usage "\n\n" \ "Display DHCP leases granted by udhcpd\n" \ "\nOptions:" \ USE_GETOPT_LONG( \ "\n -f,--file=FILE Leases file to load" \ "\n -r,--remaining Interpret lease times as time remaining" \ "\n -a,--absolute Interpret lease times as expire time" \ ) \ SKIP_GETOPT_LONG( \ "\n -f FILE Leases file to load" \ "\n -r Interpret lease times as time remaining" \ "\n -a Interpret lease times as expire time" \ ) #define e2fsck_trivial_usage \ "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \ "[-I inode_buffer_blocks] [-P process_inode_size] " \ "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ "[-E extended-options] device" #define e2fsck_full_usage "\n\n" \ "Check ext2/ext3 file system\n" \ "\nOptions:" \ "\n -p Automatic repair (no questions)" \ "\n -n Make no changes to the filesystem" \ "\n -y Assume 'yes' to all questions" \ "\n -c Check for bad blocks and add them to the badblock list" \ "\n -f Force checking even if filesystem is marked clean" \ "\n -v Verbose" \ "\n -b superblock Use alternative superblock" \ "\n -B blocksize Force blocksize when looking for superblock" \ "\n -j journal Set location of the external journal" \ "\n -l file Add to badblocks list" \ "\n -L file Set badblocks list" \ #define echo_trivial_usage \ USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]" #define echo_full_usage "\n\n" \ "Print the specified ARGs to stdout" \ USE_FEATURE_FANCY_ECHO( "\n" \ "\nOptions:" \ "\n -n Suppress trailing newline" \ "\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \ "\n -E Disable interpretation of backslash-escaped characters" \ ) #define echo_example_usage \ "$ echo \"Erik is cool\"\n" \ "Erik is cool\n" \ USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ "Erik\n" \ "is\n" \ "cool\n" \ "$ echo \"Erik\\nis\\ncool\"\n" \ "Erik\\nis\\ncool\n") #define eject_trivial_usage \ "[-t] [-T] [DEVICE]" #define eject_full_usage "\n\n" \ "Eject specified DEVICE (or default /dev/cdrom)\n" \ "\nOptions:" \ USE_FEATURE_EJECT_SCSI( \ "\n -s SCSI device" \ ) \ "\n -t Close tray" \ "\n -T Open/close tray (toggle)" \ #define ed_trivial_usage "" #define ed_full_usage "" #define env_trivial_usage \ "[-iu] [-] [name=value]... [command]" #define env_full_usage "\n\n" \ "Print the current environment or run a program after setting\n" \ "up the specified environment\n" \ "\nOptions:" \ "\n -, -i Start with an empty environment" \ "\n -u Remove variable from the environment" \ #define ether_wake_trivial_usage \ "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" #define ether_wake_full_usage "\n\n" \ "Send a magic packet to wake up sleeping machines.\n" \ "MAC must be a station address (00:11:22:33:44:55) or\n" \ "a hostname with a known 'ethers' entry.\n" \ "\nOptions:" \ "\n -b Send wake-up packet to the broadcast address" \ "\n -i iface Interface to use (default eth0)" \ "\n -p pass Append four or six byte password PW to the packet" \ #define expand_trivial_usage \ "[-i] [-t NUM] [FILE|-]" #define expand_full_usage "\n\n" \ "Convert tabs to spaces, writing to standard output.\n" \ "\nOptions:" \ USE_FEATURE_EXPAND_LONG_OPTIONS( \ "\n -i,--initial Do not convert tabs after non blanks" \ "\n -t,--tabs=N Tabstops every N chars" \ ) \ SKIP_FEATURE_EXPAND_LONG_OPTIONS( \ "\n -i Do not convert tabs after non blanks" \ "\n -t Tabstops every N chars" \ ) #define expr_trivial_usage \ "EXPRESSION" #define expr_full_usage "\n\n" \ "Print the value of EXPRESSION to standard output.\n" \ "\n" \ "EXPRESSION may be:\n" \ " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ " ARG1 < ARG2 1 if ARG1 is less than ARG2, else 0. Similarly:\n" \ " ARG1 <= ARG2\n" \ " ARG1 = ARG2\n" \ " ARG1 != ARG2\n" \ " ARG1 >= ARG2\n" \ " ARG1 > ARG2\n" \ " ARG1 + ARG2 Sum of ARG1 and ARG2. Similarly:\n" \ " ARG1 - ARG2\n" \ " ARG1 * ARG2\n" \ " ARG1 / ARG2\n" \ " ARG1 % ARG2\n" \ " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \ " match STRING REGEXP Same as STRING : REGEXP\n" \ " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \ " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \ " length STRING Length of STRING\n" \ " quote TOKEN Interpret TOKEN as a string, even if\n" \ " it is a keyword like 'match' or an\n" \ " operator like '/'\n" \ " (EXPRESSION) Value of EXPRESSION\n" \ "\n" \ "Beware that many operators need to be escaped or quoted for shells.\n" \ "Comparisons are arithmetic if both ARGs are numbers, else\n" \ "lexicographical. Pattern matches return the string matched between\n" \ "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \ "of characters matched or 0." #define fakeidentd_trivial_usage \ "[-fiw] [-b ADDR] [STRING]" #define fakeidentd_full_usage "\n\n" \ "Provide fake ident (auth) service\n" \ "\nOptions:" \ "\n -f Run in foreground" \ "\n -i Inetd mode" \ "\n -w Inetd 'wait' mode" \ "\n -b ADDR Bind to specified address" \ "\n STRING Ident answer string (default is 'nobody')" \ #define false_trivial_usage \ "" #define false_full_usage "\n\n" \ "Return an exit code of FALSE (1)" #define false_example_usage \ "$ false\n" \ "$ echo $?\n" \ "1\n" #define fbset_trivial_usage \ "[options] [mode]" #define fbset_full_usage "\n\n" \ "Show and modify frame buffer settings" #define fbset_example_usage \ "$ fbset\n" \ "mode \"1024x768-76\"\n" \ " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ " geometry 1024 768 1024 768 16\n" \ " timings 12714 128 32 16 4 128 4\n" \ " accel false\n" \ " rgba 5/11,6/5,5/0,0/0\n" \ "endmode\n" #define fdflush_trivial_usage \ "DEVICE" #define fdflush_full_usage "\n\n" \ "Force floppy disk drive to detect disk change" #define fdformat_trivial_usage \ "[-n] DEVICE" #define fdformat_full_usage "\n\n" \ "Format floppy disk\n" \ "\nOptions:" \ "\n -n Don't verify after format" \ /* Looks like someone forgot to add this to config system */ #ifndef ENABLE_FEATURE_FDISK_BLKSIZE # define ENABLE_FEATURE_FDISK_BLKSIZE 0 # define USE_FEATURE_FDISK_BLKSIZE(a) #endif #define fdisk_trivial_usage \ "[-ul" USE_FEATURE_FDISK_BLKSIZE("s") "] " \ "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" #define fdisk_full_usage "\n\n" \ "Change partition table\n" \ "\nOptions:" \ "\n -u Start and End are in sectors (instead of cylinders)" \ "\n -l Show partition table for each DISK, then exit" \ USE_FEATURE_FDISK_BLKSIZE( \ "\n -s Show partition sizes in kb for each DISK, then exit" \ ) \ "\n -b 2048 (for certain MO disks) use 2048-byte sectors" \ "\n -C CYLINDERS Set number of cylinders/heads/sectors" \ "\n -H HEADS\n" \ "\n -S SECTORS" \ #define fetchmail_trivial_usage \ "[-w timeout] [-U user] -P password [-X] [-t] [-z] server[:port] maildir [prog]" #define fetchmail_full_usage "\n\n" \ "Fetch content of remote mailbox to local Maildir.\n" \ "\nOptions:" \ "\n -w timeout Set timeout on network operations" \ "\n -U username Authenticate with specified username/password" \ "\n -P password" \ "\n -X Use openssl connection helper for secured servers" \ "\n -t Get only headers" \ "\n -z Delete messages on server" \ "\n prog Run prog on message delivery" \ #define findfs_trivial_usage \ "LABEL=label or UUID=uuid" #define findfs_full_usage "\n\n" \ "Find a filesystem device based on a label or UUID." #define findfs_example_usage \ "$ findfs LABEL=MyDevice" #define find_trivial_usage \ "[PATH...] [EXPRESSION]" #define find_full_usage "\n\n" \ "Search for files. The default PATH is the current directory,\n" \ "default EXPRESSION is '-print'\n" \ "\nEXPRESSION may consist of:" \ "\n -follow Dereference symlinks" \ USE_FEATURE_FIND_XDEV( \ "\n -xdev Don't descend directories on other filesystems") \ USE_FEATURE_FIND_MAXDEPTH( \ "\n -maxdepth N Descend at most N levels. -maxdepth 0 applies" \ "\n tests/actions to command line arguments only") \ "\n -name PATTERN File name (w/o directory name) matches PATTERN" \ "\n -iname PATTERN Case insensitive -name" \ USE_FEATURE_FIND_PATH( \ "\n -path PATTERN Path matches PATTERN") \ USE_FEATURE_FIND_REGEX( \ "\n -regex PATTERN Path matches regex PATTERN") \ USE_FEATURE_FIND_TYPE( \ "\n -type X File type is X (X is one of: f,d,l,b,c,...)") \ USE_FEATURE_FIND_PERM( \ "\n -perm NNN Permissions match any of (+NNN), all of (-NNN)," \ "\n or exactly (NNN)") \ USE_FEATURE_FIND_MTIME( \ "\n -mtime DAYS Modified time is greater than (+N), less than (-N)," \ "\n or exactly (N) days") \ USE_FEATURE_FIND_MMIN( \ "\n -mmin MINS Modified time is greater than (+N), less than (-N)," \ "\n or exactly (N) minutes") \ USE_FEATURE_FIND_NEWER( \ "\n -newer FILE Modified time is more recent than FILE's") \ USE_FEATURE_FIND_INUM( \ "\n -inum N File has inode number N") \ USE_FEATURE_FIND_USER( \ "\n -user NAME File is owned by user NAME (numeric user ID allowed)") \ USE_FEATURE_FIND_GROUP( \ "\n -group NAME File belongs to group NAME (numeric group ID allowed)") \ USE_FEATURE_FIND_DEPTH( \ "\n -depth Process directory name after traversing it") \ USE_FEATURE_FIND_SIZE( \ "\n -size N[bck] File size is N (c:bytes,k:kbytes,b:512 bytes(def.))." \ "\n +/-N: file size is bigger/smaller than N") \ "\n -print Print (default and assumed)" \ USE_FEATURE_FIND_PRINT0( \ "\n -print0 Delimit output with null characters rather than" \ "\n newlines") \ USE_FEATURE_FIND_CONTEXT ( \ "\n -context File has specified security context") \ USE_FEATURE_FIND_EXEC( \ "\n -exec CMD ARG ; Execute CMD with all instances of {} replaced by the" \ "\n matching files") \ USE_FEATURE_FIND_PRUNE( \ "\n -prune Stop traversing current subtree") \ USE_FEATURE_FIND_DELETE( \ "\n -delete Delete files, turns on -depth option") \ USE_FEATURE_FIND_PAREN( \ "\n (EXPR) Group an expression") \ #define find_example_usage \ "$ find / -name passwd\n" \ "/etc/passwd\n" #define fold_trivial_usage \ "[-bs] [-w WIDTH] [FILE]" #define fold_full_usage "\n\n" \ "Wrap input lines in each FILE (standard input by default), writing to\n" \ "standard output\n" \ "\nOptions:" \ "\n -b Count bytes rather than columns" \ "\n -s Break at spaces" \ "\n -w Use WIDTH columns instead of 80" \ #define free_trivial_usage \ "" #define free_full_usage "\n\n" \ "Display the amount of free and used system memory" #define free_example_usage \ "$ free\n" \ " total used free shared buffers\n" \ " Mem: 257628 248724 8904 59644 93124\n" \ " Swap: 128516 8404 120112\n" \ "Total: 386144 257128 129016\n" \ #define freeramdisk_trivial_usage \ "DEVICE" #define freeramdisk_full_usage "\n\n" \ "Free all memory used by the specified ramdisk" #define freeramdisk_example_usage \ "$ freeramdisk /dev/ram2\n" #define fsck_trivial_usage \ "[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]" #define fsck_full_usage "\n\n" \ "Check and repair filesystems\n" \ "\nOptions:" \ "\n -A Walk /etc/fstab and check all filesystems" \ "\n -N Don't execute, just show what would be done" \ "\n -P With -A, check filesystems in parallel" \ "\n -R With -A, skip the root filesystem" \ "\n -T Don't show title on startup" \ "\n -V Verbose" \ "\n -C n Write status information to specified filedescriptor" \ "\n -t type List of filesystem types to check" \ #define fsck_minix_trivial_usage \ "[-larvsmf] /dev/name" #define fsck_minix_full_usage "\n\n" \ "Check MINIX filesystem\n" \ "\nOptions:" \ "\n -l List all filenames" \ "\n -r Perform interactive repairs" \ "\n -a Perform automatic repairs" \ "\n -v Verbose" \ "\n -s Output super-block information" \ "\n -m Show \"mode not cleared\" warnings" \ "\n -f Force file system check" \ #define ftpget_trivial_usage \ "[options] remote-host local-file remote-file" #define ftpget_full_usage "\n\n" \ "Retrieve a remote file via FTP\n" \ "\nOptions:" \ USE_GETOPT_LONG( \ "\n -c,--continue Continue previous transfer" \ "\n -v,--verbose Verbose" \ "\n -u,--username Username" \ "\n -p,--password Password" \ "\n -P,--port Port number" \ ) \ SKIP_GETOPT_LONG( \ "\n -c Continue previous transfer" \ "\n -v Verbose" \ "\n -u Username" \ "\n -p Password" \ "\n -P Port number" \ ) #define ftpput_trivial_usage \ "[options] remote-host remote-file local-file" #define ftpput_full_usage "\n\n" \ "Store a local file on a remote machine via FTP\n" \ "\nOptions:" \ USE_GETOPT_LONG( \ "\n -v,--verbose Verbose" \ "\n -u,--username Username" \ "\n -p,--password Password" \ "\n -P,--port Port number" \ ) \ SKIP_GETOPT_LONG( \ "\n -v Verbose" \ "\n -u Username" \ "\n -p Password" \ "\n -P Port number" \ ) #define fuser_trivial_usage \ "[options] FILE or PORT/PROTO" #define fuser_full_usage "\n\n" \ "Find processes which use FILEs or PORTs\n" \ "\nOptions:" \ "\n -m Find processes which use same fs as FILEs" \ "\n -4 Search only IPv4 space" \ "\n -6 Search only IPv6 space" \ "\n -s Silent: just exit with 0 if any processes are found" \ "\n -k Kill found processes (otherwise display PIDs)" \ "\n -SIGNAL Signal to send (default: TERM)" \ #define getenforce_trivial_usage NOUSAGE_STR #define getenforce_full_usage "" #define getopt_trivial_usage \ "[OPTIONS]..." #define getopt_full_usage "\n\n" \ "Parse command options\n" \ USE_GETOPT_LONG( \ "\n -a,--alternative Allow long options starting with single -" \ "\n -l,--longoptions=longopts Long options to be recognized" \ "\n -n,--name=progname The name under which errors are reported" \ "\n -o,--options=optstring Short options to be recognized" \ "\n -q,--quiet Disable error reporting by getopt(3)" \ "\n -Q,--quiet-output No normal output" \ "\n -s,--shell=shell Set shell quoting conventions" \ "\n -T,--test Test for getopt(1) version" \ "\n -u,--unquoted Don't quote the output" \ ) \ SKIP_GETOPT_LONG( \ "\n -a Allow long options starting with single -" \ "\n -l longopts Long options to be recognized" \ "\n -n progname The name under which errors are reported" \ "\n -o optstring Short options to be recognized" \ "\n -q Disable error reporting by getopt(3)" \ "\n -Q No normal output" \ "\n -s shell Set shell quoting conventions" \ "\n -T Test for getopt(1) version" \ "\n -u Don't quote the output" \ ) #define getopt_example_usage \ "$ cat getopt.test\n" \ "#!/bin/sh\n" \ "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ " -n 'example.busybox' -- \"$@\"`\n" \ "if [ $? != 0 ]; then exit 1; fi\n" \ "eval set -- \"$GETOPT\"\n" \ "while true; do\n" \ " case $1 in\n" \ " -a|--a-long) echo \"Option a\"; shift;;\n" \ " -b|--b-long) echo \"Option b, argument '$2'\"; shift 2;;\n" \ " -c|--c-long)\n" \ " case \"$2\" in\n" \ " \"\") echo \"Option c, no argument\"; shift 2;;\n" \ " *) echo \"Option c, argument '$2'\"; shift 2;;\n" \ " esac;;\n" \ " --) shift; break;;\n" \ " *) echo \"Internal error!\"; exit 1;;\n" \ " esac\n" \ "done\n" #define getsebool_trivial_usage \ "-a or getsebool boolean..." #define getsebool_full_usage "\n\n" \ " -a Show all SELinux booleans" #define getty_trivial_usage \ "[OPTIONS] BAUD_RATE TTY [TERMTYPE]" #define getty_full_usage "\n\n" \ "Open a tty, prompt for a login name, then invoke /bin/login\n" \ "\nOptions:" \ "\n -h Enable hardware (RTS/CTS) flow control" \ "\n -i Do not display /etc/issue before running login" \ "\n -L Local line, do not do carrier detect" \ "\n -m Get baud rate from modem's CONNECT status message" \ "\n -w Wait for a CR or LF before sending /etc/issue" \ "\n -n Do not prompt the user for a login name" \ "\n -f issue_file Display issue_file instead of /etc/issue" \ "\n -l login_app Invoke login_app instead of /bin/login" \ "\n -t timeout Terminate after timeout if no username is read" \ "\n -I initstring Init string to send before anything else" \ "\n -H login_host Log login_host into the utmp file as the hostname" \ #define grep_trivial_usage \ "[-HhrilLnqvso" \ USE_DESKTOP("w") \ "eF" \ USE_FEATURE_GREP_EGREP_ALIAS("E") \ USE_FEATURE_GREP_CONTEXT("ABC") \ "] PATTERN [FILEs...]" #define grep_full_usage "\n\n" \ "Search for PATTERN in each FILE or standard input\n" \ "\nOptions:" \ "\n -H Prefix output lines with filename where match was found" \ "\n -h Suppress the prefixing filename on output" \ "\n -r Recurse subdirectories" \ "\n -i Ignore case distinctions" \ "\n -l List names of files that match" \ "\n -L List names of files that do not match" \ "\n -n Print line number with output lines" \ "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \ "\n -v Select non-matching lines" \ "\n -s Suppress file open/read error messages" \ "\n -c Only print count of matching lines" \ "\n -o Show only the part of a line that matches PATTERN" \ "\n -m MAX Match up to MAX times per file" \ USE_DESKTOP( \ "\n -w Match whole words only") \ "\n -F PATTERN is a set of newline-separated strings" \ USE_FEATURE_GREP_EGREP_ALIAS( \ "\n -E PATTERN is an extended regular expression") \ "\n -e PTRN Pattern to match" \ "\n -f FILE Read pattern from file" \ USE_FEATURE_GREP_CONTEXT( \ "\n -A Print NUM lines of trailing context" \ "\n -B Print NUM lines of leading context" \ "\n -C Print NUM lines of output context") \ #define grep_example_usage \ "$ grep root /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "$ grep ^[rR]oo. /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" #define egrep_trivial_usage NOUSAGE_STR #define egrep_full_usage "" #define fgrep_trivial_usage NOUSAGE_STR #define fgrep_full_usage "" #define gunzip_trivial_usage \ "[OPTION]... [FILE]..." #define gunzip_full_usage "\n\n" \ "Uncompress FILEs (or standard input)\n" \ "\nOptions:" \ "\n -c Write to standard output" \ "\n -f Force" \ "\n -t Test file integrity" \ #define gunzip_example_usage \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ "$ ls -la /tmp/BusyBox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" #define gzip_trivial_usage \ "[OPTION]... [FILE]..." #define gzip_full_usage "\n\n" \ "Compress FILEs (or standard input)\n" \ "\nOptions:" \ "\n -c Write to standard output" \ "\n -d Decompress" \ "\n -f Force" \ #define gzip_example_usage \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ "$ gzip /tmp/busybox.tar\n" \ "$ ls -la /tmp/busybox*\n" \ "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" #define halt_trivial_usage \ "[-d delay] [-n] [-f]" #define halt_full_usage "\n\n" \ "Halt the system\n" \ "\nOptions:" \ "\n -d Delay interval for halting" \ "\n -n No call to sync()" \ "\n -f Force halt (don't go through init)" \ USE_FEATURE_WTMP( \ "\n -w Only write a wtmp record" \ ) #define hdparm_trivial_usage \ "[options] [device] .." #define hdparm_full_usage "\n\n" \ "Options:" \ "\n -a Get/set fs readahead" \ "\n -A Set drive read-lookahead flag (0/1)" \ "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \ "\n -B Set Advanced Power Management setting (1-255)" \ "\n -c Get/set IDE 32-bit IO setting" \ "\n -C Check IDE power mode status" \ USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \ "\n -d Get/set using_dma flag") \ "\n -D Enable/disable drive defect-mgmt" \ "\n -f Flush buffer cache for device on exit" \ "\n -g Display drive geometry" \ "\n -h Display terse usage information" \ USE_FEATURE_HDPARM_GET_IDENTITY( \ "\n -i Display drive identification") \ USE_FEATURE_HDPARM_GET_IDENTITY( \ "\n -I Detailed/current information directly from drive") \ "\n -k Get/set keep_settings_over_reset flag (0/1)" \ "\n -K Set drive keep_features_over_reset flag (0/1)" \ "\n -L Set drive doorlock (0/1) (removable harddisks only)" \ "\n -m Get/set multiple sector count" \ "\n -n Get/set ignore-write-errors flag (0/1)" \ "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \ "\n -P Set drive prefetch count" \ /* "\n -q Change next setting quietly" - not supported ib bbox */ \ "\n -Q Get/set DMA tagged-queuing depth (if supported)" \ "\n -r Get/set readonly flag (DANGEROUS to set)" \ USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ "\n -R Register an IDE interface (DANGEROUS)") \ "\n -S Set standby (spindown) timeout" \ "\n -t Perform device read timings" \ "\n -T Perform cache read timings" \ "\n -u Get/set unmaskirq flag (0/1)" \ USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ "\n -U Un-register an IDE interface (DANGEROUS)") \ "\n -v Defaults; same as -mcudkrag for IDE drives" \ "\n -V Display program version and exit immediately" \ USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ "\n -w Perform device reset (DANGEROUS)") \ "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \ USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \ "\n -X Set IDE xfer mode (DANGEROUS)" \ "\n -y Put IDE drive in standby mode" \ "\n -Y Put IDE drive to sleep" \ "\n -Z Disable Seagate auto-powersaving mode" \ "\n -z Re-read partition table" \ #define head_trivial_usage \ "[OPTION]... [FILE]..." #define head_full_usage "\n\n" \ "Print first 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ "file name. With no FILE, or when FILE is -, read standard input.\n" \ "\nOptions:" \ "\n -n NUM Print first NUM lines instead of first 10" \ USE_FEATURE_FANCY_HEAD( \ "\n -c NUM Output the first NUM bytes" \ "\n -q Never output headers giving file names" \ "\n -v Always output headers giving file names") \ #define head_example_usage \ "$ head -n 2 /etc/passwd\n" \ "root:x:0:0:root:/root:/bin/bash\n" \ "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" #define hexdump_trivial_usage \ "[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..." #define hexdump_full_usage "\n\n" \ "Display file(s) or standard input in a user specified format\n" \ "\nOptions:" \ "\n -b One-byte octal display" \ "\n -c One-byte character display" \ "\n -C Canonical hex+ASCII, 16 bytes per line" \ "\n -d Two-byte decimal display" \ "\n -e FORMAT STRING" \ "\n -f FORMAT FILE" \ "\n -n LENGTH Interpret only LENGTH bytes of input" \ "\n -o Two-byte octal display" \ "\n -s OFFSET Skip OFFSET bytes" \ "\n -v Display all input data" \ "\n -x Two-byte hexadecimal display" \ USE_FEATURE_HEXDUMP_REVERSE( \ "\n -R Reverse of 'hexdump -Cv'") \ #define hd_trivial_usage \ "FILE..." #define hd_full_usage "\n\n" \ "hd is an alias for hexdump -C" #define hostid_trivial_usage \ "" #define hostid_full_usage "\n\n" \ "Print out a unique 32-bit identifier for the machine" #define hostname_trivial_usage \ "[OPTION] [hostname | -F FILE]" #define hostname_full_usage "\n\n" \ "Get or set hostname or DNS domain name\n" \ "\nOptions:" \ "\n -s Short" \ "\n -i Addresses for the hostname" \ "\n -d DNS domain name" \ "\n -f Fully qualified domain name" \ "\n -F FILE Use the contents of FILE to specify the hostname" \ #define hostname_example_usage \ "$ hostname\n" \ "sage\n" #define httpd_trivial_usage \ "[-c conffile]" \ " [-p [ip:]port]" \ " [-i] [-f] [-v[v]]" \ USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \ USE_FEATURE_HTTPD_BASIC_AUTH(" [-r realm]") \ USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \ " [-h home]" \ " [-d/-e string]" #define httpd_full_usage "\n\n" \ "Listen for incoming HTTP requests\n" \ "\nOptions:" \ "\n -c FILE Configuration file (default httpd.conf)" \ "\n -p [IP:]PORT Bind to ip:port (default *:80)" \ "\n -i Inetd mode" \ "\n -f Do not daemonize" \ "\n -v[v] Verbose" \ USE_FEATURE_HTTPD_SETUID( \ "\n -u USER[:GRP] Set uid/gid after binding to port") \ USE_FEATURE_HTTPD_BASIC_AUTH( \ "\n -r REALM Authentication Realm for Basic Authentication") \ USE_FEATURE_HTTPD_AUTH_MD5( \ "\n -m PASS Crypt PASS with md5 algorithm") \ "\n -h HOME Home directory (default .)" \ "\n -e STRING HTML encode STRING" \ "\n -d STRING URL decode STRING" \ #define hwclock_trivial_usage \ USE_GETOPT_LONG( \ "[-r|--show] [-s|--hctosys] [-w|--systohc]" \ " [-l|--localtime] [-u|--utc]" \ " [-f FILE]" \ ) \ SKIP_GETOPT_LONG( \ "[-r] [-s] [-w] [-l] [-u] [-f FILE]" \ ) #define hwclock_full_usage "\n\n" \ "Query and set hardware clock (RTC)\n" \ "\nOptions:" \ "\n -r Show hardware clock time" \ "\n -s Set system time from hardware clock" \ "\n -w Set hardware clock to system time" \ "\n -u Hardware clock is in UTC" \ "\n -l Hardware clock is in local time" \ "\n -f FILE Use specified device (e.g. /dev/rtc2)" \ #define id_trivial_usage \ "[OPTIONS]... [USER]" #define id_full_usage "\n\n" \ "Print information about USER or the current user\n" \ "\nOptions:" \ USE_SELINUX( \ "\n -Z Print the security context" \ ) \ "\n -g Print group ID" \ "\n -u Print user ID" \ "\n -n Print name instead of a number" \ "\n -r Print real user ID instead of effective ID" \ #define id_example_usage \ "$ id\n" \ "uid=1000(andersen) gid=1000(andersen)\n" #define ifconfig_trivial_usage \ USE_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]" #define ifconfig_full_usage "\n\n" \ "Configure a network interface\n" \ "\nOptions:" \ "\n" \ USE_FEATURE_IPV6( \ " [add ADDRESS[/PREFIXLEN]]\n") \ USE_FEATURE_IPV6( \ " [del ADDRESS[/PREFIXLEN]]\n") \ " [[-]broadcast [ADDRESS]] [[-]pointopoint [ADDRESS]]\n" \ " [netmask ADDRESS] [dstaddr ADDRESS]\n" \ USE_FEATURE_IFCONFIG_SLIP( \ " [outfill NN] [keepalive NN]\n") \ " " USE_FEATURE_IFCONFIG_HW("[hw ether" USE_FEATURE_HWIB("|infiniband")" ADDRESS] ") "[metric NN] [mtu NN]\n" \ " [[-]trailers] [[-]arp] [[-]allmulti]\n" \ " [multicast] [[-]promisc] [txqueuelen NN] [[-]dynamic]\n" \ USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \ " [mem_start NN] [io_addr NN] [irq NN]\n") \ " [up|down] ..." #define ifenslave_trivial_usage \ "[-cdf] master-iface " #define ifenslave_full_usage "\n\n" \ "Configure network interfaces for parallel routing\n" \ "\nOptions:" \ "\n -c, --change-active Change active slave" \ "\n -d, --detach Remove slave interface from bonding device" \ "\n -f, --force Force, even if interface is not Ethernet" \ /* "\n -r, --receive-slave Create a receive-only slave" */ #define ifenslave_example_usage \ "To create a bond device, simply follow these three steps :\n" \ "- ensure that the required drivers are properly loaded :\n" \ " # modprobe bonding ; modprobe <3c59x|eepro100|pcnet32|tulip|...>\n" \ "- assign an IP address to the bond device :\n" \ " # ifconfig bond0 netmask broadcast \n" \ "- attach all the interfaces you need to the bond device :\n" \ " # ifenslave bond0 eth0 eth1 eth2\n" \ " If bond0 didn't have a MAC address, it will take eth0's. Then, all\n" \ " interfaces attached AFTER this assignment will get the same MAC addr.\n\n" \ " To detach a dead interface without setting the bond device down :\n" \ " # ifenslave -d bond0 eth1\n\n" \ " To set the bond device down and automatically release all the slaves :\n" \ " # ifconfig bond0 down\n\n" \ " To change active slave :\n" \ " # ifenslave -c bond0 eth0\n" \ #define ifup_trivial_usage \ "[-ain"USE_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..." #define ifup_full_usage "\n\n" \ "Options:" \ "\n -a De/configure all interfaces automatically" \ "\n -i FILE Use FILE for interface definitions" \ "\n -n Print out what would happen, but don't do it" \ USE_FEATURE_IFUPDOWN_MAPPING( \ "\n (note: doesn't disable mappings)" \ "\n -m Don't run any mappings" \ ) \ "\n -v Print out what would happen before doing it" \ "\n -f Force de/configuration" \ #define ifdown_trivial_usage \ "[-ain"USE_FEATURE_IFUPDOWN_MAPPING("m")"vf] ifaces..." #define ifdown_full_usage "\n\n" \ "Options:" \ "\n -a De/configure all interfaces automatically" \ "\n -i FILE Use FILE for interface definitions" \ "\n -n Print out what would happen, but don't do it" \ USE_FEATURE_IFUPDOWN_MAPPING( \ "\n (note: doesn't disable mappings)" \ "\n -m Don't run any mappings" \ ) \ "\n -v Print out what would happen before doing it" \ "\n -f Force de/configuration" \ #define inetd_trivial_usage \ "[-fe] [-q N] [-R N] [CONFFILE]" #define inetd_full_usage "\n\n" \ "Listen for network connections and launch programs\n" \ "\nOptions:" \ "\n -f Run in foreground" \ "\n -e Log to stderr" \ "\n -q N Socket listen queue (default: 128)" \ "\n -R N Pause services after N connects/min" \ "\n (default: 0 - disabled)" \ #define init_trivial_usage \ "" #define init_full_usage "\n\n" \ "Init is the parent of all processes" #define init_notes_usage \ "This version of init is designed to be run only by the kernel.\n" \ "\n" \ "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ "the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \ "runlevels, use sysvinit.\n" \ "\n" \ "BusyBox init works just fine without an inittab. If no inittab is found,\n" \ "it has the following default behavior:\n" \ "\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " ::askfirst:/bin/sh\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/sbin/swapoff -a\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::restart:/sbin/init\n" \ "\n" \ "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \ "\n" \ " tty2::askfirst:/bin/sh\n" \ " tty3::askfirst:/bin/sh\n" \ " tty4::askfirst:/bin/sh\n" \ "\n" \ "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ "\n" \ " :::\n" \ "\n" \ " :\n" \ "\n" \ " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ " The id field is used by BusyBox init to specify the controlling tty for\n" \ " the specified process to run on. The contents of this field are\n" \ " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \ " be unique, although if it isn't you may have strange results. If this\n" \ " field is left blank, the controlling tty is set to the console. Also\n" \ " note that if BusyBox detects that a serial console is in use, then only\n" \ " entries whose controlling tty is either the serial console or /dev/null\n" \ " will be run. BusyBox init does nothing with utmp. We don't need no\n" \ " stinkin' utmp.\n" \ "\n" \ " :\n" \ "\n" \ " The runlevels field is completely ignored.\n" \ "\n" \ " :\n" \ "\n" \ " Valid actions include: sysinit, respawn, askfirst, wait,\n" \ " once, restart, ctrlaltdel, and shutdown.\n" \ "\n" \ " The available actions can be classified into two groups: actions\n" \ " that are run only once, and actions that are re-run when the specified\n" \ " process exits.\n" \ "\n" \ " Run only-once actions:\n" \ "\n" \ " 'sysinit' is the first item run on boot. init waits until all\n" \ " sysinit actions are completed before continuing. Following the\n" \ " completion of all sysinit actions, all 'wait' actions are run.\n" \ " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ " the specified task completes. 'once' actions are asynchronous,\n" \ " therefore, init does not wait for them to complete. 'restart' is\n" \ " the action taken to restart the init process. By default this should\n" \ " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ " actions are run when the system detects that someone on the system\n" \ " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ " wants to run 'reboot' at this point to cause the system to reboot.\n" \ " Finally the 'shutdown' action specifies the actions to taken when\n" \ " init is told to reboot. Unmounting filesystems and disabling swap\n" \ " is a very good here.\n" \ "\n" \ " Run repeatedly actions:\n" \ "\n" \ " 'respawn' actions are run after the 'once' actions. When a process\n" \ " started with a 'respawn' action exits, init automatically restarts\n" \ " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ " respawning out of control. The 'askfirst' actions acts just like\n" \ " respawn, except that before running the specified process it\n" \ " displays the line \"Please press Enter to activate this console.\"\n" \ " and then waits for the user to press enter before starting the\n" \ " specified process.\n" \ "\n" \ " Unrecognized actions (like initdefault) will cause init to emit an\n" \ " error message, and then go along with its business. All actions are\n" \ " run in the order they appear in /etc/inittab.\n" \ "\n" \ " :\n" \ "\n" \ " Specifies the process to be executed and its command line.\n" \ "\n" \ "Example /etc/inittab file:\n" \ "\n" \ " # This is run first except when booting in single-user mode\n" \ " #\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " \n" \ " # /bin/sh invocations on selected ttys\n" \ " #\n" \ " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \ " ::askfirst:-/bin/sh\n" \ " # Start an \"askfirst\" shell on /dev/tty2-4\n" \ " tty2::askfirst:-/bin/sh\n" \ " tty3::askfirst:-/bin/sh\n" \ " tty4::askfirst:-/bin/sh\n" \ " \n" \ " # /sbin/getty invocations for selected ttys\n" \ " #\n" \ " tty4::respawn:/sbin/getty 38400 tty4\n" \ " tty5::respawn:/sbin/getty 38400 tty5\n" \ " \n" \ " \n" \ " # Example of how to put a getty on a serial line (for a terminal)\n" \ " #\n" \ " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ " #\n" \ " # Example how to put a getty on a modem line\n" \ " #::respawn:/sbin/getty 57600 ttyS2\n" \ " \n" \ " # Stuff to do when restarting the init process\n" \ " ::restart:/sbin/init\n" \ " \n" \ " # Stuff to do before rebooting\n" \ " ::ctrlaltdel:/sbin/reboot\n" \ " ::shutdown:/bin/umount -a -r\n" \ " ::shutdown:/sbin/swapoff -a\n" #define inotifyd_trivial_usage \ "/user/space/agent dir/or/file/being/watched[:mask] ..." #define inotifyd_full_usage "\n\n" \ "Spawn userspace agent on filesystem changes." \ "\nWhen a filesystem event matching the mask occurs" \ "\non specified file/directory an userspace agent is spawned" \ "\nwith the parameters:" \ "\n1. actual event(s)" \ "\n2. file/directory name" \ "\n3. name of subfile (if any), in case of watching a directory" \ "\n" \ "\n a File is accessed" \ "\n c File is modified" \ "\n e Metadata changed" \ "\n w Writtable file is closed" \ "\n 0 Unwrittable file is closed" \ "\n r File is opened" \ "\n m File is moved from X" \ "\n y File is moved to Y" \ "\n n Subfile is created" \ "\n d Subfile is deleted" \ "\n D Self is deleted" \ "\n M Self is moved" \ #define insmod_trivial_usage \ USE_FEATURE_2_4_MODULES("[OPTION]... ") "MODULE [symbol=value]..." #define insmod_full_usage "\n\n" \ "Load the specified kernel modules into the kernel" \ USE_FEATURE_2_4_MODULES( "\n" \ "\nOptions:" \ "\n -f Force module to load into the wrong kernel version" \ "\n -k Make module autoclean-able" \ "\n -v Verbose" \ "\n -q Quiet" \ "\n -L Lock to prevent simultaneous loads of a module" \ USE_FEATURE_INSMOD_LOAD_MAP( \ "\n -m Output load map to stdout" \ ) \ "\n -o NAME Set internal module name to NAME" \ "\n -x Do not export externs" \ ) #define install_trivial_usage \ "[-cgmops] [sources] dest|directory" #define install_full_usage "\n\n" \ "Copy files and set attributes\n" \ "\nOptions:" \ "\n -c Copy the file, default" \ "\n -d Create directories" \ "\n -g Set group ownership" \ "\n -m Set permissions" \ "\n -o Set ownership" \ "\n -p Preserve date" \ "\n -s Strip symbol tables" \ USE_SELINUX( \ "\n -Z Set security context of copy" \ ) /* would need to make the " | " optional depending on more than one selected: */ #define ip_trivial_usage \ "[OPTIONS] {" \ USE_FEATURE_IP_ADDRESS("address | ") \ USE_FEATURE_IP_ROUTE("route | ") \ USE_FEATURE_IP_LINK("link | ") \ USE_FEATURE_IP_TUNNEL("tunnel | ") \ USE_FEATURE_IP_RULE("rule") \ "} {COMMAND}" #define ip_full_usage "\n\n" \ "ip [OPTIONS] OBJECT {COMMAND}\n" \ "where OBJECT := {" \ USE_FEATURE_IP_ADDRESS("address | ") \ USE_FEATURE_IP_ROUTE("route | ") \ USE_FEATURE_IP_LINK("link | ") \ USE_FEATURE_IP_TUNNEL("tunnel | ") \ USE_FEATURE_IP_RULE("rule") \ "}\n" \ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \ #define ipaddr_trivial_usage \ "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ " [dev STRING] [to PREFIX] }" #define ipaddr_full_usage "\n\n" \ "ipaddr {add|delete} IFADDR dev STRING\n" \ "ipaddr {show|flush} [dev STRING] [scope SCOPE-ID]\n" \ " [to PREFIX] [label PATTERN]\n" \ " IFADDR := PREFIX | ADDR peer PREFIX\n" \ " [broadcast ADDR] [anycast ADDR]\n" \ " [label STRING] [scope SCOPE-ID]\n" \ " SCOPE-ID := [host | link | global | NUMBER]" \ #define ipcalc_trivial_usage \ "[OPTION]... ADDRESS[[/]NETMASK] [NETMASK]" #define ipcalc_full_usage "\n\n" \ "Calculate IP network settings from a IP address\n" \ "\nOptions:" \ USE_FEATURE_IPCALC_LONG_OPTIONS( \ "\n -b,--broadcast Display calculated broadcast address" \ "\n -n,--network Display calculated network address" \ "\n -m,--netmask Display default netmask for IP" \ USE_FEATURE_IPCALC_FANCY( \ "\n -p,--prefix Display the prefix for IP/NETMASK" \ "\n -h,--hostname Display first resolved host name" \ "\n -s,--silent Don't ever display error messages" \ ) \ ) \ SKIP_FEATURE_IPCALC_LONG_OPTIONS( \ "\n -b Display calculated broadcast address" \ "\n -n Display calculated network address" \ "\n -m Display default netmask for IP" \ USE_FEATURE_IPCALC_FANCY( \ "\n -p Display the prefix for IP/NETMASK" \ "\n -h Display first resolved host name" \ "\n -s Don't ever display error messages" \ ) \ ) #define ipcrm_trivial_usage \ "[-MQS key] [-mqs id]" #define ipcrm_full_usage "\n\n" \ "Upper-case options MQS remove an object by shmkey value.\n" \ "Lower-case options remove an object by shmid value.\n" \ "\nOptions:" \ "\n -mM Remove memory segment after last detach" \ "\n -qQ Remove message queue" \ "\n -sS Remove semaphore" \ #define ipcs_trivial_usage \ "[[-smq] -i shmid] | [[-asmq] [-tcplu]]" #define ipcs_full_usage "\n\n" \ " -i Show specific resource" \ "\nResource specification:" \ "\n -m Shared memory segments" \ "\n -q Message queues" \ "\n -s Semaphore arrays" \ "\n -a All (default)" \ "\nOutput format:" \ "\n -t Time" \ "\n -c Creator" \ "\n -p Pid" \ "\n -l Limits" \ "\n -u Summary" \ #define iplink_trivial_usage \ "{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }" #define iplink_full_usage "\n\n" \ "iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \ " dynamic { on | off } |\n" \ " mtu MTU }\n" \ "iplink show [DEVICE]" \ #define iproute_trivial_usage \ "{ list | flush | { add | del | change | append |\n" \ " replace | monitor } ROUTE }" #define iproute_full_usage "\n\n" \ "iproute { list | flush } SELECTOR\n" \ "iproute get ADDRESS [from ADDRESS iif STRING]\n" \ " [oif STRING] [tos TOS]\n" \ "iproute { add | del | change | append | replace | monitor } ROUTE\n" \ " SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \ " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]" \ #define iprule_trivial_usage \ "{[list | add | del] RULE}" #define iprule_full_usage "\n\n" \ "iprule [list | add | del] SELECTOR ACTION\n" \ " SELECTOR := [from PREFIX] [to PREFIX] [tos TOS] [fwmark FWMARK]\n" \ " [dev STRING] [pref NUMBER]\n" \ " ACTION := [table TABLE_ID] [nat ADDRESS]\n" \ " [prohibit | reject | unreachable]\n" \ " [realms [SRCREALM/]DSTREALM]\n" \ " TABLE_ID := [local | main | default | NUMBER]" \ #define iptunnel_trivial_usage \ "{ add | change | del | show } [NAME]\n" \ " [mode { ipip | gre | sit }]\n" \ " [remote ADDR] [local ADDR] [ttl TTL]" #define iptunnel_full_usage "\n\n" \ "iptunnel { add | change | del | show } [NAME]\n" \ " [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \ " [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \ " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \ #define kbd_mode_trivial_usage \ "[-a|k|s|u]" #define kbd_mode_full_usage "\n\n" \ "Report or set the keyboard mode\n" \ "\nOptions set mode:" \ "\n -a Default (ASCII)" \ "\n -k Medium-raw (keyboard)" \ "\n -s Raw (scancode)" \ "\n -u Unicode (utf-8)" \ #define kill_trivial_usage \ "[-l] [-signal] process-id..." #define kill_full_usage "\n\n" \ "Send a signal (default is TERM) to the specified process(es)\n" \ "\nOptions:" \ "\n -l List all signal names and numbers" \ #define kill_example_usage \ "$ ps | grep apache\n" \ "252 root root S [apache]\n" \ "263 www-data www-data S [apache]\n" \ "264 www-data www-data S [apache]\n" \ "265 www-data www-data S [apache]\n" \ "266 www-data www-data S [apache]\n" \ "267 www-data www-data S [apache]\n" \ "$ kill 252\n" #define killall_trivial_usage \ "[-l] [-q] [-signal] process-name..." #define killall_full_usage "\n\n" \ "Send a signal (default is TERM) to the specified process(es)\n" \ "\nOptions:" \ "\n -l List all signal names and numbers" \ "\n -q Do not complain if no processes were killed" \ #define killall_example_usage \ "$ killall apache\n" #define killall5_trivial_usage \ "[-l] [-signal]" #define killall5_full_usage "\n\n" \ "Send a signal (default is TERM) to all processes outside current session\n" \ "\nOptions:" \ "\n -l List all signal names and numbers" \ #define klogd_trivial_usage \ "[-c n] [-n]" #define klogd_full_usage "\n\n" \ "Kernel logger\n" \ "\nOptions:" \ "\n -c n Set the default log level of console messages to n" \ "\n -n Run in foreground" \ #define length_trivial_usage \ "STRING" #define length_full_usage "\n\n" \ "Print STRING's length" #define length_example_usage \ "$ length Hello\n" \ "5\n" #define less_trivial_usage \ "[-EMNmh~?] [FILE...]" #define less_full_usage "\n\n" \ "View a file or list of files. The position within files can be\n" \ "changed, and files can be manipulated in various ways.\n" \ "\nOptions:" \ "\n -E Quit once the end of a file is reached" \ "\n -M,-m Display a status line containing the line numbers" \ "\n and percentage through the file" \ "\n -N Prefix line numbers to each line" \ "\n -~ Suppress ~s displayed past the end of the file" \ #define linux32_trivial_usage NOUSAGE_STR #define linux32_full_usage "" #define linux64_trivial_usage NOUSAGE_STR #define linux64_full_usage "" #define linuxrc_trivial_usage NOUSAGE_STR #define linuxrc_full_usage "" #define setarch_trivial_usage \ "personality program [args...]" #define setarch_full_usage "\n\n" \ "Personality may be:\n" \ " linux32 Set 32bit uname emulation\n" \ " linux64 Set 64bit uname emulation" \ #define ln_trivial_usage \ "[OPTION] TARGET... LINK_NAME|DIRECTORY" #define ln_full_usage "\n\n" \ "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \ "Use '--' to indicate that all following arguments are non-options.\n" \ "\nOptions:" \ "\n -s Make symlinks instead of hardlinks" \ "\n -f Remove existing destination files" \ "\n -n Don't dereference symlinks - treat like normal file" \ "\n -b Make a backup of the target (if exists) before link operation" \ "\n -S suf Use suffix instead of ~ when making backup files" \ #define ln_example_usage \ "$ ln -s BusyBox /tmp/ls\n" \ "$ ls -l /tmp/ls\n" \ "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" #define load_policy_trivial_usage NOUSAGE_STR #define load_policy_full_usage "" #define loadfont_trivial_usage \ "< font" #define loadfont_full_usage "\n\n" \ "Load a console font from standard input" #define loadfont_example_usage \ "$ loadfont < /etc/i18n/fontname\n" #define loadkmap_trivial_usage \ "< keymap" #define loadkmap_full_usage "\n\n" \ "Load a binary keyboard translation table from standard input" #define loadkmap_example_usage \ "$ loadkmap < /etc/i18n/lang-keymap\n" #define logger_trivial_usage \ "[OPTION]... [MESSAGE]" #define logger_full_usage "\n\n" \ "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n" \ "\nOptions:" \ "\n -s Log to stderr as well as the system log" \ "\n -t TAG Log using the specified tag (defaults to user name)" \ "\n -p PRIO Priority (numeric or facility.level pair)" \ #define logger_example_usage \ "$ logger \"hello\"\n" #define login_trivial_usage \ "[-p] [-h HOST] [[-f] USER]" #define login_full_usage "\n\n" \ "Begin a new session on the system\n" \ "\nOptions:" \ "\n -f Do not authenticate (user already authenticated)" \ "\n -h Name of the remote host" \ "\n -p Preserve environment" \ #define logname_trivial_usage \ "" #define logname_full_usage "\n\n" \ "Print the name of the current user" #define logname_example_usage \ "$ logname\n" \ "root\n" #define logread_trivial_usage \ "[OPTION]..." #define logread_full_usage "\n\n" \ "Show messages in syslogd's circular buffer\n" \ "\nOptions:" \ "\n -f Output data as log grows" \ #define losetup_trivial_usage \ "[-o OFS] LOOPDEV FILE - associate loop devices\n" \ " losetup -d LOOPDEV - disassociate\n" \ " losetup [-f] - show" #define losetup_full_usage "\n\n" \ "Options:" \ "\n -o OFS Start OFS bytes into FILE" \ "\n -f Show first free loop device" \ #define losetup_notes_usage \ "No arguments will display all current associations.\n" \ "One argument (losetup /dev/loop1) will display the current association\n" \ "(if any), or disassociate it (with -d). The display shows the offset\n" \ "and filename of the file the loop device is currently bound to.\n\n" \ "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ "with an optional offset (-o 12345). Encryption is not yet supported.\n" \ "losetup -f will show the first loop free loop device\n\n" #define lpd_trivial_usage \ "SPOOLDIR [HELPER [ARGS...]]" #define lpd_full_usage "\n\n" \ "Example:" \ "\n tcpsvd -E 0 515 softlimit -m 999999 lpd /var/spool ./print" #define lpq_trivial_usage \ "[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]" #define lpq_full_usage "\n\n" \ "Options:" \ "\n -P lp service to connect to (else uses $PRINTER)" \ "\n -d Delete jobs" \ "\n -f Force any waiting job to be printed" \ "\n -s Short display" \ #define lpr_trivial_usage \ "-P queue[@host[:port]] -U USERNAME -J TITLE -Vmh [FILE...]" /* -C CLASS exists too, not shown. * CLASS is supposed to be printed on banner page, if one is requested */ #define lpr_full_usage "\n\n" \ "Options:" \ "\n -P lp service to connect to (else uses $PRINTER)"\ "\n -m Send mail on completion" \ "\n -h Print banner page too" \ "\n -V Verbose" \ #define ls_trivial_usage \ "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \ USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \ USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \ USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \ USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \ USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \ USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \ USE_SELINUX("K") "] [filenames...]" #define ls_full_usage "\n\n" \ "List directory contents\n" \ "\nOptions:" \ "\n -1 List files in a single column" \ "\n -A Do not list implied . and .." \ "\n -a Do not hide entries starting with ." \ "\n -C List entries by columns" \ USE_FEATURE_LS_TIMESTAMPS( \ "\n -c With -l: show ctime") \ USE_FEATURE_LS_COLOR( \ "\n --color[={always,never,auto}] Control coloring") \ "\n -d List directory entries instead of contents" \ USE_FEATURE_LS_TIMESTAMPS( \ "\n -e List both full date and full time") \ USE_FEATURE_LS_FILETYPES( \ "\n -F Append indicator (one of */=@|) to entries") \ "\n -i List the i-node for each file" \ "\n -l Use a long listing format" \ "\n -n List numeric UIDs and GIDs instead of names" \ USE_FEATURE_LS_FILETYPES( \ "\n -p Append indicator (one of /=@|) to entries") \ USE_FEATURE_LS_FOLLOWLINKS( \ "\n -L List entries pointed to by symlinks") \ USE_FEATURE_LS_RECURSIVE( \ "\n -R List subdirectories recursively") \ USE_FEATURE_LS_SORTFILES( \ "\n -r Sort the listing in reverse order") \ USE_FEATURE_LS_SORTFILES( \ "\n -S Sort the listing by file size") \ "\n -s List the size of each file, in blocks" \ USE_FEATURE_AUTOWIDTH( \ "\n -T NUM Assume Tabstop every NUM columns") \ USE_FEATURE_LS_TIMESTAMPS( \ "\n -t With -l: show modification time") \ USE_FEATURE_LS_TIMESTAMPS( \ "\n -u With -l: show access time") \ USE_FEATURE_LS_SORTFILES( \ "\n -v Sort the listing by version") \ USE_FEATURE_AUTOWIDTH( \ "\n -w NUM Assume the terminal is NUM columns wide") \ "\n -x List entries by lines instead of by columns" \ USE_FEATURE_LS_SORTFILES( \ "\n -X Sort the listing by extension") \ USE_FEATURE_HUMAN_READABLE( \ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \ USE_SELINUX( \ "\n -k Print security context") \ USE_SELINUX( \ "\n -K Print security context in long format") \ USE_SELINUX( \ "\n -Z Print security context and permission") \ #define lsattr_trivial_usage \ "[-Radlv] [files...]" #define lsattr_full_usage "\n\n" \ "List file attributes on an ext2 fs\n" \ "\nOptions:" \ "\n -R Recursively list subdirectories" \ "\n -a Do not hide entries starting with ." \ "\n -d List directory entries instead of contents" \ "\n -l Print long flag names" \ "\n -v List the file's version/generation number" \ #define lsmod_trivial_usage \ "" #define lsmod_full_usage "\n\n" \ "List the currently loaded kernel modules" #if ENABLE_FEATURE_MAKEDEVS_LEAF #define makedevs_trivial_usage \ "NAME TYPE MAJOR MINOR FIRST LAST [s]" #define makedevs_full_usage "\n\n" \ "Create a range of block or character special files\n\n" \ "TYPEs include:\n" \ " b Make a block device\n" \ " c or u Make a character device\n" \ " p Make a named pipe. MAJOR and MINOR are ignored\n" \ "\n" \ "FIRST specifies the number appended to NAME to create the first device.\n" \ "LAST specifies the number of the last item that should be created\n" \ "If 's' is the last argument, the base device is created as well.\n\n" \ "For example:\n" \ " makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \ " makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" #define makedevs_example_usage \ "# makedevs /dev/ttyS c 4 66 2 63\n" \ "[creates ttyS2-ttyS63]\n" \ "# makedevs /dev/hda b 3 0 0 8 s\n" \ "[creates hda,hda1-hda8]\n" #endif #if ENABLE_FEATURE_MAKEDEVS_TABLE #define makedevs_trivial_usage \ "[-d device_table] rootdir" #define makedevs_full_usage "\n\n" \ "Create a range of special files as specified in a device table.\n" \ "Device table entries take the form of:\n" \ " \n" \ "Where name is the file name, type can be one of:\n" \ " f A regular file\n" \ " d Directory\n" \ " c Character special device file\n" \ " b Block special device file\n" \ " p Fifo (named pipe)\n" \ "uid is the user id for the target file, gid is the group id for the\n" \ "target file. The rest of the entries (major, minor, etc) apply to\n" \ "to device special files. A '-' may be used for blank entries." #define makedevs_example_usage \ "For example:\n" \ " \n" \ "/dev d 755 0 0 - - - - -\n" \ "/dev/console c 666 0 0 5 1 - - -\n" \ "/dev/null c 666 0 0 1 3 0 0 -\n" \ "/dev/zero c 666 0 0 1 5 0 0 -\n" \ "/dev/hda b 640 0 0 3 0 0 0 -\n" \ "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ "Will Produce:\n" \ "/dev\n" \ "/dev/console\n" \ "/dev/null\n" \ "/dev/zero\n" \ "/dev/hda\n" \ "/dev/hda[0-15]\n" #endif #define man_trivial_usage \ "[OPTION]... [MANPAGE]..." #define man_full_usage "\n\n" \ "Format and display manual page\n" \ "\nOptions:" \ "\n -a Display all pages" \ "\n -w Show page locations" \ #define matchpathcon_trivial_usage \ "[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]" #define matchpathcon_full_usage "\n\n" \ " -n Do not display path" \ "\n -N Do not use translations" \ "\n -f Use alternate file_context file" \ "\n -p Use prefix to speed translations" \ "\n -V Verify file context on disk matches defaults" \ #define md5sum_trivial_usage \ "[OPTION] [FILEs...]" \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") #define md5sum_full_usage "\n\n" \ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\nOptions:" \ "\n -c Check MD5 sums against given list" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted MD5 checksum lines") \ #define md5sum_example_usage \ "$ md5sum < busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003\n" \ "$ md5sum busybox\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "$ md5sum -c -\n" \ "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ "busybox: OK\n" \ "^D\n" #define mdev_trivial_usage \ "[-s]" #define mdev_full_usage "\n\n" \ " -s Scan /sys and populate /dev during system boot\n" \ "\n" \ "Called with no options (via hotplug) it uses environment variables\n" \ "to determine which device to add/remove." #define mdev_notes_usage "" \ USE_FEATURE_MDEV_CONFIG( \ "The mdev config file contains lines that look like:\n" \ " hd[a-z][0-9]* 0:3 660\n\n" \ "That's device name (with regex match), uid:gid, and permissions.\n\n" \ USE_FEATURE_MDEV_EXEC( \ "Optionally, that can be followed (on the same line) by a special character\n" \ "and a command line to run after creating/before deleting the corresponding\n" \ "device(s). The environment variable $MDEV indicates the active device node\n" \ "(which is useful if it's a regex match). For example:\n\n" \ " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \ "The special characters are @ (run after creating), $ (run before deleting),\n" \ "and * (run both after creating and before deleting). The commands run in\n" \ "the /dev directory, and use system() which calls /bin/sh.\n\n" \ ) \ "Config file parsing stops on the first matching line. If no config\n" \ "entry is matched, devices are created with default 0:0 660. (Make\n" \ "the last line match .* to override this.)\n\n" \ ) #define mesg_trivial_usage \ "[y|n]" #define mesg_full_usage "\n\n" \ "Control write access to your terminal\n" \ " y Allow write access to your terminal\n" \ " n Disallow write access to your terminal" #define microcom_trivial_usage \ "[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY" #define microcom_full_usage "\n\n" \ "Copy bytes for stdin to TTY and from TTY to stdout\n" \ "\nOptions:" \ "\n -d Wait up to DELAY ms for TTY output before sending every" \ "\n next byte to it" \ "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \ "\n -s Set serial line to SPEED" \ "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \ #define mkdir_trivial_usage \ "[OPTION] DIRECTORY..." #define mkdir_full_usage "\n\n" \ "Create DIRECTORY\n" \ "\nOptions:" \ "\n -m Set permission mode (as in chmod), not rwxrwxrwx - umask" \ "\n -p No error if existing, make parent directories as needed" \ USE_SELINUX( \ "\n -Z Set security context" \ ) #define mkdir_example_usage \ "$ mkdir /tmp/foo\n" \ "$ mkdir /tmp/foo\n" \ "/tmp/foo: File exists\n" \ "$ mkdir /tmp/foo/bar/baz\n" \ "/tmp/foo/bar/baz: No such file or directory\n" \ "$ mkdir -p /tmp/foo/bar/baz\n" #define mke2fs_trivial_usage \ "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \ "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \ "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \ "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \ "[-M last-mounted-directory] [-S] [-T filesystem-type] " \ "device [blocks-count]" #define mke2fs_full_usage "\n\n" \ " -b size Block size in bytes" \ "\n -c Check for bad blocks before creating" \ "\n -E opts Set extended options" \ "\n -f size Fragment size in bytes" \ "\n -F Force (ignore sanity checks)" \ "\n -g num Number of blocks in a block group" \ "\n -i ratio The bytes/inode ratio" \ "\n -j Create a journal (ext3)" \ "\n -J opts Set journal options (size/device)" \ "\n -l file Read bad blocks list from file" \ "\n -L lbl Set the volume label" \ "\n -m percent Percent of fs blocks to reserve for admin" \ "\n -M dir Set last mounted directory" \ "\n -n Do not actually create anything" \ "\n -N num Number of inodes to create" \ "\n -o os Set the 'creator os' field" \ "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" \ "\n -q Quiet" \ "\n -r rev Set filesystem revision" \ "\n -S Write superblock and group descriptors only" \ "\n -T fs-type Set usage type (news/largefile/largefile4)" \ "\n -v Verbose" \ #define mkfifo_trivial_usage \ "[OPTIONS] name" #define mkfifo_full_usage "\n\n" \ "Create named pipe (identical to 'mknod name p')\n" \ "\nOptions:" \ "\n -m MODE Mode (default a=rw)" \ USE_SELINUX( \ "\n -Z Set security context" \ ) #define mkfs_minix_trivial_usage \ "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" #define mkfs_minix_full_usage "\n\n" \ "Make a MINIX filesystem\n" \ "\nOptions:" \ "\n -c Check device for bad blocks" \ "\n -n [14|30] Maximum length of filenames" \ "\n -i INODES Number of inodes for the filesystem" \ "\n -l FILENAME Read bad blocks list from FILENAME" \ "\n -v Make version 2 filesystem" \ #define mknod_trivial_usage \ "[OPTIONS] NAME TYPE MAJOR MINOR" #define mknod_full_usage "\n\n" \ "Create a special file (block, character, or pipe)\n" \ "\nOptions:" \ "\n -m Create the special file using the specified mode (default a=rw)" \ "\nTYPEs include:" \ "\n b: Make a block device" \ "\n c or u: Make a character device" \ "\n p: Make a named pipe (MAJOR and MINOR are ignored)" \ USE_SELINUX( \ "\n -Z Set security context" \ ) #define mknod_example_usage \ "$ mknod /dev/fd0 b 2 0\n" \ "$ mknod -m 644 /tmp/pipe p\n" #define mkswap_trivial_usage \ "DEVICE" #define mkswap_full_usage "\n\n" \ "Prepare block device to be used as swap partition" #if 0 "[-c] [-v0|-v1] DEVICE [BLOCKS]" "\nOptions:" "\n -c Check for readability" "\n -v0 Make swap version 0 (max 128M)" "\n -v1 Make swap version 1 (default for kernels > 2.1.117)" "\n BLOCKS Number of blocks to use (default is entire partition)" #endif #define mktemp_trivial_usage \ "[-dt] [-p DIR] TEMPLATE" #define mktemp_full_usage "\n\n" \ "Create a temporary file with its name based on TEMPLATE.\n" \ "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX).\n" \ "\nOptions:" \ "\n -d Make a directory instead of a file" \ /* "\n -q Fail silently if an error occurs" - we ignore it */ \ "\n -t Generate a path rooted in temporary directory" \ "\n -p DIR Use DIR as a temporary directory (implies -t)" \ "\n" \ "\n" \ "For -t or -p, directory is chosen as follows:\n" \ "$TMPDIR if set, else -p DIR, else /tmp" \ #define mktemp_example_usage \ "$ mktemp /tmp/temp.XXXXXX\n" \ "/tmp/temp.mWiLjM\n" \ "$ ls -la /tmp/temp.mWiLjM\n" \ "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" #define modprobe_trivial_usage \ "[-knqrsv] MODULE [symbol=value...]" #define modprobe_full_usage "\n\n" \ "Options:" \ "\n -k Make module autoclean-able" \ "\n -n Dry run" \ "\n -q Quiet" \ "\n -r Remove module (stacks) or do autoclean" \ "\n -s Report via syslog instead of stderr" \ "\n -v Verbose" \ #define modprobe_notes_usage \ "modprobe can (un)load a stack of modules, passing each module options (when\n" \ "loading). modprobe uses a configuration file to determine what option(s) to\n" \ "pass each module it loads.\n" \ "\n" \ "The configuration file is searched (in order) amongst:\n" \ "\n" \ " /etc/modprobe.conf (2.6 only)\n" \ " /etc/modules.conf\n" \ " /etc/conf.modules (deprecated)\n" \ "\n" \ "They all have the same syntax (see below). If none is present, it is\n" \ "_not_ an error; each loaded module is then expected to load without\n" \ "options. Once a file is found, the others are tested for.\n" \ "\n" \ "/etc/modules.conf entry format:\n" \ "\n" \ " alias \n" \ " Makes it possible to modprobe alias_name, when there is no such module.\n" \ " It makes sense if your mod_name is long, or you want a more representative\n" \ " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \ " This makes it also possible to use a different set of options (below) for\n" \ " the module and the alias.\n" \ " A module can be aliased more than once.\n" \ "\n" \ " options \n" \ " When loading module mod_name (or the module aliased by alias_name), pass\n" \ " the \"symbol=value\" pairs as option to that module.\n" \ "\n" \ "Sample /etc/modules.conf file:\n" \ "\n" \ " options tulip irq=3\n" \ " alias tulip tulip2\n" \ " options tulip2 irq=4 io=0x308\n" \ "\n" \ "Other functionality offered by 'classic' modprobe is not available in\n" \ "this implementation.\n" \ "\n" \ "If module options are present both in the config file, and on the command line,\n" \ "then the options from the command line will be passed to the module _after_\n" \ "the options from the config file. That way, you can have defaults in the config\n" \ "file, and override them for a specific usage from the command line.\n" #define modprobe_example_usage \ "(with the above /etc/modules.conf):\n\n" \ "$ modprobe tulip\n" \ " will load the module 'tulip' with default option 'irq=3'\n\n" \ "$ modprobe tulip irq=5\n" \ " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ "$ modprobe tulip2\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ " which are the default for alias 'tulip2'\n\n" \ "$ modprobe tulip2 irq=8\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \ " from the command line\n\n" \ "$ modprobe tulip2 irq=2 io=0x210\n" \ " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \ " from the command line\n" #define more_trivial_usage \ "[FILE...]" #define more_full_usage "\n\n" \ "View FILE or standard input one screenful at a time" #define more_example_usage \ "$ dmesg | more\n" #define mount_trivial_usage \ "[flags] DEVICE NODE [-o options,more-options]" #define mount_full_usage "\n\n" \ "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n" \ "\nOptions:" \ "\n -a Mount all filesystems in fstab" \ USE_FEATURE_MOUNT_FAKE( \ "\n -f "USE_FEATURE_MTAB_SUPPORT("Update /etc/mtab, but ")"don't mount" \ ) \ USE_FEATURE_MTAB_SUPPORT( \ "\n -n Don't update /etc/mtab" \ ) \ "\n -r Read-only mount" \ "\n -t fs-type Filesystem type" \ "\n -w Read-write mount (default)" \ "\n" \ "-o option:\n" \ USE_FEATURE_MOUNT_LOOP( \ " loop Ignored (loop devices are autodetected)\n" \ ) \ USE_FEATURE_MOUNT_FLAGS( \ " [a]sync Writes are asynchronous / synchronous\n" \ " [no]atime Disable / enable updates to inode access times\n" \ " [no]diratime Disable / enable atime updates to directories\n" \ " [no]dev Allow use of special device files / disallow them\n" \ " [no]exec Allow use of executable files / disallow them\n" \ " [no]suid Allow set-user-id-root programs / disallow them\n" \ " [r]shared Convert [recursively] to a shared subtree\n" \ " [r]slave Convert [recursively] to a slave subtree\n" \ " [r]private Convert [recursively] to a private subtree\n" \ " [un]bindable Make mount point [un]able to be bind mounted\n" \ " bind Bind a directory to an additional location\n" \ " move Relocate an existing mount point\n" \ ) \ " remount Remount a mounted filesystem, changing its flags\n" \ " ro/rw Mount for read-only / read-write\n" \ "\n" \ "There are EVEN MORE flags that are specific to each filesystem\n" \ "You'll have to see the written documentation for those filesystems" \ #define mount_example_usage \ "$ mount\n" \ "/dev/hda3 on / type minix (rw)\n" \ "proc on /proc type proc (rw)\n" \ "devpts on /dev/pts type devpts (rw)\n" \ "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ "$ mount cd_image.iso mydir\n" #define mount_notes_usage \ "Returns 0 for success, number of failed mounts for -a, or errno for one mount." #define mountpoint_trivial_usage \ "[-q] <[-d] DIR | -x DEVICE>" #define mountpoint_full_usage "\n\n" \ "mountpoint checks if the directory is a mountpoint\n" \ "\nOptions:" \ "\n -q Quiet" \ "\n -d Print major/minor device number of the filesystem" \ "\n -x Print major/minor device number of the blockdevice" \ #define mountpoint_example_usage \ "$ mountpoint /proc\n" \ "/proc is not a mountpoint\n" \ "$ mountpoint /sys\n" \ "/sys is a mountpoint\n" #define mt_trivial_usage \ "[-f device] opcode value" #define mt_full_usage "\n\n" \ "Control magnetic tape drive operation\n" \ "\n" \ "Available Opcodes:\n" \ "\n" \ "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ "setpart tell unload unlock weof wset" \ #define mv_trivial_usage \ "[OPTION]... SOURCE DEST\n" \ "or: mv [OPTION]... SOURCE... DIRECTORY" #define mv_full_usage "\n\n" \ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \ "\nOptions:" \ "\n -f Don't prompt before overwriting" \ "\n -i Interactive, prompt before overwrite" \ #define mv_example_usage \ "$ mv /tmp/foo /bin/bar\n" #define nameif_trivial_usage \ "[-s] [-c FILE] [{IFNAME MACADDR}]" #define nameif_full_usage "\n\n" \ "Rename network interface while it in the down state\n" \ "\nOptions:" \ "\n -c FILE Use configuration file (default is /etc/mactab)" \ "\n -s Use syslog (LOCAL0 facility)" \ "\n IFNAME MACADDR new_interface_name interface_mac_address" \ #define nameif_example_usage \ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ " or\n" \ "$ nameif -c /etc/my_mactab_file\n" \ #if !ENABLE_DESKTOP #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA #define NC_OPTIONS_STR "\n\nOptions:" #else #define NC_OPTIONS_STR #endif #define nc_trivial_usage \ USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \ "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]") #define nc_full_usage "\n\n" \ "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \ NC_OPTIONS_STR \ USE_NC_EXTRA( \ "\n -e Exec rest of command line after connect" \ "\n -i SECS Delay interval for lines sent" \ "\n -w SECS Timeout for connect" \ "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \ ) \ USE_NC_SERVER( \ "\n -l Listen mode, for inbound connects" \ USE_NC_EXTRA( \ "\n (use -l twice with -e for persistent server)") \ "\n -p PORT Local port number" \ ) #define nc_notes_usage "" \ USE_NC_EXTRA( \ "To use netcat as a terminal emulator on a serial port:\n\n" \ "$ stty 115200 -F /dev/ttyS0\n" \ "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ ) #define nc_example_usage \ "$ nc foobar.somedomain.com 25\n" \ "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ "help\n" \ "214-Commands supported:\n" \ "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ "214 NOOP QUIT RSET HELP\n" \ "quit\n" \ "221 foobar closing connection\n" #else /* DESKTOP nc - much more compatible with nc 1.10 */ #define nc_trivial_usage \ "[-options] hostname port - connect" \ USE_NC_SERVER("\n" \ "nc [-options] -l -p port [hostname] [port] - listen") #define nc_full_usage "\n\n" \ "Options:" \ "\n -e prog [args] Program to exec after connect (must be last)" \ USE_NC_SERVER( \ "\n -l Listen mode, for inbound connects" \ ) \ "\n -n Don't do DNS resolution" \ "\n -s addr Local address" \ "\n -p port Local port" \ "\n -u UDP mode" \ "\n -v Verbose (cumulative: -vv)" \ "\n -w secs Timeout for connects and final net reads" \ USE_NC_EXTRA( \ "\n -i sec Delay interval for lines sent" /* ", ports scanned" */ \ "\n -o file Hex dump of traffic" \ "\n -z Zero-I/O mode (scanning)" \ ) \ /* "\n -r Randomize local and remote ports" */ /* "\n -g gateway Source-routing hop point[s], up to 8" */ /* "\n -G num Source-routing pointer: 4, 8, 12, ..." */ /* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */ #endif #define netstat_trivial_usage \ "[-laentuwxr"USE_FEATURE_NETSTAT_WIDE("W")"]" #define netstat_full_usage "\n\n" \ "Display networking information\n" \ "\nOptions:" \ "\n -l Display listening server sockets" \ "\n -a Display all sockets (default: connected)" \ "\n -e Display other/more information" \ "\n -n Don't resolve names" \ "\n -t Tcp sockets" \ "\n -u Udp sockets" \ "\n -w Raw sockets" \ "\n -x Unix sockets" \ "\n -r Display routing table" \ USE_FEATURE_NETSTAT_WIDE( \ "\n -W Display with no column truncation" \ ) #define nice_trivial_usage \ "[-n ADJUST] [COMMAND [ARG]...]" #define nice_full_usage "\n\n" \ "Run a program with modified scheduling priority\n" \ "\nOptions:" \ "\n -n ADJUST Adjust the scheduling priority by ADJUST" \ #define nmeter_trivial_usage \ "format_string" #define nmeter_full_usage "\n\n" \ "Monitor system in real time\n\n" \ "Format specifiers:\n" \ "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \ " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \ "%[niface] Monitor network interface 'iface'\n" \ "%m Monitor allocated memory\n" \ "%[mf] Monitor free memory\n" \ "%[mt] Monitor total memory\n" \ "%s Monitor allocated swap\n" \ "%f Monitor number of used file descriptors\n" \ "%Ni Monitor total/specific IRQ rate\n" \ "%x Monitor context switch rate\n" \ "%p Monitor forks\n" \ "%[pn] Monitor # of processes\n" \ "%b Monitor block io\n" \ "%Nt Show time (with N decimal points)\n" \ "%Nd Milliseconds between updates (default=1000)\n" \ "%r Print instead of at EOL" \ #define nmeter_example_usage \ "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'" #define nohup_trivial_usage \ "COMMAND [ARGS]" #define nohup_full_usage "\n\n" \ "Run a command immune to hangups, with output to a non-tty" #define nohup_example_usage \ "$ nohup make &" #define nslookup_trivial_usage \ "[HOST] [SERVER]" #define nslookup_full_usage "\n\n" \ "Query the nameserver for the IP address of the given HOST\n" \ "optionally using a specified DNS server" #define nslookup_example_usage \ "$ nslookup localhost\n" \ "Server: default\n" \ "Address: default\n" \ "\n" \ "Name: debian\n" \ "Address: 127.0.0.1\n" #define od_trivial_usage \ "[-aBbcDdeFfHhIiLlOovXx] " USE_DESKTOP("[-t TYPE] ") "[FILE]" #define od_full_usage "\n\n" \ "Write an unambiguous representation, octal bytes by default, of FILE\n" \ "to standard output. With no FILE or when FILE is -, read standard input." #define openvt_trivial_usage \ "[-c NUM] [-sw] [COMMAND [ARGS]]" #define openvt_full_usage "\n\n" \ "Start COMMAND on a new virtual terminal\n" \ "\nOptions:" \ "\n -c Use specified VT" \ "\n -s Switch to the VT" \ /* "\n -l Run COMMAND as login shell (by prepending '-')" */ \ "\n -w Wait for COMMAND to exit" \ #define openvt_example_usage \ "openvt 2 /bin/ash\n" #define passwd_trivial_usage \ "[OPTION] [name]" #define passwd_full_usage "\n\n" \ "Change user's password. If no name is specified,\n" \ "changes the password for the current user.\n" \ "\nOptions:" \ "\n -a Algorithm to use for password (choices: des, md5)" /* ", sha1)" */ \ "\n -d Delete password for the account" \ "\n -l Lock (disable) account" \ "\n -u Unlock (re-enable) account" \ #define chpasswd_trivial_usage \ USE_GETOPT_LONG("[--md5|--encrypt]") SKIP_GETOPT_LONG("[-m|-e]") #define chpasswd_full_usage "\n\n" \ "Read user:password information from stdin\n" \ "and update /etc/passwd accordingly.\n" \ "\nOptions:" \ USE_GETOPT_LONG( \ "\n -e,--encrypt Supplied passwords are in encrypted form" \ "\n -m,--md5 Use MD5 encryption instead of DES" \ ) \ SKIP_GETOPT_LONG( \ "\n -e Supplied passwords are in encrypted form" \ "\n -m Use MD5 encryption instead of DES" \ ) #define patch_trivial_usage \ "[-p NUM] [-i DIFF] [-R]" #define patch_full_usage "\n\n" \ " -p NUM Strip NUM leading components from file names" \ "\n -i DIFF Read DIFF instead of stdin" \ "\n -R Reverse patch" \ #define patch_example_usage \ "$ patch -p1 < example.diff\n" \ "$ patch -p0 -i example.diff" #define pgrep_trivial_usage \ "[-flnovx] pattern" #define pgrep_full_usage "\n\n" \ "Display process(es) selected by regex pattern\n" \ "\nOptions:" \ "\n -l Show command name too" \ "\n -f Match against entire command line" \ "\n -n Show the newest process only" \ "\n -o Show the oldest process only" \ "\n -v Negate the matching" \ "\n -x Match whole name (not substring)" \ #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) #define pidof_trivial_usage \ "[OPTION] [NAME...]" #define USAGE_PIDOF "\n\nOptions:" #else #define pidof_trivial_usage \ "[NAME...]" #define USAGE_PIDOF /* none */ #endif #define pidof_full_usage "\n\n" \ "List PIDs of all processes with names that match NAMEs" \ USAGE_PIDOF \ USE_FEATURE_PIDOF_SINGLE( \ "\n -s Show only one PID") \ USE_FEATURE_PIDOF_OMIT( \ "\n -o PID Omit given pid" \ "\n Use %PPID to omit pid of pidof's parent") \ #define pidof_example_usage \ "$ pidof init\n" \ "1\n" \ USE_FEATURE_PIDOF_OMIT( \ "$ pidof /bin/sh\n20351 5973 5950\n") \ USE_FEATURE_PIDOF_OMIT( \ "$ pidof /bin/sh -o %PPID\n20351 5950") #if !ENABLE_FEATURE_FANCY_PING #define ping_trivial_usage \ "host" #define ping_full_usage "\n\n" \ "Send ICMP ECHO_REQUEST packets to network hosts" #define ping6_trivial_usage \ "host" #define ping6_full_usage "\n\n" \ "Send ICMP ECHO_REQUEST packets to network hosts" #else #define ping_trivial_usage \ "[OPTION]... host" #define ping_full_usage "\n\n" \ "Send ICMP ECHO_REQUEST packets to network hosts\n" \ "\nOptions:" \ "\n -4, -6 Force IPv4 or IPv6 hostname resolution" \ "\n -c CNT Send only CNT pings" \ "\n -s SIZE Send SIZE data bytes in packets (default=56)" \ "\n -I iface/IP Use interface or IP address as source" \ "\n -W timeout Seconds to wait for the first response (default:10)" \ "\n (after all -c CNT packets are sent)" \ "\n -w deadline Seconds until ping exits (default:infinite)" \ "\n (can exit earlier with -c CNT)" \ "\n -q Quiet, only displays output at start" \ "\n and when finished" \ #define ping6_trivial_usage \ "[OPTION]... host" #define ping6_full_usage "\n\n" \ "Send ICMP ECHO_REQUEST packets to network hosts\n" \ "\nOptions:" \ "\n -c CNT Send only CNT pings" \ "\n -s SIZE Send SIZE data bytes in packets (default=56)" \ "\n -I iface/IP Use interface or IP address as source" \ "\n -q Quiet, only displays output at start" \ "\n and when finished" \ #endif #define ping_example_usage \ "$ ping localhost\n" \ "PING slag (127.0.0.1): 56 data bytes\n" \ "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \ "\n" \ "--- debian ping statistics ---\n" \ "1 packets transmitted, 1 packets received, 0% packet loss\n" \ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" #define ping6_example_usage \ "$ ping6 ip6-localhost\n" \ "PING ip6-localhost (::1): 56 data bytes\n" \ "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \ "\n" \ "--- ip6-localhost ping statistics ---\n" \ "1 packets transmitted, 1 packets received, 0% packet loss\n" \ "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" #define pipe_progress_trivial_usage NOUSAGE_STR #define pipe_progress_full_usage "" #define pivot_root_trivial_usage \ "NEW_ROOT PUT_OLD" #define pivot_root_full_usage "\n\n" \ "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \ "the new root file system" #define pkill_trivial_usage \ "[-l] | [-fnovx] [-signal] pattern" #define pkill_full_usage "\n\n" \ "Send a signal to process(es) selected by regex pattern\n" \ "\nOptions:" \ "\n -l List all signals" \ "\n -f Match against entire command line" \ "\n -n Signal the newest process only" \ "\n -o Signal the oldest process only" \ "\n -v Negate the matching" \ "\n -x Match whole name (not substring)" \ #define poweroff_trivial_usage \ "[-d delay] [-n] [-f]" #define poweroff_full_usage "\n\n" \ "Halt and shut off power\n" \ "\nOptions:" \ "\n -d Delay interval for halting" \ "\n -n No call to sync()" \ "\n -f Force power off (don't go through init)" \ #define printenv_trivial_usage \ "[VARIABLES...]" #define printenv_full_usage "\n\n" \ "Print all or part of environment.\n" \ "If no environment VARIABLE specified, print them all." #define printf_trivial_usage \ "FORMAT [ARGUMENT...]" #define printf_full_usage "\n\n" \ "Format and print ARGUMENT(s) according to FORMAT,\n" \ "where FORMAT controls the output exactly as in C printf" #define printf_example_usage \ "$ printf \"Val=%d\\n\" 5\n" \ "Val=5\n" #if ENABLE_DESKTOP #define ps_trivial_usage \ "" #define ps_full_usage "\n\n" \ "Report process status\n" \ "\nOptions:" \ "\n -o col1,col2=header Select columns for display" \ #else /* !ENABLE_DESKTOP */ #if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE #define USAGE_PS "\nThis version of ps accepts no options" #else #define USAGE_PS "\nOptions:" #endif #define ps_trivial_usage \ "" #define ps_full_usage "\n\n" \ "Report process status\n" \ USAGE_PS \ USE_SELINUX( \ "\n -Z Show SE Linux context" \ ) \ USE_FEATURE_PS_WIDE( \ "\n w Wide output" \ ) #endif /* ENABLE_DESKTOP */ #define ps_example_usage \ "$ ps\n" \ " PID Uid Gid State Command\n" \ " 1 root root S init\n" \ " 2 root root S [kflushd]\n" \ " 3 root root S [kupdate]\n" \ " 4 root root S [kpiod]\n" \ " 5 root root S [kswapd]\n" \ " 742 andersen andersen S [bash]\n" \ " 743 andersen andersen S -bash\n" \ " 745 root root S [getty]\n" \ " 2990 andersen andersen R ps\n" #define pscan_trivial_usage \ "[-cb] [-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST" #define pscan_full_usage "\n\n" \ "Scan a host, print all open ports\n" \ "\nOptions:" \ "\n -c Show closed ports too" \ "\n -b Show blocked ports too" \ "\n -p Scan from this port (default 1)" \ "\n -P Scan up to this port (default 1024)" \ "\n -t Timeout (default 5000 ms)" \ "\n -T Minimum rtt (default 5 ms, increase for congested hosts)" \ #define pwd_trivial_usage \ "" #define pwd_full_usage "\n\n" \ "Print the full filename of the current working directory" #define pwd_example_usage \ "$ pwd\n" \ "/root\n" #define raidautorun_trivial_usage \ "DEVICE" #define raidautorun_full_usage "\n\n" \ "Tell the kernel to automatically search and start RAID arrays" #define raidautorun_example_usage \ "$ raidautorun /dev/md0" #define rdate_trivial_usage \ "[-sp] HOST" #define rdate_full_usage "\n\n" \ "Get and possibly set the system date and time from a remote HOST\n" \ "\nOptions:" \ "\n -s Set the system date and time (default)" \ "\n -p Print the date and time" \ #define readahead_trivial_usage \ "[FILE]..." #define readahead_full_usage "\n\n" \ "Preload FILE(s) in RAM cache so that subsequent reads for those" \ "files do not block on disk I/O" #define readlink_trivial_usage \ USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE" #define readlink_full_usage "\n\n" \ "Display the value of a symlink" \ USE_FEATURE_READLINK_FOLLOW( "\n" \ "\nOptions:" \ "\n -f Canonicalize by following all symlinks") \ #define readprofile_trivial_usage \ "[OPTIONS]..." #define readprofile_full_usage "\n\n" \ "Options:" \ "\n -m mapfile (Default: /boot/System.map)" \ "\n -p profile (Default: /proc/profile)" \ "\n -M mult Set the profiling multiplier to mult" \ "\n -i Print only info about the sampling step" \ "\n -v Verbose" \ "\n -a Print all symbols, even if count is 0" \ "\n -b Print individual histogram-bin counts" \ "\n -s Print individual counters within functions" \ "\n -r Reset all the counters (root only)" \ "\n -n Disable byte order auto-detection" \ #define realpath_trivial_usage \ "pathname..." #define realpath_full_usage "\n\n" \ "Return the absolute pathnames of given argument" #define reboot_trivial_usage \ "[-d delay] [-n] [-f]" #define reboot_full_usage "\n\n" \ "Reboot the system\n" \ "\nOptions:" \ "\n -d Delay interval for rebooting" \ "\n -n No call to sync()" \ "\n -f Force reboot (don't go through init)" \ #define renice_trivial_usage \ "{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]" #define renice_full_usage "\n\n" \ "Change priority of running processes\n" \ "\nOptions:" \ "\n -n Adjust current nice value (smaller is faster)" \ "\n -p Process id(s) (default)" \ "\n -g Process group id(s)" \ "\n -u Process user name(s) and/or id(s)" \ #define reset_trivial_usage \ "" #define reset_full_usage "\n\n" \ "Reset the screen" #define resize_trivial_usage \ "" #define resize_full_usage "\n\n" \ "Resize the screen" #define restorecon_trivial_usage \ "[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]" #define restorecon_full_usage "\n\n" \ "Reset security contexts of files in pathname\n" \ "\n -i Ignore files that do not exist" \ "\n -f file File with list of files to process. Use - for stdin" \ "\n -e directory Directory to exclude" \ "\n -R,-r Recurse directories" \ "\n -n Don't change any file labels" \ "\n -o file Save list of files with incorrect context" \ "\n -v Verbose" \ "\n -vv Show changed labels" \ "\n -F Force reset of context to match file_context" \ "\n for customizable files, or the user section," \ "\n if it has changed" \ #define rm_trivial_usage \ "[OPTION]... FILE..." #define rm_full_usage "\n\n" \ "Remove (unlink) the FILE(s). Use '--' to\n" \ "indicate that all following arguments are non-options.\n" \ "\nOptions:" \ "\n -i Always prompt before removing" \ "\n -f Never prompt" \ "\n -r,-R Remove directories recursively" \ #define rm_example_usage \ "$ rm -rf /tmp/foo\n" #define rmdir_trivial_usage \ "[OPTION]... DIRECTORY..." #define rmdir_full_usage "\n\n" \ "Remove the DIRECTORY, if it is empty" #define rmdir_example_usage \ "# rmdir /tmp/foo\n" #define rmmod_trivial_usage \ "[OPTION]... [MODULE]..." #define rmmod_full_usage "\n\n" \ "Unload the specified kernel modules from the kernel\n" \ "\nOptions:" \ "\n -a Remove all unused modules (recursively)" \ #define rmmod_example_usage \ "$ rmmod tulip\n" #define route_trivial_usage \ "[{add|del|delete}]" #define route_full_usage "\n\n" \ "Edit the kernel's routing tables\n" \ "\nOptions:" \ "\n -n Don't resolve names" \ "\n -e Display other/more information" \ "\n -A inet" USE_FEATURE_IPV6("{6}") " Select address family" \ #define rpm_trivial_usage \ "-i -q[ildc]p package.rpm" #define rpm_full_usage "\n\n" \ "Manipulate RPM packages\n" \ "\nOptions:" \ "\n -i Install package" \ "\n -q Query package" \ "\n -p Query uninstalled package" \ "\n -i Show information" \ "\n -l List contents" \ "\n -d List documents" \ "\n -c List config files" \ #define rpm2cpio_trivial_usage \ "package.rpm" #define rpm2cpio_full_usage "\n\n" \ "Output a cpio archive of the rpm file" #define rtcwake_trivial_usage \ "[-a | -l | -u] [-d DEV] [-m MODE] [-s SECS | -t TIME]" #define rtcwake_full_usage "\n\n" \ "Enter a system sleep state until specified wakeup time\n" \ USE_GETOPT_LONG( \ "\n -a,--auto Read clock mode from adjtime" \ "\n -l,--local Clock is set to local time" \ "\n -u,--utc Clock is set to UTC time" \ "\n -d,--device=DEV Specify the RTC device" \ "\n -m,--mode=MODE Set the sleep state (default: suspend)" \ "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \ "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \ ) \ SKIP_GETOPT_LONG( \ "\n -a Read clock mode from adjtime" \ "\n -l Clock is set to local time" \ "\n -u Clock is set to UTC time" \ "\n -d DEV Specify the RTC device" \ "\n -m MODE Set the sleep state (default: standby)" \ "\n -s SEC Set the timeout in SEC seconds from now" \ "\n -t TIME Set the timeout to TIME seconds from epoch" \ ) #define runcon_trivial_usage \ "[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \ " runcon CONTEXT COMMAND [args]" #define runcon_full_usage "\n\n" \ "Run a program in a different security context\n" \ "\n CONTEXT Complete security context\n" \ USE_GETOPT_LONG( \ "\n -c,--compute Compute process transition context before modifying" \ "\n -t,--type=TYPE Type (for same role as parent)" \ "\n -u,--user=USER User identity" \ "\n -r,--role=ROLE Role" \ "\n -l,--range=RNG Levelrange" \ ) \ SKIP_GETOPT_LONG( \ "\n -c Compute process transition context before modifying" \ "\n -t TYPE Type (for same role as parent)" \ "\n -u USER User identity" \ "\n -r ROLE Role" \ "\n -l RNG Levelrange" \ ) #define run_parts_trivial_usage \ "[-t] "USE_FEATURE_RUN_PARTS_FANCY("[-l] ")"[-a ARG] [-u MASK] DIRECTORY" #define run_parts_full_usage "\n\n" \ "Run a bunch of scripts in a directory\n" \ "\nOptions:" \ "\n -t Print what would be run, but don't actually run anything" \ "\n -a ARG Pass ARG as argument for every program" \ "\n -u MASK Set the umask to MASK before running every program" \ USE_FEATURE_RUN_PARTS_FANCY( \ "\n -l Print names of all matching files even if they are not executable" \ ) #define run_parts_example_usage \ "$ run-parts -a start /etc/init.d\n" \ "$ run-parts -a stop=now /etc/init.d\n\n" \ "Let's assume you have a script foo/dosomething:\n" \ "#!/bin/sh\n" \ "for i in $*; do eval $i; done; unset i\n" \ "case \"$1\" in\n" \ "start*) echo starting something;;\n" \ "stop*) set -x; shutdown -h $stop;;\n" \ "esac\n\n" \ "Running this yields:\n" \ "$run-parts -a stop=+4m foo/\n" \ "+ shutdown -h +4m" #define runlevel_trivial_usage \ "[utmp]" #define runlevel_full_usage "\n\n" \ "Find the current and previous system runlevel.\n\n" \ "If no utmp file exists or if no runlevel record can be found,\n" \ "print \"unknown\"" #define runlevel_example_usage \ "$ runlevel /var/run/utmp\n" \ "N 2" #define runsv_trivial_usage \ "dir" #define runsv_full_usage "\n\n" \ "Start and monitor a service and optionally an appendant log service" #define runsvdir_trivial_usage \ "[-P] dir" #define runsvdir_full_usage "\n\n" \ "Start a runsv process for each subdirectory" #define rx_trivial_usage \ "FILE" #define rx_full_usage "\n\n" \ "Receive a file using the xmodem protocol" #define rx_example_usage \ "$ rx /tmp/foo\n" #define script_trivial_usage \ "[-afq] [-c COMMAND] [OUTFILE]" #define script_full_usage "\n\n" \ "Options:" \ "\n -a Append output" \ "\n -c Run COMMAND, not shell" \ "\n -f Flush output after each write" \ "\n -q Quiet" \ #define sed_trivial_usage \ "[-efinr] pattern [files...]" #define sed_full_usage "\n\n" \ "Options:" \ "\n -e script Add the script to the commands to be executed" \ "\n -f scriptfile Add scriptfile contents to the" \ "\n commands to be executed" \ "\n -i Edit files in-place" \ "\n -n Suppress automatic printing of pattern space" \ "\n -r Use extended regular expression syntax" \ "\n" \ "\nIf no -e or -f is given, the first non-option argument is taken as the sed" \ "\nscript to interpret. All remaining arguments are names of input files; if no" \ "\ninput files are specified, then the standard input is read. Source files" \ "\nwill not be modified unless -i option is given." \ #define sed_example_usage \ "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ "bar\n" #define selinuxenabled_trivial_usage NOUSAGE_STR #define selinuxenabled_full_usage "" #define sendmail_trivial_usage \ "[-w timeout] [-U user] [-P password] [-X]\n" \ "-t to [-t to]... [-n] [-s subject] [-c charset] server[:port] from [body] [attachment ...]" #define sendmail_full_usage "\n\n" \ "Send an email.\n" \ "\nOptions:" \ "\n -w timeout Set timeout on network operations" \ "\n -U username Authenticate with specified username/password" \ "\n -P password" \ "\n -t address Recipient(s). May be repeated" \ "\n -X Use openssl connection helper for secured servers" \ "\n -n Request delivery notification to sender" \ "\n -s subject Subject" \ "\n -c charset Assumed charset for body and subject [utf-8]" \ #define seq_trivial_usage \ "[first [increment]] last" #define seq_full_usage "\n\n" \ "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \ "FIRST, INCREMENT default to 1" \ "\n\nArguments:\n" \ " LAST\n" \ " FIRST LAST\n" \ " FIRST INCREMENT LAST" #define sestatus_trivial_usage \ "[-vb]" #define sestatus_full_usage "\n\n" \ " -v Verbose" \ "\n -b Display current state of booleans" \ #define setconsole_trivial_usage \ "[-r" USE_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]" #define setconsole_full_usage "\n\n" \ "Redirect system console output to DEVICE (default: /dev/tty)\n" \ "\nOptions:" \ "\n -r Reset output to /dev/console" \ #define setenforce_trivial_usage \ "[Enforcing | Permissive | 1 | 0]" #define setenforce_full_usage "" #define setfiles_trivial_usage \ "[-dnpqsvW] [-e dir]... [-o file] [-r alt_root_path]" \ USE_FEATURE_SETFILES_CHECK_OPTION( \ " [-c policyfile] spec_file" \ ) \ " pathname" #define setfiles_full_usage "\n\n" \ "Reset file contexts under pathname according to spec_file\n" \ USE_FEATURE_SETFILES_CHECK_OPTION( \ "\n -c file Check the validity of the contexts against the specified binary policy" \ ) \ "\n -d Show which specification matched each file" \ "\n -l Log changes in file labels to syslog" \ "\n -n Don't change any file labels" \ "\n -q Suppress warnings" \ "\n -r dir Use an altenate root path" \ "\n -e dir Exclude directory" \ "\n -F Force reset of context to match file_context for customizable files" \ "\n -o file Save list of files with incorrect context" \ "\n -s Take a list of files from standard input (instead of command line)" \ "\n -v Show changes in file labels, if type or role are changing" \ "\n -vv Show changes in file labels, if type, role, or user are changing" \ "\n -W Display warnings about entries that had no matching files" \ #define setkeycodes_trivial_usage \ "SCANCODE KEYCODE..." #define setkeycodes_full_usage "\n\n" \ "Set entries into the kernel's scancode-to-keycode map,\n" \ "allowing unusual keyboards to generate usable keycodes.\n\n" \ "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ "and KEYCODE is given in decimal" \ #define setkeycodes_example_usage \ "$ setkeycodes e030 127\n" #define setlogcons_trivial_usage \ "N" #define setlogcons_full_usage "\n\n" \ "Redirect the kernel output to console N (0 for current)" #define setsebool_trivial_usage \ "boolean value" #define setsebool_full_usage "\n\n" \ "Change boolean setting" #define setsid_trivial_usage \ "PROG [ARG...]" #define setsid_full_usage "\n\n" \ "Run PROG in a new session. PROG will have no controlling terminal\n" \ "and will not be affected by keyboard signals (Ctrl-C etc).\n" \ "See setsid(2) for details." \ #define lash_trivial_usage \ "[FILE]...\n" \ "or: sh -c command [args]..." #define lash_full_usage "\n\n" \ "lash is deprecated, please use hush" #define last_trivial_usage \ ""USE_FEATURE_LAST_FANCY("[-HW] [-f file]") #define last_full_usage "\n\n" \ "Show listing of the last users that logged into the system" \ USE_FEATURE_LAST_FANCY( "\n" \ "\nOptions:" \ /* "\n -H Show header line" */ \ "\n -W Display with no host column truncation" \ "\n -f file Read from file instead of /var/log/wtmp" \ ) #define sha1sum_trivial_usage \ "[OPTION] [FILEs...]" \ USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") #define sha1sum_full_usage "\n\n" \ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums." \ USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \ "\nOptions:" \ "\n -c Check SHA1 sums against given list" \ "\n -s Don't output anything, status code shows success" \ "\n -w Warn about improperly formatted SHA1 checksum lines" \ ) #define slattach_trivial_usage \ "[-cehmLF] [-s speed] [-p protocol] DEVICEs" #define slattach_full_usage "\n\n" \ "Attach network interface(s) to serial line(s)\n" \ "\nOptions:" \ "\n -p Set protocol (slip, cslip, slip6, clisp6 or adaptive)" \ "\n -s Set line speed" \ "\n -e Exit after initializing device" \ "\n -h Exit when the carrier is lost" \ "\n -c Execute a command when the line is hung up" \ "\n -m Do NOT initialize the line in raw 8 bits mode" \ "\n -L Enable 3-wire operation" \ "\n -F Disable RTS/CTS flow control" \ #define sleep_trivial_usage \ USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...") #define sleep_full_usage "\n\n" \ SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \ USE_FEATURE_FANCY_SLEEP( \ "Pause for a time equal to the total of the args given, where each arg can\n" \ "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays") #define sleep_example_usage \ "$ sleep 2\n" \ "[2 second delay results]\n" \ USE_FEATURE_FANCY_SLEEP( \ "$ sleep 1d 3h 22m 8s\n" \ "[98528 second delay results]\n") #define sort_trivial_usage \ "[-nru" \ USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \ "] [FILE]..." #define sort_full_usage "\n\n" \ "Sort lines of text\n" \ "\nOptions:" \ USE_FEATURE_SORT_BIG( \ "\n -b Ignore leading blanks" \ "\n -c Check whether input is sorted" \ "\n -d Dictionary order (blank or alphanumeric only)" \ "\n -f Ignore case" \ "\n -g General numerical sort" \ "\n -i Ignore unprintable characters" \ "\n -k Sort key" \ "\n -M Sort month" \ ) \ "\n -n Sort numbers" \ USE_FEATURE_SORT_BIG( \ "\n -o Output to file" \ "\n -k Sort by key" \ "\n -t CHAR Key separator" \ ) \ "\n -r Reverse sort order" \ USE_FEATURE_SORT_BIG( \ "\n -s Stable (don't sort ties alphabetically)" \ ) \ "\n -u Suppress duplicate lines" \ USE_FEATURE_SORT_BIG( \ "\n -z Lines are terminated by NUL, not newline" \ "\n -mST Ignored for GNU compatibility") \ #define sort_example_usage \ "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ "a\n" \ "b\n" \ "c\n" \ "d\n" \ "e\n" \ "f\n" \ USE_FEATURE_SORT_BIG( \ "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \ "d 2\n" \ "b 2\n" \ "c 3\n" \ ) \ "" #define split_trivial_usage \ "[OPTION] [INPUT [PREFIX]]" #define split_full_usage "\n\n" \ "Options:" \ "\n -b n[k|m] Split by bytes" \ "\n -l n Split by lines" \ "\n -a n Use n letters as suffix" \ #define split_example_usage \ "$ split TODO foo\n" \ "$ cat TODO | split -a 2 -l 2 TODO_\n" #define start_stop_daemon_trivial_usage \ "[OPTIONS] [" \ USE_GETOPT_LONG("--start|--stop") SKIP_GETOPT_LONG("-S|-K") \ "] ... [-- arguments...]" #define start_stop_daemon_full_usage "\n\n" \ "Search for matching processes, and then\n" \ "-S: stop all matching processes.\n" \ "-K: start a process unless a matching process is found.\n" \ USE_GETOPT_LONG( \ "\nProcess matching:" \ "\n -u,--user USERNAME|UID Match only this user's processes" \ "\n -n,--name NAME Match processes with NAME" \ "\n in comm field in /proc/PID/stat" \ "\n -x,--exec EXECUTABLE Match processes with this command" \ "\n in /proc/PID/cmdline" \ "\n -p,--pidfile FILE Match a process with PID from the file" \ "\n All specified conditions must match" \ "\n-K only:" \ "\n -x,--exec EXECUTABLE Program to run" \ "\n -a,--startas NAME Zeroth argument" \ "\n -b,--background Background" \ USE_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -N,--nicelevel N Change nice level" \ ) \ "\n -c,--chuid USER[:[GRP]] Change to user/group" \ "\n -m,--make-pidfile Write PID to the pidfile specified by -p" \ "\n-S only:" \ "\n -s,--signal SIG Signal to send" \ "\n -t,--test Match only, exit with 0 if a process is found" \ "\nOther:" \ USE_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -o,--oknodo Exit with status 0 if nothing is done" \ "\n -q,--quiet Quiet" \ ) \ "\n -v,--verbose Verbose" \ ) \ SKIP_GETOPT_LONG( \ "\nProcess matching:" \ "\n -u USERNAME|UID Match only this user's processes" \ "\n -n NAME Match processes with NAME" \ "\n in comm field in /proc/PID/stat" \ "\n -x EXECUTABLE Match processes with this command" \ "\n command in /proc/PID/cmdline" \ "\n -p FILE Match a process with PID from the file" \ "\n All specified conditions must match" \ "\n-K only:" \ "\n -x EXECUTABLE Program to run" \ "\n -a NAME Zeroth argument" \ "\n -b Background" \ USE_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -N N Change nice level" \ ) \ "\n -c USER[:[GRP]] Change to user/group" \ "\n -m Write PID to the pidfile specified by -p" \ "\n-S only:" \ "\n -s SIG Signal to send" \ "\n -t Match only, exit with 0 if a process is found" \ "\nOther:" \ USE_FEATURE_START_STOP_DAEMON_FANCY( \ "\n -o Exit with status 0 if nothing is done" \ "\n -q Quiet" \ ) \ "\n -v Verbose" \ ) \ #define stat_trivial_usage \ "[OPTION] FILE..." #define stat_full_usage "\n\n" \ "Display file (default) or filesystem status\n" \ "\nOptions:" \ USE_FEATURE_STAT_FORMAT( \ "\n -c fmt Use the specified format" \ ) \ "\n -f Display filesystem status" \ "\n -L Dereference links" \ "\n -t Display info in terse form" \ USE_SELINUX( \ "\n -Z Print security context" \ ) \ USE_FEATURE_STAT_FORMAT( \ "\n\nValid format sequences for files:\n" \ " %a Access rights in octal\n" \ " %A Access rights in human readable form\n" \ " %b Number of blocks allocated (see %B)\n" \ " %B The size in bytes of each block reported by %b\n" \ " %d Device number in decimal\n" \ " %D Device number in hex\n" \ " %f Raw mode in hex\n" \ " %F File type\n" \ " %g Group ID of owner\n" \ " %G Group name of owner\n" \ " %h Number of hard links\n" \ " %i Inode number\n" \ " %n File name\n" \ " %N Quoted file name with dereference if symlink\n" \ " %o I/O block size\n" \ " %s Total size, in bytes\n" \ " %t Major device type in hex\n" \ " %T Minor device type in hex\n" \ " %u User ID of owner\n" \ " %U User name of owner\n" \ " %x Time of last access\n" \ " %X Time of last access as seconds since Epoch\n" \ " %y Time of last modification\n" \ " %Y Time of last modification as seconds since Epoch\n" \ " %z Time of last change\n" \ " %Z Time of last change as seconds since Epoch\n" \ "\nValid format sequences for file systems:\n" \ " %a Free blocks available to non-superuser\n" \ " %b Total data blocks in file system\n" \ " %c Total file nodes in file system\n" \ " %d Free file nodes in file system\n" \ " %f Free blocks in file system\n" \ USE_SELINUX( \ " %C Security context in SELinux\n" \ ) \ " %i File System ID in hex\n" \ " %l Maximum length of filenames\n" \ " %n File name\n" \ " %s Block size (for faster transfer)\n" \ " %S Fundamental block size (for block counts)\n" \ " %t Type in hex\n" \ " %T Type in human readable form" \ ) #define strings_trivial_usage \ "[-afo] [-n length] [file...]" #define strings_full_usage "\n\n" \ "Display printable strings in a binary file\n" \ "\nOptions:" \ "\n -a Scan whole file (default)" \ "\n -f Precede strings with filenames" \ "\n -n N At least N characters form a string (default 4)" \ "\n -o Precede strings with decimal offsets" \ #define stty_trivial_usage \ "[-a|g] [-F DEVICE] [SETTING]..." #define stty_full_usage "\n\n" \ "Without arguments, prints baud rate, line discipline,\n" \ "and deviations from stty sane\n" \ "\nOptions:" \ "\n -F DEVICE Open device instead of stdin" \ "\n -a Print all current settings in human-readable form" \ "\n -g Print in stty-readable form" \ "\n [SETTING] See manpage" \ #define su_trivial_usage \ "[OPTION]... [-] [username]" #define su_full_usage "\n\n" \ "Change user id or become root\n" \ "\nOptions:" \ "\n -p, -m Preserve environment" \ "\n -c Command to pass to 'sh -c'" \ "\n -s Shell to use instead of default shell" \ #define sulogin_trivial_usage \ "[OPTION]... [tty-device]" #define sulogin_full_usage "\n\n" \ "Single user login\n" \ "\nOptions:" \ "\n -t Timeout" \ #define sum_trivial_usage \ "[rs] [files...]" #define sum_full_usage "\n\n" \ "Checksum and count the blocks in a file\n" \ "\nOptions:" \ "\n -r Use BSD sum algorithm (1K blocks)" \ "\n -s Use System V sum algorithm (512byte blocks)" \ #define sv_trivial_usage \ "[-v] [-w sec] command service..." #define sv_full_usage "\n\n" \ "Control services monitored by runsv supervisor.\n" \ "Commands (only first character is enough):\n" \ "\n" \ "status: query service status\n" \ "up: if service isn't running, start it. If service stops, restart it\n" \ "once: like 'up', but if service stops, don't restart it\n" \ "down: send TERM and CONT signals. If ./run exits, start ./finish\n" \ " if it exists. After it stops, do not restart service\n" \ "exit: send TERM and CONT signals to service and log service. If they exit,\n" \ " runsv exits too\n" \ "pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \ "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \ #define svlogd_trivial_usage \ "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..." #define svlogd_full_usage "\n\n" \ "Continuously read log data from standard input, optionally " \ "filter log messages, and write the data to one or more automatically " \ "rotated logs" \ #define swapoff_trivial_usage \ "[-a] [DEVICE]" #define swapoff_full_usage "\n\n" \ "Stop swapping on DEVICE\n" \ "\nOptions:" \ "\n -a Stop swapping on all swap devices" \ #define swapon_trivial_usage \ "[-a]" USE_FEATURE_SWAPON_PRI(" [-p pri]") " [DEVICE]" #define swapon_full_usage "\n\n" \ "Start swapping on DEVICE\n" \ "\nOptions:" \ "\n -a Start swapping on all swap devices" \ USE_FEATURE_SWAPON_PRI( \ "\n -p pri Set swap device priority" \ ) \ #define switch_root_trivial_usage \ "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" #define switch_root_full_usage "\n\n" \ "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ "and exec NEW_INIT\n" \ "\nOptions:" \ "\n -c Redirect console to device on new root" \ #define sync_trivial_usage \ "" #define sync_full_usage "\n\n" \ "Write all buffered filesystem blocks to disk" #define sysctl_trivial_usage \ "[OPTIONS]... [VALUE]..." #define sysctl_full_usage "\n\n" \ "Configure kernel parameters at runtime\n" \ "\nOptions:" \ "\n -n Disable printing of key names" \ "\n -e Don't warn about unknown keys" \ "\n -w Change sysctl setting" \ "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \ "\n -a Display all values" \ "\n -A Display all values in table form" \ #define sysctl_example_usage \ "sysctl [-n] [-e] variable...\n" \ "sysctl [-n] [-e] -w variable=value...\n" \ "sysctl [-n] [-e] -a\n" \ "sysctl [-n] [-e] -p file (default /etc/sysctl.conf)\n" \ "sysctl [-n] [-e] -A\n" #define syslogd_trivial_usage \ "[OPTION]..." #define syslogd_full_usage "\n\n" \ "System logging utility.\n" \ "Note that this version of syslogd ignores /etc/syslog.conf.\n" \ "\nOptions:" \ "\n -n Run in foreground" \ "\n -O FILE Log to given file (default=/var/log/messages)" \ "\n -l n Set local log level" \ "\n -S Smaller logging output" \ USE_FEATURE_ROTATE_LOGFILE( \ "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \ "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \ USE_FEATURE_REMOTE_LOG( \ "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \ "\n -L Log locally and via network (default is network only if -R)") \ USE_FEATURE_SYSLOGD_DUP( \ "\n -D Drop duplicates") \ USE_FEATURE_IPC_SYSLOG( \ "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \ /* NB: -Csize shouldn't have space (because size is optional) */ /* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */ #define syslogd_example_usage \ "$ syslogd -R masterlog:514\n" \ "$ syslogd -R 192.168.1.1:601\n" #define tac_trivial_usage \ "[FILE]..." #define tac_full_usage "\n\n" \ "Concatenate FILE(s) and print them in reverse" #define tail_trivial_usage \ "[OPTION]... [FILE]..." #define tail_full_usage "\n\n" \ "Print last 10 lines of each FILE to standard output.\n" \ "With more than one FILE, precede each with a header giving the\n" \ "file name. With no FILE, or when FILE is -, read standard input.\n" \ "\nOptions:" \ USE_FEATURE_FANCY_TAIL( \ "\n -c N[kbm] Output the last N bytes") \ "\n -n N[kbm] Print last N lines instead of last 10" \ "\n -f Output data as the file grows" \ USE_FEATURE_FANCY_TAIL( \ "\n -q Never output headers giving file names" \ "\n -s SEC Wait SEC seconds between reads with -f" \ "\n -v Always output headers giving file names" \ "\n\n" \ "If the first character of N (bytes or lines) is a '+', output begins with\n" \ "the Nth item from the start of each file, otherwise, print the last N items\n" \ "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \ #define tail_example_usage \ "$ tail -n 1 /etc/resolv.conf\n" \ "nameserver 10.0.0.1\n" #define tar_trivial_usage \ "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \ USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \ USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \ USE_FEATURE_TAR_FROM("[-X FILE] ") \ "[-f TARFILE] [-C DIR] [FILE(s)]..." #define tar_full_usage "\n\n" \ "Create, extract, or list files from a tar file\n" \ "\nOptions:" \ USE_FEATURE_TAR_CREATE( \ "\n c Create") \ "\n x Extract" \ "\n t List" \ "\nArchive format selection:" \ USE_FEATURE_TAR_GZIP( \ "\n z Filter the archive through gzip" \ ) \ USE_FEATURE_TAR_BZIP2( \ "\n j Filter the archive through bzip2" \ ) \ USE_FEATURE_TAR_LZMA( \ "\n a Filter the archive through lzma" \ ) \ USE_FEATURE_TAR_COMPRESS( \ "\n Z Filter the archive through compress" \ ) \ "\nFile selection:" \ "\n f Name of TARFILE or \"-\" for stdin" \ "\n O Extract to stdout" \ USE_FEATURE_TAR_FROM( \ "\n exclude File to exclude" \ "\n X File with names to exclude" \ ) \ "\n C Change to directory DIR before operation" \ "\n v Verbose" \ #define tar_example_usage \ "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ "$ tar -cf /tmp/tarball.tar /usr/local\n" #define taskset_trivial_usage \ "[-p] [mask] [pid | command [arg]...]" #define taskset_full_usage "\n\n" \ "Set or get CPU affinity\n" \ "\nOptions:" \ "\n -p Operate on an existing PID" \ #define taskset_example_usage \ "$ taskset 0x7 ./dgemm_test&\n" \ "$ taskset -p 0x1 $!\n" \ "pid 4790's current affinity mask: 7\n" \ "pid 4790's new affinity mask: 1\n" \ "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ "pid 6671's current affinity mask: 1\n" \ "pid 6671's new affinity mask: 1\n" \ "$ taskset -p 1\n" \ "pid 1's current affinity mask: 3\n" #define tee_trivial_usage \ "[OPTION]... [FILE]..." #define tee_full_usage "\n\n" \ "Copy standard input to each FILE, and also to standard output\n" \ "\nOptions:" \ "\n -a Append to the given FILEs, do not overwrite" \ "\n -i Ignore interrupt signals (SIGINT)" \ #define tee_example_usage \ "$ echo \"Hello\" | tee /tmp/foo\n" \ "$ cat /tmp/foo\n" \ "Hello\n" #if ENABLE_FEATURE_TELNET_AUTOLOGIN #define telnet_trivial_usage \ "[-a] [-l USER] HOST [PORT]" #define telnet_full_usage "\n\n" \ "Connect to telnet server\n" \ "\nOptions:" \ "\n -a Attempt an automatic login with USER variable" \ "\n -l USER Attempt an automatic login with USER argument" \ #else #define telnet_trivial_usage \ "HOST [PORT]" #define telnet_full_usage "\n\n" \ "Connect to telnet server" #endif #define telnetd_trivial_usage \ "[OPTION]" #define telnetd_full_usage "\n\n" \ "Handle incoming telnet connections" \ SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \ "\nOptions:" \ "\n -l LOGIN Exec LOGIN on connect" \ "\n -f issue_file Display issue_file instead of /etc/issue" \ "\n -K Close connection as soon as login exits" \ "\n (normally wait until all programs close slave pty)" \ USE_FEATURE_TELNETD_STANDALONE( \ "\n -p PORT Port to listen on" \ "\n -b ADDR Address to bind to" \ "\n -F Run in foreground" \ "\n -i Run as inetd subservice" \ ) #define test_trivial_usage \ "EXPRESSION\n" \ " or [ EXPRESSION ]" #define test_full_usage "\n\n" \ "Check file types and compares values returning an exit code\n" \ "determined by the value of EXPRESSION" #define test_example_usage \ "$ test 1 -eq 2\n" \ "$ echo $?\n" \ "1\n" \ "$ test 1 -eq 1\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /etc ]\n" \ "$ echo $?\n" \ "0\n" \ "$ [ -d /junk ]\n" \ "$ echo $?\n" \ "1\n" #define tcpsvd_trivial_usage \ "[-hEv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] ip port prog..." /* with not-implemented options: */ /* "[-hpEvv] [-c n] [-C n:msg] [-b n] [-u user] [-l name] [-i dir|-x cdb] [-t sec] ip port prog..." */ #define tcpsvd_full_usage "\n\n" \ "Create TCP socket, bind it to ip:port and listen\n" \ "for incoming connection. Run PROG for each connection.\n" \ "\nip IP to listen on. '0' = all" \ "\nport Port to listen on" \ "\nprog [arg] Program to run" \ "\n-l name Local hostname (else looks up local hostname in DNS)" \ "\n-u user[:group] Change to user/group after bind" \ "\n-c n Handle up to n connections simultaneously" \ "\n-b n Allow a backlog of approximately n TCP SYNs" \ "\n-C n[:msg] Allow only up to n connections from the same IP" \ "\n New connections from this IP address are closed" \ "\n immediately. 'msg' is written to the peer before close" \ "\n-h Look up peer's hostname" \ "\n-E Do not set up environment variables" \ "\n-v Verbose" \ #define udpsvd_trivial_usage \ "[-hEv] [-c n] [-u user] [-l name] ip port prog" #define udpsvd_full_usage "\n\n" \ "Create UDP socket, bind it to ip:port and wait\n" \ "for incoming packets. Run PROG for each packet,\n" \ "redirecting all further packets with same peer ip:port to it\n" \ "\nip IP to listen on. '0' = all" \ "\nport Port to listen on" \ "\nprog [arg] Program to run" \ "\n-l name Local hostname (else looks up local hostname in DNS)" \ "\n-u user[:group] Change to user/group after bind" \ "\n-c n Handle up to n connections simultaneously" \ "\n-h Look up peer's hostname" \ "\n-E Do not set up environment variables" \ "\n-v Verbose" \ #define tftp_trivial_usage \ "[OPTION]... HOST [PORT]" #define tftp_full_usage "\n\n" \ "Transfer a file from/to tftp server\n" \ "\nOptions:" \ "\n -l FILE Local FILE" \ "\n -r FILE Remote FILE" \ USE_FEATURE_TFTP_GET( \ "\n -g Get file" \ ) \ USE_FEATURE_TFTP_PUT( \ "\n -p Put file" \ ) \ USE_FEATURE_TFTP_BLOCKSIZE( \ "\n -b SIZE Transfer blocks of SIZE octets" \ ) #define tftpd_trivial_usage \ "[-cr] [-u USER] [DIR]" #define tftpd_full_usage "\n\n" \ "Transfer a file on tftp client's request.\n" \ "\nOptions:" \ "\n -r Prohibit upload" \ "\n -c Allow file creation via upload" \ "\n -u Access files as USER" \ #define time_trivial_usage \ "[OPTION]... COMMAND [ARGS...]" #define time_full_usage "\n\n" \ "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ "COMMAND's resource usage information is displayed.\n" \ "\nOptions:" \ "\n -v Verbose" \ #define top_trivial_usage \ "[-b] [-n COUNT] [-d SECONDS]" #define top_full_usage "\n\n" \ "Provide a view of process activity in real time.\n" \ "Read the status of all processes from /proc each SECONDS\n" \ "and show the status for however many processes will fit on the screen." \ #define touch_trivial_usage \ "[-c] FILE [FILE...]" #define touch_full_usage "\n\n" \ "Update the last-modified date on the given FILE[s]\n" \ "\nOptions:" \ "\n -c Do not create any files" \ #define touch_example_usage \ "$ ls -l /tmp/foo\n" \ "/bin/ls: /tmp/foo: No such file or directory\n" \ "$ touch /tmp/foo\n" \ "$ ls -l /tmp/foo\n" \ "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" #define tr_trivial_usage \ "[-cds] STRING1 [STRING2]" #define tr_full_usage "\n\n" \ "Translate, squeeze, and/or delete characters from\n" \ "standard input, writing to standard output\n" \ "\nOptions:" \ "\n -c Take complement of STRING1" \ "\n -d Delete input characters coded STRING1" \ "\n -s Squeeze multiple output characters of STRING2 into one character" \ #define tr_example_usage \ "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ "hello world\n" #define traceroute_trivial_usage \ "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \ " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ " [-z pausemsecs] HOST [data size]" #define traceroute_full_usage "\n\n" \ "Trace the route to HOST\n" \ "\nOptions:" \ "\n -F Set the don't fragment bit" \ "\n -I Use ICMP ECHO instead of UDP datagrams" \ "\n -l Display the ttl value of the returned packet" \ "\n -d Set SO_DEBUG options to socket" \ "\n -n Print hop addresses numerically rather than symbolically" \ "\n -r Bypass the normal routing tables and send directly to a host" \ "\n -v Verbose" \ "\n -m max_ttl Max time-to-live (max number of hops)" \ "\n -p port# Base UDP port number used in probes" \ "\n (default is 33434)" \ "\n -q nqueries Number of probes per 'ttl' (default 3)" \ "\n -s src_addr IP address to use as the source address" \ "\n -t tos Type-of-service in probe packets (default 0)" \ "\n -w wait Time in seconds to wait for a response" \ "\n (default 3 sec)" \ "\n -g Loose source route gateway (8 max)" \ #define true_trivial_usage \ "" #define true_full_usage "\n\n" \ "Return an exit code of TRUE (0)" #define true_example_usage \ "$ true\n" \ "$ echo $?\n" \ "0\n" #define tty_trivial_usage \ "" #define tty_full_usage "\n\n" \ "Print file name of standard input's terminal" \ USE_INCLUDE_SUSv2( "\n" \ "\nOptions:" \ "\n -s Print nothing, only return exit status" \ ) #define tty_example_usage \ "$ tty\n" \ "/dev/tty2\n" #define ttysize_trivial_usage \ "[w] [h]" #define ttysize_full_usage "\n\n" \ "Print dimension(s) of standard input's terminal, on error return 80x25" #define tune2fs_trivial_usage \ "[-c max-mounts-count] [-e errors-behavior] [-g group] " \ "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \ "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \ "[-r reserved-blocks-count] [-u user] [-C mount-count] " \ "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \ "[-T last-check-time] [-U UUID] device" #define tune2fs_full_usage "\n\n" \ "Adjust filesystem options on ext[23] filesystems" #define udhcpc_trivial_usage \ "[-Cfbnqtvo] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n" \ " [-p pidfile] [-r IP] [-s script] [-O dhcp-option]..." USE_FEATURE_UDHCP_PORT(" [-P N]") #define udhcpc_full_usage "\n\n" \ USE_GETOPT_LONG( \ " -V,--vendorclass=CLASSID Vendor class identifier" \ "\n -i,--interface=INTERFACE Interface to use (default eth0)" \ "\n -H,-h,--hostname=HOSTNAME Client hostname" \ "\n -c,--clientid=CLIENTID Client identifier" \ "\n -C,--clientid-none Suppress default client identifier" \ "\n -p,--pidfile=file Create pidfile" \ "\n -r,--request=IP IP address to request" \ "\n -s,--script=file Run file at DHCP events (default "CONFIG_DHCPC_DEFAULT_SCRIPT")" \ "\n -t,--retries=N Send up to N request packets" \ "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \ "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \ "\n -O,--request-option=OPT Request DHCP option OPT (cumulative)" \ "\n -o,--no-default-options Do not request any options (unless -O is also given)" \ "\n -f,--foreground Run in foreground" \ "\n -b,--background Background if lease is not immediately obtained" \ "\n -S,--syslog Log to syslog too" \ "\n -n,--now Exit with failure if lease is not immediately obtained" \ "\n -q,--quit Quit after obtaining lease" \ "\n -R,--release Release IP on quit" \ USE_FEATURE_UDHCP_PORT( \ "\n -P,--client-port N Use port N instead of default 68" \ ) \ USE_FEATURE_UDHCPC_ARPING( \ "\n -a,--arping Use arping to validate offered address" \ ) \ ) \ SKIP_GETOPT_LONG( \ " -V CLASSID Vendor class identifier" \ "\n -i INTERFACE Interface to use (default: eth0)" \ "\n -H,-h HOSTNAME Client hostname" \ "\n -c CLIENTID Client identifier" \ "\n -C Suppress default client identifier" \ "\n -p file Create pidfile" \ "\n -r IP IP address to request" \ "\n -s file Run file at DHCP events (default "CONFIG_DHCPC_DEFAULT_SCRIPT")" \ "\n -t N Send up to N request packets" \ "\n -T N Try to get a lease for N seconds (default 3)" \ "\n -A N Wait N seconds (default 20) after failure" \ "\n -O OPT Request DHCP option OPT (cumulative)" \ "\n -o Do not request any options (unless -O is also given)" \ "\n -f Run in foreground" \ "\n -b Background if lease is not immediately obtained" \ "\n -S Log to syslog too" \ "\n -n Exit with failure if lease is not immediately obtained" \ "\n -q Quit after obtaining lease" \ "\n -R Release IP on quit" \ USE_FEATURE_UDHCP_PORT( \ "\n -P N Use port N instead of default 68" \ ) \ USE_FEATURE_UDHCPC_ARPING( \ "\n -a Use arping to validate offered address" \ ) \ ) #define udhcpd_trivial_usage \ "[-fS]" USE_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \ #define udhcpd_full_usage "\n\n" \ "DHCP server\n" \ "\n -f Run in foreground" \ "\n -S Log to syslog too" \ USE_FEATURE_UDHCP_PORT( \ "\n -P N Use port N instead of default 67" \ ) #define umount_trivial_usage \ "[flags] FILESYSTEM|DIRECTORY" #define umount_full_usage "\n\n" \ "Unmount file systems\n" \ "\nOptions:" \ USE_FEATURE_UMOUNT_ALL( \ "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \ ) \ USE_FEATURE_MTAB_SUPPORT( \ "\n -n Don't erase /etc/mtab entries" \ ) \ "\n -r Try to remount devices as read-only if mount is busy" \ "\n -l Lazy umount (detach filesystem)" \ "\n -f Force umount (i.e., unreachable NFS server)" \ USE_FEATURE_MOUNT_LOOP( \ "\n -d Free loop device if it has been used" \ ) #define umount_example_usage \ "$ umount /dev/hdc1\n" #define uname_trivial_usage \ "[-amnrspv]" #define uname_full_usage "\n\n" \ "Print system information.\n" \ "\nOptions:" \ "\n -a Print all" \ "\n -m The machine (hardware) type" \ "\n -n Hostname" \ "\n -r OS release" \ "\n -s OS name (default)" \ "\n -p Processor type" \ "\n -v OS version" \ #define uname_example_usage \ "$ uname -a\n" \ "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" #define uncompress_trivial_usage \ "[-c] [-f] [name...]" #define uncompress_full_usage "\n\n" \ "Uncompress .Z file[s]\n" \ "\nOptions:" \ "\n -c Extract to stdout" \ "\n -f Overwrite an existing file" \ #define unexpand_trivial_usage \ "[-f][-a][-t NUM] [FILE|-]" #define unexpand_full_usage "\n\n" \ "Convert spaces to tabs, writing to standard output.\n" \ "\nOptions:" \ USE_FEATURE_UNEXPAND_LONG_OPTIONS( \ "\n -a,--all Convert all blanks" \ "\n -f,--first-only Convert only leading blanks" \ "\n -t,--tabs=N Tabstops every N chars" \ ) \ SKIP_FEATURE_UNEXPAND_LONG_OPTIONS( \ "\n -a Convert all blanks" \ "\n -f Convert only leading blanks" \ "\n -t N Tabstops every N chars" \ ) #define uniq_trivial_usage \ "[-fscduw]... [INPUT [OUTPUT]]" #define uniq_full_usage "\n\n" \ "Discard duplicate lines\n" \ "\nOptions:" \ "\n -c Prefix lines by the number of occurrences" \ "\n -d Only print duplicate lines" \ "\n -u Only print unique lines" \ "\n -f N Skip first N fields" \ "\n -s N Skip first N chars (after any skipped fields)" \ "\n -w N Compare N characters in line" \ #define uniq_example_usage \ "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ "a\n" \ "b\n" \ "c\n" #define unix2dos_trivial_usage \ "[option] [FILE]" #define unix2dos_full_usage "\n\n" \ "Convert FILE from unix to dos format.\n" \ "When no file is given, use stdin/stdout.\n" \ "\nOptions:" \ "\n -u dos2unix" \ "\n -d unix2dos" \ #define unzip_trivial_usage \ "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" #define unzip_full_usage "\n\n" \ "Extract files from ZIP archives\n" \ "\nOptions:" \ "\n -l List archive contents (with -q for short form)" \ "\n -n Never overwrite existing files (default)" \ "\n -o Overwrite files without prompting" \ "\n -p Send output to stdout" \ "\n -q Quiet" \ "\n -x Exclude these files" \ "\n -d Extract files into this directory" \ #define uptime_trivial_usage \ "" #define uptime_full_usage "\n\n" \ "Display the time since the last boot" #define uptime_example_usage \ "$ uptime\n" \ " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" #define usleep_trivial_usage \ "N" #define usleep_full_usage "\n\n" \ "Pause for N microseconds" #define usleep_example_usage \ "$ usleep 1000000\n" \ "[pauses for 1 second]\n" #define uudecode_trivial_usage \ "[-o outfile] [infile]" #define uudecode_full_usage "\n\n" \ "Uudecode a file\n" \ "Finds outfile name in uuencoded source unless -o is given" #define uudecode_example_usage \ "$ uudecode -o busybox busybox.uu\n" \ "$ ls -l busybox\n" \ "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" #define uuencode_trivial_usage \ "[-m] [infile] stored_filename" #define uuencode_full_usage "\n\n" \ "Uuencode a file to stdout\n" \ "\nOptions:" \ "\n -m Use base64 encoding per RFC1521" \ #define uuencode_example_usage \ "$ uuencode busybox busybox\n" \ "begin 755 busybox\n" \ "\n" \ "$ uudecode busybox busybox > busybox.uu\n" \ "$\n" #define vconfig_trivial_usage \ "COMMAND [OPTIONS]..." #define vconfig_full_usage "\n\n" \ "Create and remove virtual ethernet devices\n" \ "\nOptions:" \ "\n add [interface-name] [vlan_id]" \ "\n rem [vlan-name]" \ "\n set_flag [interface-name] [flag-num] [0 | 1]" \ "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \ "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \ "\n set_name_type [name-type]" \ #define vi_trivial_usage \ "[OPTION] [FILE]..." #define vi_full_usage "\n\n" \ "Edit FILE\n" \ "\nOptions:" \ USE_FEATURE_VI_COLON( \ "\n -c Initial command to run ($EXINIT also available)") \ USE_FEATURE_VI_READONLY( \ "\n -R Read-only - do not write to the file") \ "\n -H Short help regarding available features" \ #define vlock_trivial_usage \ "[OPTIONS]" #define vlock_full_usage "\n\n" \ "Lock a virtual terminal. A password is required to unlock.\n" \ "\nOptions:" \ "\n -a Lock all VTs" \ #define watch_trivial_usage \ "[-n seconds] [-t] COMMAND..." #define watch_full_usage "\n\n" \ "Execute a program periodically\n" \ "\nOptions:" \ "\n -n Loop period in seconds (default 2)" \ "\n -t Don't print header" \ #define watch_example_usage \ "$ watch date\n" \ "Mon Dec 17 10:31:40 GMT 2000\n" \ "Mon Dec 17 10:31:42 GMT 2000\n" \ "Mon Dec 17 10:31:44 GMT 2000" #define watchdog_trivial_usage \ "[-t N[ms]] [-F] DEV" #define watchdog_full_usage "\n\n" \ "Periodically write to watchdog device DEV\n" \ "\nOptions:" \ "\n -t N Timer period (default 30)" \ "\n -F Run in foreground" \ "\n" \ "\nUse -t 500ms to specify period in milliseconds" \ #define wc_trivial_usage \ "[OPTION]... [FILE]..." #define wc_full_usage "\n\n" \ "Print line, word, and byte counts for each FILE, and a total line if\n" \ "more than one FILE is specified. With no FILE, read standard input.\n" \ "\nOptions:" \ "\n -c Print the byte counts" \ "\n -l Print the newline counts" \ "\n -L Print the length of the longest line" \ "\n -w Print the word counts" \ #define wc_example_usage \ "$ wc /etc/passwd\n" \ " 31 46 1365 /etc/passwd\n" #define wget_trivial_usage \ USE_GETOPT_LONG( \ "[-c|--continue] [-s|--spider] [-q|--quiet] [-O|--output-document file]\n" \ " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \ " [-U|--user-agent agent] url" \ ) \ SKIP_GETOPT_LONG( \ "[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \ ) #define wget_full_usage "\n\n" \ "Retrieve files via HTTP or FTP\n" \ "\nOptions:" \ "\n -s Spider mode - only check file existence" \ "\n -c Continue retrieval of aborted transfer" \ "\n -q Quiet" \ "\n -P Set directory prefix to DIR" \ "\n -O Save to filename ('-' for stdout)" \ "\n -U Adjust 'User-Agent' field" \ "\n -Y Use proxy ('on' or 'off')" \ #define which_trivial_usage \ "[COMMAND...]" #define which_full_usage "\n\n" \ "Locate a COMMAND" #define which_example_usage \ "$ which login\n" \ "/bin/login\n" #define who_trivial_usage \ "[-a]" #define who_full_usage "\n\n" \ "Show who is logged on\n" \ "\nOptions:" \ "\n -a show all" \ #define whoami_trivial_usage \ "" #define whoami_full_usage "\n\n" \ "Print the user name associated with the current effective user id" #define xargs_trivial_usage \ "[OPTIONS] [COMMAND] [ARGS...]" #define xargs_full_usage "\n\n" \ "Execute COMMAND on every item given by standard input\n" \ "\nOptions:" \ USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ "\n -p Prompt the user about whether to run each command") \ "\n -r Do not run command for empty read lines" \ USE_FEATURE_XARGS_SUPPORT_TERMOPT( \ "\n -x Exit if the size is exceeded") \ USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \ "\n -0 Input filenames are terminated by a null character") \ "\n -t Print the command line on stderr before executing it" \ #define xargs_example_usage \ "$ ls | xargs gzip\n" \ "$ find . -name '*.c' -print | xargs rm\n" #define yes_trivial_usage \ "[OPTION]... [STRING]..." #define yes_full_usage "\n\n" \ "Repeatedly output a line with all specified STRING(s), or 'y'" #define zcat_trivial_usage \ "FILE" #define zcat_full_usage "\n\n" \ "Uncompress to stdout" #define zcip_trivial_usage \ "[OPTIONS] ifname script" #define zcip_full_usage "\n\n" \ "Manage a ZeroConf IPv4 link-local address\n" \ "\nOptions:" \ "\n -f Run in foreground" \ "\n -q Quit after address (no daemon)" \ "\n -r 169.254.x.x Request this address first" \ "\n -v Verbose" \ #endif /* __BB_USAGE_H__ */