Bumper typo cleanup.

Inspired by some of the small patches that have gone by recently.
Limited to only things found in `generated/help.h`, plus a wider cleanup
for the more common "milisecond" typo.

12 files changed, 19 insertions, 19 deletions

diff --git a/toys/net/netcat.c b/toys/net/netcat.c
index e98f12b2..673d5d19 100644
--- a/toys/net/netcat.c
+++ b/toys/net/netcat.c
@@ -74,7 +74,7 @@ void netcat_main(void)
   int family = AF_UNSPEC, type = SOCK_STREAM;
   pid_t child;
 
-  // Addjust idle and quit_delay to miliseconds or -1 for no timeout
+  // Addjust idle and quit_delay to ms or -1 for no timeout
   TT.W = TT.W ? TT.W*1000 : -1;
   TT.q = TT.q ? TT.q*1000 : -1;
 
diff --git a/toys/other/losetup.c b/toys/other/losetup.c
index f4ab752c..d77a9500 100644
--- a/toys/other/losetup.c
+++ b/toys/other/losetup.c
@@ -26,7 +26,7 @@ config LOSETUP
 
     new:
     -s	Show device name (alias --show)
-    -o	Start assocation at OFFSET into FILE
+    -o	Start association at OFFSET into FILE
     -r	Read only
     -S	Limit SIZE of loopback association (alias --sizelimit)
 */
diff --git a/toys/other/taskset.c b/toys/other/taskset.c
index 89fd5283..6a9de77f 100644
--- a/toys/other/taskset.c
+++ b/toys/other/taskset.c
@@ -22,7 +22,7 @@ config TASKSET
     usage: taskset [-ap] [mask] [PID | cmd [args...]]
 
     Launch a new task which may only run on certain processors, or change
-    the processor affinity of an exisitng PID.
+    the processor affinity of an existing PID.
 
     Mask is a hex string where each bit represents a processor the process
     is allowed to run on. PID without a mask displays existing affinity.
diff --git a/toys/pending/dhcp.c b/toys/pending/dhcp.c
index d1f8e801..2dd392dc 100644
--- a/toys/pending/dhcp.c
+++ b/toys/pending/dhcp.c
@@ -13,7 +13,7 @@ config DHCP
    usage: dhcp [-fbnqvoCRB] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]
                [-H HOSTNAME] [-V VENDOR] [-x OPT:VAL] [-O OPT]
 
-        Configure network dynamicaly using DHCP.
+        Configure network dynamically using DHCP.
 
       -i Interface to use (default eth0)
       -p Create pidfile
diff --git a/toys/pending/dhcp6.c b/toys/pending/dhcp6.c
index 18aee8a3..c69c4aed 100644
--- a/toys/pending/dhcp6.c
+++ b/toys/pending/dhcp6.c
@@ -11,11 +11,11 @@ config DHCP6
   help
   usage: dhcp6 [-fbnqvR] [-i IFACE] [-r IP] [-s PROG] [-p PIDFILE]
 
-        Configure network dynamicaly using DHCP.
+        Configure network dynamically using DHCP.
 
       -i Interface to use (default eth0)
       -p Create pidfile
-      -s Run PROG at DHCP events 
+      -s Run PROG at DHCP events
       -t Send up to N Solicit packets
       -T Pause between packets (default 3 seconds)
       -A Wait N seconds after failure (default 20)
diff --git a/toys/pending/fsck.c b/toys/pending/fsck.c
index ac00bff7..ea7c59cd 100644
--- a/toys/pending/fsck.c
+++ b/toys/pending/fsck.c
@@ -9,8 +9,8 @@ config FSCK
   bool "fsck"
   default n
   help
-    usage: fsck [-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]... 
-    
+    usage: fsck [-ANPRTV] [-C FD] [-t FSTYPE] [FS_OPTS] [BLOCKDEV]...
+
     Check and repair filesystems
 
     -A      Walk /etc/fstab and check all filesystems
@@ -19,7 +19,7 @@ config FSCK
     -R      With -A, skip the root filesystem
     -T      Don't show title on startup
     -V      Verbose
-    -C n    Write status information to specified filedescriptor
+    -C n    Write status information to specified file descriptor
     -t TYPE List of filesystem types to check
 
 */
diff --git a/toys/pending/host.c b/toys/pending/host.c
index 5e3edd87..dea97b13 100644
--- a/toys/pending/host.c
+++ b/toys/pending/host.c
@@ -13,7 +13,7 @@ config HOST
     usage: host [-av] [-t TYPE] NAME [SERVER]
 
     Perform DNS lookup on NAME, which can be a domain name to lookup,
-    or an ipv4 dotted or ipv6 colon seprated address to reverse lookup.
+    or an IPv4 dotted or IPv6 colon-seperated address to reverse lookup.
     SERVER (if present) is the DNS server to use.
 
     -a	no idea
diff --git a/toys/pending/more.c b/toys/pending/more.c
index fa96d40e..79bb7bf9 100644
--- a/toys/pending/more.c
+++ b/toys/pending/more.c
@@ -1,4 +1,4 @@
-/* more.c - View FILE (or stdin) one screenful at a time.
+/* more.c - View FILE (or stdin) one screenfull at a time.
  *
  * Copyright 2013 Bilal Qureshi <bilal.jmi@gmail.com>
  *
@@ -12,7 +12,7 @@ config MORE
   help
     usage: more [FILE...]
 
-    View FILE(s) (or stdin) one screenful at a time.
+    View FILE(s) (or stdin) one screenfull at a time.
 */
 
 #define FOR_more
diff --git a/toys/pending/traceroute.c b/toys/pending/traceroute.c
index 9a818eb4..d5ead9e2 100644
--- a/toys/pending/traceroute.c
+++ b/toys/pending/traceroute.c
@@ -15,13 +15,13 @@ config TRACEROUTE
   help
     usage: traceroute [-46FUIldnvr] [-f 1ST_TTL] [-m MAXTTL] [-p PORT] [-q PROBES]
     [-s SRC_IP] [-t TOS] [-w WAIT_SEC] [-g GATEWAY] [-i IFACE] [-z PAUSE_MSEC] HOST [BYTES]
-    
-    traceroute6 [-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES][-s SRC_IP] [-t TOS] [-w WAIT_SEC] 
+
+    traceroute6 [-dnrv] [-m MAXTTL] [-p PORT] [-q PROBES][-s SRC_IP] [-t TOS] [-w WAIT_SEC]
       [-i IFACE] HOST [BYTES]
 
     Trace the route to HOST
 
-    -4,-6 Force IP or IPv6 name resolution 
+    -4,-6 Force IP or IPv6 name resolution
     -F    Set the don't fragment bit (supports IPV4 only)
     -U    Use UDP datagrams instead of ICMP ECHO (supports IPV4 only)
     -I    Use ICMP ECHO instead of UDP datagrams (supports IPV4 only)
@@ -37,7 +37,7 @@ config TRACEROUTE
     -t    Type-of-service in probe packets (default 0)(RANGE 0 to 255)
     -w    Time in seconds to wait for a response (default 3)(RANGE 0 to 86400)
     -g    Loose source route gateway (8 max) (supports IPV4 only)
-    -z    Pause Time in milisec (default 0)(RANGE 0 to 86400) (supports IPV4 only)
+    -z    Pause Time in ms (default 0)(RANGE 0 to 86400) (supports IPV4 only)
     -f    Start from the 1ST_TTL hop (instead from 1)(RANGE 1 to 255) (supports IPV4 only)
     -i    Specify a network interface to operate with
 */
diff --git a/toys/posix/expand.c b/toys/posix/expand.c
index 301d361e..f1fd8d33 100644
--- a/toys/posix/expand.c
+++ b/toys/posix/expand.c
@@ -18,7 +18,7 @@ config EXPAND
 
     Specify tab stops, either a single number instead of the default 8,
     or a comma separated list of increasing numbers representing tabstop
-    positions (absolute, not increments) with each additional tab beyound
+    positions (absolute, not increments) with each additional tab beyond
     that becoming one space.
 */
 
diff --git a/toys/posix/od.c b/toys/posix/od.c
index c9c5c486..f45c8654 100644
--- a/toys/posix/od.c
+++ b/toys/posix/od.c
@@ -13,7 +13,7 @@ config OD
   help
     usage: od [-bcdosxv] [-j #] [-N #] [-w #] [-A doxn] [-t acdfoux[#]]
 
-    -A	Address base (decimal, octal, hexdecimal, none)
+    -A	Address base (decimal, octal, hexadecimal, none)
     -j	Skip this many bytes of input
     -N	Stop dumping after this many bytes
     -t	Output type a(scii) c(har) d(ecimal) f(loat) o(ctal) u(nsigned) (he)x
diff --git a/toys/posix/sed.c b/toys/posix/sed.c
index 5e516249..0c31d2af 100644
--- a/toys/posix/sed.c
+++ b/toys/posix/sed.c
@@ -56,7 +56,7 @@ config SED
     Backslashes may be used to escape the delimiter if it occurs in the
     regex, and for the usual printf escapes (\abcefnrtv and octal, hex,
     and unicode). An empty regex repeats the previous one. ADDRESS regexes
-    (above) require the first delimeter to be escaped with a backslash when
+    (above) require the first delimiter to be escaped with a backslash when
     it isn't a forward slash (to distinguish it from the COMMANDs below).
 
     Sed mostly operates on individual lines one at a time. It reads each line,