diff options
Diffstat (limited to 'lib/bunzip.c')
| -rw-r--r-- | lib/bunzip.c | 1039 |
1 files changed, 513 insertions, 526 deletions
diff --git a/lib/bunzip.c b/lib/bunzip.c index f860aa64..2836d38c 100644 --- a/lib/bunzip.c +++ b/lib/bunzip.c @@ -1,14 +1,13 @@ -/* vi: set sw=4 ts=4: */ /* micro-bunzip, a small, simple bzip2 decompression implementation. - - Copyright 2003, 2006 by Rob Landley (rob@landley.net). - - Based on a close reading (but not the actual code) of the original bzip2 - decompression code by Julian R Seward (jseward@acm.org), which also - acknowledges contributions by Mike Burrows, David Wheeler, Peter Fenwick, - Alistair Moffat, Radford Neal, Ian H. Witten, Robert Sedgewick, and - Jon L. Bentley. -*/ + * + * Copyright 2003, 2006 by Rob Landley (rob@landley.net). + * + * Based on a close reading (but not the actual code) of the original bzip2 + * decompression code by Julian R Seward (jseward@acm.org), which also + * acknowledges contributions by Mike Burrows, David Wheeler, Peter Fenwick, + * Alistair Moffat, Radford Neal, Ian H. Witten, Robert Sedgewick, and + * Jon L. Bentley. + */ #include "toys.h" @@ -32,93 +31,92 @@ #define RETVAL_OBSOLETE_INPUT (-3) char *bunzip_errors[]={ - NULL, - "Not bzip data", - "Data error", - "Obsolete (pre 0.9.5) bzip format not supported." + NULL, + "Not bzip data", + "Data error", + "Obsolete (pre 0.9.5) bzip format not supported." }; // This is what we know about each huffman coding group struct group_data { - int limit[MAX_HUFCODE_BITS+1], base[MAX_HUFCODE_BITS], permute[MAX_SYMBOLS]; - char minLen, maxLen; + int limit[MAX_HUFCODE_BITS+1], base[MAX_HUFCODE_BITS], permute[MAX_SYMBOLS]; + char minLen, maxLen; }; // Data for burrows wheeler transform struct bwdata { - unsigned int origPtr; - int byteCount[256]; - // State saved when interrupting output - int writePos, writeRun, writeCount, writeCurrent; - unsigned int dataCRC, headerCRC; - unsigned int *dbuf; + unsigned int origPtr; + int byteCount[256]; + // State saved when interrupting output + int writePos, writeRun, writeCount, writeCurrent; + unsigned int dataCRC, headerCRC; + unsigned int *dbuf; }; // Structure holding all the housekeeping data, including IO buffers and // memory that persists between calls to bunzip struct bunzip_data { + // Input stream, input buffer, input bit buffer + int in_fd, inbufCount, inbufPos; + char *inbuf; + unsigned int inbufBitCount, inbufBits; - // Input stream, input buffer, input bit buffer - int in_fd, inbufCount, inbufPos; - char *inbuf; - unsigned int inbufBitCount, inbufBits; - - // Output buffer - char outbuf[IOBUF_SIZE]; - int outbufPos; + // Output buffer + char outbuf[IOBUF_SIZE]; + int outbufPos; - unsigned int totalCRC; + unsigned int totalCRC; - // First pass decompression data (Huffman and MTF decoding) - char selectors[32768]; // nSelectors=15 bits - struct group_data groups[MAX_GROUPS]; // huffman coding tables - int symTotal, groupCount, nSelectors; - unsigned char symToByte[256], mtfSymbol[256]; + // First pass decompression data (Huffman and MTF decoding) + char selectors[32768]; // nSelectors=15 bits + struct group_data groups[MAX_GROUPS]; // huffman coding tables + int symTotal, groupCount, nSelectors; + unsigned char symToByte[256], mtfSymbol[256]; - // The CRC values stored in the block header and calculated from the data - unsigned int crc32Table[256]; + // The CRC values stored in the block header and calculated from the data + unsigned int crc32Table[256]; - // Second pass decompression data (burrows-wheeler transform) - unsigned int dbufSize; - struct bwdata bwdata[THREADS]; + // Second pass decompression data (burrows-wheeler transform) + unsigned int dbufSize; + struct bwdata bwdata[THREADS]; }; // Return the next nnn bits of input. All reads from the compressed input // are done through this function. All reads are big endian. static unsigned int get_bits(struct bunzip_data *bd, char bits_wanted) { - unsigned int bits = 0; - - // If we need to get more data from the byte buffer, do so. (Loop getting - // one byte at a time to enforce endianness and avoid unaligned access.) - while (bd->inbufBitCount < bits_wanted) { - - // If we need to read more data from file into byte buffer, do so - if (bd->inbufPos == bd->inbufCount) { - if (0 >= (bd->inbufCount = read(bd->in_fd, bd->inbuf, IOBUF_SIZE))) - error_exit("Unexpected input EOF"); - bd->inbufPos = 0; - } - - // Avoid 32-bit overflow (dump bit buffer to top of output) - if (bd->inbufBitCount>=24) { - bits = bd->inbufBits&((1<<bd->inbufBitCount)-1); - bits_wanted -= bd->inbufBitCount; - bits <<= bits_wanted; - bd->inbufBitCount = 0; - } - - // Grab next 8 bits of input from buffer. - bd->inbufBits = (bd->inbufBits<<8) | bd->inbuf[bd->inbufPos++]; - bd->inbufBitCount += 8; - } - - // Calculate result - bd->inbufBitCount -= bits_wanted; - bits |= (bd->inbufBits>>bd->inbufBitCount) & ((1<<bits_wanted)-1); - - return bits; + unsigned int bits = 0; + + // If we need to get more data from the byte buffer, do so. (Loop getting + // one byte at a time to enforce endianness and avoid unaligned access.) + while (bd->inbufBitCount < bits_wanted) { + + // If we need to read more data from file into byte buffer, do so + if (bd->inbufPos == bd->inbufCount) { + if (0 >= (bd->inbufCount = read(bd->in_fd, bd->inbuf, IOBUF_SIZE))) + error_exit("Unexpected input EOF"); + bd->inbufPos = 0; + } + + // Avoid 32-bit overflow (dump bit buffer to top of output) + if (bd->inbufBitCount>=24) { + bits = bd->inbufBits&((1<<bd->inbufBitCount)-1); + bits_wanted -= bd->inbufBitCount; + bits <<= bits_wanted; + bd->inbufBitCount = 0; + } + + // Grab next 8 bits of input from buffer. + bd->inbufBits = (bd->inbufBits<<8) | bd->inbuf[bd->inbufPos++]; + bd->inbufBitCount += 8; + } + + // Calculate result + bd->inbufBitCount -= bits_wanted; + bits |= (bd->inbufBits>>bd->inbufBitCount) & ((1<<bits_wanted)-1); + + return bits; } /* Read block header at start of a new compressed data block. Consists of: @@ -139,156 +137,153 @@ static unsigned int get_bits(struct bunzip_data *bd, char bits_wanted) static int read_block_header(struct bunzip_data *bd, struct bwdata *bw) { - struct group_data *hufGroup; - int hh, ii, jj, kk, symCount, *base, *limit; - unsigned char uc; - - // Read in header signature and CRC (which is stored big endian) - ii = get_bits(bd, 24); - jj = get_bits(bd, 24); - bw->headerCRC = get_bits(bd,32); - - // Is this the EOF block with CRC for whole file? (Constant is "e") - if (ii==0x177245 && jj==0x385090) return RETVAL_LAST_BLOCK; - - // Is this a valid data block? (Constant is "pi".) - if (ii!=0x314159 || jj!=0x265359) return RETVAL_NOT_BZIP_DATA; - - // We can add support for blockRandomised if anybody complains. - if (get_bits(bd,1)) return RETVAL_OBSOLETE_INPUT; - if ((bw->origPtr = get_bits(bd,24)) > bd->dbufSize) - return RETVAL_DATA_ERROR; - - // mapping table: if some byte values are never used (encoding things - // like ascii text), the compression code removes the gaps to have fewer - // symbols to deal with, and writes a sparse bitfield indicating which - // values were present. We make a translation table to convert the symbols - // back to the corresponding bytes. - hh = get_bits(bd, 16); - bd->symTotal = 0; - for (ii=0; ii<16; ii++) { - if (hh & (1 << (15 - ii))) { - kk = get_bits(bd, 16); - for (jj=0; jj<16; jj++) - if (kk & (1 << (15 - jj))) - bd->symToByte[bd->symTotal++] = (16 * ii) + jj; - } - } - - // How many different huffman coding groups does this block use? - bd->groupCount = get_bits(bd,3); - if (bd->groupCount<2 || bd->groupCount>MAX_GROUPS) return RETVAL_DATA_ERROR; - - // nSelectors: Every GROUP_SIZE many symbols we switch huffman coding - // tables. Each group has a selector, which is an index into the huffman - // coding table arrays. - // - // Read in the group selector array, which is stored as MTF encoded - // bit runs. (MTF = Move To Front. Every time a symbol occurs it's moved - // to the front of the table, so it has a shorter encoding next time.) - if (!(bd->nSelectors = get_bits(bd, 15))) return RETVAL_DATA_ERROR; - for (ii=0; ii<bd->groupCount; ii++) bd->mtfSymbol[ii] = ii; - for (ii=0; ii<bd->nSelectors; ii++) { - - // Get next value - for(jj=0;get_bits(bd,1);jj++) - if (jj>=bd->groupCount) return RETVAL_DATA_ERROR; - - // Decode MTF to get the next selector, and move it to the front. - uc = bd->mtfSymbol[jj]; - memmove(bd->mtfSymbol+1, bd->mtfSymbol, jj); - bd->mtfSymbol[0] = bd->selectors[ii] = uc; - } - - // Read the huffman coding tables for each group, which code for symTotal - // literal symbols, plus two run symbols (RUNA, RUNB) - symCount = bd->symTotal+2; - for (jj=0; jj<bd->groupCount; jj++) { - unsigned char length[MAX_SYMBOLS]; - unsigned temp[MAX_HUFCODE_BITS+1]; - int minLen, maxLen, pp; - - // Read lengths - hh = get_bits(bd, 5); - for (ii = 0; ii < symCount; ii++) { - for(;;) { - // !hh || hh > MAX_HUFCODE_BITS in one test. - if (MAX_HUFCODE_BITS-1 < (unsigned)hh-1) - return RETVAL_DATA_ERROR; - // Grab 2 bits instead of 1 (slightly smaller/faster). Stop if - // first bit is 0, otherwise second bit says whether to - // increment or decrement. - kk = get_bits(bd, 2); - if (kk & 2) hh += 1 - ((kk&1)<<1); - else { - bd->inbufBitCount++; - break; - } - } - length[ii] = hh; - } - - // Find largest and smallest lengths in this group - minLen = maxLen = length[0]; - for (ii = 1; ii < symCount; ii++) { - if(length[ii] > maxLen) maxLen = length[ii]; - else if(length[ii] < minLen) minLen = length[ii]; - } - - /* Calculate permute[], base[], and limit[] tables from length[]. - * - * permute[] is the lookup table for converting huffman coded symbols - * into decoded symbols. It contains symbol values sorted by length. - * - * base[] is the amount to subtract from the value of a huffman symbol - * of a given length when using permute[]. - * - * limit[] indicates the largest numerical value a symbol with a given - * number of bits can have. It lets us know when to stop reading. - * - * To use these, keep reading bits until value <= limit[bitcount] or - * you've read over 20 bits (error). Then the decoded symbol - * equals permute[hufcode_value - base[hufcode_bitcount]]. - */ - hufGroup = bd->groups+jj; - hufGroup->minLen = minLen; - hufGroup->maxLen = maxLen; - - // Note that minLen can't be smaller than 1, so we adjust the base - // and limit array pointers so we're not always wasting the first - // entry. We do this again when using them (during symbol decoding). - base = hufGroup->base-1; - limit = hufGroup->limit-1; - - // zero temp[] and limit[], and calculate permute[] - pp = 0; - for (ii = minLen; ii <= maxLen; ii++) { - temp[ii] = limit[ii] = 0; - for (hh = 0; hh < symCount; hh++) - if (length[hh] == ii) - hufGroup->permute[pp++] = hh; - } - - // Count symbols coded for at each bit length - for (ii = 0; ii < symCount; ii++) temp[length[ii]]++; - - /* Calculate limit[] (the largest symbol-coding value at each bit - * length, which is (previous limit<<1)+symbols at this level), and - * base[] (number of symbols to ignore at each bit length, which is - * limit minus the cumulative count of symbols coded for already). */ - pp = hh = 0; - for (ii = minLen; ii < maxLen; ii++) { - pp += temp[ii]; - limit[ii] = pp-1; - pp <<= 1; - base[ii+1] = pp-(hh+=temp[ii]); - } - limit[maxLen] = pp+temp[maxLen]-1; - limit[maxLen+1] = INT_MAX; - base[minLen] = 0; - } - - return 0; + struct group_data *hufGroup; + int hh, ii, jj, kk, symCount, *base, *limit; + unsigned char uc; + + // Read in header signature and CRC (which is stored big endian) + ii = get_bits(bd, 24); + jj = get_bits(bd, 24); + bw->headerCRC = get_bits(bd,32); + + // Is this the EOF block with CRC for whole file? (Constant is "e") + if (ii==0x177245 && jj==0x385090) return RETVAL_LAST_BLOCK; + + // Is this a valid data block? (Constant is "pi".) + if (ii!=0x314159 || jj!=0x265359) return RETVAL_NOT_BZIP_DATA; + + // We can add support for blockRandomised if anybody complains. + if (get_bits(bd,1)) return RETVAL_OBSOLETE_INPUT; + if ((bw->origPtr = get_bits(bd,24)) > bd->dbufSize) return RETVAL_DATA_ERROR; + + // mapping table: if some byte values are never used (encoding things + // like ascii text), the compression code removes the gaps to have fewer + // symbols to deal with, and writes a sparse bitfield indicating which + // values were present. We make a translation table to convert the symbols + // back to the corresponding bytes. + hh = get_bits(bd, 16); + bd->symTotal = 0; + for (ii=0; ii<16; ii++) { + if (hh & (1 << (15 - ii))) { + kk = get_bits(bd, 16); + for (jj=0; jj<16; jj++) + if (kk & (1 << (15 - jj))) + bd->symToByte[bd->symTotal++] = (16 * ii) + jj; + } + } + + // How many different huffman coding groups does this block use? + bd->groupCount = get_bits(bd,3); + if (bd->groupCount<2 || bd->groupCount>MAX_GROUPS) return RETVAL_DATA_ERROR; + + // nSelectors: Every GROUP_SIZE many symbols we switch huffman coding + // tables. Each group has a selector, which is an index into the huffman + // coding table arrays. + // + // Read in the group selector array, which is stored as MTF encoded + // bit runs. (MTF = Move To Front. Every time a symbol occurs it's moved + // to the front of the table, so it has a shorter encoding next time.) + if (!(bd->nSelectors = get_bits(bd, 15))) return RETVAL_DATA_ERROR; + for (ii=0; ii<bd->groupCount; ii++) bd->mtfSymbol[ii] = ii; + for (ii=0; ii<bd->nSelectors; ii++) { + + // Get next value + for(jj=0;get_bits(bd,1);jj++) + if (jj>=bd->groupCount) return RETVAL_DATA_ERROR; + + // Decode MTF to get the next selector, and move it to the front. + uc = bd->mtfSymbol[jj]; + memmove(bd->mtfSymbol+1, bd->mtfSymbol, jj); + bd->mtfSymbol[0] = bd->selectors[ii] = uc; + } + + // Read the huffman coding tables for each group, which code for symTotal + // literal symbols, plus two run symbols (RUNA, RUNB) + symCount = bd->symTotal+2; + for (jj=0; jj<bd->groupCount; jj++) { + unsigned char length[MAX_SYMBOLS]; + unsigned temp[MAX_HUFCODE_BITS+1]; + int minLen, maxLen, pp; + + // Read lengths + hh = get_bits(bd, 5); + for (ii = 0; ii < symCount; ii++) { + for(;;) { + // !hh || hh > MAX_HUFCODE_BITS in one test. + if (MAX_HUFCODE_BITS-1 < (unsigned)hh-1) return RETVAL_DATA_ERROR; + // Grab 2 bits instead of 1 (slightly smaller/faster). Stop if + // first bit is 0, otherwise second bit says whether to + // increment or decrement. + kk = get_bits(bd, 2); + if (kk & 2) hh += 1 - ((kk&1)<<1); + else { + bd->inbufBitCount++; + break; + } + } + length[ii] = hh; + } + + // Find largest and smallest lengths in this group + minLen = maxLen = length[0]; + for (ii = 1; ii < symCount; ii++) { + if(length[ii] > maxLen) maxLen = length[ii]; + else if(length[ii] < minLen) minLen = length[ii]; + } + + /* Calculate permute[], base[], and limit[] tables from length[]. + * + * permute[] is the lookup table for converting huffman coded symbols + * into decoded symbols. It contains symbol values sorted by length. + * + * base[] is the amount to subtract from the value of a huffman symbol + * of a given length when using permute[]. + * + * limit[] indicates the largest numerical value a symbol with a given + * number of bits can have. It lets us know when to stop reading. + * + * To use these, keep reading bits until value <= limit[bitcount] or + * you've read over 20 bits (error). Then the decoded symbol + * equals permute[hufcode_value - base[hufcode_bitcount]]. + */ + hufGroup = bd->groups+jj; + hufGroup->minLen = minLen; + hufGroup->maxLen = maxLen; + + // Note that minLen can't be smaller than 1, so we adjust the base + // and limit array pointers so we're not always wasting the first + // entry. We do this again when using them (during symbol decoding). + base = hufGroup->base-1; + limit = hufGroup->limit-1; + + // zero temp[] and limit[], and calculate permute[] + pp = 0; + for (ii = minLen; ii <= maxLen; ii++) { + temp[ii] = limit[ii] = 0; + for (hh = 0; hh < symCount; hh++) + if (length[hh] == ii) hufGroup->permute[pp++] = hh; + } + + // Count symbols coded for at each bit length + for (ii = 0; ii < symCount; ii++) temp[length[ii]]++; + + /* Calculate limit[] (the largest symbol-coding value at each bit + * length, which is (previous limit<<1)+symbols at this level), and + * base[] (number of symbols to ignore at each bit length, which is + * limit minus the cumulative count of symbols coded for already). */ + pp = hh = 0; + for (ii = minLen; ii < maxLen; ii++) { + pp += temp[ii]; + limit[ii] = pp-1; + pp <<= 1; + base[ii+1] = pp-(hh+=temp[ii]); + } + limit[maxLen] = pp+temp[maxLen]-1; + limit[maxLen+1] = INT_MAX; + base[minLen] = 0; + } + + return 0; } /* First pass, read block's symbols into dbuf[dbufCount]. @@ -300,191 +295,188 @@ static int read_block_header(struct bunzip_data *bd, struct bwdata *bw) static int read_huffman_data(struct bunzip_data *bd, struct bwdata *bw) { - struct group_data *hufGroup; - int hh, ii, jj, kk, runPos, dbufCount, symCount, selector, nextSym, - *byteCount, *base, *limit; - unsigned int *dbuf = bw->dbuf; - unsigned char uc; - - // We've finished reading and digesting the block header. Now read this - // block's huffman coded symbols from the file and undo the huffman coding - // and run length encoding, saving the result into dbuf[dbufCount++] = uc - - // Initialize symbol occurrence counters and symbol mtf table - byteCount = bw->byteCount; - for(ii=0; ii<256; ii++) { - byteCount[ii] = 0; - bd->mtfSymbol[ii] = ii; - } - - // Loop through compressed symbols. This is the first "tight inner loop" - // that needs to be micro-optimized for speed. (This one fills out dbuf[] - // linearly, staying in cache more, so isn't as limited by DRAM access.) - runPos = dbufCount = symCount = selector = 0; - // Some unnecessary initializations to shut gcc up. - base = limit = 0; - hufGroup = 0; - hh = 0; - - for (;;) { - - // Have we reached the end of this huffman group? - if (!(symCount--)) { - // Determine which huffman coding group to use. - symCount = GROUP_SIZE-1; - if (selector >= bd->nSelectors) return RETVAL_DATA_ERROR; - hufGroup = bd->groups + bd->selectors[selector++]; - base = hufGroup->base-1; - limit = hufGroup->limit-1; - } - - // Read next huffman-coded symbol (into jj). - ii = hufGroup->minLen; - jj = get_bits(bd, ii); - while (jj > limit[ii]) { - // if (ii > hufGroup->maxLen) return RETVAL_DATA_ERROR; - ii++; - - // Unroll get_bits() to avoid a function call when the data's in - // the buffer already. - kk = bd->inbufBitCount - ? (bd->inbufBits >> --(bd->inbufBitCount)) & 1 - : get_bits(bd, 1); - jj = (jj << 1) | kk; - } - // Huffman decode jj into nextSym (with bounds checking) - jj-=base[ii]; - - if (ii > hufGroup->maxLen || (unsigned)jj >= MAX_SYMBOLS) - return RETVAL_DATA_ERROR; - nextSym = hufGroup->permute[jj]; - - // If this is a repeated run, loop collecting data - if ((unsigned)nextSym <= SYMBOL_RUNB) { - - // If this is the start of a new run, zero out counter - if(!runPos) { - runPos = 1; - hh = 0; - } - - /* Neat trick that saves 1 symbol: instead of or-ing 0 or 1 at - each bit position, add 1 or 2 instead. For example, - 1011 is 1<<0 + 1<<1 + 2<<2. 1010 is 2<<0 + 2<<1 + 1<<2. - You can make any bit pattern that way using 1 less symbol than - the basic or 0/1 method (except all bits 0, which would use no - symbols, but a run of length 0 doesn't mean anything in this - context). Thus space is saved. */ - hh += (runPos << nextSym); // +runPos if RUNA; +2*runPos if RUNB - runPos <<= 1; - continue; - } - - /* When we hit the first non-run symbol after a run, we now know - how many times to repeat the last literal, so append that many - copies to our buffer of decoded symbols (dbuf) now. (The last - literal used is the one at the head of the mtfSymbol array.) */ - if (runPos) { - runPos = 0; - if (dbufCount+hh >= bd->dbufSize) return RETVAL_DATA_ERROR; - - uc = bd->symToByte[bd->mtfSymbol[0]]; - byteCount[uc] += hh; - while (hh--) dbuf[dbufCount++] = uc; - } - - // Is this the terminating symbol? - if (nextSym>bd->symTotal) break; - - /* At this point, the symbol we just decoded indicates a new literal - character. Subtract one to get the position in the MTF array - at which this literal is currently to be found. (Note that the - result can't be -1 or 0, because 0 and 1 are RUNA and RUNB. - Another instance of the first symbol in the mtf array, position 0, - would have been handled as part of a run.) */ - if (dbufCount>=bd->dbufSize) return RETVAL_DATA_ERROR; - ii = nextSym - 1; - uc = bd->mtfSymbol[ii]; - // On my laptop, unrolling this memmove() into a loop shaves 3.5% off - // the total running time. - while(ii--) bd->mtfSymbol[ii+1] = bd->mtfSymbol[ii]; - bd->mtfSymbol[0] = uc; - uc = bd->symToByte[uc]; - - // We have our literal byte. Save it into dbuf. - byteCount[uc]++; - dbuf[dbufCount++] = (unsigned int)uc; - } - - // Now we know what dbufCount is, do a better sanity check on origPtr. - if (bw->origPtr >= (bw->writeCount = dbufCount)) return RETVAL_DATA_ERROR; - - return 0; + struct group_data *hufGroup; + int hh, ii, jj, kk, runPos, dbufCount, symCount, selector, nextSym, + *byteCount, *base, *limit; + unsigned int *dbuf = bw->dbuf; + unsigned char uc; + + // We've finished reading and digesting the block header. Now read this + // block's huffman coded symbols from the file and undo the huffman coding + // and run length encoding, saving the result into dbuf[dbufCount++] = uc + + // Initialize symbol occurrence counters and symbol mtf table + byteCount = bw->byteCount; + for(ii=0; ii<256; ii++) { + byteCount[ii] = 0; + bd->mtfSymbol[ii] = ii; + } + + // Loop through compressed symbols. This is the first "tight inner loop" + // that needs to be micro-optimized for speed. (This one fills out dbuf[] + // linearly, staying in cache more, so isn't as limited by DRAM access.) + runPos = dbufCount = symCount = selector = 0; + // Some unnecessary initializations to shut gcc up. + base = limit = 0; + hufGroup = 0; + hh = 0; + + for (;;) { + // Have we reached the end of this huffman group? + if (!(symCount--)) { + // Determine which huffman coding group to use. + symCount = GROUP_SIZE-1; + if (selector >= bd->nSelectors) return RETVAL_DATA_ERROR; + hufGroup = bd->groups + bd->selectors[selector++]; + base = hufGroup->base-1; + limit = hufGroup->limit-1; + } + + // Read next huffman-coded symbol (into jj). + ii = hufGroup->minLen; + jj = get_bits(bd, ii); + while (jj > limit[ii]) { + // if (ii > hufGroup->maxLen) return RETVAL_DATA_ERROR; + ii++; + + // Unroll get_bits() to avoid a function call when the data's in + // the buffer already. + kk = bd->inbufBitCount + ? (bd->inbufBits >> --(bd->inbufBitCount)) & 1 : get_bits(bd, 1); + jj = (jj << 1) | kk; + } + // Huffman decode jj into nextSym (with bounds checking) + jj-=base[ii]; + + if (ii > hufGroup->maxLen || (unsigned)jj >= MAX_SYMBOLS) + return RETVAL_DATA_ERROR; + nextSym = hufGroup->permute[jj]; + + // If this is a repeated run, loop collecting data + if ((unsigned)nextSym <= SYMBOL_RUNB) { + // If this is the start of a new run, zero out counter + if(!runPos) { + runPos = 1; + hh = 0; + } + + /* Neat trick that saves 1 symbol: instead of or-ing 0 or 1 at + each bit position, add 1 or 2 instead. For example, + 1011 is 1<<0 + 1<<1 + 2<<2. 1010 is 2<<0 + 2<<1 + 1<<2. + You can make any bit pattern that way using 1 less symbol than + the basic or 0/1 method (except all bits 0, which would use no + symbols, but a run of length 0 doesn't mean anything in this + context). Thus space is saved. */ + hh += (runPos << nextSym); // +runPos if RUNA; +2*runPos if RUNB + runPos <<= 1; + continue; + } + + /* When we hit the first non-run symbol after a run, we now know + how many times to repeat the last literal, so append that many + copies to our buffer of decoded symbols (dbuf) now. (The last + literal used is the one at the head of the mtfSymbol array.) */ + if (runPos) { + runPos = 0; + if (dbufCount+hh >= bd->dbufSize) return RETVAL_DATA_ERROR; + + uc = bd->symToByte[bd->mtfSymbol[0]]; + byteCount[uc] += hh; + while (hh--) dbuf[dbufCount++] = uc; + } + + // Is this the terminating symbol? + if (nextSym>bd->symTotal) break; + + /* At this point, the symbol we just decoded indicates a new literal + character. Subtract one to get the position in the MTF array + at which this literal is currently to be found. (Note that the + result can't be -1 or 0, because 0 and 1 are RUNA and RUNB. + Another instance of the first symbol in the mtf array, position 0, + would have been handled as part of a run.) */ + if (dbufCount>=bd->dbufSize) return RETVAL_DATA_ERROR; + ii = nextSym - 1; + uc = bd->mtfSymbol[ii]; + // On my laptop, unrolling this memmove() into a loop shaves 3.5% off + // the total running time. + while(ii--) bd->mtfSymbol[ii+1] = bd->mtfSymbol[ii]; + bd->mtfSymbol[0] = uc; + uc = bd->symToByte[uc]; + + // We have our literal byte. Save it into dbuf. + byteCount[uc]++; + dbuf[dbufCount++] = (unsigned int)uc; + } + + // Now we know what dbufCount is, do a better sanity check on origPtr. + if (bw->origPtr >= (bw->writeCount = dbufCount)) return RETVAL_DATA_ERROR; + + return 0; } // Flush output buffer to disk void flush_bunzip_outbuf(struct bunzip_data *bd, int out_fd) { - if (bd->outbufPos) { - if (write(out_fd, bd->outbuf, bd->outbufPos) != bd->outbufPos) - error_exit("Unexpected output EOF"); - bd->outbufPos = 0; - } + if (bd->outbufPos) { + if (write(out_fd, bd->outbuf, bd->outbufPos) != bd->outbufPos) + error_exit("Unexpected output EOF"); + bd->outbufPos = 0; + } } void burrows_wheeler_prep(struct bunzip_data *bd, struct bwdata *bw) { - int ii, jj; - unsigned int *dbuf = bw->dbuf; - int *byteCount = bw->byteCount; - - // Technically this part is preparation for the burrows-wheeler - // transform, but it's quick and convenient to do here. - - // Turn byteCount into cumulative occurrence counts of 0 to n-1. - jj = 0; - for (ii=0; ii<256; ii++) { - int kk = jj + byteCount[ii]; - byteCount[ii] = jj; - jj = kk; - } - - // Use occurrence counts to quickly figure out what order dbuf would be in - // if we sorted it. - for (ii=0; ii < bw->writeCount; ii++) { - unsigned char uc = dbuf[ii]; - dbuf[byteCount[uc]] |= (ii << 8); - byteCount[uc]++; - } - - // blockRandomised support would go here. - - // Using ii as position, jj as previous character, hh as current character, - // and uc as run count. - bw->dataCRC = 0xffffffffL; - - /* Decode first byte by hand to initialize "previous" byte. Note that it - doesn't get output, and if the first three characters are identical - it doesn't qualify as a run (hence uc=255, which will either wrap - to 1 or get reset). */ - if (bw->writeCount) { - bw->writePos = dbuf[bw->origPtr]; - bw->writeCurrent = (unsigned char)bw->writePos; - bw->writePos >>= 8; - bw->writeRun = -1; - } + int ii, jj; + unsigned int *dbuf = bw->dbuf; + int *byteCount = bw->byteCount; + + // Technically this part is preparation for the burrows-wheeler + // transform, but it's quick and convenient to do here. + + // Turn byteCount into cumulative occurrence counts of 0 to n-1. + jj = 0; + for (ii=0; ii<256; ii++) { + int kk = jj + byteCount[ii]; + byteCount[ii] = jj; + jj = kk; + } + + // Use occurrence counts to quickly figure out what order dbuf would be in + // if we sorted it. + for (ii=0; ii < bw->writeCount; ii++) { + unsigned char uc = dbuf[ii]; + dbuf[byteCount[uc]] |= (ii << 8); + byteCount[uc]++; + } + + // blockRandomised support would go here. + + // Using ii as position, jj as previous character, hh as current character, + // and uc as run count. + bw->dataCRC = 0xffffffffL; + + /* Decode first byte by hand to initialize "previous" byte. Note that it + doesn't get output, and if the first three characters are identical + it doesn't qualify as a run (hence uc=255, which will either wrap + to 1 or get reset). */ + if (bw->writeCount) { + bw->writePos = dbuf[bw->origPtr]; + bw->writeCurrent = (unsigned char)bw->writePos; + bw->writePos >>= 8; + bw->writeRun = -1; + } } // Decompress a block of text to intermediate buffer int read_bunzip_data(struct bunzip_data *bd) { - int rc = read_block_header(bd, bd->bwdata); - if (!rc) rc=read_huffman_data(bd, bd->bwdata); + int rc = read_block_header(bd, bd->bwdata); + if (!rc) rc=read_huffman_data(bd, bd->bwdata); - // First thing that can be done by a background thread. - burrows_wheeler_prep(bd, bd->bwdata); + // First thing that can be done by a background thread. + burrows_wheeler_prep(bd, bd->bwdata); - return rc; + return rc; } // Undo burrows-wheeler transform on intermediate buffer to produce output. @@ -497,149 +489,144 @@ int read_bunzip_data(struct bunzip_data *bd) int write_bunzip_data(struct bunzip_data *bd, struct bwdata *bw, int out_fd, char *outbuf, int len) { - unsigned int *dbuf = bw->dbuf; - int count, pos, current, run, copies, outbyte, previous, gotcount = 0; - - for (;;) { - - // If last read was short due to end of file, return last block now - if (bw->writeCount < 0) return bw->writeCount; - - // If we need to refill dbuf, do it. - if (!bw->writeCount) { - int i = read_bunzip_data(bd); - if (i) { - if (i == RETVAL_LAST_BLOCK) { - bw->writeCount = i; - return gotcount; - } else return i; - } - } - - // loop generating output - count = bw->writeCount; - pos = bw->writePos; - current = bw->writeCurrent; - run = bw->writeRun; - while (count) { - - // If somebody (like tar) wants a certain number of bytes of - // data from memory instead of written to a file, humor them. - if (len && bd->outbufPos>=len) goto dataus_interruptus; - count--; - - // Follow sequence vector to undo Burrows-Wheeler transform. - previous = current; - pos = dbuf[pos]; - current = pos&0xff; - pos >>= 8; - - // Whenever we see 3 consecutive copies of the same byte, - // the 4th is a repeat count - if (run++ == 3) { - copies = current; - outbyte = previous; - current = -1; - } else { - copies = 1; - outbyte = current; - } - - // Output bytes to buffer, flushing to file if necessary - while (copies--) { - if (bd->outbufPos == IOBUF_SIZE) flush_bunzip_outbuf(bd,out_fd); - bd->outbuf[bd->outbufPos++] = outbyte; - bw->dataCRC = (bw->dataCRC << 8) - ^ bd->crc32Table[(bw->dataCRC >> 24) ^ outbyte]; - } - if (current!=previous) run=0; - } - - // decompression of this block completed successfully - bw->dataCRC = ~(bw->dataCRC); - bd->totalCRC = ((bd->totalCRC << 1) | (bd->totalCRC >> 31)) - ^ bw->dataCRC; - - // if this block had a crc error, force file level crc error. - if (bw->dataCRC != bw->headerCRC) { - bd->totalCRC = bw->headerCRC+1; - - return RETVAL_LAST_BLOCK; - } + unsigned int *dbuf = bw->dbuf; + int count, pos, current, run, copies, outbyte, previous, gotcount = 0; + + for (;;) { + // If last read was short due to end of file, return last block now + if (bw->writeCount < 0) return bw->writeCount; + + // If we need to refill dbuf, do it. + if (!bw->writeCount) { + int i = read_bunzip_data(bd); + if (i) { + if (i == RETVAL_LAST_BLOCK) { + bw->writeCount = i; + return gotcount; + } else return i; + } + } + + // loop generating output + count = bw->writeCount; + pos = bw->writePos; + current = bw->writeCurrent; + run = bw->writeRun; + while (count) { + + // If somebody (like tar) wants a certain number of bytes of + // data from memory instead of written to a file, humor them. + if (len && bd->outbufPos>=len) goto dataus_interruptus; + count--; + + // Follow sequence vector to undo Burrows-Wheeler transform. + previous = current; + pos = dbuf[pos]; + current = pos&0xff; + pos >>= 8; + + // Whenever we see 3 consecutive copies of the same byte, + // the 4th is a repeat count + if (run++ == 3) { + copies = current; + outbyte = previous; + current = -1; + } else { + copies = 1; + outbyte = current; + } + + // Output bytes to buffer, flushing to file if necessary + while (copies--) { + if (bd->outbufPos == IOBUF_SIZE) flush_bunzip_outbuf(bd,out_fd); + bd->outbuf[bd->outbufPos++] = outbyte; + bw->dataCRC = (bw->dataCRC << 8) + ^ bd->crc32Table[(bw->dataCRC >> 24) ^ outbyte]; + } + if (current!=previous) run=0; + } + + // decompression of this block completed successfully + bw->dataCRC = ~(bw->dataCRC); + bd->totalCRC = ((bd->totalCRC << 1) | (bd->totalCRC >> 31)) ^ bw->dataCRC; + + // if this block had a crc error, force file level crc error. + if (bw->dataCRC != bw->headerCRC) { + bd->totalCRC = bw->headerCRC+1; + + return RETVAL_LAST_BLOCK; + } dataus_interruptus: - bw->writeCount = count; - if (len) { - gotcount += bd->outbufPos; - memcpy(outbuf, bd->outbuf, len); - - // If we got enough data, checkpoint loop state and return - if ((len-=bd->outbufPos)<1) { - bd->outbufPos -= len; - if (bd->outbufPos) - memmove(bd->outbuf, bd->outbuf+len, bd->outbufPos); - bw->writePos = pos; - bw->writeCurrent = current; - bw->writeRun = run; - - return gotcount; - } - } - } + bw->writeCount = count; + if (len) { + gotcount += bd->outbufPos; + memcpy(outbuf, bd->outbuf, len); + + // If we got enough data, checkpoint loop state and return + if ((len-=bd->outbufPos)<1) { + bd->outbufPos -= len; + if (bd->outbufPos) memmove(bd->outbuf, bd->outbuf+len, bd->outbufPos); + bw->writePos = pos; + bw->writeCurrent = current; + bw->writeRun = run; + + return gotcount; + } + } + } } -// Allocate the structure, read file header. If !len, src_fd contains -// filehandle to read from. Else inbuf contains data. +// Allocate the structure, read file header. If !len, src_fd contains +// filehandle to read from. Else inbuf contains data. int start_bunzip(struct bunzip_data **bdp, int src_fd, char *inbuf, int len) { - struct bunzip_data *bd; - unsigned int i; - - // Figure out how much data to allocate. - i = sizeof(struct bunzip_data); - if (!len) i += IOBUF_SIZE; - - // Allocate bunzip_data. Most fields initialize to zero. - bd = *bdp = xzalloc(i); - if (len) { - bd->inbuf = inbuf; - bd->inbufCount = len; - bd->in_fd = -1; - } else { - bd->inbuf = (char *)(bd+1); - bd->in_fd = src_fd; - } - - crc_init(bd->crc32Table, 0); - - // Ensure that file starts with "BZh". - for (i=0;i<3;i++) - if (get_bits(bd,8)!="BZh"[i]) return RETVAL_NOT_BZIP_DATA; - - // Next byte ascii '1'-'9', indicates block size in units of 100k of - // uncompressed data. Allocate intermediate buffer for block. - i = get_bits(bd, 8); - if (i<'1' || i>'9') return RETVAL_NOT_BZIP_DATA; - bd->dbufSize = 100000*(i-'0')*THREADS; - for (i=0; i<THREADS; i++) - bd->bwdata[i].dbuf = xmalloc(bd->dbufSize * sizeof(int)); - - return 0; + struct bunzip_data *bd; + unsigned int i; + + // Figure out how much data to allocate. + i = sizeof(struct bunzip_data); + if (!len) i += IOBUF_SIZE; + + // Allocate bunzip_data. Most fields initialize to zero. + bd = *bdp = xzalloc(i); + if (len) { + bd->inbuf = inbuf; + bd->inbufCount = len; + bd->in_fd = -1; + } else { + bd->inbuf = (char *)(bd+1); + bd->in_fd = src_fd; + } + + crc_init(bd->crc32Table, 0); + + // Ensure that file starts with "BZh". + for (i=0;i<3;i++) if (get_bits(bd,8)!="BZh"[i]) return RETVAL_NOT_BZIP_DATA; + + // Next byte ascii '1'-'9', indicates block size in units of 100k of + // uncompressed data. Allocate intermediate buffer for block. + i = get_bits(bd, 8); + if (i<'1' || i>'9') return RETVAL_NOT_BZIP_DATA; + bd->dbufSize = 100000*(i-'0')*THREADS; + for (i=0; i<THREADS; i++) + bd->bwdata[i].dbuf = xmalloc(bd->dbufSize * sizeof(int)); + + return 0; } -// Example usage: decompress src_fd to dst_fd. (Stops at end of bzip data, +// Example usage: decompress src_fd to dst_fd. (Stops at end of bzip data, // not end of file.) void bunzipStream(int src_fd, int dst_fd) { - struct bunzip_data *bd; - int i, j; - - if (!(i = start_bunzip(&bd,src_fd,0,0))) { - i = write_bunzip_data(bd,bd->bwdata,dst_fd,0,0); - if (i==RETVAL_LAST_BLOCK && bd->bwdata[0].headerCRC==bd->totalCRC) - i = 0; - } - flush_bunzip_outbuf(bd,dst_fd); - for (j=0; j<THREADS; j++) free(bd->bwdata[j].dbuf); - free(bd); - if (i) error_exit(bunzip_errors[-i]); + struct bunzip_data *bd; + int i, j; + + if (!(i = start_bunzip(&bd,src_fd,0,0))) { + i = write_bunzip_data(bd,bd->bwdata,dst_fd,0,0); + if (i==RETVAL_LAST_BLOCK && bd->bwdata[0].headerCRC==bd->totalCRC) i = 0; + } + flush_bunzip_outbuf(bd,dst_fd); + for (j=0; j<THREADS; j++) free(bd->bwdata[j].dbuf); + free(bd); + if (i) error_exit(bunzip_errors[-i]); } |