diff options
Diffstat (limited to 'lib')
| -rw-r--r-- | lib/bunzip.c | 502 |
1 files changed, 502 insertions, 0 deletions
diff --git a/lib/bunzip.c b/lib/bunzip.c new file mode 100644 index 00000000..c6b61ec2 --- /dev/null +++ b/lib/bunzip.c @@ -0,0 +1,502 @@ +/* vi: set sw=4 ts=4: */ +/* micro-bunzip, a small, simple bzip2 decompression implementation. + + Copyright 2003, 2006 by Rob Landley (rob@landley.net). + + Based on bzip2 decompression code by Julian R Seward (jseward@acm.org), + which also acknowledges contributions by Mike Burrows, David Wheeler, Peter + Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten, Robert Sedgewick, and + Jon L. Bentley. (Didn't actually use any of their code, though.) +*/ + +#include "toys.h" + +/* Constants for huffman coding */ +#define MAX_GROUPS 6 +#define GROUP_SIZE 50 /* 64 would have been more efficient */ +#define MAX_HUFCODE_BITS 20 /* Longest huffman code allowed */ +#define MAX_SYMBOLS 258 /* 256 literals + RUNA + RUNB */ +#define SYMBOL_RUNA 0 +#define SYMBOL_RUNB 1 + +/* Status return values */ +#define RETVAL_OK 0 +#define RETVAL_LAST_BLOCK (-1) +#define RETVAL_NOT_BZIP_DATA (-2) +#define RETVAL_UNEXPECTED_INPUT_EOF (-3) +#define RETVAL_UNEXPECTED_OUTPUT_EOF (-4) +#define RETVAL_DATA_ERROR (-5) +#define RETVAL_OUT_OF_MEMORY (-6) +#define RETVAL_OBSOLETE_INPUT (-7) + +/* Other housekeeping constants */ +#define IOBUF_SIZE 4096 + +char *bunzip_errors[]={NULL,"Bad file checksum","Not bzip data", + "Unexpected input EOF","Unexpected output EOF","Data error", + "Out of memory","Obsolete (pre 0.9.5) bzip format not supported."}; + +/* This is what we know about each huffman coding group */ +struct group_data { + int limit[MAX_HUFCODE_BITS],base[MAX_HUFCODE_BITS],permute[MAX_SYMBOLS]; + char minLen, maxLen; +}; + +/* Structure holding all the housekeeping data, including IO buffers and + memory that persists between calls to bunzip */ +typedef struct { + /* For I/O error handling */ + jmp_buf jmpbuf; + /* Input stream, input buffer, input bit buffer */ + int in_fd,inbufCount,inbufPos; + unsigned char *inbuf; + unsigned int inbufBitCount, inbufBits; + /* Output buffer */ + char outbuf[IOBUF_SIZE]; + int outbufPos; + /* The CRC values stored in the block header and calculated from the data */ + unsigned int crc32Table[256],headerCRC, dataCRC, totalCRC; + /* Intermediate buffer and its size (in bytes) */ + unsigned int *dbuf, dbufSize; + /* State for interrupting output loop */ + int writePos,writeRun,writeCount,writeCurrent; + + /* These things are a bit too big to go on the stack */ + unsigned char selectors[32768]; /* nSelectors=15 bits */ + struct group_data groups[MAX_GROUPS]; /* huffman coding tables */ +} bunzip_data; + +/* Return the next nnn bits of input. All reads from the compressed input + are done through this function. All reads are big endian */ +static unsigned int get_bits(bunzip_data *bd, char bits_wanted) +{ + unsigned int bits=0; + + /* If we need to get more data from the byte buffer, do so. (Loop getting + one byte at a time to enforce endianness and avoid unaligned access.) */ + while (bd->inbufBitCount<bits_wanted) { + /* If we need to read more data from file into byte buffer, do so */ + if(bd->inbufPos==bd->inbufCount) { + if(!(bd->inbufCount = read(bd->in_fd, bd->inbuf, IOBUF_SIZE))) + longjmp(bd->jmpbuf,RETVAL_UNEXPECTED_INPUT_EOF); + bd->inbufPos=0; + } + /* Avoid 32-bit overflow (dump bit buffer to top of output) */ + if(bd->inbufBitCount>=24) { + bits=bd->inbufBits&((1<<bd->inbufBitCount)-1); + bits_wanted-=bd->inbufBitCount; + bits<<=bits_wanted; + bd->inbufBitCount=0; + } + /* Grab next 8 bits of input from buffer. */ + bd->inbufBits=(bd->inbufBits<<8)|bd->inbuf[bd->inbufPos++]; + bd->inbufBitCount+=8; + } + /* Calculate result */ + bd->inbufBitCount-=bits_wanted; + bits|=(bd->inbufBits>>bd->inbufBitCount)&((1<<bits_wanted)-1); + + return bits; +} + +/* Decompress a block of text to into intermediate buffer */ + +extern int read_bunzip_data(bunzip_data *bd) +{ + struct group_data *hufGroup; + int dbufCount,nextSym,dbufSize,origPtr,groupCount,*base,*limit,selector, + i,j,k,t,runPos,symCount,symTotal,nSelectors,byteCount[256]; + unsigned char uc, symToByte[256], mtfSymbol[256], *selectors; + unsigned int *dbuf; + + /* Read in header signature (borrowing mtfSymbol for temp space). */ + for(i=0;i<6;i++) mtfSymbol[i]=get_bits(bd,8); + mtfSymbol[6]=0; + /* Read CRC (which is stored big endian). */ + bd->headerCRC=get_bits(bd,32); + /* Is this the last block (with CRC for file)? */ + if(!strcmp(mtfSymbol,"\x17\x72\x45\x38\x50\x90")) + return RETVAL_LAST_BLOCK; + /* If it's not a valid data block, barf. */ + if(strcmp(mtfSymbol,"\x31\x41\x59\x26\x53\x59")) + return RETVAL_NOT_BZIP_DATA; + + dbuf=bd->dbuf; + dbufSize=bd->dbufSize; + selectors=bd->selectors; + /* We can add support for blockRandomised if anybody complains. There was + some code for this in busybox 1.0.0-pre3, but nobody ever noticed that + it didn't actually work. */ + if(get_bits(bd,1)) return RETVAL_OBSOLETE_INPUT; + if((origPtr=get_bits(bd,24)) > dbufSize) return RETVAL_DATA_ERROR; + /* mapping table: if some byte values are never used (encoding things + like ascii text), the compression code removes the gaps to have fewer + symbols to deal with, and writes a sparse bitfield indicating which + values were present. We make a translation table to convert the symbols + back to the corresponding bytes. */ + t=get_bits(bd, 16); + memset(symToByte,0,256); + symTotal=0; + for (i=0;i<16;i++) { + if(t&(1<<(15-i))) { + k=get_bits(bd,16); + for(j=0;j<16;j++) + if(k&(1<<(15-j))) symToByte[symTotal++]=(16*i)+j; + } + } + /* How many different huffman coding groups does this block use? */ + groupCount=get_bits(bd,3); + if (groupCount<2 || groupCount>MAX_GROUPS) return RETVAL_DATA_ERROR; + /* nSelectors: Every GROUP_SIZE many symbols we select a new huffman coding + group. Read in the group selector list, which is stored as MTF encoded + bit runs. */ + if(!(nSelectors=get_bits(bd, 15))) return RETVAL_DATA_ERROR; + for(i=0; i<groupCount; i++) mtfSymbol[i] = i; + for(i=0; i<nSelectors; i++) { + /* Get next value */ + for(j=0;get_bits(bd,1);j++) if (j>=groupCount) return RETVAL_DATA_ERROR; + /* Decode MTF to get the next selector */ + uc = mtfSymbol[j]; + memmove(mtfSymbol+1,mtfSymbol,j); + mtfSymbol[0]=selectors[i]=uc; + } + /* Read the huffman coding tables for each group, which code for symTotal + literal symbols, plus two run symbols (RUNA, RUNB) */ + symCount=symTotal+2; + for (j=0; j<groupCount; j++) { + unsigned char length[MAX_SYMBOLS],temp[MAX_HUFCODE_BITS+1]; + int minLen, maxLen, pp; + /* Read lengths */ + t=get_bits(bd, 5); + for (i = 0; i < symCount; i++) { + for(;;) { + if (t < 1 || t > MAX_HUFCODE_BITS) return RETVAL_DATA_ERROR; + if(!get_bits(bd, 1)) break; + if(!get_bits(bd, 1)) t++; + else t--; + } + length[i] = t; + } + /* Find largest and smallest lengths in this group */ + minLen=maxLen=length[0]; + for(i = 1; i < symCount; i++) { + if(length[i] > maxLen) maxLen = length[i]; + else if(length[i] < minLen) minLen = length[i]; + } + /* Calculate permute[], base[], and limit[] tables from length[]. + * + * permute[] is the lookup table for converting huffman coded symbols + * into decoded symbols. base[] is the amount to subtract from the + * value of a huffman symbol of a given length when using permute[]. + * + * limit[] indicates the largest numerical value a symbol with a given + * number of bits can have. It lets us know when to stop reading. + * + * To use these, keep reading bits until value<=limit[bitcount] or + * you've read over 20 bits (error). Then the decoded symbol + * equals permute[hufcode_value-base[hufcode_bitcount]]. + */ + hufGroup=bd->groups+j; + hufGroup->minLen = minLen; + hufGroup->maxLen = maxLen; + /* Note that minLen can't be smaller than 1, so we adjust the base + and limit array pointers so we're not always wasting the first + entry. We do this again when using them (during symbol decoding).*/ + base=hufGroup->base-1; + limit=hufGroup->limit-1; + /* Calculate permute[] */ + pp = 0; + for(i=minLen;i<=maxLen;i++) + for(t=0;t<symCount;t++) + if(length[t]==i) hufGroup->permute[pp++] = t; + /* Count cumulative symbols coded for at each bit length */ + for (i=minLen;i<=maxLen;i++) temp[i]=limit[i]=0; + for (i=0;i<symCount;i++) temp[length[i]]++; + /* Calculate limit[] (the largest symbol-coding value at each bit + * length, which is (previous limit<<1)+symbols at this level), and + * base[] (number of symbols to ignore at each bit length, which is + * limit-cumulative count of symbols coded for already). */ + pp=t=0; + for (i=minLen; i<maxLen; i++) { + pp+=temp[i]; + limit[i]=pp-1; + pp<<=1; + base[i+1]=pp-(t+=temp[i]); + } + limit[maxLen]=pp+temp[maxLen]-1; + base[minLen]=0; + } + /* We've finished reading and digesting the block header. Now read this + block's huffman coded symbols from the file and undo the huffman coding + and run length encoding, saving the result into dbuf[dbufCount++]=uc */ + + /* Initialize symbol occurrence counters and symbol mtf table */ + memset(byteCount,0,256*sizeof(int)); + for(i=0;i<256;i++) mtfSymbol[i]=(unsigned char)i; + /* Loop through compressed symbols */ + runPos=dbufCount=symCount=selector=0; + for(;;) { + /* Determine which huffman coding group to use. */ + if(!(symCount--)) { + symCount=GROUP_SIZE-1; + if(selector>=nSelectors) return RETVAL_DATA_ERROR; + hufGroup=bd->groups+selectors[selector++]; + base=hufGroup->base-1; + limit=hufGroup->limit-1; + } + /* Read next huffman-coded symbol */ + i = hufGroup->minLen; + j=get_bits(bd, i); + for(;;) { + if (i > hufGroup->maxLen) return RETVAL_DATA_ERROR; + if (j <= limit[i]) break; + i++; + + j = (j << 1) | get_bits(bd,1); + } + /* Huffman decode nextSym (with bounds checking) */ + j-=base[i]; + if (j < 0 || j >= MAX_SYMBOLS) return RETVAL_DATA_ERROR; + nextSym = hufGroup->permute[j]; + /* If this is a repeated run, loop collecting data */ + if (nextSym == SYMBOL_RUNA || nextSym == SYMBOL_RUNB) { + /* If this is the start of a new run, zero out counter */ + if(!runPos) { + runPos = 1; + t = 0; + } + /* Neat trick that saves 1 symbol: instead of or-ing 0 or 1 at + each bit position, add 1 or 2 instead. For example, + 1011 is 1<<0 + 1<<1 + 2<<2. 1010 is 2<<0 + 2<<1 + 1<<2. + You can make any bit pattern that way using 1 less symbol than + the basic or 0/1 method (except all bits 0, which would use no + symbols, but a run of length 0 doesn't mean anything in this + context). Thus space is saved. */ + if (nextSym == SYMBOL_RUNA) t += runPos; + else t += 2*runPos; + runPos <<= 1; + continue; + } + /* When we hit the first non-run symbol after a run, we now know + how many times to repeat the last literal, so append that many + copies to our buffer of decoded symbols (dbuf) now. (The last + literal used is the one at the head of the mtfSymbol array.) */ + if(runPos) { + runPos=0; + if(dbufCount+t>=dbufSize) return RETVAL_DATA_ERROR; + + uc = symToByte[mtfSymbol[0]]; + byteCount[uc] += t; + while(t--) dbuf[dbufCount++]=uc; + } + /* Is this the terminating symbol? */ + if(nextSym>symTotal) break; + /* At this point, the symbol we just decoded indicates a new literal + character. Subtract one to get the position in the MTF array + at which this literal is currently to be found. (Note that the + result can't be -1 or 0, because 0 and 1 are RUNA and RUNB. + Another instance of the first symbol in the mtf array, position 0, + would have been handled as part of a run.) */ + if(dbufCount>=dbufSize) return RETVAL_DATA_ERROR; + i = nextSym - 1; + uc = mtfSymbol[i]; + memmove(mtfSymbol+1,mtfSymbol,i); + mtfSymbol[0] = uc; + uc=symToByte[uc]; + /* We have our literal byte. Save it into dbuf. */ + byteCount[uc]++; + dbuf[dbufCount++] = (unsigned int)uc; + } + /* At this point, we've finished reading huffman-coded symbols and + compressed runs from the input stream. There are dbufCount many of + them in dbuf[]. Now undo the Burrows-Wheeler transform on dbuf. + See http://dogma.net/markn/articles/bwt/bwt.htm + */ + + /* Now we know what dbufCount is, do a better sanity check on origPtr. */ + if (origPtr<0 || origPtr>=dbufCount) return RETVAL_DATA_ERROR; + /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */ + j=0; + for(i=0;i<256;i++) { + k=j+byteCount[i]; + byteCount[i] = j; + j=k; + } + /* Figure out what order dbuf would be in if we sorted it. */ + for (i=0;i<dbufCount;i++) { + uc = (unsigned char)(dbuf[i] & 0xff); + dbuf[byteCount[uc]] |= (i << 8); + byteCount[uc]++; + } + /* blockRandomised support would go here. */ + + /* Using i as position, j as previous character, t as current character, + and uc as run count */ + bd->dataCRC = 0xffffffffL; + /* Decode first byte by hand to initialize "previous" byte. Note that it + doesn't get output, and if the first three characters are identical + it doesn't qualify as a run (hence uc=255, which will either wrap + to 1 or get reset). */ + if(dbufCount) { + bd->writePos=dbuf[origPtr]; + bd->writeCurrent=(unsigned char)(bd->writePos&0xff); + bd->writePos>>=8; + bd->writeRun=-1; + } + bd->writeCount=dbufCount; + + return RETVAL_OK; +} + +/* Flush output buffer to disk */ +extern void flush_bunzip_outbuf(bunzip_data *bd, int out_fd) +{ + if(bd->outbufPos) { + if(write(out_fd, bd->outbuf, bd->outbufPos) != bd->outbufPos) + longjmp(bd->jmpbuf,RETVAL_UNEXPECTED_OUTPUT_EOF); + bd->outbufPos=0; + } +} + + +/* Undo burrows-wheeler transform on intermediate buffer to produce output. + If !len, write up to len bytes of data to buf. Otherwise write to out_fd. + Returns len ? bytes written : RETVAL_OK. Notice all errors negative #'s. */ +extern int write_bunzip_data(bunzip_data *bd, int out_fd, char *outbuf, int len) +{ + unsigned int *dbuf=bd->dbuf; + int count,pos,current, run,copies,outbyte,previous,gotcount=0; + + for(;;) { + /* If last read was short due to end of file, return last block now */ + if(bd->writeCount<0) return bd->writeCount; + /* If we need to refill dbuf, do it. */ + if(!bd->writeCount) { + int i=read_bunzip_data(bd); + if(i) { + if(i==RETVAL_LAST_BLOCK) { + bd->writeCount=i; + return gotcount; + } else return i; + } + } + /* Loop generating output */ + count=bd->writeCount; + pos=bd->writePos; + current=bd->writeCurrent; + run=bd->writeRun; + while(count) { + /* If somebody (like busybox tar) wants a certain number of bytes of + data from memory instead of written to a file, humor them */ + if(len && bd->outbufPos>=len) goto dataus_interruptus; + count--; + /* Follow sequence vector to undo Burrows-Wheeler transform */ + previous=current; + pos=dbuf[pos]; + current=pos&0xff; + pos>>=8; + /* Whenever we see 3 consecutive copies of the same byte, + the 4th is a repeat count */ + if(run++==3) { + copies=current; + outbyte=previous; + current=-1; + } else { + copies=1; + outbyte=current; + } + /* Output bytes to buffer, flushing to file if necessary */ + while(copies--) { + if(bd->outbufPos == IOBUF_SIZE) flush_bunzip_outbuf(bd,out_fd); + bd->outbuf[bd->outbufPos++] = outbyte; + bd->dataCRC = (bd->dataCRC << 8) + ^ bd->crc32Table[(bd->dataCRC >> 24) ^ outbyte]; + } + if(current!=previous) run=0; + } + /* Decompression of this block completed successfully */ + bd->dataCRC=~(bd->dataCRC); + bd->totalCRC=((bd->totalCRC << 1) | (bd->totalCRC >> 31)) ^ bd->dataCRC; + /* If this block had a CRC error, force file level CRC error. */ + if(bd->dataCRC!=bd->headerCRC) { + bd->totalCRC=bd->headerCRC+1; + return RETVAL_LAST_BLOCK; + } +dataus_interruptus: + bd->writeCount=count; + if(len) { + gotcount+=bd->outbufPos; + memcpy(outbuf,bd->outbuf,len); + /* If we got enough data, checkpoint loop state and return */ + if((len-=bd->outbufPos)<1) { + bd->outbufPos-=len; + if(bd->outbufPos) + memmove(bd->outbuf,bd->outbuf+len,bd->outbufPos); + bd->writePos=pos; + bd->writeCurrent=current; + bd->writeRun=run; + return gotcount; + } + } + } +} + +/* Allocate the structure, read file header. If !len, src_fd contains + filehandle to read from. Else inbuf contains data. */ +extern int start_bunzip(bunzip_data **bdp, int src_fd, char *inbuf, int len) +{ + bunzip_data *bd; + unsigned int i,j,c; + + /* Figure out how much data to allocate */ + i=sizeof(bunzip_data); + if(!len) i+=IOBUF_SIZE; + /* Allocate bunzip_data. Most fields initialize to zero. */ + if(!(bd=*bdp=malloc(i))) return RETVAL_OUT_OF_MEMORY; + memset(bd,0,sizeof(bunzip_data)); + if(len) { + bd->inbuf=inbuf; + bd->inbufCount=len; + bd->in_fd=-1; + } else { + bd->inbuf=(char *)(bd+1); + bd->in_fd=src_fd; + } + /* Init the CRC32 table (big endian) */ + for(i=0;i<256;i++) { + c=i<<24; + for(j=8;j;j--) + c=c&0x80000000 ? (c<<1)^0x04c11db7 : (c<<1); + bd->crc32Table[i]=c; + } + /* Setup for I/O error handling via longjmp */ + i=setjmp(bd->jmpbuf); + if(i) return i; + /* Ensure that file starts with "BZh" */ + for(i=0;i<3;i++) if(get_bits(bd,8)!="BZh"[i]) return RETVAL_NOT_BZIP_DATA; + /* Next byte ascii '1'-'9', indicates block size in units of 100k of + uncompressed data. Allocate intermediate buffer for block. */ + i=get_bits(bd,8); + if (i<'1' || i>'9') return RETVAL_NOT_BZIP_DATA; + bd->dbufSize=100000*(i-'0'); + if(!(bd->dbuf=malloc(bd->dbufSize * sizeof(int)))) + return RETVAL_OUT_OF_MEMORY; + return RETVAL_OK; +} + +/* Example usage: decompress src_fd to dst_fd. (Stops at end of bzip data, + not end of file.) */ +extern char *uncompressStream(int src_fd, int dst_fd) +{ + bunzip_data *bd; + int i; + + if(!(i=start_bunzip(&bd,src_fd,0,0))) { + i=write_bunzip_data(bd,dst_fd,0,0); + if(i==RETVAL_LAST_BLOCK && bd->headerCRC==bd->totalCRC) i=RETVAL_OK; + } + flush_bunzip_outbuf(bd,dst_fd); + if(bd->dbuf) free(bd->dbuf); + free(bd); + return bunzip_errors[-i]; +} |