| Age | Commit message (Collapse) | Author |
|---|
|
This lets me see the _meaningful_ differences between toybox and
e2fsprogs, which is probably good for the health of both.
I've tried to get the whitespace fixed upstream a few times since 2017,
but...
(The current differences are that e2fsprogs doesn't support f2fs labels,
and outputs reiserfs labels after the uuid rather than before.)
On the util-linux front, although my patch earlier this month fixed the
tests against util-linux 2.32, I now have 2.33 on my laptop, and that's
added a new LABEL_FATBOOT field :-/
|
|
Commit c26870dab3462c6176936384b090df6b9ba46dee broke ls' error
reporting for files that don't exist. `ls $F` is used by some as an
equivalent of `test -e $F`.
This patch also adds a regression test.
|
|
This fixes the case where someone's done something (weird) like:
find src/*.c -name foo.c
Previously the match would fail because one side of the comparison was
already a path.
|
|
as unusual timestamp formats
After further research and testing, I've produced a patch which handles
all filenames with special characters by copying the GNU quoting
behavior, and also treats anything following a tab as a timestamp. This
increases both ability to handle possible filenames and ability to
apply patches found in the field.
In diff, quote and escape filenames according to the following rules.
* Surround the filename with quotes if it contains a byte less than 0x20,
a byte greater than or equal to 0x80, space, backslash, or quote.
* Replace alert, backspace, form feed, newline, carriage return, tab, vertical
tab, backslash, and quote with \a, \b, \f, \n, \r, \t, \v, \\, and \",
respectively.
* Replace other bytes less than 0x20 or greater than or equal to 0x80 with a
backslash followed by the three octal digits representing the value of the
byte.
* Treat valid UTF-8 characters involving sequences of bytes greater than or
equal to 0x80 the same as other sequences of such bytes.
In patch, process quoted and escaped filenames according to the following
rules.
* If the filename does not begin with a quote, do not modify the filename.
* Remove quotes surrounding the filename.
* In quoted filenames, replace \a, \b, \f, \n, \r, \t, \v, \\, and \" with
alert, backspace, form feed, newline, carriage return, tab, vertical tab,
backslash, and quote, respectively.
* In quoted filenames, replace a backslash followed by octal digits with the
byte with that value in octal.
Also, in patch, treat anything on a +++ or --- line following a tab character
after the beginning of the filename as a timestamp, rather than part of the
filename.
|
|
if true; then if false; then echo one; elif echo two; then echo three; else echo four; fi; fi
|
|
Unlike ls, find does treat ENOENT specially. Add an extra test (and fix
the behavior) for the case of ENOENT for a path provided on the command
line --- unlike other ENOENT cases (typically dangling symlinks), ENOENT
for a command line argument should report an error.
Also remove obsolete `|sed` from the symlink loop test.
|
|
I put it in configure, with the other environment variables, instead of
in scripts/make.sh. Here's Elliott's original commit comment:
==========
Just use `ASAN=1 make test_grep` or whatever.
You'll probably want to set $ASAN_SYMBOLIZER_PATH to point to
llvm-symbolizer, but Debian makes that annoying by calling the
symbolizer /usr/bin/llvm-symbolizer-4.0 or whatever, and ASan refuses to
use it:
==43370==ERROR: External symbolizer path is set to
'/usr/bin/llvm-symbolizer-4.0' which isn't a known symbolizer. Please
set the path to the llvm-symbolizer binary or other known tool.
My usual workaround for this is to drop an llvm-symbolizer symlink in
the current directory, and I'm happy to automate that in the script to
make it require no knowledge of any of this nonsense, but haven't done
so in this initial patch.
I tested that this is actually working by reverting the grep fix and
running `ASAN=1 make test_grep`.
|
|
The Linux kernel uses the --max-args synonym for -n.
Barbarians who use vi need xargs' -o to be able to do something like:
find -name xargs.c | xargs vi # Sad vi.
find -name xargs.c | xargs -o vi # Happy vi.
The -p option needs fixing to read from /dev/tty because stdin is
otherwise occupied in xargs. I think xargs is the only place that needs
this, so it didn't seem sensible to make all callers to yesno() be
specific about which they wanted, hence the new function.
Also remove the documentation for the build-time XARGS_PEDANTIC option
which isn't actually implemented.
Also add a TODO for -P (which is used by at least one script in the
Linux kernel).
|
|
Tweak DIRTREE_STATLESS so it returns zero stat for any error (I'm testing
that dev, ino, and blksize are all zero), and fill in file type from readdir()
|
|
The "info" pages are something very different from the "intro" pages :-)
do_lines already closes the fd.
Also improve the error message for `man`.
|
|
macOS remains awkward, though, but this retains our Android/Linux
behavior and is closer to the platform's getconf(1) for macOS.
Strictly macOS denies all knowledge of UIO_MAXIOV, but the "undefined"
you'll get from this patch seems closer than the "1024" we used to
give.
|
|
Before:
$ ./rm
rm: Needs 1 argument
$ ./rmdir
rmdir: Needs 1 argument (see "rmdir --help")
After:
$ ./rm
rm: Needs 1 argument (see "rm --help")
|
|
|
|
(Commit 7771e94e2a08 broke it.)
|
|
Not in help text yet. Needs sh and route enabled in pending to do much.
todo: work through the scripts/install.sh $PENDING list and add native
toolchain support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The behavior with "\xAV" (where the second hex digit is invalid) is
different from the behavior with "\xVA", and echo and printf differ from
each other.
|
|
You can now run:
echo hello;
if true; then echo hello; fi;
while true; do echo hello; done
It's got the start of for loops but needs environment variable resolver
to do much with them.
|
|
|
|
|
|
glibc says "Too many levels of symbolic links", but BSD says "Too many
symbolic links encountered". Until it becomes a problem, allow any error
message.
|
|
Subtract the amount we actually read, not what we asked for.
|
|
GCC 8.2 (which my laptop appears to have been quietly upgraded to)
points out that the %04X of an int might actually take 8 characters;
between that, the "U+", and the trailing NUL, we're gonna need a
bigger boat...
|
|
(revert afe951b19c0f with the table of magic constants). If you want speed,
there's already a config option to use the libssl version instead.
|
|
Don't depend on directory iteration order in a test.
|
|
This was the last user of get_rawline, which lets us remove it.
|
|
This gets the tests passing with both toybox and util-linux 2.32.1
blkid. We use -s to get around the fact that we still don't support ntfs'
$VOLUME_NAME attribute.
|
|
Missing SEC_TYPE for ext3, msdos, and vfat.
Missing LABEL for f2fs and ntfs.
Wrong endian of UUID for msdos, ntfs, and vfat.
|
|
ENOENT is ignored, but other errors are reported.
|
|
Since this masks, it doesn't actually have the same bug as
e5942a8c90c2f52550496fdf08efddb564d8e5a3, but we may as well fix the
other example of that questionable idiom while we're thinking about it...
|
|
There's a race between LOOP_CTL_GET_FREE and LOOP_SET_FD. Work around it
by just retrying if we get EBUSY on the LOOP_SET_FD call. This is what
similar code in ChromeOS already does.
Bug: http://b/135716654
|
|
marshalling for vforked subshells, fix rc returned from run_pipeline for
variable assignment. (Well, sort of: X=$(false) still needs rc = 1.)
|
|
ext stores extended attributes in a way that makes all the numbers in
the test incorrect. For now, just disable the test in that case.
|
|
|
|
A TOYFLAG_NOFORK command must run in the context of toysh, but a MAYFORK
can either run standalone or run in the toysh process. MAYFORK means it
cleans up after itself: no leaked resources (malloc, mmap, filehandles, etc),
even in error_exit() paths that would longjmp() back to the shell. It also
doesn't discard anything we need to retain (don't close stdout, change
toys.optargs[] so we can't free it, etc)...
|
|
output 5 digits of octal stat data instead of 4, due to hardwired leading 0
instead of %04a sprintf prefix.
|
|
|
|
make: *** No rule to make target 'generated/Config.probed', needed by 'Config.in'. Stop.
make: *** Waiting for unfinished jobs....
|
|
|
|
No current caller except grep needs this, but consistency seems like a
good idea.
Also change the xregcomp error message to be a bit more human-readable,
rather than mention an implementation detail.
|
|
|
|
All regcomp callers are now going through xregcomp.
|
|
We use (char *)1 and (char *)2 to indicate errors (they can never be valid
pointers because both malloc() and mmap() return aligned memory and those
align down to NULL, plus Linux maps 4k at the bottom to catch null
dereferences anyway), and then typecast it to long (trusting in LP64) to
do an integer <=2 comparison... except that needs to be UNSIGNED long or
else pointers in the top half of the virtual memory space become negative
and the <=2 false positives them as errors. (Oops.)
|
|
POSIX says there's no such thing as an empty regular expression. The
grammar excludes the possibility:
https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html
BSD agrees with POSIX, and Android and macOS' BSD-based implementations
reject the empty regular expression.
GNU apparently disagrees.
Luckily, BSD does accept the empty *sub* expression `()`, despite their
error message for REG_EMPTY being "empty (sub)expression". This is
presumably a bug, except there's explicit code to support it that is at
least 26 years old:
https://github.com/freebsd/freebsd/blame/master/lib/libc/regex/regcomp.c#L383
This workaround also works fine with glibc.
If we want GNU behavior, I'm struggling to come up with another way to
fake it. If we want POSIX behavior, we could easily just add a check to
reject "" on glibc.
Also switch to xregcomp().
|
|
Just use `ASAN=1 make test_grep` or whatever.
You'll probably want to set $ASAN_SYMBOLIZER_PATH to point to
llvm-symbolizer, but Debian makes that annoying by calling the
symbolizer /usr/bin/llvm-symbolizer-4.0 or whatever, and ASan refuses to
use it:
==43370==ERROR: External symbolizer path is set to
'/usr/bin/llvm-symbolizer-4.0' which isn't a known symbolizer. Please
set the path to the llvm-symbolizer binary or other known tool.
My usual workaround for this is to drop an llvm-symbolizer symlink in
the current directory, and I'm happy to automate that in the script to
make it require no knowledge of any of this nonsense, but haven't done
so in this initial patch.
I tested that this is actually working by reverting the grep fix and
running `ASAN=1 make test_grep`.
|
