| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
A tar file created by toybox tar with values large enough to need
base-256 rather than ASCII octal caused a tar reader to crash, and
caused GNU tar to complain.
I note from the docs at
https://github.com/libarchive/libarchive/blob/master/libarchive/tar.5#L326
that they imply that only the top *bit* should be set to indicate this
format, not the whole top byte, to give a 95-bit or 63-bit field. But I
don't think we can hit that in practice?
Bug: http://issuetracker.google.com/181683612
|
|
|
|
|
|
|
|
Other dd implementations always show the status on exit, whether success
or failure. Fix that by using xsigatexit() (and clarify the comment for
that function a little, since it didn't previously address the "at exit"
part of its behavior at all).
This also fixes SIGUSR1 behavior so that we show the status immediately
rather than on the next trip round the read/write loop.
Tested with `dd of=/dev/full`, sending SIGUSR1 twice from another shell
(to see the status immediately each time, without exiting), then hitting
^C (to see the status and then exiting), then restarting dd and hitting
enter (to see a write error followed by the status before exiting).
Bug: https://issuetracker.google.com/177017283
|
|
"Works for me".
|
|
|
|
My patch to fix df behavior on macOS broke the stat build on macOS.
First off, we had %s and %S the wrong way round compared to coreutils,
though since Linux always seems to use the same value for both,
no-one will ever have noticed.
Annoyingly, Linux and macOS disagree about what statfs::f_bsize
means, and whether statfs::f_iosize and statfs::f_frsize exist (each
has one or the other, depending on what f_bsize *doesn't* mean to
them). This mess is presumably why statvfs exists.
Unfortunately, statvfs on macOS at least doesn't contain the file
system type information. So we either need to do *both* statfs()
and statvfs() for macOS, or we need to take into account the different
fields.
This patch adds an #ifdef outside of portability.h because I wasn't
sure we actually wanted to add statfs_best_transfer_size() and
statfs_real_block_size() functions to lib for this. But that's an
easy cleanup if desired.
|
|
|
|
And fix one test for NUL that should be a length test for -z support
|
|
On Linux, struct statvfs' f_bsize and f_frsize seem to be
interchangeable. On macOS, they're wildly different. f_bsize is the
"preferred length of I/O requests for files on this file system"
(corresponding to statfs::f_iosize), and f_frsize is the "size in
bytes of the minimum unit of allocation on this file system"
(corresponding to statfs::f_bsize. POSIX appears to say nothing
about the interpretation of these fields, but man7.org's statvfs(2)
page is quite clear that statvfs::f_blocks, for example, is in units
of f_frsize, not f_bsize.
This is the only place in the tree where we use statvfs::f_bsize
(other than the stat(1) output that's supposed to be f_bsize and
that has a corresponding f_frsize dual anyway.
I've removed the Apple-specific #define f_frsize in portability.h
because that seems to have been from my previous attempt to understand
what was going on here. The output of the relevant stat(1) fields
on macOS are the same before/after this patch.
This makes toybox df's output match the system's df on a MacBook
Pro running macOS 11.2.1.
Tested on a Raspberry Pi 400 running Linux too, where I see no
change in the output before/after this patch.
|
|
|
|
|
|
more recently than the resulting mount point.
|
|
|
|
|
|
Use "" instead of '' to quote command as the command contains expandable
variables.
Change-Id: Iaa8825e56243b369199588cbf6e47a1aba985804
|
|
|
|
|
|
Requested by aheirman on github: uses access(X_OK) which checks access
control lists as well as permissions, and that _we_ can access them
(u+x could be owned by a different user)...
|
|
|
|
|
|
|
|
|
|
|
|
Also reorder the --help output to separate the "whats" from the "hows",
as with other commands that have lots of options, and add units to the
help too.
|
|
by not writing as much payload as the header promised.
|
|
|
|
Add a test, with comment that "make install_test" doesn't currently exist...
|
|
Ethan Sommer noticed that chown is using chgrp_main() due to OLDTOY, so
the wrapper function isn't needed.
|
|
|
|
Starting two netcats at the same time and expecting them to be able to
talk to each is a little optimistic. I don't know whether `sleep .1`
will be sufficient, but wanted to try that before going to `sleep 1`
since neither the toybox nor the github nor the Android infrastructure
is running these tests in parallel, those seconds add up.
Right now this has a ~20% flake rate on the Android infrastructure. I
was able to reproduce the flake locally with `while true ; do make
test_netcat ; done` on my desktop before this patch, but not after.
(Though my desktop is way overpowered for just running that, whereas the
build servers tend to be pretty busy, which is why I reserve the right
to return later with a longer delay.)
|
|
Avoid fgets() into toybuf other than to skip header lines, preferring
fscanf() or xgetline() instead.
Remove the early returns if we fail to skip a header line (fixes #62).
Fix `netstat -xl` which was previously broken (because only -a would
include listening sockets).
Fix a variety of formatting issues, bringing the diff between toybox
netstat and net-tools netstat down (which was what I used for testing).
Use FLAG() more consistently.
|
|
|
|
I need to set up a test environment for this...
|
|
|
|
|
|
Instead of unlink() && check errno, call lstat() explicitly to check
file existence if "-f" is specified.
There is a regression when if the path to be removed is nonexistence
and within a readonly filesystem, then unlink() could set the EROFS
errno instead of ENOENT, thus screwing up the output of `rm`.
|
|
or else singlemake enables it for all commands. (I was trying to
move it out of the command namespace, but it's not a global config
option either...)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remove STDIN_FILENO and use FLAG().
Use xsetspeed() rather than have a duplicate table.
Inline getty's print_prompt().
There's still a lot of cleanup needed here, in particular use of toybuf
and removal of the inappropriately-named HOSTNAME_SIZE (and ideally
sharing that logic with login(1) which already contains a better
implementation of it).
|
|
|
|
and address TODO where -z was still splitting patterns on \n
|
