aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2019-09-25Add ln -TRob Landley
2019-09-22Avoid spurious test failures when fork() coincides with signal being sent,Rob Landley
then pgrep finds child that hasn't exec("sleep") yet. So add 1/10 sec sleep to let exec() happen before pgrep. While we're there fix spurious "terminated" messages and reorder test file creation so it fits in 80 columns.
2019-09-17Allow --tmpdir's argument to be optional.Rob Landley
2019-09-17tar.test: add a test for a sparse file with a hole at the end.Elliott Hughes
2019-09-15Move mktemp.test comments into test descriptions.Rob Landley
2019-09-15Elliott's test for sparse file size display.Rob Landley
2019-09-13timeout: fix exit status for sneaky subprocesses.Elliott Hughes
There's nothing to stop a subprocess from catching our SIGTERM on timeout and exiting, causing us to incorrectly report that it didn't time out. Android's ART has a utility that does exactly this. Explicitly catch this case, and add corresponding tests. Bug: http://b/141007616
2019-09-09ls: fix spacing of -lZ and --full-time.Elliott Hughes
Two more spacing bugs here, one before the security context for -Z, and one after the size with --full-time. Before: $ ./toybox ls -lZ --full-time Config. -rw-r----- 1 enh primarygroup? 56162019-09-07 21:09:32.892215100 -0700 Config.in After: $ ./toybox ls -lZ --full-time Config. -rw-r----- 1 enh primarygroup ? 5616 2019-09-07 21:09:32.892215100 -0700 Config.in
2019-09-04find: support -printf \0 octal escapes and \c.Elliott Hughes
I think when I wrote this I tested the named escapes like \n and hex escapes, and when I found \x wasn't supported I didn't even think of octal. And I only learned about \c when I was looking at echo and printf to compare their escape implementations a few weeks back. Add the missing escapes and corresponding tests. Fixes #139.
2019-09-04ls: fix -Z, add a test.Elliott Hughes
This broke a netd test (but sadly in postsubmit rather than presubmit). Also add a trivial test that would at least have caught this bug. Bug: http://b/140453237
2019-08-30blkid.test: allow e2fsprogs' blkid too.Elliott Hughes
This lets me see the _meaningful_ differences between toybox and e2fsprogs, which is probably good for the health of both. I've tried to get the whitespace fixed upstream a few times since 2017, but... (The current differences are that e2fsprogs doesn't support f2fs labels, and outputs reiserfs labels after the uuid rather than before.) On the util-linux front, although my patch earlier this month fixed the tests against util-linux 2.32, I now have 2.33 on my laptop, and that's added a new LABEL_FATBOOT field :-/
2019-08-30ls: fix recent regression.Elliott Hughes
Commit c26870dab3462c6176936384b090df6b9ba46dee broke ls' error reporting for files that don't exist. `ls $F` is used by some as an equivalent of `test -e $F`. This patch also adds a regression test.
2019-08-30find: fix -name corner case.Elliott Hughes
This fixes the case where someone's done something (weird) like: find src/*.c -name foo.c Previously the match would fail because one side of the comparison was already a path.
2019-08-28Fix find(1) after c26870dab346.Elliott Hughes
Unlike ls, find does treat ENOENT specially. Add an extra test (and fix the behavior) for the case of ENOENT for a path provided on the command line --- unlike other ENOENT cases (typically dangling symlinks), ENOENT for a command line argument should report an error. Also remove obsolete `|sed` from the symlink loop test.
2019-08-21Add some 2>/dev/null to tests that produce gratuitous stderr output.Rob Landley
2019-08-19Fix bad test.Rob Landley
2019-08-19echo/printf: expand test cases, fix \x corner cases.Elliott Hughes
The behavior with "\xAV" (where the second hex digit is invalid) is different from the behavior with "\xVA", and echo and printf differ from each other.
2019-08-15find.test: allow any error message about symlink loops.Elliott Hughes
glibc says "Too many levels of symbolic links", but BSD says "Too many symbolic links encountered". Until it becomes a problem, allow any error message.
2019-08-12find.test: fix flakiness.Elliott Hughes
Don't depend on directory iteration order in a test.
2019-08-12blkid: add -s, SEC_TYPE, f2fs LABEL, and fix vfat/ntfs UUID.Elliott Hughes
This gets the tests passing with both toybox and util-linux 2.32.1 blkid. We use -s to get around the fact that we still don't support ntfs' $VOLUME_NAME attribute.
2019-08-09blkid.test: match TEST_HOST expectations.Elliott Hughes
Missing SEC_TYPE for ext3, msdos, and vfat. Missing LABEL for f2fs and ntfs. Wrong endian of UUID for msdos, ntfs, and vfat.
2019-08-09find: fix dangling symlink behavior.Elliott Hughes
ENOENT is ignored, but other errors are reported.
2019-08-05du: disable the tests if we have SELinux.Elliott Hughes
ext stores extended attributes in a way that makes all the numbers in the test incorrect. For now, just disable the test in that case.
2019-07-27losetup.test: bail out if loopback devices are already in use.Elliott Hughes
There's probably a way to filter out the existing ones, but it's likely to be pretty painful and isn't immediately necessary. (I hit this case on Android cloud x86 devices.)
2019-07-27modinfo.test: bail out early if there are no modules.Elliott Hughes
We need /proc/modules *and* a directory of modules.
2019-07-27ifconfig.test: actually skip tests if dummy0 up fails.Elliott Hughes
Rather than just claim we're doing so. Android cloud emulators don't have dummy0 like regular devices do.
2019-07-26truncate.test: work around ext extended attributes space usage.Elliott Hughes
Weaken the test slightly so that the extra 4KiB used for SELinux is ignored. Unfortunately all the du tests suffer the same problem, and I'm less sure what to do there. Mounting a read-only file system without the extended attributes might be the best idea? But since this test modifies the file system...
2019-07-26hostname: fix tests for non-root on Android.Elliott Hughes
On Android you can't even get the hostname unless you're root, to avoid device fingerprinting/tracking. Also modernize by using skipnot, which fixes the incorrect test name in the SKIP: output.
2019-07-25killall: implement -w.Elliott Hughes
This isn't currently used in AOSP, but it is used in some of the other codebases I can easily search, and it's a better fix for test flakiness than inserting a sleep.
2019-07-25killall.test: fix flakiness.Elliott Hughes
And when I say "fix", I mean "hack around in the worst possible way". Android+mksh is often slow enough that we can do the pgrep before the killed process has actually exited. (I'm seeing roughly 100% failure rate on cloud x86 emulators, and about 75% on a real Pixel 2.)
2019-07-24tests: fix for empty /etc/passwd or /etc/group.Elliott Hughes
It turns out some Android devices have an empty /etc/passwd and/or /etc/group, which was defeating the previous workaround. Switch to testing the intention more directly: we'll try the file in /etc, and if that didn't work, we'll assume we need a workaround.
2019-07-22test.tar: fix tar tests on Android.Elliott Hughes
There's no /etc/group on Android. Loop devices are in different places, but that test doesn't seem to offer anything beyond the block/char special device tests later, so remove that rather than fix it. Fix the block/char special tests (the expectations were missing, but they're never normally run on the host because the mknod fails). Likewise add the missing expectation to the "ownership" test, which isn't normally run on the host because the chown fails. The "sparse without overflow" test was broken because of the mksh/bash disagreement about whether in `VAR=val shell_function` that's a temporary assignment to VAR or one that outlives the command. Switch SUM to being a function like LST before it. Also rewrite the TARHD stuff because Android (a) doesn't have hd and (b) doesn't have process substitution in its shell. (I wish I'd noticed TARHD earlier --- I'd been manually sending the tar files to xxd for debugging instead!) With this patch, all the tar tests now pass for me on both the device and host.
2019-07-16Fix unaligned access, tweak test suite.Rob Landley
2019-07-16grep: fix two bugs found by hwasan.Elliott Hughes
The first bug appeared as a memory overwrite, but was actually visible without hwasan: basically any `grep -F` that let to multiple matches on the same line was broken. The second bug was another memory overwrite, visible when I ran the existing grep tests. Bug: http://b/137573082
2019-07-12diff: implement --strip-trailing-cr.Elliott Hughes
Used by some ART tests and also some LLVM tests. (The motivating example is the latter, but I noticed the former when looking for other users.) Bug: http://b/137298656
2019-07-12pidof: fix default behavior, add -x.Elliott Hughes
Before this patch, we're effectively doing `pidof -x` all the time. This patch changes names_to_pid() to allow us to say whether or not we want to include scripts, and adjusts the callers appropriately. Also add tests for `pidof` versus `pidof -x` which pass after this patch, without regressing the existing killall tests.
2019-07-12grep: add -R as well as -r.Elliott Hughes
On BSD these are actually the same, and there's a -S that you need in addition. So strictly this is a behavior change for Android (which is going from BSD grep to toybox grep), but it's a behavior preserving change for the AOSP build (which is going from GNU grep to toybox grep), and the latter actually has a checked-in use of -R where the former doesn't.
2019-07-11env.test: fix new test for toybox echo.Elliott Hughes
The test relied on the non-builtins not being toybox (or another multicall binary). A multicall binary will actually look at the symlinked name (in this case "true") and do what it says on the tin. Use a tiny shell script instead.
2019-07-10dd: iflags, oflags, fix ^C, fix the fundamental loop.Elliott Hughes
Investigating why the toybox tar tests fail on Android with toybox dd, I realized I was rewriting a part of dd I'd rewritten before! This is a re-send of my 2019-02-22 patch, rebased against the current ToT... This patch was originally motivated because after suggesting to the author of https://stackoverflow.com/questions/17157820/access-vdsolinux/54797221#54797221 that he could tell dd to work in bytes rather than blocks, I realized that our dd doesn't actually support that. But the rewrite of the main loop is necessary to fix the incorrect output from the dd calls in the tar test. Without this patch, `yes | dd bs=65536 count=1 > fweep` basically gives random output, based on how many bytes the pipe feels like giving you in your first read. (As far as I know, dd *without* bs= was fine, but I can't guarantee that that's true, just that I haven't seen it fail.) Also switch to TAGGED_ARRAY and comma_* for conv rather than add two more copies of an undesired idiom. It turned out -- contrary to the belief of cp(1) -- that comma_scan isn't suitable for this because of its magic handling of "no" prefixes. (It's actually harmless in cp because none of the --preserve options begin with "no", but some dd options do.) To this end, comma_remove is a less-magic comma_scan. I've also changed an `if` to a `while` because other implementations allow things like `--preserve=mode,mode` or `conv=sync,sync`. (If we decide this is a bug rather than a feature, we should at least fix the error message to be clear that we're rejecting the *duplication*, not the option itself.) I've also fixed the ^C behavior by simply adding a direct SIGINT handler rather than trying to be clever inside the read loop (which is why we weren't handling the SIGINT until the read returned). I've also removed `strstarteq` and just added the '=' to each literal when calling regular `strstart`. Plus basic tests.
2019-07-09dd: fix seek= on stdout.Elliott Hughes
2019-07-06killall: better handling of long names.Elliott Hughes
Change names_to_pid() so that we can actually match shell scripts with long names (the code to get the shell script's name was correct, but there was an extra test preventing us from actually comparing it to the sought name). In kill.c itself, remove a dead test for -l and switch to the FLAG() macro. Also extend the tests to explicitly cover long and short names.
2019-07-06ifconfig.test: disable the pointopoint tests.Elliott Hughes
These tests don't work for me as root on either my Debian desktop or my Android devices. The original mail thread implies that they were as close as the original comitter could get to _something_ that seemed to work, even if the kernel doesn't seem to bother with this: http://lists.landley.net/pipermail/toybox-landley.net/2014-November/003795.html toybox ifconfig *is* missing support for `-pointtopoint` and `pointopoint` (without an addess), similar for `broadcast` according to the man page. But since we don't appear to have a way to test this (other than looking at strace output!) I'm leaning towards YAGNI anyway...
2019-07-06Add comment and test.Rob Landley
2019-07-03nl: nl -vEric Molitor
Implement nl -v supporting negative and zero starting values.
2019-06-28modinfo: various small fixes.Elliott Hughes
Improve Android support (see code comments). Remove unnecessary fixed-length limits. Show error if module not found (plus test). Expand help text. Switch to FLAG macro. Stop hard-coding module assumptions in the tests.
2019-06-28split.test: don't rely on bash process substitution.Elliott Hughes
mksh doesn't support process substitution, so use an explicit temporary file.
2019-06-28file, stat: various small improvements.Elliott Hughes
file now shows the target of a symbolic link and calls out broken symbolic links. file now shows the device type for block/character special files. file now shows specific reason when it can't open. stat now includes the device type, plus a little more space between the number of blocks and the human-readable file type. Adjusted tests accordingly, which actually makes more of them pass on the host as a convenient side-effect, but I actually made these changes because I've been finding the desktop file and stat output more convenient in these cases.
2019-06-27touch.test: add missing `TZ=utc`s.Elliott Hughes
I don't know why we fixed the other tests but not this one. Before this patch it's failing with/without TEST_HOST. After this patch, it passes both.
2019-06-26losetup: fix Android.Elliott Hughes
Use /dev/block/loop* more uniformly, and teach the tests which to expect.
2019-06-26Fix cp.test to pass even if you're root or have a restrictive umask.Elliott Hughes