aboutsummaryrefslogtreecommitdiff
path: root/toys/posix
AgeCommit message (Collapse)Author
2019-09-04find: support -printf \0 octal escapes and \c.Elliott Hughes
I think when I wrote this I tested the named escapes like \n and hex escapes, and when I found \x wasn't supported I didn't even think of octal. And I only learned about \c when I was looking at echo and printf to compare their escape implementations a few weeks back. Add the missing escapes and corresponding tests. Fixes #139.
2019-09-04ls: fix -Z, add a test.Elliott Hughes
This broke a netd test (but sadly in postsubmit rather than presubmit). Also add a trivial test that would at least have caught this bug. Bug: http://b/140453237
2019-09-04DIRTREE_STATLESS doesn't have to test 3 stat fields, it sets a flagRob Landley
2019-08-30ls: fix recent regression.Elliott Hughes
Commit c26870dab3462c6176936384b090df6b9ba46dee broke ls' error reporting for files that don't exist. `ls $F` is used by some as an equivalent of `test -e $F`. This patch also adds a regression test.
2019-08-30find: fix -name corner case.Elliott Hughes
This fixes the case where someone's done something (weird) like: find src/*.c -name foo.c Previously the match would fail because one side of the comparison was already a path.
2019-08-29diff and patch: support special characters in filenames with quoting as well ↵William Haddon
as unusual timestamp formats After further research and testing, I've produced a patch which handles all filenames with special characters by copying the GNU quoting behavior, and also treats anything following a tab as a timestamp. This increases both ability to handle possible filenames and ability to apply patches found in the field. In diff, quote and escape filenames according to the following rules. * Surround the filename with quotes if it contains a byte less than 0x20, a byte greater than or equal to 0x80, space, backslash, or quote. * Replace alert, backspace, form feed, newline, carriage return, tab, vertical tab, backslash, and quote with \a, \b, \f, \n, \r, \t, \v, \\, and \", respectively. * Replace other bytes less than 0x20 or greater than or equal to 0x80 with a backslash followed by the three octal digits representing the value of the byte. * Treat valid UTF-8 characters involving sequences of bytes greater than or equal to 0x80 the same as other sequences of such bytes. In patch, process quoted and escaped filenames according to the following rules. * If the filename does not begin with a quote, do not modify the filename. * Remove quotes surrounding the filename. * In quoted filenames, replace \a, \b, \f, \n, \r, \t, \v, \\, and \" with alert, backspace, form feed, newline, carriage return, tab, vertical tab, backslash, and quote, respectively. * In quoted filenames, replace a backslash followed by octal digits with the byte with that value in octal. Also, in patch, treat anything on a +++ or --- line following a tab character after the beginning of the filename as a timestamp, rather than part of the filename.
2019-08-28Fix find(1) after c26870dab346.Elliott Hughes
Unlike ls, find does treat ENOENT specially. Add an extra test (and fix the behavior) for the case of ENOENT for a path provided on the command line --- unlike other ENOENT cases (typically dangling symlinks), ENOENT for a command line argument should report an error. Also remove obsolete `|sed` from the symlink loop test.
2019-08-26xargs: add --max-args synonym, -o option, and fix -p.Elliott Hughes
The Linux kernel uses the --max-args synonym for -n. Barbarians who use vi need xargs' -o to be able to do something like: find -name xargs.c | xargs vi # Sad vi. find -name xargs.c | xargs -o vi # Happy vi. The -p option needs fixing to read from /dev/tty because stdin is otherwise occupied in xargs. I think xargs is the only place that needs this, so it didn't seem sensible to make all callers to yesno() be specific about which they wanted, hence the new function. Also remove the documentation for the build-time XARGS_PEDANTIC option which isn't actually implemented. Also add a TODO for -P (which is used by at least one script in the Linux kernel).
2019-08-26Try to make ls failure more graceful. Print ? ? ? entries instead of error msg.Rob Landley
Tweak DIRTREE_STATLESS so it returns zero stat for any error (I'm testing that dev, ino, and blksize are all zero), and fill in file type from readdir()
2019-08-23getconf: remove workaround for old NDKs.Elliott Hughes
macOS remains awkward, though, but this retains our Android/Linux behavior and is closer to the platform's getconf(1) for macOS. Strictly macOS denies all knowledge of UIO_MAXIOV, but the "undefined" you'll get from this patch seems closer than the "1024" we used to give.
2019-08-23rm: error message consistency.Elliott Hughes
Before: $ ./rm rm: Needs 1 argument $ ./rmdir rmdir: Needs 1 argument (see "rmdir --help") After: $ ./rm rm: Needs 1 argument (see "rm --help")
2019-08-19echo/printf: expand test cases, fix \x corner cases.Elliott Hughes
The behavior with "\xAV" (where the second hex digit is invalid) is different from the behavior with "\xVA", and echo and printf differ from each other.
2019-08-15Fix two typos.Elliott Hughes
2019-08-12sort: move off get_rawline.Elliott Hughes
This was the last user of get_rawline, which lets us remove it.
2019-08-09find: fix dangling symlink behavior.Elliott Hughes
ENOENT is ignored, but other errors are reported.
2019-08-04Add TOYFLAG_MAYFORK and annotate a couple commands.Rob Landley
A TOYFLAG_NOFORK command must run in the context of toysh, but a MAYFORK can either run standalone or run in the toysh process. MAYFORK means it cleans up after itself: no leaked resources (malloc, mmap, filehandles, etc), even in error_exit() paths that would longjmp() back to the shell. It also doesn't discard anything we need to retain (don't close stdout, change toys.optargs[] so we can't free it, etc)...
2019-07-31Move the empty regex workaround into xregcomp.Elliott Hughes
No current caller except grep needs this, but consistency seems like a good idea. Also change the xregcomp error message to be a bit more human-readable, rather than mention an implementation detail.
2019-07-30Fix signed typecast bug.Rob Landley
We use (char *)1 and (char *)2 to indicate errors (they can never be valid pointers because both malloc() and mmap() return aligned memory and those align down to NULL, plus Linux maps 4k at the bottom to catch null dereferences anyway), and then typecast it to long (trusting in LP64) to do an integer <=2 comparison... except that needs to be UNSIGNED long or else pointers in the top half of the virtual memory space become negative and the <=2 false positives them as errors. (Oops.)
2019-07-29grep: fake GNU behavior for non-POSIX empty regex.Elliott Hughes
POSIX says there's no such thing as an empty regular expression. The grammar excludes the possibility: https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html BSD agrees with POSIX, and Android and macOS' BSD-based implementations reject the empty regular expression. GNU apparently disagrees. Luckily, BSD does accept the empty *sub* expression `()`, despite their error message for REG_EMPTY being "empty (sub)expression". This is presumably a bug, except there's explicit code to support it that is at least 26 years old: https://github.com/freebsd/freebsd/blame/master/lib/libc/regex/regcomp.c#L383 This workaround also works fine with glibc. If we want GNU behavior, I'm struggling to come up with another way to fake it. If we want POSIX behavior, we could easily just add a check to reject "" on glibc. Also switch to xregcomp().
2019-07-23nl: switch from getline() to loopfiles_lines().Elliott Hughes
This was basically just to help me think out loud while discussing loopfiles_lines().
2019-07-22Start replacing get_line() with getline().Elliott Hughes
I started this last night, but thought I'd aim to send multiple small patches rather than work through all the callers and send one big patch. I've deliberately chosen the ugly name `allocated_length` because we've had historical bugs where folks think this a line length in the sense of the return value. I do wonder whether we should actually have some kind of getline() wrapper that hides the `char *`/`size_t` pair in lib/, which makes the function easier to use in most cases but does add the less common gotcha that you wouldn't be able to getline() through multiple files at once (which does happen in at least one toy). But maybe the real fix is to look harder for places where we can just use loopfiles_lines? Speaking of which, should we actually add two more arguments to that? Specifically: switch it to getdelim() rather than getline() behind the scenes, and also add a way to have the trailing '\n' automatically removed, since that seems to be what most callers want? Anyway, that seemed like enough questions that it was time to send this initial patch out before doing too much more...
2019-07-19xargs: don't pretend to support -I.Elliott Hughes
This was embarrassing... A build script that was using xargs -I silently started to ignore -I when we switched over to toybox xargs. The owner of the script has rewritten it to use the shell read builtin instead, but it's pretty unhelpful to silently ignore an option that radically changes how xargs behaves. (The -I behavior sounds sufficiently different from normal behavior that I'm not sure I've understood, and am just sending this cleanup rather than actually implementing -I correctly.) Bug: http://b/137832162
2019-07-16Fix unaligned access, tweak test suite.Rob Landley
2019-07-16grep: fix two bugs found by hwasan.Elliott Hughes
The first bug appeared as a memory overwrite, but was actually visible without hwasan: basically any `grep -F` that let to multiple matches on the same line was broken. The second bug was another memory overwrite, visible when I ran the existing grep tests. Bug: http://b/137573082
2019-07-12grep: add -R as well as -r.Elliott Hughes
On BSD these are actually the same, and there's a -S that you need in addition. So strictly this is a behavior change for Android (which is going from BSD grep to toybox grep), but it's a behavior preserving change for the AOSP build (which is going from GNU grep to toybox grep), and the latter actually has a checked-in use of -R where the former doesn't.
2019-07-11xargs: bug compatibility with BSD/busybox/findutils.Elliott Hughes
The other xargs implementations in the wild don't seem to count the space taken by each `char *`. Go for bug compatibility unless future experience proves that to be a bad idea.
2019-07-10dd: iflags, oflags, fix ^C, fix the fundamental loop.Elliott Hughes
Investigating why the toybox tar tests fail on Android with toybox dd, I realized I was rewriting a part of dd I'd rewritten before! This is a re-send of my 2019-02-22 patch, rebased against the current ToT... This patch was originally motivated because after suggesting to the author of https://stackoverflow.com/questions/17157820/access-vdsolinux/54797221#54797221 that he could tell dd to work in bytes rather than blocks, I realized that our dd doesn't actually support that. But the rewrite of the main loop is necessary to fix the incorrect output from the dd calls in the tar test. Without this patch, `yes | dd bs=65536 count=1 > fweep` basically gives random output, based on how many bytes the pipe feels like giving you in your first read. (As far as I know, dd *without* bs= was fine, but I can't guarantee that that's true, just that I haven't seen it fail.) Also switch to TAGGED_ARRAY and comma_* for conv rather than add two more copies of an undesired idiom. It turned out -- contrary to the belief of cp(1) -- that comma_scan isn't suitable for this because of its magic handling of "no" prefixes. (It's actually harmless in cp because none of the --preserve options begin with "no", but some dd options do.) To this end, comma_remove is a less-magic comma_scan. I've also changed an `if` to a `while` because other implementations allow things like `--preserve=mode,mode` or `conv=sync,sync`. (If we decide this is a bug rather than a feature, we should at least fix the error message to be clear that we're rejecting the *duplication*, not the option itself.) I've also fixed the ^C behavior by simply adding a direct SIGINT handler rather than trying to be clever inside the read loop (which is why we weren't handling the SIGINT until the read returned). I've also removed `strstarteq` and just added the '=' to each literal when calling regular `strstart`. Plus basic tests.
2019-07-06file: fix xz, add a few other Android types.Elliott Hughes
"xz compressed data" was missing a newline. Also switch a couple of other unnecessary (but correct) xprintf calls over to xputs. Also add .otf fonts, perf/simpleperf data files, and Android boot images, sparse images, and device tree blobs/overlays.
2019-07-06Add comment and test.Rob Landley
2019-07-06Have env exec, not recurse to builtin.Denys Nykula
My app runs npm i -S better-sqlite3, and node-gyp-bin from the npm upstream has #!/usr/bin/env sh, expecting the system shell.
2019-07-03nl: nl -vEric Molitor
Implement nl -v supporting negative and zero starting values.
2019-06-28file, stat: various small improvements.Elliott Hughes
file now shows the target of a symbolic link and calls out broken symbolic links. file now shows the device type for block/character special files. file now shows specific reason when it can't open. stat now includes the device type, plus a little more space between the number of blocks and the human-readable file type. Adjusted tests accordingly, which actually makes more of them pass on the host as a convenient side-effect, but I actually made these changes because I've been finding the desktop file and stat output more convenient in these cases.
2019-06-25tar: implement --mode.Elliott Hughes
Used by build/make/tools/mktarball.sh in AOSP. (Which is why today's switch to toybox tar got reverted.)
2019-06-23Switch cp.c to FLAG() macros.Rob Landley
2019-06-22Use FORCE_FLAGS in kill.c.Elliott Hughes
Otherwise kill flags don't work unless killall5 is also configured. Also switch to the FLAG() macro.
2019-06-22Fix mv with trailing slash in source.Denys Nykula
Press tab, have bash complete dir name with a slash, notice musl rename() dislikes that. Replace trailing slash in the cp loop with a null character, if the command name is mv. Add the slash back if an error occurs.
2019-06-21Fix cp -r dir/. symlink child.makepost
Remove the existing link before trying to re-create, passing the test. Add -p to the -r test as a regression guard, portage calls cp with both.
2019-06-11find: add -true/-false.Elliott Hughes
Used near the end of the AOSP build. Almost there! (This patch also fiddles with the help text to be able to slip the new options in without requiring so much extra space.)
2019-06-10Improve signal name<->number conversions.Elliott Hughes
Include all the signals, not just the POSIX ones. In particular, improve support for real-time signals. My attempt to switch AOSP builds over to toybox timeout got reverted when I broke the ART build bots which use SIGRTMIN+2. Also fix `kill -l 3` to show "QUIT" and `kill -l QUIT` to show "3". Also make the `kill -l` output include numbers and names, and format it to look better on a 80x24 tty, because it's always August 1978 somewhere.
2019-06-08macOS: numerous fixes.Elliott Hughes
This patch adds a BSD version of xgetmountlist (for the path == NULL case only), tested on macOS. It also papers over the differences between macOS' and Linux's xattr APIs. For once I think the macOS one is better. The imitation of mknodat I've had to write swings things back in Linux's favor though. BSD calls f_frsize by the name f_iosize instead. (FWIW, it looks like this is meaningless on Linux and actually meaningful on macOS.) I've added one #if to toys/ --- I'm calling pathconf in stat.c to work around the absence of f_namelen, and have left a TODO with an explanation. I'm not sure what the best fix is here, so punting. No-one can agree what f_fsid is, even if they're all basically the same, so work around the `val` versus `__val` issue between macOS and Linux. With this patch, it's now possible to build cp/mv/install and stat for macOS too. (Which completes the set of "toybox commands currently used on Linux as part of the AOSP build" if you ignore stuff that deals with processes, which I doubt we'll ever be able to support for lack of any API.)
2019-06-07Implement stat %C and find %Z.Elliott Hughes
We'd documented find %Z but not implemented it. We'd neither documented nor implemented stat's corresponding %C (they'd already taken %Z for ctime, which is ironic because %c/%C sounds more obvious than %z/%Z for that to me).
2019-06-03Remove TAIL_SEEK config option, just always include it.Rob Landley
Yeah, it's twice the size and two codepaths, but seekable is the common case, it won't work in pipelines without a non-seek codepath, and the performance penalty not using seek on large files is a enormous.
2019-06-01Teach file to recognize xz archives and old style tarballs.Rob Landley
2019-06-01Teach tar to extract older tarballs.Rob Landley
2019-05-29Teach find -printf about %.Ns patterns, tweak help text, add tests.Rob Landley
2019-05-26Teach sed about +N range ending.Rob Landley
2019-05-25find: add -printf support.Elliott Hughes
This only implements the format specifiers that I've seen used in the wild (which is actually a significant fraction of the total supported by findutils' find). The most obvious gap is in the time support. I'm happy to add more, but didn't want to add stuff "just because". I'd say %A@, %C@, and -- for SELinux users -- %Z are probably the most plausibly useful formats still missing. I don't think the human-readable date formatting is particularly useful unless someone's seen it actually used in the wild. The %T+ "full ISO" format being the most likely exception to that. Anyway, this is enough for me get started building AOSP with toybox find.
2019-05-25grep: add --exclude-dir.Elliott Hughes
Used quite a lot, especially with `--exclude-dir=.git`.
2019-05-25time: fix -v output.Elliott Hughes
Copy-and-paste mistake from the regular output. Bug: http://b/133502489
2019-05-25Move notify.c into portability.c (collate the #ifdefs), move global variablesRob Landley
into a structure passed as arguments, add x prefix to functions that can fail, add overflow test.